Search Results

Search found 10215 results on 409 pages for 'ram usage'.

Page 269/409 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• ubuntu 12.04 LTS hangs on boot when external monitor is connected

  - by vladeta

  I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

  Read the article

• Ubuntu 12.04 still slow at mounting internal filesystem

  - by Matthew Goson

  I'm using Toshiba laptop with this configuration: - CPU: Core i5, 2.4GHz - RAM: 4GB - Graphics card: Intel - Hard disk: 500GB SATA I installed Ubuntu 12.04 64bit and got the same issue with this guy Very slow boot due to mounting filesytem, I tried all suggestions there but the slow boot issue still here. Here's a part of my dmesg: [ 2.041015] usbhid: USB HID core driver [ 2.101378] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd [ 2.137980] atl1c 0000:04:00.0: version 1.0.1.0-NAPI [ 2.779080] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 22.822597] udevd[381]: starting version 175 [ 22.837954] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.850837] lp: driver loaded but no devices found [ 23.003822] Adding 7079096k swap on /dev/sda7. Priority:-1 extents:1 across:7079096k [ 23.407915] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 23.408153] mei 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 23.408160] mei 0000:00:16.0: setting latency timer to 64 [ 23.408211] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 23.433196] [drm] Initialized drm 1.1.0 20060810 Additional information: my sda1 is a primary NTFS partition, sda2 is a primary ext4 partition which I installed Ubuntu onto. Other partitions are inside an extended partition.

  Read the article

• Welcome!

  - by mannamal

  Welcome to the Oracle Big Data Connectors blog, which will focus on posts related to integrating data on a Hadoop cluster with Oracle Database. In particular the blog will focus on best practices, usage notes, and performance tips for using Oracle Loader for Hadoop and Oracle Direct Connector for HDFS, which are part of Oracle Big Data Connectors. Oracle Big Data Connectors 1.0 also includes Oracle R Connector for Hadoop and Oracle Data Integrator Application Adapters for Hadoop. Oracle Loader for Hadoop: Oracle Loader for Hadoop loads data from Hadoop to Oracle Database. It runs as a MapReduce job on Hadoop to partition, sort, and convert the data into an Oracle-ready format, offloading to Hadoop the processing that is typically done using database CPUs. The data is thenloaded to the database by the Oracle Loader for Hadoop job (online load) or written out as Oracle Data Pump files for load and access later (offline load) with Oracle Direct Connector for HDFS. Oracle Direct Connector for HDFS: Oracle Direct Connector for HDFS is a connector for high speed access of data on HDFS from Oracle Database. With this connector Oracle SQL can be used to directly query data on HDFS. The data can be Oracle Data Pump files generated by Oracle Loader for Hadoop or delimited text files. The connector can also be used to load data into the database using SQL.

  Read the article

• Recommended formats to store bitmaps in memory?

  - by Geotarget

  I'm working with general purpose image rendering, and high-performance image processing, and so I need to know how to store bitmaps in-memory. (24bpp/32bpp, compressed/raw, etc) I'm not working with 3D graphics or DirectX / OpenGL rendering and so I don't need to use graphics card compatible bitmap formats. My questions: What is the "usual" or "normal" way to store bitmaps in memory? (in C++ engines/projects?) How to store bitmaps for high-performance algorithms, such that read/write times are the fastest? (fixed array? with/without padding? 24-bpp or 32-bpp?) How to store bitmaps for applications handling a lot of bitmap data, to minimize memory usage? (JPEG? or a faster [de]compression algorithm?) Some possible methods: Use a fixed packed 24-bpp or 32-bpp int[] array and simply access pixels using pointer access, all pixels are allocated in one continuous memory chunk (could be 1-10 MB) Use a form of "sparse" data storage so each line of the bitmap is allocated separately, reusing more memory and requiring smaller contiguous memory segments Store bitmaps in its compressed form (PNG, JPG, GIF, etc) and unpack only when its needed, reducing the amount of memory used. Delete the unpacked data if its not used for 10 secs.

  Read the article

• How can I redirect all files in a directory that doesn't conform to a certain filename structure?

  - by user18842

  I have a website where a previous developer had updated several webpages. The issue is that the developer had made each new webpage with new filenames, and deleted the old filenames. I've worked with .htaccess redirects for a few months now, and have some understanding of the usage, however, I am stumped with this task. The old pages were named like so: www.domain.tld/subdir/file.html The new pages are named: www.domain.tld/subdir/file-new-name.html The first word of all new files is the exact name of the old file, and all new files have the same last 2 words. www.domain.tld/subdir/file1-new-name.html www.domain.tld/subdir/file2-new-name.html www.domain.tld/subdir/file3-new-name.html ect. We also need to be able to access the url: www.domain.tld/subdir/ The new files have been indexed by google (the old urls cause 404s, and need redirected to the new so that google will be friendly), and the client wants to keep the new filenames as they are more descriptive. I've attempted to redirect it in many different ways without success, but I'll show the one that stumps me the most RewriteBase / RewriteCond %{THE_REQUEST} !^subdir/.*\-new\-name\.html RewriteCond %{THE_REQUEST} !^subdir/$ RewriteRule ^subdir/(.*)\.html$ http://www.domain.tld/subdir/$1\-new\-name\.html [R=301,NC] When visiting www.domain.tld/subdir/file1.html in the browser, this causes a 403 Forbidden error with a url like so: www.domain.tld/subdir/file1-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name.html I'm certain it's probably something simple that I'm overlooking, can someone please help me get a proper redirect? Thanks so much in advance! EDIT I've also got all the old filenames saved on a separate document in case I need them set up like the following example: (file(1|2|3|4|5)|page(1|2|3|4|5)|a(l(l|lowed|ter)|ccept)

  Read the article

• Photos being copied all over the place

  - by plua

  We have a rather popular website with plenty of photos. Our whole business depends on our content - and the photos are important in this. We invest a lot of time, effort, and money into taking these pictures. On our website we have clear copyright notices, we have the website name and logo in the photos, and we have a Photo Licensing page which states the prices of licensing our photos. Despite all this, our photos are copied by personal and commercial websites alike. We really want to do something about this. We do not want them to take out the photos and leave it at that. We want them to pay for the usage, as we clearly state on our website. Now a few questions come to mind: Can we legally force them to pay right away? Or are we obligated to first write a "Cease and Desist" letter? Photos are used on websites throughout the world. Are there any worldwide rules for this? Has anybody experience with doing these things outside of their home country? Should we hire a lawyer in any country? Or could a local lawyer contact oversees companies directly?

  Read the article

• Random touchpad and keyboard freezes on new 10.10 installation

  - by ancaleth

  My touchpad and keyboard freeze up on my newly installed Ubuntu 10.10. I was using Ubuntu 10.4 via wubi before on this Laptop where this problem never occurred. (I did not migrate wubi or upgrade to 10.10, it's a fresh start. 64-bit on Dell Studio, plenty of RAM, plenty of free space on partition etc.) I can't say there is a pattern yet, once it happened during the download of packages with the Update Manager, once it was just using Firefox, no other program running. I was forced to shut down manually. In between these crashes the laptop was booted once, updates were installed etc., firefox was used and there weren't any problems. Both crashes should be in the attached kern.log and I noticed there were some error problems before the last crash (at the end, obviously). It seems the wireless was experiencing problems. This wasn't noticed on the user end, since the touchpad + keyboard were already frozen. kern.log: http://paste.ubuntu.com/552617/ How can the freezes be fixed?

  Read the article

• Ubuntu 3D does not work on Dell system with a AMD Radeon HD 6470M

  - by VeeKay

  I am running 64 bit Ubuntu on Dell with 1GB graphic card. I login with "Ubuntu" hoping to see Unity 3d but it doesn't. Unity 2D runs instead. when I type in echo "$DESKTOP_SESSION" it confirms the Unity-2D. I've checked the System info that shows like : The graphics row shows itself as empty. SO I've presumed that the graphic drivers aren't detected and hence I went to Unity- Additional Drivers and installed the fglrx driver that the UI has suggested. Even after installing so, the graphics part in System info details shows nothing and still Unity 2D runs in spite of all the effort. Please help! How can I get my Unity 3D back? Hardware Info Video Card : AMD Radeon™ HD 6470M - 1GB (For ICC) RAM : 6GB (1 X 2GB + 1 X 4GB) 2 DIMM DDR3 1333Mhz OS : 64 bit Ubuntu 11.10 Edit : Output for /usr/lib/nux/unity_support_test -p X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 155 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 21 Current serial number in output stream: 21

  Read the article

• is wisdom of what happens 'behind scenes' (in compiler, external DLLs etc.) important?

  - by I_Question_Things_Deeply

  I have been a computer-fanatic for almost a decade now. I've always loved and wondered how computers work, even from the purest, lowest hardware level to the very smallest pixel on the screen, and all the software around that. That seems to be my problem though ... as I try to write code (I'm pretty fluent at C++) I always sit there enormous amounts of time in front of a text-editor wondering how every line, statement, datum, function, etc. will correspond to every Assembly and machine instruction performed to do absolutely everything necessary for the kernel to allocate memory to run my compiled program, and all of the other hardware being used as well. For example ... I would write cout << "Before memory changed" << endl; and run the debugger to get the Assembly for this, and then try and reverse disassemble the Assembly to machine code based on my ISA, and then research every .dll, library file, linked library, linking process, linker source code of the program, the make file, the kernel I'm using's steps of processing this compilation, the hardware's part aside from the processor (e.g. video card, sound card, chipset, cache latency, byte-sized registers, calling convention use, DDR3 RAM and disk drive, filesystem functioning and so many other things). Am I going about programming wrong? I mean I feel I should know everything that goes on underneath English syntax on a computer program. But the problem is that the more I research every little thing the less I actually accomplish at all. I can never finish anything because of this mentality, yet I feel compelled to know everything... what should I do?

  Read the article

• Asus A8V overcurrent

  - by user139710

  This is not as much as a question as it is a note to those out there that upgrade their motherboards with better processors and the like. Here's my story. Recently I upgraded my processor. System specifications: • Asus A8V Deluxe • 4GB RAM • ATI Radeon 3870 AGP graphics card (I believe that's it) Anyway, I decided to put a dual core Opteron 180 in this rig, but the problem was that I needed to update the BIOS to V-1017, and not knowing the consequences, I went up to the Asus site and got the newest, the latest and the greatest, 1018.002 thinking that it was the best for this board, however it wasn't. I used the Asus EXFlash, which makes life a lot easier, flashed the BIOS and all of a sudden I start getting this message: USB overcurrent protection, system shutting down in 15 seconds to protect your system. WELL SHIT... This is a new one on me... I read the blogs, all the posts on this thing, and did all that everyone else did to correct the problem, but nothing helped. So i decided to start from square one, went back to Asus and looked at the BIOS download... OMG... IT WAS A BETA. So, I downloaded the update that was suggested 1017< and installed it and wouldn't you know, it took care of the problem, no more USB overcurrent protection, no more crashing. I write this today to let you all know about this, just in case you have an issue such as this. Well there you all go. Fly safe and eat your vegetables.

  Read the article

• How to reduce the CPU load on a hosting with WordPress installed as a CMS? [on hold]

  - by Akky Awesøme

  I have been using hostgators hatchling plan for three months. I got an email from the hosting that my website is creating an over load on CPU. They said that I am eating up their processor and as a precaution, they have temporarily suspended my account. When I contacted their customer support, they said: You have to optimize your database and use some sort of caching mechanism, where the script does not need to generate a new page with every request, helps to lower the over load that a script will cause. I am not a technical geek, I am wondering how I will do this thing. I don't have any resource to hire a web developer to do this job. My website is down for 48hours. I was using wp super cache along with cloudfare's free support. Now I have intalled optimize-db plugin and optimized my database. Please provide me with some more tips on how to optimize my database to reduce CPU usage. Any help would be appreciated.

  Read the article

• Ubuntu live cd : black screen and blinking cursor

  - by IFasel

  I try to install ubuntu 12.04 on my computer. I can get to the purple screen on the live cd but then, if I choose "Installing Ubuntu", I have a black screen with a cursor blinking (and nothing else happens). My PC : acer aspire M3920, CPU i5-2300, 8 Gb RAM, NVIDIA gt 405. What I already tried : I tried with 12.04 and 13.04 daily build I tried with a live usb and with a live dvd I tried the following boot options : nomodset, acpi=off I googled a lot and it seems that it could be a graphic card problem. Do you know any other boot options that I could try ? UPDATE This is not a duplicate : I've tried all the common boot options (nomodeset, noacpi...) and it doesn't change anything. With the option "no splash" (instead of "quiet splash"), I can see what happens before the forever-blinking cursor : [sdg] no caching mode present [sdg] assuming drive cache : write trough ata8.00: excetion Emask 0x52 ... frozen ata8 : SError : { RecovData RecovComm UnrecovData...} ata8.00 : failed command : IDENTIFY PACKET DEVICE ... ata8.00 : status : { DRDY } ata8 : hard resetting link Does somebody know what it means ? N.B. astonishingly, Puppy Linux boots fine (but Debian, Fedora and Ubuntu do not) Solution In fact, it was not a graphic card problem. I had to disconnect the dvd drive and connect it to another free sata connector (I don't really understand why Ubuntu had trouble with this connector and Windows 7 not). After that, everything worked fine.

  Read the article

• Neverending issues with grub (ubuntu 14.04 on ASUS with Win8 dual boot)

  - by Mariana

  This is the most frustrating issue I have ever run into using Ubuntu and Windows in the same machine. I have an ASUS K46CB, 6GB RAM and preinstalled Windows 8.1 64-bits. I have successfully installed Ubuntu 14.04 LTS, also 64-bits. To do so,I followed this tutorial whenever possible. I only failed on the disable secure boot part: there is no 'Secure-boot' or even UEFI mention in my BIOS! Screenshots from other BIOS of the same model show the option under Boot, but in mine there is absolutely none. Because of this, I cannot boot into Ubuntu. The computer loads straight into Windows. I tried running boot repair, but got an error (i can show the log, but it's pretty long). Does anyone know how to fix this issue? UPDATE I reinstalled Ubuntu. Same problem, goes straight to Window. Boot-Repair informs me that i am using Windows in Legacy mode. It excecuted with no errors this time, but after restarting GRUB was still missing. I can't turn off Secure Boot yet. UPDATE I tried using Boot Repair to install grub on a boot-grub 1mb partition. Still boots straight to windows. I feel like punching something

  Read the article

• Amazon EC2 vs Dedicated server at Hetzner, what's the use for EC2?

  - by C-Blu

  After searching the web I still can't find the reason to use EC2. What's the point to scale EC2? If you expect a huge burst in traffic, they say. OK, but what if you already have a couple of sites with good traffic, and for example medium reserved EC2 instance is not enough. You are paying $36.60(medium reserved for 1year) in EU(Ireland) + traffic + optional expenses for databases and S3 if you use them. Of course as some point when you are under $56.6-$66.1 you can optimize your hosting costs with Amazon EC2. But when you get at some point if purchase EX4 server from Hetzner, it will surpass your perfomance needs for a long time, before you get a massive traffic. (I am wrong?) CPU: i7-2600 Quadcore (3.4-3.8 Ghz) RAM: 16 GB HDD: 2x3 TB SATA (6 Gbit/s) - I think that disc performance of a dedicated is better then of Amazon EBS Traffic: 10 TiB in month included. This is what you get from Hetzner for $56(- 19% VAT) or $66 for EU residents. Please, tell me what's the reason to use Amazon? Which load won't a server from Hetzner take, but Amazon Auto Scaling will? The maintenance of dedicated vs EC2 is still the same? Or hardware failure at Amazon, won't ruin your EBS storage? I'm still not at the level when I need expensive hosting, but want to know beforehand, just to be sure if Amazon infrastructure is better then pure performance of Hetzner's hardware.

  Read the article

• Preferred way for dealing with customer-defined data in enterprise application

  - by Axarydax

  Let's say that we have a small enterprise web (intranet) application for managing data for car dealers. It has screens for managing customers, inventory, orders, warranties and workshops. This application is installed at 10 customer sites for different car dealers. First version of this application was created without any way to provide for customer-specific data. For example, if dealer A wanted to be able to attach a photo to a customer, dealer B wanted to add e-mail contact to each workshop, and dealer C wanted to attach multiple PDF reports to a warranty, each and every feature like this was added to the application, so all of the customers received everything on new update. However, this will inevitably lead to conflicts as the number of customers grow as their usage patterns are unique, and if, for instance, a specific dealer requested to have an ability to attach (for some reason) a color of inventory item (and be able to search by this color) as a required item, others really wouldn't need this feature, and definitely will not want it to be a required item. Or, one dealer would like to manage e-mail contacts for their employees on a separate screen of the application. I imagine that a solution for this is to use a kind of plugin system, where we would have a core of the application that provides for standard features like customers, inventory, etc, and all of the customer's installed plugins. There would be different kinds of plugins - standalone screens like e-mail contacts for employees, with their own logic, and customer plugin which would extend or decorate inventory items (like photo or color). Inventory (customer,order,...) plugins would require to have installation procedure, hooks for plugging into the item editor, item displayer, item filtering for searching, backup hook and such. Is this the right way to solve this problem?

  Read the article

• IIS 7 SSO stops working during high CPU load? [migrated]

  - by DanB

  On our IIS7 site (Windows 2008 Server), we have set up single sign-on (SSO). It seems to work fine most of the time, but when the CPU load becomes high, SSO authentication completely stops working. I did some research and tried this suggestion to increase the max number of worker processes in the default app pool, but the increase did not help. Some details: The site is a WordPress blog. The server has plenty of RAM (2 GB) and free disk space. SSO is achieved by putting a copy of the WordPress login page (wp-login.php) into a subfolder below the root that has anonymous authentication disabled, and then redirecting the browser to it. This was the recommendation of Microsoft given to our consultants. To increase CPU load for testing, I have three scripts hit the home page simultaneously, over and over. This drives CPU to 100%. When these scripts are running, SSO authentication simply doesn't happen. As soon as I stop the scripts, SSO works again. (I should mention that the SSO problem also happens when many users visit the site at once....) The WordPress database process (mysqld) is not stressed at all by the scripts. I would be happy to provide further diagnostics. Any help appreciated!

  Read the article

• Web hosting company basically forces me to use their domain name [closed]

  - by Jinx

  I've recently stumbled upon an unusual problem with one of hosting companies called giga-international.com. Anyway, I've ordered com.hr domain from Croatian domain name registration company, and my client insisted on using this host provider as couple of his friends already are hosted with them. I thought something was fishy when the first result on Google for Giga International was this little forum rant instead of their webpage. When I was checking their services they listed many features etc... space available, bandwidth etc. I just wanted to check how much ram do I get for my PHP scripts so I emailed them, and they told me that was company secret. Seriously? Anyway, since my client still insisted on hosting with them I've bought their Webspace package. During registration I had to choose free domain name because I couldn't advance registration without it. Nowhere was said, not even in general terms and conditions that I wouldn't be able to change that domain name. At least not for double the price of domain name per year. They said I can either move my domain name over to them (and pay them domain registration), or pay them 1 Euro per month for managing a DNS entry. On any previous hosting solution I was able to manage my domain names just by pointing my domain to their name servers, and this is something completely new and absurd for me. They also said that usual approach is not possible because of security and hardware limitations. I'd like to know what you guys think about this case, and should I report, and where should I report this case. In short. They forced me to register free domain name which doesn't suit my needs in order to register for their webspace package, and refuse to change domain name for my account until I either transfer domain to them or pay them DNS management which costs double the price of the domain name per year.

  Read the article

• How do I turn off PCI devices?

  - by ethana2

  With the purchase of an Intel SSD and 85WHr Li-ion battery and the linking of wifi and bluetooth to my laptop's wireless switch, extensive Intel PowerTop usage, switching from compiz to metacity, stopping of the desktop-couch daemon, removal of Ubuntu One and several other services from my startup, disabling of everything possible in my BIOS, and physical removal of my optical drive, I've gotten my battery life up fairly high, but I think there's still more to be done. Specifically, when I'm in class taking notes, I want to temporarily but completely power down: Ethernet Firewire USB ports SD card reader Optical drive Webcam Sound card PCMCIA slot ..without turning them off in my BIOS like they are now, if possible, because then I have to restart my computer to use any of them. As it stands, I still haven't managed to power down: Firewire USB connection to webcam sound card How do I tell Linux to disable and power down these devices? Is it true that any PCI slot can be physically powered down? My current idle power consumption is 7.9 watts plus the screen. (10.0W at min. brightness) Also, how do I set the screen timeout to ten seconds? gconf editor isn't honoring it when I set it to that. Will switching from nVidia to Nouveau save any significant amount of power?

  Read the article

• Old Fglrx Driver - AMD Radeon HD 3200 - ubuntu won't start

  - by Yohannes

  I've been using Ubuntu 12.04 64 bit for about 2 weeks now and I installed the latest Fglrx driver (Graphics Card- AMD HD 3200, PC- Acer Aspire 5336, 4GB RAM, 500GB Harddrive). The problem is that sometimes video's lag and play out of sync sometimes the windows take long to show up after I've clicked them etc. After looking around I found a video on Youtube by Ubuntu help guy and in the video he recommended using an older driver if you have an older graphics card, his was about 4 years old (same as mine) and he used the 11.10 catalyst driver so I decided to try it. I removed the previous installation of the driver and then installed the 11.10 driver. However, when I restarted it instead of going to the GUI it goes to a terminal like window and asks for my login. Now its pretty clear I need to remove the old driver and go back to using the latest one. The only problem is I'm not sure where I saved the latest driver and in order to connect to the Internet I need to change /etc/resolv.conf (I use a static IP). So what should I do? Also anyone from personal experience, what propitiatory driver works best with my graphics card? As in the version. Thanks

  Read the article

• Random compositing lag

  - by user1020567

  My laptop specs: 512 mb of RAM, out of which 64 mb are shared with an integrated GPU - ATI Radeon Xpress 200 M. Intel 1,6 Ghz Celeron M single-core processor. I've spent months trying to figure out why compositing and effects sometimes lag on any distro I try. Now I've come to realise that no matter what drivers I try (the default ones work for me on pretty much any linux) compositing lag is random. When I used Ubuntu 10.10, for example, sometimes window compositing would lag and sometimes it wouldn't. The PC is able to render those effects so hardware is not the problem. It's completely random and unpredictable - sometimes when I turn on the computer the effects lag horribly and sometimes it's completely smooth. I've also checked startup items and there doesn't seem to be any unnecessary entries. I also tried building my own OS with Arch Linux and the problem persists there, therefore I can only assume that it's a driver issue of some sort. By default there are lots of drivers supplied with linux distributions. Could it be that they're in the way? The ones that I need are ati/radeon (or both? What's the difference between them?) and there seem to be a lot of others... What should I do?

  Read the article

• Most efficient Implementation a Tree in C++

  - by Topo

  I need to write a tree where each element may have any number of child elements, and because of this each branch of the tree may have any length. The tree is only going to receive elements at first and then it is going to use exclusively for iterating though it's branches in no specific order. The tree will have several million elements and must be fast but also memory efficient. My plan makes a node class to store the elements and the pointers to its children. When the tree is fully constructed, it would be transformed it to an array or something faster and if possible, loaded to the processor's cache. Construction and the search on the tree are two different problems. Can I focus on how to solve each problem on the best way individually? The construction of has to be as fast as possible but it can use memory as it pleases. Then the transformation into a format that give us speed when iterating the tree's branches. This should preferably be an array to avoid going back and forth from RAM to cache in each element of the tree. So the real question is which is the structure to implement a tree to maximize insert speed, how can I transform it to a structure that gives me the best speed and memory?

  Read the article

• Windows Defender Update KB915597 (Definition 1.135.415.0)? Killed My Live Discs

  - by user88311

  Here's my problem, for those willing to read for about 2 minutes here's the entire story, http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/bsod-after-windows-defender-update-kb915597/a4b5fca3-0274-47b4-97c4-61b34c4c4599, for those who want the short version here's what happened. After windows update automatically updated windows defender to kb915597, my computer starting getting bsods on shut down and start up and started experiencing problems withe the usb ports. So I decided to go to the microsoft answers site for help, I know that was probably my first mistake, so I followed their advice and they turned my computer into a large paper weight. Luckily I make physical backups of my c drive every few months and I have one from back in july, so I figured I'd boot up a ubuntu live disc, copy all my files from the past 2 months to a external drive and just copy the backup back to the c drive, that's where I ran into this problem. When I put in either a ubuntu or kubuntu disc, everything goes well, until it finishes the loading bar then when the OS would presumably start up, the computer resets, I've tried with ubuntu, kubuntu and gparted, and only gparted is able to get to the point where it starts up, but even then when I try to access the internet from it, the computer resets, and when I tried to copy the entire C drive partition to a blank external I wasn't able to. So I figured somehow maybe the C drive had something to do with it, so I unplugged the C drive so my computer was just a 2.8 ghz processor and 2 gigs of ram, should have had no problem starting a live disc but the problem still continues. After doing some googling around I've found whenever windows gets a update with the title KB915597 it's pretty much the kill switch for windows, I've tried contacting microsoft tech support and even managed to directly contact a software engineer but as soon as I mention KB915597 they all just blew me off. I hope anybody who reads this has any idea how to fix this, I'm going to attempt to install ubuntu or kubuntu to a external drive using the same computer and see what happens now.

  Read the article

• Usb stick too slow to benchmark?

  - by user85340

  I have a Core 2 Duo [email protected] with 3GB RAM. After some time using XUbuntu 10.10 on an 8GB stick I decided to switch to 12.04 and put it onto a 32GB stick (Transcend). I use an EXT4 with no journalling, noatime etc set. /tmp and /run is using tmpfs. And it is REALLY slow. MUCH slower than the old Xubuntu on the 8GB stick. Starting takes minutes, all applications "fade" because they respond too slow. I first thought that the NVidia graphics card is responsible for this, because there seem to be some known problems with that. Doing the adjustment (uncheck the sync checkbox) did not help. I believe the root cause is that the access to the USB stick is extremely slow. Running the read benchmark of the disk utility then brought the message "disk is too slow to benchmark"! BUT: When I do the same benchmark with the live CD I get around 20MB read performance and have a very responsive system! So how can I find out what is going one here?

  Read the article

• Why is my USB data transfer so slow?

  - by Dave M G

  Whenever I do any kind of file transfer using USB, whether to a USB stick, or with my Android phone, or anything else, it is ridiculously slow. It says 59.8 KB/sec, which would be an awesome speed if this were 1991 and I was using a modem to dial up to my local BBS. Surely USB technology is better than that...? 37 seconds to move less data than the equivelent of 1 MP3 file? Also, regardless of what it says about speed and time, the reality is much, much slower. I routinely see it say something like "37 seconds left" and have to wait for minutes. Sometimes, if I want to move large amounts of files, it can say it will take 8 hours or more. Is this normal? My computer may not be the most awesome on the market, and about a year old, but it's an i5 with 4GB RAM and modern components, so surely this isn't the hardware's fault. What can I do to get better USB data transfer performance? Also, I did look at this question, but my newbie eyes don't see anything that look like an actual solution, just a lot of discussion about what transfer rates could or should be. Update: As requested in the comments, I've generated a whole bunch of output from the command line, and put it on Ubuntu Pastebin. Please see it here.

  Read the article

• Freeze on Boot WindowsXP

  - by kyle

  Ok first off I know I should have Windows 7 but i don't Its a really old computer and i'm not sure if it can run the latest OS of ubuntu but i'm trying any whay so here are my specs or what i could have gathered from the computer(viruses are every where and most of the drivers are gone) Specs OS WindowsXP(it isn't letting me know which one that is blocked) Graphics card(can't access device manger it is blocked also) graphics card is 2003-2004 era though ram 512mb last time i checked USB(Drivers Gone) Wireless Card(Drivers Gone) Lan Card(Drivers Gone) Audio(Drivers Gone) CD Drive (it runs and works but i can't check its properties that's blocked to) Computer Dell Inspiron 600m Good News I have the Driver CD for everything Bad News I Don't have the OS CD I know the Computer is trash but i want to flash it anyway and just install linux(ubuntu) The second problem is it doesn't even want to load the CD all the way it is just stuck at the Ubuntu Screen with all the bubbles orange and if i resart it just does it again. any help would be nice. EDIT: okay i tried the first comment and it said i need a firmware file from http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware the firmware is b43/ucode5.fw, b43-open/ucode5.fw is there any other way of installing this firmware without being in the Ubuntu because what I have read is I need to be in Ubuntu to do this... Thanks for all the help you are giving me i have read your comments but i don't want to wait another two hours downloading that if i can get it working on this...

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >