Search Results

Search found 14821 results on 593 pages for 'device driver'.

Page 267/593 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >

  • Flexible Keyboard starts too late

    - by user289237
    So I just managed to revive an old Windows XP machine that I am getting ready to format into Ubuntu 14.04. However the USB keyboard I have plugged in, powers down with the machine (obviously) but doesn't power up until the Windows loading screen (After my only chance to select boot device, for which I have a USB) It is really frustrating as this renders the f12 key useless and me stuck with a decade + 2 old machine. Thanks for any help :D

    Read the article

  • No GRUB Screen or recovery mode on Boot after 12.04 Upgrade

    - by Nick
    I tried the live boot CD and boot-repair, also loaded the Desktop install CD, and it looks like all partitions check out OK. However, when I try to boot Linux (the only bootable partition on the computer) I get a blank screen. Every so often the screen give me something akin to: Assuming write through cache Asking for cache data failed it appears to start booting, then hangs. Ctrl+Alt+Delete shuts down the machine The last message during boot is "STarting TiMidity++ ALSA midi emulation... [OK]" I used boot-repair to generate a boot info report. One thing looks odd to me- it reports a missing core.img on /dev/sda1. Here is the full info: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info August 2nd 2012] ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive. = Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda1 and looks at sector 18406911 of the same hard drive for core.img, but core.img can not be found at this location. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/extlinux/extlinux.conf /boot/grub/core.img sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 307,339,514 307,339,452 83 Linux /dev/sda2 307,339,515 312,576,704 5,237,190 5 Extended /dev/sda5 307,339,578 312,576,704 5,237,127 82 Linux swap / Solaris Drive: sdb _______________________________________ Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 625,142,447 625,140,400 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 11b4d633-7863-40b2-a6ca-da5f82c3ad0b ext4 /dev/sda5 cb8d65f4-8cf9-4088-b804-e3dea2151033 swap /dev/sdb1 349E7C109E7BC8BE ntfs Personal1 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sdb1 /media/Personal1 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sr0 /live/image iso9660 (ro,noatime) ...(a bunch of config file info- let me know if anyone wants to see it!) But usually I just get "Cannot Display This Video Mode", which I know means the video output is not usable by the monitor. I'm looking for a way to get into a recovery mode.I'd really like to avoid wiping the drive. Any thoughts?

    Read the article

  • Shrink NTFS Windows 7 Partition with GParted

    - by user15961
    I am running a dual-boot system with Windows 7 and Ubuntu 10.10. Initially I allocated about 20GB for my Ubuntu partition; however, I quickly ran out of that space and am now looking to expand my partition. Currently my NTFS partition (450GB) has about 130GB of free space. I tried using GParted to shrink the partition but encountered the following error. I booted into windows so I could run chkdsk but the countdown freezes at 1 upon reboot. I tried multiple methods to resolve that issue but nothing seems to work. Finally I gave up, and now I just want to know what is the best way for me to force GParted to shrink the partition regardless of the errors. I don't really have anything important and I don't mind risking the data. I just don't want to wipe the entire NTFS partition because I don't have a Windows install CD and might require Windows later on for some programs. I tried using sudo ntfsresize but that spews out the same error as GParted... Any ideas? Check and repair file system (ntfs) on /dev/sda2 00:00:09 ( ERROR ) calibrate /dev/sda2 00:00:00 ( SUCCESS ) path: /dev/sda2 start: 36944325 end: 976771119 size: 939826795 (448.14 GiB) check file system on /dev/sda2 for errors and (if possible) fix them 00:00:09 ( ERROR ) ntfsresize -P -i -f -v /dev/sda2 ntfsresize v2.0.0 (libntfs 10:0:0) Device name : /dev/sda2 NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 481191318016 bytes (481192 MB) Current device size: 481191319040 bytes (481192 MB) Checking for bad sectors ... Checking filesystem consistency ... Cluster 63468 is referenced multiple times! Cluster 63469 is referenced multiple times! Cluster 63465 is referenced multiple times! Cluster 63466 is referenced multiple times! Cluster 63467 is referenced multiple times! Cluster 165621 is referenced multiple times! Cluster 165622 is referenced multiple times! Cluster 165623 is referenced multiple times! Cluster 165624 is referenced multiple times! ERROR: Filesystem check failed! ERROR: 9 clusters are referenced multiply times. NTFS is inconsistent. Run chkdsk /f on Windows then reboot it TWICE! The usage of the /f parameter is very IMPORTANT! No modification was and will be made to NTFS by this software until it gets repaired.

    Read the article

  • import mini DV films from Samsung digital cam VP-D353 [USB]

    - by bobo
    I tried to import mini DV films from my old video camera VP-D353 and it's not reconised by my lubuntu.( 12.04 ) I tried "DVGRAB" which should work but it doesn't. I Found this tutorial http://www.foscode.com/linux-minidv-usb-video-capture/ But it's just saying "waiting for dv" I don't really know what should I do now. Here what I've got for the camera when I write : sudo lsub Bus 002 Device 013: ID 04e8:120f Samsung Electronics Co., Ltd thanks

    Read the article

  • Wireless cycling between connected and disconnected

    - by Tony Kilgore
    My friend has a Acer Aspire 5733Z-4851 it keeps disconnecting and connecting to his wifi but his hard wire will run just fine. Any suggestions? All the codes: lspci: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) lsmod: Module Size Used by snd_seq_dummy 12798 0 rfcomm 46619 0 bnep 18140 2 bluetooth 209199 10 rfcomm,bnep parport_pc 32688 0 ppdev 17073 0 lp 17759 0 parport 46345 3 parport_pc,ppdev,lp binfmt_misc 17500 1 ums_realtek 17949 0 snd_hda_codec_realtek 77876 1 uas 17844 0 coretemp 13400 0 snd_hda_intel 33491 4 snd_hda_codec 134212 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 96580 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30512 1 snd_seq_midi uvcvideo 76749 0 videobuf2_core 32851 1 uvcvideo videodev 120309 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12860 1 uvcvideo videobuf2_memops 13368 1 videobuf2_vmalloc snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61521 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event snd_timer 29425 2 snd_pcm,snd_seq arc4 12529 2 snd_seq_device 14497 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq psmouse 95552 0 ath9k 131308 0 tg3 148780 0 snd 78734 17 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device microcode 22803 0 mac80211 539908 1 ath9k ath9k_common 14055 1 ath9k ath9k_hw 395218 2 ath9k,ath9k_common ath 23827 3 ath9k,ath9k_common,ath9k_hw i915 520629 3 soundcore 15047 1 snd serio_raw 13215 0 cfg80211 206566 3 ath9k,mac80211,ath snd_page_alloc 18484 2 snd_hda_intel,snd_pcm intel_ips 18049 0 lpc_ich 17061 0 drm_kms_helper 46784 1 i915 drm 275528 4 i915,drm_kms_helper mei 40690 0 i2c_algo_bit 13413 1 i915 joydev 17457 0 acer_wmi 32453 0 sparse_keymap 13890 1 acer_wmi mxm_wmi 12979 0 mac_hid 13205 0 wmi 19070 2 acer_wmi,mxm_wmi video 19335 2 i915,acer_wmi usb_storage 48838 1 ums_realtek sudo lshw -C network: *-network description: Ethernet interface product: NetLink BCM57780 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: b8:70:f4:9a:35:b6 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=half firmware=sb latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:44 memory:d3400000-d340ffff[/QUOTE][QUOTE]*-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 68:a3:c4:eb:60:7d width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-19-generic firmware=N/A ip=192.168.0.168 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d2400000-d240ffff)

    Read the article

  • Why is my dual-boot Ubuntu partition showing up as a peripheral "root.disk"?

    - by Don
    I recently installed Ubuntu 12.04, which I had been booting from a usb key, as a dual-boot on my machine running Windows 7. From what I had read online while researching, I was prepared to have to shrink the Windows partition and all that. But I never had to - it really was just a few clicks here and there and it was installed. I'm still pretty confused about it, but whatever, it worked, and the two peacefully coexist on my machine, and I have broken things to fix before I worry about fixing unbroken things. So yesterday I got it in my head to look at my partitions (I was considering making an all new partition to install the Windows 8 Release Preview). What I saw confused me. Here's a screenshot of the disk utility. At this moment, there is nothing connected to my computer, and nothing in any of the optical drives/ports/card readers/etc. Can you help me figure out what's going on here? Don's Machine is, I believe, my Windows partition - that's the name I assigned my machine from Windows Explorer. PQSERVICE is from what I can find online also Windows, but having to do with backup. And SYSTEM REQUIRED, if I browse it in Ubuntu, is definitely something to do with booting, and I believe it is also Windows'. According to the sizes shown, those three together should use up my 500 GB HD. Then further down, as a "peripheral device", it lists that 31 GB disk. This is obviously my Ubuntu (Model:Linux Loop:root.disk), but why is it showing up as a peripheral? So, to sum up those questions and to add some more random ones I had: Why is Ubuntu showing up as a peripheral device? If the Windows sections take up all 500 GB, where does Ubuntu live? If I renamed the disk partitions, would my life become a nightmare (seriously - can I safely rename them)? Why didn't I have to resize the Windows partition in the first place? Would giving Ubuntu more space improve its performance (it hangs alot)? Is it possible to have a partition for each OS (Windows 7 & 8, Ubuntu), a partition for files, and a separate partition for backups? Is this towards the good or bad idea end of the spectrum? @Elfy, would that explain why it keeps hanging? I guess I'll backup my files, rip it out, and reinstall it correctly later on today.

    Read the article

  • Google I/O 2010 - Building push applications for Android

    Google I/O 2010 - Building push applications for Android Google I/O 2010 - Building push applications for Android Android 201 Debajit Ghosh Are you building cloud based apps for Android but are wondering how you can avoid polling and enable push functionality? This session will introduce the new Android Cloud to Device Messaging framework, showing you how you can integrate compelling mobile alert, send-to-phone, and two-way push sync functionality into your Android apps. For all I/O 2010 sessions, please go to code.google.com From: GoogleDevelopers Views: 3 0 ratings Time: 56:28 More in Science & Technology

    Read the article

  • Hard Drive Formatting and Unmounting Errors

    - by Lucas Carther
    I'm trying to format a hard drive using Ubuntu 11.10. Every time that I attempt to format it from the Disk Utility, I get the error saying the device is busy, and under details it says: /dev/sda1 is mounted Then when I try to unmount it from the disk utility, it shows that the operation has failed and says: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=70D6-1701 from /boot/efi

    Read the article

  • PhotoNote WordPress Theme by WPZOOM

    - by Matt
    PhotoNote is the new photo and video WordPress theme from WPZOOM. This is a premium theme that offers a concise way to show your photos, videos & blog posts, and has a Responsive Layout which means that the theme will automatically resize to fit any screen resolution or device it is opened on. This is [...] Related posts:Notebook Multimedia WordPress Theme Beveled Premium WordPress Theme by Woothemes Genesis WordPress Theme Framework

    Read the article

  • Oracle OpenWorld 2012 - What's New

    - by Cinzia Mascanzoni
    Oracle OpenWorld 2012 is now over. Here a summary of major announcements on Hardware and Technology. Oracle Unveils Expanded Oracle Cloud Services Portfolio Oracle Unveils New Partner Cloud Programs Oracle Announces Latest Release of Oracle Exalogic Elastic Cloud Oracle Announces Oracle Exadata X3 Database In-Memory Machine Oracle Outlines Opportunity to Transform Industries from Device to Data Center with Embedded Java Oracle Announces Oracle Solaris 11.1 Latest Release of Oracle Exalytics In-Memory Machine Software Enables Customers to View and Analyze Data at the Speed of Business New Release of Oracle Business Intelligence Enables Users to Quickly Access and Analyze Key Business Information, Anytime, Anywhere

    Read the article

  • How to track vehicles with GPS and have that data available for an app

    - by Blaz Art
    What type of hardware and software architecture would you recommend for the task of somehow tracking a vehicle for the convenience of the app user to know where the vehicle is? I realize there are many ways to do it, but all them I think have to include this (correct me if im wrong) a gps tracking device inside the vehicle a way transmitting the gps location to a server from within the vehicle a server which tells the apps the locations of the vehicle the app

    Read the article

  • udev hide partition in nautilus for specific user/group

    - by user64780
    I'm trying to hide a partition form a specific group of users in Ubuntu 12.04. I have created a new rule in /etc/udev/rules.d/99-hide-disk.rules with KERNEL="sda3",ENV{UDISKS_PRESENTATION_HIDE}="1" And this works for all users. I tried KERNEL="sda3",ENV{UDISKS_PRESENTATION_HIDE}="1",GROUP="adm",MODE:="0700 but the partition is still hidden. That changes the group and permissions on the device rather than the rule. How do I make the rule only apply to a particular group of users?

    Read the article

  • Best triple head display setup

    - by dgel
    I'm currently running Ubuntu 12.04 with a darn good triple head display setup. I've got a VisionTek 900530 Radeon HD 5450 512MB DDR3 PCI Express video card that has two DVI outputs and one Mini DisplayPort that I have connected to a HDMI adapter. I'm running three identical Asus 1920x1080 monitors that each have a DVI, VGA, and HDMI input. I'm using the xorg-edgers ppa, so I'm using the open source radeon driver version 6.99.99. I tried using the ATI binary fglrx driver, but I wasn't able to get the three monitors working properly- the monitor connected via HDMI / DisplayPort wouldn't run at full resolution. The setup is almost perfect: Compiz runs fine and is quite snappy. I'm not able to use that great compiz feature where you can drag a window to the side of a display and it will half maximize. I occasionally experience display corruption weirdness with Unity and need to restart it. When I use a dropdown menu in LibreOffice it often pops the menu down in another window. For example, if I'm using the center monitor and click the Insert menu, the menu pulls down on the monitor to my right, forcing me to chase it. If I chase down the menu and choose Manual Break, the dialog appears over on my left monitor. This absurdity is mildly entertaining but has lost its novelty. I've decided to build a new system and have spared no expense- latest i7 processor, SSD, etc. I really like the performance of the Nvidia binary drivers, so I put two ZOTAC ZT-40707-10L GeForce GT 440 in the system, figuring I'd have four DVI outputs and an awesome triple (or even eventually quad) head setup. Unfortunately it appears that I didn't do sufficient research before my purchase. It seems that Nvidia TwinView only supports two monitors on one card (I guess that's why they call it TwinView...). I messed around with running two X servers, but I really don't want that- being able to drag windows to any monitor is critical. It doesn't sound like Xinerama is an option because from what I understand it simply doesn't support Compiz. I've seen a BaseMosaic option that can be used with the Nvidia drivers that appears to support an almost unlimited number of heads- unfortunately me cheap little cards don't support it. I'm also not sure whether you'll still have all nice maximizing and snapping that TwinView provides, or whether Ubuntu will only see it as one massive display. I put my old trusty ATI card into my new system and installed 12.10. I'm using the opensource radeon drivers again because even in 12.10 I can't get the fglrx binary drivers to do triple head. Unfortunately, even with an unbelievably powerful system the experience is extremely sluggish (much more so than my experience in 12.04). The menu scattering problem appears to be fixed, but I get a lot of nasty Unity display corruption. So finally, my question is this: What hardware / drivers should I use? I'm willing to buy (almost) any video card(s). I have two PCI-Express 3.0 slots on my motherboard (which has an integrated Intel HD card). I'm willing to use ATI or Nvidia cards and willing to run Ubuntu 12.04.1 or 12.10. I'm not a gamer, but do want beautiful and snappy Compiz effects. Does anyone out there have the perfect triple head setup in 12.04 or 12.10? What hardware / drivers are you using? I have those two Nvidia cards but will probably be returning them unless someone knows a way to use them together for a triple head setup. Since I'm having pretty good luck with a single ATI card providing three displays, should I just buy a beefier one with the hopes that it will fix the horrible sluggishness I'm experiencing in 12.10?

    Read the article

  • Lost network interface after mac change

    - by Arturo Grc
    I'm using Ubuntu server 12.04 inside Virtualbox and everything was working as expected, but since I changed the mac address in Virtualbox network settings the network interface is not being recognized on Ubuntu. I don't remember the old mac address and everytime Ubuntu starts shows waiting for network configuration when I use ifconfig only appears lo (loopback device) and eth0 is lost, how can I fix this problem?

    Read the article

  • How to edit pdf metadata from command line?

    - by bdr529
    I need a command line tool for editing metadata of pdf-files. I'm using a Aiptek MyNote Premium tablet for writing my notes and minutes on this device, import them later and convert them to pdf automatically with a simple script using inkscape and ghostscript. Is there any command line tool to add some categories to the pdf's metadata, so i can find the pdf later (e.g. with gnome-do) by categories?

    Read the article

  • xubuntu 12.04 slow boot

    - by user76390
    my xubuntu 12.04 fresh installed boots in more than 30 seconds, here the first big gap in dmesg: [ 1.984795] firewire_core: created device fw0: GUID 000ae4060034203a, S400 [ 2.336568] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 15.465275] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.503348] udevd[331]: starting version 175 once booted everything works fine (networks included) thanks for help!

    Read the article

  • Kindles Come to Classroom in Ghana

    <b>Wired:</b> "Take Ghana, West Africa, for example. If you are a school in a small village with satellite internet and solar power, what device would be best for you? The power-sucking, data-heavy iPad, or the Kindle..."

    Read the article

  • Give write access to USB and Serial devices automatically

    - by Saeid87
    I am working with some USB and Serial micro-controllers. Everytime I plug a device I have to do the following command to give it write access, and also my password: sudo chmod 666 /dev/ttyUSB0 Can I set my Ubuntu to automatically give write access to pluged in devices? If not, how can I make a batch file that I can easily give the access to port I want for example if I run the following command it does the job: giveaccess -usb0

    Read the article

  • Can I use PBOs for textures in iOS?

    - by Radu
    As far as I can see, there is no GL_PIXEL_UNPACK_BUFFER. Also, the OpenGL ES 2.0 specification (and as far as I know, no iOS device currently supports OpenGL ES 2.0) states that glMapBufferOES() can only use GL_ARRAY_BUFFER as a target, yet glTexImage2D() and glTexSubImage2D() only seem to use PBOs if GL_PIXEL_UNPACK_BUFFER is bound. The OpenGL documentation for glBindBuffer() also states that: GL_PIXEL_PACK_BUFFER and GL_PIXEL_UNPACK_BUFFER are available only if the GL version is 2.1 or greater. So, can I use PBOs for textures? Am I missing something obvious?

    Read the article

  • How do I get to work my Atheros AR9485 Wireless card in Ubuntu 14.04 LTS?

    - by Ivan Kreimer
    I've recently installed Ubuntu 14.04 LTS in my ASUS D550CA, and so far things have gone great. The only problem I've got is the Wi-Fi. It doesn't work. I've got an Qualcomm Atheros AR9485. I've tried installing the drivers, but the sytem says it doesn't find any. So I started looking around this forum for solutions. I've read every single post from this forum about my Wi-Fi network adapter, and I've found nothing that solves my problem. Let me give you some info about my configuration. Disclaimer: my configuration is in spanish, so if you don't understand something you can either use Google translate, or use your imagination. :D When I run $ sudo lshw -C network this is what I get: *-network DEACTIVATED descripción: Interfaz inalámbrica producto: AR9485 Wireless Network Adapter fabricante: Qualcomm Atheros id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: wlan0 versión: 01 serie: 28:e3:47:5c:5d:3f anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.13.0-34-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:f7d00000-f7d7ffff memoria:f7d80000-f7d8ffff *-network descripción: Ethernet interface producto: RTL8101E/RTL8102E PCI Express Fast Ethernet controller fabricante: Realtek Semiconductor Co., Ltd. id físico: 0.2 información del bus: pci@0000:03:00.2 nombre lógico: eth0 versión: 06 serie: e0:3f:49:ce:57:49 tamaño: 100Mbit/s capacidad: 100Mbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8402-1_0.0.1 10/26/11 ip=181.165.245.39 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s recursos: irq:41 ioport:e000(size=256) memoria:f0004000-f0004fff memoria:f0000000-f0003fff At the beginning, you'll see that it says "*-network DEACTIVATED" (or at least that's what I translated), is that something bad? Then, when I run ipconfig this is what I get: eth0 Link encap:Ethernet direcciónHW e0:3f:49:ce:57:49 Direc. inet:181.165.245.39 Difus.:181.165.245.255 Másc:255.255.255.0 Dirección inet6: fe80::e23f:49ff:fece:5749/64 Alcance:Enlace ACTIVO DIFUSIÓN FUNCIONANDO MULTICAST MTU:1500 Métrica:1 Paquetes RX:221199 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:62025 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:124409589 (124.4 MB) TX bytes:7471899 (7.4 MB) lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:65536 Métrica:1 Paquetes RX:2977 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:2977 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:397158 (397.1 KB) TX bytes:397158 (397.1 KB) When I put iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Finally, when I put sudo rfkill list all, I got: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-bluetooth: Bluetooth Soft blocked: no Hard blocked: no I hope anyone can help me solve this, I've searched a lot and found no solution. Thanks a lot.

    Read the article

  • HP Deskjet D2680 Review

    <b>Linux and Whatever:</b> "The HP Deskjet D2680 is very easy to install in Linux. First I installed hplip and then I installed hplip-gui. After that it was as simple as plugging the printer in and then opening the HP device manager."

    Read the article

  • Help Me Help You Fix That

    - by BuckWoody
    If you've been redirected here because you posted on a forum, or asked a question in an e-mail, the person wanted you to know how to get help quickly from a group of folks who are willing to do so - but whose time is valuable. You need to put a little effort into the question first to get others to assist. This is how to do that. It will only take you a moment to read... 1. State the problem succinctly in the title When an e-mail thread starts, or a forum post is the "head" of the conversation, you'll attract more helpers by using a descriptive headline than a vague one. This: "Driver for Epson Line Printer Not Installing on Operating System XYZ" Not this: "Can't print - PLEASE HELP" 2. Explain the Error Completely Make sure you include all pertinent information in the request. More information is better, there's almost no way to add too much data to the discussion. What you were doing, what happened, what you saw, the error message, visuals, screen shots, whatever you can include. This: "I'm getting error '5203 - Driver not compatible with Operating System since about 25 years ago' in a message box on the screen when I tried to run the SETUP.COM file from my older computer. It was a 1995 Compaq Proliant and worked correctly there.." Not this: "I get an error message in a box. It won't install." 3. Explain what you have done to research the problem If the first thing you do is ask a question without doing any research, you're lazy, and no one wants to help you. Using one of the many fine search engines you can most always find the answer to your problem. Sometimes you can't. Do yourself a favor - open a notepad app, and paste the URL's as you look them up. If you get your answer, don't save the note. If you don't get an answer, send the list along with the problem. It will show that you've tried, and also keep people from sending you links that you've already checked. This: "I read the fine manual, and it doesn't mention Operating System XYZ for some reason. Also, I checked the following links, but the instructions there didn't fix the problem: " Not this: <NULL> 4. Say "Please" and "Thank You" Remember, you're asking for help. No one owes you their valuable time. Ask politely, don't pester, endure the people who are rude to you, and when your question is answered, respond back to the thread or e-mail with a thank you to close it out. It helps others that have your same problem know that this is the correct answer. This: "I could really use some help here - if you have any pointers or things to try, I'd appreciate it." Not this: "I really need this done right now - why are there no responses?" This: "Thanks for those responses - that last one did the trick. Turns out I needed a new printer anyway, didn't realize they were so inexpensive now." Not this: <NULL> There are a lot of motivated people that will help you. Help them do that.

    Read the article

  • Cursor running wild, then crashes on an Asus G73sw

    - by Yarchmon
    The cursor sometimes goes wild, I get random clicks, the windows are resizing, the cursor disappears. In the worst case, clicks and keyboards are disabled. I've tried the solution given on doc.ubuntu-fr.org and add tu grub : i8042.nomux=1 i8042.reset=1 in GRUB_CMDLINE_LINUX_DEFAULT But it didn't work What can I do ? Graphic card : Geforce GTX460M. Ubuntu : 11.10 (64 bits). Laptop Asus G73sw Interface : Unity (since 11.10) - didn't get this problem with Gnome before. Complement: when a window is resizing, it gets drag-boxes at every corner, center of sides and center of the window. It looks like my touchpad sends random info, or like a "ghost" touchscreen. lspci result : 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GTX 460M] (rev a1) 01:00.1 Audio device: nVidia Corporation GF106 High Definition Audio Controller (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB Controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 04) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Edit 01-09-12: Tried on Ubuntu 2D: the behavior is different: it's like i'm randomly clicking on the workspace switcher icon. In the worst case, it can happen several times in a minute.

    Read the article

  • Drawing 2D Grid in 3D View - Need help with method

    - by Deukalion
    I'm trying to draw a simple 2D grid for an editor, to able to navigate more clearly around the 3D space, but I can't render it: Grid2D class, creates a grid of a certain size at a location and should just draw lines. public class Grid2D : IShape { private VertexPositionColor[] _vertices; private Vector2 _size; private Vector3 _location; private int _faces; public Grid2D(Vector2 size, Vector3 location, Color color) { float x = 0, y = 0; if (size.X < 1f) { size.X = 1f; } if (size.Y < 1f) { size.Y = 1f; } _size = size; _location = location; List<VertexPositionColor> vertices = new List<VertexPositionColor>(); _faces = 0; for (y = -size.Y; y <= size.Y; y++) { vertices.Add(new VertexPositionColor(location + new Vector3(-size.X, y, 0), color)); vertices.Add(new VertexPositionColor(location + new Vector3(size.X, y, 0), color)); _faces++; } for (x = -size.X; x <= size.X; x++) { vertices.Add(new VertexPositionColor(location + new Vector3(x, -size.Y, 0), color)); vertices.Add(new VertexPositionColor(location + new Vector3(x, size.Y, 0), color)); _faces++; } _vertices = vertices.ToArray(); } public void Render(GraphicsDevice device) { device.DrawUserPrimitives<VertexPositionColor>(PrimitiveType.LineList, _vertices, 0, _faces); } } Like this: +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ Anyone knows what I'm doing wrong? If I add a Shape without texture, it's set automatically to VertexColorEnabled and TextureEnabled = false. This is how I render it: foreach (RenderObject render in _renderObjects) { render.Effect.Projection = projection; render.Effect.View = view; render.Effect.World = world; foreach (EffectPass pass in render.Effect.CurrentTechnique.Passes) { pass.Apply(); try { // Could be a Grid2D render.Shape.Render(_device); } catch { throw; } } } Exception is thrown: The current vertex shader declaration does not include all the elements required by the current Vertex Shader. Normal0 is missing. Simply put, I can't figure out how to draw a few lines. I want to draw them one at a time and I guess that's the problem I haven't figured out, and even when I tried rendering vertices[i], vertices[i+1] and primitiveCount = 1, vertices = 2, and so on it didn't work either. Any suggestions?

    Read the article

  • HTG Explains: Should You Buy Extended Warranties?

    - by Chris Hoffman
    Buy something at an electronics store and you’ll be confronted by a pushy salesperson who insists you need an extended warranty. You’ll also see extended warranties pushed hard when shopping online. But are they worth it? There’s a reason stores push extended warranties so hard. They’re almost always pure profit for the store involved. An electronics store may live on razor-thin product margins and make big profits on extended warranties and overpriced HDMI cables. You’re Already Getting Multiple Warranties First, back up. The product you’re buying already includes a warranty. In fact, you’re probably getting several different types of warranties. Store Return and Exchange: Most electronics stores allow you to return a malfunctioning product within the first 15 or 30 days and they’ll provide you with a new one. The exact period of time will vary from store to store. If you walk out of the store with a defective product and have to swap it for a new one within the first few weeks, this should be easy. Manufacturer Warranty: A device’s manufacturer — whether the device is a laptop, a television, or a graphics card — offers their own warranty period. The manufacturer warranty covers you after the store refuses to take the product back and exchange it. The length of this warranty depends on the type of product. For example, a cheap laptop may only offer a one-year manufacturer warranty, while a more expensive laptop may offer a two-year warranty. Credit Card Warranty Extension: Many credit cards offer free extended warranties on products you buy with that credit card. Credit card companies will often give you an additional year of warranty. For example, if you buy a laptop with a two year warranty and it fails in the third year, you could then contact your credit card company and they’d cover the cost of fixing or replacing it. Check your credit card’s benefits and fine print for more information. Why Extended Warranties Are Bad You’re already getting a fairly long warranty period, especially if you have a credit card that offers you a free extended warranty — these are fairly common. If the product you get is a “lemon” and has a manufacturing error, it will likely fail pretty soon — well within your warranty period. The extended warranty matters after all your other warranties are exhausted. In the case of a laptop with a two-year warranty that you purchase with a credit card giving you a one-year warranty extension, your extended warranty will kick in three years after you purchase the laptop. In that many years, your current laptop will likely feel pretty old and laptops that are as good — or better — will likely be pretty cheap. If it’s a television, better television displays will be available at a lower price point. You’ll either want to upgrade to a newer model or you’ll be able to buy a new, just-as-good product for very cheap. You’ll only have to pay out-of-pocket if your device fails after the normal warranty period — in over two or three years for typical laptops purchased with a decent credit card. Save the money you would have spent on the warranty and put it towards a future upgrade. How Much Do Extended Warranties Cost? Let’s look at an example from a typical pushy retail outlet, Best Buy. We went to Best Buy’s website and found a pretty standard $600 Samsung laptop. This laptop comes with a one-year warranty period. If purchased with a fairly common credit card, you can easily get a two-year warranty period on this laptop without spending an additional penny. (Yes, such credit cards are available with no yearly fees.) During the check-out process, Best Buy tries to sell you a Geek Squad “Accidental Protection Plan.” To get an additional year of Best Buy’s extended warranty, you’d have to pay $324.98 for a “3-Year Accidental Protection Plan”. You’d basically be paying more than half the price of your laptop for an additional year of warranty — remember, the standard warranties would cover you anyway for the first two years. If this laptop did break sometime between two and three years from now, we wouldn’t be surprised if you could purchase a comparable laptop for about $325 anyway. And, if you don’t need to replace it, you’ve saved that money. Best Buy would object that this isn’t a standard extended warranty. It’s a supercharged warranty plan that will also provide coverage if you spill something on your laptop or drop it and break it. You just have to ask yourself a question. What are the odds that you’ll drop your laptop or spill something on it? They’re probably pretty low if you’re a typical human being. Is it worth spending more than half the price of the laptop just in case you’ll make an uncommon mistake? Probably not. There may be occasional exceptions to this — some Apple users swear by Apple’s AppleCare, for example — but you should generally avoid buying these things. There’s a reason stores are so pushy about extended warranties, and it’s not because they want to help protect you. It’s because they’re making lots of profit from these plans, and they’re making so much profit because they’re not a good deal for customers. Image Credit: Philip Taylor on Flickr     

    Read the article

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >