Search Results

Search found 12848 results on 514 pages for 'multi core'.

Page 271/514 | < Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >

  • MODI leaking memory

    - by Khragg
    I have an app where I'm using MODI 2007 to OCR several multi-page tiff files. I have found that when I kick it off on a directory that contains several good tiffs but also some tiffs that cannot be opened in Windows Picture and Fax Viewer, then MODI also fails to OCR those "bad" tiffs. When this happens, the app is unable to reclaim any of the memory that was used by MODI to OCR those tiffs. After the tool tries to OCR too many of these "bad" tiffs, the machine runs out of memory and the app crashes. I have tried several code fixes from the web that supposedly fix any MODI memory leaks, but so far none have worked for me. I am pasting in the part of the code below that does the OCRing: StringBuilder strRecText = new StringBuilder(10000); MODI.Document doc1 = new MODI.Document(); doc1.Create(name); try { doc1.OCR(MODI.MiLANGUAGES.miLANG_ENGLISH, true, true); // this will ocr all pages of a multi-page tiff file } catch (Exception e) { doc1.Close(false); // clean up if (doc1 != null) { GC.Collect(); GC.WaitForPendingFinalizers(); GC.Collect(); GC.WaitForPendingFinalizers(); System.Runtime.InteropServices.Marshal.FinalReleaseComObject(doc1); doc1 = null; } } MODI.Images images = doc1.Images; for (int imageCounter = 0; imageCounter < images.Count; imageCounter++) { if (imageCounter > 0) { if (!noPageBreakFlag) { strRecText.Append((char)pageBreakChar); } } MODI.Image image = (MODI.Image)images[imageCounter]; MODI.Layout layout = image.Layout; strRecText.Append(layout.Text); GC.Collect(); GC.WaitForPendingFinalizers(); GC.Collect(); GC.WaitForPendingFinalizers(); if (layout != null) { System.Runtime.InteropServices.Marshal.FinalReleaseComObject(layout); layout = null; } if (image != null) { System.Runtime.InteropServices.Marshal.FinalReleaseComObject(image); image = null; } } File.AppendAllText(ocrFile, strRecText.ToString()); // write the OCR file out to disk GC.Collect(); GC.WaitForPendingFinalizers(); GC.Collect(); GC.WaitForPendingFinalizers(); if (images != null) { System.Runtime.InteropServices.Marshal.FinalReleaseComObject(images); images = null; } GC.Collect(); GC.WaitForPendingFinalizers(); GC.Collect(); GC.WaitForPendingFinalizers(); doc1.Close(false); // clean up if (doc1 != null) { System.Runtime.InteropServices.Marshal.FinalReleaseComObject(doc1); doc1 = null; } GC.Collect(); GC.WaitForPendingFinalizers(); GC.Collect(); GC.WaitForPendingFinalizers();

    Read the article

  • Green System Administrator looking for helpful tips

    - by Joshua Anderson
    I have just been promoted to Systems Administrator for our product. We are designing a application that communicates with the cloud(Amazon EC2). I will be in charge of maintaining all Instances and their underlying components. So far this involves a set of load balanced services instances that connect to a central DB in a multi-tennant DB design. Im interested in what other Sys. Admins have discovered as invaluable tools or practices. Any resources provided will be greatly appreciated.

    Read the article

  • Parsing a file with hierarchical structure in Python

    - by Kevin Stargel
    I'm trying to parse the output from a tool into a data structure but I'm having some difficulty getting things right. The file looks like this: Fruits Apple Auxiliary Core Extras Banana Something Coconut Vegetables Eggplant Rutabaga You can see that top-level items are indented by one space, and items beneath that are indented by two spaces for each level. The items are also in alphabetical order. How do I turn the file into a Python list that's something like ["Fruits", "Fruits/Apple", "Fruits/Banana", ..., "Vegetables", "Vegetables/Eggplant", "Vegetables/Rutabaga"]?

    Read the article

  • Where is Castle's AbstractFacility class?

    - by ripper234
    I am trying to compile Castle.Facilities.ActiveRecordIntegration with the trunk version of Castle.Core. ARIntegration uses 'AbstractFacility', which sits in the Castle.MicroKernel DLL. The DLL is now nowhere to be found. Where is ARIntegration/MicroKernel? How do I proceed?

    Read the article

  • Index out of bounds error

    - by sprasad12
    Hello, I am working on a program where i am recreating the saved widgets back on to the boundary panel. When i am creating them i am also trying to put the values into the ArrayList so that if i want to update and save the opened project i should be able to do so by getting the values from the ArrayList. Here is how the code looks like: for(int i = 0; i < result.length; i++){ if(ename.contains(result[i].getParticipateEntityName())){ ername.add(ename.indexOf(result[i].getParticipateEntityName()), result[i].getParticipateRelatioshipName()); etotalpartial.add(ename.indexOf(result[i].getParticipateEntityName()), result[i].getTotalPartial()); }else if(wename.contains(result[i].getParticipateEntityName())){ wrname.add(wename.indexOf(result[i].getParticipateEntityName()), result[i].getParticipateRelatioshipName()); } } Here ename, ername, etotalpartial, wename and wrname are all ArrayList. This piece of code is included in an asynchronous class method. When i run the code i get error at "ername.add(ename......". Here is the error stack: java.lang.IndexOutOfBoundsException: Index: 1, Size: 0 at java.util.ArrayList.add(ArrayList.java:367) at com.e.r.d.client.ERD1$16.onSuccess(ERD1.java:898) at com.e.r.d.client.ERD1$16.onSuccess(ERD1.java:1) at com.google.gwt.user.client.rpc.impl.RequestCallbackAdapter.onResponseReceived(RequestCallbackAdapter.java:216) at com.google.gwt.http.client.Request.fireOnResponseReceived(Request.java:287) at com.google.gwt.http.client.RequestBuilder$1.onReadyStateChange(RequestBuilder.java:393) at sun.reflect.GeneratedMethodAccessor16.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.google.gwt.dev.shell.MethodAdaptor.invoke(MethodAdaptor.java:103) at com.google.gwt.dev.shell.MethodDispatch.invoke(MethodDispatch.java:71) at com.google.gwt.dev.shell.OophmSessionHandler.invoke(OophmSessionHandler.java:157) at com.google.gwt.dev.shell.BrowserChannel.reactToMessagesWhileWaitingForReturn(BrowserChannel.java:1713) at com.google.gwt.dev.shell.BrowserChannelServer.invokeJavascript(BrowserChannelServer.java:165) at com.google.gwt.dev.shell.ModuleSpaceOOPHM.doInvoke(ModuleSpaceOOPHM.java:120) at com.google.gwt.dev.shell.ModuleSpace.invokeNative(ModuleSpace.java:507) at com.google.gwt.dev.shell.ModuleSpace.invokeNativeObject(ModuleSpace.java:264) at com.google.gwt.dev.shell.JavaScriptHost.invokeNativeObject(JavaScriptHost.java:91) at com.google.gwt.core.client.impl.Impl.apply(Impl.java) at com.google.gwt.core.client.impl.Impl.entry0(Impl.java:188) at sun.reflect.GeneratedMethodAccessor9.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.google.gwt.dev.shell.MethodAdaptor.invoke(MethodAdaptor.java:103) at com.google.gwt.dev.shell.MethodDispatch.invoke(MethodDispatch.java:71) at com.google.gwt.dev.shell.OophmSessionHandler.invoke(OophmSessionHandler.java:157) at com.google.gwt.dev.shell.BrowserChannel.reactToMessages(BrowserChannel.java:1668) at com.google.gwt.dev.shell.BrowserChannelServer.processConnection(BrowserChannelServer.java:401) at com.google.gwt.dev.shell.BrowserChannelServer.run(BrowserChannelServer.java:222) at java.lang.Thread.run(Thread.java:619) I am not sure what i am doing wrong. Any input will be of great help. Thank you.

    Read the article

  • What are the recommended BEST CASE hardware requirements for TFS 2010

    - by Doug
    Hi guys, i have installed TFS 2010 in a 2 server setup with an App Tier server and a SQL Server and am not 100% happy with the performance. Both are running in VM's on SAN disks and have been given the following virtual hardware each: Windows 2008 R2 1 CPU @ 2.8Ghz 2gb RAM what should i lift - neither machine is hammered but both do go up to 80% when people are doing things on them - should i add another CPU to each - usually this is now required in a VMWARE setup but i don't know if TFS 2010 takes advantage of an extra core??? thank you in advance :-)

    Read the article

  • CodeIgniter global variable

    - by Shishant
    Hello, I am using $data in all my views $this->load->view('my_view', $data); I have also autoload a Controller following this guide Extending Core Controller But I want to make $data global because in views there is a sidebar which is constant for whole project and displays info fetched through db in autoloaded controller Currently I have to manually write $data['todo'] for each and fetch info from autoloaded model. Thank You.

    Read the article

  • How to maximize http.sys file upload performance

    - by anelson
    I'm building a tool that transfers very large streaming data sets (possibly on the order of terabytes in a single stream; routinely in the tens of gigabytes) from one server to another. The client portion of the tool will read blocks from the source disk, and send them over the network. The server side will read these blocks off the network and write them to a file on the server disk. Right now I'm trying to decide which transport to use. Options are raw TCP, and HTTP. I really, REALLY want to be able to use HTTP. The HttpListener (or WCF if I want to go that route) make it easy to plug in to the HTTP Server API (http.sys), and I can get things like authentication and SSL for free. The problem right now is performance. I wrote a simple test harness that sends 128K blocks of NULL bytes using the BeginWrite/EndWrite async I/O idiom, with async BeginRead/EndRead on the server side. I've modified this test harness so I can do this with either HTTP PUT operations via HttpWebRequest/HttpListener, or plain old socket writes using TcpClient/TcpListener. To rule out issues with network cards or network pathways, both the client and server are on one machine and communicate over localhost. On my 12-core Windows 2008 R2 test server, the TCP version of this test harness can push bytes at 450MB/s, with minimal CPU usage. On the same box, the HTTP version of the test harness runs between 130MB/s and 200MB/s depending upon how I tweak it. In both cases CPU usage is low, and the vast majority of what CPU usage there is is kernel time, so I'm pretty sure my usage of C# and the .NET runtime is not the bottleneck. The box has two 6-core Xeon X5650 processors, 24GB of single-ranked DDR3 RAM, and is used exclusively by me for my own performance testing. I already know about HTTP client tweaks like ServicePointManager.MaxServicePointIdleTime, ServicePointManager.DefaultConnectionLimit, ServicePointManager.Expect100Continue, and HttpWebRequest.AllowWriteStreamBuffering. Does anyone have any ideas for how I can get HTTP.sys performance beyond 200MB/s? Has anyone seen it perform this well on any environment?

    Read the article

  • Free IP address management software

    - by TiFFolk
    We are choosing a system for managing our IP address space. So we are looking for a special free software like IPPlan. So what we have nowadays: Ipplan (Does not support IPv6) SolarWinds IP address tracker (IPv6 support unknown ) IP module of The NOC Project (BTW, take a look of it, seems to be very promising project) (IPv6 support unknown ) phpIP (Does not support IPv6) IP management from RackTables (Does not support IPv6) Do you know about any other special software, like written above? But: No Wiki No DNS No DHCP No spreadsheet Software should provide: Clear view of available addresses Detail listing of all addresses by subnets/search pattern/owners/additional info It must support adding additional info like owner of IP, domain-name, contacts, etc Multi user support Easy interface Software has to be specially written for address management. Scalability Any OS: win, lin, sol, web

    Read the article

  • eclipse CDT codeassist doesnt work

    - by CodeMedic
    For some strange reason, my CDT code assist in the project I have been working doesn't seem to work anymore. Any idea where to look for? I did try removing the project's file ~/workspace/.metadata/.plugins/org.eclipse.cdt.make.core/MY-PROJECT.sc

    Read the article

  • Sonar and Eclipse IAM Plugin

    - by Hans Klock
    When I am using the IAM Eclipse Plugin for Maven I get an error while executing the sonar:sonar goal in clean install sonar:sonar The error in eclipse is 23:02:55 MESZ Starting Starting mojoExecution sonar-core:internal 23:03:44 MESZ fatal org.sonar.maven2.BatchMojo#execute() caused a linkage error (java.lang.NoSuchMethodError). Check the realms: ... java.lang.NoSuchMethodError: org.apache.maven.execution.ReactorManager.<init>(Ljava/util/List;)V Any idea how to fix it?

    Read the article

  • Amazon RDS Pros/Cons of Multiple DBs per instance

    - by Joe Flowers
    I run two completely independent websites. I am moving their MySQL databases to Amazon RDS. I'm not going to do Multi A/Z deployment - let's remove that variable from this question. I'm not sure whether to create a single RDS instance with two databases, or two Amazon RDS instances with a single database. Ignore cost for the sake of this question. I will not hit the 1 TB data limit so let's ignore that. However, it is extremely important that crashing one of the websites doesn't impact the other. Based on this document - http://docs.amazonwebservices.com/AmazonRDS/latest/UserGuide/Concepts.DBInstance.html I'm assuming that if I write terrible code that crashes one of the databases in a given RDS instance, it could possibly take down the entire RDS instance (and thus inadvertantly affect the other database). Is that correct? Thanks

    Read the article

  • DB2 users and groups

    - by Arun Srini
    Just want to know everyone's experience and take on managing users/authentication on a multi-node db2 cluster with users groups. I have 17 apps in production (project based company, only 2 online apps), and some 30 users with 7 groups. prodsel - group that has select privilege on all tables produpdt - update group on selective tables (as required by the apps) proddel - delete prodins - insert permissions for the group Now what my company does is when an app uses certain user (called app1user), and needs select and insert privilege on a table, they 1. grant select and insert for prodsel, prodins respectively 2. add the user under those two groups... now this creates one to many relationship between user and privileges, and this app1user also gets select on other tables granted for the prodsel group. I know this is wrong. Before I explain, I need to know how this is done elsewhere. Please share your experiences, even if you use other Databases that uses OS level authentication.

    Read the article

  • IDynamicObject could not be found?!

    - by cvista
    When trying to run the sample code here: http://www.nikhilk.net/Live-Search-REST-API.aspx I get: Error 52 The type or namespace name 'IDynamicObject' could not be found (are you missing a using directive or an assembly reference?) E:\repo\NikhilK-dynamicrest-a93707a\NikhilK-dynamicrest-a93707a\Core\DynamicObject.cs 19 43 DynamicRest The project is running .net 4 - shouldn't this be a part of the standard imports? am i missing something? What do i need to do to make this work?

    Read the article

  • Sql Server database logs "missing"

    - by linkerro
    Here's the problem we're having: In the applications that are using the databases we get errors like: The log for database 'redactedDatabaseName' is not available. Check the event log for related error messages. Resolve any errors and restart the database. Cannot close event log because there are still event handle users active. The server log says this: Error: 9001, Severity: 21, State: 1. Context: The server in question is holding databases for a multi-tenant application and lately it's been under quite heavy loads. It has something like 3k small databases on it and these errors have been coming in the last week. We have a work-around right now, which is taking the database offline then bringing it online again. Any ideas why this is happening and how we can fix it?

    Read the article

  • how can make transparent proxy on more than one port?

    - by ermya
    i want to make transparent proxy with linux ( centos) , i want all incoming connection on port 1000 - 2000 on eth0 forward to eth1 on port 1000 - 2000 in transparent mode i have 2 server 1- linux ( proxy server) 2- windows i want protect my windows server with my linux server firewall also i must make transparent proxy with my linux server linux server have 2 interface one for public network an another for private network connected to windows server so all incoming connection must connect to the linux server (at eth0 public network) first and after checking , must forward to the windows server on private network (with linux interface eth1 ) i can use squid for making transparent proxy but i dont know how i must config the squid for multi port because i want listen in more than 1000 ports for example from port 1000 to 2000 anyone know how can i do ?

    Read the article

  • Having Many Problems with Jquery UI 1.8.1 Dialog.js

    - by chobo2
    Hi I been using the jquery ui for quite a while now. This is the first time using 1.8 though and I am not sure why but it seems to me this plugin has taken steps backwards. I never had so much difficulty to use the Jquery UI as I am having now. First the documentation is out of date. Dependencies * UI Core * UI Draggable (Optional) * UI Resizable (Optional) After line 20mins of trying and getting error after error (like dialog is not a function) I realized that you need some other javascript file called "widget.js" So now I have Jquery 1.4.2.js UI Core.js UI Widget.js UI Dialog.js all on my page. I then did something like this $('#Delete').click(function () { var dialogId = "DeleteDialogBox"; var createdDialog = MakeDialogBox(dialogId, "Delete Conformation"); $('#tabConent').after(createdDialog); dialogId = String.format('#{0}', dialogId); $(dialogId).dialog({ resizable: true, height: 500, width: 500, modal: true, buttons: { 'Delete all items': function() { $(this).dialog('close'); }, Cancel: function() { $(this).dialog('close'); } } }); }); function MakeDialogBox(id, title) { var dialog = String.format('<div id="{0}" title="{1}"></div>', id, title); return dialog; } Now what this should be doing is it makes a where the dialog box should go. After that it should put it right after my tabs. So when watching it with firebug it does this. However once does the .dialog() method it moves the + all the stuff it generates and puts it after my footer. So now I have my dialog box under my footer tucked away in the bottom right hand corner. I want it dead in the center. In previous versions I don't think it mattered where the dialog code was on your page it would always be dead center. So what am I missing? The center.js(I don't know if this exists but seems like you need 100 javascript files now to get this to work proper).

    Read the article

  • Selenium IDE and Drupal

    Can I use Selenium IDE on a Drupal system? I found http://drupal.org/project/selenium but that involves downloading Core and not using my current machine. Does anybody know of a way to use the IDE with Drupal, or if not what do you suggest I do?

    Read the article

  • moving from Exchange 2003 to Exchange 2010

    - by pcampbell
    Consider a small-medium business' deployment of Exchange 2003. The question is around migrating to Exchange 2010. Here's a bit about the landscape: Current state is 50-100 users/mailboxes with the majority using Outlook 2007 OWA enabled desktop users are NOT running in Cached Exchange Mode laptops users ARE running in Cached Exchange Mode a single Exchange server with modest or reasonable specs for the day (3gz, multi-core, 4gb, Win 2003 32-bit) Questions Do you have any suggestions for the admin team regarding the upgrade path/steps from Exchange 2003 to 2010? Considering the requirement of a 64 bit OS, consider a new separate machine as ready to go with Win 2008. Have I missed any details? Where might virtualization help in this project? Any lessons learned in previous upgrades (2007 or 2010) would be appreciated!

    Read the article

< Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >