Search Results

Search found 13652 results on 547 pages for 'full'.

Page 265/547 | < Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >

  • NDC Oslo

    - by Alan Smith
    Originally posted on: http://geekswithblogs.net/asmith/archive/2013/06/14/153136.aspx2013 has been a hectic year for conference presentations so far, NDC in Oslo has been the 6th conference I have attended, and my session there was my 11th conference presentation this year. I have been meaning to make the short trip over from Stockholm to NDC for a few years, and this was the first time I made it. I have heard a lot of great things about the event, and was impressed with the location, the sessions, and most of all the atmosphere around the event boots and during the party on Thursday evening. The session I was delivering was my “Grid Computing with 256 Windows Azure Worker Roles & Kinect” demo, which I have delivered at many events over the past 12 months. The demo went fine. I’m always a little nervous when I try to scale out the application to 256 worker roles, it almost always works well and the application will scale in minutes, but very occasionally there can be a longer delay due to the provisioning process in the Windows Azure data centers. This would not be an issue for many scenarios, but when standing on stage in front of a room full of developers you really want things to run smoothly. A number of people have suggested that I should pre-provision an environment so that it is guaranteed to be there when I run the demo during a session. For me the aim has always been to show the rapid scalability on cloud-based platforms live on stage. Pre-provisioning an environment may make for a more reliable demo but to me that would be cheating, and not half as much fun!

    Read the article

  • How to install Wacom Bamboo Pen

    - by casadrya
    I have a new Wacom Bamboo Pen. I'm using Ubuntu 10.10 64bit. After googling a little bit, I checked that xserver-xorg-input-wacom was installed. I plugged in my tablet. I rebooted my computer. Nothing special happened. I opened Inkscape. The tablet didn't work. I opened Inkscape's Input devices dialog. I didn't understand anything. I tried to blindly click some options in that dialog but nothing seemed to have any effect. Same with Gimp. After googling some more I found the linuxwacom website with source code, this didn't seem to work. So... any help? As requested: lsusb Bus 005 Device 002: ID 056a:00d4 Wacom Co., Ltd dmesg | tail [ 492.961267] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 493.144862] input: Wacom Bamboo 4x5 Pen as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input6 [ 493.158854] input: Wacom Bamboo 4x5 Finger as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input7

    Read the article

  • iTunes command+tab does not bring main window the foreground after command+h

    - by ecoffey
    Related to : Cmd-Tab does not bring iTunes to foreground There people claim that command+h will continue to work, but the behavior I'm seeing is: Launch a full screen Terminal instance (or anything else really) Launch a fresh iTunes command+h to hide it command+tab back to iTunes, this works and the main app window is given focus command+tab to Terminal command+tab to iTunes What I expect to happen: the main iTunes window is brought to the foreground and given focus. What does happen: The application menu bar shows iTunes, but an additional command+` is needed to bring the main app to foreground. I thought it might have been related to a Chrome interaction, since I'm usually commmand+tabbing between my browser and everything else, but that does not seem to be the case. I do have two "plugins" running: last.fm scrobbler Alfred app mini itunes player interface Not sure if either of those create some phantom window or something that is mixing something up. Versions of stuff: OS X: 10.6.5 iTunes: 10.1.1 (4) last.fm: can't find it, but it's recent Alfred: 0.8 (89) So after that big long rant, anyone else seeing this behavior?

    Read the article

  • Register now for the UK Windows Azure Self-paced Interactive Learning Course starting May 10th

    - by Eric Nelson
    [Suggested twitter tag #selfpacedazure] We (myself and David Gristwood) have been working in the UK to create a fantastic opportunity to get yourself up to speed on the Windows Azure Platform over a 6 week period starting May 10th – without ever needing to leave the comfort of your home/office.  The course is derived from the internal training Microsoft gives on Azure which is both fun and challenging in equal parts – and we felt was just too good to keep to ourselves! We will be releasing more details nearer the date but hopefully the following is enough to convince you to register and … recommend it to a colleague or three :-) What we have produced is the “Microsoft Azure Self-paced Learning Course”. This is a free, interactive, self-paced, technical training course covering the Windows Azure platform – Windows Azure, SQL Azure and the Azure AppFabric. The course takes place over a six week period finishing on June 18th. During the course you will work from your own home or workplace, and get involved via interactive Live Meetings session, watch on-line videos, work through hands-on labs and research and complete weekly coursework assignments. The mentors and other attendees on the course will help you in your research and learning, and there are weekly Live Meetings where you can raise questions and interact with them. This is a technical course, aimed at programmers, system designers, and architects who want a solid understanding of the Microsoft Windows Azure platform, hence a prerequisite for this course is at least six months programming in the .NET framework and Visual Studio. Check out the full details of the event or go straight to registration.   The course outline is: Week 1 - Windows Azure Platform Week 2 - Windows Azure Storage Week 3 - Windows Azure Deep Dive and Codename "Dallas" Week 4 - SQL Azure Week 5 - Windows Azure Platform AppFabric Access Control Week 6 - Windows Azure Platform AppFabric Service Bus If you have any questions about the course and its suitability, please email [email protected].

    Read the article

  • Best way to let users choose country/language when submiting an URL to a directory

    - by Claudiu
    I want to offer the user the possibility to add the country/language for websites they would submit to a fairly simple website directory. I have a folder with flags from http://www.famfamfam.com/lab/icons/flags/ . The flag images are named according to the ISO 3166-1 alpha-2 country codes, meaning that I could make a PHP script that would be able to retrieve images and the name of the country retrieved from the image name (not the full name, but it wouldn't be necessary). Just to make things clearer, I couldn't find a proper combo-box jQuery plugin for my needs (that would act exactly like the native but with an icon before the text) and don't really have the time to develop one on my own. Considering the number of images, I also wouldn't just display them all with a radio box near them. Also, having a classic drop-down list would be a nightmare for me as I would have to assign the short country name manually to each entry, or do it once for every country. Offering the user a dropdown list with the short country names but no flag near them would also be unfriendly and confusing. The idea is that every website featured in the directory would have the country flag icon near it. I have the images named properly but I don't know how to let the user choose the right image for their website. Any idees? Thank you all in advance! EDIT Temporary solution is this file: http://www.andrewpatton.com/countrylist.csv It contains a list of countries including various other info, like the short country name, the same name that's used for the flag images. I can take that information and have a classic like this: <select name="countries"> <option value="ro">Romania</option> <option value="ie">Ireland</option> <!-- and so on --> </select> Still, If anybody has a better idea...

    Read the article

  • Googlebot visit but no cache update - why?

    - by Mick
    I have made a new plain vanilla HTML website. I have been making regular modifications to it on an almost daily basis. The site is hosted by hostmonster and as part of their service they offer "awstats" to let you know assorted details of visitors to the site. One thing is puzzling me. According to awstats, a "robot/spider" calling itself "Googlebot" visited my site as recently as today (28th June 2011), but when I find my site on google (e.g. by searching for "full reserve banking") the cache is dated only the 5th June. I always thought that a visit from the google robot was synonymous with a cache update. Am I wrong? Or have I accidentally put something in the site telling google that nothing has been updated? EDIT: It seems a moderator has removed the name of my website, so there is now no chance that anyone could check out if I had made some error on my site :-( ... but anyway, in answer to paulmorriss' question, here is what aw stats was telling me:

    Read the article

  • Security Issue in LinkedIn &ndash; View any 3rd profile without a premium account.

    - by Shaurya Anand
    Originally posted on: http://geekswithblogs.net/shauryaanand/archive/2013/06/25/153230.aspxI discovered this accidently when my wife forwarded a contact on LinkedIn from her tablet, using the mobile interface of the website. On opening the contact on my desktop, I was surprised to see, I need to upgrade my account to view the contact. Doing some research along with my wife, I found this simple security vulnerability from LinkedIn that can let anyone view a contact’s full profile even when you have a “not upgraded” LinkedIn account and that the contact is a “3rd + Everyone Else”. Here’s an example of what I am talking about. I just made a random search on LinkedIn for a contact whose name starts with Sacha. Do note, this is just a walkthrough and I am not publicizing any Sacha. I check the “3rd + Everyone Else” and find a “LinkedIn Member”. On clicking this person’s profile to view, I am presented with the following page, asking me to upgrade. Make a note of this page’s web address and you get the profile id from it. For example, for this contact, the page address is: http://www.linkedin.com/profile/view?id=868XXX35 The Profile Id for this contact is 868XXX35. Now, open following page where the Profile Id is the same as the one we grabbed a moment earlier. https://touch.www.linkedin.com/?#profile/868XXX35 The mobile page exposes this contact information and you even get the possibility to connect to this person without an introduction mail (InMail). I hope someone from LinkedIn sees and issues a fix for this. I am pretty sure, it’s something that they don’t want the user to do without purchasing an upgrade package.

    Read the article

  • We've Been Busy: World Tour 2010

    - by [email protected]
    By Brian Dayton on March 11, 2010 11:17 PM Right after Oracle OpenWorld 2009 we went right into planning for our 2010 World Tour. An ambitious 90+ city tour visiting cities on every continent. The Oracle Applications Strategy Update Tour started January 19th and is in full swing right now. We've put some heavy hitters on the road. If you didn't get a chance to see Steve Miranda, Senior Vice President of Oracle Application Development in Tokyo, Anthony Lye, Senior Vice President of Oracle CRM Development in New Delhi or Sonny Singh, Senior Vice President of Oracle Industries Business Unit in Stockholm don't worry...we're not done yet. The theme, Smart Strategies: Your Roadmap to the Future is a nod to the fact that everyone needs to be smart about what's going on in their business and industry right now. But just as important---how to make sure that you're on the course to where you need to be down the road. Get the big picture and key trends in "The New Normal" of today's business climate and drill down and find out about the latest and greatest innovations in Oracle Applications. Check out http://www.oracle.com/events/applicationstour/index.html for an upcoming tour date near you. Pictures, feedback, summaries and learnings from the tour to come soon.

    Read the article

  • Blogging from Office RT

    - by Dennis Vroegop
    During the last Build conference all attendees were given a brand new sparkling exciting Surface RT device (I love that machine despite its name but that's beside the point). On it came a version of Office 2013 RT, or better: the preview version. Now, I translated that term "Preview" to "Beta". Which is OK, since I've been using a lot of beta products from Microsoft and they all were great. And then I wanted to post a blogposting from Word. I knew I could, I have been doing this for a long time (I prefer Live Writer but that isn't available on Windows 8 RT). So I wrote the entry and hit "Publish". Instead of my blogsite I got a nice non-descriptive error telling me I couldn't post. So I fired up my other (Intel based) Win8 tablet, opened Word RT Preview, it loaded my blogpost (you've got to love the automatic synchronization through Skydrive) and tried from that machine. Same error. So, I installed Live Writer (remember, the other machine is Intel based) and posted from there. That worked like a charm. Apparently, there was something wrong with Word. I gave up and didn't think about it anymore. Yet… what you're reading now is written in Word 2013 RT on my Surface RT. So what did do? Simple: I updated from the Preview version to the final version. That's all there was to it. So…. If you're still on the preview I urge you to upgrade. You need to go to the "classic desktop update" window instead of going through the Windows Store App style update since Office is a desktop system, but once you do that you'll have the full version as well. Happy blogging!

    Read the article

  • ESXi boot time with 9 iSCSI targets

    - by Myles Gray
    Our ESXi hosts have always been slow booting when it came to iscsi_vmk loaded successfully - sitting here for almost 5 minutes. In all a full server reboot takes almost 12 minutes. We have 9 iSCSI targets per host (5 SANs with redundant interfaces) configured as dynamic discovery targets. Has anyone experienced this? Can it be remedied with static discovery mode? Are there any debug steps we can work through to help diagnose this? (All our targets are accessible at boot so i'm assuming the host isn't stuck retrying to connect to a target)

    Read the article

  • Understanding Service Compensation part of Industrial SOA series

    - by JuergenKress
    Some of the most important SOA design patterns that we have successfully applied in projects will be described in this article. These include the Compensation pattern and the UI mediator pattern, the Common Data Format pattern and the Data Access pattern. All of these patterns are included in Thomas Erl's book, "SOA Design Patterns", and are presented here in detail, together with our practical experiences. We begin our "best of" SOA pattern collection with the Compensation pattern. Compensation is required in error situations in an SOA, as multiple atomic service operations cannot generally be linked with classic transactions this would violate the principle of loose coupling. An error situation of this sort will occur, particularly if service operations are combined into processes or new services during orchestration or by applying the Composite pattern, and the transaction bracket has to be expanded as a result. We need mechanisms to undo the effects of individual services (the status changes in the overall system) and to ensure that a consistent system state is maintained at all times, so as to preserve system integrity. For the Compensation pattern, we would like to address the following questions: Why is compensation important in relation to SOA? How is the topic of compensation linked with the topic of transactions? What are the challenges with regard to compensation... Read the full article in the Service Technology Magazine or at OTN. Share your comments and feedback on the Industrial SOA series by using the hashtag #industrialsoa. Missed an article of the Industrial SOA series visit the overview at OTN. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: Industrial SOA,SOA,SOA Service Compensation,Community,Oracle SOA,Oracle BPM,OPN,Jürgen Kress

    Read the article

  • dell vostro 1000 broadcom wireless connection

    - by lorrenuy
    I have a problem with the hardware broadcom wifi. I press the hotkey fn+f2 to activate the hardware and this will not work. I'll look at the drivers but it appears to be installed. How can I solve this problem? Ubuntu is all new to me so if possible, give me a clear explanation. Now do I connect the lan cable. I use the Ubuntu 11.10 lawrence@lawrence-Vostro-1000:~$ sudo lshw -class network [sudo] password for lawrence: PCI (sysfs) *-network description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth1 version: 02 serial: 00:1c:23:a2:b9:a9 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.1.18 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff lawrence@lawrence-Vostro-1000:~$ lawrence@lawrence-Vostro-1000:~$ rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

    Read the article

  • IIS exclude specific host?

    - by chakrit
    I have an IIS server running several websites. It is stationed behind an ISA server of which I do not have access. But I do have all of the defined websites (on port 80) routed to my server. So I want to take down one website, say it's foo.bar.com and in its place setup a LAMP server instead using a VM software. It needs to run alongside all the existing websites and it should not interfere with them. I have full control over my server, but not the ISA. Is this possible? If so, how? The OS is Win Server 2003 Standard with IIS6

    Read the article

  • Iptables massive 1:1 NAT

    - by TiFFolk
    I have to connect two LANs: LAN1: 10.10.0.0/16 and LAN2: 192.168.0.0/16. I can't do simple routing, because 192.168.0.0/16 net is prohibited in LAN1, so I am thinking of using Full cone nat (1:1) to translate 192.168.x.y/16 to 10.11.x.y/16. Each translation is done by this rules: iptables -t nat -A PREROUTING -d 10.11.0.0/16 -j DNAT --to-destination 192.168.0.0/16 iptables -t nat -A POSTROUTING -s 192.168.0.0/16 -j SNAT --to-source 10.11.0.0/16 But I will have to enter 254*254*2 rules, what will, I think, result in enormous performance degradation. So, is there a way to write such one-to-one translation with minimum number of rules?

    Read the article

  • J2EE or .Net Framework [closed]

    - by Kevino
    I want to learn JAVA or C#... tell me the strength and weakness of each platforms J2EE and .Net Framework today in 2012 and which is safer for the future jobs wise? I tend to prefer Java because here (Montreal, Toronto) there is like 6 Java jobs for each C# jobs and some experienced programmers advised me to go with Java because they say JVM languages are winning in the cloud and the rise of Android can't do anything except help Java in the long run. Is that true today with the release of windows 8 soon and ios devices? On the other side 1 of these programmers told me that corporation love Asp.Net Mvc3 for intranet and web dev and that tomcat/apache java jsp adoption is slowing down compared to Asp.net and ruby on rails & html5 etc. He told me too since I have a good background in system admins & networking C# would be better for me because I'll be able to do more things in the microsoft world with powershell automation and creating my own apps for all the networking stuffs (windows server, dns,dhcp, active directory, sharepoint etc). But what if windows 8 flop java and android aren't safer in the long run? because he told me mono was a joke compared to Java/android or native objective-c on ios devices. (I plan to do a full time study of 10hr's / 15hr's a day for the next 9 months of either Java or C# that's why I ask this)

    Read the article

  • Learning Electronics & the Arduino Microcontroller

    - by Chris Williams
    Lately, I've had a growing interest in Electronics & Microcontrollers. I'm a loyal reader of Make Magazine and thoroughly enjoy seeing all the various projects in each issue, even though I rarely try to make any of them. I've been reading and watching videos about the Arduino, which is an open source Microcontroller and software project that the people at Make (and a lot of other folks) are pretty hot about. Even the prebuilt hardware is remarkably inexpensive , although there are kits available to build one from the base components. (Full disclosure: I bought my first soldering iron... EVER... just last week, so I fully acknowledge the likelihood of making some mistakes. That's why I'm not trying to do the "build it yourself" kit just yet. It's also another reason to be happy the hardware is so cheap.) There are a number of different Arduino boards available, but the two that have really piqued my interest are the Arduino UNO and the NETduino. The UNO is a very popular board, with a number of features and is under $35 which means I won't hurl myself off a bridge when I inevitably destroy it. The NETduino is very similar to the Arduino UNO and has the added advantage of being programmable with... you guessed it... C#. I'm actually ordering both boards and some miscellaneous other doodads to go with them.  There are a few good websites for this sort of thing, including www.makershed.com and www.adafruit.com. The price difference is negligible, so in my case, I'm ordering from Maker Shed (the Make Magazine people) because I want to support them. :) I've also picked up a few O'Reilly books on the subject which I am looking forward to reading & reviewing: Make: Electronics, Arduino: A Quick Start Guide and Getting Started With Arduino (all three of which arrived on my doorstep today.) This ties in with my "learn more about robotics" goals as well, since I'll need a good understanding of Electronics if I want to move past Lego Mindstorms eventually.

    Read the article

  • How soon does nginx's token bucket replenish when limiting at requests per minute?

    - by Michael Gorsuch
    Hi all. We've decided that we want to experiment and limit requests per minute instead of requests per second on our sites. However, I am confused by the burst parameter in this context. I am under the impression that when you use the 'nodelay' flag, the rate limiting facility acts like a token bucket instead of a leaky bucket. That being the case, the bucket size is equal to the burst parameter, and every time that you violate the policy (say 1 req/s), you have to put a token in the bucket. Once the bucket is full (being equal to the burst setting), you are given a 503 error page. I am also under the impression that once a violator stops going against the policy, a token is removed from the bucket at a rate of 1 token/s allowing him to regain access to the site. Assuming that I have the above correct, my question is what happens when I start regulating access per minute? If we chose 60 requests per minute, at what rate does the token bucket replenish?

    Read the article

  • Can't get Wireless to work! (Fujitsu siemens ESPRIMO Mobile u9200) Ubuntu 12.4

    - by Martin Oscarsson
    I can't get wireless to work on my computer. I have recently installed 12.04. Computer name: (Fujitsu siemens ESPRIMO Mobile u9200) Hardware button starts bluetooth - so can't start that way. Have searched the Internet for help but can't find any on my specific problem! State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath5k State: disconnected Default: no *-network beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. HERE IS ALL THE NETWORK INFO: ellika@ellikas:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13778 errors:0 dropped:0 overruns:0 frame:0 TX packets:9510 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14022669 (14.0 MB) TX bytes:1001621 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig [sudo] password for ellika: eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13801 errors:0 dropped:0 overruns:0 frame:0 TX packets:9528 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14024965 (14.0 MB) TX bytes:1002836 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ phy0 Wireless LAN phy0: command not found ellika@ellikas:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.4-1ubuntu2 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm ellika@ellikas:~$ sudo rf-kill unblock all sudo: rf-kill: kommandot hittades inte ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sedan sudo ifconfig wlan0 sedan: command not found ellika@ellikas:~$ sudo ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:22:5f:3f:63:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ellika@ellikas:~$ ^C ellika@ellikas:~$ ^C ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" ^[[C^[[C^[[C^[[C^[[C^[[B wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.4 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.451/10.517/10.631/0.062 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux ellika@ellikas:~$ ellika@ellikas:~$ clear ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.5 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.476/10.522/10.602/0.045 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux

    Read the article

  • Search inside Xournal files (.xoj)

    - by Javad Sadeqzadeh
    I'm a big fan of Evernote, I use it regularly. However, it has a 60MB storage limit (although text files are not going to occupy much space, but the limitation concern still remains). Today, I installed Xournal, which has great features like annotating, nice background, free hand shapes and notes, save in PDF format, and many more. But the big problem is that as far as I've noticd, there is no intrinsic feature for seach inside the notes (created using Xournal with .xoj suffix). I used Catfish File Search application (which creates bash commands for full text search), but it couldn't help as well. Is there anyway to search inside a .xoj file at all? If so, it could be a suitable alternative to evernote, if you put your .xoj files on a cloud (which certainly offers you much more storage space than 60MB). If not, is there any other convenient app similar to Evernote, but with higher storage limit or without a limit? Somebody suggested Zim desktop wiki app, which looks great, but I'm nut sure if I could copy and paste everything there (a mixture of photos and tables and text with various formats and highlights), like what I do with Evernote. And a very useful tool I use is Evernote Web Clipper (browser extension). Of course, having a desktop client like Everpad is a plus, but not the absolute need. PS: I use pocket, so please do suggest that (it only preserve links (which might change over time) not the actual text). I also use google drive or docs, I don't like that for this purpose niether, it's too slow, doesn't have a browser extension and a desktop client. Thank you so much in advance.

    Read the article

  • Is the output of Eclipse's incremental java compiler used in production? Or is it simply to support Eclipse's features?

    - by Doug T.
    I'm new to Java and Eclipse. One of my most recent discoveries was how Eclipse comes shipped with its own java compiler (ejc) for doing incremental builds. Eclipse seems to by default output incrementally built class files to the projRoot/bin folder. I've noticed too that many projects come with ant files to build the project that uses the java compiler built into the system for doing the production builds. Coming from a Windows/Visual Studio world where Visual Studio is invoking the compiler for both production and debugging, I'm used to the IDE having a more intimate relationship with the command-line compiler. I'm used to the project being the make file. So my mental model is a little off. Is whats produced by Eclipse ever used in production? Or is it typically only used to support Eclipse's features (ie its intellisense/incremental building/etc)? Is it typical that for the final "release" build of a project, that ant, maven, or another tool is used to do the full build from the command line? Mostly I'm looking for the general convention in the Eclipse/Java community. I realize that there may be some outliers out there who DO use ecj in production, but is this generally frowned upon? Or is this normal/accepted practice?

    Read the article

  • Monitor not detected after booting without monitor attached (12.04)

    - by cawkie
    I had a stable 12.04 machine running perfectly. The machine was booted without the monitor connected - since then the system always boots to low graphics mode. Onboard graphics (from lspci): VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) Monitor: AOC e2450Swh Display widget shows monitor as laptop(!?) and system details shows graphics as Gallium 0.4 on llvmpipe (LLVM 0x300) X-server log appears to show correct monitor detected. When I boot from a live CD I get full 3d graphics I've tried the monitor on a different machine - all OK. I've tried a different monitor on this machine - same problem. Between having a working system and a broken one there have been no updates and I have made no configuration changes... EDIT: I have come to the conclusion that the problem is caused by a known issue with lightDM hanging on battery check. I've managed to get 3D graphic working by switching to using GDM - not a solution but acceptable workaround. I would still like to know what is causing the problem and how I managed to get my system into this state!

    Read the article

  • Can't Access a file I downloaded since I don't have permissions yet I am admin?

    - by chobo2
    Hi I downloaded some file and everytime I try to copy it or move it somewhere I get these errors Windows cannot access the specified device, path , or file. You may not have the appropriate permissions to access the item. You need permission to perform this action You require permission from "user(where this is my pc name/myusername)" to make changes to this file. Yet I am an admin and it is my only account on this computer and it saying to me I need permissions to open it up from "chobo2" user yet that's the account I am logged in as. I don't get it. How do I disable this stupid message so I can access every file I want. I am using windows 7 ultimate 64bit. As far as I know I have full permissions set so I don't know why I am getting this.

    Read the article

  • Oracle Fusion Applications User Experience White Papers by Anna M. Wichansky

    - by JuergenKress
    The Applications User Experience group has created a series of white papers to better communicate the world-class user experience features of the Oracle Fusion Applications, and to describe the process we used to design them. These papers not only explain why the Oracle Fusion Applications User Experience is designed the way it is, but also the data collection, modeling, and testing efforts of our unique, user-focused design process, which contributed to its refinement. The documents we are sharing with product announcement are: Applications User Experience Research and Design Process White Paper New Oracle Fusion Applications: An End-User Experience Designed for Productivity Why Oracle Expects Productivity Gains with Fusion Applications Closing the Deal: the Oracle Fusion Customer Relationship Management User Experience Oracle Fusion Human Capital Management: Designed for a Productive Workforce Get It Done Fast, Get It Done Right: The Oracle Fusion Financials User Experience Oracle Fusion Applications User Experience Design Patterns: Productivity Realized Oracle Fusion Procurement: Changing the Way You Buy and Sell Putting the User into Oracle Fusion Applications User Assistance Read the full article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: User Experience,Design patterns,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Can't add printer on Windows XP

    - by SuperFurryToad
    I've added a HP 4250 printer to about half a dozen Windows XP PCs in our office without any problems whatsoever, but for some reason I haven't been able to add it to one particular PC today. I go through the Add Printer wizard to add a local printer attached to the PC, enter the new port number as a Standard TCP/IP Port, install the driver. At the end of the wizard I get the following error message: Full error message: "windows cannot connect to the printer. either the printer name was typed incorrectly, or the specified printer has lost its connection to the server." This doesn't make any sense as I am able to ping the printer from the PC. The print spooler is running, and any firewall software on the local PC is switched off.

    Read the article

  • How can I prevent seams from showing up on objects using lower mipmap levels?

    - by Shivan Dragon
    Disclaimer: kindly right click on the images and open them separately so that they're at full size, as there are fine details which don't show up otherwise. Thank you. I made a simple Blender model, it's a cylinder with the top cap removed: I've exported the UVs: Then imported them into Photoshop, and painted the inner area in yellow and the outer area in red. I made sure I cover well the UV lines: I then save the image and load it as texture on the model in Blender. Actually, I just reload it as the image where the UVs are exported, and change the viewport view mode to textured. When I look at the mesh up-close, there's yellow everywhere, everything seems fine: However, if I start zooming out, I start seeing red (literally and metaphorically) where the texture edges are: And the more I zoom, the more I see it: Same thing happends in Unity, though the effect seems less pronounced. Up close is fine and yellow: Zoom out and you see red at the seams: Now, obviously, for this simple example a workaround is to spread the yellow well outside the UV margins, and its fine from all distances. However this is an issue when you try making a complex texture that should tile seamlessly at the edges. In this situation I either make a few lines of pixels overlap (in which case it looks bad from upclose and ok from far away), or I leave them seamless and then I have those seams when seeing it from far away. So my question is, is there something I'm missing, or some extra thing I must do to have my texture look seamless from all distances?

    Read the article

< Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >