Search Results

Search found 17625 results on 705 pages for 'techno log'.

Page 267/705 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >

  • How do I make Nginx redirect all requests for files which do not exist to a single php file?

    - by Richard
    I have the following nginx vhost config: server { listen 80 default_server; access_log /path/to/site/dir/logs/access.log; error_log /path/to/site/dir/logs/error.log; root /path/to/site/dir/webroot; index index.php index.html; try_files $uri /index.php; location ~ \.php$ { if (!-f $request_filename) { return 404; } fastcgi_pass localhost:9000; fastcgi_param SCRIPT_FILENAME /path/to/site/dir/webroot$fastcgi_script_name; include /path/to/nginx/conf/fastcgi_params; } } I want to redirect all requests that don't match files which exist to index.php. This works fine for most URIs at the moment, for example: example.com/asd example.com/asd/123/1.txt Neither of asd or asd/123/1.txt exist so they get redirected to index.php and that works fine. However, if I put in the url example.com/asd.php, it tries to look for asd.php and when it can't find it, it returns 404 instead of sending the request to index.php. Is there a way to get asd.php to be also sent to index.php if asd.php doesn't exist?

    Read the article

  • Black Screen on Logon (windows 7 home premium)

    - by Blacknight334
    i have been having some trouble with a dell Xps 15 laptop that i recently purchased. it is under a month old, and a problem has occurred, upon logging on just after start up, the computer will just sit on a black log on screen (with the mouse still visible and active) for a few minutes. it is extremely annoying, especially when im in a rush. the laptop is under a month old. So far, i have tried to update the drivers, all windows update, and still, nothing. also, it doesnt seem to do it when i log into safe mode, or if it does, it will do it for less than 10 seconds, then load the desktop (in normal boot, it usually takes a few minutes). i have also run a number of the inbuilt diagnostics, but found no errors. i want to avoid having to do a system restore for as long as i can. does anyone know anything that can help? (the laptop is running a 500gb SSD, 2gb Nvidia 640m, 8gb ram, 3rd gen i7 quad core with 8 threads) thanks.

    Read the article

  • How would I setup iMail to forward a user's mail to another service w/o leaving a copy locally?

    - by Scott Mayfield
    I have an iMail 2006 server installation in which I have a particular user that has several aliases that all point to a single user (me, for the record). I've been copying all of my mail to GMail and reading it there, but it annoys me that I have to go back weekly and log into my mail account on iMail and delete between 6 and 10 thousand copies of messages I've already received, in order to keep my mailbox from filling up (yes, I have it set with no quota, but I consider it bad form to just let the box grow indefinitely). I've got the copying setup via an inbound user rule, but I'm wondering how to accomplish a "copy and delete" rule. The manual isn't clear on what happens with multiple matching rules (will they be processed in order, or is it a first match situation?) and there isn't a means to combine multiple actions into a single rule. If I use the "forward" action, I THINK that it's going to screw up all the sender information once the mail reaches my GMail account and show it as coming from me instead of the original senders (can anyone confirm that this is accurate?) An easy answer would be to delete my user account entirely, replace it with an alias that maps to my GMail account, but then I would lose my ability to log into the system for admin duties. So that leads me to creating a second, lesser known account for admin use, but since it's a real account, sooner or later I'm going to get mail sent to it and I'll be back to the same situation of having a user account that doesn't get emptied periodically. I imagine I can set the quota to 0 MB to cause all incoming mail to my admin account to bounce, or setup an inbound rule to bounce everything, but this is starting to sound kludgy to me. Does anyone know of a more direct work around to copying a user's incoming mail to an outside server and then deleting the local copy w/o removing their account entirely? Or is this just wishful thinking? Thanks in advance. Scott

    Read the article

  • OS X: Storing MySQL data securely, on an encrypted FileVault image using a soft link

    - by GJ
    I am trying to get a macports-installed MySQL to use a data directory stored inside my FileVault-protected home dir. I used sudo cp -a /opt/local/var/db/mysql5 ~/db/ (the -a to ensure file permissions remain intact) and then replaced the original mysql5 directory with a soft link: sudo ln -s ~/db/mysql5 /opt/local/var/db/mysql5 However, when I now try to start MySQL it fails. It follows the soft link at least to the extent that it modifies some files in the ~/db/mysql5 dir, notably the error log which gets appended to it this: 110108 15:33:08 mysqld_safe Starting mysqld daemon with databases from /opt/local/var/db/mysql5 110108 15:33:08 [Warning] '--skip-locking' is deprecated and will be removed in a future release. Please use '--skip-external-locking' instead. 110108 15:33:08 [Warning] '--log_slow_queries' is deprecated and will be removed in a future release. Please use ''--slow_query_log'/'--slow_query_log_file'' instead. 110108 15:33:08 [Warning] '--default-character-set' is deprecated and will be removed in a future release. Please use '--character-set-server' instead. 110108 15:33:08 [Warning] Setting lower_case_table_names=2 because file system for /opt/local/var/db/mysql5/ is case insensitive 110108 15:33:08 [Note] Plugin 'FEDERATED' is disabled. 110108 15:33:08 [Note] Plugin 'ndbcluster' is disabled. /opt/local/libexec/mysqld: Table 'mysql.plugin' doesn't exist 110108 15:33:08 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110108 15:33:09 InnoDB: Started; log sequence number 4 1596664332 110108 15:33:09 [ERROR] /opt/local/libexec/mysqld: Can't create/write to file '/opt/local/var/db/mysql5/mac.local.pid' (Errcode: 13) 110108 15:33:09 [ERROR] Can't start server: can't create PID file: Permission denied 110108 15:33:09 mysqld_safe mysqld from pid file /opt/local/var/db/mysql5/gPod.local.pid ended I can't see why MySQL can't create the pid file, since manually creating it using the _mysql user succeeds (sudo -u _mysql touch mac.local.pid from inside ~/db/mysql5) Any ideas how to resolve this?

    Read the article

  • pdo_mysql installation

    - by Arsenal
    Hello, On my server I'm trying to instal PHP Projekt (6). This requires pdo_mysql however. I thought this installation of pdo_mysql would be rather straightforward... I tried using pecl (pecl install pdo_mysql) after installing devel etc, but this came up with a permission denied error. I solved this by using directories that were accessible. It then came up with a cant run C compiled programs however. It also says to check config.log for more details but ironically config.log is automatically removed if the installation process fails... When I try to compile and output a "hello world".c however, it works perfectly. I then tried to download the pdo_mysql stuff and install in myself (using configure and make install). This seemed to do the job, but when I restarted my apache ... no sign of pdo_mysql anywhere even though I adjusted my php.ini file I have read somewhere that you need to recompile PHP with the option pdo_mysql enabled. But how does one do that (I'm using CentOS4). And isn't there any other way than that??? Thanks!

    Read the article

  • Can not access SQLServer database

    - by btrey
    I'm trying to convert an Access database to use a SQLServer backend. I've upsized the database and everything works on the server, but I'm unable to access it remotely. I'm running SQLServer Express 2005 on Windows Server 2003. The server is not configured as a domain controller, nor connected to a domain. The computers I'm trying to access the server from are part of a domain, but there are no local domain controllers. I'm at a remote location and the computers are configured and connected to the domain at the home office, then shipped to us. We normally log in with cached credentials and VPN into the home office when we need to access the domain. I can use Remote Desktop Connection to access the 2k3 server which is running SQLServer. If I log into the server with my username, I can bring up the database, access it via the Trusted Connection, and the database works. If I try to run the database locally, however, I get the Server Login dialog box. I can not use a Trusted Connection because my local login is to the home office domain and is not recognized by the SQLServer machine. If I try to use the username/password that is local to the SQLServer, I get a login failed error. I've tried entering the username as "username", "workgroup/username" (where "workgroup" is the name of the workgroup on the SQLServer), "sqlservername/username" and "[email protected]" where "1.2.3.4" is the IP of the SQLServer. In all cases, I get a login failed error. As I said, I can login to the server via Remote Desktop Connection with the same username and password and use the database, so permissions for the username appear to be correct for both a remote connection and for database access. Not sure where to go from here and any assistance would be appreciated.

    Read the article

  • Export-Mailbox Error

    - by tuck918
    All, I am using export-mailbox to move some data and it is working fine until I get this error: StatusMessage : Error occurred in the step: Moving messages. Failed to copy messages to the destination mailbox store with error: MAPI or an unspecified service provider. ID no: 00000000-0000-00000000 This is the command I am using: export-mailbox -identity mailboxA -targetmailbox mailboxB -targetfolder folderA -allowmerge We are on SP2 and I am running this under an account that is not a domain or enterprise admin. THe account has Exchange Server Administrator Permission Both Source and Target Exchange Mailbox Server. THe account is part of the Local Administrators Group Member Both Source and Target Exchange Mailbox Server. This account has Full Access permission on both the target and source servers. THe issue happens at any time and I am only trying to run this on one mailbox, the only mailbox I need to run it on. THe event log is "Error Exchange Migration Export Mailbox Event 1008". The log under migration logs just shows that it was running okay then it gives the same error as above "Error was found for mailboxA ([email protected]) because: Error occurred in the step: Moving messages. Failed to copy messages to the destination mailbox store with error: MAPI or an unspecified service provider. ID no: 00000000-0000-00000000, error code: -1056749164" Any ideas on what to do/try?

    Read the article

  • How would I setup iMail to forward a user's mail to another service w/o leaving a copy locally?

    - by Scott Mayfield
    I have an iMail 2006 server installation in which I have a particular user that has several aliases that all point to a single user (me, for the record). I've been copying all of my mail to GMail and reading it there, but it annoys me that I have to go back weekly and log into my mail account on iMail and delete between 6 and 10 thousand copies of messages I've already received, in order to keep my mailbox from filling up (yes, I have it set with no quota, but I consider it bad form to just let the box grow indefinitely). I've got the copying setup via an inbound user rule, but I'm wondering how to accomplish a "copy and delete" rule. The manual isn't clear on what happens with multiple matching rules (will they be processed in order, or is it a first match situation?) and there isn't a means to combine multiple actions into a single rule. If I use the "forward" action, I THINK that it's going to screw up all the sender information once the mail reaches my GMail account and show it as coming from me instead of the original senders (can anyone confirm that this is accurate?) An easy answer would be to delete my user account entirely, replace it with an alias that maps to my GMail account, but then I would lose my ability to log into the system for admin duties. So that leads me to creating a second, lesser known account for admin use, but since it's a real account, sooner or later I'm going to get mail sent to it and I'll be back to the same situation of having a user account that doesn't get emptied periodically. I imagine I can set the quota to 0 MB to cause all incoming mail to my admin account to bounce, or setup an inbound rule to bounce everything, but this is starting to sound kludgy to me. Does anyone know of a more direct work around to copying a user's incoming mail to an outside server and then deleting the local copy w/o removing their account entirely? Or is this just wishful thinking?

    Read the article

  • How can I recover my system after running 'mkfs' on the system partition?

    - by Filip Podgórny
    I am not a Linux user, and was doing some homework, I blindly typed sudo mkfs ext3 dev/sda2 (I had Ubuntu as Windows installation). I've done few more things, and turned Ubuntu off to switch on Windows back. No operating system installed - this is the message I'm getting. I plugged my HDD onto another computer and all my files are still there. What should I do to get my windows installation back? df -l (before mkfs) /dev/loop0 29G 2,0G 27G 8% / udev 3,0G 4,0K 3,0G 1% /dev tmpfs 1,2G 900K 1,2G 1% /run none 5,0M 0 5,0M 0% /run/lock none 3,0G 1,3M 3,0G 1% /run/shm /dev/sda3 455G 123G 333G 27% /host /dev/sdb1 1,9G 820M 1,1G 43% /media/PHONE CARD mkfs output (polish, sorry) mke2fs 1.41.14 (22-Dec-2010) Etykieta systemu plików= Typ OS: Linux Rozmiar bloku=1024 (log=0) Rozmiar fragmentu=1024 (log=0) Stride=0 bloków, szerokosc Stripe=0 bloków 25688 i-wezlów, 102400 bloków 5120 bloków (5.00%) zarezerwowanych dla superuzytkownika Pierwszy blok danych=1 Maksymalna liczba bloków systemu plików=67371008 13 grup bloków 8192 bloków w grupie, 8192 fragmentów w grupie 1976 i-wezlów w grupie Kopie zapasowe superbloku zapisane w blokach: 8193, 24577, 40961, 57345, 73729 Zapis tablicy i-wezlów: zakonczono Tworzenie kroniki (4096 bloków): wykonano Zapis superbloków i podsumowania systemu plików: wykonano Ten system plików bedzie automatycznie sprawdzany co kazde 30 montowan lub co 180 dni, zaleznie co nastapi pierwsze. Mozna to zmienic poprzez tune2fs -c lub -i.

    Read the article

  • Very long (>300s) request processing time on Apache Server serving static content from particular IP

    - by Ron Bieber
    We are running an Apache 2.2 server for a very large web site. Over the past few months we have been having some users reporting slow response times, while others (including our resources, both on the internal network and our home networks) do not see any degradation in performance. After a ton of investigation, we finally found a "Deny from none" statement in our configuration that was causing reverse DNS lookups (which were timing out) that solved the bulk of our issues, but we still have some customers that we are seeing in the Apache logs (using %D in the log format) with request processing times of 300s for images, css, javascript and other static content. We've checked all Deny / Allow statements for reoccurrence of "none", as well as all other things we know of that would cause reverse DNS lookups (such as using "REMOTE_HOST" in rewrite rules, using %a instead of %h in our log format configuration) as well as verified that HostnameLookups is set to "Off". As an aside, we've also validated that reverse DNS lookups for folks having this problem do not time out - so I'm fairly certain DNS is not an issue in this case. I've run out of ideas. Are there any Apache configuration scenarios that someone can point me to that I might be missing that would cause request times for static content to take so long only for certain users? Thank you in advance.

    Read the article

  • Ubuntu Server attack? how to solve?

    - by saky
    Hello, Something (Someone) is sending out UDP packets sent from our whole ip range. This seems to be multicast DNS. Our server host provided this (Our IP Address is masked with XX): Jun 3 11:02:13 webserver kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:30:48:94:46:c4:08:00 SRC=193.23X.21X.XX DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 Jun 3 11:02:23 webserver kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:30:48:94:46:c4:08:00 SRC=193.23X.21X.XX DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 Jun 3 11:02:32 webserver kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:30:48:94:46:c4:08:00 SRC=193.23X.21X.XX DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 Jun 3 11:02:35 webserver kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:30:48:94:46:c4:08:00 SRC=193.23X.21X.XX DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 I checked my /var/log/auth.log file and found out that someone from China (Using ip-locator) was trying to get in to the server using ssh. ... Jun 3 11:32:00 server2 sshd[28511]: Failed password for root from 202.100.108.25 port 39047 ssh2 Jun 3 11:32:08 server2 sshd[28514]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.100.108.25 user=root Jun 3 11:32:09 server2 sshd[28514]: Failed password for root from 202.100.108.25 port 39756 ssh2 Jun 3 11:32:16 server2 sshd[28516]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.100.108.25 user=root ... I have blocked that IP address using this command: sudo iptables -A INPUT -s 202.100.108.25 -j DROP However, I have no clue about the UDP multicasting, what is doing this? who is doing it? and how I can stop it? Anyone know?

    Read the article

  • CentOS iscsi initiator has session but there is no block device

    - by jcalfee314
    I have installed the scsi-target-utils package on CentOS and I used it to perform a discovery. The discovery did give me an active session. I restarted the iscsi service but I do not see any new devices (fdisk -l). I see in /var/log/messages that my connection is operational now. I'm not sure how to debug this further. Can someone direct me into fixing this? discovery: iscsiadm -m discovery -t sendtargets -p 192.168.0.155 returns: 192.168.0.155:3260,-1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 Just to verify it actually worked: iscsiadm -m session returns tcp: [1] 192.168.0.155:3260,1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 restarting as the directions say to do: service iscsi restart output written to /var/log/message Stopping iscsi: Sep 20 12:14:22 localhost kernel: connection1:0: detected conn error (1020) [ OK ] Starting iscsi: Sep 20 12:14:22 localhost kernel: scsi1 : iSCSI Initiator over TCP/IP Sep 20 12:14:22 localhost iscsid: Connection1:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is shutdown. Sep 20 12:14:22 localhost iscsid: Could not set session2 priority. READ/WRITE throughout and latency could be affected. [ OK ] [root@db iscsi]# Sep 20 12:14:23 localhost iscsid: Connection2:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is operational now Ran a login command: iscsiadm -m node -T iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 -p 192.168.0.155 -l No errors, no logging occurred. Next I compared the output from "fdisk -l|egrep dev" both with the iscsi session and without. There is no difference. I suppose I could just look in /etc/mtab. Any ideas on how I can get an iscsi device?

    Read the article

  • Munin graphing by CGI

    - by Vaughn Hawk
    I have Munin working just fine, but any time I try to do cgi graphing - it just stops graphing... no errors in the log, nothing. I've followed the instructions here: http://munin-monitoring.org/wiki/CgiHowto - and it should be working - here's my munin.conf setup, at least the parts that matter: dbdir /var/lib/munin htmldir /var/www/munin logdir /var/log/munin rundir /var/run/munin tmpldir /etc/munin/templates graph_strategy cgi cgiurl /usr/lib/cgi-bin cgiurl_graph /cgi-bin/munin-cgi-graph And then the host info yada yada - graph_strategy cgi and cgrurl are commented out in munin.conf - that's because if I uncomment them, graphing stops working. Again, I get no errors in logs, just blank images where the graphs used to be. Comment out cgi? As soon as munin html runs again, everything is back to normal. I'm running the latest version of munin and munin-node - I've tried fastcgi and regular cgi - permissions for all of the directories involved are munin:www-data - and my httpd.conf file looks like this: ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory /usr/lib/cgi-bin/> AllowOverride None SetHandler fastcgi-script Options ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> <Location /cgi-bin/munin-cgi-graph> SetHandler fastcgi-script </Location> Does anyone have any ideas? Without this working, at least from what I understand, Munin just graphs stuff, even if no one is looking at them - you add 100 servers to graph, and this starts to become a problem. Hope someone has ran into this and can help me out. Thanks!

    Read the article

  • Attempting to set up xampp and zend server on the same machine

    - by umbregachoong
    I am attempting to set up the zend server and xampp on the same machine but I am running into problems. I came across documentation on the zend site that said you cannot do this. However the folks over at apachefriends said you can. I have since discovered that I can run some of the zendframework examples within xampp by downloading the zendframework2 library and the skeleton app from git and I am doing this right now. However, I would like to know how to set them both up without having any conflicts both for the apache2 server and phpmyadmin. (One of the frustrating things is trying to load phpmyadmin in the deployment dialog by using the zpk tool in Zend). What I did in trying to set up both servers on windows 7 is as follows: First I have tried to set up the httpd conf files separately for each server, xampp running on port 8082 , and zend running on port 8088. At the time xampp would work, but zend server would not. This is after setting up the virtual host files separately for each server. Question 1: Where are the zend server error logs? Earlier, I was able to get both of them running configuring the xampp server httpd-conf file alone, however, I experienced problems with phpmyadmin even after configuring phpmyadmin on xampp to work on a different port other than 3306. Second question here: how to set up the two mysql phpmyadmin instances so they do not conflict with each other? Here is the xampp virtual host section: ##ServerAdmin [email protected] DocumentRoot "C:/xampp/htdocs/" ServerName localhost 8082 ##ServerAlias www.dummy-host.example.com ##ErrorLog "logs/dummy-host.example.com-error.log" ##CustomLog "logs/dummy-host.example.com-access.log" common Here is the zend virtual host section: DocumentRoot "C:\Program Files (x86)\Zend\Apache2/htdocs" ServerName localhost:8088 </VirtualHost> I have looked at this httpd.apache.org/docs/2.2/vhosts/ and this http://survivethedeepend.com/zendframeworkbook/en/1.0/creating.a.local.domain.using.apache.virtual.hosts but I am obviously doing something wrong here. I also have the java sdk running on this machine with tomcat and apache and I have no conflicts- too bad this is not the case for zend server and xampp Thanks umbre gachoong

    Read the article

  • Apache taking up a lot of CPU while running request-tracker4

    - by bhowmik
    I am trying out a request-tracker installation on an EC2 micro instance. The specs for the micro instance are as follows 1) Ubuntu 12.04 64bit, 613MB RAM, 8GB Hard Drive 2) Running request-tracker 4.0.4 from the repository, perl 5.14.2, Apache2, MySQL5 3) Request-tracker4.0.4 running with mod_perl2 and Worker mpm 4) Apache configured with Worker MPM. Config snippet given below Timeout 150 KeepAlive On MaxKeepAliveRequests 60 KeepAliveTimeout 2 <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> Now when I start Apache2 it works fine for some time and after a while the CPU load shoots up to 99% or more. Usually it is one or more Apache processes doing this. I've tried a to modify the worker module configuration without any luck. The log files for both Apache2 and request-tracker4 are set to log debug messages and don't show anything to indicate what could be causing this. The system gets a maximum of 5 users at any given time and usually (90% of the time) it is just 2. I've just installed it and we only have 20 tickets in the database. I don't think its the memory thats causing the issue since the server isn't swapping or even close to it and I hardly see the memory usage go up. Would appreciate any pointers on how to go about troubleshooting this. In case it helps I've also tried this out a similar installation on a small instance (Identical settings except RAM bumped upto 1.7GB) and I still see the issue.

    Read the article

  • ubuntu 9.10 installer doesn't recognize the hard drive

    - by dan
    I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

    Read the article

  • dovecot/postfix: can send & receive via webmin, however squirrel mail and outlook fail to connect

    - by Jonathan
    I have just finished setting up dovecot and postfix on my server (centos 5.5/apache) earlier today. So far I've been able to get email working through webmin (can send/receive to and from external domains). However, attempting to telnet xxx.xxx.xx.xxx 110 returns the following errors: Connected to xxx.xxx.xx.xxx. Escape character is '^]'. +OK Dovecot ready. USER mailtest +OK PASS ********* +OK Logged in. -ERR [IN-USE] Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2011-02-11 22:55:48] Connection closed by foreign host. Which further logs the following error dovecot: Feb 11 21:32:48 Info: pop3-login: Login: user=, method=PLAIN, rip=::ffff:xxx.xxx.xx.xxx, lip=::ffff:xxx.xxx.xx.xxx, TLS dovecot: Feb 11 21:32:48 Error: POP3(mailtest): stat(/home/mailtest/MailDir/cur) failed: Permission denied dovecot: Feb 11 21:32:48 Error: POP3(mailtest): stat(/home/mailtest/MailDir/cur) failed: Permission denied dovecot: Feb 11 21:32:48 Error: POP3(mailtest): Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2011-02-11 21:32:48] dovecot: Feb 11 21:32:48 Info: POP3(mailtest): Couldn't open INBOX top=0/0, retr=0/0, del=0/0, size=0 Also, when attempting to login to squirrelmail or access the account via thunderbird/live mail etc, it obviously fails with a similar issue. Any suggestions or outside thinking on this would be a massive help! I've pretty much exhausted every resource, and tried every suggestion for my dovecot.conf file, but so far nothing seems to work :( I feel like it may be a permissions/ownership issue, but i'm lost as to specifics.

    Read the article

  • VSFTPD - FTP over TLS - Upload stops after exactly 82k?

    - by Redsandro
    I installed a VSFTP daemon on a CentOS server, using a RSA certificate for logging in using explicit TLS. Now, I cannot upload more than 82k. With files under that limit, there is no problem. The FTP works like a charm. But as soon as a file reaches 82k with FileZilla (81,952 bytes to be exact), the transfer will stop, and the FTP client hangs until time out is reached. FTP client console: 15:10:21 Command: STOR jquery-1.7.2.min.js 15:10:21 Response: 150 Ok to send data. 15:11:21 Error: Connection timed out 15:11:21 Error: File transfer failed after transferring 82 KB in 60 seconds /var/log/vsftpd.log FTP command: Client "x.x.x.x", "STOR jquery-1.7.2.min.js" FTP response: Client "x.x.x.x", "150 Ok to send data." OK UPLOAD: Client "x.x.x.x", "jquery-1.7.2.min.js", 81952 bytes, 1.32Kbyte/sec FTP response: Client "x.x.x.x", "226 File receive OK." // NOT okay, file is bigger // No mention of error here I cannot find relevant info about this problem, apart from a possible problem with trans_chunk_size (not mentioned in default config), but I tried different sizes and it has no impact on the problem. trans_chunk_size=4096 trans_chunk_size=8192 trans_chunk_size=9999 Ofcourse, after every configuration change, I restarted the server: /etc/init.d/vsftpd restart What else can cause this? It's not the latest version, but it's the latest update within the repositories that has been deemed fit for enterprise usage: Package info: $ yum info vsftpd Loaded plugins: fastestmirror Installed Packages Name : vsftpd Arch : x86_64 Version : 2.0.5 Release : 24.el5_8.1 Size : 286 k Repo : installed Summary : vsftpd - Very Secure Ftp Daemon URL : http://vsftpd.beasts.org/ License : GPL Description: vsftpd is a Very Secure FTP daemon. It was written completely from scratch.

    Read the article

  • Using gitlab behind Apache proxy all generated urls are wrong

    - by Hippyjim
    I've set up Gitlab on Ubuntu 12.04 using the default package from https://about.gitlab.com/downloads/ {edit to clarify} I've set up Apache to proxy and run the nginx server the package installed on port 8888 (or so I thought). As I had Apache installed already I have to run nginx on localhost:8888. The problem is, all images (such as avatars) are now served from http://localhost:8888, and all the checkout urls Gitlab gives are also localhost - instead of using my domain name. If I change /etc/gitlab/gitlab.rb to use that url, then Gitlab stops working and gives a 503. Any ideas how I can tell Gitlab what URL to present to the world, even though it's really running on localhost? /etc/gitlab/gitlab.rb looks like: # Change the external_url to the address your users will type in their browser external_url 'http://my.local.domain' redis['port'] = 6379 postgresql['port'] = 2345 unicorn['port'] = 3456 and /opt/gitlab/embedded/conf/nginx.conf looks like: server { listen localhost:8888; server_name my.local.domain; [Update] It looks like nginx is still listening on the wrong port if I don't specify localhost:8888 as the external_url. I found this in /var/log/gitlab/nginx/error.log 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: still could not bind() Apache setup looks like: <VirtualHost *:80> ServerName my.local.domain ServerSignature Off ProxyPreserveHost On AllowEncodedSlashes NoDecode <Location /> ProxyPass http://localhost:8888/ ProxyPassReverse http://127.0.0.1:8888 ProxyPassReverse http://my.local.domain </Location> </VirtualHost> Which seems to proxy everything back ok if Gitlab listens on localhost:8888 - I just need Gitlab to start displaying the right URL, instead of localhost:8888.

    Read the article

  • Tracking down the cause of a web service fault running in IIS

    - by BG100
    I have built a web service in Visual Studio 2008, and deployed it on IIS 7 running on Windows Server 2008 R2. It has been extensively tested, handles all errors gracefully and logs any uncaught errors to a file using log4net. The system normally runs perfectly, but occasionally (2 or 3 times a day) a fault occurs and screws up the application which needs an iisreset to get it working again. When the fault occurs I get some random errors that are caught by my catch-all error log, such as: Value cannot be null. Could not convert from type 'System.Boolean' to type 'System.DateTime'. Sequence contains no elements These errors are raised on every request until I manually do an iisreset, but there is no sight of them when the system is running normally. The web service is a stateless request-response application. Nothing is stored in the session. It could be load related, but I doubt it as there are only around 30 or 40 requests per minute. This is proving very tricky to track down. I can't work out what is putting IIS into this bad state, and why it needs an iisreset to get it working again. Nothing is reported in the event log. Can anyone suggest how to enable more extensive logging that might catch this fault? Also, does anyone know what might be causing the problem?

    Read the article

  • How to get nginx to pass HTTP_AUTHORIZATION header to Apache

    - by codeinthehole
    Am using Nginx as a reverse proxy to an Apache server that uses HTTP Auth. For some reason, I can't get the HTTP_AUTHORIZATION header through to Apache, it seems to get filtered out by Nginx. Hence, no requests can authenticate. Note that the Basic auth is dynamic so I don't want to hard-code it in my nginx config. My nginx config is: server { listen 80; server_name example.co.uk ; access_log /var/log/nginx/access.cdk-dev.tangentlabs.co.uk.log; gzip on; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_read_timeout 120; location / { proxy_pass http://localhost:81/; } location ~* \.(jpg|png|gif|jpeg|js|css|mp3|wav|swf|mov|doc|xls|ppt|docx|pptx|xlsx|swf)$ { if (!-f $request_filename) { break; proxy_pass http://localhost:81; } root /var/www/example; } } Anyone know why this is happening? Update - turns out the problem was something I had overlooked in my original question: mod_wsgi. The site in question here is a Django site, and it turns out that Apache does get the auth variables passed through, however mod_wsgi filters them out. The resolution is to use: WSGIPassAuthorization On See http://www.arnebrodowski.de/blog/508-Django,-mod_wsgi-and-HTTP-Authentication.html for more details

    Read the article

  • OS X: MySQL not dealing properly with data directory via soft link

    - by GJ
    I am trying to get a macports-installed MySQL to use a data directory stored inside my FileVault-protected home dir. I used sudo cp -a /opt/local/var/db/mysql5 ~/db/ (the -a to ensure file permissions remain intact) and then replaced the original mysql5 directory with a soft link: sudo ln -s ~/db/mysql5 /opt/local/var/db/mysql5 However, when I now try to start MySQL it fails. It follows the soft link at least to the extent that it modifies some files in the ~/db/mysql5 dir, notably the error log which gets appended to it this: 110108 15:33:08 mysqld_safe Starting mysqld daemon with databases from /opt/local/var/db/mysql5 110108 15:33:08 [Warning] '--skip-locking' is deprecated and will be removed in a future release. Please use '--skip-external-locking' instead. 110108 15:33:08 [Warning] '--log_slow_queries' is deprecated and will be removed in a future release. Please use ''--slow_query_log'/'--slow_query_log_file'' instead. 110108 15:33:08 [Warning] '--default-character-set' is deprecated and will be removed in a future release. Please use '--character-set-server' instead. 110108 15:33:08 [Warning] Setting lower_case_table_names=2 because file system for /opt/local/var/db/mysql5/ is case insensitive 110108 15:33:08 [Note] Plugin 'FEDERATED' is disabled. 110108 15:33:08 [Note] Plugin 'ndbcluster' is disabled. /opt/local/libexec/mysqld: Table 'mysql.plugin' doesn't exist 110108 15:33:08 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110108 15:33:09 InnoDB: Started; log sequence number 4 1596664332 110108 15:33:09 [ERROR] /opt/local/libexec/mysqld: Can't create/write to file '/opt/local/var/db/mysql5/mac.local.pid' (Errcode: 13) 110108 15:33:09 [ERROR] Can't start server: can't create PID file: Permission denied 110108 15:33:09 mysqld_safe mysqld from pid file /opt/local/var/db/mysql5/gPod.local.pid ended I can't see why MySQL can't create the pid file, since manually creating it using the _mysql user succeeds (sudo -u _mysql touch mac.local.pid from inside ~/db/mysql5) Any ideas how to resolve this?

    Read the article

  • Windows XP only loads in VGA mode, and crashes when raising resolution

    - by Harel
    My kid's computer (Windows XP, SP3) started to (what appears to be) crash on boot. It will only boot in Safe or VGA mode, and if I try to raise the resolution from 640x480 it just reboots itself, and a error appears in the Event Log. When it loads up not in VGA mode, the monitor shuts off just after the windows logo is shown. It seems like windows is actually running but I can't see anything on screen (monitor is off for lack of signal). Nothing was installed recently that I know of, short of the usual windows updates. Thanks, Harel Below is the event log error: Event Type: Error Event Source: System Error Event Category: (102) Event ID: 1003 Date: 15/04/2012 Time: 16:27:11 User: N/A Computer: ----- Description: Error code 1000008e, parameter1 c0000005, parameter2 f745b0bf, parameter3 ede24f98, parameter4 00000000. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 53 79 73 74 65 6d 20 45 System E 0008: 72 72 6f 72 20 20 45 72 rror Er 0010: 72 6f 72 20 63 6f 64 65 ror code 0018: 20 31 30 30 30 30 30 38 1000008 0020: 65 20 20 50 61 72 61 6d e Param 0028: 65 74 65 72 73 20 63 30 eters c0 0030: 30 30 30 30 30 35 2c 20 000005, 0038: 66 37 34 35 62 30 62 66 f745b0bf 0040: 2c 20 65 64 65 32 34 66 , ede24f 0048: 39 38 2c 20 30 30 30 30 98, 0000 0050: 30 30 30 30 0000

    Read the article

  • my X server doesn't load a module called "glx", but my video drivers seem to be installed

    - by rumtscho
    I just got a new, very wide monitor (2560x1440) and there is no sense maximizing my applications. So I installed Compiz Config Settings Manager and enabled Grid. Nothing happened, the shortcuts don't move application windows. Went to System - Preferences - Appearance, the Visual effects tab. It at "disabled". When I try to set them to "normal" or "extra", a message box appears telling me that it's searching for video drivers, then disappears, and I get an error message "Desktop effects could not be enabled". I opened Xorg.0.log, and had errors there: (EE) Failed to load /usr/lib/xorg/modules/extensions//libglx.so (II) UnloadModule: "glx" (EE) Failed to load module "glx" (loader failed, 7) (II) LoadModule: "extmod" Going to Administration - System - Hardware drivers, it said that there are no available and/or installed hardware drivers. But apt-get said that it cannot install nvidia-glx-185, as it is already installed. Googling my error message suggested that I install and run something called envyng. This let me install the nvidia drivers again, and now I can see in the Hardware Drivers window that they are installed and active. But the error message in Xorg.0.log remains, and I still cannot enable the Compiz effects or use Grid. Now, I don't have enough Linux experience to understand if this is a single cause-effect-chain of problems, or three independent ones, but I'd appreciate help for any of them. I am running Ubuntu 9.10, the video card is a GeForce 7600GS.

    Read the article

  • Postfix (delivery temporarily suspended: conversation with mydomain.net [private/lmtp] timed out while receiving the initial server greeting)

    - by Paul
    I'm running Debian 7.1, Postfix version 2.9.6, Dovecot Version 2.1.7 To set it up I followed mostly this (without the spamass-clamav-greylist bit) I have also got setup smart host relaying via gmail postconf -n reveals: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 milter_default_action = accept mydestination = MyDomain, localhost.net, localhost myhostname = MyDomain.net mynetworks = 127.0.0.0/8 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relay_domains = mysql:/etc/postfix/mysql_relay_domains.cf relayhost = [smtp.gmail.com]:587 smtp_connect_timeout = 120s smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/relay_passwd smtp_sasl_security_options = noanonymous smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unauth_destination, reject_unauth_pipelining, reject_invalid_hostname smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes virtual_alias_maps = mysql:/etc/postfix/mysql_virtual_alias_maps.cf virtual_gid_maps = static:3000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = mysql:/etc/postfix/mysql_virtual_mailbox_domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf virtual_transport = lmtp:unix:private/lmtp virtual_uid_maps = static:3000 I am able to send emails to the outside world but all emails sent to me are getting stuck. mailq is showing numerous lines: A69C2414C4 2621 Fri Dec 27 14:57:03 [email protected] (conversation with MyDomain.net[private/lmtp] timed out while receiving the initial server greeting) [email protected] AB78B414BE 3796 Fri Dec 27 14:56:50 [email protected] (delivery temporarily suspended: conversation with MyDomain.net[private/lmtp] timed out while receiving the initial server greeting) [email protected] /var/log/mail.log is showing: Dec 28 09:50:09 hostname postfix/lmtp[10828]: E947C414CD: to=, relay=localhost[private/lmtp], delay=64012, delays=63712/0.25/300/0, dsn=4.4.2, status=deferred (conversation with localhost[private/lmtp] timed out while receiving the initial server greeting) Any help would be greatly appreciated. Thank you

    Read the article

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >