Search Results

Search found 10169 results on 407 pages for 'port'.

Page 269/407 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• Exchange 2003 SMTP SSL and various email clients

  - by FrancisV

  This Exchange 2003 server sits behind a firewall with a virtual SMTP server listening on port 465 and attached an SSL certificate from Comodo to the virtual server. However, when trying to send from Apple Mail.app 4.x and Outlook 2011 for Mac, it never completes the connection (time out). Oddly though, the same setup works with Thunderbird. My question is: Does it matter if the friendly name of the certificate is different from the internal hostname? The machine has 2 hostnames: external and internal. The official SSL is using the external name. When using a self-signed certificate with the same name as the internal, I still can't send from the Mail.app and Exchange clients but I can with Thunderbird.

  Read the article

• Why is the pavucontrol level indicator jumping while nothing plays?

  - by EnterTheLiquidToasterFamily

  The level indicator in the screenshot does jump around even if nothing is playing. The indicator also reasonably represents sound levels when music is playing. I dont have any mediaservers running or noisy browsertabs open. Also no mic connected. When I turn the volume to max in software and on the amp, there is no noise from the speakers at all. Played music is loud and not distorted. Hardware: Realtek ALC889 over optical audio connector to a generic amp. Software: Debian Wheezy with latest backport kernel 3.14 (same thing on wheezy 3.2 stock), wheezy pulseaudio, xfce session, a custom asound.conf that enables pulseaudio to push sound over optical port. /etc/asound.conf pcm.a52 { @args [CARD] @args.CARD { type string } type rate slave { pcm { type a52 bitrate 448 channels 6 card $CARD } rate 48000 #required somehow, otherwise nothing happens in PulseAudio } }

  Read the article

• Does using VLANs in your network infrastructure cause an appreciable decrease in performance?

  - by Peter Grace

  This is something I've never considered before and wanted the opinions of the experts. We use VLANs day in and day out for various network tasks. My modus operandi is that in general, if something supports VLANs, that port is getting trunked because it just makes a ton of sense if there's even the slightest chance you need to do more than one thing on that single link. As I ponder this, though, I'm wondering whether there's a performance penalty involved with this line of thinking? Is the impact negligible?

  Read the article

• Setting up Mac VPN on simple network with separate IPs

  - by Dave

  Hi there, We have a pretty simple network configuration. A typical ASDL line with two extra IP addresses. We have a basic home network router Dlink DIR-655. We have two Mac OS X Snow Leopard Servers that we want to setup VPN on. The problem is that we can't change the ports which VPN works under ie. we can only setup port forwarding for UDP 500,1701,4500 to a single server. I'm wondering how we can cost effectively re-work our network so that we can take advantage of the separate IP addresses and have both VPNs working with the same router. Is that possible with our current hardware setup or do we need something more powerful? We're also toying with Mobile Access and wondering if that might be easier to setup. Expert help is greatly appreciated.

  Read the article

• Linking two networks that have a common device

  - by Serban Razvan

  I recently bought a Samsung Smart TV having in mind to connect it to the Internet. Because my router is very far from it and not wanting to buy an expensive wireless for the TV, I created a homemade solution. I have the laptop (an smartphone and the PC) connected to the router which is connected to the internet. I shared the laptop's wireless connection to the ethernet port which I connected to the TV. So far, the TV is connected to the internet, but is there any way to make him part of the router's network instead of the 2 devices network (the laptop and the TV)?

  Read the article

• How can I make my Ubuntu server accessible to the internet ?

  - by wahid

  Hi, I already installed applications to make my server web server. when I type the DHCP released ip address in the web browser, i can access it but all it says is "it works....etc". I can copy files to /var/www successfuly using WINSCP but yet, i can not see any files when I connect to it using my windows machine in the browser. Secondly , I tried to forward port on my home SMC router, it only accepts local lan ip which my ubuntu server picks up internet ip from router...what should i do ? can you help please ???? Thanks,

  Read the article

• Recommendations: Good Network MFP Printer/Scanner

  - by Joeme

  Hi, We have a small office that is expanding. At the moment we have 1x HP J6424 MFP, shared using it's built in network port. It is now becoming a headache, we have daily problems with people not being able to print or scan, and jobs just sitting in the queue. Or the scanner not being detected. Sometimes people can print but not scan, sometimes scan but not print, sometimes a bit of both. We are also pretty much constantly printing or scanning, or trying to! I would like to get a laser MFP (mono is fine) which works well for scanning a printing over the network with multiple users. Althernativly any recommendations for network scanners (sheet feed and or duplex a bonus). Clients are Windows 7 and Mac. Thanks very much!

  Read the article

• USB Device With Embedded Fileserver

  - by Richard Martinez

  I'm attempting to access logs from a proprietary hardware box with no reasonable hope of modifying the software. There is a process on the device to dump log files to a flash drive on the USB port after entering a code sequence. Currently, analysis of the logs requires the following: Physical presence at the device Manual entry of the code sequence Removal of USB device Insertion of USB device into a normal Linux box I'm hoping there is some sort of device that can act as a USB mass storage device but simultaneously make it's contents available as a network file share (wired preferred). Does such a device currently exist? A combo hardware/software solution would also work.

  Read the article

• Can only connect to IIS site through localhost

  - by Rembrandt Q. Einstein

  I'm building a web service for my company's iPhone application, and everything's been working smoothly by running tests through localhost on the development machine. I'm now in the phase where I need to test connections from other computers within the network, and any connection other than localhost gives me a 404. My internal IP, 127.0.0.1, and computername all get 404 when connecting from any computer, either the one the site's hosted on or any others on the network. Telnet can get through to port 80, and I've temporarily disabled all firewalls on this machine (I do not have control over the external firewall, but I'm only testing connections within the network) Does anyone have a clue why this is happening? I was able to connect to the web service from other computers when hosted on a Mac via Apache, but because I'm now using a SQL Server connection I'm restricted to using IIS for Windows Authentication. Googling only provided answers related to firewalls, and mine is disabled note: I cannot use Anonymous Authentication, but even in testing that it did not affect the issue.

  Read the article

• Are there HP Infinihost III ex drivers for windows available?

  - by Matt

  I picked up some infiniband cards off ebay for development/testing purposes. I was hoping that there would be some drivers available under windows 7, but it doesn't seem to be recognised by the OFED software which would seem to contain windows drivers. They are however immediately picked up by Ubuntu and drivers are loaded. Are these cards supported under windows 7 at all? mstflint under linux reports: Image type: Failsafe FW Version: 4.8.930 I.S. Version: 1 Device ID: 25208 Chip Revision: A0 Description: Node Port1 Port2 Sys image GUIDs: 001a4bffff0c9374 001a4bffff0c9375 001a4bffff0c9376 001a4bffff0c9377 Board ID: (HP_0060000001) VSD: PSID: HP_0060000001 From what I can tell they are the following: HP IB 4X DDR PCI-e DUAL PORT HCA (HP part number 409376-B21)

  Read the article

• Strange behavior of USB HID device

  - by spyder

  I have a device with ARM that work as USB HID. It working well on Windows XP x32 sp 2 and sp 3 (USB 2.0, many PCs), on Windows 7 x32 Ultimate (USB 2.0, Lenovo and HP laptops) but do not work on Windows 7 x64 Home Premium sp1 — plugged and unplugged frequently in USB 2.0 with baloon with "unknown device" in system tray and works not well in USB 3.0 port (MSI all-in-one PC), not all programs can detect it. What can cause this problem? Update. I connected my device via USB hub and everything works fine with it.

  Read the article

• vps running out of memory, 200MB free

  - by demon

  At the beginning of this year I took a VPS for my website because I was running against the resource limits from a shared hosting. Here are the things I know: 2GB memory, with 1GB swap Debian X64 server ED installed Software running on the webserver: mysql apache postfix pop3 imap amavisd clamd cron fail2ban munin-node pure-ftpd spamd nginx Now for the setup: Nginx listens on port 80 and handles the static files, the php side is done by apache2 running mod_php in combi with apc(no var caching!). Iam using a pretty 'busy' drupal and phpbb stack on the server, for drupal iam using boost and authcache to handle of the server load with a pressflow stack. phpbb is just phpbb3 with some mods installed, but has at max 30 users online at a time.. The problem is that its staring to use the swap after a few days after a reboot and thus the site becomes slower. I'v added pictures of monit and munin, so maybe somebody can help me out... Monit: Munin:

  Read the article

• Using a Dell PowerConnect to set up load balancing/redundancy, 1 switch 2 routres 2 private wan link

  - by MarianoC

  Hi, We have different locations connected by two different WAN providers. Each site has a dell powerConnect 6224 and two cisco routers with the WAN connections (we don’t have access to router admin). The 6224 connects to each cisco LAN port and to our LAN backbone. We would like the 6224 provide the ip gateway address and load balance and support redundancy, if one of the routes fail. Is this possible?. We can't find any samples on doing this and we have tried with no success. Any help or link to documentation regarding this, will be greatly appreciated. Thanks, MarianoC

  Read the article

• How do I improve picture quality while streaming live football (soccer) from my Dell D600 to an HDTV?

  - by Bob

  I have fibre broadband with speeds up to 38mbs, my Dell D600 has its max 2gb ram and has an ATI Mobility RADEON 9000 4xAGP 32mb card in it...Its TV support it says is NTSC or PAL in S-video and composite modes with a 7-pin mini-DIN connector (optional S-video to composite video adapter cable) and a vga port which i am using at the moment... The laptop runs Windows XP, an 80g HD with only windows + necessary updates and anti virus software on it..... There is HDMI on the TV, but not the laptop Fairly slow moving and close up pictures arent too bad, but when the movment is fast(a shot on goal) or in the distance, I cant see the ball and the images go out of focus.

  Read the article

• duplicate video stream using a router (?)

  - by Dani

  I have a viedo stream coming from one site, I want to do the following with the minimum delay possible: I want to duplicate the stream (inside the router - preferred) and send it to a few more locations one of them is local network and the rest - on other networks. I want to be able to do it to several streams simultaneously. Is it possible to do this - using network devices only ? What device is capable to do this ? (I can always record the stream and rebroadcast it - but that's a lot of delay, I'm looking for functionality that similar to port duplicating, but on higher layers). Thanks.

  Read the article

• No blocked ports on internal interface of ASA

  - by blsub6

  I have a cisco ASA 5505 with three interfaces: Internal (100), DMZ (50) and External (0). The internal has a IPSEC VPN tunnel to my internal network I couldn't log in to my domain because of all of the port restrictions and such. I tried monitoring the traffic through the interface, seeing what it's blocking and then unblocking those ports but even then it didn't work completely correctly I finally just added a rule to permit any ip traffic from any network to any network on the internal interface and, of course, it worked fine But is that good security practice? Should I be blocking ports on an interface that's internal and over a VPN with the highest security level?

  Read the article

• What are people using as Login scripts in large enterprises

  - by beakersoft

  Hi, We have recently been tasked with looking after the user login side of things in our enterprise (windows clients in active directory). We have a system at the moment that uses a vbscript login/loggof script to call a couple of DLL written in vb 6. The DLL's actions are controled by some config files based on users/groups witch is administrated from a central app. This is quite a good system, but kind of want to come away from vb6 for the dll's (maybe port them to c++ but them you have to make them com+ to call them from vbscripts etc) and possibly away from vbscript for the actual login scripts themselves. Just wondered what other people are using, what people can suggest etc Thanks Luke

  Read the article

• Need advice on how to set up live video streaming to web/mobile devices

  - by jasondewitt

  I have a bunch of live udp video streams that currently are viewed by set top boxes in my network. I would like to pick this video up (I can do this with vlc now) and stream it out to other non-STB endpoints (webpage or a phone/tablet of some sort). Right now I am able to pick up the udp stream with vlc and convert it to an http stream on port 8080 of my vlc box. Then I can use the vlc client to pick up and watch that video stream. This is where I'm not sure where to go with it. I really doubt I would want everyone who is watching the video to make a connection back to my vlc server that is doing the encoding, so how do I distribute this live video to the people who want to see it?

  Read the article

• Cloud services can't be reached from complex customer infrastructure

  - by Nock

  We have several services running on a cloud, they all are hosted on Windows Server 2012 R2, have public IP address and specific port. Some of our customers can't reach them because for "some reason" the ports are cut between a firewall between them and us. (some customers are using a shared internet connection in a multi tenant office and they can't change firewall communication) Well, you get it, we don't have the possibility to make all the firewall "allowing" the communication. My customers all runs Windows 7 at least. What is the best counter solution in such case, using Microsoft (Windows Server) technologies? The best would be some kind of tunneling communication or VPN, but the customer should also be able to access his/her enterprise resources. Bby the way, today we using IPSec using Windows Firewall to secure the communication, is IPSec tunneling a solution for us? Otherwise, is there a service in Windows to enable some kind of VPN between a client and a server but only for a given set of servers?

  Read the article

• Running a VM off of an external HD via USB

  - by Nelson LaQuet

  Is it viable to run (i.e. reference the vmx/vhd directly from the mounted drive) a VM (vmware running Windows Seven) off of an external HD via USB? I mean, I know it's possible, but I guess I'm asking if USB provides enough bandwidth for normal usage... If so, are there any particular brands that may be better or worse? I know that ESATA would be a more viable setup, but my laptop doesn't have an ESATA port. Currently I use the VM to segregate all of my work development servers and software from my main machine; so I will be running all development servers and tools on the VM directly.

  Read the article

• ssh freezes when trying to connect to some hosts

  - by NS Gopikrishnan

  When I try to ssh to particular machine/s in a list, The SSH command happens to be freezing. I tried out setting ssh timeout. But then also it's freezes even after the timeout. In verbose mode : OpenSSH_3.9p1, OpenSSL 0.9.7a Feb 19 2003 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to x358.x.server.com [10.x.x.x] port 22. debug1: fd 3 clearing O_NONBLOCK debug1: Connection established. debug1: identity file /export/home/sqlrpt/.ssh/identity type -1 debug1: identity file /export/home/sqlrpt/.ssh/id_rsa type -1 debug1: identity file /export/home/sqlrpt/.ssh/id_dsa type 2 At this point it freezes. A work around I thought was to create a child process for each ssh calls and if the process doesn't respond after a timeout - Kill it. But are there any less complex ways, so that I can accommodate it in a shell script itself rather than going for a C/C++ program ?

  Read the article

• How can write a mod_rewrite rule to determine if the domain is not the main domain then change https:// to http://

  - by Oudin

  I've set up a WordPress multi-site with a wildcard ssl for example.com to access the admin area securely. However I'm also using domain mapping to map other domains to other sites e.g. alldogs.com to alldogs.example.com. The problem is when I'm trying to access the front end of a site from and admin for a mapped domain e.g. alldogs.com by clicking "Visit Site" the Link goes to https://alldogs.com because of the forced ssl applied to the admin area. Which produces a certificate warning since the certificate is for example.com and not alldogs.com. How can write a mod_rewrite rule to determine if the url/link clicked on is not the main domain e.g. example.com then change the https:// to http:// so the site can be accessed via port 80 and not generate a certificate warning for that mapped domains

  Read the article

• Protecting a SVN server

  - by user35072

  For various reasons we are finding it increasingly difficult to work with remote workers. We are a very small developer shop and it's becoming impractical to do manual merges on a daily basis. So we're left with little choice (?) but to consider opening up our SVN servers. I'm looking into the following: Full HTTPS session Running non-80 port Strong password policy Is this enough to prevent someone hacking and stealing data? I will also look into VPN but first would like to understand any alternative solutions.

  Read the article

• L2TP Site to Site VPN issues

  - by Chris Lively

  I have a windows 2008 r2 server that needs to establish a VPN connection to a remote VPN server. We're using the L2TP protocol with a pre-shared key. I initially used the New Demand Dial interface wizard. Then I went into properties on the interface and set the type of VPn to L2TP/IPSec and put the key under the advanced settings. The error I received when attempting to connect is: An error occured during connection of the interface. A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.

  Read the article

• localhost works 127.0.0.1 does not IIS

  - by NickatUship

  Very weird problem on IIS. Never had it before: localhost works, but 127.0.0.1 does not. localhost pings to 127.0.0.1. www.mydomain.com also pings to that IP, which is set up in the hosts file, but that also doesnt work locally. I've ipconfig /flushdns 'd without success. Ive even restarted the server. Another server set up the exact same way works fine. Any ideas? To be clear, im accessing the URLs in IE like this: http://localhost http://127.0.0.1 http://www.mydomain.com I can telnet to port 80 without a problem for all 3

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >