Search Results

Search found 8902 results on 357 pages for 'hardware virtualization'.

Page 261/357 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

• How to change the setting for a network device reported by ethtool, specifically Speed, on VM?

  - by Ramadheer Singh

  This is related to these two questions, although they don't answer my question. The machines are RHEL6. 1.ethtool not showing all the properties 2.changing network speed to 1000Mb/s Output on VM: [root@foo ~]# ethtool eth0 Settings for eth0: Current message level: 0x00000007 (7) Link detected: yes Output on Real Hardware: (interested in Speed) # ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes ***Speed: 1000Mb/s*** Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: d Wake-on: d Link detected: yes if there's anyway I can set this in VM, please suggest.

  Read the article

• Audio Line-In on Ubuntu/Linux Mint

  - by hahuang65

  I'm currently on Windows, and want to switch to Linux, but some hardware issues are preventing me. Mainly, I have a sound card that supports Line-In. On Windows, anything I plug into the line-in gets outputted to the speakers. However, when I installed Linux, because there is not a control application that comes with the driver, I have no idea how to set this up. I tried going to the sound settings and it doesn't seem to be there. I also want to configure it for 2.1 sound, and do not know how to do that... Anyone here done it before? Thanks in advance for the help!

  Read the article

• Windows freezes, showing a random color or pattern

  - by Manu

  I have a PC with windows 7, and I'm experiencing random freezes with increasing frequency. After some time (from 30 minutes to a few hours) the screen will shows a random color or pattern (vertical lines) and nothing works anymore, I need to reboot manually. I've checked the events log, but nothing is shown except for the unexpected reboot. I've tested the RAM with Memtest86+ 4.20, and the graphics card with FurMark 1.10.3, no errors have been found. I've updated the graphic drivers and openned the case to remove dust, but the issue is still there. Also, the problem doesn't seem to arise when I'm playing games fullscreen, but when I'm surfing the web, using itunes, or coding. My hardware is as follows : intel core i5 750 CPU, ATI Radeon HD 5670 graphics card, ASUSTeK P7P55D motherboard, two 2Gb KINGSTON DDR3 ram sticks, 2 SATA hard drives, a Netgear dongle for wifi.

  Read the article

• Hylafax with serial over IP modem

  - by zero_r

  I'm looking into virtualizing a Hylafax server which currently runs on a dedicated hardware running CentOS with a Divalogic card. The main issue obviously is, how to connect the modem to the VM. There are serial over IP devices available at digi.com. Maybe there are others? Regarding digi.com devices, as far as I understood one can install the RealPort software and then have a /dev/ttySx device presented to the Linux server. This device then can be used as serial connection to the modem. Does someone have such a configuration in place? Or does someone have another idea to virtualize a Hylafax server (outbound faxes only). Thank you in advance

  Read the article

• Cannot Login as root

  - by Josh Moore

  At my work we ship our product on pre-installed servers as a software/hardware package. We are using open SUSE 10.3 for the OS and we setup and we always log in with the root user to do maintenance on the box. Recently we just had box returned to us that the customer said the could not longer connect to the box through the network interface. So when I started to work on the box I run into the this problem: At the command prompt to login i type the user name "root" and hit enter. Then even before it asks me for a password I get "Login incorrect". I have never seen this behavior before and could not find any information about it online. Does anybody know what is going on? Thanks.

  Read the article

• Can DVI look different?

  - by queueoverflow

  I have a desktop with an nVidia GT 9500 which has two DVI slots. I have a 24" TN-Panel TFT on that and it looks pretty good. Then I hooked it onto the DisplayPort of my ThinkPad with the Intel HD 3000 card with an DP-DVI adapter and I think that the fonts look even clearer. Both computers run Kubuntu 12.04, although the ThinkPad is freshly set up, while the desktop is migrated from the previous release. Is this a hardware thing or is it just some setting in the anti-aliasing or sub-pixel-hinting?

  Read the article

• Does Windows 8 Need New, Specialized Drivers?

  - by Synetech

  It seems like an obvious question, but I’m having a difficult time finding out if Windows 8, with all its changes, will require new, specialized drivers. I see that a lot of manufacturers have started releasing Windows 8-specific drivers for their hardware, but what about those that are not, will Windows XP or 7 drivers work or have they changed the driver/system/security architecture again, thus requiring new drivers? The closest thing I could find to an answer was a thread in which it was mentioned that the display driver model was again updated, thus requiring new display drivers, but not much else (e.g., audio cards, printers, chipsets, etc.)

  Read the article

• Windows 8 switch user is very slow

  - by Chris Weber

  I recently upgraded to Windows 8 from Windows 7. One major annoyance is how slow the "switch user" command is. In Windows 7 switching users was fairly fast. I've got an SSD drive with pretty good hardware, so I'm suspecting it's something with Windows 8, either a defect, or the fact that I upgraded from Windows 7 instead of doing a clean install. Anybody have this problem? My wife is complaining enough about Windows 8 and this is one of the biggest complaints.

  Read the article

• good books about server architecture?

  - by ajsie

  when the traffic for a website grows i dont think one apache server in a vps is the way to go. i would like to know more about how i then should set up the server side architecture. im not that much into hardware stuff (what kind of cables to use, different cpu architectures etc), but interested in the software architecture: what servers (apache, nginx, squid, varnish etc) to use and how they interact with each other one server in one machine? how many mysql servers. how many apache, nginx servers and so on. how the "machine court" looks like. are there any good books about this area?

  Read the article

• Very frequent "Server not found" messages

  - by Village

  Recently, while browsing and clicking or typing an address, I get: "Server not found", "Connection was reset", or a half-loaded page. Usually the page loads instantly after clicking reload, but this means I must reload on every page. Images on one site, but stored at a different server don't load until reloading for a second time. Clicking "submit" on many sites frequently doesn't work unless I reload many times. Sometimes sites load, but without colors and formating, appearing as if they would in Lynx. This seems to happen with every Web site. My Internet service claims everything on their end is fine. This happened a day after running an update in aptitude. I have not updated any hardware. I have tried clearing Iceweasel's cache. I do not have any router or other equipment. What could be going on? How can I troubleshoot this? PPPoE connection, Iceweasel 3.5.16, Debian 6

  Read the article

• Is there a software like AutoCAD, but only 2D, not 3D?

  - by Saeed Neamati

  I love AutuCAD. It's powerful, easy to use, and fits engineering mind. It rocks when you want to draw 2D diagrams and shapes and one the cool features I like about it, is its snapping power. You draw a simple rectangle, then you can very easily create a circumscribe circle around it. However, new version of it are becoming really heavy (in size) and need high tech hardware, because of its powerful 3D capabilities, and rendering engines coming with it. I only want the 2D part of AutoCAD. Is there any software out there, which resembles AutoCAD (like having a console, where you can type L and get the line tool, or having snapping capability, etc.), but is small in size? In other words, what software can be named as AutoCAD 2D alternative?

  Read the article

• Does the size of the monitor Matter?

  - by Arsheep

  I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

  Read the article

• Does the size of the monitor Matter?

  - by Arsheep

  I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

  Read the article

• Disk controller speed responsible for slow write speeds?

  - by vizvayu

  I have question. I'm using ESXi 4.0U1 in an IBM x3200M2 with an integrated LSI 1064e RAID controller, without any kind of cache. I have 3 250GB HOT-SWAP SATA HDs configured in RAID1E (IME). ESXi works fine, read speed are quite OK, but write speeds are incredible slow, never more than 8MB/s, and this is the best case scenario, benchmarking with iozone streaming writes, using a VMWare Paravirtual controller and with only this VM active, no swapping of any kind (total vm memory reserved). Already wrote to IBM but I don't have any kind of pay support so they didn't even answered, so I'm just wondering... anybody has any experience with a similar setup? I just want to be sure this is hardware related and can't be fixed with some kind of config option, because I'm thinking on buying a new RAID controller (Adaptec 2405 looks nice). Thanks again!

  Read the article

• Do HTTP reverse proxies typically enable HTTP Keep-Alive on the client side of the proxied connection and not on the server side?

  - by LostInComputer

  HAProxy has the ability to enable HTTP keep-alive on the client side (client <- HAProxy) but disable it on the server side (HAProxy <- server). Some of our clients connect to our web service via satellite so the latency is ~600ms and I think that by enabling keep-alive, it will speed things up a bit. Am I right? Is this supported by Nginx? Is this a widely implemented feature in other software and hardware load balancers? What else besides HAProxy?

  Read the article

• What's a good box to serve files on my local network, cross platform?

  - by rogpeppe

  I've installed CAT5e cable and gigabit switches in my house with the goal of having an "always-on" file server in the loft, accessible to both my macbook and my partner's Windows box. I'd like to find a solution which: uses minimal power. allows me to access as much disk bandwidth as possible. provides glitch-free file access to both MacOS and Windows. is as cheap as possible, while remaining reliable. Optional, but desirable extras: software or hardware RAID; open source solutions. A SheevaPlug with eSATA seems one possibility, but I'm sure there are any number of other good options.

  Read the article

• Sharing files between multiple computers?

  - by Koalatea

  At my school, we have 13 iMacs that we use to make our yearbook. Currently our school has some servers for us, but since we work with so many files ( thousands of pictures, most of which are ~3MB ) it slows down far too much. Is there a way to better share files between our computers? We are on a wireless network and the whole school shares the same servers, we have around probably 400 computers in the school. Is there a hardware fix I can do? Something like buying an external and hooking only yearbook computers to it?

  Read the article

• Software RAID underneath ESXi datastore

  - by carlpett

  I'm building an virtual environment for a small business. It is based around a single ESXi 5.1 host, which will host half a dozen or so VMs. I'm having some doubts regarding how to implement the storage though. I naturally want the datastore to be fault tolerant, but I can't get the funds for a separate storage machine, nor expensive hardware RAID solutions, so I would like to use some software RAID (lvm/mdadm, most likely). How can this be implemented? My only idea so far would be to create a VM which has the storage adapter as passthrough, puts some software RAID on top of the disks and then presents the resulting volumes "back" to the ESXi host which then creates a datastore from which other VMs get their storage presented. This does seem kind of round-about, do I have any better options? From my research, passthrough seems to come with quite a few drawbacks, such as no suspend/resume etc.

  Read the article

• Why aren't there 8gb RAM modules yet?

  - by user49951

  Why is RAM module development seemingly stuck at the same size for a while now (a couple of years)? I bought 2x2gb modules 2 years ago, and now it's all the same size, with prices even bigger. I want more memory, because I work a lot on my computer and I just need it. What is going on? Hardware/memory progress was being made constantly until these couple of years, and I'm a big computer user for over 15 years. Why isn't here 4gb/8gb modules yet? I would gladly replace my DDR2 motherboard for a DDRX one if it had at least 4gb DDRX modules for a reasonable price. Now we have a situation with very cheap usb drives reaching 64gb size, and a ram modules with pathetic 2gb size. Sounds like some sort of conspiracy.

  Read the article

• Keeping the wireless connected.

  - by casr

  I’m running OpenBSD on a computer which is connected via wireless to the network. It is a well supported NIC and I’ve had no problems with it from a hardware perspective. Unfortunately my wireless access point occasionally loves to forget it’s settings. I then have to help it remember. However, in this intervening time my OpenBSD box drops the connection and then does not automatically reconnect. I have alleviated my problems by running this simple script in the background: #!/bin/sh while [ 1 ] do ping -c1 192.168.1.254 > /dev/null if [ $? = 1 ] then sh /etc/netstart ral0 > /dev/null fi sleep 30 done [Ping the access point. If there is no response attempt to reconnect.] It seems to me to be a very suboptimal solution. Has anyone else come across a better way?

  Read the article

• Best Linux Distro for web services (Nginx & node.js) on laptop: Compaq 6710b?

  - by tomByrer

  I haven't used Linux in 5+ years, aside from d/l occasional system recovery CDs off DistroWatch, so I don't know the current landscape. Related postings on this forum are several years old & may not relate to my hardware (Compaq 6710b laptop, Core2Duo Centrino). Requirements: Use the Compaq 6710b laptop's WiFi out of the box enough frequently updated pre-made packages for web hosting & development (Nginx & node.js are biggest concerns, everyone has Apache & PHP, & I'm not crazy about building from source) prefer be easy enough to use, but outside help available (so a small user-base distro is only OK if the community is active & a major disto's packages are compatable) configuration easy to transfer to outside web hosts. You have actually installed/used recommended disto (don't have to be expert) TIA!

  Read the article

• How can I upgrade from Windows 8 x32 to x64 fastest & easiest?

  - by parkviewK

  I was upgrading the hardware in a family member's computer and purchased the Windows 8 upgrade for $40 from their website. Not thinking, after I installed it I realized I now have 32bit Windows on this 64bit capable machine. Did some research and it appears that the upgrade assistant just gives you whatever architecture you were uprgading from (windows 7 32bit). Question is, what is my best option here? I have already purchased a key, will this work on x64? I'm considering installing Windows 8 Preview x64 and upgrading from there, but not sure if that will work or if it will make me purchase it again.

  Read the article

• Can't decide on a new distro

  - by Alex W

  I've had Ubuntu (9.10) on my netbook in the past and I really liked it. I'm currently running Fedora and feeling like I should "change it up" again. I've played around with Ubuntu 10.04 Lucid a little, and so far I'm very impressed. I've always wanted to try Arch, but I'm worried I won't have the driver support I need for all the non-standard hardware in a netbook. Does anybody have a suggestion for a new distro to try? I'm preferably looking for something feature-rich over light-weight, and something that I can have up and running with a minimum of configuration (at least partially working). Thanks!

  Read the article

• Web Server Setup

  - by gustyaquino

  Hello, In my workplace, we want to implement your own web server for at leat 100 Apache/PHP/MySQL web pages. My boss is opposed to hiring skilled personnel, he think we can do ourselves. Currently, we are working with hostgator reseller account. I chose CentOS as the operating system, but I don't know the best hardware solution. HP, Dell ? What about the setup on these platforms? Thanks. PS: sorry for my bad english Edit: The purpose of this migration isn't related to performance issues. But independence.

  Read the article

• Can I run Ubuntu directly under Windows 8?

  - by huahsin68

  Text below is extract from the article, Windows 8 Tip: Virtualize with Hyper-V. Better still, Windows Virtual PC offered a feature called XP Mode, free for users of Windows 7 Professional, Enterprise, and Ultimate, which included a full working copy of Windows XP with Service Pack 3. But the big deal here is that as you installed applications in the virtual copy of XP, they would be made available through Windows 7’s Start Menu. And you could run these applications, side-by-side, with Windows 7 applications on the Windows 7 desktop. It was a seamless, integrated experience, ideal for those one-off application compatibility issues. I was thinking to install VirtualBox in Windows 8 and then run Ubuntu as guess OS. Since Hyper-V is a Type-0 hipervisor, may I know does this bring the same benefit if I have Ubuntu Linux install as a virtual guess OS? Meaning, if I turning the Ubuntu on (the guess OS), does the Ubuntu still able to access the hardware information like nVidia display card or processor information? I'm just curious to know can this be done?

  Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >