Search Results

Search found 7618 results on 305 pages for 'backup exec'.

Page 263/305 | < Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >

• Can't mount hard drive. Ubuntu 12.04

  - by Sam

  I am trying to recover some pictures on my 320 GB Hard Disk, so I put in a Live Ubuntu CD and am in that right now. In the devices list, it shows my USB drive, but not my 320 GB Hard Disk. I can see the disk in Disk Utility (it says it's on /dev/sda), but it's not mounted, and it says it has a few bad sectors but it is OK. In Disk Usage Analyzer, it says my maximum capacity is 13.4 GB, so it's definitely not using the 320 GB Hard Disk. I tried the following: sudo mkdir /media/newhd (worked) sudo mount /dev/sda /media/newhd (didn't work. it says I must specify the filesystem type) I then tried: fsck.ext4 -f /dev/sda (didn't work. Said: Superblock invalid, trying to backup blocks. then: Bad magic number in super-block while trying to open /dev/sda. The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock) Does anyone have any ideas? The whole problem started when my Windows Vista said "Can't find operating system". Any ideas on how I can get on to my hard drive at /dev/sda?

  Read the article

• Western Digital HDD now freezes my BIOS when loading the video card!

  - by Vercas

  After I have successively and successfully installed 3 Windows XP's on the same partition (Don't ask why...), I restarted my computer again and the BIOS just froze when it loaded the video card. Together with my uncle, we tracked down the problem and found out it's the HDD's fault. We tried booting without the HDD and it worked! (No other HDD (I have only one) but with a Ubuntu Live CD in.) We tried the HDD with a different data bus (It was from an identical computer) but that one didn't let my BIOS recognize the HDD. We also put the HDD in another computer as the second HDD and it DID recognize it but Windows XP kept saying it cannot install a driver and that it installed successfully. Happily, I have managed to backup some of my most important files in that other computer. The following is a list of tests that we have run. With the HDD Original data bus Original computer Result: BIOS freezes WITHOUT the HDD Original data bus Original computer Result: Everything works just fine! With the HDD ANOTHER data bus Original computer Result: Cannot see the HDD With the HDD Original data bus ANOTHER computer Result: It worked! With the HDD ANOTHER data bus ANOTHER computer Result: It worked! During the tests, we had only two data buses and two computers. (each data bus from it's own computer) Strange thing is that the second data bus cannot let the BIOS see the HDD in my computer but works just fine with the other computer. I beg you to help me! I have my most important data on that HDD and I really cannot afford to buy another decent IDE HDD now!

  Read the article

• SBS2011 Standard DNS suddenly not resolving some domains

  - by Matt

  Suddenly today I am unable to resolve common domains like serverfault.com, facebook.com; but other domains like google.com, cnn.com work fine. This is on a client machine (Win7 Pro) connected to an SBS2011 Standard domain. The only DNS server is the SBS2011 server. The same domains work fine on all client PCs I have tried, and the same ones do not work. Using nslookup, I get 'no such domain' errors for facebook.com, and the correct DNS entries for the ones that do work. When I add Google's Public DNS to my client PC as a backup (primary = local SBS server, secondary = 8.8.8.8), everything works fine for my client PC, but querying from the SBS server directly or from other client PCs are broken (so I don't believe it's a firewall issue). My main question is how can I see what servers the SBS2011 server queries if it doesn't know about a domain? There is nothing in our firewall logs that say it blocked any DNS-based packets, but I also wanted to query based on the IP/FQDN on the servers that the SBS server was likely to contact to find out about facebook.com for example. Update 23/05/2012: It appears DNS is working again this morning for the affected websites. Both the DC on its own and all client PCs can once again access the websites that were not loading last night, as well as the websites that were working. I haven't changed anything overnight, so it appears that there was some kind of temporary glitch, but I can't understand what would have caused it on the network.

  Read the article

• What games work well on MacBook Pro (i7/GeForce GT 330M) within VMWare Fusion?

  - by webworm

  I have a 15" MacBook Pro (2.66 i7 with 8 GB RAM) with the GeForce GT 330M 512 MB graphics card. I use it primarily for development (Mac/Web/Windows) though I would like to play the occasional game with my son who uses a desktop PC system at home. I prefer to use VMWare Fusion for virtualization rather than BootCamp for a number of reasons. Heat/Fan issues with i7 under BootCamp Prefer to retain virtual machine as single file rather than dedicated partition (easier to move a nd backup) I have heard that Windows support of the GeForce GT 330 in BootCamp is not all that good. So that being said I was wondering what sort of games I would be able to play within the Fusion environment running Windows 7. I have 8 GB RAM and usually dedicate 4 GB to the virtual machine. I don't expect to be able to play the latest FPS games such as BattleField: Bad Company 2 or Call of Duty, rather I am looking at games such a Total War II, Civilizations IV, Supreme Commander, and other RTS type games. I should mention the native screen resolution of my MacBook Pro is 1680x1050, which is what I would be most likely running the VM at (fullscreen). Thank you for any advice.

  Read the article

• Azure Virtual Machines - what fault tolerance do they provide?

  - by Borek

  We are thinking about moving our virtual machines (Hyper-V VHDs) to Windows Azure but I haven't found much about what kind of fault tolerance that infrastructure provides. When I run VHD in Azure, I've got two questions: Is my VHD and all the data in it safe? I think that uploaded VHDs use the "Storage" infrastructure so they should be automatically replicated to multiple disks and geographically distributed but should I still make a full-image backup just to be safe? (Note that of course I will be backing up the actual data inside VMs that I care about; I just want to know if there is a chance greater than 0.0000001% that one day I will receive an email from Microsoft telling me that my VM is gone and that I should create or restore it from scratch). Do I need to worry about other things regarding the availability of my VMs? I mean, when I have an on-premise server I need to worry about the hardware itself, about the host operating system, what would happen if my router failed, if my Hyper-V's C: drive failed etc. Am I right in thinking that with Azure, their infrastructure takes care of all of this? Thanks.

  Read the article

• Reliable router with good VPN and WAN Throughput [closed]

  - by Asdande

  I have 2 cisco rv180 VPN router. These routers are giving me lots of problems. The webpages wont load correctly, slow response to load webpages plus other many issues. I have several cases pending with cisco. I give up on these routers. I would like to know if you guys can recommend me a reliable router for our 3 branches (NY - main, SC and FL). In NY- main office, we have 55 users. In SC branch, 6 users. In Florida we only have 1 (will grow soon). I need a router capable of support: 3 VPNs Site-to-Site connection VPN throughput of at least 40-50 Mbps WAN throughput at least 100 Mpbs and up PPTP Server for at least 5 PPTP users Web filtering - all users need access to internet Good Firewall Port forwarding for FTP Server - able to show the public IPs of FTP users (rv180 cannot do that, just shows me router's LAN interface IP, opened a case with cisco, now escaleted to level 2, still no answer or workaround) Dual WAN ports for balance or backup internet. Gigabit WAN/LAN ports Price between $400-$500 range. I was thinking on the TP-LINK TL-ER6120 or TL-ER6020 according to the review on smallnetbuilder.com http://www.smallnetbuilder.com/lanwan/lanwan-reviews/31983-tp-link-tl-er6020-safestream-gigabit-dual-wan-vpn-router-reviewed but I don't want to make another mistake as I did when I bought the cisco RV180. Thank you in advance,

  Read the article

• Routing public IPs (each a /32) through a VPN to another server

  - by Lee S

  Hopefully the title makes sense; I have a server currently in a colo facility, with many IP addresses routed to it. They are individual IPs and not in a contiguous block. Due to vastly improved connectivity (fibre) at home I am slowly bringing my infrastructure in-house for managability and eventually, cost savings. What I would like to do though is use the IP addresses allocated to my existing server, at home. I have an IP block allocated to me on my new ISP connection, but for a couple of reasons I'd like to make use of the colo ones for now: Ease of transition - lots of domains, dns, hard-coded IPs in programs, etc. Connectivity fallback. If my primary line goes down and switches to fallback 1 (dsl) or fallback 2 (4G), I lose access to the ISP-allocated IP block of IPs that are only presented on the primary WAN interface. What I'd like to achieve is my home virtualisation server (Proxmox/Debian-based) "dials in" to the colo server in the colo facility (also Proxmox/Debian) via VPN or similar, and gets to make use of the IP addresses that currently terminate on the colo box. If the primary connection to my ISP goes down and one of the fallback routes kicks in, the VPN tunnel will just time out and then be re-established on the backup connection instead. I'm sure this is doable, but I have no idea how. I'm not afraid to get my hands dirty, I just don't really know where to start?

  Read the article

• SQL Server 2005 to 2008 DB attach elp please!

  - by Brandon

  I have SQL Server 2005 Standard on my personal machine. I created a very big DB about 21 gb. I made a backup and transferred the .bak file via an ftp program to my dedicated server. I have SQL Server 2008 Enterprise Edition on my dedicated server. I tried restore the transferred .bak file but got an error. I posted the error on here and was told the database is corrupt. How? I don't know. The connection was not interrupted during the ftp transfer. The DB works on my own machine. So then I detached the db on my own machine and transferred the mdf and ldf file to my dedicated server through ftp again and again there were not interruptions. Now I try to attach the db and get this error: The header for file 'DB.mdf' is not a valid database file header. The FILE SIZE property is incorrect. (Microsoft SQL Server, Error: 5172) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.00.1442&EvtSrc=MSSQLServer&EvtID=5172&LinkId=20476 I already wasted 21 gb transferring the .bak file. Now I used another 21 to transfer mdf and additional ldf file. Please tell me there's a solution. The db can detach and attach fine on my machine in sql server 2005 but not SQL server 2008 on my server.

  Read the article

• Cisco 851 (IOS) router: FastEthernet 4 (WAN) got the shutdown flag.

  - by cjavapro

  At a customer location there was a Cisco 851 router (which uses IOS). The PCs on location were all of a sudden unable to connect. We came on site and found that FastEthernet 4 (the WAN port) was "administratively down". We ran these commands to resolve it config t interface fa4 no shutdown exit exit write Now the mystery is how the shutdown flag got there in the first place? The router was on battery backup... but during the outage it was power cycled by the customer. It is possible that there was a short outage by the ISP and that the power cycle caused the shutdown flag to come up. There may have been a hack or an attack pattern that caused the shutdown flag to come up. There may have been a hack or an attack pattern that the router to become unavailable and then caused the shutdown flag to be added on startup. Question: Does anybody have any clues? or at least remember that they had a shutdown flag come up on their WAN port also?

  Read the article

• 150 TB and growing, but how to grow?

  - by seandavi

  My group currently has two largish storage servers, both NAS running debian linux. The first is an all-in-one 24-disk (SATA) server that is several years old. We have two hardware RAIDS set up on it with LVM over those. The second server is 64 disks divided over 4 enclosures, each a hardware RAID 6, connected via external SAS. We use XFS with LVM over that to create 100TB useable storage. All of this works pretty well, but we are outgrowing these systems. Having build two such servers and still growing, we want to build something that allows us more flexibility in terms of future growth, backup options, that behaves better under disk failure (checking the larger filesystem can take a day or more), and can stand up in a heavily concurrent environment (think small computer cluster). We do not have system administration support, so we administer all of this ourselves (we are a genomics lab). So, what we seek is a relatively low-cost, acceptable performance storage solution that will allow future growth and flexible configuration (think ZFS with different pools having different operating characteristics). We are probably outside the realm of a single NAS. We have been thinking about a combination of ZFS (on openindiana, for example) or btrfs per server with glusterfs running on top of that if we do it ourselves. What we are weighing that against is simply biting the bullet and investing in Isilon or 3Par storage solutions. Any suggestions or experiences are appreciated.

  Read the article

• Server 2008R2 Server Manager Roles and Features won't refresh or allow addition of new roles or features

  - by MattChorba

  I have a standalone DC in an isolated lab. I have installed the SUR tool and found no errors. I ran SFC and found no errors. I have attempted to install Windows Backup feature using Powershell, but received the same error about the computer needing to be restarted. Powershell cmdlets will list all of the installed roles and features. The rest of Server Manager works without problems. What can I do to get Server Manager Roles and Features working properly again? Picture of Error: CheckSUR.log: ================================= Checking System Update Readiness. Binary Version 6.1.7601.21645 Package Version 13.0 2011-11-28 13:20 Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store Summary: Seconds executed: 413 No errors detected (w) Unable to get system disk properties 0x0000045D IOCTL_STORAGE_QUERY_PROPERTY Disk Cache CheckSUR.persist.log: ================================= Checking System Update Readiness. Binary Version 6.1.7601.21645 Package Version 13.0 2011-11-28 13:20 Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store Summary: Seconds executed: 413 No errors detected (w) Unable to get system disk properties 0x0000045D IOCTL_STORAGE_QUERY_PROPERTY Disk Cache

  Read the article

• Rescue system running TFS that BSODs, into vmware esxi

  - by 3molo

  Hi, After moving to new facilities, one of our old Dell servers running Windows Server 2003 R2 on PowerEdge 2650 HW BSODs with 0x8e. The server runs Team Foundation Server, so we have a few guys dependent on it. No one here knows TFS, so we have no idea how difficult it would be to setup from scratch. We have the MSSQL database(s) backed up, recent and fresh copy. Tried removing/refitting memory modules, but with no success. The system boots into safe mode but hangs occasionally. I booted a linux livecd and did a dd of both c: and d:, so I have all the data in compressed images on a vmware machine. For the guest, I created a 38G (actually it became 40GB) partition to act as C:, and booted a live cd. I then uncompressed the compressed disk image of c: and dd'd it to the new c: using 'gunzip -dc c.img.gz | dd of=/dev/sda1 bs=1M'. The operation ran for about 1000 seconds, and completed successfully. I assumed it would at least try to boot windows (but most likely BSOD due to not having correct drivers), but the Vmware ESXi guest does not seem to recognize it as a bootable disk. We don't have the vmware enterprise license, so the vmware converter cold cloning is not an option. Did I do something wrong in my dd's etc with the ISOs, or why would it not (try to) boot? Am I wasting my time? What other approach is there? Will continue to try to remove services and drivers to make the physical machine at least work reasonably well in safe mode. What do you suggest? 1. Continue to get the dd'd images to the virtual disk and get it to boot. 2. Install a new windows server, get team foundation server and restore from backup. 3. Focus on the old problematic hardware Any help appreciated

  Read the article

• SQL Server 2012 Maintenance Plan can't modify

  - by Crazyd

  Click on any created Maintenance Plan: TITLE: Microsoft SQL Server Management Studio Value cannot be null. Parameter name: component (System.Design) BUTTONS:OK Create a new Plan I get this error: TITLE: Maintenance Plan Wizard Progress Saving maintenance plan failed. ADDITIONAL INFORMATION: The SaveToSQLServer method has encountered OLE DB error code 0x80004005 (Unspecified error). The SQL statement that was issued has failed. The SaveToSQLServer method has encountered OLE DB error code 0x80004005 (Unspecified error). The SQL statement that was issued has failed. BUTTONS:OK Edit an already created Backup Plan: Error 1 Error loading 'BackupDb' : The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Unspecified error). The SQL statement that was issued has failed. . server=SERVER;package=Maintenance Plans\BackupLeadsDb; 1 1 Attemped Solutions: I've changed password for SA Account; I use Windows Authentication to log in; and I've registered C:\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTS.dll. Repair SQL Server 2012, Uninstall/ReInstall SQL Server 2012.

  Read the article

• Can a OS be copied from one hard drive to another and still boot?

  - by AlexMorley-Finch

  Background My computer gets stuck on the make and model screen after the BIOS screen, aka the Toshiba screen. After some research I've realized that the problem is the hard drive. I'm using an old 250gb model that USED to be used for backup purposes, however I loaded windows 7 ultimate onto it This hard drive has trouble getting up to full RPM therefore cannot boot correctly until its warmed up. meaning that my pc needs to be restarted several times before it boots (once it took my 13 reboots to get my pc on!) From my research its either that, or lack of power supply, and I've tried multiple PSUs. Question I have my OS and all my files on this 250gb HDD... If I were to literally open the explorer, and copy EVERYTHING (including hidden files obviously) from this 250gb, to a spare 500gb I've got knocking about... Will it boot if I just copy everything? I cannot be bothered to load another OS onto my PC so if there is a way I can just copy the existing one over from one HDD to another and have it boot normally. This would be epic! I've heard about HDD cloning software. But before I purchase and/or download this software, I need to know if i can just copy the OS over through the windows explorer

  Read the article

• Multiple Routers, Failover, DHCP and multiple gateways. NOT WAN-failover

  - by u_b

  I've had a look around google and this forum but could not find an answer to my question. So probably one of you can help me a little. My intended setup is: Router R1: wan connection to isp. connected backup server. provides some wireless SSID. other connected devices like printer, laptop, etc. both wired and wireless. Router R2: no wan connection to isp but connected to R2. connects mp3-streamer and music server. also serves as a wireless access point with same SSID. other than described connections only wireless connections. I would like to be able to control music even if R1 is off, e.g. with no internet connection. On the other hand I would like to access internet also in the case that R2 is off, i.e. no music access. Last but not least I would like to stream internet radio, i.e., R1 and R2 are on, and music is streamed from internet to R1 to R2 to streamer. I would like to realize all this using DHCP (also using static assignments) so i do not have to configure statically on android, laptop, etc. So my questions are: Can I make DHCP provide a list of two default gateways R1,R2? In order to make clients fallback to other gateway if currently assigned gateway is turned off? Thanks in advance, u_b

  Read the article

• System randomly freezes yet mouse still moves, SSD out of reallocatable sectors, should I replace it?

  - by user784446

  This problem has lasted for the past 48 hours. The first time it happened, a program I was running stopped responding, so I tried to end it from task manager. The processes at first were listed fine until hovered upon. Eventually, despite the mouse still being able to move, after a few persisting clicks the mouse finally stopped moving. The screen went blank shortly thereafter. The second time it occurred, items on the screen stopped responding - hovering over the taskbar or such wouldn't elicit a response. Sound would still play however. Eventually, the mouse became unresponsive and the system restarted itself. I suspect that it may be a problem of my SSD drive. After looking through some Google search results, I downloaded HDTunePro to determine if there's a problem with the drive. Results returned a problem of reallocated sector count. An error scan also revealed 48 bad sectors. Also, an attempt to backup the contents of the most important areas of the drive returned a few explorer "Error: cannot read source from disk" errors. Should I ditch the drive and use another drive or is there anything that can be done to repair the drive? SSD: OCZ Petrol 64gb CPU: AMD Athlon II X4 640 RAM: Generic 3GB DDR2 Motherboard: Gigabyte MA74GM-S2H OS: Windows 7 Ultimate x64 Thanks!

  Read the article

• Full Apache config migration

  - by Victor Rashkov

  I searched alot and didn't find an applicable answer. I have a working LAMP setup on Ubuntu machine and I have to migrate to a new server in a different country. The old server is 11.10, the new server is 12.04LTS. My problem is that I simply can not remember the steps I followed when I configured the current server which is not the basic LAMP install. It is Apache with FastCGI, SuEXEC, a GD library, worker MPM and all sitting on top of a mhddfs system. There are also other configs I've changed and I can not recall what they are. Because of the complexity of the setup, my attempts to migrate to the new server fail. I get permissions errors, cgi problems etc. Therefore my question is : Is there a sane way to simply tar a full backup of the current web server installation, including MySQL, Php amd the apache server with all configs, and then move it to the new machine? I shall be forever thankful on any advise. So far non of thise I found here gave me an answer. Thanks!

  Read the article

• GRUB having problems with my sda1 UUID

  - by Igoru

  I was having trouble trying to setup triple boot on my computer... (Take a look at this thread if you think it would help). I ended up by having a GRUB menu that has Ubuntu entries and "Windows" entry, that calls an EasyBCD menu to choose between Windows 7 and XP. Everything would be fine if, only if, GRUB was set up correctly. I can't find why, but it throws me this when I try to open Ubuntu: I've already tried to remove the menu.lst and do a grub-update, and a grub-install too. I tried to create a symlink to /dev/sda1 at /dev/disk/by-uuid/<<uuid that is there>>, just like the other UUIDs that were there... But I couldn't find that symlink at that busybox that opened when it thrown me the error. Any ideas? [UPDATE] This is the GRUB entry with problems: title Ubuntu 9.04, kernel 2.6.28-15-generic uuid b1ed36e5-4d84-4eb8-86ef-6f1135ffc238 kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=b1ed36e5-4d84-4eb8-86ef-6f1135ffc238 ro quiet splash initrd /boot/initrd.img-2.6.28-15-generic quiet And this my /dev/disk/by-uuid folder: 04DCBCFBDCBCE856 - ../../sdb1 (NTFS backup disk) 4434E77734E769FE - ../../sda4 (NTFS WinXP) ACB09F0DB09EDCE0 - ../../sda2 (NTFS Win7) b5311be8-a853-4fdd-aed5-d65974b3c0c4 - ../../sda5 (EXT4 home) C04B-4D97 - ../../sdc (FAT32 live-pendrive from which i'm running) D28447F68447DB9B - ../../sda6 (NTFS files partition) e0e88f38-d815-423a-9d5e-64b9c74a8b92 - ../../sda7 (swap)

  Read the article

• virtualized windows 2003 domain with CentOS 5.3 and poor connectivity

  - by Chris Gow

  I have a test lab set up running a virtualized windows 2003 domain on a CentOS 5.3(xen) host and am experiencing connectivity problems with guests running on other hosts that are part of the same domain. Here's the setup: On Computer A I have CentOS 5.3 running as the host and have virtualized windows 2003 servers for a primary domain controller, a backup domain controller and an exchange server. The primary domain controller also acts as a WINS and dns server. The windows domain appears on a separate subnet from my company's corporate network. Connectivity to any of the virtualized guests on Computer A is fine (remote desktop, ping, what have you). I have another host computer (Computer B) that also has a virtualized Windows 2003 server guest that is part of the same domain. However, connectivity to that guest is flaky at best. I continuously get at least 60% packet loss when I try to ping the guest, and due to that flakiness I can not access any of the services that it runs (remote desktop, web). Now here's the interesting part. It seems to affect only machines running on a different computer than the domain controller that are in the same domain. On Computer B there is another Windows 2003 guest that is not part of the test domain and is on my corporate network. There's no connectivity issues with that guest machine. The problem does not seem to be specific to Computer B either. I created a test VM on my local computer within the test domain and it exhibits the same behaviour as the guest in Computer B. A couple of items to note: - Host OS on both Computer A and B are the same CentOS 5.3 64 bit - Guest OS is Windows 2003 64 bit and 32 bit (the guest on Computer B is 32 bit) - Guest OSes are all up to date (as of Monday) - Host OS on Computer A was upgraded from CentOS 5.2 to 5.3 Update: Sorry I did not follow up with the comments from below. Computer A and B have been moved to their own dedicated switch and the problem has gone away. I'm not sure what the underlying problem(s) were though

  Read the article

• Library conflict in Mac OS X

  - by Juan Medín

  I was trying to install the ImageMagick library on Mac OS X Snow Leopard, and first I tried port and, after it failed, homebrew. It updated some dependencies and installed ImageMagick without problems. So far so good. The problem came when I ran Apache. I got the following error in the system log: 07/04/11 12:55:15 org.apache.httpd[41841] httpd: Syntax error on line 115 of /private/etc/apache2/httpd.conf: Cannot load /opt/local/apache2/modules/libphp5.so into server: dlopen(/opt/local/apache2/modules/libphp5.so, 10): Library not loaded: /opt/local/lib/libpng12.0.dylib\n Referenced from: /opt/local/apache2/modules/libphp5.so\n Reason: image not found I checked the /opt/local/lib and surprise! I don't have the libpng12.0 but the libpng14.0. So, as far as I can tell, something went wrong installing the ImageMagick library. Now, I can't find a way to rollback to the previous libraries, other than copying them from the backup. Do you know if is there a way to recover the previous state or reinstall Apache? Or is this just a corrupt state and I must reinstall OS X?

  Read the article

• Unrelated Files Corrupted on System Restore

  - by Yar

  I restored OSX 10.6.2 today (was 10.6.3 and not booting) by copying the system over from a backup. The data directories were not touched. In the data directories, I'm seeing some files as 0 bytes, and getting permission-denied errors when copying, even when using sudo cp or the Finder itself. Some programs, differently, take the files at face value and see no permission problems (such as zip), but they see the files as zero bytes, which would be game-over for recovery. cp: .git/objects/fe/86b676974a44aa7f128a55bf27670f4a1073ca: could not copy extended attributes to /eraseme/blah/.git/objects/fe/86b676974a44aa7f128a55bf27670f4a1073ca: Operation not permitted I have tried sudo chown, sudo chmod -R 777 and sudo chflags -R nouchg which do not change the end result. Strangely, this is only affecting my .git directories (perhaps because they start with a period, but renaming them -- which works -- does not change anything). What else can I do to take ownership of these files? Edit: This question comes from StackOverflow because I originally thought it was a GIT problem. It's definitely not (just) GIT. Anyway, this is to help put some of the comments in context.

  Read the article

• Truecrypt files corrupted after moving PC into another case

  - by Dygerati

  I recently bought a new PC case and transferred all of my PC hardware into it. The only hardware modification was the addition of two identical ram modules. The entire process went smoothly, and everything worked and booted as before. The only side-effect I found when accessing one my of file-based hidden truecrypt volumes shortly there after. Some of the files in the volume - NOT all - seemed to be entirely corrupted. The directory and file names are garbled characters, but a few of the directories in the same volume appear and function normally. Also, all files in the non-hidden tc volume were still intact. Is this not weird? The only other real change I could think of would be that the hard drives were connected to different SATA ports on the mobo. I really don't know how the truecrypt encryption works well enough to know what could cause this...and the fact that not all the files were corrupted makes it more bizarre still. So, first off (and I'm not too hopeful on this point), would it be possible to restore these files? I had a backup of most, but not all of the files involved. Other than that I'm just curious how this happened and how I can prevent it next time. Thanks!

  Read the article

• Viability of Mac OS X 10.9 Time Machine Server in office environment

  - by user197609

  Currently we have about 20 Mac OS 10.9 MacBook Pros (almost all with SSDs) backing up to individual USB drives. I'd like to consolidate these to one drobo thunderbolt drive array attached to a Mac Mini server (running 10.9 server) using time machine server. My question is, will this scale to 20 users? Examples I have seen seem to be 5 or 6 users tops, and this isn't easy for me to test (I'd rather not ask everyone to backup to the array and then switch back to USB drives if it brings our network to its knees). My primary concern is saturating our gigabit network, as time machine backs up every hour for every machine, so there would usually be a couple people backing up at any given time. We also have some people occasionally on our 802.11ac network and not on ethernet (usually connected via 802.11n until people upgrade to newer machines), but most of the time people are connected to our thunderbolt displays which have a gigabit ethernet connection on them. Our network topology is one 32 port gigabit switch with 5 smaller gigabit switches at each desk cluster. The mac mini server is connected directly to the top level switch. Update: Failing information from someone who has done this in practice, I suppose my question is really around how switches work. If three or four people are backing up simultaneously, and then other two (different) users transfer a file between each other, will they be able to transfer the file at gigabit speeds?

  Read the article

• Tuning up a MySQL server

  - by NinjaCat

  I inherited a mysql server, and so I've started with running the MySQLTuner.pl script. I am not a MySQL expert but I can see that there is definitely a mess here. I'm not looking to go after every single thing that needs fixing and tuning, but I do want to grab the major, low hanging fruit. Total Memory on the system is: 512MB. Yes, I know it's low, but it's what we have for the time being. Here's what the script had to say: General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries When making adjustments, make tmp_table_size/max_heap_table_size equal Reduce your SELECT DISTINCT queries without LIMIT clauses Increase table_cache gradually to avoid file descriptor limits Your applications are not closing MySQL connections properly Variables to adjust: query_cache_limit (> 1M, or use smaller result sets) tmp_table_size (> 16M) max_heap_table_size (> 16M) table_cache (> 64) innodb_buffer_pool_size (>= 326M) For the variables that it recommends that I adjust, I don't even see most of them in the mysql.cnf file. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] innodb_buffer_pool_size = 220M innodb_flush_log_at_trx_commit = 2 innodb_file_per_table = 1 innodb_thread_concurrency = 32 skip-locking big-tables max_connections = 50 innodb_lock_wait_timeout = 600 slave_transaction_retries = 10 innodb_table_locks = 0 innodb_additional_mem_pool_size = 20M user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking bind-address = localhost key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 4 myisam-recover = BACKUP query_cache_limit = 1M query_cache_size = 16M log_error = /var/log/mysql/error.log expire_logs_days = 10 max_binlog_size = 100M skip-locking innodb_file_per_table = 1 big-tables [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] [isamchk] key_buffer = 16M !includedir /etc/mysql/conf.d/

  Read the article

• Advice for UPC/Surge Protector in home office

  - by Fred

  I'm just starting out as an independant developer, mostly Unix stuff with some Windows thrown in occasionally. I've been running two machines, a linux and a windows dev machine. Long story short, we had a bad storm come through last week and I unplugged one machine, forgot to unplug the other and the p/s and mobo ended up dead. Luckily I backup to an external service religiously (rsync.net for anyone interested), so there was no loss in data, but it did show me a glaring hole in my current setup, namely, lack of UPC and Surge Protection (this has honestly never been an issue before). Can anyone recommend a UPC/Surge Protector for a home office? It only needs to support a single machine (I opted to use vmware instead of rebuilding that machine), but it's a quad core Phenom 2 with a 1k watt p/s. This is outside my experience so I thought I'd get some input from others. I'm looking for something that's reasonably priced and does the job reasonably well. I don't need absolute 100% uptime, just something to protect my PC better than it is now.

  Read the article

< Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >