Search Results

Search found 10406 results on 417 pages for 'device'.

Page 261/417 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

• Setup kickstart boot for all installation media types (cd and usb-flash)

  - by Cucumber

  I created own custom CentOS iso. I used mkisofs make it. This is part of my isolinux.cfg file: label vesa menu label Install ^RAIDIX system kernel vmlinuz append initrd=initrd.img xdriver=vesa nomodeset text linux ks=cdrom:/isolinux/ks.cfg If I specify parameter ks=cdrom:/isolinux/ks.cfg my iso will boot only from cd or dvd-rom. If I specify parameter ks=hd:<device>:/ks.cfg my iso will boot only from usb-drive. Can I specify ks parameter to boot from both type of installation media?

  Read the article

• win7 amd64 guest in kvm does not have sound

  - by davidshen84

  hi, my host system is gentoo amd64, guest system is win 7 amd64. the guest system can work, except it does not have sound. i start kvm with -soundhw ac97, QEMU_AUDIO_DRV='alsa', and after i get into the guest system, i can see a 'Multimedia Audio Controller' in the device manager. but win7 cannot find the driver for it. i searched the network for a long time, and i cannot find a driver for intel ac97 for win7 amd64. i also tried -soundhw sb16, es1370, none of them work. please help me fix this.

  Read the article

• Good HDMI splitter/switch solution

  - by Mehper C. Palavuzlar

  I have a full HD TV which has only 2 HDMI ports on it. Since I have more than 2 devices I connect to TV (e.g. laptop, game console, DVD player), it becomes uncomfortable to plug in and plug out HDMI cables every time I need to use the relevant device. I need a cheap solution to increase the number of my HDMI ports at least to 3. What type of splitter/switch do you recommend? Does the quality of splitter matter, or do they all produce the same audio & video quality?

  Read the article

• Resize underlying partitions in mdadm RAID1

  - by kyork

  I have a home built NAS, and I need to slightly reconfigure some of my drive usage. I have an mdadm RAID1 composed of two 3TB drives. Each drive has one ext3 partition that uses the entire drive. I need to shrink the ext3 partition on both drives, and add a second 8GB or so ext3 partition to one, and swap partition of equal size to the other. I think I have the steps figured out, but wanted some confirmation. Resize the mdadm RAID resize2fs /dev/md0 [size] where size is a little larger than the currently used space on the drive Remove one of the drives from the RAID mdadm /dev/md0 --fail /dev/sda1 Resize the removed drive with parted Add the new partition to the drive with parted Restore the drive to the RAID mdadm -a /dev/md0 /dev/sda1 Repeat 2-5 for the other device Resize the RAID to use the full partition mdadm --grow /dev/md0 -z max Is there anything I've missed, or haven't considered?

  Read the article

• Securing data sent to an unencrypted WiFi AP

  - by David Parunakian

  The business plan of a project I'm involved in assumes selling certain WiFi-enabled devices to end users. All these devices originally have an unencrypted connection and a standard SSID. The problem is that although the user can connect to it and set both a new SSID and a WPA passphrase, these are being sent to the AP in plain text and thus can be intercepted by anyone nearby with a sniffer. What's the best solution to this problem, and why? Initially set up an encrypted wireless network at the device and supply the user with a printed passphrase Buy an SSL certificate for the AP's default IP address or local domain name (the APs aren't supposed to work as a router and have a captive portal & dnsmasq installed, so all of them can pretend to be myunit.example.com, as far as I understand) Something different Thank you.

  Read the article

• how do I tether my computer and blackberry?

  - by el chief

  I have Windows 7 Home Premium Blackberry Curve 9300 6.0 bundle 1478 (v6.0.0.380, platform 6.6.0.86) desktop software 6.0.0.380 I was able to connect with desktop software version 5 but 6 does not work. I am able to connect to the internet just fine with the device itself (ie can browse the web). How can I debug this? update: here's the error message: when i try to connect i get the message "failed to start mobile internet. the specified port is not open. please check your profile settings and make sure your radio is turned on. this service might also have been turned off by your wireless service provider or your administrator"

  Read the article

• How to boot between OSes from inside each OS? in a Windows/Ubuntu dual boot system

  - by TheCompander

  My ideal scenario is that there is a script/command to boot into the alternate OS from the current OS you are in, restarting the same OS without running the script/command will return it to the same OS. Currently I have grub setup to remember the last OS booted, using GRUB_DEFAULT=saved and GRUB_SAVEDEFAULT=true, I'd like to keep this option. I have read about the ability to manipulate grub from within Ubuntu to boot into windows, shown in this link. Is there a way to similarly boot into Ubuntu from within Windows? I am primarily connecting to this device remotely and hence my query.

  Read the article

• Second partition with Windows 7 unmountable

  - by Florian Pilz

  I'm using GRUB2 to dualboot Ubuntu and Windows 7. I installed Windows 7 some days ago and rewrote GRUB2 to cope with the dualboot. Everything went fine till yesterday - I could boot into both OS. Since this morning my laptop restarts every time I choose Windows 7 from the menu. Ubuntu is still working. As I tried to mount the partition with Windows 7 on Ubuntu it gave me return code 2, so this isn't working as well. I tried to reinstall GRUB2 to the MBR but it didn't help. I also tried to repair Windows 7 boot with it's install DVD, while trying so it showed me the following error: "Status: 0xc000000f Info: Boot selection failed because a required device is inaccessible." Tanks in advance

  Read the article

• Do Seagate Momentus XT SSD Hybrid drives perform better than a good hard drive + flash on ReadyBoost

  - by Chris W. Rea

  Seagate has released a product called the Momentus XT Solid State Hybrid Drive. At a glance, this looks exactly like what Windows ReadyBoost attempts to do with software at the OS level: Pairing the benefits of a large hard drive together with the performance of solid-state flash memory. Does the Momentus XT out-perform a similar ad-hoc pairing of a decent hard drive with similar flash memory storage under Windows ReadyBoost? Other than the obvious "a hardware implementation ought to be faster than a software implementation", why would ReadyBoost not be able to perform as well as such a hybrid device?

  Read the article

• How do I restore a non-system hard drive using Time Machine under OSX?

  - by richardtallent

  I dropped one of the external drives on my Mac Pro and it started making noises... so I bought a replacement drive. No biggie, that's why I have Time Machine, right? So now that I have the new drive up and initialized, how do I actually restore the drive from backup? Time Machine is intuitive when it comes to restoring the system drive or restoring individual folders/files on the same literal device, but I'm a bit stuck in how to properly restore an entire drive that is not the boot drive. I saw one suggestion to use the same volume name as the old drive and then go into Time Machine. Haven't tried that since the information is unconfirmed. For now, I just went to the Time Machine volume, found the latest backup folder for that volume, and I'm copying the files via Finder. Of couse, I expect this to work just fine, but I feel like I'm missing something if that's the "proper" way to do this.

  Read the article

• Forcing logon to Air Watch server upon joining wifi

  - by DKNUCKLES

  I'm setting up a wireless controller that I would like to leave as unsecured. When a user connects to this network they need to be forwarded to a specific page where they can authenticate with the Air Watch system they have in place. Once authentication takes place, a profile will be downloaded to their device and we can administer the devices accordingly. I'm mulling over how I can force the page to the user when they log in. The methodology I'm thinking about working with is creating a NAT rule for that VSC that would forward all port 80 and 443 traffic to the airwatch server. Once they authenticate, a profile will be downloaded which will connect the devices to an Virtual Access Point who's SSID isn't broadcasted. Is this methodology correct or can someone think of an easier / more efficient way of accomplishing this? The controller is an HP MSM720 for what it's worth.

  Read the article

• How do I recover from a Linux CentOS 4.6 Operating System Crash

  - by Greg Omebije

  Our x86 Linux server running CentOS4.6 has crashed. The machine boots only to the Grub prompt. We have tried using the "rescue mode" to recover the System, but it hasn't worked. How can we fix this problem, so that the machine boots normally? How can we fix this problem to the point were we can recover our files from the server Our Linux Server Configuration: Dell PowerEdge 1950 Intel Xeon 2 HDD (146GB each) 4GB RAM Hardware and Software raid setup CentOS 4.6 We used Sysrecord to boot the computer: the following are the output of fdisk -l Disk /dev/sda: 293.3 GB, 292326211584 255 heads, 63 sectors/track, 35539 Cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 17769 142625070 8e Linux LVM

  Read the article

• What ssh command would I use to set up "backwards listening"

  - by Nathan

  Machine A is behind a firewall. I have physical access to it, but I want to log into it remotely, and I do not have access to the firewall settings. Machine B is remote, and not behind any firewall. (It's my linode) Machine C is the mobile device I'm going to attempt to ssh into A from. Is there an ssh command that I can run from machine A that connects to machine B and stays open, that will allow me to log into A from C, via B? From the manual I'd guess it would be to run the follwing on A ssh -R *:9999:localhost:22 me@B and then run this on C ssh me@B -p 9999 but the previous command reports "Connection refused."

  Read the article

• No sound on Debian unstable Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller

  - by Dave Roger

  I have no sound on my Debian unstable. # cat /etc/issue Debian GNU/Linux squeeze/sid # lspci |grep -i audio 00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02) # lsmod | grep -i snd snd_hda_codec_realtek 235506 1 snd_hda_intel 19907 0 snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5380 1 snd_hda_codec snd_pcm_oss 32591 0 snd_mixer_oss 12606 1 snd_pcm_oss snd_pcm 60471 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 4400 0 snd_rawmidi 15515 1 snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event snd_timer 15582 2 snd_pcm,snd_seq snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq snd 46446 11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 4598 1 snd snd_page_alloc 6249 2 snd_hda_intel,snd_pcm # cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.21. # uname -r 2.6.32-5-amd64

  Read the article

• Should I remove all unmanged switches from my network?

  - by IMAbev

  I have a office network with approx 150 devices (computers/printers/ip phones). Almost all of the end point devices have straight run Cat5e from my Hp switches directly to the device. IP phones for each end user sit between the hp switch and computer. (hp switch - in to phone out of phone in to computer) While I have gotten rid of most of them, I still have a couple linksys unmanaged switches that split off to 2 or more devices. I have heard various reasons for removing these switches but not entirely sure if it actually degrades the network. I agree that eliminating these switches certainly cleans up the network from a management standpoint. Are these unmanaged switches bad for my network? Is there a clear advantage to having 'home run' cable runs to each of my end point devices?

  Read the article

• CentOS - massive usage on loopback interface

  - by Matthew Iselin

  Hi, I have a CentOS installation which is running fairly smoothly. Today I ran ifconfig mainly to see what sort of usage has been coming across the ethernet interface, and to also check my link speed. This is what I ended up seeing for the loopback device: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10301085132061223274 errors:0 dropped:0 overruns:0 frame:0 TX packets:13981054163812689233 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11783901785008000095 (0.6 EiB) TX bytes:10333501021200548281 (0.9 EiB) This just feels completely wrong - almost an EiB of data? Any assistance in tracking down the source of these statistics would be greatly appreciated.

  Read the article

• Cisco Secure ACS 4.2 + TACACS+ - installed together or?

  - by Lance

  I'm tasked with installing Cisco Secure ACS (4.2 as its windows based). Do you install TACACS.net or something similar with ACS or does ACS facilitate the TACACS+ authentication? I can get my device to authenticate against a tacacs.net installation without much trouble but can't seem to figure out how one plugs ACS in, per se. I've installed ACS on the same server (is this my problem?) but no matter what I do I can only get my TACACS+ users to authenticate. Any helps/tips would be greatly appreciated!

  Read the article

• NetBSD as VMware workstation guest: `startx` hangs and maxes all CPUs utilization

  - by Howard Guo

  I am using VMware workstation 8. I have attempted to install and run NetBSD 5.1.2 and 6.0. Installations all went OK and the system was usable until I install a window manager. After installed xfce4, in NetBSD 5.1.2, I could startx and used xfce4 two times, however consecutive startx will hang and max all CPU to 100%. In NetBSD 6.0 RC2, I could not even start xfce4 once, startx hangs and max all CPU to 100%. I have tried to use both vmwlegacy and vmware device drivers, they don't help. I have also tried both 32bit and 64bit NetBSD, they behave in the same way. I also tried to catch the output of startx, however system was already hanging before the output gets flushed. Apparently no one else has encountered these troubles on Google search, did I miss any configuration piece? Any other suggestions please?

  Read the article

• Problem Assigning Static IP to CentOS Server

  - by nategood

  We have a sandbox server running CentOS that we run inside our office. Our ISP has assigned us a block of 5 static IPs. We now want to assign it a static IP. DEVICE=eth0 BOOTPROTO=none # have also tried "static" here HWADDR=00:13:72:*:*:* ONBOOT=yes TYPE=Ethernet NETMASK=255.255.255.0 IPADDR=173.*.*.161 GATEWAY=10.1.10.1 /etc/resolv.cnf is also set with the appropriate name servers from our ISP. When I ifdown eth0 then ifup eth0 I get... SIOCADDRT: Network is unreachable When I switch to DCHP, the machine has an IP assigned and there are no connection problems. Any ideas?

  Read the article

• Huawei b260a gsm modem not forwarding gre for pptp tunnel

  - by Priit

  I have a huawei gsm modem that does not want to let gre through. The goal is to connect into a pptp server thats behind the huawei. In the modems port forwarding settings theres a ready made profile for pptp (1723). After activating that the MS pptp test tools show that connection is being initiated but no gre packets make it to the server. After taking a closer look into the modems iptables rules theres nothing in there about gre. So I tried making gre rules manualy into forward and preroute chains without any success what so ever. As far as I can tell theres no ip_gre module present on the device is that needed for gre forwarding? Thats what I'm afraid of that it doesn't support gre in NAT but how would I turn it into a bridge? The wan interface is ppp0 so bridging it with eth0 would not work right? Is there some iptables rule I could use to make the modem let all the traffic just straight through?

  Read the article

• multi boot: xp + xp + xubuntu, how to?

  - by Jassano

  My laptop (with a single harddrive) currently has xp + xubuntu dual boot. I want to make that triple boot: xp + xp + xubuntu Please don't ask why, take it as given. How can I accomplish this triple boot? I tried using gparted to add a partition (worked!), used dd to clone the xp install to the new partition (worked!), edited grub (my bootloader) to list a third entry pointing to the correct device (worked!). But regardless of which of the two xp entries in grub I select I still get booted into one and the same XP. The files for the other XP show up under D: so I know they're there alright. I have edited the boot.ini on the new partition so everything looks to be in order. What do I need to do to change that and make both xp instances bootable in this scenario?

  Read the article

• Boot from VHD with windows7 - bcdedit trouble

  - by Michiel Overeem

  I'm running Windows7 Enterprise, x64 version. I've created a windows7 vhd file with help of the following blog post hanselman blog After that, I've added it to my boot menu with help of another blog post hanselman blog This worked great. After that, i've upgraded my hdd. With help of clonezilla i've copied the old disk to the new disk. Next step was to copy the vhd to another partition. Then i updated the boot menu. However, the step C:\>bcdedit /set {guid} device vhd=[driveletter:]\<directory>\<vhd filename> fails with the message An error has occurred setting the element data. The request is not supported. what is happening?

  Read the article

• Can't connect to wireless router anymore due to data rate problem

  - by Jay White

  I was playing around with my wireless router, and switched the mode to a fixed mode B. Now< I can no longer assoicate to the AP. Windows does not give any particular error message, but with wireshark I see that the returned error is that the client does not support the necessary data rate. My wireless card is type n, and it is set to mode a/b/g compatible. I tried setting ot to just b, however this made no difference. How can I set the data rate of my card so that I can connect again to my AP? I would prefer not to just reset the device, as there has been some configuration done that would be a pain to redo, and as well I do not have the ISP password handy. Regardless I would like to understand this situation better.

  Read the article

• Cannot resize OS X partition

  - by joshhunt

  I am trying to resize my existing Mac OS Extended partition on my Macbook to install Windows 7 (using steps similar to these), but when ever I go to apply the changes, I get this error: Partition failed Partition failed with the error: The partition cannot be resized. Try reducing the amount of change in the size of the partition. The total capacity of the hard drive in question is 260GB, with the entirety being taken up by the OS X boot partition. There is I am aiming to shrink that partition down to 60GB. How can I fix this problem? I have been reducing the amount of change by 10GB each attempt, but it still is not working. I assume the problem is that there is not a large amount of continuous space on the device. Is there some way to can do a manual defrag that would rectify this problem?

  Read the article

• Mac OS X - rmdir fails with "Operation not permitted" for a folder created by a PC on a removable dr

  - by maxint

  Hello. I have a problem (using Mac OS X 10.5.8) with the access rights of a folder that was presumably created by a virus on a disk-on-key drive when I used it with a PC. I can't remove the folder or change it's name. In Finder's Info window the Lock box is unchecked and uncheckable - if I try to check it it flips back to off. Please see the details: MaxBookAir:GARMIN'S maxint$ rmdir winamp_cache_0001/ rmdir: winamp_cache_0001/: Operation not permitted MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ mv winamp_cache_0001 test mv: rename winamp_cache_0001 to test: Operation not permitted MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ GetFileInfo winamp_cache_0001 directory: "/Volumes/GARMIN'S/winamp_cache_0001" attributes: avbstclinmedz created: 12/23/2009 14:34:52 modified: 02/13/2010 22:52:36 MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ stat -x winamp_cache_0001 File: "winamp_cache_0001" Size: 32768 FileType: Directory Mode: (0777/drwxrwxrwx) Uid: ( 502/ maxint) Gid: ( 20/ staff) Device: 14,5 Inode: 7439 Links: 1 Access: Wed Dec 23 00:00:00 2009 Modify: Sat Feb 13 22:52:36 2010 Change: Sat Feb 13 22:52:36 2010 MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ stat -r winamp_cache_0001 234881029 7439 040777 1 502 20 0 32768 1261506600 1266081756 1266081756 1261559092 131072 64 32768 winamp_cache_0001 MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ ls -lTd winamp_cache_0001/ drwxrwxrwx 1 maxint staff 32768 Feb 13 22:52:36 2010 winamp_cache_0001/ MaxBookAir:GARMIN'S maxint$

  Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >