Search Results

Search found 7850 results on 314 pages for 'except'.

Page 269/314 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

  • Windows 7 file-based backup service

    - by Ben Voigt
    I'm looking for a good replacement for Lazy Mirror, since it doesn't support Windows 7 well. Pros: One of the things I really loved about Lazy Mirror is that it always maintains a "full" backup, but does so by only copying modified files. As each file was copied, the old version got archived (moved to an out-of-the-way location). So after mirroring ran, there'd be a complete copy of the file system, which could even be booted if necessary. At the same time, extra space on the backup media was used to store as many older versions of files as possible, without wasting space storing multiple copies of the same version. It seems that with Windows 7 backup, there'd be wasted space storing the same data in both the system image and file backup. It was completely file-based, but also aware of the registry (it had a feature to dump the live registry to hive files in the correct format). The backups were normal NTFS filesystems, no special tool was needed to read them. It automatically cleaned out the oldest previous versions when space ran out (unlike Windows 7 backup which apparently simply starts failing the the backup media fills.) It copied all file attributes including security. Cons: It doesn't deal well with junction points, symbolic links, and hard links. It didn't run as a service without lots of help from firesrv or srvany, and then you couldn't interact with the GUI. Running as a service was necessary to be able to mirror protected OS files. It didn't have open file handling, except for registry hives. I guess that the file-by-file archive and replacement could leave mismatched sets of files, if the mirror was interrupted. This would be the advantage of incremental backup techniques that require old full backup + all intermediate incremental backups to restore. But I don't see this as presenting much of a problem, you'd really only have a boot failure if you had a mixture of pre- and post-service pack files, and I can run a full image backup using another tool before applying a service pack. Does anyone know of a tool that does both full-system backup and storage of old versions of files like Lazy Mirror did (without storing the same data multiple times), and also can run as a service in Windows 7? Free is best of course, but a reasonably priced paid program (e.g. It would be absolutely awesome if it also triggered a backup/mirror pass when a particular external drive was plugged in and generated popup warnings if backups hadn't been run recently)

    Read the article

  • Log - Server kernel: INFO: task httpd:000000 blocked for more than 120 seconds

    - by valter
    Almost everyday my server is crashing due to hight server load, and even restarting apache or mysql can't solve the problem. I need to reboot the server to solve, or it crash again due to the high load. The log system records something like this when it crashes: Aug 11 18:33:53 server kernel: INFO: task httpd:20008 blocked for more than 120 seconds. Aug 11 18:33:53 server kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 11 18:33:53 server kernel: httpd D ffffffff801538ac 0 20008 5816 20066 19809 (NOTLB) Aug 11 18:33:53 server kernel: ffff81025a299dc8 0000000000000082 ffff81033b4c0740 ffffffff80009a14 Aug 11 18:33:53 server kernel: ffff8101063f8d80 0000000000000009 ffff8100b758f7e0 ffff8101c57187e0 Aug 11 18:33:53 server kernel: 00009436d4100b6c 000000000001d50f ffff8100b758f9c8 000000083b531588 Aug 11 18:33:53 server kernel: Call Trace: Aug 11 18:33:53 server kernel: [<ffffffff80009a14>] __link_path_walk+0x173/0xfb9 Aug 11 18:33:53 server kernel: [<ffffffff8002cc16>] mntput_no_expire+0x19/0x89 Aug 11 18:33:53 server kernel: [<ffffffff80063c4f>] __mutex_lock_slowpath+0x60/0x9b Aug 11 18:33:53 server kernel: [<ffffffff80023908>] __path_lookup_intent_open+0x56/0x97 Aug 11 18:33:53 server kernel: [<ffffffff80063c99>] .text.lock.mutex+0xf/0x14 Aug 11 18:33:53 server kernel: [<ffffffff8001b21f>] open_namei+0xea/0x712 Aug 11 18:33:54 server kernel: [<ffffffff8002768a>] do_filp_open+0x1c/0x38 Aug 11 18:33:54 server kernel: Firewall: *UDP_IN Blocked* IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:30:48:9e:6e:99:08:00 SRC=208.43.135.158 DST=255.255.255.255 LEN=151 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=38354 DPT=6112 LEN=131 Aug 11 18:33:54 server kernel: [<ffffffff8001a061>] do_sys_open+0x44/0xbe Aug 11 18:33:54 server kernel: [<ffffffff8005d28d>] tracesys+0xd5/0xe0 I googled a lot trying to find a solution. But it looks that the solution is just to update the kernel or disk driver, thinks that I don't know how to do. In this url http://bugs.centos.org/view.php?id=4515 a lot o people report similar problems, except the fact that they are not related to httpd like mine. According to one member, one solution would be to add "elevator=noop " to /etc/grub.conf like in this example: title CentOS (2.6.18-238.12.1.el5xen) root (hd0,0) kernel /vmlinuz-2.6.18-238.12.1.el5xen ro root=/dev/VolGroup00/LogVol00 elevator=noop initrd /initrd-2.6.18-238.12.1.el5xen.img Would this really solve the problem? My disk are working in RAID. Can this cause some problem to my server? Is there any other solution?

    Read the article

  • Small Business Server services will not start, and remote desktop and UAC are broken

    - by Stephen Jennings
    Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

    Read the article

  • Cisco IPSec, nat, and port forwarding don't play well together

    - by Alan
    I have two Cisco ADSL modems configured conventionally to nat the inside traffic to the ISP. That works. I have two port forwards on one of them for SMTP and IMAP from the outside to the inside this provides external access to the mail server. This works. The modem doing the port forwarding also terminates PPTP VPN traffic. There are two DNS servers one inside the office which resolves mail to the local address, one outside the office which resolves mail for the rest of the world to the external interface. That all works. I recently added an IPSec VPN between the two modems and that works for every thing EXCEPT connections over the IPSec VPN to the mail server on port 25 or 143 from workstations on the remote lan. It would seem that the modem with the port forwards is confusing traffic from the mail server destined for a machine on the other side of the IPSec VPN for traffic that should go back to a port forward connection. PPTP VPN traffic to the mail server is fine. Is this a scenario anybody is familiar with and are there any suggestions on how to work around it? Many thanks Alan But wait there is more..... This is the strategic parts of the nat config. A route map is used to exclude the lans that are reachable via IPSec tunnels from being Nated. int ethernet0 ip nat inside int dialer1 ip nat outside ip nat inside source route-map nonat interface Dialer1 overload route-map nonat permit 10 match ip address 105 access-list 105 remark *** Traffic to NAT access-list 105 deny ip 192.168.1.0 0.0.0.255 192.168.9.0 0.0.0.255 access-list 105 deny ip 192.168.1.0 0.0.0.255 192.168.48.0 0.0.0.255 access-list 105 permit ip 192.168.1.0 0.0.0.255 any ip nat inside source static tcp 192.168.1.241 25 interface Dialer1 25 ip nat inside source static tcp 192.168.1.241 143 interface Dialer1 143 At the risk of answering my own question, I resolved this outside the Cisco realm. I bound a secondary ip address to mail server 192.168.1.244, changed the port forwards to use it while leaving all the local and IPSec traffic to use 192.168.1.241 and the problem was solved. New port forwards. ip nat inside source static tcp 192.168.1.244 25 interface Dialer1 25 ip nat inside source static tcp 192.168.1.244 143 interface Dialer1 143 Obviously this is a messy solution and being able to fix this in the Cisco would be preferable.

    Read the article

  • Where to get laptop replacement parts?

    - by wai
    I am sure some of us have older laptops that still works but just one or two parts started not working very well. However, to send it back to the manufacturer for repair might not be worth the money (as some of them even charge consultation fees just to have it checked) as these old laptops are most probably well beyond warranty. Replacing these one or two parts could give your laptop a new lease of life. For example, I have a Dell Inspiron 640m which the fan recently failed. Everything else still works. I know enough to open up the laptop (after reading the service manual) and put it back together again, hence a replacement fan could save it. However, finding these parts turned out to be difficult. I guess I wouldn't be able to get it from Dell since I have been searching around the Dell forums and concluded if I were going to get Dell to at least talk to me, I would have to pay some money (since my warranty expired). I found this online:- http://www.parts-people.com/index.php?action=item&id=3725 However, as I don't live in the United States, shipping alone would cost me 3 times more than the part in question. In addition, if there's a problem, it would be difficult because I probably would have to mail the parts back (costing more money). One of my friend spilled water on her Macbook, she sent it back to Apple and they told her the cost of repairing it exceeds that of buying a new Macbook. They probably have to change everything except the LCD screen. I opened it up and found that most of the parts are still working, only the RAM had fried. Replaced it and it's working again. For some time before discovering only the RAM fried, I was toying with the idea of replacing the logic board myself but looks like I didn't have to. =) Now I know there's a site for Macbooks used replacement parts:- http://www.ifixit.com/ The question is, does anyone know where to get replacement parts at their own locality? It might benefit the community as a whole. Someone might know a local computer store that sells precisely just the things we needed (for now, I hope to find a shop that sells just the fan). If you own a laptop which you had an easy experience finding the replacement parts, do post that as well. PS: I wish laptop manufacturers have outlets where they sell these replacement parts (or at least let you place an order).

    Read the article

  • File open fails initially when trying to open a file located on a win2k8 share but eventually can su

    - by Ruddy Douglass
    Core of the problem: I receive "(0x80070002) The system cannot find the file specified" for roughly 8 to 9 seconds before it can open it successfully. In a nutshell, we have two COM components. Component A calls into Component B and asks for a UNC filename to write to - the filename returned doesn't exist yet, but the path does - it then does its work, creates and populates the file, and tells Component B its done by making another com call. At that point Component B will call MoveFile to rename the file to its "official" name. This code has worked for (literally) years. Its works fine on win2k3. Its works fine when its running on win2k8 and points to a share on a win2k3 server. It also runs fine, if the share is actually located on the same win2k8 machine that the code is running on. But if you run it on win2k8 and point it to a share on a different win2k8 server, it fails. Both Component A & component B exist in their own Windows Service running with as a domain admin account. The shares are configured for "Everyone/Full control" in all test environments, similarly so are the underlying folders that the share points to. All machines are in the same domain. During debugging I realized the file actually does exist by the time I get to checking manually for it - after several iterations it occurred to me that the file doesn't "show up" until some delay passes by - so I put in the loop below in component B as shown below: int nCounter = 0; while (true) { CFileStatus fs; if (CFile::GetStatus(tempname, fs)) break; SleepEx(100, FALSE); nCounter++; } This code does, in fact, exit and nCounter is generally between 80 & 90 iterations when it does -- indicating the file "appears" approx 8 to 9 seconds later. Once that loop exits the code can successfully rename the file and all further processing appears to work. I put a CFile::GetStatus in component A immediately before it calls into Component B and that indicates success - it can see the file and get its true size yet the call into component b made immediately after can not see the file until the above indicated delay passes. I have verified the pathnames are precisely the same, even though it would clearly have to be for the calls to eventually succeed after a pause of 8 to 9 seconds... When something like this occurs I always assume there is a bug in my code until proven otherwise, but given (a) this code has executed properly for a very long time and (other than my diagnostic loop added) has not changed, and (b) it works in all environments except the win2k8 - win2k8 share, I'm guessing there is some OS issue in here that i do not understand. Any insight would be helpful. Thanks!

    Read the article

  • usb mouse connecting and disconnecting randomly and often

    - by Kalec
    Yes, I know this question has been asked here before but I can't add to the discussion over there and it did not help me, so here goes nothing. I've bought an acer aspire 5742G about 2 months ago or so and it's been running great, but sometimes I used to hear the windows error beep but I had no idea what was causing it since the "bug" was automatically fixed so fast I couldn't even see an error message (also it kinda always happened when I was busy also, either in a game or while doing my homework). Later on my mouse would simply not work for 3-5 seconds then work again, I thought nothing of it at the time. I also had a problem where it only worked in one usb and one only ... to move it I had to remove the battery, unplug the laptop and hold the power button for 2 minutes to reset the bios settings. Since today though it went nuts ... sometimes it disconnects / reconnects 12 times in 10 seconds and windows just keeps beeping till I unplug it, then it runs smooth for 5-6 minutes then it goes nuts again. Other times it seems like it skips (disconnects for a fraction of a second) other times just for 2-3 seconds. But this is incredibly frustrating. Sometimes the power just goes down (the laser turns off) and well that at least I would understand but this is a rare occurance. Now I know the usb ports work since I have a lot of other devices connected and I tried the mouse on a room m8's laptop so the mouse also works. My only conclusion is that it's an operating system / settings bug and / or problem (I have tried the mouse in all ports by the way). All drivers and bios are up to date (maybe except mouse but i can't seem to update that and the mouse has no name, just a serial number which helps with nothing. Still it worked till today and nothing should have changed any way). I have made sure windows can't shut it down to save power (in device management). Also I tried to delete the drivers and re-install them, rebooting and the power button trick but nothing ... most I have done is get rid of the 12 discconnects / reconnects every 10 seconds :) but that's all :( I would buy a new one but I'm afraid it might do the same thing :| ****EDIT****** Tried the mouse again at a friend but now it didn't even install it's software nor did the update work ... think I'll just buy a new one but I'd still like a suggestion at least so I'll leave this open

    Read the article

  • Windows 8 ignores more specific route

    - by Lander
    OS: Windows 8 I have a cabled NIC (connected to router with ip 192.168.1.0) and a WIFI NIC (connected to a router with ip 192.168.1.1) . I want all traffic to go through the cabled NIC, except the 192.168.1.0/8 range should use the wifi-nic. This was working fine in Windows 7, without any manual configuration. In Windows 8 however, it's not. My routing table: =========================================================================== Interface List 14...f2 7b cb 13 e7 f0 ......Microsoft Wi-Fi Direct Virtual Adapter 13...b8 ac 6f 54 d2 5c ......Realtek PCIe FE Family Controller 12...f0 7b cb 13 e7 f0 ......Dell Wireless 1397 WLAN Mini-Card 1...........................Software Loopback Interface 1 15...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.198 30 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.233 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.233 276 192.168.0.233 255.255.255.255 On-link 192.168.0.233 276 192.168.0.255 255.255.255.255 On-link 192.168.0.233 276 192.168.1.0 255.255.255.0 192.168.1.1 192.168.1.198 31 192.168.1.198 255.255.255.255 On-link 192.168.1.198 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.0.233 276 224.0.0.0 240.0.0.0 On-link 192.168.1.198 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.0.233 276 255.255.255.255 255.255.255.255 On-link 192.168.1.198 286 =========================================================================== Persistent Routes: None I added the rule for 192.168.1.0. I would think Windows should use this rule for the IP 192.168.1.1 because it's more specific than the default-route. However it's not: C:\Windows\system32>tracert 192.168.1.1 Tracing route to 192.168.1.1 over a maximum of 30 hops 1 58 ms 4 ms 4 ms 192.168.0.1 2 68 ms 12 ms 11 ms ^C So... What do I do wrong? And how can I make Windows use the wireless NIC for 192.168.1.0/8

    Read the article

  • Unable to commit file through svn, server sent truncated HTTP response body

    - by Rocket3G
    I have my own VPS, on which I want to run a simple SVN + chiliproject setup. I have re-installed SVN, CHILI and the OS several times, and it always works for a couple of hours/days and then it just stops working. Well, everything works, except I can't upload any files. Committing directories seems to work just fine, but when I try to commit a file it breaks. I have an error log file, which gives me the following text when I try to commit something x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "OPTIONS /project HTTP/1.1" 200 149 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "PROPFIND /project HTTP/1.1" 207 346 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "MKACTIVITY /project/!svn/act/c11d45ac-86b6-184a-ac5a-9a1105d64563 HTTP/1.1" 401 345 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "MKACTIVITY /project/!svn/act/c11d45ac-86b6-184a-ac5a-9a1105d64563 HTTP/1.1" 201 262 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "PROPFIND /project HTTP/1.1" 207 236 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "CHECKOUT /project/!svn/vcc/default HTTP/1.1" 201 271 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "PROPPATCH /project/!svn/wbl/c11d45ac-86b6-184a-ac5a-9a1105d64563/1 HTTP/1.1" 207 267 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "CHECKOUT /project/!svn/ver/1 HTTP/1.1" 201 271 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "HEAD /project/index.html HTTP/1.1" 404 - x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "PUT /project/!svn/wrk/c11d45ac-86b6-184a-ac5a-9a1105d64563/index.html HTTP/1.1" 201 269 x.x.x.x - admin [19/Oct/2013:00:02:04 +0200] "DELETE /project/!svn/act/c11d45ac-86b6-184a-ac5a-9a1105d64563 HTTP/1.1" 204 - So it seems that it PUTs the file (test.html) correctly, and somehow somewhere something is wrong (file permissions are alright, when I purposely stated that they are wrong, it gave me errors, which is expected, and they were about the file permissions being incorrect. The odd thing is that files won't get added, but directories are fine. I also have enough storage left on my machine. What I should note, perhaps, is that I use Ubuntu 12.04.3 with ruby 1.9.3, mysql 14.14 and I have it set up that Chiliproject handles the authentication and authorization for the project. It works, because I can commit directories and read it all correctly, though I can't upload files. Help would really be appreciated, as I don't know what on earth is going on with this 'truncated http response body'. I tried to read them with wireshark, but it basically gave me the same information. With regards, Ps. I have no clue what the delay between put and delete is, as it's a file of a mere 500 bytes, so it's uploaded in approximately a second. Pps. I copied this question from StackOverflow to this site, as I didn't know the existence of this site and another user suggested that I'd get more answers here, as it's basically a server fault.

    Read the article

  • CPU Lockup when loading folder of bookmarks in Firefox

    - by Gary M. Mugford
    I am running Firefox 3.6 on WinXPSP3 on a duo Core machine with 4G of memory. I am also running Avast! free anti-virus and ZoneAlarm free firewall, both latest versions. Within the last month, my service provider basically forced me to upgrade to a Docsis 3.0 compliant modem (offered me a deal I couldn't turn down). At that point, I also upgraded to FF3.6. Basically, I am not unhappy with many aspects of this switchover, EXCEPT, when I now load a folder of bookmarks (anywhere from 10 to 38) I get nothing like the load times I experienced a couple of months back. It's taking minutes rather than seconds. And the first bookmark in one of the folders, GMail, rarely loads before timing out. I have used the old trick of powering off the cable modem before my day's work. This used to fix 'load-lag' in the old days. I have switched from my ISP's DNS server to Google, OpenDNS and back. And nothing seems to work currently. It's not my DNS cache. That's been flushed and secondary computers also have the same issue when loading folders. I have watched the CPU usage and loading the folder will send VSMon (ZoneAlarm) usage over 40 percent, AVastSvc (Avast!) over 30 and Firefox will then push the needle to 100. There's a brief burst by SVCHost when the others falter in devouring cycles. Then everything subsides to single digits once the last tab is loaded. The only other nominal nastiness is VSMon ALWAYS hitting 50 percent when ANY program starts downloading content from the internet. If I shutdown ZoneAlarm (and VSMon with it), the same slow loading takes place, but this time System is running 50% plus, again driving the usage to 100 per cent. I have my doubts FF3.6 vs FF3.5 is an issue, since the other computers are still running 3.5 and suffer the same issue. Those computers are on, but inactive, most of the time, being backups. Obviously, when the CPU hits 100, I can't do much of anything in FireFox OR in other programs. Video play through WMPC or VLC is extremely choppy, although it doesn't seem to affect the audio. Any ideas what I can try next? Thanks, GM

    Read the article

  • How do I correct a directory incorrectly copied into itself?

    - by Peter Boughton
    Given the following situation... <path>/mydir1/mydir2 ...where mydir2 should have overwritten mydir1, but was instead placed inside, and both directories actually have the same filename. How is that fixed? Attempting to do mv <path>/mydir/mydir/* <path>/mydir/ or mv <path>/mydir <path>/ results in: mv: cannot move `<path>/mydir/mydir` to a subdirectory of itself, `<path>/mydir` This seems stupidly simple, but it's late here and I can't figure it out. There are seventeen such directories to fix (path differs for each, but same mydir name). To confirm, the error message can be caused with this: # cd /path/to/directory # mv mydir/mydir ./ mv: cannot move `mydir/mydir' to a subdirectory of itself, `./mydir' Also tried: # mv mydir/mydir/* mydir/ mv: cannot move `mydir/mydir/otherdir1' to a subdirectory of itself, `mydir/otherdir1' mv: cannot move `mydir/mydir/otherdir2' to a subdirectory of itself, `mydir/otherdir2' and... # mv /path/to/directory/mydir/mydir/otherdir1 /path/to/directory/mydir/ mv: cannot move `/path/to/directory/mydir/mydir/otherdir1' to a subdirectory of itself, `/path/to/directory/mydir/otherdir1' and using a temporary directory: # mv mydir/mydir ./mydir-temp # mv mydir-temp/* mydir/ mv: cannot move `mydir-temp/otherdir1' to a subdirectory of itself, `mydir/otherdir1' mv: cannot move `mydir-temp/otherdir2' to a subdirectory of itself, `mydir/otherdir2' I found a similar question "How to recursively move all files (including hidden) in a subfolder into a parent folder in *nix?" which suggested that mv bar/{,.}* . would do this. But this also gives the same errors, as well as confusingly picking up . and .. from somewhere. # cd mydir # mv mydir/{,.}* . mv: cannot move `mydir/otherdir1' to a subdirectory of itself, `./otherdir1' mv: cannot move `mydir/otherdir2' to a subdirectory of itself, `./otherdir2' mv: cannot move `mydir/.' to `./.': Device or resource busy mv: cannot move `mydir/..' to `./..': Device or resource busy mv: overwrite `./.file'? y Another similar question "linux mv command weirdness" suggests that mv doesn't overwrite and a copy is required. # cd mydir # cp -rf ./mydir/* ./ cp: overwrite `./otherdir1/file1'? y cp: overwrite `./otherdir1/file2'? y cp: overwrite `./otherdir1/file3'? This appears to be working... except there's a lot of files (and dirs) - I don't want to confirm every one! Isn't the f there supposed to prevent this? Ok, so cp was aliased to cp -i (which I found out with type cp), and bypassed by using \cp -rf ./mydir/* ./ which seems to have worked. Although I've solved the problem of getting dirs/files from one place to another, I'm still curious as to what's going on with the mv stuff - is this really a deliberate feature as suggested by Warner?

    Read the article

  • How to configure Transparent IP Address Sharing (TAS) on a Mediatrix 4102 with DGW 2.0 firmware?

    - by Pascal Bourque
    I am making the switch to VoIP. I chose voip.ms as my service provider and Mediatrix 4102 as my ATA. One reason why I chose the Mediatrix over other popular consumer ATAs is that it's supposed to be easy to place it in front of the router, so it can give priority to its own upstream traffic over the home network's upstream traffic. This is supposed to work transparently, with the ATA and router sharing the same public IP address (the one obtained from the modem). They call this feaure Transparent IP Address Sharing, or TAS. Their promotional brochure describes it like this: The Mediatrix 4102 also uses its innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow the PC (or router) connected to the second Ethernet port to have the same public IP address, eliminating the need for private IP addresses or address translations. I am interested by this feature because my router, an Apple Time Capsule, doesn't support QoS and cannot give priority to the voice packets if the ATA is behind the router. However, after hours of searching the web, reading the documentation, and good ol' trial and error, I haven't been able to configure the Mediatrix to run in this mode. Then I found a version of the manual that looks like it was for a previous version of the firmware (SIP), where there is an entire section dedicated to configuring TAS (starting at page 209). But my Mediatrix comes with the DGW 2.0 firmware, whose documentation does not mention TAS at all. So I tried to follow the TAS setup instructions from the SIP documentation and apply them to my DGW firmware, using the Variable Mapping Between SIP v5.0 and DGW v2.0 document as a reference, but no success. Some required SIP variables don't have an equivalent in DGW. So it looks like the DGW firmware does not support TAS at all, or if it does they are not doing anything to help us set it up. So right now, the Mediatrix is behind the router and VoIP works perfectly except when my upstream bandwidth is saturated. My questions are: Is downgrading to SIP firmware the only way to have my Mediatrix 4102 run in TAS mode? If not, anybody knows how to setup TAS on the DGW firmware? Is TAS mode the only way to give priority to the voice packets if I want to keep my current router (Apple Time Capsule)? Thanks!

    Read the article

  • networking tunnel adapter connections?

    - by Karthik Balaguru
    I understand that Tunnel Adapter LAN is for encapsulating IPv6 packets with an IPv4 header so that they can be sent across an IPv4 network. Few queries popped up in my mind based on this :- If i do 'ipconfig', Apart from ethernet adapter LAN details, I get a series of statments as below - Tunnel adapter Local Area Connection* 6 Tunnel adapter Local Area Connection* 7 Tunnel adapter Local Area Connection* 12 Tunnel adapter Local Area Connection* 13 Tunnel adapter Local Area Connection* 14 Tunnel adapter Local Area Connection* 15 Tunnel adapter Local Area Connection* 16 Except for the *16, all the other Tunnel Adapter Local Area Connections show Media Disconnected. Why is the numbering for the Tunnel adapter LAN not sequential? It is like 6, 7, 12, 13, 14, 15, 16. A strange numbering scheme! I tried to figure it out by thinking of some arithmetic series. But, it does not seem to fit in. There is a huge gap between 7 and 12. Any ideas? What is the need for so many Tunnel Adapter LAN connections? Can you tell me a scenario that requires all of those ? I did ipconfig /all to get more information. From the listing, I understand that: 16, 15, 14, 12 are Microsoft 6to4 Adapters 13, 6 are isatap Adapters 7 is Teredo Tunneling Pseudo-interface I understand that the above are for automatic tunneling so that the tunnel endpoints are determined automatically by the routing infrastructure. 6to4 is recommended by RFC3056 for automatic tunneling that uses protocol 41 for encapsulation. It is typically used when an end-user wants to connect to the IPv6 Internet using their existing IPv4 connection. Teredo is an automatic tunneling technique that uses UDP encapsulation across multiple NATs. That is, It is to grant IPv6 connectivity to nodes that are located behind IPv6-unaware NAT devices ISATAP treats the IPv4 network as a virtual IPv6 local link, with mappings from each IPv4 address to a link-local IPv6 address. That is to transmit IPv6 packets between dual-stack nodes on top of an IPv4 network. That is, to put in simple words, ISATAP is an intra-site mechanism, while the 6to4 and Teredo are for inter-site tunnelling mechanisms. It seems that Teredo should alone enabled by default in Vista, But my system does not show it to be enabled by default. Interestingly, it shows a 6to4 tunnel adapter (Tunnel adapter LAN connection 16) to be enabled by default? Any specific reasons for it? If i do ipconfig /all, why is only one Teredo present while four 6to4 are present ? I searched the internet for answers to the above queries, but I am unable to find clear answers.

    Read the article

  • USB mouse connecting and disconnecting randomly

    - by Kalec
    I've bought an acer aspire 5742G about 2 months ago or so and it's been running great, but sometimes I used to hear the windows error beep but I had no idea what was causing it since the "bug" was automatically fixed so fast I couldn't even see an error message (also it kinda always happened when I was busy also, either in a game or while doing my homework). Later on my mouse would simply not work for 3-5 seconds then work again, I thought nothing of it at the time. I also had a problem where it only worked in one usb and one only. To move it I had to remove the battery, unplug the laptop and hold the power button for 2 minutes to reset the bios settings. Since today though it went nuts. Sometimes it disconnects / reconnects 12 times in 10 seconds and windows just keeps beeping till I unplug it, then it runs smooth for 5-6 minutes then it goes nuts again. Other times it seems like it skips (disconnects for a fraction of a second) other times just for 2-3 seconds. But this is incredibly frustrating. Sometimes the power just goes down (the laser turns off) and well that at least I would understand but this is a rare occurrence. Now I know the usb ports work since I have a lot of other devices connected and I tried the mouse on a room m8's laptop so the mouse also works. My only conclusion is that it's an operating system / settings bug and / or problem (I have tried the mouse in all ports by the way). All drivers and bios are up to date (maybe except mouse but I can't seem to update that and the mouse has no name, just a serial number which helps with nothing. Still it worked till today and nothing should have changed any way). I have made sure windows can't shut it down to save power (in device management). Also I tried to delete the drivers and re-install them, rebooting and the power button trick but nothing. Most I have done is get rid of the 12 disconnects / reconnects every 10 seconds :) but that's all :( I would buy a new one but I'm afraid it might do the same thing. ****EDIT****** Tried the mouse again at a friend but now it didn't even install it's software nor did the update work. Think I'll just buy a new one but I'd still like a suggestion at least so I'll leave this open #### EDIT 2 Now it works again, I can't explain this. Still thinking of getting a new one though

    Read the article

  • CPU overheating after cleaning it

    - by Roberts
    I wanted to clean my computer CPU heatsink and fan itself, because the temperature is not what I wanted. About (50C ~ 70C). I have Intel Core 2 Duo E4300 @1.8 GHz (LGA775). The heatsink wasn't so scary filled with dust but I wanted to clean it anyway. I didn't know how to get heatsink with fan from the socket. So after 25 minutes I've figured it out. But I didn't know how to get it back on so I spent a lot time getting out the motherboard from the case. The fan and heatsink... The case and all components are clear of dust. (I'm tired now). Then I put all back just the way it was, well did few things on cable management. But the problem was that I didn't know how to connect front audio connectors. I had Windows XP hibernated. So I started the PC and everything was normal, except CMOS memory was clear. I configured the BIOS just the way it was and while I was doing that I saw about 58C CPU temperature and fan at 1789 RPM. Restarted the computer with new settings applied. But Windows halted with Blue Screen (I forgot what error it was but something with KERNEL). Restarted the PC and deleted hibernation session and everything was back normal. But couldn't record any sound from front panel microphone. The problem was that I messed ground wire with mic. Again after fixing it I turned computer on. No problems. The fan currently is noisy and temperature was 78C. The temperature before was 55C - 60C at idle. Now it's about 60C. If I do something then temperature raises to 79C. While speaking in skype the temperature was 82C. Could this problem occur because of the thermal grease (it's old and never replaced)? Edit The problem wasn't in thermal paste (because I didn't touch it). The problem was that I installed heatsink wrong. Now instead of regular 60C CPU temperature the CPU is at 48C (cool).

    Read the article

  • Why is my new Phenom II 965 BE not significantly faster than my old Athlon 64 X2 4600+?

    - by Software Monkey
    I recently rebuilt my 5 year old computer. I upgraded all core components, in particular from an Athlon 64 X2 4600+ at 2.4 GHz with DDR2 800 to a Phenom II 965 BE (quad core) at 3.6 GHz with DDR3 1333 (actually 1600, but testing consistently detected memory errors at 1600). The motherboard is also much newer and better. The HDD's (x3), DVD writer and card reader are the same. The BIOS memory config is auto-everything except the base timing which I overrode to 1T instead of 2T. The BIOS CPU multiplier is slightly over-clocked to 3.6 GHz from the stock 3.4 GHz. I noticed compiling Java is slower than I expected. As it happens I have some (single-threaded) Java pattern-matching code which is CPU and memory bound and for which I have performance numbers recorded on a number of hardware platforms, including my old system. So I did a test run on the new equipment and was stunned to find that the numbers are only slightly better than my old system, about 25%. The data set it is operating on is a 148,975 character array, which should easily fit in caches, but in any event the new CPU has larger caches all around. The system was, of course, otherwise idle for the test and the test run is a timed 10 seconds to eliminate scheduling anomalies. A long while ago, when I upgraded only memory from DD2 667 to DDR2 800 there was no change in performance of this test, which subjectively supports that the test cycle does not need to (significantly) access main memory, but yes it is creating and garbage collecting a large number of objects in the process of this test (low millions of matches are found for the pattern set). I am about 99.999% certain the code hasn't changed since I last ran it on 2009-03-17 - but I can't easily retest the old hardware, because it is currently in pieces on my work-bench waiting to be built into a new computer for my kids. Note that Windows (XP) reports a CPU speed of 795 MHz unless I have some thing running. With stuff running it seems to jump all over the place each time I use ALT-Pause to display the system properties, everywhere from 795 MHz to 3.4 Ghz. So why might my shiny new hardware under-performing so badly? EDIT: The old memory was Mushkin DDR2 800 with timings set for auto which should have been 5-5-5-12. The new memory is Corsair DDR3 1600, running at 1333 with timings also auto which are 9-9-9-21. In both cases they are a paired set of dual channel DIMMs. I was waiting to ensure my system was stable before tweaking with memory timings.

    Read the article

  • Exchange 2010 forwarded emails by external servers being blocked

    - by MadBoy
    Our users were getting spam messages from their own accounts (same domain/login for example [email protected] to [email protected]). This is preety standard trick and I decided to block it so that anonymous users can't send emails as @company.com. This brought some problems on us like our printers not being able to send emails etc but I solved it with secondary smtp receiver on different port with ip restrictions. However it seems to affect forwarding by some e-mail servers as well: Hi. This is the qmail-send program at home.pl. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. : 89.14.1.26 failed after I sent the message. Remote host said: 550 5.7.1 Client does not have permissions to send as this sender --- Below this line is a copy of the message. Return-Path: Return-Path: Received: from mail.company.com [89.14.1.26] (HELO mail.company.com) by company.ho.pl [79.93.31.43] with SMTP (IdeaSmtpServer v0.70) id 488fcb01c2f069d9; Tue, 3 Jan 2012 09:46:55 +0100 Received: from EXCHANGE1.COMPANY ([fe80::d425:135f:b655:1223]) by EXCHANGE2.COMPANY ([fe80::193f:51ac:9316:cb27%14]) with mapi id 14.01.0355.002; Tue, 3 Jan 2012 09:46:55 +0100 From: =?iso-8859-2?Q?MadBoy?= So basically server forwards it without affecting email address it was send with and our servers treat it like spam. I used this command to block things: Get-ReceiveConnector "DEFAULT Exchange2" | Get-ADPermission -user "NT AUTHORITY\Anonymous Logon" | where {$_.ExtendedRights -like "ms-exch-smtp-accept-authoritative-domain-sender"} | Remove-ADPermission Is there anyway I can keep on receiveing things like forwards but be able to block things (except some dedicated antispam solution - this will be added later). Also how do I "reassing" back the permissions that was removed? EDIT to clarify: I have a domain domain.com configured as Authorative. Couple of our users are on project for differentcompany.com which is not on our servers or anywhere close. Now when they send an email from their accounts lets say [email protected] to [email protected] that special alias is configured so that any email it receives it forwards to multiple people including a group alias at our domain [email protected] and that group alias puts the email in users mailboxes. After the email is forwarded by [email protected] and it reaches our server it is denied because the forwarding done by the "external" server doesn't affect user information so for the server it seems like the [email protected] was actually sender and it treats it as spam and denies it. The server at differentcompany.com just adds itself to the header that it passed thru it and doesn't modify sender at anyway (seems like this is how forwarding works). Although I could probably allow this particular server as allowed to relay but this would seem to affect more servers/users as anyone can setup forwarding on their email back to our domain...

    Read the article

  • Problems when trying to connect to a router wirelessly

    - by Ruud Lenders
    The situation - At my girlfriend's parents' place there are six Windows 7 devices that are wired or wireless connected to a router: 3 dekstops and 3 laptops. There are also several smartphones using the router. The router is secured with WPA2 (AES). The problem - We never had any problems with the router for over a year. But recently - about 3 weeks ago - my girlfriend's laptop (HP) and my laptop (ASUS) started to develop problems while trying to connect to the router. The router has stopped showing up from the network list. Sometimes it comes back and shows up, but then it keeps saying something along the lines of "Could not connect", and not long after that it dissapears again. The range of the router is not the problem here, because we experience the same when we sit next to the router. Sometimes, if we are lucky, and waited a long time (10-15 minutes) without using the laptop for anything, the laptop will eventually succesful connect to the router. The attempts - Of course, the Window 7 troubleshooter. We tried troubleshooting the connection problems and the wireless network adapter, but no luck. We also reset the router enough times to know that's not helping either. Here's the full list of things we tried, but did not help: Running the Windows 7 troubleshooter Resetting the router (more than once) Setting the router settings to factory defaults Disconnecting all other devices except one laptop Applying a system restore Trying static/dynamic IP/DNS - Dynamic is better, right? Enabling/disabling IPv6 - Should I keep IPv6 disabled? Running the command: netsh wlan stop hostednetwork Running the command: netsh wlan set hostednetwork mode=disallow Updating/reïnstalling wireless adapter drivers The tests - To help finding the core of the problem, we tested the following: Plugging an ethernet cable in the router and in our laptops - worked fine Connecting someone else's laptop to the router (wireless) - worked fine Connecting our laptops to someone else's router - worked fine The router - This information might be relevant: Router model: Sitecom 300N Wireless Router Router hardware: version 01 The DCHP Server's IPs range from 192.168.0.100 to 192.168.0.200. Router settings: Wireless channel: 12 Channel bandwidth: 20/40 MHz Extension channel: 8 Preamble type: Long 802.11g protection: Disabled UPnP: Enabled The laptops - If you are wondering about our laptops: My laptop model: ASUS Pro64JQ Girlfriend's laptop: HP Pavillion G6 OS: Both Windows 7 Professional x64 - with Service Pack 1 My wireless adapter: Atheros AR9285 AdHoc 11n: Enabled The question - Does anyone have experienced the same problems as I do? Or does someone know how to solve this? Are there more tricks I can try, or settings I should change? Note - Our laptops are not slow or old. My laptop is 1.5 years old, and the other laptop is just 5 months old. I know how to keep laptops clean and I'm pretty sure both laptops are not bloated with useless software.

    Read the article

  • How to configure Transparent IP Address Sharing (TAS) on a Mediatrix 4102 with DGW 2.0 firmware?

    - by Pascal Bourque
    I am making the switch to VoIP. I chose voip.ms as my service provider and Mediatrix 4102 as my ATA. One reason why I chose the Mediatrix over other popular consumer ATAs is that it's supposed to be easy to place it in front of the router, so it can give priority to its own upstream traffic over the home network's upstream traffic. This is supposed to work transparently, with the ATA and router sharing the same public IP address (the one obtained from the modem). They call this feaure Transparent IP Address Sharing, or TAS. Their promotional brochure describes it like this: The Mediatrix 4102 also uses its innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow the PC (or router) connected to the second Ethernet port to have the same public IP address, eliminating the need for private IP addresses or address translations. I am interested by this feature because my router, an Apple Time Capsule, doesn't support QoS and cannot give priority to the voice packets if the ATA is behind the router. However, after hours of searching the web, reading the documentation, and good ol' trial and error, I haven't been able to configure the Mediatrix to run in this mode. Then I found a version of the manual that looks like it was for a previous version of the firmware (SIP), where there is an entire section dedicated to configuring TAS (starting at page 209). But my Mediatrix comes with the DGW 2.0 firmware, whose documentation does not mention TAS at all. So I tried to follow the TAS setup instructions from the SIP documentation and apply them to my DGW firmware, using the Variable Mapping Between SIP v5.0 and DGW v2.0 document as a reference, but no success. Some required SIP variables don't have an equivalent in DGW. So it looks like the DGW firmware does not support TAS at all, or if it does they are not doing anything to help us set it up. So right now, the Mediatrix is behind the router and VoIP works perfectly except when my upstream bandwidth is saturated. My questions are: Is downgrading to SIP firmware the only way to have my Mediatrix 4102 run in TAS mode? If not, anybody knows how to setup TAS on the DGW firmware? Is TAS mode the only way to give priority to the voice packets if I want to keep my current router (Apple Time Capsule)? Thanks!

    Read the article

  • Secure openVPN using IPTABLES

    - by bob franklin smith harriet
    Hey, I setup an openVPN server and it works ok. The next step is to secure it, I opted to use IPTABLES to only allow certain connections through but so far it is not working. I want to enable access to the network behind my openVPN server, and allow other services (web access), when iptables is disabaled or set to allow all this works fine, when using my following rules it does not. also note, I already configured openVPN itself to do what i want and it works fine, its only failing when iptables is started. Any help to tell me why this isnt working will appreciated here. These are the lines that I added in accordance with openVPN's recommendations, unfortunately testing these commands shows that they are requiered, they seem incredibly insecure though, any way to get around using them? # Allow TUN interface connections to OpenVPN server -A INPUT -i tun+ -j ACCEPT #allow TUN interface connections to be forwarded through other interfaces -A FORWARD -i tun+ -j ACCEPT # Allow TAP interface connections to OpenVPN server -A INPUT -i tap+ -j ACCEPT # Allow TAP interface connections to be forwarded through other interfaces -A FORWARD -i tap+ -j ACCEPT These are the new chains and commands i added to restrict access as much as possible unfortunately with these enabled, all that happens is the openVPN connection establishes fine, and then there is no access to the rest of the network behind the openVPN server note I am configuring the main iptables file and I am paranoid so all ports and ip addresses are altered, and -N etc appears before this so ignore that they dont appear. and i added some explanations of what i 'intended' these rules to do, so you dont waste time figuring out where i went wrong : 4 #accepts the vpn over port 1192 -A INPUT -p udp -m udp --dport 1192 -j ACCEPT -A INPUT -j INPUT-FIREWALL -A OUTPUT -j ACCEPT #packets that are to be forwarded from 10.10.1.0 network (all open vpn clients) to the internal network (192.168.5.0) jump to [sic]foward-firewall chain -A FORWARD -s 10.10.1.0/24 -d 192.168.5.0/24 -j FOWARD-FIREWALL #same as above, except for a different internal network -A FORWARD -s 10.10.1.0/24 -d 10.100.5.0/24 -j FOWARD-FIREWALL # reject any not from either of those two ranges -A FORWARD -j REJECT -A INPUT-FIREWALL -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT-FIREWALL -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT-FIREWALL -j REJECT -A FOWARD-FIREWALL -m state --state RELATED,ESTABLISHED -j ACCEPT #80 443 and 53 are accepted -A FOWARD-FIREWALL -m tcp -p tcp --dport 80 -j ACCEPT -A FOWARD-FIREWALL -m tcp -p tcp --dport 443 -j ACCEPT #192.168.5.150 = openVPN sever -A FOWARD-FIREWALL -m tcp -p tcp -d 192.168.5.150 --dport 53 -j ACCEPT -A FOWARD-FIREWALL -m udp -p udp -d 192.168.5.150 --dport 53 -j ACCEPT -A FOWARD-FIREWALL -j REJECT COMMIT now I wait :D

    Read the article

  • Ubuntu: Multiple NICs, one used only for Wake-On-LAN

    - by jcwx86
    This is similar to some other questions, but I have a specific need which is not covered in the other questions. I have an Ubuntu server (11.10) with two NICs. One is built into the motherboard and the other is a PCI express card. I want to have my server connected to the internet via my NAT router and also have it able to wake from suspend using a Magic Packet (henceforth referred to as Wake-On-LAN, WOL). I can't do this with just one of the NICs because each has an issue - the built-in NIC will crash the system if it is placed under heavy load (typically downloading data), whilst the PCI express NIC will crash the system if it is used for WOL. I have spent some time investigating these individual problems, to no avail. My plan is thus: use the built-in NIC solely for WOL, and use the PCI express card for all other network communication except WOL. Since I send the WOL Magic Packet to a specific MAC address, there is no danger of hitting the wrong NIC, but there is a danger of using the built-in NIC for general network access, overloading it and crashing the system. Both NICs are wired to the same LAN with address space 192.168.0.0/24. The built-in ethernet card is set to have interface name eth1 and the PCI express card is eth0 in Ubuntu's udev persistent rules (so they stay the same upon reboot). I have been trying to set this up with the /etc/network/interfaces file. Here is where I am currently: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 auto eth1 iface eth1 inet static address 192.168.0.254 netmask 255.255.255.0 I think by not specifying a gateway for eth1, I prevent it being used for outgoing requests. I don't mind if it can be reached on 192.168.0.254 on the LAN, i.e. via SSH -- it's IP is irrelevant to WOL, which is based on MAC addresses -- I just don't want it to be used to access internet resources. My kernel routing table (from route -n) is Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 My question is this: Is this sufficient for what I want to achieve? My research has thrown up the idea of using static routing to specify that eth1 should only be used for WOL on the local network, but I'm not sure this is necessary. I have been monitoring the activity of the interfaces using iptraf and it seems like eth0 takes the vast majority of the packets, though I am not sure that this will be consistent based on my configuration. Given that if I mess up the configuration, my system will likely crash, it is important to me to have this set up correctly!

    Read the article

  • Could I centralize batch files more efficiently?

    - by PeanutsMonkey
    I am new to the world of batch scripting so please forgive what may appear as basic questions. I am learning as I get assigned different jobs and I am a huge proponent of automation where possible. I have several batch files that perform several tasks. Each of these files had their paths hard-coded e.g. c:\temp. d:\data, etc in the batch file. Initially I moved these to a text file I could call from a batch file e.g. for /f "tokens=1,2 delims==" %%R in (config.txt) do ( if %%R==bdata set bdata=%%S if %%R==cdata set cdata=%%S ) The config.txt file contains these values bdata=c:\temp cdata=d:\data I realized that each time I would need to create a new variable, I would need to update the config.txt file as well the config.bat files. I decided I would move all the values to just the config.bat file as follows set bdata=c:\temp set cdata=d:\data I then updated each of the existing batch files to call the variables rather than the hard-coded paths. I also added the following lines of code to each batch file except config.bat. The only additional line added to the config.bat file is @echo off. @echo off setlocal enableextensions enabledelayedexpansion call config.bat I then have another batch file that centralizes calling all the batch files in sequence. The name of this batch file is start.bat. The reason I am using start /wait is because there have been instances of where the delete.bat runs before compress.bat has had an opportunity to finish. start /wait compress.bat start /wait validate.bat start /wait delete.bat Questions Is this the best way to centralize values and if not, what is a better way? Do I need to specify setlocal enableextensions enabledelayedexpansion in all the existing batch files? Do all the batch files have to have @echo off or is it sufficient for just the config.bat file? Is start /wait the best way to call multiple files? Can I pass values from one batch file to another using the said command? All the batch files have different functions e.g. move, delete, etc however use %%a or %%b. Is this okay? For example The validate.bat file has the code for %%a in (%bdata%\*.*) do if "%%~xa" == "" move /Y "%bdata%\%%~xa" "%bdata%\%done%" and the delete.bat file has the code for %%a in (%bdata%\*.*) do if "%%~xa" == ".txt" del "%%a"

    Read the article

  • Sent items listed by sender's name (my name!) not recipient in Outlook for Mac 2011

    - by user568458
    Outlook 2011 on a Mac (OSX7 Lion), on a (mostly PC) office network using Microsoft Exchange server. In Outlook 2011, in the network "Sent Items" folder, all emails are listed showing the sender's name (my name), not the recipients' names. That means every single email is headed with my own name, like this: My Name 08/09/2012 Some subject line [flag] My Name 08/09/2012 Re: Another subject line [flag] My Name 07/09/2012 Re: different subject line [flag] My Name 07/09/2012 different subject line [flag] ...and so on. There's no clue at all as to who these emails were to, until I open each and every one. I guess it's reassuring to be told that every email that I sent was sent by me... and if I was ever to forget my own name while browsing my sent emails folder, it'd be super useful... But it's not very helpful for navigating sent emails. Is this normal for Office for Mac 2011? How can I fix this, so that the list shows the recipients' names instead of endlessly reminding me of my own name? Things I've found while researching this: This can also happen in Outlook for Windows. On Windows, it's easily fixed by resetting the field. That method doesn't work on Mac because the fields can't be selected separately. It seems this can also happen in Apple Mail too, and a lot of people seem stumped by this. I can't find anything on this specific to Outlook 2011 or Outlook for Mac in general. A simple guide on how to fix this would be the best answer, but I'd also welcome any knowledgable thoughts from Microsoft Exchange Server people on whether this sounds like an Outlook settings issue which I can fix on my machine, or some issue relating to how the Mac gets data from the server and network. The fact that Apple Mail users have encountered the same issue with no apparent fix makes me think the problem might be in the network rather than the mail client - but that's way beyond my limited knowledge of these things. I don't know whether the local ("On my computer") Sent Items folder has the same problem, as it's configured so that no emails except drafts are ever stored in these local folders. Drafts saved locally are listed by recipient as expected.

    Read the article

  • When running a shell script, how can you protect it from overwriting or truncating files?

    - by Joseph Garvin
    If while an application is running one of the shared libraries it uses is written to or truncated, then the application will crash. Moving the file or removing it wholesale with 'rm' will not cause a crash, because the OS (Solaris in this case but I assume this is true on Linux and other *nix as well) is smart enough to not delete the inode associated with the file while any process has it open. I have a shell script that performs installation of shared libraries. Sometimes, it may be used to reinstall versions of shared libraries that were already installed, without an uninstall first. Because applications may be using the already installed shared libraries, it's important the the script is smart enough to rm the files or move them out of the way (e.g. to a 'deleted' folder that cron could empty at a time when we know no applications will be running) before installing the new ones so that they're not overwritten or truncated. Unfortunately, recently an application crashed just after an install. Coincidence? It's difficult to tell. The real solution here is to switch over to a more robust installation method than an old gigantic shell script, but it'd be nice to have some extra protection until the switch is made. Is there any way to wrap a shell script to protect it from overwriting or truncating files (and ideally failing loudly), but still allowing them to be moved or rm'd? Standard UNIX file permissions won't do the trick because you can't distinguish moving/removing from overwriting/truncating. Aliases could work but I'm not sure what entirety of commands need to be aliased. I imagine something like truss/strace except before each action it checks against a filter whether to actually do it. I don't need a perfect solution that would work even against an intentionally malicious script. Ideas I have so far: Alias cp to GNU cp (not the default since I'm on Solaris) and use the --remove-destination option. Alias install to GNU install and use the --backup option. It might be smart enough to move the existing file to the backup file name rather than making a copy, thus preserving the inode. "set noclobber" in ~/.bashrc so that I/O redirection won't overwrite files

    Read the article

  • SSL certificate for Oracle Application Server 11g

    - by Easter Sunshine
    I was asked to get an SSL certificate for an "Oracle Application Server 11g" which has a soon-to-expire certificate. Brushing aside the fact that 10g seems to be the newest version, I got a certificate from InCommon, as I usually do without problem (except this is the first time I supplied Oracle Application Server 11g as the software type on the CSR form). On the email containing links to download the certificate, it mentioned: Certificate Details: SSL Type : InCommon SSL Server : OTHER I forwarded the email over to the person responsible for installing it and got a reply that the server type must be Oracle Application Server for the certificate to work (the CN is the same as before). They were unable to install this certificate (no details provided to me) and mentioned they had this issue previously with Thawte when they didn't supply Oracle Application Server as the server type. I don't see any significant difference between the currently installed certificate (working) and the new one I just got signed by InCommon (not working). $ openssl x509 -in sso-current.cer -text shows, with irrelevant information ommitted. Data: Version: 3 (0x2) Signature Algorithm: sha1WithRSAEncryption Issuer: C=ZA, ST=Western Cape, L=Cape Town, O=Thawte Consulting cc, OU=Certification Services Division, CN=Thawte Premium Server CA/[email protected] Validity Not Before: Oct 1 00:00:00 2009 GMT Not After : Nov 28 23:59:59 2012 GMT Subject Public Key Info: Public Key Algorithm: rsaEncryption Public-Key: (2048 bit) Modulus: Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Basic Constraints: critical CA:FALSE X509v3 CRL Distribution Points: Full Name: URI:http://crl.thawte.com/ThawteServerPremiumCA.crl X509v3 Extended Key Usage: TLS Web Server Authentication, TLS Web Client Authentication Authority Information Access: OCSP - URI:http://ocsp.thawte.com Signature Algorithm: sha1WithRSAEncryption and $ openssl x509 -in sso-new.cer -text shows Data: Version: 3 (0x2) Signature Algorithm: sha1WithRSAEncryption Issuer: C=US, O=Internet2, OU=InCommon, CN=InCommon Server CA Validity Not Before: Nov 8 00:00:00 2012 GMT Not After : Nov 8 23:59:59 2014 GMT Subject Public Key Info: Public Key Algorithm: rsaEncryption Public-Key: (2048 bit) Modulus: Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Authority Key Identifier: keyid:48:4F:5A:FA:2F:4A:9A:5E:E0:50:F3:6B:7B:55:A5:DE:F5:BE:34:5D X509v3 Subject Key Identifier: 18:8D:F6:F5:87:4D:C4:08:7B:2B:3F:02:A1:C7:AC:6D:A7:90:93:02 X509v3 Key Usage: critical Digital Signature, Key Encipherment X509v3 Basic Constraints: critical CA:FALSE X509v3 Extended Key Usage: TLS Web Server Authentication, TLS Web Client Authentication X509v3 Certificate Policies: Policy: 1.3.6.1.4.1.5923.1.4.3.1.1 CPS: https://www.incommon.org/cert/repository/cps_ssl.pdf X509v3 CRL Distribution Points: Full Name: URI:http://crl.incommon.org/InCommonServerCA.crl Authority Information Access: CA Issuers - URI:http://cert.incommon.org/InCommonServerCA.crt OCSP - URI:http://ocsp.incommon.org Nothing jumps out at me as the reason one would not work so I don't have a specific request for the signer for what to do differently when re-signing.

    Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >