Search Results

Search found 22204 results on 889 pages for 'input devices'.

Page 272/889 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

  • NFS Mounts Issues

    - by user554005
    Having some issue with a NFS Setup on the clients it just times out refuses to connect [root@host9 ~]# mount 192.168.0.17:/home/export /mnt/export mount: mount to NFS server '192.168.0.17' failed: timed out (retrying). mount: mount to NFS server '192.168.0.17' failed: timed out (retrying). mount: mount to NFS server '192.168.0.17' failed: timed out (retrying). mount: mount to NFS server '192.168.0.17' failed: timed out (retrying). Here are the settings I'm using: [root@host17 /home/export]# cat /etc/hosts.allow # # hosts.allow This file contains access rules which are used to # allow or deny connections to network services that # either use the tcp_wrappers library or that have been # started through a tcp_wrappers-enabled xinetd. # # See 'man 5 hosts_options' and 'man 5 hosts_access' # for information on rule syntax. # See 'man tcpd' for information on tcp_wrappers # portmap: 192.168.0.0/255.255.255.0 lockd: 192.168.0.0/255.255.255.0 rquotad: 192.168.0.0/255.255.255.0 mountd: 192.168.0.0/255.255.255.0 statd: 192.168.0.0/255.255.255.0 [root@host17 /home/export]# cat /etc/hosts.deny # # hosts.deny This file contains access rules which are used to # deny connections to network services that either use # the tcp_wrappers library or that have been # started through a tcp_wrappers-enabled xinetd. # # The rules in this file can also be set up in # /etc/hosts.allow with a 'deny' option instead. # # See 'man 5 hosts_options' and 'man 5 hosts_access' # for information on rule syntax. # See 'man tcpd' for information on tcp_wrappers # portmap:ALL lockd:ALL mountd:ALL rquotad:ALL statd:ALL [root@host17 /home/export]# cat /etc/exports /home/export 192.168.0.0/255.255.255.0(rw) [root@host17 /home/export]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination RH-Firewall-1-INPUT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination RH-Firewall-1-INPUT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain RH-Firewall-1-INPUT (2 references) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT icmp -- anywhere anywhere icmp any ACCEPT esp -- anywhere anywhere ACCEPT ah -- anywhere anywhere ACCEPT udp -- anywhere 224.0.0.251 udp dpt:mdns ACCEPT udp -- anywhere anywhere udp dpt:ipp ACCEPT tcp -- anywhere anywhere tcp dpt:ipp ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:http ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:https ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:6379 ACCEPT udp -- 192.168.0.0/24 anywhere state NEW udp dpt:sunrpc ACCEPT tcp -- 192.168.0.0/24 anywhere state NEW tcp dpt:sunrpc ACCEPT tcp -- 192.168.0.0/24 anywhere state NEW tcp dpt:nfs ACCEPT tcp -- 192.168.0.0/24 anywhere state NEW tcp dpt:32803 ACCEPT udp -- 192.168.0.0/24 anywhere state NEW udp dpt:filenet-rpc ACCEPT tcp -- 192.168.0.0/24 anywhere state NEW tcp dpt:892 ACCEPT udp -- 192.168.0.0/24 anywhere state NEW udp dpt:892 ACCEPT tcp -- 192.168.0.0/24 anywhere state NEW tcp dpt:rquotad ACCEPT udp -- 192.168.0.0/24 anywhere state NEW udp dpt:rquotad ACCEPT tcp -- 192.168.0.0/24 anywhere state NEW tcp dpt:pftp ACCEPT udp -- 192.168.0.0/24 anywhere state NEW udp dpt:pftp REJECT all -- anywhere anywhere reject-with icmp-host-prohibited on the clients here is some rpcinfos [root@host9 ~]# rpcinfo -p 192.168.0.17 program vers proto port 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100011 1 udp 875 rquotad 100011 2 udp 875 rquotad 100011 1 tcp 875 rquotad 100011 2 tcp 875 rquotad 100005 1 udp 45857 mountd 100005 1 tcp 55772 mountd 100005 2 udp 34021 mountd 100005 2 tcp 59542 mountd 100005 3 udp 60930 mountd 100005 3 tcp 53086 mountd 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100227 2 udp 2049 nfs_acl 100227 3 udp 2049 nfs_acl 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100227 2 tcp 2049 nfs_acl 100227 3 tcp 2049 nfs_acl 100021 1 udp 59832 nlockmgr 100021 3 udp 59832 nlockmgr 100021 4 udp 59832 nlockmgr 100021 1 tcp 36140 nlockmgr 100021 3 tcp 36140 nlockmgr 100021 4 tcp 36140 nlockmgr 100024 1 udp 46494 status 100024 1 tcp 49672 status [root@host9 ~]# [root@host9 ~]# rpcinfo -u 192.168.0.17 nfs rpcinfo: RPC: Timed out program 100003 version 0 is not available [root@host9 ~]# rpcinfo -u 192.168.0.17 portmap program 100000 version 2 ready and waiting program 100000 version 3 ready and waiting program 100000 version 4 ready and waiting [root@host9 ~]# rpcinfo -u 192.168.0.17 mount rpcinfo: RPC: Timed out program 100005 version 0 is not available [root@host9 ~]# I'm running CentOS 5.8 on all systems

    Read the article

  • ffserver-2.2 - streaming an ASF video as Webm output with ffserver on Debian 7.5

    - by Emmanuel Brunet
    I'm trying to stream an IP webcam ASF live stream to a ffserver to output a webm video format. The server starts successfully but the ffserver commands used to feed the ffserver fails and generates a core dump. Input stream $ ffprobe http://account:password@webcam/videostream.asf Input #0, asf, from 'http://account:password@webcam/videostream.asf': Duration: N/A, start: 0.000000, bitrate: 32 kb/s Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 25 tbr, 1k tbn, 1k tbc Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, 1 channels, s16p, 32 kb/s ffserver configuration my ffserver configuration is : Port 8091 RTSPPort 554 BindAddress 192.168.1.62 MaxHTTPConnections 1000 MaxClients 100 MaxBandwidth 1000 CustomLog - <Feed webcam.ffm> File /tmp/webcam.ffm FileMaxSize 500M ACL allow localhost ACL allow 192.168.0.0 192.168.255.255 </Feed> <Stream webcam.webm> # Output stream URL definition Feed webcam.ffm # Feed from which to receive video Format webm # Audio settings AudioCodec vorbis AudioBitRate 64 # Audio bitrate # Video settings VideoCodec libvpx VideoSize 640x480 # Video resolution VideoFrameRate 25 # Video FPS AVOptionVideo flags +global_header # Parameters passed to encoder # (same as ffmpeg command-line parameters) AVOptionVideo cpu-used 0 AVOptionVideo qmin 10 AVOptionVideo qmax 42 AVOptionVideo quality good AVOptionAudio flags +global_header PreRoll 15 StartSendOnKey # VideoBitRate 32 # Video bitrate </Stream> <Stream status.html> Format status # Only allow local people to get the status ACL allow localhost ACL allow 192.168.0.0 192.168.255.255 </Stream> ffmpeg feed I run the following command that fails $ ffmpeg -i http://account:password@webcam/videostream.asf http://ffserver_ip:port/webcam.ffm http://192.168.1.62:8091/webcam.ffm Input #0, asf, from 'http://account:password@webcam/videostream.asf': Duration: N/A, start: 0.000000, bitrate: 32 kb/s Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 25 tbr, 1k tbn, 1k tbc Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, mono, s16p, 32 kb/s [swscaler @ 0x36a80c0] deprecated pixel format used, make sure you did set range correctly Segmentation fault I tryed $ ffmpeg -i http://account:password@webcam/videostream.asf -pix_fmt yuv420p http://ffserver_ip:port/webcam.ffm But it raises the same error. Thanks for your help Edit For an easy testing (I thought), I tried to publish the whole ASF stream as is, meaning connecting the ASF webcam output stream to the ffserver that outputs ASF format too. And thus with mirrored encoding so I changed the ffserver configuration to ... <Stream webcam.asf> Feed webcam.ffm Format asf VideoFrameRate 25 VideoSize 640X480 VideoBitRate 256 VideoBufferSize 1000 VideoGopSize 30 AudioBitRate 32 StartSendOnKey </Stream> ... And the output is now : Input #0, asf, from 'http://admin:alpha1237@webcam/videostream.asf': Duration: N/A, start: 0.000000, bitrate: 32 kb/s Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 1k tbr, 1k tbn, 1k tbc Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, mono, s16p, 32 kb/s [swscaler @ 0x3d620c0] deprecated pixel format used, make sure you did set range correctly Output #0, ffm, to 'http://192.168.1.62:8091/webcam.ffm': Metadata: creation_time : now encoder : Lavf55.40.100 Stream #0:0: Audio: wmav2, 22050 Hz, mono, fltp, 32 kb/s Metadata: encoder : Lavc55.64.100 wmav2 Stream #0:1: Video: msmpeg4v3 (msmpeg4), yuv420p, 640x480, q=2-31, 256 kb/s, 1k fps, 1000k tbn, 1k tbc Metadata: Stream mapping: Stream #0:1 -> #0:0 (adpcm_ima_wav -> wmav2) Stream #0:0 -> #0:1 (mjpeg -> msmpeg4) Press [q] to stop, [?] for help Segmentation fault I can't even forward the stream. Thanks for your help again.

    Read the article

  • Simple GET operation with JSON data in ADF Mobile

    - by PadmajaBhat
    Usecase: This sample uses a RESTful service which contains a GET method that fetches employee details for an employee with given employee ID along with other methods. The data is fetched in JSON format. This RESTful service is then invoked via ADF Mobile and the JSON data thus obtained is parsed and rendered in mobile in a table. Prerequisite: Download JDev build JDEVADF_11.1.2.4.0_GENERIC_130421.1600.6436.1 or higher with mobile support.  Steps: Run EmployeeService.java in JSONService.zip. This is a simple service with a method, getEmpById(id) that takes employee ID as parameter and produces employee details in JSON format. Copy the target URL generated on running this service. The target URL will be as shown below: http://127.0.0.1:7101/JSONService-Project1-context-root/jersey/project1 Now, let us invoke this service in our mobile application. For this, create an ADF Mobile application.  Name the application JSON_SearchByEmpID and finish the wizard. Now, let us create a connection to our service. To do this, we create a URL Connection. Invoke new gallery wizard on ApplicationController project.  Select URL Connection option. In the Create URL Connection window, enter connection name as ‘conn’. For URL endpoint, supply the URL you copied earlier on running the service. Remember to use your system IP instead of localhost. Test the connection and click OK. At this point, a connection to the REST service has been created. Since JSON data is not supported directly in WSDC wizard, we need to invoke the operation through Java code using RestServiceAdapter. For this, in the ApplicationController project, create a Java class called ‘EmployeeDC’. We will be creating DC from this class. Add the following code to the newly created class to invoke the getEmpById method. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 public Employee fetchEmpDetails(){ RestServiceAdapter restServiceAdapter = Model.createRestServiceAdapter(); restServiceAdapter.clearRequestProperties(); restServiceAdapter.setConnectionName("conn"); //URL connection created with this name restServiceAdapter.setRequestType(RestServiceAdapter.REQUEST_TYPE_GET); restServiceAdapter.addRequestProperty("Content-Type", "application/json"); restServiceAdapter.addRequestProperty("Accept", "application/json; charset=UTF-8"); restServiceAdapter.setRetryLimit(0); restServiceAdapter.setRequestURI("/getById/"+inputEmpID); String response = ""; JSONBeanSerializationHelper jsonHelper = new JSONBeanSerializationHelper(); try { response = restServiceAdapter.send(""); //Invoke the GET operation System.out.println("Response received!"); Employee responseObject = (Employee) jsonHelper.fromJSON(Employee.class, response); return responseObject; } catch (Exception e) { } return null; } Here, in lines 2 to 9, we create the RestServiceAdapter and set various properties required to invoke the web service. At line 4, we are pointing to the connection ‘conn’ created previously. Since we want to invoke getEmpById method of the service, which is defined by the URL http://IP:7101/REST_Sanity_JSON-Project1-context-root/resources/project1/getById/{id} we are updating the request URI to point to this URI at line 9. inputEmpID is a variable that will hold the value input by the user for employee ID. This we will be creating in a while. As the method we are invoking is a GET operation and consumes json data, these properties are being set in lines 5 through 7. Finally, we are sending the request in line 13. In line 15, we use jsonHelper.fromJSON to convert received JSON data to a Java object. The required Java objects' structure is defined in class Employee.java whose structure is provided later. Since the response from our service is a simple response consisting of attributes like employee Id, name, design etc, we will just return this parsed response (line 16) and use it to create DC. As mentioned previously, we would like the user to input the employee ID for which he/she wants to perform search. So, in the same class, define a variable inputEmpID which will hold the value input by the user. Generate accessors for this variable. Lastly, we need to create Employee class. Employee class will define how we want to structure the JSON object received from the service. To design the Employee class, run the services’ method in the browser or via analyzer using path parameter as 1. This will give you the output JSON structure. Ours is a simple service that returns a JSONObject with a set of data. Hence, Employee class will just contain this set of data defined with the proper data types. Create Employee.java in the same project as EmployeeDC.java and write the below code: package application; import oracle.adfmf.java.beans.PropertyChangeListener; import oracle.adfmf.java.beans.PropertyChangeSupport; public class Employee { private String dept; private String desig; private int id; private String name; private int salary; private PropertyChangeSupport propertyChangeSupport = new PropertyChangeSupport(this); public void setDept(String dept) {         String oldDept = this.dept; this.dept = dept; propertyChangeSupport.firePropertyChange("dept", oldDept, dept); } public String getDept() { return dept; } public void setDesig(String desig) { String oldDesig = this.desig; this.desig = desig; propertyChangeSupport.firePropertyChange("desig", oldDesig, desig); } public String getDesig() { return desig; } public void setId(int id) { int oldId = this.id; this.id = id; propertyChangeSupport.firePropertyChange("id", oldId, id); } public int getId() { return id; } public void setName(String name) { String oldName = this.name; this.name = name; propertyChangeSupport.firePropertyChange("name", oldName, name); } public String getName() { return name; } public void setSalary(int salary) { int oldSalary = this.salary; this.salary = salary; propertyChangeSupport.firePropertyChange("salary", oldSalary, salary); } public int getSalary() { return salary; } public void addPropertyChangeListener(PropertyChangeListener l) { propertyChangeSupport.addPropertyChangeListener(l); } public void removePropertyChangeListener(PropertyChangeListener l) { propertyChangeSupport.removePropertyChangeListener(l);     } } Now, let us create a DC out of EmployeeDC.java.  DC as shown below is created. Now, you can design the mobile page as usual and invoke the operation of the service. To design the page, go to ViewController project and locate adfmf-feature.xml. Create a new feature called ‘SearchFeature’ by clicking the plus icon. Go the content tab and add an amx page. Call it SearchPage.amx. Call it SearchPage.amx. Remove primary and secondary buttons as we don’t need them and rename the header. Drag and drop inputEmpID from the DC palette onto Panel Page in the structure pane as input text with label. Next, drop fetchEmpDetails method as an ADF button. For a change, let us display the output in a table component instead of the usual form. However, you will notice that if you drag and drop Employee onto the structure pane, there is no option for ADF Mobile Table. Hence, we will need to create the table on our own. To do this, let us first drop Employee as an ADF Read -Only form. This step is needed to get the required bindings. We will be deleting this form in a while. Now, from the Component palette, search for ‘Table Layout’. Drag and drop this below the command button.  Within the tablelayout, insert ‘Row Layout’ and ‘Cell Format’ components. Final table structure should be as shown below. Here, we have also defined some inline styling to render the UI in a nice manner. <amx:tableLayout id="tl1" borderWidth="2" halign="center" inlineStyle="vertical-align:middle;" width="100%" cellPadding="10"> <amx:rowLayout id="rl1" > <amx:cellFormat id="cf1" width="30%"> <amx:outputText value="#{bindings.dept.hints.label}" id="ot7" inlineStyle="color:rgb(0,148,231);"/> </amx:cellFormat> <amx:cellFormat id="cf2"> <amx:outputText value="#{bindings.dept.inputValue}" id="ot8" /> </amx:cellFormat> </amx:rowLayout> <amx:rowLayout id="rl2"> <amx:cellFormat id="cf3" width="30%"> <amx:outputText value="#{bindings.desig.hints.label}" id="ot9" inlineStyle="color:rgb(0,148,231);"/> </amx:cellFormat> <amx:cellFormat id="cf4" > <amx:outputText value="#{bindings.desig.inputValue}" id="ot10"/> </amx:cellFormat> </amx:rowLayout> <amx:rowLayout id="rl3"> <amx:cellFormat id="cf5" width="30%"> <amx:outputText value="#{bindings.id.hints.label}" id="ot11" inlineStyle="color:rgb(0,148,231);"/> </amx:cellFormat> <amx:cellFormat id="cf6" > <amx:outputText value="#{bindings.id.inputValue}" id="ot12"/> </amx:cellFormat> </amx:rowLayout> <amx:rowLayout id="rl4"> <amx:cellFormat id="cf7" width="30%"> <amx:outputText value="#{bindings.name.hints.label}" id="ot13" inlineStyle="color:rgb(0,148,231);"/> </amx:cellFormat> <amx:cellFormat id="cf8"> <amx:outputText value="#{bindings.name.inputValue}" id="ot14"/> </amx:cellFormat> </amx:rowLayout> <amx:rowLayout id="rl5"> <amx:cellFormat id="cf9" width="30%"> <amx:outputText value="#{bindings.salary.hints.label}" id="ot15" inlineStyle="color:rgb(0,148,231);"/> </amx:cellFormat> <amx:cellFormat id="cf10"> <amx:outputText value="#{bindings.salary.inputValue}" id="ot16"/> </amx:cellFormat> </amx:rowLayout>     </amx:tableLayout> The values used in the output text of the table come from the bindings obtained from the ADF Form created earlier. As we have used the bindings and don’t need the form anymore, let us delete the form.  One last thing before we deploy. When user changes employee ID, we want to clear the table contents. For this we associate a value change listener with the input text box. Click New in the resulting dialog to create a managed bean. Next, we create a method within the managed bean. For this, click on the New button associated with method. Call the method ‘empIDChange’. Open myClass.java and write the below code in empIDChange(). public void empIDChange(ValueChangeEvent valueChangeEvent) { // Add event code here... //Resetting the values to blank values when employee id changes AdfELContext adfELContext = AdfmfJavaUtilities.getAdfELContext(); ValueExpression ve = AdfmfJavaUtilities.getValueExpression("#{bindings.dept.inputValue}", String.class); ve.setValue(adfELContext, ""); ve = AdfmfJavaUtilities.getValueExpression("#{bindings.desig.inputValue}", String.class); ve.setValue(adfELContext, ""); ve = AdfmfJavaUtilities.getValueExpression("#{bindings.id.inputValue}", int.class); ve.setValue(adfELContext, ""); ve = AdfmfJavaUtilities.getValueExpression("#{bindings.name.inputValue}", String.class); ve.setValue(adfELContext, ""); ve = AdfmfJavaUtilities.getValueExpression("#{bindings.salary.inputValue}", int.class); ve.setValue(adfELContext, ""); } That’s it. Deploy the application to android emulator or device. Some snippets from the app.

    Read the article

  • FFMPEG dropping frames while encoding JPEG sequence at color change

    - by Matt
    I'm trying to put together a slide show using imagemagick and FFMPEG. I use imagemagick to expand a single photo into 30fps video (imagemagick also handles things like putting some text captions on the frames along the way). When I go to let ffmpeg digest it into a video it clips along nicely on the color parts of the video, but when it gets to a black and white section it reports "frame= 2030 fps=102 q=32766.0 Lsize= 5203kB time=00:01:07.60 bitrate= 630.5kbits/s dup=0 drop=703" and drops every frame of video until it hits something with color. As you can imagine this results in entire photos being removed from the slideshow. Here is my latest dump... ffmpeg -y -r 30 -i "teststream/%06d.jpg" -c:v libx264 -r 30 newffmpeg.mp4 ffmpeg version git-2012-12-10-c3bb333 Copyright (c) 2000-2012 the FFmpeg developers built on Dec 10 2012 22:02:04 with gcc 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) configuration: --enable-gpl --enable-libfaac --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libtheora --enable-libvorbis --enable-libx264 --enable-nonfree --enable-version3 libavutil 52. 12.100 / 52. 12.100 libavcodec 54. 79.101 / 54. 79.101 libavformat 54. 49.100 / 54. 49.100 libavdevice 54. 3.102 / 54. 3.102 libavfilter 3. 26.101 / 3. 26.101 libswscale 2. 1.103 / 2. 1.103 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 2.100 / 52. 2.100 Input #0, image2, from 'teststream/%06d.jpg': Duration: 00:12:02.80, start: 0.000000, bitrate: N/A Stream #0:0: Video: mjpeg, yuvj444p, 720x480 [SAR 72:72 DAR 3:2], 25 fps, 25 tbr, 25 tbn, 25 tbc [libx264 @ 0x3450140] using SAR=1/1 [libx264 @ 0x3450140] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x3450140] profile High, level 3.0 [libx264 @ 0x3450140] 264 - core 129 r2 1cffe9f - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'newffmpeg.mp4': Metadata: encoder : Lavf54.49.100 Stream #0:0: Video: h264 ([33][0][0][0] / 0x0021), yuvj420p, 720x480 [SAR 1:1 DAR 3:2], q=-1--1, 15360 tbn, 30 tbc Stream mapping: Stream #0:0 - #0:0 (mjpeg - libx264) Press [q] to stop, [?] for help Input stream #0:0 frame changed from size:720x480 fmt:yuvj444p to size:720x480 fmt:yuvj422p Input stream #0:0 frame changed from size:720x480 fmt:yuvj422p to size:720x480 fmt:yuvj444pp=584 frame= 2030 fps=102 q=32766.0 Lsize= 5203kB time=00:01:07.60 bitrate= 630.5kbits/s dup=0 drop=703 video:5179kB audio:0kB subtitle:0 global headers:0kB muxing overhead 0.472425% [libx264 @ 0x3450140] frame I:9 Avg QP:20.10 size: 33933 [libx264 @ 0x3450140] frame P:636 Avg QP:24.12 size: 6737 [libx264 @ 0x3450140] frame B:1385 Avg QP:27.04 size: 514 [libx264 @ 0x3450140] consecutive B-frames: 2.5% 15.2% 13.2% 69.2% [libx264 @ 0x3450140] mb I I16..4: 8.3% 80.3% 11.5% [libx264 @ 0x3450140] mb P I16..4: 1.5% 2.5% 0.2% P16..4: 41.7% 18.0% 10.3% 0.0% 0.0% skip:25.9% [libx264 @ 0x3450140] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 26.6% 0.6% 0.1% direct: 0.2% skip:72.3% L0:35.0% L1:60.3% BI: 4.7% [libx264 @ 0x3450140] 8x8 transform intra:64.1% inter:75.1% [libx264 @ 0x3450140] coded y,uvDC,uvAC intra: 51.6% 78.0% 43.7% inter: 10.6% 14.9% 2.1% [libx264 @ 0x3450140] i16 v,h,dc,p: 29% 19% 6% 46% [libx264 @ 0x3450140] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 23% 15% 17% 5% 9% 10% 7% 8% 6% [libx264 @ 0x3450140] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 31% 18% 11% 5% 9% 10% 6% 6% 4% [libx264 @ 0x3450140] i8c dc,h,v,p: 46% 18% 24% 12% [libx264 @ 0x3450140] Weighted P-Frames: Y:20.1% UV:18.7% [libx264 @ 0x3450140] ref P L0: 59.2% 23.2% 13.1% 4.3% 0.2% [libx264 @ 0x3450140] ref B L0: 88.7% 8.3% 3.0% [libx264 @ 0x3450140] ref B L1: 95.0% 5.0% [libx264 @ 0x3450140] kb/s:626.88 Received signal 2: terminating. One last note: If I remove the -r 30 from the input and output it works flawlessly. I have no idea why the -r 30 is causing it to freak out.

    Read the article

  • Can not open port 3306 on Ubuntu using iptables

    - by user94626
    I am trying to open port 3306 (for remote mysql connections) on my ubuntu 12.04 server machine but for the life of me can't get the damned thing to work! Here is what I did: 1) list current firewall rules: $> sudo iptables -nL -v output: Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 225 16984 fail2ban-ssh tcp -- * * 0.0.0.0/0 0.0.0.0/0 multiport dports 22 220 69605 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- lo * 0.0.0.0/0 127.0.0.0/8 reject-with icmp-port-unreachable 486 54824 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1 60 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 19 988 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 1 52 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 8 4 208 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix "iptables denied: " 4 208 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 735 182K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (1 references) pkts bytes target prot opt in out source destination 225 16984 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 2) try to connect from remote machine: $> mysql -u root -p -h x.x.x.x output: timeout.... failed to connect 3) try to add a new rule to iptables: iptables -A INPUT -i eth0 -p tcp -m tcp --dport 3306 -j ACCEPT 4) make sure the new rule is added: $> sudo iptables -nL -v output: Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 359 25972 fail2ban-ssh tcp -- * * 0.0.0.0/0 0.0.0.0/0 multiport dports 22 251 78665 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- lo * 0.0.0.0/0 127.0.0.0/8 reject-with icmp-port-unreachable 628 64420 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1 60 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 19 988 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 1 52 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 8 5 260 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix "iptables denied: " 5 260 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 919 213K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (1 references) pkts bytes target prot opt in out source destination 359 25972 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 which appears to be the case (last line in "Chain INPUT" section). 5) try to connect again from remote machine: $> mysql -u root -p -h x.x.x.x output: timeout.... failed to connect which is failing again. 6) try to flush all rules: $> sudo iptables -F 7) this time I CAN CONNECT. 8) reboot server and try to connect, FAILURE. I suspect since the new rule is being appended at the end it will have no effect as there appears to be a "reject all" sort of rule before it. If this is the case, how to make sure the new rule is added in the right order? Otherwise, what am I missing? Please help.

    Read the article

  • Managing scalability and availability with two servers running Apache Httpd, Apache Mina and MySQL

    - by celalo
    Hello, I am not a developer and I don't much experience with scalable server architectures. But I am in need of a highly available and scalable system for one of my projects. There is going to be two servers I am going to use for the time being. Both with 4 core CPUs and 8 GB RAM with RAID structures running CentOS 5.4. I will also have feature called "Failover IP" which enables to direct an IP address to another server within short time. The applications which will be run on the servers: There is going to be a Java application based on Apache Mina server for handling TCP requests from some hundreds of network devices where the devices are going to send request as much as one request per minute. Handling those requests, includes parsing the requests and inserting a few rows to the Database. Parsing requests before inserting data to the DB does take neglectable time. There is going to be MySQL server, as I stated above. Also there is going to be a PHP web application running on Apache Httpd Server which uses the same DB with the Java application. What I wish to have is to make use of those two servers at the most. I was imagining to have the servers identical, sharing the work load. MySQL could be a cluster maybe? And if some application fails or the whole machine goes down, the other will continue serving the requests seamlessly. Reminding that a "Failover IP" feature will be available for me to take advantage of. Also, It should be kept in mind that number of servers could increase in time, to meet the demand. What can you suggest? Which kind of tools I can make use of? Which kind of monitoring software (paid/unpaid) I have? Thanks in advance.

    Read the article

  • "Could not claim interface on camera: -6" when trying to connect usb camera (Kinect)

    - by rzetterberg
    I have installed the freenect library from openkinect.org. With that library there is a demo application which you can run from the terminal to test out the Kinect. However when I run this command I get the following output: richard@behemoth:~$ sudo freenect-glview Kinect camera test Number of devices found: 1 Could not claim interface on camera: -6 Could not open device This particular error is thrown by the library libusb by the function libusb_claim_interface and the error -6 corresponds to the LIBUSB_ERROR_BUSY. So my guess is that it has something to do with mounting the usb, rather than specifically the freenect library or the Kinect itself. So my question is how can I find out what resource is using this interface and how can I free it so that I can access it? Edit: What I have tried so far (just to be sure): Rebooted Plugged-out, plugged-in Tried different usb ports Restarted udev Additional information that might be useful: /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=1c73f217-ac8d-451b-8390-7a680628a856 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=bb49bd29-07ec-45a0-bbab-46fb8362b06b none swap sw 0 0 sudo uname -r: Linux behemoth 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10"

    Read the article

  • How do I use a Zyxel P660 router as just modem so that I can connect a WRT54GL router in cascade?

    - by Kenji Kina
    I have a Zyxel P660HW-t1 v2 router (which has a DSL port) and a WRT54GL router (which does not) and the exact same situation as in this thread (UPDATE: the connection between both devices is the important part, since I have been able to set the zyxel router to act as bridge by itself quite nicely. I have accessed my internet connection directly through a PC using PPPoE without any problems, the issues arise when I try to connect the WRT54GL router between the zyxel "modem" and my PCs). I've been trying to use my Zyxel P660 as a modem only: Setup P660 to bridge mode. Changed WRT54GL's IP address to 192.168.2.1 to avoid a conflict on the network. Configured the PPPoE settings as required on WRT54GL. The thing is that when I connect the Zyxel modem/router on the WRT54GL's internet port the light doesn't turn on. I can confirm that this port has been working ok, so I'm not really sure what's going between the devices. I checked several settings such as IPs, tried disabling DHCP on Zyxel/Linksys, Firewall on both and still nothing. Also, I tried connecting Zyxel directly to a computer in bridge mode and dialed successfully. I have even posted a question here before, thinking that what I asked there was the only thing I needed to get things done. Unfortunately it wasn't, and the guy that solved his issue didn't give enough details in his post (and is quite unlikely to give more details since he was an anonymous user). For one, I don't know how to do this part: connected to the Zyxel through telnet and forced LAN port 1 to be at 100mb as well I can't find the option that does this on the zyxel router. Not through telnet or the web admin. Can anyone help me solve this?

    Read the article

  • Static routing on a TP-Link TL-WR1043ND

    - by igor
    My home network setup looks like this: Both routers are TP-Link TL-WR1043ND routers. The basement router handles all devices in the house that are connected via cable, handing out addresses for the 10.89.49.0/24 network via DHCP. Wireless doesn’t really work from the basement, as the signal is too weak, so I have disabled it. To do WiFi, I have added a second (identical) router downstairs. On the WAN side it is assigned the 10.89.49.101 IP address from the basement router, and on its LAN it provides the 10.89.7.0/24 network. Basic internet access works flawlessly from any device this way. I am now facing the problem that I am not able to communicate (e.g. SSH) between all devices, wired or wireless. I am able to connect from a wireless device to a wired device, for example SSH-ing from 10.89.7.X to 10.89.49.Y, but it doesn’t work the other way round—despite the fact that I have added a static route to the basement router: Does anybody have any idea on how to solve it? Both routers have already been upgraded to use the most recent firmware from TP-Link.com (Build 110429), to no avail. Errata: I would like to stick with the official firmware, switching to something like DD-WRT or OpenWrt only as a last resort.

    Read the article

  • Sonicwall routing between multiple subnets on multiple interfaces

    - by Rain
    As shown by the network diagram below, I have two completely separate networks. One is being managed by a Sonicwall NSA 220, the other by some other router (the brand is not important). My goal is to allow devices within the 192.168.2.0/24 network to access devices in the 192.168.3.0/24 network. Allowing the reverse (192.168.3.0/24 - 192.168.2.0/24) is not required. So far, I have done the following: I connected the X3 Interface on the Sonicwall to the 192.168.3.0/24 network switch (shown as the dashed red line in the diagram). Next, I gave it a static ip address of 192.168.3.254 and set the Zone to LAN (the same Zone for the X0 interface). Judging by various articles and KBs I've read, this is all that should be necessary, although it does not work. I can ping 192.168.3.254 from any device in the 192.168.2.0/24 network although I cannot ping/connect to any device within the 192.168.3.0/24 network. Any help would be greatly appreciated! Network Diagram: (I asked a similar, yet more complicated, question earlier; although, I realized that I cannot solve that without first solving this (which may actually solve my original question))

    Read the article

  • How to get Passive FTP Working Through an Iptables Firewall?

    - by user1133248
    I have an iptables firewall running on a Fedora Linux server that is basically being used as a firewall router and OpenVPN server. That's it. We have been using the same iptables firewall code for YEARS. I did make some changes on 21 December to re-route a mySQL port, but given what has happened I've completely backed those changes out. Sometime after those changes were made and backed out passive FTP, served from a vsftpd process, stopped working. We use a passive ftp client to FLING (that's the name of the ftp client running under Windows! :-) ) images from our remote telescopes to our server. I believe it is something in the firewall code because I can drop the firewall and the FTP file transfer (and connecting to the ftp site with Internet Explorer to see the file list) works. When I raise the iptables firewall, it stops working. Again, this is code that we'd been using for years. However, I felt that maybe there was something I missed, so we had a .bak file from 2009 that I used. Same behavior, passive ftp does not work. So, I went and rebuilt the firewall code line by line to see what line was causing the problem. Everything worked until I put the line -A FORWARD -j DROP in very near the end. Of course, if I am correct, this is the line that basically "turns on" the firewall, saying drop everything except for the exceptions I've made above. However, this line has been in the iptables code probably since 2003. So, I'm at the end of my rope, and I still can't figure out why this has stopped working. I guess I need an expert on iptables configuration. Here is the iptables code (from iptables-save) with comments. # Generated by iptables-save v1.3.8 on Thu Jan 5 18:36:25 2012 *nat # One of the things that I remain ignorant about is what these following three lines # do in both the nat tables (which we're not using on this machine) and the following # filter table. I don't know what the numbers are, but I'm ASSUMING they're port # ranges. # :PREROUTING ACCEPT [7435:551429] :POSTROUTING ACCEPT [6097:354458] :OUTPUT ACCEPT [5:451] COMMIT # Completed on Thu Jan 5 18:36:25 2012 # Generated by iptables-save v1.3.8 on Thu Jan 5 18:36:25 2012 *filter :INPUT ACCEPT [10423:1046501] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [15184:16948770] # The following line is for my OpenVPN configuration. -A INPUT -i tun+ -j ACCEPT # In researching this on the Internet I found some iptables code that was supposed to # open the needed ports up. I never needed this before this week, but since passive FTP # was no longer working, I decided to put the code in. The next three lines are part of # that code. -A INPUT -p tcp -m tcp --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --sport 1024:65535 --dport 20 -m state --state ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --sport 1024:65535 --dport 1024:65535 -m state --state RELATED,ESTABLISHED -j ACCEPT # Another line for the OpenVPN configuration. I don't know why the iptables-save mixed # the lines up. -A FORWARD -i tun+ -j ACCEPT # Various forwards for all our services -A FORWARD -s 65.118.148.197 -p tcp -m tcp --dport 3307 -j ACCEPT -A FORWARD -d 65.118.148.197 -p tcp -m tcp --dport 3307 -j ACCEPT -A FORWARD -s 65.118.148.197 -p tcp -m tcp --dport 3306 -j ACCEPT -A FORWARD -d 65.118.148.197 -p tcp -m tcp --dport 3306 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 21 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 21 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 20 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 20 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 7191 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 7191 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 46000:46999 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 46000:46999 -j ACCEPT -A FORWARD -s 65.118.148.0/255.255.255.0 -j ACCEPT -A FORWARD -d 65.118.148.196 -p udp -m udp --dport 53 -j ACCEPT -A FORWARD -s 65.118.148.196 -p udp -m udp --dport 53 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 53 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 53 -j ACCEPT -A FORWARD -d 65.118.148.196 -p udp -m udp --dport 25 -j ACCEPT -A FORWARD -s 65.118.148.196 -p udp -m udp --dport 25 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 42 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 42 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 25 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 25 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -d 65.118.148.204 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -s 65.118.148.204 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 6667 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 6667 -j ACCEPT -A FORWARD -s 65.96.214.242 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -s 192.68.148.66 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT # "The line" that causes passive ftp to stop working. Insofar as I can tell, everything # else seems to work - ssh, telnet, mysql, httpd. -A FORWARD -j DROP -A FORWARD -p icmp -j ACCEPT # The following code is again part of my attempt to put in code that would cause passive # ftp to work. I don't know why iptables-save scattered it about like this. -A OUTPUT -p tcp -m tcp --sport 21 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -p tcp -m tcp --sport 20 --dport 1024:65535 -m state --state RELATED,ESTABLISHED -j ACCEPT -A OUTPUT -p tcp -m tcp --sport 1024:65535 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT COMMIT # Completed on Thu Jan 5 18:36:25 2012 So, with all that prelude, my basic question is: How can I get passive ftp to work behind an iptables firewall? As you can see, I've tried to get it working (again) and tried to do some research on the issue, but have come up...short. Any answers would be appreciated by both me and various variable star astronomers around the world! THANKS! -Richard "Doc" Kinne, American Assoc. of Variable Star Observers, [email protected]

    Read the article

  • Multiple contacts with shared information

    - by Keith Thompson
    Background: I currently have several hundred contacts, synchronized between a Microsoft Exchange server and several mobile devices. I also save exported copies of the contacts in .vcf format. Is there a good way (application, file format, whatever) to maintain contacts with shared information? A very common scenario is that I have contacts for two or more people who live in the same house, for example: John Doe 123 Main Street, Anytown USA Home: 555-555-1111 Work: 555-555-2222 Mobile: 555-555-3333 E-mail: [email protected] Jane Doe 123 Main Street, Anytown USA Home: 555-555-1111 Work: 555-555-4444 Mobile: 555-555-5555 E-mail: [email protected] As you can see, both contacts have the same home address and phone number, but distinct names and work and mobile phone numbers. (Other information might also be either shared or distinct.) The applications and file formats I'm familiar with don't seem to have a good way to deal with this. If I use a single "John & Jane Doe" contact for both, it's difficult to distinguish the distinct information (if I want to call Jane's mobile phone rather than John's). If I use a separate contact for each, I have to remember to update both of them (or all of them for N 2) when they move or change their home phone number. An ideal solution would let me create a record containing information for their household, and have each of their contact records contain a reference to the household record, so that when I view John's contact record I see both shared and distinct information. Is there anything out there that has good support this kind of thing? (I would think there would be, since it's a very common scenario.) (I suppose I could roll my own system that generates merged .vcf files from some extended format, but that wouldn't play well with synchronizing across multiple devices.)

    Read the article

  • How to get the permissions right for /dev/raw1394

    - by Mark0978
    I recently upgraded one of my ubuntu machines to Karmic and I'm having trouble getting the permissions of /dev/raw1394 set to 0666. They only thing this machine is used for is recording audio from a firepod which uses /dev/raw1394 via jackd and there are no other FireWire devices connected, so security around this device is not really an issue. If I run as root, everything works as expected, but I have some folks that run the recorder that I don't want to have root access. However, I can't figure out which lines setup the perms I've tied this: /etc/udev/permissions.d/raw1394.rules:raw1394:root:root:0666 And I have this setup (default install) /lib/udev/rules.d/75-persistent-net-generator.rules:SUBSYSTEMS=="ieee1394", ENV{COMMENT}="Firewire device $attr{host_id})" /lib/udev/rules.d/75-cd-aliases-generator.rules:# the "path" of usb/ieee1394 devices changes frequently, use "id" /lib/udev/rules.d/75-cd-aliases-generator.rules:ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb|ieee1394", ENV{ID_CDROM}=="?*", ENV{GENERATED}!="?*", \ /lib/udev/rules.d/60-persistent-storage-tape.rules:KERNEL=="st*[0-9]|nst*[0-9]", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394" /lib/udev/rules.d/50-udev-default.rules:# FireWire (deprecated dv1394 and video1394 drivers) /lib/udev/rules.d/50-udev-default.rules:KERNEL=="dv1394-[0-9]*", NAME="dv1394/%n", GROUP="video" /lib/udev/rules.d/50-udev-default.rules:KERNEL=="video1394-[0-9]*", NAME="video1394/%n", GROUP="video" /lib/udev/rules.d/60-persistent-storage.rules:KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}" /lib/udev/rules.d/60-persistent-storage.rules:KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n" And I find these lines in /var/log/syslog Apr 30 09:11:30 record kernel: [ 3.284010] ieee1394: Node added: ID:BUS[0-00:1023] GUID[000a9200c7062266] Apr 30 09:11:30 record kernel: [ 3.284195] ieee1394: Host added: ID:BUS[0-01:1023] GUID[00d0035600a97b9f] Apr 30 09:11:30 record kernel: [ 18.372791] ieee1394: raw1394: /dev/raw1394 device initialized What I can't figure out, is which line actually creates that raw1394 device in the first place. How do you get /dev/raw1394 to have permissions 0666?

    Read the article

  • USB Wifi will not connect on Windows 7 (Even though the driver installs OK)

    - by Pete Roberts
    Windows 7 will not connect to a WiFi Netowrk using a USB Network Adapter. I have 3 adapters, A Senoa SUB 364 (EXT), a Repeatit SU2410 USB V2 and a ZYXEL G202. All of these devices install OK on Windows 7 Home Premium on my Destop PC (64 bit) and on my Asus Wii Netbook (32 bit). In each case the adapter can be enabled/disabled and the driver properties says it is working correctly. When I try and connect to a network Windows 7 behaves as though the adapter does not exist and reports no networks. The Wii has an integrated adapter which works perfectly under Windows and connects to either of the 3 networks available to me. I have done all the checks I can on the configuration. What seems odd to me is that it happens to all 3 devices on 2 different windows 7 PCs both of which are working perfectly in any other respect. This suggests the common denominator is me and I must be doing something wrong.. what's also strange is that I cannot find any similar problems being reported on any of the forums. From what reading I've been able to do it seems like the new wifi virtualisation thingy in W7 is not recognising the adapters which suggests I', missing a configuration option somewhere. Looking forward to finding out if I'm not alone or just being stupid. Pete

    Read the article

  • Leopard Network Shares and browsing are unreliable

    - by EvilChookie
    I have two macs, running Leopard 10.5.8. One is the 13" MBP connected via WiFi, and the other is a 24" 2008 iMac, connected via ethernet. There are at least another 6-10 machines (windows and mac) awake on the network (with shares) at any given time, yet there are plenty of times where I cannot see any devices/shares in either my "Shared" section in Finder, nor can I see any computers in "Network" in Finder. Restarting doesn't help. I've restarted all the networking gear in the house to no avail. Our network is a series of gigabit switches connected to a D-Link gaming router. I believe we use OpenDNS, and our provider is Cox. I hate having to use "Go - Connect to Server" to browse to commonly used file shares (by IP). I'd like to know why my shares do not always and consistently appear in Leopard. Edit: I ran OnyX this morning, and performed the cleaning and maintenance operations (including disk permissions) on both my Macs, and at least one of my macs has started showing network devices again. (the other is still going). No idea how long this will last. Any ideas as to what is causing this issue, and how to prevent it? Edit 2: Aaaand there the shares go again. So running OnyX is not a permanent or reliable fix for this issue. Edit 3: After a clean reinstall and update, network shares are still unreliable. The SMBClient command mentioned in comments shows me the information it's supposed to show, but the shares do not appear in the shared section. They'll also vanish at random and reappear at random throughout the day.

    Read the article

  • DIY NAS - links for Instructions

    - by Kaushik Gopal
    Good folk of SU, I'm planning to build a NAS (Network Access Storage). I'm planning to do it cheap (:read Old PC Config + Open source software). I was looking for good DIY links . Before you shoot this down as a Repost, I'm only looking for good links containing detailed instructions for setting up a NAS. I did a fair bit of searching and found these links (so please suggest others. While these links are great they delve more on the hardware side, i'm looking for more instructions in the software side). For the sake of the interwebs: Ubuntu: http://snarfquest.com/wiki/index.php/Setting_up_a_Home_NAS http://www.smallnetbuilder.com/content/view/27962/77/ http://jonpeck.blogspot.com/2006/11/how-to-configure-80-fileserver-in-45.html FreeNAS http://www.smallbusinesscomputing.com/webmaster/article.php/3719706 http://www.codeproject.com/KB/system/homemade_nas.aspxhttp://www.codeproject.com/KB/system/homemade_nas.aspx There was one at rubbervir.us that everyone points to, but apparently the site has gone down. A couple of other queries: Is Printer/Scanner sharing a possibility with NAS devices? Many talk of torrent support with NAS Devices, a little more light on this? Does this mean, an auto download of torrent through a feed into NAS, or just support for storing Torrent download files onto the NAS(don't see the difference between the latter and a normal file tranfer)

    Read the article

  • Unable to install PEM/pkcs12 created by gnutls to Cisco ASA

    - by ACiD GRiM
    I've been pulling some hair out trying to figure out why cisco devices don't like my certificates. My primary need is to get a trustpoint set up with CA,cert,key on the ASA for VPN systems, however I'm having the same issues on my IOS devices. I created a pkcs12 with openssl a few months ago that imported with no issues, but now that I'm getting ready to move this lab to production I'm using gnutls certtool as I found it adds alt_dns and ip_address fields properly to the certificate, (which cost me a few more hairs trying to get to work with openssl's ca tool) I'm including the current test certs below, don't worry I'm not using these in production ;) The maddening thing is that after I thought gnutls was generating certs incorrectly, I tried making a pkcs12 for a printserver and it imported with no issues. Here's my command flow for creating these certs: certtool --generate-privkey --disable-quick-random --outfile nn-ca.key certtool --generate-self-signed --load-privkey nn-ca.key --outfile nn-ca.crt certtool --generate-privkey --disable-quick-random --outfile nn-g0.key certtool --generate-certificate --load-privkey nn-g0.key --outfile nn-g0.crt --load-ca-privkey nn-ca.key --load-ca-certificate nn-ca.crt openssl pkcs12 -export -certfile nn-ca.crt -in nn-g0.crt -inkey nn-g0.key -out nn-g0.p12 openssl enc -base64 -in nn-g0.p12 -out nn-g0.base64.p12 The password for the attatched pkcs12 is "ciscohelp" without quotes. Thanks for any help TestCerts

    Read the article

  • iOS 6 in-app email does not send from within any app that supports it

    - by Joe Termine
    A strange problem -- Last night I upgraded to the final release of iOS 6 on my iPhone 4S and my iPad 2. When I open an app that allows you to send emails from within the app (e.g. adobe Reader, TurboScan, etc.) -- doesn't matter which one -- I am prompted with the email dialog from within the app, I can compose the message, but when I go to send one of two things will happen: either the email sending sound will "swoosh" and the dialog will close (leading me to think it worked) or some apps with good error handling will say there is an "error sending email." The error logs on my device are not reporting errors. It's just that the email doesn't really send. I have two Exchange mail boxes on these devices. One connects to a corporate network hosting on-premise exchange 2007 and the other connects to Gmail over the exchange interface. Have attempted to delete and re-pair these accounts (one at a time) without any change. I'm wondering if others are experiencing this problem, or whether I should just wipe the devices and chalk it up to (another) failed upgrade. Thoughts much appreciated. Joe

    Read the article

  • 4.00gb (3.25gb usable) in Windows 7 x64

    - by dotnetdev
    Hi, I have setup Windows 7 Ultimate x64 on my PC. I have 4gb RAM and my BIOS states the correct amount (4096mb), but I cannot Windows (System Manager) says I have 4.00gb (3.25gb usable). This seems to be a popular issue, and I have looked for an integrated video card (integrated with my chipset) to disable but haven't found anything. What else can be preventing me from seeing all 4gb? When I had Vista 32bit, it would say 3.25gb RAM not 4.00gb (3.25gb usable). I have an x64 CPU and when I brought my RAM, I used a compatibility tool from Crucial (the memory vendor) to test how much memory my PC can support and 4gb was the answer (this was a windows app I think). Chipset is Intel(R) G33/G31/P35/P31 Express Chipset PCI Express In the bios, I looked for an onboard video card (integrated) and there was no such thing, but a couple of other onboard devices. There are also no "Resource Mappings" settings. FURHTER DETAILS: Chipset North Bridge: Intel Bearlake G33 South Bridge: Intel 82801IR ICH9R Maximum Memory Amount 8 GB Graphics Controller Type Intel GMA 3100 (Enabled) I guess the first thing is, how do I disable the graphics controller? EDIT: This thread (http://forums.legitreviews.com/about23417.html) indicates the issue is with memory mapped devices, but someone on this thread says that does not apply to x64. The rest of the comments points to a mobo issue for the guy who started that thread. Thanks

    Read the article

  • How to use my computer as a Headset device for my phone with Bluetooth?

    - by TheJelly
    I want to extract the audio from my phone (the analog TV and FM/AM receiver mainly) and play it through my computer speakers. There is a headphone jack but it is of non-standard size (probably a micro-jack) and I do not have access to a shop that sells that kind of equipment in my area so doing this with Bluetooth is the only solution I can foresee. Both my laptop and my phone support A2DP but for some reason the service (from the phone) does not show up while I add a new connection and the phone does not let me initiate a connection with any other profile except FTP (although it detects other services in the service list like A2DP and works perfectly fine with other profiles like DUN, HID, OPP, SSP if the connection is started through the computer). I am currently using the latest version of the Toshiba stack, I have tried using WIDCOMM but it refuses to install drivers for both the internal Bluetooth (which is a Broadcom device) and the USB Bluetooth that I use on my desktop. The standard Microsoft stack (generic driver) does install but it does not work with both of my devices as they do not detect any Bluetooth devices when scanning. With BlueSoleil (the default stack that came with the USB Bluetooth) I could set my device as "headset" instead of only "laptop/desktop", and this allowed both my phones to detect my laptop as a device they can use as a headset, but the problem with this stack was that only the older phone could actually connect to my laptop and that the internal Bluetooth could not be used. Basically, I want to set the device type as a "headset" for my phone using the Toshiba stack like I did with BlueSoleil. Is there any way this could be done? Thanks. Image: Device type selection http://i.stack.imgur.com/drjC6.jpg

    Read the article

  • Are there any Microsoft Exchange Clients for iOS and Android that store their local data in an encrypted manner?

    - by Zac B
    I don't feel like this is a product recommendation question, more of a "does this tech even exist and is it feasible" question, but if I'm wrong, feel free to give this question the boot. Context: Our company has a bunch of traveling employees who access the company's Exchange server via thier iDevices or android phones, but because of the data protection laws in the state where our company is based (and the nature of the data our company works with), a recent security audit found that all mobile devices (laptops, phones, etc) operated by our company need to have all company correspondence and related data encrypted all the time. For laptops, that was easy: BitLocker or TrueCrypt, problem solved. For phones and tablets, however, I'm stumped. Sure, you can put lock screens/passwords on the phones, but the data is still accessible via external extraction, as law enforcement authorities already know. Question: Are there any clients for Microsoft Exchange that run on iOS or Android which store local data encrypted? The people using our mobile devices do a lot of their work while offline, so just giving them OWA access with SSL connection security isn't enough. Are there apps/technologies that present an additional login credential prompt to decrypt locally stored data in the app's storage area on the phone? My gut reaction when I started looking into this was "that doesn't sound like something Apple would allow into the App Store", but I've been wrong before...

    Read the article

  • CheckPoint/Amazon VPC VPN tunnel working inconsistently

    - by Lee
    First time poster, so please be gentle and correct me if there's Server Fault etiquette I'm missing. We have two CheckPoint edge devices at sites A & B, independently managed, connecting to two Amazon private clouds. In both cases, the two Amazon VPCs are in the same community on the CheckPoint device. A VPN tunnel exists between the two CheckPoint devices as well. Between Sites A & B and the Amazon VPC in Northern Virigina, we are unable to keep more than one tunnel up. Both will come up, but tunnel 2 will drop an hour after initiation and will not come back up while tunnel 1 is up. We believe the 1-hour period is due to IPsec phase 2 renegotiation, but can't be sure. On our side, we see the tunnel 2 remote endpoint as not responding to phase 2 negotiation. Between Sites A & B and the Amazon VPC in Oregon, we have no issues. Both tunnels are up and fail over properly. The CheckPoint gateways are using domain-based VPNs. According to CheckPoint's advice to Amazon, this won't work. Yet, in Oregon, it does. We've pursued this with Amazon and, despite the fact it's working in Oregon, they've refused to troubleshoot with us further. Can anyone suggest anything we can do to try to get this stabilized? Going to route-based VPNs is not an option for us.

    Read the article

  • What is the correct iptables rule when NATing multiple private subnets?

    - by Jose Mendez
    I have a Centos minimal 6.5 acting as a router. eth0 is connected to a Cisco switch trunk port, allowing VLANs 200-213. I have several VLAN interfaces just as this link suggests: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/s2-networkscripts-interfaces_802.1q-vlan-tagging.html And have IPv4 forwarding, so all my network devices from any of the networks 200-213 can communicate with each other using this linux box as their router. Problem is, I need them to access the Internet, so I added the following rule: iptables -t nat -A POSTROUTING -s 192.168.0.0/16 -j SNAT --to 1.1.1.56 1.1.1.56 is the "outside" address. This works fine, devices connected to the internal networks can ping Intertnet addresses BUT, they stop being able to talk to each other across subnets, so 192.168.211.55 can ping 8.8.8.8, but can't talk to 192.168.213.5. As soon as I do a service iptables restart to remove the rule, I can start talking across internal subnets again. What would be the correct way to set up NAT for multiple private subnets? Or maybe the correct way to set up forwarding?

    Read the article

  • Network Traffic Log

    - by Chris Becke
    Background - On my "home" network I have a Linksys WTR45GL router providing my internet access as well as a wireless AP. Connected I have * 2 Windows PCs (wired) * At least one laptop (Wired) * Some 802.11 enabled handheld consoles (PSPs) * A Nintendo Wii * Some windows XP pcs used by the people in the granny flat. Where I live, South Africa, well, 1Gb worth of monthly cap is, while not expensive, costly enough that I'd like to be sure that all the bandwidth used by devices on my network is ... well ... legitimate and not the result of neighbors parasiting my wireless, malware or just the result of "liberal" download policies in my software. I got the Linksys WRT45GL on the understanding that there were custom firmwares (DD-WRT and Tomato) that allowed bandwidth tracking, but there doesn't seem to be any facility to get a log of traffic that can be examined to see (a) which local devices were the biggest consumers of bandwidth and (b) what they were connected to. What tools are there for logging traffic such that, when it gets to that OMG moment in the month when all my bandwidth is gone, I have a chance to find out what the hell used it all up (and hopefully attempt some corrective action).

    Read the article

  • Advice needed for a home network setup (hardware & software) to handle many clients and potentially heavy traffic

    - by posdef
    I have recently decided to re-structure the home network of our flatshare here. Here's a quick outline of the situation. I envision to have the following 4 devices connected to the router via cable: Xbox 360 IP phone Printer QNAP server (Web, File and Multimedia) We are three people living here, so on top of that there will be to 5-6 computers/mobile devices connecting as wireless clients. My goal is to be able to transfer files (when needed) between the computer and the Multimedia server, which I can reach via 360 and play on the TV. I also would like to keep a high level of security; right now I have the encryption on WPA2 and MAC filtering. I don't believe the web server will get heavy traffic, though I would like to have it responsive. Likewise, I don't have a habit of downloading via torrent etc, but I greatly appreciate my network being responsive and fast, especially when I am browsing or streaming high quality media. Now my questions are: is this setup feasible? smart? efficient? can this be improved somehow? my current router (D-Link DI624) and the previous one (DI-524) used to have spontaneous drops in network, which I find highly irritating. I don't believe in my router, especially now that it completely crashed when I was test-running the setup by transferring a large media file to server while xbox was playing music from the server, and two computers browsing the net. Do I need to get new hardware, if so, any recommendations for a reliable and fast router?

    Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >