Search Results

Search found 13738 results on 550 pages for 'compilation errors'.

Page 264/550 | < Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >

• spawn-fcgi/ fast CGi php crashes without traces in logs, on Gentoo

  - by user39046

  Hello, I recently moved from apache to a Nginx/fastcgi solution, I had it running on a Fedora system and had no problems, but, since i moved all to Gentoo , the Spawn-fCGI / fastcgi php daemon dies, and i can't find out any errors reports on /var/log/messages , so i don't know why this happens. I've seen that fastcgi is somehow different from the fedora distro, on gentoo as it has different conf files and init.d startup scripts, Can someone help me make it more stable? The number of requests that i had isn't any different from the ones I had on fedora, so i use the default conf that comes with the distro..and in about some hours it simply dies... Thank you very much

  Read the article

• open_basedir vs sessions

  - by liquorvicar

  On a virtual hosting server I have the open_basedir set to .:/path/to/vhost/web:/tmp:/usr/share/pear for each virtual host. I have a client who's running WordPress and he's complaining about open_basedir errors thus: PHP WARNING: file_exists() [function.file-exists]: open_basedir restriction in effect. File(/var/lib/php/session/sess_42k7jn3vjenj43g3njorrnrmf2) is not within the allowed path(s): (.:/path/to/vhost/web:/tmp:/usr/share/pear) So the PHP session save_path isn't included in open_basedir but sessions across all sites on the server seems to be working fine apart from in this intermittent instance. I thought that perhaps the default session handler ignored open_basedir and this warning was caused by WP accessing the session file directly. However from what I can see PHP 5.2.4 introduced open_basedir checking to the session.save_path config: http://www.php.net/ChangeLog-5.php#5.2.4 (I am on PHP 5.2.13). Any ideas?

  Read the article

• How to know which block device maps to which physical drive

  - by Karolis T.

  I have a server with software RAID 1, two hot-swap sata disks. One hard drive started showing errors, I'm thinking about removing and replacing it, only problem is that I have no idea which of the two correspond to which devices. And I can't shut the server down to find out. I have /dev/sda and /dev/sdb, /dev/sda is the failing one. Thought about doing something along the lines # mdadm --manage /dev/md0 --remove /dev/sda1 then somehow stop/suspend the drive using tuning software and try to listen which of the two stopped, but that's not gonna work in a noisy server environment. Drive panels have no LEDs. Thanks for any ideas!

  Read the article

• Bulk Email Verification Tool

  - by JoefrshnJoeclean

  I'm looking for a bulk email validation tool to parse a list of 60K email addresses. Our company sends out 8 Million email newsletters a month via our mailing list software - MDAEMON. MDAEMON ships with a bad email address validator but I'm not quite comfortable with its results as it captures returned email addresses with SMTP errors of 500 and above. (We want to keep emails that return a Full Mailbox error or bounce backs that see us as SPAM) To further prune the list, we use Advanced Email Verifier. But I tested a random sample of this list and found a couple emails to be valid. Since our company relies heavily on traffic from our newsletters, I am wondering what other Windows-based bulk email verifier tools are out there?

  Read the article

• Apache and mod_authn_dbd DBDPrepareSQL error

  - by David Brown

  I am running Apache 2.2.17 on Suse Linux 11. I have installed the mod_authn_dbd module to allow authentication using a MySQL database. Simple digest authentication works absolutely fine using the following directive: AuthDBDUserRealmQuery "SELECT loginPassword FROM login WHERE loginUser = %s and loginRealm = %s" However, I would like to both generalize this statement and prepare it for performance and security reasons. Thus, I used the following directives instead: DBDPrepareSQL "SELECT loginPassword FROM login WHERE loginUser = %s and loginRealm = %s" digestLogin AuthDBDUserRealmQuery digestLogin These directives generate the following errors: [...] [error] (20014)Internal error: DBD: failed to prepare SQL statements: [...] [error] (20014)Internal error: DBD: failed to initialise Why does my actual SQL statement work when used directly, but not when I try to prepare it? (Note I have tried using '?' and '%%' in place of '%', to no effect.)

  Read the article

• How do I set "MaxPermSize" for Atlassian Fisheye/Crucible running as service on Win2k3?

  - by Jeremy

  I have been trying to setup Atlassian Fisheye/Crucible as a service on Win 2K3 R2 for two weeks. I keep getting various "java.lang.OutOfMemoryError: PermGen space" errors, which crash Fisheye and force me to restart the service. I've followed the example on the Atlassian support site to configure MaxPermSize within the service wrapper. However, when I check SysInfo inside the Fisheye Admin pages and the debug log, I don't see any confirmation. The Java Heap info is in both places, so I'd expect the MaxPermSize setting to show up in both places. The error is persisting and Atlassian support has been little help. I appreciate any help.

  Read the article

• How do I remove a repository of yum

  - by sunil

  When I search for a package in yum(centos 6), it tries to search in a repro named 'c6-media' And it gives a bunch of errors as follows file:///media/CentOS/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/CentOS/repodata/repomd.xml Trying other mirror. file:///media/cdrecorder/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/cdrecorder/repodata/repomd.xml Trying other mirror. file:///media/cdrom/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/cdrom/repodata/repomd.xml Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: c6-media. Please verify its path and try again Obviously the error seems to say that yum is trying to search for the CD/DVD which installed the OS. I do not have it now. All I want to do now is to delete this repository from yum. I went to the package manager graphical tool and removed this from the sources. Seems yum and the graphical tool do not use the same config. This is just my guess.

  Read the article

• Cannot install any Feature/Role on Windows 2008 R2 Standard

  - by Parsa

  I was trying to install Exchange 2010 prerequisites, when I encountered some error. All look like the same. Like this one: Error: Installation of [Windows Process Activation Service] Configuration APIs failed. the server needs to be restarted to undo the changes. My server is running Windows Server 2008 R2 Standard Edition. UPDATE: I tried installing the prerequisites one by one using PowerShell. Now I have errors on RPC over Http proxy: Installation of [Web Server (IIS)] Tracing Failed, Attempt to install tracing failed with error code 0x80070643. Fatal error during installation. Searching about the error code doesn't tell me much more than something went wrong when trying to update windows. Installing Http Tracing alone also doesn't make any difference.

  Read the article

• Error Installing ruby with RVM Single User mode on Arch Linux

  - by ChrisBurnor

  I've just installed RVM on ArchLinux x64 in single user mode via the recommended install script curl -L https://get.rvm.io | bash -s stable I've also installed all the requirements listed in rvm requirements However, I'm having trouble actually installing any version of ruby. And getting the following error: arch:~ % rvm install 1.9.3 No binary rubies available for: ///ruby-1.9.3-p194. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Fetching yaml-0.1.4.tar.gz to /home/christopher/.rvm/archives % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 460k 100 460k 0 0 702k 0 --:--:-- --:--:-- --:--:-- 767k Extracting yaml-0.1.4.tar.gz to /home/christopher/.rvm/src Prepare yaml in /home/christopher/.rvm/src/yaml-0.1.4. Configuring yaml in /home/christopher/.rvm/src/yaml-0.1.4. Error running ' ./configure --prefix=/home/christopher/.rvm/usr ', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/yaml/configure.log Compiling yaml in /home/christopher/.rvm/src/yaml-0.1.4. Error running 'make', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/yaml/make.log Please note that it's required to reinstall all rubies: rvm reinstall all --force Installing Ruby from source to: /home/christopher/.rvm/rubies/ruby-1.9.3-p194, this may take a while depending on your cpu(s)... ruby-1.9.3-p194 - #downloading ruby-1.9.3-p194, this may take a while depending on your connection... ruby-1.9.3-p194 - #extracting ruby-1.9.3-p194 to /home/christopher/.rvm/src/ruby-1.9.3-p194 ruby-1.9.3-p194 - #extracted to /home/christopher/.rvm/src/ruby-1.9.3-p194 Skipping configure step, 'configure' does not exist, did autoreconf not run successfully? ruby-1.9.3-p194 - #compiling Error running 'make', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/make.log There has been an error while running make. Halting the installation. The log files are as follows: arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/yaml/configure.log __rvm_log_command:32: permission denied: arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/yaml/make.log make: *** No targets specified and no makefile found. Stop. arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/make.log make: *** No targets specified and no makefile found. Stop.

  Read the article

• Im getting the "Console Window Host has stopped working" popup in a few places.

  - by m1sk

  Im running Windows 7 on a 17 inch Macbook Pro, late 2011. Last Saturday I opened my laptop(It was either asleep or shutdown before hand) and suddenly had a whole bunch of problem. First off I got a few of pop-errors, my macbook was out of battery. I also had problems with my trackpad(no scrolling or right-click), which I fixed by reinstalling bootcamp. Now a days when ever I run cmd I get the popup Console Window Host has stopped working If I chose the Close the program I get another popup The application was unable to start correctly (0xc0000142) Click OK to close the application. This doesnt happen just with cmd if un/install a program I get similar popups(first one). And in some other case like in visual studio when i was working on class work.

  Read the article

• Communicator Messages not being saved to Outlook due to Outlook Integration error

  - by Mark Rogers

  For the most part my Office Communicator appears to be configured correctly. I can login to my work account and see the work contact list. Outlook is working perfectly had a weird profile problem initially but that was fixed. Unfortunately, even though I have set the setting that says: Save my instant message conversations in the Outlook Conversation History folder. My conversations have stopped saving to the Outlook Conversation History folder. Also I have a yellow warning message on top of the server icon next to the status field. When I hover or click on the message, it says there is an Outlook Integration Error. The administrator is having trouble figuring out what is causing it. What can cause Outlook Integration Errors in Communicator and how do I go about trouble shooting them?

  Read the article

• Problems with login scripts on Terminal Server 2008

  - by discovery

  We are having issues with login scripts not running on Windows 2008 Terminal Server. This is a brand new implementation and they have never worked. The test user in question doesn't have any problems running login scripts on their workstation. I have tried logging into the server directly with their account, but still no scripts run. I have setup a test account with Domain Admins rights in the same OU as theirs and the scripts don't run. I can manually run the scripts from the SYSVOL\somedomain.com\Policies folder and they run fine. The Terminal 2008 Server is in a mixed 2003/2008 domain. The user can run the gpupdate on the server without error. I have also run the Group Policy Results for this user and the terminal server and everything looks good, no errors. Any suggestions?

  Read the article

• Windows 2008 and Truecrypt: can't access shared folder called "media"

  - by Sajee

  On my Windows 2008 system, I've attached an external USB drive that's encrypted using Truecrypt. Once I mounted the Truecrypt drive, I share some of the directories from that drive using Windows file sharing. I tried sharing a folder called "media" and when I try to access that folder from a Vista client on my LAN via \myserver\media, I get this error: \myserver\media is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. An unexpected network error occurred. If I share the folder media under some name such as fizzbuzz then I can access \myserver\fizzbuzz w/o any errors. Any clues as to why this is happening? Related: http://serverfault.com/questions/27684/windows-2008-and-truecrypt-how-to-automatically-mount-shared-folders-after-rest

  Read the article

• Auto Start of Proftpd on OpenSuse Linux

  - by a_ak

  I´m trying to activate the Ftpservice on my Root Server, i have OpenSuse installed, and I´m using the xinetd method .. i added this to my xineted.conf: service ftp { flags = REUSE socket_type = stream protocol = tcp wait = no user = root server = /usr/sbin/in.proftpd disable = no } I´m not sure about this "server = /usr/sbin/in.proftpd" .. i added the code directly in the xinetd.config and not in a seperate file.. and to my proftpd.conf as the documentation of profdtp ( was already setted) : ServerType inetd Then I restarted the xineted service .. and no errors to see, but the proftpd ist still not statrting/launching .. I searched alot on google, but everywhere they say to do what i did abouve, nothing more.. did i miss something ?

  Read the article

• Find and free disk space that is unused but unavailable (due to file system error, etc.)

  - by Voyagerfan5761

  Sometimes I get the feeling that if an app such as μTorrent allocates files on my FAT32-formatted flash drive, but then is killed or crashes (as happens more than a few times a month), that space just disappears from my file system. Whether or not that is the case, sometimes I do get a chill from wondering if I've lost hundreds of MB in available storage due to carelessness or malfunctions. Checking my disk with WinDirStat just makes it worse, because I see the huge "<Unknown>" item at the disk root staring at me, eating up well over a gigabyte. It might be FS inefficiency (due to 32 or 64kb sector/cluster size and a lot of tiny files) or it might be a glitch... Is there a tool I can download and run to check my file system and make sure that there aren't any unused allocated blocks on the disk? I want to make sure I'm not losing any disk space to I/O errors, etc.

  Read the article

• Can connect to Samba server but cannot access shares?

  - by jlego

  I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. Needs to be able to share files with a PC running Windows 7 and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error 0x80070035 " Windows cannot access \SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error "The original item for ShareName cannot be found." When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? UPDATE 2: As the directory I am trying to share is actually an entire internal disk, I have tried to things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. UPDATE 3: Not sure exactly what I did, but now whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Any suggestions? UPDATE 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. UPDATE 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally) UPDATE 6: Figured it out. See answer below

  Read the article

• Oracle Installation issue on Oracle Linux 6.4

  - by Pradhyoth

  I am trying to install Oracle 11g(11.2.0.1.0) on Oracle Linux 6.4(Remote Server). I get the following error(s) when Database Configuration Assistant is running ORA-01092: ORACLE instance terminated Disconnection forced ORA-48210: Relation Not Found Can someone help me regarding this errors, I cant seem to find what exactly that I have to do to solve this issue. I have done the same install on Oracle Linux 5.7 but never faced this issue before. The only problem while installing(which happens on 5.7 too) is that the required packages fail, but upon checking, it seems much higher versions are already installed. Also I cant do a yum update because the system seems to have connectivity issues with public-yum.oracle.com as I cant ping it(even though the IP Address gets resolved)

  Read the article

• Cannot install any Feature/Role on Windows Server 2008 R2 Standard

  - by Parsa

  I was trying to install Exchange 2010 prerequisites, when I encountered some error. All look like the same. Like this one: Error: Installation of [Windows Process Activation Service] Configuration APIs failed. the server needs to be restarted to undo the changes. My server is running Windows Server 2008 R2 Standard Edition. UPDATE: I tried installing the prerequisites one by one using PowerShell. Now I have errors on RPC over Http proxy: Installation of [Web Server (IIS)] Tracing Failed, Attempt to install tracing failed with error code 0x80070643. Fatal error during installation. Searching about the error code doesn't tell me much more than something went wrong when trying to update windows. Installing Http Tracing alone also doesn't make any difference.

  Read the article

• SSRS Subscription Fails

  - by Chad

  Our SSRS server is not executing a subscription correctly. (Only subscription we have btw) We created a subscription to export a report as an excel file to the file system. Tried running the job that gets generated, and this error happens 'EXECUTE AS LOGIN' failed for the requested login 'NT AUTHORITY\NETWORK SERVICE'. The step failed. It's not the most helpful in tracking down what exactly it was trying to do. EDIT Digging further into the logs I also get these errors w3wp!extensionfactory!f!7/30/2010-14:29:26:: w WARN: The extension Report Server FileShare does not have a LocalizedNameAttribute. w3wp!extensionfactory!11!7/30/2010-14:34:48:: w WARN: The extension Report Server Email does not have a LocalizedNameAttribute.

  Read the article

• Virtual dedicated server repetitive draining RAM, OOM constantly

  - by Deerly

  My linux (fedora red hat 7) virtual dedicated server has been experiencing OOM multiple times a day for the past several days. I thought the issue was with spamd/spamassassin but after disabling this the errors remains. The highest usage displayed on ps faux --cumulative: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 28412 8.7 0.5 309572 109308 ? Sl 22:15 0:17 /usr/java/jdk1. mysql 7716 0.0 0.0 136256 18000 ? Sl 22:12 0:00 _ /usr/libexe named 17697 0.0 0.0 120904 15316 ? Ssl 22:09 0:00 /usr/sbin/named I'm not running any java applications so I'm not sure why the top issue is showing up. It is frustrating as I barely have anything running on the server and use the tiniest fraction of bandwidth. Any help or suggestions on zeroing in on the source of the drain would be much appreciated! Thanks!

  Read the article

• Issue with IIS...SERVER APPLICATION UNAVAILABLE

  - by SVI

  My web application was running absolutely fine. Just 2 days back, I got an error saying. SERVER APPLICATION UNAVAILABLE I am pretty certain that nothing was changed on IIS. Unless my automatic Windows updates screwed it up completely. My event viewer had zillions of following errors in Application category. aspnet_wp.exe could not be started. The error code for the failure is C0000005. This error can be caused when the worker process account has insufficient rights to read the .NET Framework files. Please ensure that the .NET Framework is correctly installed and that the ACLs on the installation directory allow access to the configured account. I reinstalled IIS. After installing, i ran aspnet_regiis -i for framework v2 and now it throws error saying - The application could not be initialized properly. Any ideas what going on?

  Read the article

• SQL Server Rights to backup drive

  - by Sam

  I'm trying to copy a backup I've made from one server to another using either an SSIS or Powershell step in a job. I've run into the same error on both systems when running the step under the sql agent. I receive errors that the path does not exist. I've tried granting the agent rights to e:\backups, where the file is located, but it still doesn't work. When I use a proxy for the step, it works fine. Can anyone help me with what permissions to grant to sqlagent? Rights look to have been granted to MSSQL$Instance1 on the backup drive.

  Read the article

• Error - Unable to access the IIS metabase

  - by jjathman

  After installing Visual Studio 2012 and opening my solution I get a series of errors in this form: The Web Application Project Foo is configured to use IIS. Unable to access the IIS metabase. You do not have sufficient privilege to access IIS web sites on your machine. I get this for each of our web applications. Things I have tried: Running Visual Studio as Administrator Running aspnet_regiis.exe -ga MyUserName Running aspnet_regiis.exe -i These seem to be common solutions for this problem but I have not had any success with them. Is there anything else I can try to do?

  Read the article

• Mysql not loading correctly

  - by mcondiff

  PHP 5.3.2 Apache 2.2.15 Mysql 5.1.X Windows XP SP3 I have now configured everything correctly but get a timeout when trying to connect to Mysql via PHP. So frustrated. I don't get an error message, the script just times out. I have made sure I have the correct paths. Fatal error: Maximum execution time of 60 seconds exceeded Any idea why this might be happening? I do a php -v from the command line and everything is normal, no errors. i upgraded PHP from 5.2.6 to 5.3.2 - does there seem to be problems or bugs with this? I am essentially using my previous PHP.ini while editing paths. I am lost. Help! If you need anything from phpinfo() or httpd.conf or php.ini let me know. else

  Read the article

• PHP vs Batch file for mysql cronjob?

  - by mysqllearner

  Hi, My server details: OS: Windows Server 2003 IIS6 Plesk 8.xx installed (currently using Plesk to set the cronjob) I need your advice. I have 2 methods: Method 1: Using php + mysqldump, create databases backup files into gzip, and then send email with attachment (each databases has around about 25mb) Method 2: Using batch + mysqldump, create databases backup files into gzip, and then send email with attachment (same, each databases has around about 25mb) My questions: Whats the difference of using php file and batch file for cronjob? Which method is better in term of backup speed and send email, and (maybe)safety (e.g., lesser file corrupt occurance)? If i set the cronjob hourly, will it effect my web performances? I mean, lets say my website has 100++ users online now, and each user making transaction to MySQL, when I perform backup at my web peak hour, will it decrease the performances, like the loading speed, prone to errors etc?? (sorry for my bad english) P.S: If you need my php and batch file code, please ask me to post it here. I didnt post it now is because, its very simple and standard code.

  Read the article

< Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >