Search Results

Search found 35753 results on 1431 pages for 'app dev'.

Page 267/1431 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >

• Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubuntu Lucid

  - by MIDoubleKO

  I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

  Read the article

• Windows Setup could not configure Windows to run on this computer's hardware

  - by Hello71

  The whole installation goes smoothly up to the point of "Completing installation ...". The monitor changes resolution, after which a standard dialog box pops up saying Windows Setup could not configure Windows to run on this computer's hardware Then, in a few seconds, the whole machine powers down. Trying to restart produces the message: STOP: c000021a {Fatal System Error} 0x00000000 (0xc0000001 0x00100448) OR it boots into Setup and comes up with the message: Windows Setup encountered an unexpected error... (This is not the actual error, just paraphrasing) I tried using the OEM restore instead of a regular install, but it fails with the same error. (Even though it worked before...) General specs: HP Pavilion Elite e9262f Intel Core i5-750 Processor ATI Radeon HD 4650 Hitachi HDT721010SLA360 ATA Device 6GB DDR3 RAM SuperMulti DVD Burner with LightScribe Some built-in Wi-Fi module http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01916917 I've tried disconnecting the wireless card and disabling the built-in Ethernet and Firewire via the BIOS, and replacing the wireless keyboard and mouse with wired USB ones. Didn't work. I've also tried changing the SATA controller settings in the BIOS to RAID, AHCI, and IDE, reinstalling each time I changed. Still not working. I think the reason why it is showing the Fatal System Error is because it didn't finish installing before it errored out and shut down, so the system is left in an inconsistent state. I've tried 3 different copies (including the OEM restore) of Windows 7 now, and they're all failing at the same point, with the same error message. I've tried to install Windows 7 maybe 10 times already, with the exact same error message at the exact same location. Hm... Interestingly, the 32-bit version of Windows 7 works, but the 64-bit version doesn't. Perhaps it was a badly burned disk? Reburning the 64-bit version still comes up with the same error. Here's a picture of the side of the case that clearly says it came with Windows 7 64-bit, along with the model number and CPU. sudo fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009896f Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 7 HPFS/NTFS /dev/sda2 14 94119 755906445 7 HPFS/NTFS /dev/sda3 119922 121602 13492224 7 HPFS/NTFS /dev/sda4 94120 119922 207257740+ 5 Extended /dev/sda5 119527 119922 3170769 82 Linux swap / Solaris /dev/sda6 107174 119526 99225441 83 Linux /dev/sda7 94120 107173 104856192 7 HPFS/NTFS Partition table entries are not in disk order

  Read the article

• Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubu

  - by user37968

  I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

  Read the article

• How Can I Disable CRL Checks For A Windows 2008 App Using WinHTTP?

  - by Mike B

  I've got a Windows 2008 server with an app that uses WinHTTP for SSL sessions. The server is isolated from the internet but still tries to connect to CRL distribution points, which leads to some timeouts. Since the server has no access to the internet whatsoever, I'd like to disable CRL checks. I had a similar issue on a Windows 2003 server and resolved it by adjusting the following registry keys: HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Http/Parameters/SslBindiongInfo/0.0.0.0:443/DefaultSslCertCheckMode (DWORD=1) HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Rasman/PPP/EAP/13/NoRevocationCheck (DWORD = 1) HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Rasman/PPP/EAP/13/NoRootRevocationCheck (DWORD = 1) That doesn't seem to be working in 2008. I've also tried disabling the CRL check from IE under Tools Internet Options Advanced. Is there anything else I can try here?

  Read the article

• nginx 2 symfony2 web application, one ip no domain

  - by Krzysztof Koch

  I have irritating with nginx. I set up in /usr/share/nginx/www/firstapp one application and in /usr/share/nginx/www/secondapp. in my default conf i setup that in / root localization i want first app: when write 9.9.9.9 in browser show me first app, and when i write 9.9.9.9/makeup, there not show me seccond app. Why first app displays me good, and seccondapp cannot? Please help me. Sorry for quality here pasterbin code: enter link description here server { listen 80; server_name localhost; root /usr/share/nginx/www/firstapp/web; access_log /var/log/nginx/$host.access.log; error_log /var/log/nginx/error.log error; # strip app.php/ prefix if it is present rewrite ^/app\.php/?(.*)$ /$1 permanent; location / { root /usr/share/nginx/www/firstapp/web/; index app.php; try_files $uri @rewriteapp; } location /makeup/ { alias /usr/share/nginx/www/seccondapp/web/; index app.php; try_files $uri @rewriteapp; } location @rewriteapp { rewrite ^(.*)$ /app.php/$1 last; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ ^/(app|app_dev)\.php(/|$) { #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/lib/php5-fpm/www.sock; fastcgi_split_path_info ^(.+\.php)(/.*)$; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param HTTPS off; #fastcgi_param SERVER_PORT 80; }

  Read the article

• Routing RFC1918 addresses through dd-wrt via a switch

  - by espenfjo

  I am a bit stuck with an experiment of mine. I have a network looking somewhat like this. | Internet | | ---- |Switch| ---- | | Server w/pub IP | DD-WRT router 192.168.1.1 | | RFC1918 clients 192.168.1.0/24 What I want is for the RFC1918 clients to speak directly with each others. On the server with the public IP I have this route: 192.168.1.0/24 dev eth0 scope link and can see that packets are infact reaching the dd-wrt router for 192.168.1.1, even though if I get no answer. Trying to reach one of the RFC1918 clients from the public IP server will get no result, as the dd-wrt router is not announcing that network on to its external interface (arp who-has 192.168.1.107 tell xxx.xxx.xxx.xxx, but no answer). The router being an WLAN dd-wrt router has of course a load of routes, VLANs and interfaces: xxx.xxx.xxx.1 dev vlan2 scope link 192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.1 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.244 84.215.64.0/18 dev vlan2 proto kernel scope link src xxx.xxx.xxx.xxx 169.254.0.0/16 dev br0 proto kernel scope link src 169.254.255.1 127.0.0.0/8 dev lo scope link 0.0.0.0 via xxx.xxx.xxx.1 dev vlan2 xxx.xxx.xxx.xxx being the public IP, and xxx.xxx.xxx.1 being the default route for the public IP. I am not sure where to continue with this. I would recon that I both need routing on the dd-wrt router, as well as some iptables magic? Why do something this complex? Why not ;) Also, do not mind that "Internet" can get RFC1918 traffic, it wont go outside of the walls. EDIT 1: Following the tip from stew I do indeed get the correct ARP flowing. And adding an iptables rule for allowing traffic from that specific public IPd machine I get traffic between the systems! Oddly enough though, the speed I get from Server w/pub IP - RFC1918 clients are the same as if the traffic were routed out onto the Internet and back. Edit 2: Ok, disconnecting the external Internet connection will still give the same, crappy transfer speed. So it has to be something else. Edit 3: Ok, I guess there are other reasons for this crappy speed. Case closed. :)

  Read the article

• telnet to 3389 connects, RDP remote desktop app bails ?

  - by scott_lotus

  I can TELENT 192.168.10.10 3389 and get a connection. But RDP client to 192.168.10.10 immedietly bails (i.e less then 1 sec) "connect" button greys briefly, RDP app remains on screen. Have tried these from many nodes on the subnet to 192.168.10.10 with same result. On 192.168.10.10 Allow Remote Desktop is enabled. On 192.168.10.10 windows firemall is off. Im connecting from the same subnet i.e no firewall hardware / routers in the way. AV software is installed but other nodes on same subnet allow RDP connection using exact same AV settings (network group profile) Checked 192.168.10.10 for any additonal AV software or local firewall products. Im sure non exist. Checked regedit to ensure 3389 was the port set for listening. Seems to be an XP problem (sp3) ( 2 nodes on the my LAN have this issue) and many work fine. Thanks for any help Scott

  Read the article

• What are the benefits of running a app server in user space, like Unicorn, as opposed to as sudo?

  - by dan

  I've been using Phusion Passenger + Rails/Sinatra for a lot of projects. Passenger runs under the main Nginx or Apache process. But I'm interested in Unicorn, partly because it runs in user space. You just set up Nginx to proxy_pass requests to a unix socket that is connected to Unicorn processes that you fire up under a normal user account. Is there anything to be said as far as advantages and disadvantages of these two alternative approaches to running an web app? I mean in terms of ease of administration, stability, simplicity, etc.

  Read the article

• How do I use the Messaging app with an account different from my primary Microsoft account?

  - by Bob

  I set up this computer with a Local account. I have linked it to my 'primary' Microsoft account - which is used in the Mail and Store apps. There are no other accounts linked at this time. I wish to use the Messaging app with a different Microsoft account. However, Add an account only lets me add a Facebook account! I don't want to remove or change my primary Microsoft account, since I do not wish to use the Messaging account with any other services.

  Read the article

• Mac OS X app window is too large - how can I resize?

  - by Kyle Cronin

  I'm a MacBook user, and when I'm home I plug into a large external monitor to get additional screen space. When I'm on the go I disconnect and use my laptop's built-in display. For the most part this arrangement works very well; however, I occasionally run into an issue where I'll resize an app on the external, causing it to be too large to fit on the built-in screen when I disconnect. Most apps don't have a problem decreasing their height automatically or resizing to fit when I click the green orb, but some (like iTunes) don't want to cooperate. How can I resize apps like iTunes without reconnecting to my external? Here's a screenshot:

  Read the article

• Why does my Fedora HD come up as 124GB when it was created to be 700GB in Hyper-V?

  - by barfoon

  Any ideas? How can I tell fedora to use 700GB, and do I have reformat to do this? Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_computer-lv_root 124G 3.9G 114G 4% / /dev/sda1 194M 23M 162M 12% /boot tmpfs 995M 320K 994M 1% /dev/shm Hyper-V settings: Thank you, pvdisplay -C: PV VG Fmt Attr PSize PFree /dev/sda2 vg_mycomp lvm2 a- 127.29G 0 lvdisplay -C: LV VG Attr LSize Origin Snap% Move Log Copy% Convert lv_root vg_mycomp -wi-ao 125.36G lv_swap vg_mycomp -wi-ao 1.94G vgdisplay -C: VG #PV #LV #SN Attr VSize VFree vg_mycomp 1 2 0 wz--n- 127.29G 0

  Read the article

• batch file to deploy files

  - by Martin Michalak

  hi I have created batch file which pulls info from *.txt file and deploy code from the source to destination: SET Source=%1 if exist %Source% ( ECHO Source for WEB exists ) else ( ECHO Wrong build%Source% doesn't exist GOTO Menu ) SET Server=%2 SET AppPool=%3 SET Destination=%4 SET Folder=%5 SET ENV=%6 SET AppName=%7 SET Envlog=%8 ECHO Deployment of WEB > %Envlog% %Date% %Time% echo. @ECHO Stopping App Pools @ECHO Stopping App Pools >> %Envlog% %Date% %Time% D:\ICTTools\PSEXEC.EXE -d \\%Server% cmd.exe /c c:\windows\system32\inetsrv\appcmd STOP apppool /apppool.name:%AppPool% echo. @ECHO App Pools will be stopped in the background @ECHO App Pools will be stopped in the background >> %Envlog% %Date% %Time% Pause echo. IF EXIST "%Destination%" ( ECHO Deleting %AppName% %Folder% RMDIR %Destination% /s /q ECHO Destination Folder %Folder% Deleted ECHO Destination Folder %Folder% Deleted >> %Envlog% %Date% %Time% ) else ( ECHO Destination Folder %Destination% does not exist, please check ECHO Destination Folder %Destination% does not exist, please check >> %Envlog% %Date% %Time% Pause ) echo. @ECHO Starting Robocopy for %AppName% @ECHO Starting Robocopy for %AppName% >> %Envlog% %Date% %Time% echo. START /WAIT /MIN ROBOCOPY.EXE %Source% %Destination% *.* /S /NP /R:3 /W:5 /LOG:"Logs\Robo%AppName%%ENV%.log" D:\Tools\Windiff\windiff.exe %Source% %Destination% echo. @ECHO Finished with Robocopy @ECHO Finished with Robocopy >> %Envlog% %Date% %Time% echo. @ECHO Checking if App pools stopped: @ECHO Checking if App pools stopped: >> %Envlog% %Date% %Time% D:\ICTTools\PSEXEC.EXE \\%Server% c:\windows\system32\inetsrv\appcmd LIST apppool /apppool.name:%AppPool% @echo off set /p ask=All app pools stopped? (y/n) if %ask%==y (echo Great, please continue with deployemnt) else echo Before continuing please check why app pools did not stop @echo App pools stopped?: %ask% >> %Envlog% %Date% %Time% DEL %Source%\web.config echo. @ECHO Production Config check if exist "%Destination%\%ENV%-Web.config" ( echo. ECHO The Application production configuration file does exist. ECHO The Application production configuration file does exist. >> %Envlog% %Date% %Time% COPY %Destination%\%ENV%-Web.config web.config echo. ECHO Production %ENV%-Web.config has been renamed to web.config ECHO Production %ENV%-Web.config has been renamed to web.config >> %Envlog% %Date% %Time% ) else ( ECHO The Application production configuration file is missing in Production %AppName% ECHO The Application production configuration file is missing in Production %AppName% >> %Envlog% %Date% %Time% explorer %Destination% Pause ) echo. @ECHO Confirm that configs were renamed correclty, if yes please hit any key to START APP Pools @ECHO Confirm that configs were renamed correclty, if yes please hit any key to START APP Pools >> %Envlog% %Date% %Time% Pause echo. @ECHO Start %AppName% Application Pool >> %Envlog% %Date% %Time% D:\ICTTools\PSEXEC.EXE \\%Server% c:\windows\system32\inetsrv\appcmd START apppool /apppool.name:%AppPool% @echo off set /p ask=All app pools started? (y/n) if %ask%==y (echo Great, please continue with deployemnt) else echo Before continuing please check why app pools did not start @echo App pools started?: %ask% >> %Envlog% %Date% %Time% Pause echo. @ECHO Build Version for %AppName% @ECHO Build Version for %AppName% >> %Envlog% %Date% %Time% type %Destination%\buildinfo.xml echo. ECHO ............................................... @ECHO ...........Deployment Compelted................ @ECHO ...........Deployment Compelted................>> %Envlog% %Date% %Time% ECHO ............................................... here are my issues: Lets say I am running code for 3 servers, then for each instance: For all three servers I am performing destination folder delete even so destination folder is always the same, the code should only delete it in the 1st instance (when code is deployed to first server) then I would prefer if script would check if the code from the source and destination is the same and if it is it should delete the folder or not. Then based on 1: a) deleting web.config and renaming should only happen if code in destination is new b) Robocopy should not override files if they are the same I think there is /Xo option to do that any idea how to achieve that? :)

  Read the article

• Linux server became extremely slow

  - by Ariel Aharonson

  I have a file sharing website, and my files hosted in a server with those system specifications: 32GB RAM 12x3TB 2x Intel Quad Core E5620 I have files in this server up to 4gb for each file. 446gb is full (/36TB) [root@hosted-by ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 50G 2.7G 44G 6% / tmpfs 16G 0 16G 0% /dev/shm /dev/sda1 97M 57M 36M 62% /boot /dev/mapper/VolGroup01-LogVol00 33T 494G 33T 2% /home And take a look at this: Why is the wa% so high? (I think that what makes the server to be so slow)

  Read the article

• Is there a way to explore my WHS files via Xbox 360's Media Center app?

  - by bangoker

  I know its a "Console" question but its really more of a Media Center Extender question! I can access the data through the Video/Pictures options, but not through the Media Center App. Also I can only see the videos that are directly on the Videos folder on my WHS, but not any of the subfolders. Same thing in my Laptop, if I connect to my WHS through Media Player it will only show the videos on Videos but not any other sub-folder, but if I open Media Center I can then connect to server and see all the folders.

  Read the article

• Chrome - Why am I automatically authenticated to a web app even after clearing browser cookies?

  - by Howiecamp

  I am accessing a web application using Chrome. If I sign out of the app and clear all Chrome history/cookies/etc (even Flash cookies which are now handled by Chrome in the same Clear History area) and then re-access the site, I am automatically logged in without being prompted for credentials. I then launched Chrome in Incognito mode and was able to reproduce the same behavior. However, the I was prompted upon the first logon while in Incognito mode. The web application behaves as expected in Internet Explorer 10. Some info about the application: It's a Sharepoint site using NTLM authentication The credentials are Active Directory-based, as the username is domain\username My connection is over the Internet and there is no AD relationship between my local Windows account, my Windows PC. In other words I (meaning my locally logged on user and my PC) are not in any way part of their AD domain. The site is running SSL on port 443 Why might Chrome be automatically authenticating me?

  Read the article

• Fedora 11 System - Failed Hard Drive Removed, and Boot gets GRUB Hard Disk Error

  - by Mindful

  Greetings, I have a machine with a 120GB ATA drive that has what I thought to be non-essential data on it. I also have a 320GB SATA hard drive with the OS/Application/Files (good data I want to keep). My 120GB ATA is failing I believe, as my computer kept slowing to a halt. However, when I move the drive from BIOS my computer will not start, says "GRUB Hard Disk Error". I know that my Fedora system has an LVM setup. I am looking to just remove the 120GB drive from "the mix", and just have one hard drive. How do I recover ? Thank you. I have access to a Linux Live CD right now and can make any changes. However, it won't boot into my OS - it fails. UPDATE: here's my Grub.Conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd1,0) # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00 # initrd /initrd-version.img #boot=/dev/sda1 default=0 timeout=5 splashimage=(hd1,0)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.30.10-105.2.23.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.10-105.2.23.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.10-105.2.23.fc11.i686.PAE.img title Fedora (2.6.30.9-102.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.9-102.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.9-102.fc11.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.img title Fedora (2.6.27.21-170.2.56.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.21-170.2.56.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.21-170.2.56.fc10.i686.img title Fedora (2.6.27.19-170.2.35.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.19-170.2.35.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.19-170.2.35.fc10.i686.img title Upgrade to Fedora 10 (Cambridge) kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade stage2=http://chi-10g-1-mirror.fastsoft.net/pub/linux/fedora/linux/releases/10/Fedora/i386/os/images/install.img ks=hd:UUID=f11769ba-29bc-46de-8c40-a949720a438e:/upgrade/ks.cfg initrd /upgrade/initrd.img title Win rootnoverify (hd0,0) chainloader +1

  Read the article

• Running .NET app from network share in Win 7?

  - by mlangille

  We have a .NET 1.1 application that we keep on a netowork share. We install the .NET Framerwork to the local PCs and also set the full trust via the following: %windir%\Microsoft.NET\Framework\v1.1.4322\caspol -pp off -cg LocalIntranet_Zone FullTrust This has worked fine on all PCs to date however now we have a few new PCs with Win7 and the process no longer is working. The app will run fine from a local drive in Win7 but running the networked copy results in a general exception error. Any ideas on how to get this to work under Win7?

  Read the article

• should I put my multi-device btrfs filesystem on disk partitions or raw devices?

  - by Glyph

  If I'm going to create a multi-device btrfs filesystem. The official recommendation from the documentation apppears to be to create it on raw devices; i.e. /dev/sdb, /dev/sdc, etc, but this is not explained. Are there any advantages to creating a partition table on these devices first, either GPT or MBR, and then creating the filesystem on /dev/sdb1, /dev/sdc1 et cetera? Does feeding btrfs whole devices have some particular advantage, or are these basically equivalent?

  Read the article

• Disk monitor script with long file systems

  - by DD.

  $ df -H Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_app001-lv_root 34G 12G 21G 35% / tmpfs 8.4G 0 8.4G 0% /dev/shm /dev/sda1 508M 54M 429M 12% /boot /dev/mapper/vg_app001-lv_home 19G 309M 17G 2% /home I want to run a disk monitor script but because the filesystem is so long the row has been split into two lines and the script fails. Any suggestions?

  Read the article

• route http and ssh traffic normally, everything else via vpn tunnel

  - by Normadize

  I've read quite a bit and am close, I feel, and I'm pulling my hair out ... please help! I have an OpenVPN cliend whose server sets local routes and also changes the default gw (I know I can prevent that with --route-nopull). I'd like to have all outgoing http and ssh traffic via the local gw, and everything else via the vpn. Local IP is 192.168.1.6/24, gw 192.168.1.1. OpenVPN local IP is 10.102.1.6/32, gw 192.168.1.5 OpenVPN server is at {OPENVPN_SERVER_IP} Here's the route table after openvpn connection: # ip route show table main 0.0.0.0/1 via 10.102.1.5 dev tun0 default via 192.168.1.1 dev eth0 proto static 10.102.1.1 via 10.102.1.5 dev tun0 10.102.1.5 dev tun0 proto kernel scope link src 10.102.1.6 {OPENVPN_SERVER_IP} via 192.168.1.1 dev eth0 128.0.0.0/1 via 10.102.1.5 dev tun0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.6 metric 1 This makes all packets go via to the VPN tunnel except those destined for 192.168.1.0/24. Doing wget -qO- http://echoip.org shows the vpn server's address, as expected, the packets have 10.102.1.6 as source address (the vpn local ip), and are routed via tun0 ... as reported by tcpdump -i tun0 (tcpdump -i eth0 sees none of this traffic). What I tried was: create a 2nd routing table holding the 192.168.1.6/24 routing info (copied from the main table above) add an iptables -t mangle -I PREROUTING rule to mark packets destined for port 80 add an ip rule to match on the mangled packet and point it to the 2nd routing table add an ip rule for to 192.168.1.6 and from 192.168.1.6 to point to the 2nd routing table (though this is superfluous) changed the ipv4 filter validation to none in net.ipv4.conf.tun0.rp_filter=0 and net.ipv4.conf.eth0.rp_filter=0 I also tried an iptables mangle output rule, iptables nat prerouting rule. It still fails and I'm not sure what I'm missing: iptables mangle prerouting: packet still goes via vpn iptables mangle output: packet times out Is it not the case that to achieve what I want, then when doing wget http://echoip.org I should change the packet's source address to 192.168.1.6 before routing it off? But if I do that, the response from the http server would be routed back to 192.168.1.6 and wget would not see it as it is still bound to tun0 (the vpn interface)? Can a kind soul please help? What commands would you execute after the openvpn connects to achieve what I want? Looking forward to hair regrowth ...

  Read the article

• Group traffic shaping with traffic control?

  - by mmcbro

  I'm trying to limit the output bandwidth generated by an application with linux tc. This application sends me the source port of the request that I use has a filter to limit each user at a given downloadspeed. I feel that my setup could be managed way better if I had a better knowledge of linux tc. At the application level users are categorized as members of a group, each group have a limited bandwidth. Example : Members of group A : 512kbit/s Members of group B : 1Mbit/s Members of group C : 2Mbit/s When a user connects to the application, it retrieves the source port to the origin of the request from the user and sends me the source port and the bandwidth at which the user must be limited depending on group to which it belongs. With these informations I must add the appropriate rules so that the user (the source port in reality) is limited to the right bandwidth. If the user that connect isn't a member of any group it should be limited at a default bandwidth speed. I'm actually managing this by using a self made daemon that add or remove rules from when it receive a request from the application. With my little knowledge of tc I'm not able to limit other users (ones that aren't in a group, all others in fact) at a default speed and my configuration seems awful to me. Here is the base of my tc qdisc and classes : tc qdisc add dev eth0 root handle 1: htb tc class add dev eth0 parent 1: classid 1:1 htb rate 100mbps ceil 125mbps To classify a user at a given speed I have to add one subclass and then associate one filter to it : # a member of group A tc class add dev eth0 parent 1:1 classid 1:11 htb rate 512kbps ceil 512kbps # tts associated filter to match his source port tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 50001 flowid 1:11 # a member of group A again tc class add dev eth0 parent 1:1 classid 1:12 htb rate 512kbps ceil 512kbps # tts associated filter to match his source port tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 61524 flowid 1:12 # a member of group B again tc class add dev eth0 parent 1:1 classid 1:13 htb rate 1000kbps ceil 1000kbps # tts associated filter to match his source port tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 57200 flowid 1:13 I already know that a source port could be the same if its coming from a different IP address the thing is the application is behind a proxy so I don't have to manage any IP address in that situation. I would like to know how to manage the fact that for all other users (request/source port, whatever you name it) could be limited at a given speed each. I mean that each connection should be able to use at max 100kbit/s for example, not a shared 100kbit/s. I also would like to know if there is a way to simplify my rules. I don't know if it is possible to use only one class per group and associate multiple filters to the same class so each users could be handled by one class and not one class per user. I appreciate any advice, thanks.

  Read the article

• Viewing Postscript (or PDF) on OS X: Aliasing issues

  - by mankoff

  I am generating postscript graphics and am trying to find a balance between non-aliasing and over-aliasing. If I use the raw ghostscript viewer gs on the Postscript, it looks good. The text appears anti-aliased, but the image remains nice and blocky. Unfortunately, gs has no real user interface and loses all of the nice things that Preview.app has. I could install gv, but the dependency bloat is huge! It requires all of gnome. And even that isn't a great viewer compared to Preview.app or Skim.app. Here is an image viewed with gs: From a user-interaction and Mac-ish perspective, Preview.app (or Skim.app is a much nicer program to use. They have the option to turn on or off aliasing, but neither option looks very good. Which aliasing on, the image is blurry. When it is off, the graphic matches what is seen from gs, but there are two issues. Minor issue: the font is ugly. Uglier than with gs. Major issue: Every PDF is un-aliased, making it hard to read regular PDFs full of text. So, in summary: Is there a way to manually generate the PDF from the PS that overcomes these issues? Is there a way to find a middle ground of alias/unalias with Preview.app? Is there another app that displays with quality like gs, but has a decent UI like Skim.app or Preview.app Is there a way to have Preview.app turn off aliasing for only one file (containing graphics) but leave it enabled in general so that text PDFs are still readable?

  Read the article

• Copy the contents of one partition to another partition hardrive

  - by user35319

  if i write this command in linux "dd if=/dev/sda1 of=/dev/sda2" it will copy the whole /dev/sda1 partition bit by bit to /dev/sda2 ......is there any way in WINOWS not in linux that i can just only copy the contents of one partition to another partition not the whole partition.....

  Read the article

• Single domain name potentially resolving to multiple servers

  - by Jace

  first time here at Server Fault, and I apologize in advance that this domain stuff is not really my strength. Any and all suggestions are much appreciated. I am completely lost and incredibly tired! I've inherited an incredibly convoluted system from my predecessor, and I'm trying to find a way to solve it - or I need to be told that it just isn't possible. I've got an old site on ServerA (some kind of Linux distribution), with the domain SomeDomain.com There is a new site sitting on ServerB (Ubuntu), with the intention of having SomeDomain.com to serve it in the future (it is replacing the old site) ServerA also has a web app that is currently in use by other departments within the company (accessible at SomeDomain.com/web-app/) The goal: To have SomeDomain.com and all extensions of this domain name (sub-domains, URL's etc.) serve the new site on ServerB. BUT, the URL SomeDomain.com/web-app/ must serve the Web App on ServerA. The Catch: The ServerA is a shared server with a hosting company with VERY limiting restrictions in place - I cannot adjust DNS settings (apart from Name servers - but cannot set A records or anything, I have full access to ServerB to do as I wish). Therefore the web-app MUST be served from SomeDomain.com/web-app/ and not from a sub-domain or anything. These limitations make migrating the web-app from Server A to Server B rather undesirable, AND this web-app will be replaced in the near future, so it isn't worth the effort right now. Therefore, ultimately I will want 1 domain name to resolve to Server B's IP address most of the time, but in the event that the URL is SomeDomain.com/web-app/, it should resolve to Server A's IP. Note: The domain names don't, technically, have to resolve to one IP or another - but ultimately the URL's must stay consistent Some things I have tried: I've looked into mod_rewrite and .htaccess to try and achieve this effect, but it doesn't look like it's going to work for me - but I may have done it wrong (On Server B, I just checked if the request URI was /web-app/ and tried to serve the /web-app/ folder on Server A) I do have the ability to modify the name servers on both servers I am not able to make a sub domain on Server A that points back to Server A (I assume because the hosting company's servers use the URL to determine what site the serve). I figured this could be good as I'd could set an A record on Server B to point to the web app on Server A - but alas, Server A requires SomeDomain.com. If there is any more information I can give, please let me know. I need a nudge in the right direction, ideas or a solution.

  Read the article

• App to slice'n'dice video, specifically remove chunks, on a Mac?

  - by Phillip Oldham

  I have a couple of collections of DVD Box-Sets I've ripped to my mac. Now I'd like to sweeten the viewing experience by removing the title sequences and credits so that viewing doesn't mean I have to keep reaching for the remote to skip 30 seconds of annoying music (think watching multiple episodes of Family Guy). If I can find an app that will let me do this reasonably quickly manually that would be great, but it would be perfect if I could dump a load of commands into a file and have everything trimmed while the mac is "inactive". I'm thinking that if I can specify chunks of time to remove from the original file that would be perfect. I had a quick look at importing into iMovie to do it manually and gave up at the "Processing Thumbnails" stage as it said it would be a couple of hours to produce them for a 45min mp4 file, which I can understand at 25fps but I'm not willing to wait, especially when I've got over a week's worth of files. Any suggestions?

  Read the article

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >