Search Results

Search found 18488 results on 740 pages for 'android networking'.

Page 261/740 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

• Backup networks

  - by MegaBrutal

  My USB Wi-Fi adapter tends to overheat and when it happens, it stops working until I pull it out and plug it in again. Since I often access my machine remotely from other places, when it happens, my machine gets inaccessible for me until I get home to fix it. I'm thinking, I have another USB Wi-Fi adapter in spare. Would it be possible to plug it in that too but tell Ubuntu to only use it when the primary Wi-Fi adapter becomes off-line? (I won't use the other Wi-Fi adapter as primary because it provides significantly less quality.)

  Read the article

• lshw not showing network

  - by triunenature

  Output: {User}@{Computer}:~$ sudo lshw -class network {User}@{Computer}:~$ Another Test: {User}@{Computer}:~$ lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) <<---- Network Card???? 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 (rev 70) 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1) If you look at 00:07.0 I believe that is the network card. However lshw doesnt show it. I mainly need information on network speed 10MBpS/100MBsP/1000MBpS Though knowing why my system isn't working would be nice.

  Read the article

• MAC filtering after DHCP

  - by user1655161

  How to manage filtering by MAC in Ubuntu? Scenario: Ubuntu DHCP is configured and working (network 192.168.1.0) a) Laptop 1 is set in configuration on Ubuntu as static IP Laptop 1 is configured for automatic IP and when is connected to server everything works. I'm taking laptop 2 which is configured as static IP 192.168.1.10 and his configuration is not set in Ubuntu dhcpd.conf After laptop 2 is connected internet working. It is possible to do MAC filtering which disallow to connect PCs with address IP set as static but MAC address is not configured in Ubuntu (something like: intruder in network)?

  Read the article

• can't open youtube or vimeo

  - by wrt

  I can't open Youtube.com on computer with lubuntu and mint. I see that my flash works properly on other sites. Problem is in for example on youtube (yming.com loading without endless) and vimeo. I tried to use firefox and chromium. I thought that it would be problem with dns (I have dns from DHCP - opendns) so I changed to google dns but it didn't help to solve problem. When I use text browser - Links these site are opening well in text mode. I think that the problem is with flash or java. On other computer with windows connected to the same network these sites are being opened without problem. I am on the point that I don't know what to do next, because I tried to install and uninstall flash several times. I tried Flash-Aid as well.

  Read the article

• Looking for open-source solutions for a knowledge sharing website

  - by Bundarr

  There is a need in my workplace to setup a knowledge sharing site, a place where users can discuss projects they are working share documentation ask questions I am looking for a open-source system that answers these needs, and that can be setup in a week, and requires only PHP and MySQL. I am a Wordpress fan and developer and could easily implement such a system in Wordpress, however this system needs to be very simple to use for the technically challenged. Without customization, Wordpress users would still need to login to the "back-end" to post. I like the Stackexchange (OSQA) format, but these do not allow for file uploading out of the box. I do not have experience with Buddy Press, would this be an alternative?

  Read the article

• Data structure for file search

  - by poly

  I've asked this question before and I got a few answers/idea, but I'm not sure how to implement them. I'm building a telecom messaging solution. Currently, I'm using a database to save my transaction/messages for the network stack I've built, and as you know it's slower than using a data structure (hash, linkedlist, etc...). My problem is that the data can be really huge, and it won't fit in the memory. I was thinking of saving the records in a file and the a key and line number in a hash, then if I want to access some record then I can get the line number from the hash, and get it from the file. I don't know how efficient is this; I think the database is doing a way better job than this on my behalf. Please share whatever you have in mind.

  Read the article

• Fail to access Network options

  - by Konstantinos Marinis

  I am trying to use OpenDNS for my newly installed Ubuntu 12.10... However I cannot insert custom DNS addresses... I am accessing Network, then at my wireless connection, no matter how many times I press the "options" tab at the low right corner (I am not using english Ubuntu, so the button might have a different name), nothing happens. Any ideas why or how should I configure my OpenDNS connection?

  Read the article

• How to join a Windows Domain and Map Network Drives?

  - by AgainstClint

  I just installed the current build for Ubuntu on a partition for my work computer. I am a novice when it comes to Linux/Ubuntu, which is why I installed it along side windows. I want to learn how to operate and use Ubuntu much more than I do now, so I figured installing it and trying to do day to day functions here would be a "Thrown into the pool with sharks" way to do it, and I like that way. I did however have a few questions: We are on a Domain in Windows, is there any way to join that domain using the Ubuntu partition? We Also have 16 mapped network drives. I don't actually need ALL of them mapped for Ubuntu, but is there a way to Map at least one of them to see/use here in Ubuntu. Outlook Corporate email, how can I sign in/use it while...well, you get the idea. As I said earlier, I am VERY new to Ubuntu, i've only played around with it a bit at home and never at the office. If you could simplify it down for me a bit, that would be great.

  Read the article

• Network/browser issues after upgrade to 12.04

  - by Reg

  I let my laptop upgrade to 12.04. And have no network afterwards. I went through all the articles I could find in google. Right now, I can ping google, and yahoo, but not cnn.com for example or anything else. Firefox says it can't reach google.com or gmail.com (or anything, not even IP. /etc/network/interfaces dns-nameservers 8.8.8.8 <<<<<added auto lo iface lo inet loopback /etc/dhcp/dhclient.conf #prepend domain-name-servers 8.8.8.8,8.8.4.4; prepend domain-name-servers 127.0.0.1; <<<<< tried both /etc/NetworkManager/NetworkManager.conf with and without dns=dnsmasq commented out. I can ping my wireless router and connect to it just fine. Have tried proxy/noproxy. This looks like After Upgrade to 12.04 - cannot connect to network but no answer there. I would hate to do a fresh install. Any assistance appreciated.

  Read the article

• How can I refactor my code to use fewer singletons?

  - by fish

  I started a component based, networked game (so far only working on the server). I know why singletons can be bad, but I can't think of another way to implement the same thing. So far I have: A GameState singleton (for managing the global state of the game, i.e. pre-game, running, exiting). A World singleton, which is the root entity for my entity graph An EntityFactory A ComponentFactory I'm thinking about adding a "MessageDispatcher" so individual components can subscribe to network messages. The factories do not have state, so I suppose they aren't so bad. However, the others do have global state, which is asking for trouble. How can I refactor my code so it uses fewer singletons?

  Read the article

• Configuring network to set wlan0 as primary

  - by Sheed

  I recently had to rebuild my pc and decided to go for ubuntu 14.04. I think the mistake I made was I started from a 12.04 install disk instead of the 12.10 disk I'd used previously and when given the option set my primary connection as ethernet (because the wireless option didn't work). After upgrading to 14.04 etc, I managed to get the wireless working, or more using steps like ifconfig -a and the likes I managed to prove that the wireless card etc. is all installed and working. However every time I boot without a hard wired connection plugged in I get the message "waiting for network configuration". I can then once it's booted without a network get my wirless working using sudo ifconfig wlan0 up iwlist wlan0 scan This seems to kick the wireless module into life and it appears in the GUI and I can then select a network, however all the options like edit network and disconnect etc are all greyed out. What I would like of course is if the WLAN0 was just set as my primary default network so I've been looking for a solution to this and it would seem that I need to adjust the old /etc/network/interfaces file but when I try to do so using the sudo vi /etc/network/interfaces command I, well I simply have no idea what I'm doing. Other than that typing :q! gets me out of there before I do to much damage! As far as I can tell (by navigating to the file in the GUI) the output of my /etc/network/interfaces is as follows: (obviously not including the " in each line that's just to break the heading rule of the #) "# This file describes the network interfaces available on your system "# and how to activate them. For more information, see interfaces(5). "# The loopback network interface auto lo iface lo inet loopback "# The primary network interface auto eth0 iface eth0 inet dhcp If this is the case then this clearly doesn't contain what it should do but I don't how to fix it. Nor do I even know if I'm on the right track. Any help would be appreciated thanks :)

  Read the article

• Why does Ubuntu really slow down the rest of my home network?

  - by tympaniplayer

  I have a ubuntu Dekstop and a Windows 7 Desktop. The windows 7 is connected via wireless adapter and the ubuntu dekstop is connected via ethernet. The wireless adapter is capable of 300Mbps link speed. When my ubuntu is connected to the interet, the network becomes very very slow. I have a 15 Mbps cable broadband connection. I have had many devices connected at one with no problem, yet this one connection seems to be wreaking havoc.

  Read the article

• How do I turn off WLAN automatically when LAN is connected?

  - by derroman

  I use my Thinkpad laptop with a docking station. The docking station is connected to my router via LAN. When I walk around the house I use my laptop with WLAN. Is it possible (and how) to manage these devices with a script or something to work like this: If a LAN-Connection is up, the OS should turn off Wifi and if LAN-Connection gets lost (undocking) Wifi should turn on automatically. I use Ubuntu 11.04 64bit with Gnome 2. The system works on an Lenovo ThinkPad R500 with. WLAN-Device: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] LAN-Device: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) Any help would be appreciated. Thanks.

  Read the article

• Android and Linux are growing back together

  <b>Cyber Cynic:</b> "Google's Android, the increasingly important embedded Linux, has had one major problem. It had been moving slowly away from the Linux mainstream. Now, after the recent Linux Foundation Collaboration Conference, Android and Linux are coming back together."

  Read the article

• Common Network Administrator Tools

  - by No Time

  I would like to make a custom clump of Network Admin packages, to be able to carry on a thumb drive, to administer Debian based machines. Examples of what I would include so far: nmap traceroute vnstat zenmap * I know every situation may be different, but I would like to build a toolbox I could bring everywhere, and am looking for advice on other tools which would work. (If there is a similar question, I am fine being directed there)

  Read the article

• One Android To Rule Them All?

  <b>Steaming Open Cup:</b> "Speculations are rife that Google has finally decided to put an end to fragmentation in the Android OS. Will we really start seeing an overwhelming majority of Android smartphones running the same version?"

  Read the article

• Handling timeout in network application

  - by user2175831

  How can I handle timeouts in a network application. I'm implementing a provisioning system on a Linux server, the code is huge so I'm going to put the algorithm, it works as like this Read provisioning commands from file Send it to another server using TCP Save the request in hash. Receive the response then if successful response received then remove request from hash if failed response received then retry the message The problem I'm in now is when the program didn't receive the response for a timeout reason then the request will be waiting for a response forever and won't be retried. And please note that I'll be sending hundreds of commands and I have to monitor the timeout commands for all of them. I tried to use timer but that didn't help because I'll end up with so many waiting timers and I'm not sure if this is a good way of doing this. The question is how can I save the message in some data structure and check to remove or retry it later when there is no response from the other end? Please note that I'm willing to change the algorithm to anything you suggest that could deal with the timeouts.

  Read the article

• Installing Android on the iPhone - The Complete Guide

  <b>Tech Source:</b> "Do you feel jealous of your Android-using friends? Are you sick and tired of your iPhone's locked up OS? Are you fearless enough to install Android on the iPhone?"

  Read the article

• Why is user "lightdm" trying to log into my SBS 2003?

  - by user652740

  I have 7 Ubuntu desktops connected to a SBS 2003 using Centrify. I have a rather weird scenario, whereby a user with the name lightdm is trying to log into our server, possibly automatically. I thought lightdm was the session manager, not a user? Does anybody know what could be causing this? There is no user: "lightdm" on the server and the problem only comes from one of the 7 internal desktops connected to the server (its IP address is in the local network).

  Read the article

• My ethernet connection is not working but it is detected by my computer

  - by smithy545

  I'm setting up an old computer with ubuntu server 12.04. I wiped the drive and went through the installation fine but afterwards the ethernet would not work. It's physically connected to the router and the card is recognized by lspci(SiS 900) but it won't connect at all. I've plugged in and installed the drivers for a wifi adapter and it's worked with the same router. Just so you know I've turned it on and off plenty of times. Any help would be appreciated.

  Read the article

• Linux does not connect to wireless network under Hyper-V with Windows 8

  - by Graznarak

  I have a VM I am trying to run under Hyper-V on Windows 8 Pro. I am using an Asus PDE-N15 adapter on the host machine. When I run Windows 8 in the VM it connects to the network and everything works. When I use Linux (Ubuntu 13.04 32-bit, Ubuntu 13.04 64-bit, Fedora, CentOS) it will not connect to the network. When I run ifconfig I see the adapter show up as eth0 with the correct HWaddr. I see that TX bytes 0, and RX bytes == 0. Could anyone help me figure out how to get this to work?

  Read the article

• error: gnutls_handshake() falied

  - by Nyambaa

  When I try to connect any HTTPS server with git, it gives following error: error: gnutls_handshake() failed: A TLS packet with unexpected length was received. while accessing ... fatal: HTTP request failed So I think that maybe some packages that related the gnutls_handshake has been broken. So I want to reinstall that packages, which packages can be related this errors? or how do I fix this kind of error?

  Read the article

• Connection make b/w iphone to windows pc-rajay [on hold]

  - by Rajay

  I Need to create connection between ios to windows by using socket programming in ios. I'm trying to to use an application to communicate with Windows via sockets. At the minimum, I'm trying to at least figure out how I can create a connection from the iPhone (maybe using the iPhone to ping the Windows machine?) I'm not really clear on where I need to start. I'm pretty new to iOS development in general, and brand new to socket/network programming. I've tried several tutorials that haven't gotten me far. My goal is: Connect to a server via sockets (the server will be a Windows machine with a service waiting for incoming connections from the iPhone) If possible, I would like to write/build the client piece first, but I have been lost thus far. Hopefully the nice folks in the SO community can lend a hand and point me in the right direction.

  Read the article

• Android connait une croissance record, un graphique présente son évolution sur les 18 derniers mois

  Mise à jour du 27.05.2010 par Katleen Android connait une croissance record, un graphique présente son évolution sur les 18 derniers mois Un visuel infographique très complet, retraçant l'évolution d'Android au cours des 18 derniers mois. Il s'appuie sur les dernières statistiques dévoilées par Google il y a quelques jours lors de sa conférence I/O. Des chiffres rassurants suite à l'abandon des logiciels de Google au profit de ceux de Microsoft par plusieurs constructeurs. Les points clés transmis par ces i...

  Read the article

• Upgraded from 11.10 to 12.04 now no network access

  - by MadeTheLeap

  A few weeks ago I decided I should enter the Linux world and read that Ubuntu is the most widely used release. I installed version 11.10 and it worked perfectly. Just this past week I decided I would do the upgrade to 12.04. The upgrade process itself worked fine. However, when I logged in I no longer had a network connection. I am running an AMD-based PC with a D-LINK DFE-530TXS network card and as I said, it worked fine in 11.10. I have scoured the Internet and come across a thousand slightly varying solutions, but they are too convoluted for someone new to Linux. Not because I can't follow the steps, but because most of the tools/utilities that are referenced (e.g. to compile, install, etc.) are not available when I use the stated steps in the solutions. So....should I re-install 11.10 or is there hope in getting this version to use the NIC that I know works. I have the latest driver from d-link for my NIC but I have no idea how to 'install' it for Ubuntu 12.04 to use. I know you will require additional information, but I wasn't sure what you would need. Thanks in advance.

  Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >