Search Results

Search found 9617 results on 385 pages for 'fresh dev'.

Page 266/385 | < Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >

• port redirection on solaris 11

  - by mo3lyana

  I'm trying port forwarding on solaris 11. I have a mechine behind a server that use solaris 11. I try to access that mechine from the external port, and forwarded by solaris 11 mechine to that machine using the ip filter. I give ipnat.conf configuration like this: rdr net0 0.0.0.0/0 port 1428 -> 10.1.18.178 port 22 but the response appeared when I tried to remote is connection time out, but if I redirect to a solaris 11 machine itself, the configuration is running well. I've enabled IP forwarding on the system root@solaris11:/etc/ipf# ndd -get /dev/ip ip_forwarding 1 root@solaris11:/etc/ipf# routeadm Configuration Current Current Option Configuration System State --------------------------------------------------------------- IPv4 routing enabled enabled IPv6 routing disabled disabled IPv4 forwarding enabled enabled IPv6 forwarding disabled disabled root@solaris11:/etc/ipf# ipadm show-prop PROTO PROPERTY PERM CURRENT PERSISTENT DEFAULT POSSIBLE ipv4 forwarding rw on on off on,off is there any configuration that I missed?

  Read the article

• Gentoo on Mac Mini - can't get framebuffer to work

  - by user42055

  I have the latest Gentoo on an intel mac mini with 945G graphics. I'm trying to start X (with no config) but it complains that /dev/fb0 doesn't exist. I've tried adding the following options to the kernel boot params: video=intelfb:mode=800x600-32@60,accel,hwcursor vga=761 Because I read that the fb might not be enabled unless you set a vga= option. Unfortunately the kernel doesn't recognise that option. If I changed it to vga=ask it presents me a list of about 6 text modes no greater than 80x60. In the kernel I have agpgart, drm (using i830 module) and vga text console compiled in. What am I not doing right ?

  Read the article

• Gentoo on Mac Mini - can't get framebuffer to work

  - by user42055

  I have the last Gentoo on an intel mac mini with 945G graphics. I'm trying to start X (with no config) but it complains that /dev/fb0 doesn't exist. I've tried adding the following options to the kernel boot params: video=intelfb:mode=800x600-32@60,accel,hwcursor vga=761 Because I read that the fb might not be enabled unless you set a vga= option. Unfortunately the kernel doesn't recognise that option. If I changed it to vga=ask it presents me a list of about 6 text modes no greater than 80x60. In the kernel I have agpgart, drm (using i830 module) and vga text console compiled in. What am I not doing right ?

  Read the article

• Better Performance with Laptop i5+SSD or i7+HDD [closed]

  - by Cas Sakal

  Possible Duplicates: i5 vs. i7 processor dev laptop Developer Notebook i5 or i7 I could not decide on which configuration below gives better performance for developers on a notebook(running VS.NET, SQL Server, no gaming); (A) i5 540M + SSD (Intel) or (B) i7 720M + 7200 RPM HDD (Western Digital) Since these two configurations(A, B) costs nearly same $ for me, I would like to buy the fastest one for my job environment. Please do not comment just buy this or that, if you can give an inference about your choice I would be appreciated. Thank you, cas

  Read the article

• how to record mic input and pipe the output to another program

  - by acrs

  Hi everyone Im trying to follow a tutorial on generating truly random bits How To Generate Truly Random Bits This is the command from the tutorial but it does not work rec -c 1 -d /dev/dsp -r 8000 -t wav -s w - | ./noise-filter >bits I know i can record my mic input using rec -c 1 no.wav this is the command i tried using rec -c 1 -r 8000 -t wav -s noise.wav | ./noise-filter >bits but i get root@xxc:~/cc# rec -c 1 -r 8000 -t wav -s noise.wav - | ./noise-filter >bits rec WARN formats: can't set sample rate 8000; using 48000 rec FAIL sox: Input files must have the same sample-rate I have complied noise-filter noise-filter I think the tutorial is using an older version of SOX and REC I'm using sox: SoX v14.3.2 on Ubuntu 12.04 server Can someone please help me ?

  Read the article

• Why do I have no TTY on a basic Ubuntu 9.10 server install?

  - by pr1001

  I have reinstalled Ubuntu 9.10 Server several times on a bog standard 1RU server and each time I finish the install and reboot I see GRUB run and am then presented with a black screen. The machine is running just fine, as I am able to SSH in, but I can't see anything on the attached monitor. I have a simple LCD screen connected via VGA and a signal is apparently being output to it, as it doesn't go asleep. Looking at /var/log/syslog I see: Mar 24 14:57:44 bridge5 rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] However, I later see: Mar 24 14:57:44 bridge5 kernel: [ 0.001368] console [tty0] enabled Any thoughts? Thanks!

  Read the article

• booting FreeBSD 9 from USB stick: boot error

  - by ssc

  I am trying to boot FreeBSD 9 from a USB stick that I created following the official guidelines: dd if=FreeBSD-9.0-RELEASE-i386-memstick.img of=/dev/da0 bs=64k Booting fails with a simple 'boot error'. I have used this USB stick for quite a while for the very purpose of booting / installing new OSs, but I tried a different one anyway - same problem. I have also reproduced the issue on a different machine. I've acquired to image file over torrent which AFAIK has an md5 check built in, but I downloaded it again anyway directly from a FreeBSD mirror. Same result. Does anyone have any success with this ? I did not find anything related online which seems to suggest this is not a well-known problem. Does anyone have a thought where else to search for the cause of the problem ?

  Read the article

• Migrating an Active Directory domain controller to AWS

  - by Xavier Hutchinson

  I am required to migrate a Active Directory server into AWS with a couple other servers (SQL and IIS) to create a dev and test environment for our network / development. My plan at this time is to simply rebuild the Active Directory server in AWS from scratch - which is quite time consuming indeed! I was wondering if anyone had a recommendation as to a better and more efficient approach of migrating a copy of a physical Active Directory server to the cloud? The server is Windows Server 2012. Thank you!

  Read the article

• Need help connecting to SRW2024 Linksys Switch from CentOS 5.4

  - by sxanness

  I am configured a Linksys SRW2024, I accidently changed the management VLAN before changing the VLAN configuration thus I can no longer access it with the net. The only way I have read to get into it now is via a console cable, my laptop with me is a MacBook Pro with no Serial port connection, apart from driving around a town that I am unfamilar with to find an adapter I thought I would try on a Linux box. I have a CentOS 5.4 server here (PowerEdge R300) that I am trying to use to talk to the switch. I tried minicom first but I do not see the console. Another site suggested the screen command. I tried "screen /dev/ttyS0 38400" but all I get is blinking curser, I do not see the configuration. I don't know if anyone here as any tips but I hope someone does. Thank You,

  Read the article

• Proper upstart script for hamachi?

  - by ALQ

  I've been looking for a script to supervise hamachi and mostly got it to work except for the part that daemonizes hamachid. The following script works but is not perfect. I'm not familiar with upstart internals to debug this further. description "Hamachi VPN" author "Alexis Le-Quoc <[email protected]>" start on (net-device-up and local-filesystems and runlevel [2345]) stop on runlevel [016] respawn oom never env DAEMON=/opt/logmein-hamachi/bin/hamachid pre-start script [ -x "$DAEMON" ] end script # should really be: # expect daemon # exec $DAEMON exec $DAEMON debug > /dev/null

  Read the article

• After closing the ssh terminal, the thin server is down

  - by Keating Wang

  I have a rails project run on the thin server(1.3.1) on a ubuntu server. I ssh to the server and start thin with command 'thin start -C config/thin.yml', following the thin.yml, port: 3000 log: log/thin.log timeout: 30 chdir: /home/byht/56platform/dev/tracker environment: production servers: 1 daemonize: true After thin starts successfully, I visit the project and it works well. Then, I close the terminal, I can also visit the pages that have been visited, but when I visit the pages that not been visited before closing ssh terminal, a "500" error appears on the page. I didn't find the error messages in the log file. I have tried start thin with nohup and sudo, but they are useless. I sign in the ubuntu server locally, then the problem disappears. But I need sign in the server to stat thin with ssh when I'm home.

  Read the article

• Cold Fusion 8 and 9 on IIS 6

  - by David Mesh

  I have a client, who against my better judgement has insisted on doing the following. They have a single IIS 6 on Win 2003 Server Enterprise. It currently runs ColdFusion 8. They want me to install ColdFusion 9 on the server without changing any of the existing sites so that they can develop in CF 9 and upgrade other sites in the future. Yes, I have begged them to use a Dev server, or run on apache on the same box. Can this even be done? Many thanks in advance! DM

  Read the article

• haproxy access list using path_dir having issues with firefox

  - by user11243

  I'm trying to route all requests containing a path directory of /socket.io/ to a separate port with HAProxy. Here is my config file: global maxconn 4096 # Total Max Connections. This is dependent on ulimit nbproc 2 defaults mode http frontend all 0.0.0.0:80 timeout client 86400000 default_backend web_servers acl is_stream path_dir socket.io use_backend stream_servers if is_stream backend web_servers balance roundrobin option forwardfor # This sets X-Forwarded-For timeout server 30000 timeout connect 4000 server web1 127.0.0.1:4000 weight 1 maxconn 1024 check backend stream_servers balance roundrobin option forwardfor # This sets X-Forwarded-For timeout queue 5000 timeout server 86400000 timeout connect 86400000 server stream1 127.0.0.1:5100 weight 1 maxconn 1024 check URL paths with a /socket.io/ get correctly directed to port 5100 in chrome and safari. However not for firefox. I'm running Haproxy locally on my mac for dev, not sure if it has anything to do with it. I'm using haproxy 1.4.8 and Firefox 3.6.15. I've tried clearing cache on firefox and it didn't help, so I'm thinking there's something wrong with the way HAProxy parses through the Firefox request headers.

  Read the article

• f12 and ctrl + f5 not working correctly

  - by ComatoseDuck

  When I came back to my work computer after being away for a week I found out when I try to clear the cache and refresh the page via ctrl + f5 (or just f5) I get the prompt "Type the Internet address of a document, and Internet Explorer will open it for you" with a drop down list in IE. When I try f5 in Chrome and FF it opens the "Open file" dialog box. When I try to f12 for Dev tools in IE, Chrome & FF it opens up the print dialog box. Why is this happening and what can I do to revert it back to the way it was?

  Read the article

• Adding unallocated partition to Ubuntu in VMware

  - by AMS949

  I've installed Ubuntu 9.10 on a Windows XP using vmware. As most do, I initially setup the size of the virtual drive to 8GB and soon realized I need more. I used the VMware utility to expand the virtual drive and added another 4GB, which I can see using GParted. Now my dilemma is how can I "merge" the newly created space to my original? I need to add the unallocated space. I tried before and after formatting the new space but still whenever I try to resize/move /dev/sda1 it looks like it is using its maximum capacity. Also, GParted is being used from the GParted live CD not from the Linux live CD.

  Read the article

• SOLR high CPU usage in amazon EC2

  - by user644745

  I installed solr-3.6 in my local windows box and it worked fine. I installed solr-4.0 in amazon ec2 linux large instance and the cpu usage shot upto 100%. It maintained at 80-90% average cpu power. I thought it could be because of 4.0, So I installed 3.6 in EC2 again. But again the CPU usage was 80-90% average. With both the versions, solr works in EC2. dont know why CPU usage is so high. i started the solr server using "sudo nohup java -jar start.jar &" In my local box java 1.7 is installed and in EC2 it is 1.6.0_24. I have mapped solr dir to an EBS volume. /dev/mapper/vg1-solr 8361916 1935928 6342128 24% /home/ec2-user/SOLR/solr/example/solr Is there any known issue ?

  Read the article

• OpenVPN Setup - Service Won't Start

  - by Lenwood

  I'm in the process of setting up OpenVPN on a VPS running Debian 6. I've walked step-by-step through this guide twice now, and I can't get the service to start. When I start the service, the error reported in the log file is: Cannot ioctl TUNSETIFF tun: Inappropriate ioctl for device (errno=25) I've searched the web a few times and I'm not finding anything helpful. I've tried: Changing file permissions: no change Deleting the file: get an error stating no file found (errno=2) Making a folder named "tun": get an error stating no file found (errno=2) I've wiped my installation and completed the steps verbatim twice now. I get no errors along the way, just the error above within my log file. The contents of my server.conf file are listed below, minus all the comments for brevity. Can anyone help? port 1194 proto udp dev tun ca ca.crt cert myserver.crt key myserver.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log log openvpn.log verb 3

  Read the article

• How to repair unbootable Fedora install

  - by Cerin

  How do you repair/reinstall Fedora without deleting any existing partitions or data? I was attempting to upgrade some old Fedora 13 servers to 17, following the instructions in the wiki. After the 14-15 upgrade, rebooting resulted in the output: Dropping to debug shell. sh: can't access tty; job control turned off dracut:/# Running dmesg also shows: dracut Warning: No root device "block:/dev/mapper/VolGroup-lv_root" found Googling shows this error is typically related to some weird RAID issues, but my server is a virtual machine not using any RAID. Using a rescue CD, I can chroot /mnt/sysimage, and all packages and data still seems to be there. How do I make the system bootable again?

  Read the article

• Subversion for web designer: repository on a network share and ftp to the live server?

  - by ceatus

  My configuration: htdocs on a windows network share (z:) web developers check out with dreamweaver modify and check in back to the drive z LAMP running on a Ubuntu server virtualized on Hyper-V with apache that point on the z drive for dev in order to test the websites Upload by FTP on the live server Now: I need multiple access to the repository, keep them on a network shares and we manage about 200 websites. All the web developers, administrators and IT need to access to the share. I found out that creating a svn server is the best way for me, so I created it on a Ubuntu Server which is virtualized on Hyper-V. Right now I have the repos local on the Ubuntu Server but I'd like them on my network drive and I'd like to have a post-commit, if possible, in order to ftp directly on my live server. Do you guys think that a WebDav solution would be better? Thanks in advance Angelo

  Read the article

• Why does a zip file appear larger than the source file especially when it is text?

  - by PeanutsMonkey

  I have a text file that is 19 bytes in size and having compressed the file using zip and 7zip, it appears to be larger. I had a read of the question on Why is a 7zipped file larger than the raw file? as well as Why doesn't ZIP Compression compress anything? but considering the file is not already compressed I would have expected further compression. Attached is a screenshot. EDIT0 I took the example further by creating a file that contained random data as follows dd if=/dev/urandom of=sample.log bs=1G count=1 and attempted to compress the file using both zip and 7zip however there were no compression gains. Why is that?

  Read the article

• Installing Image Magick on Amazon EC2

  - by Kapil Sharma

  Well I'm a PHP developer who know few linux commands to get my job done. I need to launch a symfony 1.4 website on Amazon EC2. Everything is fine except IMagick. I magick is also installed through following command: sudo yum install ImageMagick Its php lib is not installed/configured, if that do not happen with above command. In PHP, I'm using IMagick, but script is failing on IMagick. I know problem is with PHP IMagic extention but dont know how to fix that. On dev box, its as simple as turning it on on WAMP. Can someone please suggest where should I look to confirm if IMagick PHP extention installed and configured correctly?

  Read the article

• Ubuntu server hangs on reboot "could not stat resume device file"

  - by matnagel

  Instead of booting into the running system this machine stops and on the terminal I can see a message: could not stat resume device file /dev/sdb5 When I attach a keyboard and press enter the boot continues and the machine comes up like normal. But it's essential that this machine comes up under most circumstancs alone. There never was something like a "resume" on this machine. I tried several times to reboot, but this does not happen on all boots, I can not find a pattern here. There is a software raid running on the box. This is the syslog during boot: http://privatepaste.com/ff0fd0a51c/sdabfjahfgasjkgfu4gfsdzjcgfafasdjfhgasdcjfgauzfgafasgdufzg How can I get rid of this boot failure? We do not need resumes and best would be something that works here and now.

  Read the article

• how to install Mysql & tomcat on mac os x 10.5.8

  - by Divya Jyothi

  Hi can some one provide me how to install both om my mac osx 10.5.8 Hi can some one provide me how to install both om my mac osx 10.5.8 Ok this what I have done Downloaded MySQL version 5.5.22.dmg for Mac OS X 10.5 (x86, 64-bit) from http://dev.mysql.com/downloads/mysql/ Installed three files from it after mounting.... 1.MySQL -version.pkg installed it by double clicking on it 2.mysqlstartupitem.pkg installed it 3. MySql.prefpane - after installing it says it doesn't work on intel based Mac After that I have no idea whati need to start Regarding tomcat JAVA_HOME WAS the problem;(

  Read the article

• phpbb behind a reverse proxy

  - by asciitaxi

  Hi, i've got a django app running on apache behind an nginx reverse proxy. Nginx takes requests on port 80 and forwards them to apache on 127.0.0.1:81. This works fine. Now I want to run phpbb on apache under /forums. My problem is that when phpbb does a redirect, it seems to redirect to the internal apache port, rather than port 80. So, for instance when I first go to http://my-dev-server/forums to configure php bb, it immediately redirects to http://127.0.0.1:81/forums/install/index.php. Is there something I need to do in nginx/apache/phpbb config to get it to redirect to the external port? Thanks very much!

  Read the article

• Moving a Drupal between linux servers, best practice to avoid file-ownership problems

  - by zero

  I want to port over a Drupal commons 6x24 from a local LAMP-stack to a production webserver. Both systems run OpenSuse Linux. How do I do this, what are the most important steps. How should I handle file-ownership. It's important for me to have to have full control of the file ownership. If I use the wwwrun account, I frequently run into problems, due to a very strict webserver-admin. See for example the long history of looking for fixes and solutions see this thread and even more interesting see this very long and impressive thread here. All troubles I run into have to do with file-owernship and permissions. This is my current setup; Note: This was just a quick hacked installation - quick and dirty. Well my interest is after the general options i have in the port of a drupal from linux to linux linux-vi17:/srv/www/htdocs/com624 # ls -l insgesamt 224 -rwxrwxrwx 1 root www 45285 19. Jan 00:54 CHANGELOG.txt -rwxrwxrwx 1 root www 925 19. Jan 00:54 COPYRIGHT.txt -rwxrwxrwx 1 root www 206 19. Jan 00:54 cron.php drwxrwxrwx 2 root www 4096 19. Jan 00:54 includes -rwxrwxrwx 1 root www 923 19. Jan 00:54 index.php -rwxrwxrwx 1 root www 1244 19. Jan 00:54 INSTALL.mysql.txt -rwxrwxrwx 1 root www 1011 19. Jan 00:54 INSTALL.pgsql.txt -rwxrwxrwx 1 root www 47073 19. Jan 00:54 install.php -rwxrwxrwx 1 root www 15572 19. Jan 00:54 INSTALL.txt -rwxrwxrwx 1 root www 14940 19. Jan 00:54 LICENSE.txt -rwxrwxrwx 1 root www 1858 19. Jan 00:54 MAINTAINERS.txt drwxrwxrwx 3 root www 4096 19. Jan 00:54 misc drwxrwxrwx 35 root www 4096 19. Jan 00:54 modules drwxrwxrwx 4 root www 4096 19. Jan 00:54 profiles -rwxrwxrwx 1 root www 1470 19. Jan 00:54 robots.txt drwxrwxrwx 2 root www 4096 19. Jan 00:54 scripts drwxrwxrwx 4 root www 4096 19. Jan 00:54 sites drwxrwxrwx 7 root www 4096 19. Jan 00:54 themes -rwxrwxrwx 1 root www 26250 19. Jan 00:54 update.php -rwxrwxrwx 1 root www 4864 19. Jan 00:54 UPGRADE.txt -rwxrwxrwx 1 root www 294 19. Jan 00:54 xmlrpc.php linux-vi17:/srv/www/htdocs/com624 # thx to BetaRides answer here a quick overview on the drush functionality with rsync http://drush.ws/ core-rsync Rsync the Drupal tree to/from another server using ssh. Examples: drush rsync @dev @stage Rsync Drupal root from dev to stage (one of which must be local). drush rsync ./ @stage:%files/img Rsync all files in the current directory to the 'img' directory in the file storage folder on stage. Arguments: source May be rsync path or site alias. See rsync documentation and example.aliases.drushrc.php. destination May be rsync path or site alias. See rsync documentation and example.aliases.drushrc.php. Options: --mode The unary flags to pass to rsync; --mode=rultz implies rsync -rultz. Default is -az. --RSYNC-FLAG Most rsync flags passed to drush sync will be passed on to rsync. See rsync documentation. --exclude-conf Excludes settings.php from being rsynced. Default. --include-conf Allow settings.php to be rsynced --exclude-files Exclude the files directory. --exclude-sites Exclude all directories in "sites/" except for "sites/all". --exclude-other-sites Exclude all directories in "sites/" except for "sites/all" and the site directory for the site being synced. Note: if the site directory is different between the source and destination, use --exclude-sites followed by "drush rsync @from:%site @to:%site" --exclude-paths List of paths to exclude, seperated by : (Unix-based systems) or ; (Windows). --include-paths List of paths to include, seperated by : (Unix-based systems) or ; (Windows). Topics: docs-aliases Site aliases overview with examples Aliases: rsync

  Read the article

< Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >