Search Results

Search found 11231 results on 450 pages for 'bad alloc'.

Page 261/450 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

  • IRQ Conflicts Causing Video Card and Boot Problems?

    - by sanpatricio
    tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

    Read the article

  • Weird system freeze. Nothing works keyboard/mouse/reset button - Ubuntu 12.04 64bits [closed]

    - by Simon
    I have fresh PC: i5 3570K with Intel 4000 onboard ASrock Z77 Extreme4-m 8GG RAM - Adata 1333Mhz... 1TB Seagate drive 7200rpm I've also fresh systems - Ubuntu/Win7 and today there was something strange. Ubuntu twice just freezed. Everything stopped, even keyboard and mouse wasn't responding. Even RESET button didn't work. Right now memtest is running, but I'd like to know, where else can i look for cause. Can it be software fault if even reset isn't working? Only long reset pressing rebooted PC... I'm a bit confused. Or should I test components - CPU, motherboard, disk. Which logs in Ubuntu should I check to diagnose cause? EHm I had few adventures with this PC already. Shipped motherboard was broken (ASrock Z68 Extreme3) and had old bios, so I had to contact with reseller, replace it and at the end decided on Z77, but everything took 3 weeks, so I have bad feelings... Edit: Both freezes were during editing something in gedit (it can be coincidence) and after few updates today - when memtest is end I'll check what was updated

    Read the article

  • Partner Webcast - Oracle Taleo Cloud Service - 12 Dec 2012

    - by Thanos
    Talent Intelligence is the insight companies need to unlock the power of their most critical asset – their people. CEOs are charged with driving growth, and the one ingredient to growth that’s common across all industries and regions - both in good economic times and in bad – is people. In every economic environment, Talent Intelligence is a company’s biggest lever for driving growth, innovation and customer success. Oracle Taleo Cloud Service provides a comprehensive suite of SaaS products that help companies manage their investment in people by improving their Talent Intelligence. The Oracle Taleo Cloud Service enables enterprises and midsize businesses to recruit top talent, align that talent to key goals, manage performance, develop and compensate top performers, and turn today's best performers into tomorrow's leaders. Join us to find out more about the industry's broadest cloud-based talent management platform. Agenda: Oracle HCM Footprint Taleo value proposition Taleo quick tour Why invest in Taleo resources Demonstrating Taleo Q&A REGISTER NOW Delivery Format This FREE online LIVE eSeminar will be delivered over the Web. Registrations received less than 24 hours prior to start time may not receive confirmation to attend. Duration: 1 hour For any questions please contact us at [email protected]. Visit our ISV Migration Center blog Or Follow us @oracleimc to learn more on Oracle Technologies, upcoming partner webcasts and events. Existing content available YouTube - SlideShare - Oracle Mix.

    Read the article

  • Wrong resolution for Lightdm/GDM on Ubuntu 13.04 using HDMI

    - by f03lipe
    I've tried all the solution I could find on the matter so far, but the error persists. My problem is that the login screen (both under gdm and lightdm) runs with the wrong resolution, even though all is fine when I log in. The error occurs solely when I have my HDMI cable connected to my other screen. The login screen resolution becomes 1024x768 (for my 1366x768 laptop screen) and mirrored on my screen, which is 1920x1080. I've had this issue on version 12.04 (the last one before I upgraded to 13.04), but I got it fixed by adding the xrandr commands on the begining of the /etc/gdm/Init/Default file. This doesn't seem to work anymore. I've also tried telling lightdm to run a script fixing the resolution with xrandr (by editing /etc/lightdm/lightdm.conf), but lightdm crashes, and I'm forced to log in with low graphic settigs. Hint: when ubuntu is loading, the resolution starts OK, then goes bad right before the login screen is initialized. Does that mean that there's nothing wrong with my graphic cards? What do you think? Cheers!

    Read the article

  • Why is Ubuntu One slow to sync in 11.10, either backup or any sub-folder contents?

    - by pst007x
    I have been trying to sync my documents folder of 1.4GB, it still hasn't worked and it has been syncing for a month. The top level syncs, files and folders in the Document folders, but contents of sub-folders just hang. (Gave up and stopped syncing this folder) However,I have tried using the backup facility in 11.10, to backup to Ubuntu One.... I upgraded my HDD space in Ubuntu One. It has been going now for 24hours-ish and only backed up what looks like a couple of percent. (By the way what an excellent idea to backup to Ubuntu One, if only we could get it to actually work! :-o) The odd thing is I can sync to drop box within hours, rather than months. This is bad, and has been an issue since Ubuntu One's release. I have reported this problem and there were promises in later releases this would be fixed, but it hasn't. Canonical cannot help either... I posted on several blogs, a lot of people have the same problem but no fixes. So do I use dropbox or another service, until it is sorted, as Ubuntu does not seem to see this as an issue, I think a fix will be a long time in coming. (However,I love the potential of Ubuntu One and the integration with the OS) Yes my internet speeds are fine, etc... :-) No firewall (sudo ufw status: STATUS: INACTIVE), No Proxy, etc NB: I have raised this as a separate question to others posted here, because my question relates to Ubuntu 11.10, though I have commented elsewhere for help. Plus my question also relates to deja-dup backup to Ubuntu One. Thanks

    Read the article

  • how to install Ubuntu on a fresh hard drive

    - by Herman Wiegman
    I attempted to install Ubuntu from a USB stick to my Intel 4 3GHz computer with 80GB HDD. The installer was doing well, then it said something to the effect of "errors on the source USB, or the target HDD" The recommendation was to download the installer again. I suspected my HDD was going bad so I figured I would investigate. What I found was a partially formatted 80GB HDD. I repartitioned it via a different computer. Now a fresh copy of the Ubuntu USB installer is not able to move past the start-up screen (it freezes). I was able to purchase a new / clean HDD, but still the fresh copy of the installer still locks up after the initial opening screen (locks up after about 2 screens worth of installations steps). Does this sounds like a HDD NTHS issue or a CPU/hardware/memory issue? or should I move to a CD image file rather than my USB stick? Now my computer is stuck... no OS.. no way to go back to Windows (upgrade OS CD only). Any insight would be greatly appreciated. Stuck in Schenectady Herman Wiegman

    Read the article

  • I just recursively chmod'd everything under / to 750. Any tips?

    - by Ouairz
    I won't be the first and I won't be the last, I suppose. While playing around with the find command, I made a whoops and it would appear that instead of changing the permissions of the ~/web directory to 750, it changed the permissions of the entire filesystem (/) to 750, however I'm not certain, but any attempt to investigate is thwarted by Permission denied messages. For everything. This was the offending command: sudo find ~/web . type d -exec chmod 750 {} If I'm not mistaken, the Ubuntu team disabled root logins as a safety precaution so I'm out of ideas. I'm (obviously) a total newbie when it comes to file permissions so I was wondering if anyone had some good or even some bad advice to share. I've mentally prepped myself to losing everything on the computer which is only of mild consequence, since I have backups, but I did do a bit of work on this box over the week and it would be a shame to lose it all due to a boneheaded mistake. If you are reading this message, ask yourself, have you backed up any of your work recently? Thanks in advance for any insights. Feel free to scold me for using sudo carelessly

    Read the article

  • Cleaning Up After Chrome

    - by Mark Treadwell
    I find Google Chrome, which I have no interest in, is continually getting installed on machines in my house, mostly due to Adobe Shockwave bringing it along as an install package. (Family members are agreeing to the download, not realizing the Chrome is getting dropped as well.) My major issue after uninstalling Chrome is that you can no longer click on links in Outlook emails. There is a lot on the web about this, and Google has not been proactive at fixing their uninstaller. I have now added a registry file to my Win64 systems to reset the problem registry keys and clear the error. This registry file is pretty simple. It merely resets HKEY_CURRENT_USER\Software\Classes\.htm, HKEY_CURRENT_USER\Software\Classes\.html, and HKEY_CURRENT_USER\Software\Classes\.shtml back to their default values of "htmlfile". Chrome takes over the handling of these file extensions because its default install is to make itself the default web browser. The Chrome uninstalled fails to clear/reset them. In troubleshooting this, I looked in my registry based on the web info on the Chrome uninstall problem. Since my system had never had Chrome installed, my registry did not have the problem keys. To troubleshoot, I installed (ugh!) and uninstalled Chrome. Sure enough, Chrome left the expected debris with a value string of "ChromeHTML.PR2EPLWMBQZK3BY7Z2BFBMFERU" or something similar. Resetting these values fixed the problem. I see that Chrome leaves quite a bit of debris behind in the registry. I guess it is creating the keys then leaving them behind, even though their presence (with bad data) subsequently affects operations.

    Read the article

  • error while trying to play .mp4 file

    - by Husni
    after agree to download and install extra multimedia plugins, it says package dependency can not be resolved, with below error: The following packages have unmet dependencies: gstreamer0.10-plugins-bad:i386: Depends: libc6 (>= 2.15) but 2.15-0ubuntu20 is to be installed Depends: libcairo2 (>= 1.2.4) but 1.12.3+git20120608.f228769d-0ubuntu0ricotz~quantal0 is to be installed Depends: libcdaudio1 (>= 0.99.12p2) but 0.99.12p2-12 is to be installed Depends: libcurl3-gnutls (>= 7.16.2) but 7.27.0-1ubuntu1 is to be installed Depends: libdvdnav4 (>= 4.2.0+20120524) but 4.2.0+20120524-2 is to be installed Depends: libfaad2 (>= 2.7) but 2.7-8 is to be installed Depends: libgcc1 (>= 1:4.1.1) but 1:4.7.2-2ubuntu1 is to be installed Depends: libglib2.0-0 (>= 2.31.8) but 2.34.0-1ubuntu1 is to be installed Depends: libgsm1 (>= 1.0.13) but 1.0.13-4 is to be installed Depends: libgstreamer-plugins-bad0.10-0 (= 0.10.23-7ubuntu1) but 0.10.23-7ubuntu1 is to be installed Depends: libgstreamer-plugins-base0.10-0 (>= 0.10.36) but 0.10.36-1ubuntu1 is to be installed Depends: libgstreamer0.10-0 (>= 0.10.36) but 0.10.36-1ubuntu2 is to be installed Depends: libmpcdec6 (>= 1:0.1~r435) but 2:0.1~r459-1ubuntu1 is to be installed Depends: libopenal1 (>= 1:1.13) but 1:1.14-4ubuntu1 is to be installed Depends: liborc-0.4-0 (>= 1:0.4.16) but 1:0.4.16-2 is to be installed Depends: libpng12-0 (>= 1.2.13-4) but 1.2.49-1ubuntu1 is to be installed Depends: librsvg2-2 (>= 2.14.4) but 2.36.3-0ubuntu1 is to be installed Depends: librtmp0 (>= 2.3) but 2.4+20111222.git4e06e21-1 is to be installed Depends: libschroedinger-1.0-0 (>= 1.0.9) but 1.0.11-2 is to be installed Depends: libsndfile1 (>= 1.0.20) but 1.0.25-5 is to be installed Depends: libssl1.0.0 (>= 1.0.0) but 1.0.1c-3ubuntu2 is to be installed Depends: libstdc++6 (>= 4.1.1) but 4.7.2-2ubuntu1 is to be installed Depends: libvpx1 (>= 1.0.0) but 1.1.0-1 is to be installed Depends: libxvidcore4 (>= 1.2.2) but 2:1.3.2-9 is to be installed

    Read the article

  • Sponsored Giveaway: Free Copies of WinX DVD Copy Pro for All How-To Geek Readers

    - by The Geek
    Have you ever wanted to make a backup of a DVD, or even rip it to an ISO file to use on your computer without the original optical disc? You can use WinX DVD Copy Pro to make this happen, and we’ve got a giveaway for all HTG readers. To get your free copy, just click through the following link to download and get the license code, as long as you download it by December 20th. In addition, an iPhone / iPad Video Software Pack will be presented as the second round gift from December 21st to January 2nd, 2013. For Windows users: http://www.winxdvd.com/giveaway/ WinX DVD Copy Pro has many features, including this list, which we copied straight from their site: Supports latest released DVDs. Protect your DVD disc from damage. Copy DVD to DVD, ISO image, etc. 9 advanced DVD backup schemes. Support Disney’s Fake, scratched DVDs and Sony ARccOS bad sector. Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • Is browser and bot whitelisting a practical approach?

    - by Sn3akyP3t3
    With blacklisting it takes plenty of time to monitor events to uncover undesirable behavior and then taking corrective action. I would like to avoid that daily drudgery if possible. I'm thinking whitelisting would be the answer, but I'm unsure if that is a wise approach due to the nature of deny all, allow only a few. Eventually someone out there will be blocked unintentionally is my fear. Even so, whitelisting would also block plenty of undesired traffic to pay per use items such as the Google Custom Search API as well as preserve bandwidth and my sanity. I'm not running Apache, but the idea would be the same I'm assuming. I would essentially be depending on the User Agent identifier to determine who is allowed to visit. I've tried to take into account for accessibility because some web browsers are more geared for those with disabilities although I'm not aware of any specific ones at the moment. The need to not depend on whitelisting alone to keep the site away from harm is fully understood. Other means to protect the site still need to be in place. I intend to have a honeypot, checkbox CAPTCHA, use of OWASP ESAPI, and blacklisting previous known bad IP addresses.

    Read the article

  • Question regarding Readability vs Processing Time

    - by Jordy
    I am creating a flowchart for a program with multiple sequential steps. Every step should be performed if the previous step is succesful. I use a c-based programming language so the lay-out would be something like this: METHOD 1: if(step_one_succeeded()) { if(step_two_succeeded()) { if(step_three_succeeded()) { //etc. etc. } } } If my program would have 15+ steps, the resulting code would be terribly unfriendly to read. So I changed my design and implemented a global errorcode that I keep passing by reference, make everything more readable. The resulting code would be something like this: METHOD 2: int _no_error = 0; step_one(_no_error); if(_no_error == 0) step_two(_no_error); if(_no_error == 0) step_three(_no_error); if(_no_error == 0) step_two(_no_error); The cyclomatic complexibility stays the same. Now let's say there are N number of steps. And let's assume that checking a condition is 1 clock long and performing a step doesn't take up time. The processing speed of Method1 can be anywhere between 1 and N. The processing speed of Method2 however is always equal to N-1. So Method1 will be faster most of the time. Which brings me to my question, is it bad practice to sacrifice time in order to make the code more readable? And why (not)?

    Read the article

  • SEO strategy for h1, h2, h3 tags for list of items

    - by Theo G
    On a page on my website page I have a list of ALL the products on my site. This list is growing rapidly and I am wondering how to manage it from an SEO point of view. I am shortly adding a title to this section and giving it an H1 tag. Currently the name of each product in this list is not h1,2,3,4 its just styled text. However I was looking to make these h2,3,4. Questions: Is the use of h2,3,4 on these list items bad form as they should be used for content rather than all links? I am thinking of limiting this main list to only 8 items and using h2 tags for each name. Do you this this will have a negative or possible affect over all. I may create a piece of script which counts the first 8 items on the list. These 8 will get the h2, and any after that will get h3 (all styled the same). If I do add h tags should I put just on the name of the product or the outside of the a tag, therefore collecting all info. Has anyone been in a similar situation as this, and if so did they really see any significant difference?

    Read the article

  • How can I find out what site a popup ad came from?

    - by ændrük
    This is the situation: I've been browsing the web for an hour in pursuit of some bit of technical information and have visited several dozen websites that I don't even remember anymore. I've finally found what I need so I start closing the web browser, only to discover that — aaargh! — there's a popup ad hiding underneath! My blood boils. What insidious website is responsible for this circumvention of my browser's popup blocker? I want to make it pay for its crime. I'll write angry emails. Leave bad reviews. Even block it from my Google search results — yes, that'll show it! But I've reached an impediment. The offending site has already been closed. Is it too late to deduce the advertisement's origin? Or can I somehow un-pop the popup? Here's a test page. With only the popup left on your screen, can you deduce that it was caused by visiting PasteHTML?

    Read the article

  • I receive the error 'grub-install /dev/sda failed' while attempting to install Ubuntu as the computer's only OS.

    - by Liath
    I am attempting to install Ubuntu on a box which was previously running Windows 7. I have also experienced the dreaded "Unable to install GRUB" error. I am not attempting to dual boot. I have previously run a Windows boot disk and removed all existing partitions. If I run the Ubuntu 12.04 install CD and click install after the config screens, I get the error Executing 'grub-install /dev/sda' failed. This is a fatal error. (It is the same error as this question: Unable to install GRUB) All the questions I've read while looking for a solution are related to dual boot. I'm not interested in dual boot, I'm after a clean out the box Ubuntu install. How can I achieve this? (For my sanity, please use very simple instructions when responding. I don't claim to have any talent either for linux or as a sysadmin) Additional details copied from comments dated: 2012-05-29 ~15:19Z After booting from the CD, clicking Try Ubuntu, and then sudo fdisk /dev/sda I get fdisk: unable to seek on /dev/sda: Invalid argument sudo fdisk /dev/sdb gives Device contains neither a valid DOS partiion table, nor Sun, SGI or OSF disklabel. Building a new DOS disklabel with disk identifier 0x15228d1d. Changes will remain in memory only until you decide to write them. After that of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite). Command (m for help): I should add the Live CD desktop is graphically bad. I've got missing parts of programs and the terminal occasionally reflects to the bottom of the screen. But I can't imagine this is related.

    Read the article

  • Naming conventions: camelCase versus underscore_case ? what are your thoughts about it?

    - by poelinca
    I've been using underscore_case for about 2 years and I recently switched to camelCase because of the new job (been using the later one for about 2 months and I still think underscore_case is better suited for large projects where there are alot of programmers involved, mainly because the code is easyer to read). Now everybody at work uses camelCase because (so they say) the code looks more elegant . What are you're thoughts about camelCase or underscore_case p.s. please excuse my bad english Edit Some update first: platform used is PHP (but I'm not expecting strict PHP platform related answers , anybody can share their thoughts on which would be the best to use , that's why I came here in the first place) I use camelCase just as everibody else in the team (just as most of you recomend) we use Zend Framework which also recommends camelCase Some examples (related to PHP) : Codeigniter framework recommends underscore_case , and honestly the code is easier to read . ZF recomends camelCase and I'm not the only one who thinks ZF code is a tad harder to follow through. So my question would be rephrased: Let's take a case where you have the platform Foo which doesn't recommend any naming conventions and it's the team leader's choice to pick one. You are that team leader, why would you pick camelCase or why underscore_case? p.s. thanks everybody for the prompt answers so far

    Read the article

  • Can Dungeons & Dragons Make You More Successful? [Video]

    - by Jason Fitzpatrick
    Dungeons & Dragons gets a bit of a bad rap in popular culture, but in this video treatise from Idea Channel, they propose that Dungeons & Dragons wires players for success. There are some deeply ingrained stereotypes about Dungeons & Dragons, and those stereotypes usually begin and end with people shouting “NERD!!!” But the reality of the D&D universe is a whole lot more complex. Rather than being an escape from reality, D&D is actually a way to enhance some important real life skillz! It’s a chance to learn problem solving, visualization, interaction, organization, people management… the list could go on and on. Plus, there are some very famous non-nerds who have declared an affinity for D&D, so best stop criticizing and join in if you want to be a successful at the game of life. While we’re trying not to let our love of all things gaming cloud our judgement, we’re finding it difficult to disagree with the premise that open-ended play fosters creative and adaptive thinking. Can Dungeons & Dragons Make You A Confident & Successful Person? [via Boing Boing] HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

    Read the article

  • Is error suppression acceptable in role of logic mechanism?

    - by Rarst
    This came up in code review at work in context of PHP and @ operator. However I want to try keep this in more generic form, since few question about it I found on SO got bogged down in technical specifics. Accessing array field, which is not set, results in error message and is commonly handled by following logic (pseudo code): if field value is set output field value Code in question was doing it like: start ignoring errors output field value stop ignoring errors The reasoning for latter was that it's more compact and readable code in this specific case. I feel that those benefits do not justify misuse (IMO) of language mechanics. Is such code is being "clever" in a bad way? Is discarding possible error (for any reason) acceptable practice over explicitly handling it (even if that leads to more extensive and/or intensive code)? Is it acceptable for programming operators to cross boundaries of intended use (like in this case using error handling for controlling output)? Edit I wanted to keep it more generic, but specific code being discussed was like this: if ( isset($array['field']) ) { echo '<li>' . $array['field'] . '</li>'; } vs the following example: echo '<li>' . @$array['field'] . '</li>';

    Read the article

  • I'm applying for a position at a startup. To whom should I address my cover letter?

    - by sapphiremirage
    One of the co-founders answered questions about the company when the job was posted, but I feel like I shouldn't assume that he's the one who is in charge of hiring. Since it's relatively new and has a lot of name overlap with other things already on the web, it's hard to find any information about the company online, much less the name of their hiring manager. I'm not even certain that they do have a hiring manager, since I seem to remember that they are just an 8 person team. I've heard that "To whom it may concern" is tacky, and normally I would say something along the lines of "Dear Head of Human Resources", but that clearly doesn't work in this case. Any idea what my salutation should be? Later Edits: Final Version: To Joe Programmer and/or the AwesomeStartup.com hiring team, (+ a few words in first paragraph explaining why I am addressing Joe Programmer) I've already sent the email, so nothing you say here will save me. However, feel free to comment on my decision if you think your words be useful to future generations. Old Version (left here because some people responded to it): To the hiring manager for internships at Awesomestartup.com, Additionally, because so many people made comments about the content of my letter: I did spent several hours writing the cover letter itself and making sure that it was awesome. After spending such a long time working on the important part, I asked this question because I wanted to make sure that it wouldn't get passed over by some human who was having a bad day and decided that my salutation was inappropriate. Not likely when the most likely reader of that email is a programmer type, I know, but I figured that it wouldn't hurt not to be sloppy.

    Read the article

  • Only one user can connect to Ubuntu samba server

    - by StaticMethod
    I setup a samba server on 12.04 LTS, and it works great for one user but not the others. I am trying to map a network drive from a windows 7 laptop. I can successfully authenticate with one user, but the other two both get "Access is denied" errors. Here is my smb.conf file. [global] server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [share] comment = Ubuntu File Server Share path = /srv/share read only = No create mask = 0755 I know that the service is successfully reading from the /etc/passwd file because if I change the Linux password for the user that works, I have to use the new password when I connect. I changed all the users so they are all members of the same groups (all three users are admins anyway). I only ever have one user connected at a time. Here are the permissions on the shared folder /srv$ ls -l drwxrwxrwx 1 nobody nogroup 16 Feb 22 17:05 share Any ideas?

    Read the article

  • Rails: The Law of Demeter [duplicate]

    - by user2158382
    This question already has an answer here: Rails: Law of Demeter Confusion 4 answers I am reading a book called Rails AntiPatterns and they talk about using delegation to to avoid breaking the Law of Demeter. Here is their prime example: They believe that calling something like this in the controller is bad (and I agree) @street = @invoice.customer.address.street Their proposed solution is to do the following: class Customer has_one :address belongs_to :invoice def street address.street end end class Invoice has_one :customer def customer_street customer.street end end @street = @invoice.customer_street They are stating that since you only use one dot, you are not breaking the Law of Demeter here. I think this is incorrect, because you are still going through customer to go through address to get the invoice's street. I primarily got this idea from a blog post I read: http://www.dan-manges.com/blog/37 In the blog post the prime example is class Wallet attr_accessor :cash end class Customer has_one :wallet # attribute delegation def cash @wallet.cash end end class Paperboy def collect_money(customer, due_amount) if customer.cash < due_ammount raise InsufficientFundsError else customer.cash -= due_amount @collected_amount += due_amount end end end The blog post states that although there is only one dot customer.cash instead of customer.wallet.cash, this code still violates the Law of Demeter. Now in the Paperboy collect_money method, we don't have two dots, we just have one in "customer.cash". Has this delegation solved our problem? Not at all. If we look at the behavior, a paperboy is still reaching directly into a customer's wallet to get cash out. EDIT I completely understand and agree that this is still a violation and I need to create a method in Wallet called withdraw that handles the payment for me and that I should call that method inside the Customer class. What I don't get is that according to this process, my first example still violates the Law of Demeter because Invoice is still reaching directly into Customer to get the street. Can somebody help me clear the confusion. I have been searching for the past 2 days trying to let this topic sink in, but it is still confusing.

    Read the article

  • ASP.NET design not SOLID

    - by w0051977
    SOLID principles are described here: http://en.wikipedia.org/wiki/SOLID_%28object-oriented_design%29 I am developing a large ASP.NET app. The previous developer created a few very large classes each with lots of different purposes. It is very difficult to maintain and extend. The classes are deployed to the web server along with the code behind files etc. I want to share a small amount of the app with another application. I am considering moving all of the classes of the ASP.NET web app to a DLL, so the small subset of functionality can be shared. I realise it would be better to only share the classes which contain code to be shared but because of the dependencies this is proving to be very difficult e.g. class A contains code that should be shared, however class A contains references to classes B, C, D, E, F, G etc, so class A cannot be shared on its own. I am planning to refactor the code in the future. As a temporary solution I am planning to convert all the classes into a single class library. Is this a bad idea and if so, is there an alternative? as I don't have time to refactor at the moment.

    Read the article

  • SearchServer2008Express Search Webservice

    - by Mike Koerner
    I was working on calling the Search Server 2008 Express search webservice from Powershell.  I kept getting <ResponsePacket xmlns="urn:Microsoft.Search.Response"><Response domain=""><Status>ERROR_NO_RESPONSE</Status><DebugErrorMessage>The search request was unable to connect to the Search Service.</DebugErrorMessage></Response></ResponsePacket>I checked the user authorization, the webservice search status, even the WSDL.  Turns out the URL for the SearchServer2008 search webservice was incorrect.  I was calling $URI= "http://ss2008/_vti_bin/spsearch.asmx?WSDL"and it should have been$URI= "http://ss2008/_vti_bin/search.asmx?WSDL"Here is my sample powershell script:# WSS Documentation http://msdn.microsoft.com/en-us/library/bb862916.aspx$error.clear()#Bad SearchServer2008Express Search URL $URI= "http://ss2008/_vti_bin/spsearch.asmx?WSDL"#Good SearchServer2008Express Search URL $URI= "http://ss2008/_vti_bin/search.asmx?WSDL"$search = New-WebServiceProxy -uri $URI -namespace WSS -class Search -UseDefaultCredential $queryXml = "<QueryPacket Revision='1000'>  <Query >    <SupportedFormats>      <Format revision='1'>urn:Microsoft.Search.Response.Document.Document</Format>    </SupportedFormats>    <Context>      <QueryText language='en-US' type='MSSQLFT'>SELECT Title, Path, Description, Write, Rank, Size FROM Scope() WHERE CONTAINS('Microsoft')</QueryText>      <!--<QueryText language='en-US' type='TEXT'>Microsoft</QueryText> -->    </Context>  </Query></QueryPacket>" $statusResponse = $search.Status()write-host '$statusResponse:'  $statusResponse $GetPortalSearchInfo = $search.GetPortalSearchInfo()write-host '$GetPortalSearchInfo:'  $GetPortalSearchInfo $queryResult = $search.Query($queryXml)write-host '$queryResult:'  $queryResult

    Read the article

  • How to sync client and server at the first frame

    - by wheelinlight
    I'm making a game where an authoritative server sends information to all clients about states and positions for objects in a 3d world. The player can control his character by clicking on the screen to set a destination for the character, much like in the Diablo series. I've read most information I can find online about interpolation, reconciliation, and general networking architecture (Valve's for instance). I think I understand everything but one thing seems to be missing in every article I read. Let say we have an interpolation delay of 100ms, server tickrate=50ms, latency=200ms; How do I know when 100ms has past on the client? If the server sends the first update on t=0, can I assume it arrives at t=200, therefore assuming that all packets takes the same amount of time to reach the client? What if the first packet arrives a little quick, for instance at t=150. I would then be starting the client with t=150 and at t=250 it will think it has past 100ms since its connect to the server when it in fact only 50ms has past. Hopefully the above paragraph is understandable. The summarized question would be: How do I know at what tick to start simulating the client? EDIT: This is how I ended up doing it: The client keeps a clock (approximately) in sync with the server. The client then simulates the world at simulationTime = syncedTime - avg(RTT)/2 - interpolationTime The round-trip time can fluctuate so therefore I average it out over time. By only keeping the most recent values when calculating the average I hope to adapt to more permanent changes in latency. It's still to early to draw any conclusion. I'm currently simulating bad network connections, but it's looking good so far. Anyone see any possible problems?

    Read the article

  • Picking Core Language For Large Scale Web Platform

    - by ryanzec
    Now I have work with PHP and ASP.NET quite a bit and also played around few other language for web development. I am now at a point where need to start building a backend platform that will have the ability to support a large set of applications and I am trying to figure out which language I want to choose as my core language. When I say core language I mean the language that the majority of the backend code is going to be in. This is not to say that other languages won't be used because my guess is that they will but I want a large majority of the code (90%-98%) to be in 1 language. While I see to benefit of using the language that is best for the job, having 15% in php, 15% in ASP.NET, 5% in perl, 10% in python, 15% in ruby, etc… seems like a very bad idea to me (not to mention integrating everything seamlessly would probably add a bit of overhead). If you were going to be building a large scale web platform that need to support multiple applications from scratch, what would you choose as your core language and why?

    Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >