Search Results

Search found 9989 results on 400 pages for 'grails controller'.

Page 266/400 | < Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >

• SSD on Vmware ESXI 4 (TRIM? Good Idea?)

  - by nextgenneo

  Hi, I just posted about finding bottle necks and have narrowed it down to having way too many VMs on my machine on one 15K SAS drive. I have plenty of cores and plenty of ram. So I am planning on putting 6 VMs on one drive (so 5 drives for 30 VMs). I am thinking of using a 60GB Vertex 2 SSD. Each of my VMs will only need about 6GB of HDD space so this isn't a big deal. My questions are: does ESXI support Trim and do I really need it if I leave 25% of the drive as free space? If I need it should I get a diff drive that handles garbage collection differently? I have a RAID controller w/ write caching. I will still benefit from this? Will this effect my setup differently? Is there anything I need to consider regarding SSD's in virtualized environments. Thanks for any and all help!

  Read the article

• Server 2012r2 VPN DNS

  - by Tyron Gower

  Have an issue where onsite clients cannot resolve VPNusers. but VPN users can resolve onsite machines. example. USER! uses LAPTOP1 USER1 connects to VPN gets internal IP address of 10.243.0.200 USER1 pings SERVER1 - resolve to ip and gets reply USER1 RDP into SERVER1 (inside VPN) USER1 pings LAPTOP1 from SERVER1 resolves to ip address last assigned by DHCP (10.243.0.139) ping fails USER1 pings 10.243.0.200 from SERVER1 gets reply. Running Server 2012r2 It is a domain controller, DNS and VPN server. VPN is just configured with basic default settings. All VPN users have static IP setup in AD. Not sure where to go from here.

  Read the article

• spontaneous hard disk password

  - by sc

  I had an HP proliant server go down recently. All of the sudden the sas controller (e200i) would not see any of the physical disks. New disks were detected just fine. I thought it was odd that all 6 disks would go down at one time so sent them to a data recovery firm to find out what happened. I'm being told that, somehow, all of the disks were spontaneously password protected. These are Hitachi 2.5" drives and I guess this is something of a known issue. The company has worked for a while to try and recover them, with no luck. Has anyone had experience with this? Any recommendations for how to recover the drives or a company that might have the expertise to do so?

  Read the article

• After a period of time, nslookup still works, but pinging, and an auto-refeshed website, fails.

  - by Mark Hurd

  Contrary to this SO question this is for a dotted name (gw.localnet.au), and it doesn't happen straight away. Only after some period of time (quite a long time, possibly days). In fact this is for my ADSL router and its internal IP address which I have named within the router itself and in my Windows Server 2003 Domain Controller DNS Service. Specifically, localnet.au is a Active-Directory-backed primary domain. In fact, an ipconfig /flushdns may fix the problem, but only after a while (about the time it took me to type in this question :-) ). That doesn't explain the root cause though... Manually transferred from stackoverflow.com

  Read the article

• Defrag/TRIM settings for hybrid hard drive?

  - by Joel Coehoorn

  I recently acquired a momentus XT hybrid hard drive. This is a tradition spinning HDD with a small SSD portion for frequently used files. Normally, you are not supposed to defrag SSDs, as it does not help performance and can significantly reduce the life of the drive. But you do need to defrag an HDD to keep good performance. So where does that leave us for hybrid drives? Do I need to turn off defragging in Windows to preserve the SSD portion? Is the on-disk controller smart enough to handle defragging correctly? Is there some utility I need to set it up that I missed? Additionally, for SSDs you normally want to check for and enable TRIM support... but this makes no sense for a HDDs. Where does that leave us for hybrid drives? Should I try to enable TRIM or not?

  Read the article

• Group policies - WSUS

  - by cory

  Hello, I am really lost as to what is the reason as to why my group policy is not working on my domain. I have setup a GPO for my wsus server to a specific OU in my domain. It seems as of right now, none of my machines have inherited that GPO. I have manually put it in quite a few computers. Most of my computers in the domain are linked up to my wsus server, but all my desired settings are not there. If I run gpresult /R, On one computer I ran this on, it is linking to my backup domain controller and not my main. On another computer I checked this on, it is linking to my main DC, but it did no inherit the GPO. When looking on my DC on gpmc - I see the policy is forced to the OU as #1 precedence. Thank for any help.

  Read the article

• Benefits of a RAID BBU in addition to a double UPS + PS system

  - by Wikser

  Today I roughly measured the benefits of enabling write-back on the RAID controller on a server at work. It got no RAID battery-backup-unit (BBU) so the write-cache is currently disabled. As the server is not used to capacity (by far), the results in most test were spectacular, e.g.: Database CRUD: before 35s, after 4s Saving a 1MB Excel file: before: 20s (!), after: 0.5s Of course having a BBU is always recommended, but what are the main benefits of installing a BBU to a system, which got redundant power supplies and is attached to UPSs? Does this depend on the type of the system (database, file, terminal)? What is a realistic fail scenario which could be prevented by a BBU? Thanks in advance!

  Read the article

• large RAID 10 vs small RAID1

  - by user116399

  The machine will store and serve millions of small files (<15Kb each), and all those files require a total storage space of 400G Considering the exact same SATA hard drives maker and models, on the exact same environment (OS, cpu, ram, raid controller, etc...) which one of the setups bellow would be faster? A) RAID 1 with 2 drives of 2T each, making up total storage of 2T B) RAID 10 with 4 drives of 2T each, making up total storage of 4T [EDIT]: I'm aware RAID10 is faster than RAID1. The larger the disk, at least in theory, the longer will take to do seeks/writes. So, will the performance gain of RAID10 will be outweighed by the "drag" caused the larger disk area when seek/write operations happened?

  Read the article

• What are the recognized ways to increase the size of the RAID array online/offline?

  - by user149509

  Is it possible, in theory, increase the size of the RAID-array of any level just by adding new drive(s)? Variant like "backup whole data - delete old array - add/replace disks - create new array - restore data" is obvious so what are the other options? Does it depend on the RAID-level only or on the implementation of RAID-controller only, or on both? Adding new disks to a striped array necessarily leads to a rebuilding of the array with the redistribution of the strips to the new drives? What steps should be done to increase size of RAID-array in online/offline scenarios? Especially interesting RAID-5 and RAID-10. I would like to see the big picture.

  Read the article

• Most efficient RAID configuration with 6 disks?

  - by Bob King

  I have a hand-me-down server that I'm setting up at home and it's got 6 72Gb hard disks (as well as 2 18Gb drives that I'm using for the OS). What is the best way to configure those 6 drives? Should I RAID 5 or 6, or go with something simpler, like mirroring? I'm planning to use it to hold a source control repository, and possibly data for a development SQL server. The machine has a hardware raid controller. It is an old IBM server.

  Read the article

• ldap samba user access issue

  - by ancillary

  I have a samba share that is on the LAN. It is auth'd via ldap. Users access file system via ad windows shares. There are shortcuts in directories that point to dir's on samba. Typically a user will click the shortcut to the smb dir, and will be met with a permission denied error. Upon closing explorer and reopening, it will work. DNS is handled by the domain controller, and that is the only server any of the machines use for DNS. Nothing in eventvwr. Only see successful auth entries in samba log. Any ideas?

  Read the article

• How to add a VM Server to a VM Domain when the host is not on that domain.

  - by Charlie

  I have created A VM running Windows Server 2008 R2, using VMWare. I have configured this as a domain controller running a Windows Server 2008 domain. I have also created another VM running Windows Server 2008 R2. The HOST machine is using Windows 7 Professional 64 bit. When I try to add the second VM into the domain that the first is the DC for it fails as the VM cannot contact the DC. Simple question really. What have I missed? Is it something to do with the configuration on the Host machine? What do I need to do to enable this scenario? Thanks

  Read the article

• HP DL380 G5 Predictive failure of a new drive

  - by CharlieJ

  Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure. We have an HP DL380 G5 server with two 72GB 15k SAS drives configured in RAID1. A couple weeks ago, the server reported a drive failure on Drive 1. We replaced the drive with a brand new HDD -- same spares number. A few days ago, the server started reporting a predictive drive failure on the new drive, in the same bay. Is it likely the new drive is bad... or more likely we have a bay failure problem? This is a production server, so any advice would be appreciated. I have another spare drive, so I can hot swap it if this is a fluke and new drive is just bad. THANKS! CharlieJ

  Read the article

• Removing integrated video card drivers broke other hardware?

  - by jsnlxndrlv

  I just purchased and installed an XFX ATI Radeon HD 4650 video card. The installation instructions said to remove the old video card drivers before installing the new driver. I did both things, but now every time I start my computer, the Found New Hardware wizard pops up for the following three devices: PCI Device SM Bus Controller Other PCI Bridge Device Furthermore, my LAN port no longer functions. The cable's connected, and the light on the port comes on, but the computer can't find any servers when I attempt to connect with it. The modem and router are working, and obviously I'm able to use the other computer here to post this. What do I do to fix this?

  Read the article

• Only 5 simultaneously users with PPTP VPN?

  - by Plastkort

  we have a windows 2008 R2 standard server which job is to accept incoming VPN connections via PPTP. it seems to work fine, but the moment the 6th user try to connect, we get the following error: ERROR_VPN_DISCONNECT 807 The network connection between your computer and the VPN server was interrupted. This can be caused by a problem in the VPN transmission and is commonly the result of internet latency or simply that your VPN server has reached capacity. where do we find out how to increase the amount of simultaneously users?, I read somewhere that we can have over 100 connected clients at the same time, when I created this server, I did the following : Network & sharing - Network adapters - File - new incoming connections now I tried to choose and create users here, but we have a domain controller which seems to override this, so the domain users works after this I was able to connect atleast 5 clients... how and where do I increase the "capacity"?

  Read the article

• Server service fails to start, event 7023, error 1079

  - by toffitomek

  Hello, Environment: Windows Server 2008 R2 fully patched, working as Domain Controller in Win 2003 native domain. Users started to report problems with share, it turned out that server service won't start. I've scrambled google but can't find a thing. Any ideas will be appreciated. Thanks in advance :) Service fails to start, then when starting service I get: Windows could not start the Server service on SERVERNAME. Error 1079: The account specified for this service is different from the account specified for other services running in the same process. In System Event Log: Event 7023 The Server service terminated with the following error: The account used is a server trust account. Use your global user account or local user account to access this server.

  Read the article

• Games + Closed Lid = Hibernation

  - by Isaac Rabinovitch

  I have an ASUS N53S that I mainly bought for its RAM capacity. (I run a lot of VMs.) But as a bonus, it came with a fancy ATI video card. So I decided to install GTA 4 and plug it into a big monitor and settle down for some casual mayhem. But after about 5 minutes, it goes into hibernation! What gives? Since I was using an external monitor and didn't need the keyboard (using an XBox controller) I closed the lid on the laptop. Gaming is compute-intensive, so my GPU and CPU were both working hard and generating heat. Closing the lid interfered with cooling. Since I have the laptop configured to hibernate when I press the power button, the heat-triggered shutdown caused hibernation.

  Read the article

• When XP is asleep for a long time LAN reports code 43, gives up the ghost.

  - by seeanimal

  This one's got me stumped. Whenever the system is asleep for a long time, e.g overnight, the LAN driver reports error code 43 ("a problem") and turns itself off. This has being going on for months, but I never caught the problem until now. The owner merely shuttles back to a restore point I set her when the machine worked. Previously (without knowing exactly what was happening) I have tried everything to resolve this. Manually resetting the TCP/IP, fiddling with the driver Wake From LAN settings, DIFFERENT drivers, etc. etc. The solution is easy, uninstalling and reinstalling the driver. Understandably, though, the user is uncomfortable with this operation and the problem persists. What's causing it and how to stop it recurring? Any ideas? Thanks in advance to this great community. XP home SP3, Marvell Yukon 88E8056 PCI-E Gigabit Ethrnet Controller, version 10.22.7.3 (yk51x86.sys)

  Read the article

• Where does Exchange 2010 store the STM file, does it even still use it?

  - by RichieACC

  Our domain controller died, with no hope of recovering anything. The AD backup died with it. Due to no longer having a DC, our Exchange is unable to start. I'm trying to use "Kernel for Exchange Server" to recover the mails that are in the mailbox store. I've found the .edb file, but the .stm file is nowhere on the machine. Does Exchange 2010 still use the .edb & .stm files, or is there a new store format? If not, where will the .stm file be hiding?

  Read the article

• Installing linux on computer with Marvell adapter

  - by Seth

  I recently reinstalled my computer and decided that I want to have a native installation of linux side by side with windows (got tired of VMWare). The thing is upon installation (debian) everything goes fine until the disc detection section - linux can't find my western digital 1TB drive (IDE mode). I don't have the installation disc with me now, but I think that when i changed the mode to AHCI everything worked, though Windows couldn't boot so this is not an option. I have a Marvell 91xx controller. Any ideas?

  Read the article

• Windows server 2003SP2 as LDAP replica master for Mac OSX 10.6

  - by FrancoR

  Hello there, we have a single domain controller with Windows 2003 with few child. All the users are in the main DC. We have already created a connection from AD to Mac Xserve 10.6 and can read all the users, but: 1. If the DC goes down (or the net), Mac lose all the users, so no file access, no emails, no nothing. 2. the users are in read only. Mac admin cannot reset password, change attribute and so on. What we need is a stable environment where both AD admins and LDAP admins can manage the users; if one server goes offline the users of the other server should work (email, shared folders) just fine. Thanks in advance P.S. we already tried to connect the MacOSX to Windows LDAP, instead of AD, but we're unable to do it: MacOSX requires DNS IP (gotcha), user admin and password (ok) and a root LDAP password we're unable to find any reference of it in Windows 2003.

  Read the article

• Wifi in android-x86 with virtual box [closed]

  - by Abhishek

  I am trying to run android-x86 in Virtualbox, I am using a laptop which connects to internet via WiFi. When the android starts in virtual box, it does not recognize the host wireless connection or in other words does not identify the wireless network at all. So I got a TP-Link wireless USB adapter connected to the laptop and configured wireless controller in USB for the VM. But sadly I found that the wireless is disabled as soon as the Android VM starts. I am stuck on how to let android running in Virtualbox identify my Wifi. Any guidelines or set up instructions would be greatly helpful.

  Read the article

• Conficker keeps coming back

  - by PHLiGHT

  I hadn't run into anyone who actually got this virus until recently when dealing with a new client that didn't believe in patching their systems and consquently have been hit with this pest. I was under the impression that if you have KB958644 installed and ran the latest malicious software removal tool that conficker would be squashed. I have several systems that are fully patched, MSRT has removed the virus yet the bugger keeps coming back. This has even happened to a file server and a Domain Controller. What am I missing here? They are running AVG which I used to recommend but I have been doubting it's effectiveness over the past year or so.

  Read the article

• Can't access link in network using fully qualified domain name

  - by user1033715

  I have installed windows server 2003 and configured Domain controller (domain name - xyz.com) and DNS service. for that I have configured fully qualified domain name as server.xyz.com also I have installed apache tomcat with port 8080 on that server and accessed link successfully using "http://localhost:8080", "http://ip address of server:8080", "http://server.xyz.com:8080". but its working for local machine, and when I tried to access it from another machine in same network using "http://ip address of server:8080" its worked for me. but when I tried it using fully qualified domain name i.e. "http://server.xyz.com:8080" it's giving me error, "Could not connect to server.xyz.com" Please guide me getting this setup done. I need to be able to access this link "http://ip address of server:8080" as "http://server.xyz.com:8080" outside my network Any suggestion are highly appreciated..

  Read the article

• Active Directoy GPO

  - by Phillip R.

  I am looking into some weird issues with active directory and group policy. This domain has been upgraded from windows NT and has a few different administrators over the years. I am looking through the Default Domain group policy and Default Domain Controller group policy. In the security areas and I will use the log on locally area as an example, it shows SIDes that begin with asterisks and are quite long they look sort of like the following *S-1-5-21-787626... Normally, when I see something like this I would think that the User account was no longer there and this was never cleaned up. Am I wrong in my assumption? Thanks in advance

  Read the article

< Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >