Search Results

Search found 13288 results on 532 pages for 'print expression'.

Page 272/532 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

• Ethernet Communication Error

  - by SivaKumar

  Hi, I wrote a program to query the status of the Ethernet printer for that i created a TCP Stream Socket and i send the query command to the printer.In case of Error less condition it returns No error status but in error case its getting hang at recv command.Even i used Non blocking now the recv command returns nothing and error set as Resource temporarily unavailable. code: #include <stdio.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <netdb.h> #include <string.h> #include <unistd.h> #include <arpa/inet.h> #include <errno.h> #include <stdlib.h> #include <fcntl.h> #include <sys/ioctl.h> #include <sys/socket.h> #include <signal.h> #include <termios.h> #include <poll.h> #include <netinet/tcp.h> #include <stdarg.h> int main() { int ConnectSocket,ConnectSocket1,select_err,err,nRet,nBytesRead; struct timeval waitTime = {10,30}; fd_set socket_set; unsigned char * dataBuf = NULL; unsigned char tempVar, tempVar1, tempVar2, tempVar3; char reset[] = "\033E 2\r"; char print[] = "\033A 1\r"; char buf[1024]={0}; ConnectSocket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); printf("The Socket ID is %d\n",ConnectSocket); if (ConnectSocket < 0) { perror("socket()"); return 0; } struct sockaddr_in clientService; clientService.sin_family = AF_INET; clientService.sin_addr.s_addr = inet_addr("192.168.0.129"); //Printer IP clientService.sin_port = htons( 9100); // Printer Port if ( connect( ConnectSocket, (struct sockaddr*) &clientService, sizeof(clientService) ) == -1) { perror("connect()"); close(ConnectSocket); return -1; } /* if((nRet = ioctl(ConnectSocket , FIONREAD, &nBytesRead) == -1)) { perror("ioctl()"); } perror("ioctl()"); */ FD_ZERO(&socket_set); FD_SET(ConnectSocket, &socket_set); do { errno=0; select_err = select(ConnectSocket+1, NULL, &socket_set, NULL, &waitTime); }while(errno==EINPROGRESS); if (-1 == select_err || 0 == select_err) { int optVal = 0; int optLen = sizeof(optVal); if(select_err == -1) { perror("select() write-side"); } else { //Timeout errno=0; err = getsockopt(ConnectSocket, SOL_SOCKET, SO_ERROR, (char*)&optVal, &optLen); printf("the return of the getsockopt is %d\n",err); printf("the opt val is %s\n",(char*)optVal); perror("getsockopt()"); if(err == -1) { perror("getsockopt() write-side"); } } printf("Select Failed during write - ConnectSocket: %d\n", ConnectSocket); //close(ConnectSocket); return -1; } err = send(ConnectSocket,print,sizeof(print)-1, 0); printf("\n No of Bytes Send is %d\n",err); if(err == -1 || err ==0) { perror("send()"); //close(ConnectSocket); return -1; } FD_ZERO(&socket_set); FD_SET(ConnectSocket, &socket_set); do { errno=0; select_err = select(ConnectSocket+1, NULL, &socket_set, NULL, &waitTime); }while(errno==EINPROGRESS); if (-1 == select_err || 0 == select_err) { printf("Select Failed during write - ConnectSocket: %d\n", ConnectSocket); return -1; } err = send(ConnectSocket,reset,sizeof(reset)-1, 0); printf("\n No of Bytes Send is %d\n",err); if(err == -1 || err ==0) { perror("send()"); //close(ConnectSocket); return -1; } FD_ZERO(&socket_set); FD_SET(ConnectSocket, &socket_set); printf("i am in reading \n"); select_err = select(ConnectSocket+1, &socket_set, NULL, NULL, &waitTime); printf("the retun of the read side select is %d \n",select_err); perror("select()"); if (-1 == select_err|| 0 == select_err) { printf("Read timeout; ConnectSocket: %d\n", ConnectSocket); close(ConnectSocket); perror("close()"); return -1; } printf("Before Recv\n"); nBytesRead = recv(ConnectSocket , buf, 1024, 0); printf("No of Bytes read is %d\n",nBytesRead); printf("%s\n",buf); if(nBytesRead == -1) { perror("recv()"); close(ConnectSocket); perror("clode()"); return -1; } close(ConnectSocket); return 1; }

  Read the article

• Java MVC - How to divide a done text game into MVC?

  - by Zopyrus

  Been sitting here for hours now trying to figure this out, so a bit sympathy for this large question. :) The Goal: I simply want to divide my done code into MVC (Model View Controller) parts. I have the game logics done and text based - the code works fine. The Problem: Well, I want to implement this code into MVC, but where do explain for the MODEL that it should use text-based? Because the VIEW is only for the layout (graphically) correct? I am having a REALLY hard time figuring out where to begin at all. Any pointers would be so nice! Here is my game logics code: import mind.*; import javax.swing.*; import java.util.*; import java.lang.*; import java.awt.*; public class Drive { String[] mellan; boolean gameEnd, checkempty, checkempty2, enemy, enemy2; String gr,rd,tom; int digits; public Drive() { // Gamepieces in textform gr="G"; rd="R"; tom=" "; mellan = new String[7]; String[] begin = {gr,gr,gr,tom,rd,rd,rd}; String[] end = {rd,rd,rd,tom,gr,gr,gr}; //input Scanner in = new Scanner(System.in); mellan=begin; gameEnd=false; while (gameEnd == false) { for(int i=0; i<mellan.length; i++) { System.out.print(mellan[i]); } System.out.print(" Choose 0-6: "); digits = in.nextInt(); move(); checkWin(); } } void move() { //BOOLEAN for gameruls!!! checkempty = digits<6 && mellan[digits+1]==tom; checkempty2 = digits>0 && mellan[digits-1]==tom; enemy = (mellan[digits]==gr && mellan[digits+1]==rd && mellan[digits+2]==tom); enemy2 = (mellan[digits]==rd && mellan[digits-1]==gr && mellan[digits-2]==tom); if(checkempty) { mellan[digits+1]=mellan[digits]; mellan[digits]=tom; } else if (checkempty2) { mellan[digits-1]=mellan[digits]; mellan[digits]=tom; } else if (enemy) { mellan[digits+2]=mellan[digits]; mellan[digits]=tom; } else if (enemy2) { mellan[digits-2]=mellan[digits]; mellan[digits]=tom; } } void checkWin() { String[] end = {rd,rd,rd,tom,gr,gr,gr}; for (int i=0; i<mellan.length; i++){ } if (Arrays.equals(mellan,end)) { for (int j=0; j<mellan.length; j++) { System.out.print(mellan[j]); } displayWin(); } } void displayWin() { gameEnd = true; System.out.println("\nNicely Done!"); return; } // Kör Drive! public static void main(String args[]) { new Drive(); } } Here is how I defined my DriveView thus far: (just trying to make one button to work) import mind.*; import javax.swing.*; import java.util.*; import java.lang.*; import java.awt.*; import java.awt.event.*; public class DriveView extends JFrame { JButton ruta1 = new JButton("Green"); JButton ruta2 = new JButton("Green"); JButton rutatom = new JButton(""); JButton ruta6 = new JButton("Red"); private DriveModel m_model; public DriveView(DriveModel model) { m_model = model; //Layout for View JPanel myPanel = new JPanel(); myPanel.setLayout(new FlowLayout()); myPanel.add(ruta1); myPanel.add(ruta2); myPanel.add(rutatom); myPanel.add(ruta6); this.setContentPane(myPanel); this.pack(); this.setTitle("Drive"); this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); } void addMouseListener(ActionListener mol) { ruta2.addActionListener(mol); } } And DriveController which gives me error at compile import mind.*; import java.awt.*; import java.awt.event.*; import javax.swing.*; import java.lang.*; public class DriveController { private DriveModel m_model; private DriveView m_view; public DriveController(DriveModel model, DriveView view) { m_model = model; m_view = view; view.addMouseListener(new MouseListener()); } class MouseListener implements ActionListener { public void actionPerformed(ActionEvent e) { String mening; mening = e.getActionCommand(); if (mening.equals("Green")) { setForeground(Color.red); } } } }

  Read the article

• What does Ruby have that Python doesn't, and vice versa?

  - by Lennart Regebro

  There is a lot of discussions of Python vs Ruby, and I all find them completely unhelpful, because they all turn around why feature X sucks in language Y, or that claim language Y doesn't have X, although in fact it does. I also know exactly why I prefer Python, but that's also subjective, and wouldn't help anybody choosing, as they might not have the same tastes in development as I do. It would therefore be interesting to list the differences, objectively. So no "Python's lambdas sucks". Instead explain what Ruby's lambdas can do that Python's can't. No subjectivity. Example code is good! Don't have several differences in one answer, please. And vote up the ones you know are correct, and down those you know are incorrect (or are subjective). Also, differences in syntax is not interesting. We know Python does with indentation what Ruby does with brackets and ends, and that @ is called self in Python. UPDATE: This is now a community wiki, so we can add the big differences here. Ruby has a class reference in the class body In Ruby you have a reference to the class (self) already in the class body. In Python you don't have a reference to the class until after the class construction is finished. An example: class Kaka puts self end self in this case is the class, and this code would print out "Kaka". There is no way to print out the class name or in other ways access the class from the class definition body in Python. All classes are mutable in Ruby This lets you develop extensions to core classes. Here's an example of a rails extension: class String def starts_with?(other) head = self[0, other.length] head == other end end Ruby has Perl-like scripting features Ruby has first class regexps, $-variables, the awk/perl line by line input loop and other features that make it more suited to writing small shell scripts that munge text files or act as glue code for other programs. Ruby has first class continuations Thanks to the callcc statement. In Python you can create continuations by various techniques, but there is no support built in to the language. Ruby has blocks With the "do" statement you can create a multi-line anonymous function in Ruby, which will be passed in as an argument into the method in front of do, and called from there. In Python you would instead do this either by passing a method or with generators. Ruby: amethod { |here| many=lines+of+code goes(here) } Python: def function(here): many=lines+of+code goes(here) amethod(function) Interestingly, the convenience statement in Ruby for calling a block is called "yield", which in Python will create a generator. Ruby: def themethod yield 5 end themethod do |foo| puts foo end Python: def themethod(): yield 5 for foo in themethod: print foo Although the principles are different, the result is strikingly similar. Python has built-in generators (which are used like Ruby blocks, as noted above) Python has support for generators in the language. In Ruby you could use the generator module that uses continuations to create a generator from a block. Or, you could just use a block/proc/lambda! Moreover, in Ruby 1.9 Fibers are, and can be used as, generators. docs.python.org has this generator example: def reverse(data): for index in range(len(data)-1, -1, -1): yield data[index] Contrast this with the above block examples. Python has flexible name space handling In Ruby, when you import a file with require, all the things defined in that file will end up in your global namespace. This causes namespace pollution. The solution to that is Rubys modules. But if you create a namespace with a module, then you have to use that namespace to access the contained classes. In Python, the file is a module, and you can import its contained names with from themodule import *, thereby polluting the namespace if you want. But you can also import just selected names with from themodule import aname, another or you can simply import themodule and then access the names with themodule.aname. If you want more levels in your namespace you can have packages, which are directories with modules and an __init__.py file. Python has docstrings Docstrings are strings that are attached to modules, functions and methods and can be introspected at runtime. This helps for creating such things as the help command and automatic documentation. def frobnicate(bar): """frobnicate takes a bar and frobnicates it >>> bar = Bar() >>> bar.is_frobnicated() False >>> frobnicate(bar) >>> bar.is_frobnicated() True """ Python has more libraries Python has a vast amount of available modules and bindings for libraries. Python has multiple inheritance Ruby does not ("on purpose" -- see Ruby's website, see here how it's done in Ruby). It does reuse the module concept as a sort of abstract classes. Python has list/dict comprehensions Python: res = [x*x for x in range(1, 10)] Ruby: res = (0..9).map { |x| x * x } Python: >>> (x*x for x in range(10)) <generator object <genexpr> at 0xb7c1ccd4> >>> list(_) [0, 1, 4, 9, 16, 25, 36, 49, 64, 81] Ruby: p = proc { |x| x * x } (0..9).map(&p) Python: >>> {x:str(y*y) for x,y in {1:2, 3:4}.items()} {1: '4', 3: '16'} Ruby: >> Hash[{1=>2, 3=>4}.map{|x,y| [x,(y*y).to_s]}] => {1=>"4", 3=>"16"} Python has decorators Things similar to decorators can be created in Ruby, and it can also be argued that they aren't as necessary as in Python.

  Read the article

• String Vector program exits before input

  - by kylepayne

  So, I have a project that must add, delete, and print the contents of a vector... the problem is that, when run the program exits before I can type in the string to add to the vector. I commented the function that that portion is in. Thanks! #include <iostream> #include <cstdlib> #include <vector> #include <string> using namespace std; void menu(); void addvector(vector<string>& vec); void subvector(vector<string>& vec); void vectorsize(const vector<string>& vec); void printvec(const vector<string>& vec); void printvec_bw(const vector<string>& vec); int main() { vector<string> svector; menu(); return 0; } //functions definitions void menu() { vector<string> svector; int choice = 0; cout << "Thanks for using this program! \n" << "Enter 1 to add a string to the vector \n" << "Enter 2 to remove the last string from the vector \n" << "Enter 3 to print the vector size \n" << "Enter 4 to print the contents of the vector \n" << "Enter 5 ----------------------------------- backwards \n" << "Enter 6 to end the program \n"; cin >> choice; switch(choice) { case 1: addvector(svector); break; case 2: subvector(svector); break; case 3: vectorsize(svector); break; case 4: printvec(svector); break; case 5: printvec_bw(svector); break; case 6: exit(1); default: cout << "not a valid choice \n"; // menu is structured so that all other functions are called from it. } } void addvector(vector<string>& vec) { string line; int i = 0; cout << "Enter the string please \n"; getline(cin, line); // doesn't prompt for input! vec.push_back(line); } void subvector(vector<string>& vec) { vec.pop_back(); return; } void vectorsize(const vector<string>& vec) { if (vec.empty()) { cout << "vector is empty"; } else { cout << vec.size() << endl; } return; } void printvec(const vector<string>& vec) { for(int i = 0; i < vec.size(); i++) { cout << vec[i] << endl; } return; } void printvec_bw(const vector<string>& vec) { for(int i = vec.size(); i > 0; i--) { cout << vec[i] << endl; } return; }

  Read the article

• PHP Include and accents (They show up as ?)

  - by user146780

  I'm using PHP include to include a PHP file that has HTML in it. some of the content has french accents and these show up as ? on the site. How can this be solved? Thanks Here is the PHP file I include: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html dir="ltr" xmlns="http://www.w3.org/1999/xhtml"> <head> <meta content="en-us" http-equiv="Content-Language" /> <title>Accueil</title> <meta content="text/html; charset=utf-8" http-equiv="Content-Type" /> <meta content="Changement créativité rêve buts être centré Plénitude personnel Développement transformation Modification nouveauté avancement bien-être Nouvelle vision ressentis L’énergie positive satisfaction l’acceptation Pardon" name="keywords" /> <link href="masterstyles.css" rel="stylesheet" type="text/css" /> <link href="menustyles.css" rel="stylesheet" type="text/css" /> <link href="menudropdown.css" rel="stylesheet" type="text/css" /> <td class="tbsyles" >&nbsp; <h3 class="bigorange"> ACTIVITÉS À VENIR…</h3> <p class="horizblue"> </p> <p class="bigblack"> <br /> Inscrivez-vous à nos conférences et formations <br /> <br /> </p> <h4 class="orange"> Example of some text that could be here<br /> </h4> <p class="horizblue"> &nbsp;</p> <h3 class="bigorange"> <br /> ABONNEZ-VOUS… </h3> <p class="nopadding"> À notre liste d’envoi </p> <form method="post" action="<?php echo $PHP_SELF;?>"> <?PHP function process_info(){ if(isset($_POST['email'])) { $email=$_POST["email"]; $email=strtolower($email); $action = "subc"; // check if email exists // check whether email is correct (basic checking) $test1=strpos($email, "@"); //value must be >1 $test2=strpos(substr($email,strpos($email,"@")), "."); //value must be >1 $test3=strlen($email); //value must be >6 $test4=substr_count ($email,"@"); //value must be 1 if ($test1<2 or $test2<2 or $test3<7 or $test4!=1) { print "<h6>Il a une erreur avec vôtre email</h6>"; print "<h6>Aucune informations ont été envoyer</h6>"; } else { print "<h5>vôtre address est enregistrer, Merci </h5>"; //If they wanted to subsribe, do it... $file = "emaillist-666XXX.txt"; // lets try to get the content of the file if (file_exists($file)){ // If the file is already in the server, its content is pasted to variable $file_content $file_content=file_get_contents($file); } else{ // If the file does not exists, lets try to create it // In case file can not be created (probably due to problems with directory permissions), // the users is informed (the first user will be the webmaster, who must solve the problem). $cf = fopen($file, "w") or die(""); fclose($cf); } // IF REQUEST HAS BEEN TO SUBSCRIBE FROM MAILING LIST, ADD EMAIL TO THE FILE if ($action=="subc"){ // check whether the email is already registered if(strpos($file_content,"<$email>")>0){die("");} // write the email to the list (append it to the file) $cf = fopen($file, "a"); fputs($cf, "\n$email"); // new email is written to the file in a new line fclose($cf); } } } } process_info(); ?> &nbsp;<p class="nopadding">Votre Courriel</p> <input name="email" type="text" class="style3" /> <input name="Submit" type="submit" value="OK" /></form> <p class="horizblue"></p> <h3 class="bigorange"> <br /> OUTILS GRATUIT… </h3> <p class="nopadding">Amusez-vous avec des outils intéressants</p> </td>

  Read the article

• how to extract data from excel (apache poi) to put it in mysql table using jsp? [ SOLVED]

  - by Nihad KH

  I want to extract data from excel sheet to insert it into a mysql table using jsp, so far i've done this and its printing data into the outpout(using apache poi),what should i add to this code ? Output : Name Age Adress Mark 35 New york,AA Elise 22 India,bb Charlotte 45 France,cc Readexcel.jsp : <%@page import="java.sql.Statement"%> <%@page import="java.util.ArrayList"%> <%@page import="java.sql.PreparedStatement"%> <%@page import="java.sql.Connection"%> <%@page import="java.util.Date"%> <%@page import="org.apache.poi.ss.usermodel.Cell"%> <%@page import="org.apache.poi.ss.usermodel.Row"%> <%@page import="org.apache.poi.xssf.usermodel.XSSFSheet"%> <%@page import="org.apache.poi.xssf.usermodel.XSSFWorkbook"%> <%@page import="java.io.File"%> <%@page import="org.apache.commons.io.FilenameUtils"%> <%@page import="org.apache.commons.fileupload.FileItem"%> <%@page import="java.util.Iterator"%> <%@page import="java.util.List"%> <%@page import="org.apache.commons.fileupload.servlet.ServletFileUpload"%> <%@page import="org.apache.commons.fileupload.disk.DiskFileItemFactory"%> <%@page import="org.apache.commons.fileupload.FileItemFactory"%> <%@page contentType="text/html" pageEncoding="UTF-8"%> <!DOCTYPE html> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> <title>PRINT DATA FROM EXCEL FILE</title> </head> <body> <% try{ boolean ismultipart=ServletFileUpload.isMultipartContent(request); if(!ismultipart){ }else{ FileItemFactory factory = new DiskFileItemFactory(); ServletFileUpload upload = new ServletFileUpload(factory); List items = null; try{ items = upload.parseRequest(request); }catch(Exception e){ } Iterator itr = items.iterator(); while(itr.hasNext()){ FileItem item = (FileItem)itr.next(); if(item.isFormField()){ }else{ String itemname = item.getName(); if((itemname==null || itemname.equals(""))){ continue; } String filename = FilenameUtils.getName(itemname); File f = checkExist(filename); item.write(f); try{ XSSFWorkbook workbook = new XSSFWorkbook(item.getInputStream()); XSSFSheet sheet = workbook.getSheetAt(0); Iterator<Row> rowIterator = sheet.iterator(); while (rowIterator.hasNext()){ Row row = rowIterator.next(); Iterator<Cell> cellIterator = row.cellIterator(); while (cellIterator.hasNext()) { Cell cell = cellIterator.next(); switch (cell.getCellType()){ case Cell.CELL_TYPE_NUMERIC: out.print(cell.getNumericCellValue() + "t"); break; case Cell.CELL_TYPE_STRING: out.print(cell.getStringCellValue() + "t"); break;} } out.println(""); } }catch (Exception e){ e.printStackTrace(); } } } } }catch(Exception e){ } finally { out.close(); } %> <%! private File checkExist(String fileName){ String saveFile = "D:/upload/"; File f = new File(saveFile+"/"+fileName); if(f.exists()){ StringBuffer sb = new StringBuffer(fileName); sb.insert(sb.lastIndexOf("."),"-"+new Date().getTime()); f = new File(saveFile+"/"+sb.toString()); } return f; } %> </body> </html> I've created a table in my database named EXCELDATA with the header of the excel sheet : ExcelData (Name varchar(50),age int,adress varchar(50)); what should i add to this code to get the data from the excel sheet to the mysql table ??

  Read the article

• Why does decorating a class break the descriptor protocol, thus preventing staticmethod objects from behaving as expected?

  - by Robru

  I need a little bit of help understanding the subtleties of the descriptor protocol in Python, as it relates specifically to the behavior of staticmethod objects. I'll start with a trivial example, and then iteratively expand it, examining it's behavior at each step: class Stub: @staticmethod def do_things(): """Call this like Stub.do_things(), with no arguments or instance.""" print "Doing things!" At this point, this behaves as expected, but what's going on here is a bit subtle: When you call Stub.do_things(), you are not invoking do_things directly. Instead, Stub.do_things refers to a staticmethod instance, which has wrapped the function we want up inside it's own descriptor protocol such that you are actually invoking staticmethod.__get__, which first returns the function that we want, and then gets called afterwards. >>> Stub <class __main__.Stub at 0x...> >>> Stub.do_things <function do_things at 0x...> >>> Stub.__dict__['do_things'] <staticmethod object at 0x...> >>> Stub.do_things() Doing things! So far so good. Next, I need to wrap the class in a decorator that will be used to customize class instantiation -- the decorator will determine whether to allow new instantiations or provide cached instances: def deco(cls): def factory(*args, **kwargs): # pretend there is some logic here determining # whether to make a new instance or not return cls(*args, **kwargs) return factory @deco class Stub: @staticmethod def do_things(): """Call this like Stub.do_things(), with no arguments or instance.""" print "Doing things!" Now, naturally this part as-is would be expected to break staticmethods, because the class is now hidden behind it's decorator, ie, Stub not a class at all, but an instance of factory that is able to produce instances of Stub when you call it. Indeed: >>> Stub <function factory at 0x...> >>> Stub.do_things Traceback (most recent call last): File "<stdin>", line 1, in <module> AttributeError: 'function' object has no attribute 'do_things' >>> Stub() <__main__.Stub instance at 0x...> >>> Stub().do_things <function do_things at 0x...> >>> Stub().do_things() Doing things! So far I understand what's happening here. My goal is to restore the ability for staticmethods to function as you would expect them to, even though the class is wrapped. As luck would have it, the Python stdlib includes something called functools, which provides some tools just for this purpose, ie, making functions behave more like other functions that they wrap. So I change my decorator to look like this: def deco(cls): @functools.wraps(cls) def factory(*args, **kwargs): # pretend there is some logic here determining # whether to make a new instance or not return cls(*args, **kwargs) return factory Now, things start to get interesting: >>> Stub <function Stub at 0x...> >>> Stub.do_things <staticmethod object at 0x...> >>> Stub.do_things() Traceback (most recent call last): File "<stdin>", line 1, in <module> TypeError: 'staticmethod' object is not callable >>> Stub() <__main__.Stub instance at 0x...> >>> Stub().do_things <function do_things at 0x...> >>> Stub().do_things() Doing things! Wait.... what? functools copies the staticmethod over to the wrapping function, but it's not callable? Why not? What did I miss here? I was playing around with this for a bit and I actually came up with my own reimplementation of staticmethod that allows it to function in this situation, but I don't really understand why it was necessary or if this is even the best solution to this problem. Here's the complete example: class staticmethod(object): """Make @staticmethods play nice with decorated classes.""" def __init__(self, func): self.func = func def __call__(self, *args, **kwargs): """Provide the expected behavior inside decorated classes.""" return self.func(*args, **kwargs) def __get__(self, obj, objtype=None): """Re-implement the standard behavior for undecorated classes.""" return self.func def deco(cls): @functools.wraps(cls) def factory(*args, **kwargs): # pretend there is some logic here determining # whether to make a new instance or not return cls(*args, **kwargs) return factory @deco class Stub: @staticmethod def do_things(): """Call this like Stub.do_things(), with no arguments or instance.""" print "Doing things!" Indeed it works exactly as expected: >>> Stub <function Stub at 0x...> >>> Stub.do_things <__main__.staticmethod object at 0x...> >>> Stub.do_things() Doing things! >>> Stub() <__main__.Stub instance at 0x...> >>> Stub().do_things <function do_things at 0x...> >>> Stub().do_things() Doing things! What approach would you take to make a staticmethod behave as expected inside a decorated class? Is this the best way? Why doesn't the builtin staticmethod implement __call__ on it's own in order for this to just work without any fuss? Thanks.

  Read the article

• Min-Ordered Bionomial Heap Insertion java

  - by Charodd Richardson

  Im writing a java code to make a min-ordered Binomial Heap and I have to Insert and Remove-min. I'm having a very big problem inserting into the Heap. I have been stuck on this for a couple of days now and it is due tomorrow. Whenever I go to insert, It only prints out the item I insert instead of the whole tree (which is in preorder). Such as if I insert 1 it prints (1) and then I go to insert 2 it prints out (2) instead of (1(2)) It keeps printing out only the number I insert last instead of the whole preordered tree. I would be very grateful if someone could help me with this problem. Thank you so much in advance, Here is my code. public class BHeap { int key; int degree;//The degree(Number of children) BHeap parent, leftmostChild, rightmostChild, rightSibling,root,previous,next; public BHeap(){ key =0; degree=0; parent =null; leftmostChild=null; rightmostChild=null; rightSibling=null; root=null; previous=null; next=null; } public BHeap merge(BHeap x, BHeap y){ BHeap newHeap = new BHeap(); y.rightSibling=x.root; BHeap currentHeap = y; BHeap nextHeap = y.rightSibling; while(currentHeap.rightSibling !=null){ if(currentHeap.degree==nextHeap.degree){ if(currentHeap.key<nextHeap.key){ if(currentHeap.degree ==0){ currentHeap.leftmostChild=nextHeap; currentHeap.rightmostChild=nextHeap; currentHeap.rightSibling=nextHeap.rightSibling; nextHeap.rightSibling=null; nextHeap.parent=currentHeap; currentHeap.degree++; } else{ newHeap = currentHeap; newHeap.rightmostChild.rightSibling=nextHeap; newHeap.rightmostChild=nextHeap; nextHeap.parent=newHeap; newHeap.degree++; nextHeap.rightSibling=null; nextHeap=newHeap.rightSibling; } } else{ if(currentHeap.degree==0){ nextHeap.rightmostChild=currentHeap; nextHeap.rightmostChild.root = nextHeap.rightmostChild;//add nextHeap.leftmostChild=currentHeap; nextHeap.leftmostChild.root = nextHeap.leftmostChild;//add currentHeap.parent=nextHeap; currentHeap.rightSibling=null; currentHeap.root=currentHeap;//add nextHeap.degree++; } else{ newHeap=nextHeap; newHeap.rightmostChild.rightSibling=currentHeap; newHeap.rightmostChild=currentHeap; currentHeap.parent= newHeap; newHeap.degree++; currentHeap=newHeap.rightSibling; currentHeap.rightSibling=null; } } } else{ currentHeap=currentHeap.rightSibling; nextHeap=nextHeap.rightSibling; } } return y; } public void Insert(int x){ /*BHeap newHeap = new BHeap(); newHeap.key=x; if(this.root==null){ this.root=newHeap; return; } else{ this.root=merge(newHeap,this.root); }*/ BHeap newHeap= new BHeap(); newHeap.key=x; if(this.root==null){ this.root=newHeap; } else{ this.root = merge(this,newHeap); }} public void RemoveMin(){ BHeap newHeap = new BHeap(); BHeap child = new BHeap(); newHeap=this; BHeap pos = newHeap.next; while(pos !=null){ if(pos.key<newHeap.key){ newHeap=pos; } pos=pos.rightSibling; } pos=this; BHeap B1 = new BHeap(); if(newHeap.previous!=null){ newHeap.previous.rightSibling=newHeap.rightSibling; B1 =pos.leftmostChild; B1.rightSibling=pos; pos.leftmostChild=pos.rightmostChild.leftmostChild; } else{ newHeap=newHeap.rightSibling; newHeap.previous.rightSibling=newHeap.rightSibling; B1 =pos.leftmostChild; B1.rightSibling=pos; pos.leftmostChild=pos.rightmostChild.leftmostChild; } merge(newHeap,B1); } public void Display(){ System.out.print("("); System.out.print(this.root.key); if(this.leftmostChild != null){ this.leftmostChild.Display(); } System.out.print(")"); if(this.rightSibling!=null){ this.rightSibling.Display(); } } }

  Read the article

• What&rsquo;s New in ASP.NET 4.0 Part Two: WebForms and Visual Studio Enhancements

  - by Rick Strahl

  In the last installment I talked about the core changes in the ASP.NET runtime that I’ve been taking advantage of. In this column, I’ll cover the changes to the Web Forms engine and some of the cool improvements in Visual Studio that make Web and general development easier. WebForms The WebForms engine is the area that has received most significant changes in ASP.NET 4.0. Probably the most widely anticipated features are related to managing page client ids and of ViewState on WebForm pages. Take Control of Your ClientIDs Unique ClientID generation in ASP.NET has been one of the most complained about “features” in ASP.NET. Although there’s a very good technical reason for these unique generated ids - they guarantee unique ids for each and every server control on a page - these unique and generated ids often get in the way of client-side JavaScript development and CSS styling as it’s often inconvenient and fragile to work with the long, generated ClientIDs. In ASP.NET 4.0 you can now specify an explicit client id mode on each control or each naming container parent control to control how client ids are generated. By default, ASP.NET generates mangled client ids for any control contained in a naming container (like a Master Page, or a User Control for example). The key to ClientID management in ASP.NET 4.0 are the new ClientIDMode and ClientIDRowSuffix properties. ClientIDMode supports four different ClientID generation settings shown below. For the following examples, imagine that you have a Textbox control named txtName inside of a master page control container on a WebForms page. <%@Page Language="C#"      MasterPageFile="~/Site.Master"     CodeBehind="WebForm2.aspx.cs"     Inherits="WebApplication1.WebForm2"  %> <asp:Content ID="content"  ContentPlaceHolderID="content"               runat="server"               ClientIDMode="Static" >       <asp:TextBox runat="server" ID="txtName" /> </asp:Content> The four available ClientIDMode values are: AutoID This is the existing behavior in ASP.NET 1.x-3.x where full naming container munging takes place. <input name="ctl00$content$txtName" type="text"        id="ctl00_content_txtName" /> This should be familiar to any ASP.NET developer and results in fairly unpredictable client ids that can easily change if the containership hierarchy changes. For example, removing the master page changes the name in this case, so if you were to move a block of script code that works against the control to a non-Master page, the script code immediately breaks. Static This option is the most deterministic setting that forces the control’s ClientID to use its ID value directly. No naming container naming at all is applied and you end up with clean client ids: <input name="ctl00$content$txtName"         type="text" id="txtName" /> Note that the name property which is used for postback variables to the server still is munged, but the ClientID property is displayed simply as the ID value that you have assigned to the control. This option is what most of us want to use, but you have to be clear on that because it can potentially cause conflicts with other controls on the page. If there are several instances of the same naming container (several instances of the same user control for example) there can easily be a client id naming conflict. Note that if you assign Static to a data-bound control, like a list child control in templates, you do not get unique ids either, so for list controls where you rely on unique id for child controls, you’ll probably want to use Predictable rather than Static. I’ll write more on this a little later when I discuss ClientIDRowSuffix. Predictable The previous two values are pretty self-explanatory. Predictable however, requires some explanation. To me at least it’s not in the least bit predictable. MSDN defines this value as follows: This algorithm is used for controls that are in data-bound controls. The ClientID value is generated by concatenating the ClientID value of the parent naming container with the ID value of the control. If the control is a data-bound control that generates multiple rows, the value of the data field specified in the ClientIDRowSuffix property is added at the end. For the GridView control, multiple data fields can be specified. If the ClientIDRowSuffix property is blank, a sequential number is added at the end instead of a data-field value. Each segment is separated by an underscore character (_). The key that makes this value a bit confusing is that it relies on the parent NamingContainer’s ClientID to build its own ClientID value. This effectively means that the value is not predictable at all but rather very tightly coupled to the parent naming container’s ClientIDMode setting. For my simple textbox example, if the ClientIDMode property of the parent naming container (Page in this case) is set to “Predictable” you’ll get this: <input name="ctl00$content$txtName" type="text"         id="content_txtName" /> which gives an id that based on walking up to the currently active naming container (the MasterPage content container) and starting the id formatting from there downward. Think of this as a semi unique name that’s guaranteed unique only for the naming container. If, on the other hand, the Page is set to “AutoID” you get the following with Predictable on txtName: <input name="ctl00$content$txtName" type="text"         id="ctl00_content_txtName" /> The latter is effectively the same as if you specified AutoID because it inherits the AutoID naming from the Page and Content Master Page control of the page. But again - predictable behavior always depends on the parent naming container and how it generates its id, so the id may not always be exactly the same as the AutoID generated value because somewhere in the NamingContainer chain the ClientIDMode setting may be set to a different value. For example, if you had another naming container in the middle that was set to Static you’d end up effectively with an id that starts with the NamingContainers id rather than the whole ctl000_content munging. The most common use for Predictable is likely to be for data-bound controls, which results in each data bound item getting a unique ClientID. Unfortunately, even here the behavior can be very unpredictable depending on which data-bound control you use - I found significant differences in how template controls in a GridView behave from those that are used in a ListView control. For example, GridView creates clean child ClientIDs, while ListView still has a naming container in the ClientID, presumably because of the template container on which you can’t set ClientIDMode. Predictable is useful, but only if all naming containers down the chain use this setting. Otherwise you’re right back to the munged ids that are pretty unpredictable. Another property, ClientIDRowSuffix, can be used in combination with ClientIDMode of Predictable to force a suffix onto list client controls. For example: <asp:GridView runat="server" ID="gvItems"              AutoGenerateColumns="false"             ClientIDMode="Static"              ClientIDRowSuffix="Id">     <Columns>     <asp:TemplateField>         <ItemTemplate>             <asp:Label runat="server" id="txtName"                        Text='<%# Eval("Name") %>'                   ClientIDMode="Predictable"/>         </ItemTemplate>     </asp:TemplateField>     <asp:TemplateField>         <ItemTemplate>         <asp:Label runat="server" id="txtId"                     Text='<%# Eval("Id") %>'                     ClientIDMode="Predictable" />         </ItemTemplate>     </asp:TemplateField>     </Columns>  </asp:GridView> generates client Ids inside of a column in the master page described earlier: <td>     <span id="txtName_0">Rick</span> </td> where the value after the underscore is the ClientIDRowSuffix field - in this case “Id” of the item data bound to the control. Note that all of the child controls require ClientIDMode=”Predictable” in order for the ClientIDRowSuffix to be applied, and the parent GridView controls need to be set to Static either explicitly or via Naming Container inheritance to give these simple names. It’s a bummer that ClientIDRowSuffix doesn’t work with Static to produce this automatically. Another real problem is that other controls process the ClientIDMode differently. For example, a ListView control processes the Predictable ClientIDMode differently and produces the following with the Static ListView and Predictable child controls: <span id="ctrl0_txtName_0">Rick</span> I couldn’t even figure out a way using ClientIDMode to get a simple ID that also uses a suffix short of falling back to manually generated ids using <%= %> expressions instead. Given the inconsistencies inside of list controls using <%= %>, ids for the ListView might not be a bad idea anyway. Inherit The final setting is Inherit, which is the default for all controls except Page. This means that controls by default inherit the parent naming container’s ClientIDMode setting. For more detailed information on ClientID behavior and different scenarios you can check out a blog post of mine on this subject: http://www.west-wind.com/weblog/posts/54760.aspx. ClientID Enhancements Summary The ClientIDMode property is a welcome addition to ASP.NET 4.0. To me this is probably the most useful WebForms feature as it allows me to generate clean IDs simply by setting ClientIDMode="Static" on either the page or inside of Web.config (in the Pages section) which applies the setting down to the entire page which is my 95% scenario. For the few cases when it matters - for list controls and inside of multi-use user controls or custom server controls) - I can use Predictable or even AutoID to force controls to unique names. For application-level page development, this is easy to accomplish and provides maximum usability for working with client script code against page controls. ViewStateMode Another area of large criticism for WebForms is ViewState. ViewState is used internally by ASP.NET to persist page-level changes to non-postback properties on controls as pages post back to the server. It’s a useful mechanism that works great for the overall mechanics of WebForms, but it can also cause all sorts of overhead for page operation as ViewState can very quickly get out of control and consume huge amounts of bandwidth in your page content. ViewState can also wreak havoc with client-side scripting applications that modify control properties that are tracked by ViewState, which can produce very unpredictable results on a Postback after client-side updates. Over the years in my own development, I’ve often turned off ViewState on pages to reduce overhead. Yes, you lose some functionality, but you can easily implement most of the common functionality in non-ViewState workarounds. Relying less on heavy ViewState controls and sticking with simpler controls or raw HTML constructs avoids getting around ViewState problems. In ASP.NET 3.x and prior, it wasn’t easy to control ViewState - you could turn it on or off and if you turned it off at the page or web.config level, you couldn’t turn it back on for specific controls. In short, it was an all or nothing approach. With ASP.NET 4.0, the new ViewStateMode property gives you more control. It allows you to disable ViewState globally either on the page or web.config level and then turn it back on for specific controls that might need it. ViewStateMode only works when EnableViewState="true" on the page or web.config level (which is the default). You can then use ViewStateMode of Disabled, Enabled or Inherit to control the ViewState settings on the page. If you’re shooting for minimal ViewState usage, the ideal situation is to set ViewStateMode to disabled on the Page or web.config level and only turn it back on particular controls: <%@Page Language="C#"      CodeBehind="WebForm2.aspx.cs"     Inherits="Westwind.WebStore.WebForm2"        ClientIDMode="Static"                ViewStateMode="Disabled"     EnableViewState="true"  %> <!-- this control has viewstate  --> <asp:TextBox runat="server" ID="txtName"  ViewStateMode="Enabled" />       <!-- this control has no viewstate - it inherits  from parent container --> <asp:TextBox runat="server" ID="txtAddress" /> Note that the EnableViewState="true" at the Page level isn’t required since it’s the default, but it’s important that the value is true. ViewStateMode has no effect if EnableViewState="false" at the page level. The main benefit of ViewStateMode is that it allows you to more easily turn off ViewState for most of the page and enable only a few key controls that might need it. For me personally, this is a perfect combination as most of my WebForm apps can get away without any ViewState at all. But some controls - especially third party controls - often don’t work well without ViewState enabled, and now it’s much easier to selectively enable controls rather than the old way, which required you to pretty much turn off ViewState for all controls that you didn’t want ViewState on. Inline HTML Encoding HTML encoding is an important feature to prevent cross-site scripting attacks in data entered by users on your site. In order to make it easier to create HTML encoded content, ASP.NET 4.0 introduces a new Expression syntax using <%: %> to encode string values. The encoding expression syntax looks like this: <%: "<script type='text/javascript'>" +     "alert('Really?');</script>" %> which produces properly encoded HTML: &lt;script type=&#39;text/javascript&#39; &gt;alert(&#39;Really?&#39;);&lt;/script&gt; Effectively this is a shortcut to: <%= HttpUtility.HtmlEncode( "<script type='text/javascript'>" + "alert('Really?');</script>") %> Of course the <%: %> syntax can also evaluate expressions just like <%= %> so the more common scenario applies this expression syntax against data your application is displaying. Here’s an example displaying some data model values: <%: Model.Address.Street %> This snippet shows displaying data from your application’s data store or more importantly, from data entered by users. Anything that makes it easier and less verbose to HtmlEncode text is a welcome addition to avoid potential cross-site scripting attacks. Although I listed Inline HTML Encoding here under WebForms, anything that uses the WebForms rendering engine including ASP.NET MVC, benefits from this feature. ScriptManager Enhancements The ASP.NET ScriptManager control in the past has introduced some nice ways to take programmatic and markup control over script loading, but there were a number of shortcomings in this control. The ASP.NET 4.0 ScriptManager has a number of improvements that make it easier to control script loading and addresses a few of the shortcomings that have often kept me from using the control in favor of manual script loading. The first is the AjaxFrameworkMode property which finally lets you suppress loading the ASP.NET AJAX runtime. Disabled doesn’t load any ASP.NET AJAX libraries, but there’s also an Explicit mode that lets you pick and choose the library pieces individually and reduce the footprint of ASP.NET AJAX script included if you are using the library. There’s also a new EnableCdn property that forces any script that has a new WebResource attribute CdnPath property set to a CDN supplied URL. If the script has this Attribute property set to a non-null/empty value and EnableCdn is enabled on the ScriptManager, that script will be served from the specified CdnPath. [assembly: WebResource(    "Westwind.Web.Resources.ww.jquery.js",    "application/x-javascript",    CdnPath =  "http://mysite.com/scripts/ww.jquery.min.js")] Cool, but a little too static for my taste since this value can’t be changed at runtime to point at a debug script as needed, for example. Assembly names for loading scripts from resources can now be simple names rather than fully qualified assembly names, which make it less verbose to reference scripts from assemblies loaded from your bin folder or the assembly reference area in web.config: <asp:ScriptManager runat="server" id="Id"          EnableCdn="true"         AjaxFrameworkMode="disabled">     <Scripts>         <asp:ScriptReference          Name="Westwind.Web.Resources.ww.jquery.js"         Assembly="Westwind.Web" />     </Scripts>        </asp:ScriptManager> The ScriptManager in 4.0 also supports script combining via the CompositeScript tag, which allows you to very easily combine scripts into a single script resource served via ASP.NET. Even nicer: You can specify the URL that the combined script is served with. Check out the following script manager markup that combines several static file scripts and a script resource into a single ASP.NET served resource from a static URL (allscripts.js): <asp:ScriptManager runat="server" id="Id"          EnableCdn="true"         AjaxFrameworkMode="disabled">     <CompositeScript          Path="~/scripts/allscripts.js">         <Scripts>             <asp:ScriptReference                    Path="~/scripts/jquery.js" />             <asp:ScriptReference                    Path="~/scripts/ww.jquery.js" />             <asp:ScriptReference            Name="Westwind.Web.Resources.editors.js"                 Assembly="Westwind.Web" />         </Scripts>     </CompositeScript> </asp:ScriptManager> When you render this into HTML, you’ll see a single script reference in the page: <script src="scripts/allscripts.debug.js"          type="text/javascript"></script> All you need to do to make this work is ensure that allscripts.js and allscripts.debug.js exist in the scripts folder of your application - they can be empty but the file has to be there. This is pretty cool, but you want to be real careful that you use unique URLs for each combination of scripts you combine or else browser and server caching will easily screw you up royally. The script manager also allows you to override native ASP.NET AJAX scripts now as any script references defined in the Scripts section of the ScriptManager trump internal references. So if you want custom behavior or you want to fix a possible bug in the core libraries that normally are loaded from resources, you can now do this simply by referencing the script resource name in the Name property and pointing at System.Web for the assembly. Not a common scenario, but when you need it, it can come in real handy. Still, there are a number of shortcomings in this control. For one, the ScriptManager and ClientScript APIs still have no common entry point so control developers are still faced with having to check and support both APIs to load scripts so that controls can work on pages that do or don’t have a ScriptManager on the page. The CdnUrl is static and compiled in, which is very restrictive. And finally, there’s still no control over where scripts get loaded on the page - ScriptManager still injects scripts into the middle of the HTML markup rather than in the header or optionally the footer. This, in turn, means there is little control over script loading order, which can be problematic for control developers. MetaDescription, MetaKeywords Page Properties There are also a number of additional Page properties that correspond to some of the other features discussed in this column: ClientIDMode, ClientTarget and ViewStateMode. Another minor but useful feature is that you can now directly access the MetaDescription and MetaKeywords properties on the Page object to set the corresponding meta tags programmatically. Updating these values programmatically previously required either <%= %> expressions in the page markup or dynamic insertion of literal controls into the page. You can now just set these properties programmatically on the Page object in any Control derived class on the page or the Page itself: Page.MetaKeywords = "ASP.NET,4.0,New Features"; Page.MetaDescription = "This article discusses the new features in ASP.NET 4.0"; Note, that there’s no corresponding ASP.NET tag for the HTML Meta element, so the only way to specify these values in markup and access them is via the @Page tag: <%@Page Language="C#"      CodeBehind="WebForm2.aspx.cs"     Inherits="Westwind.WebStore.WebForm2"      ClientIDMode="Static"                MetaDescription="Article that discusses what's                      new in ASP.NET 4.0"     MetaKeywords="ASP.NET,4.0,New Features" %> Nothing earth shattering but quite convenient. Visual Studio 2010 Enhancements for Web Development For Web development there are also a host of editor enhancements in Visual Studio 2010. Some of these are not Web specific but they are useful for Web developers in general. Text Editors Throughout Visual Studio 2010, the text editors have all been updated to a new core engine based on WPF which provides some interesting new features for various code editors including the nice ability to zoom in and out with Ctrl-MouseWheel to quickly change the size of text. There are many more API options to control the editor and although Visual Studio 2010 doesn’t yet use many of these features, we can look forward to enhancements in add-ins and future editor updates from the various language teams that take advantage of the visual richness that WPF provides to editing. On the negative side, I’ve noticed that occasionally the code editor and especially the HTML and JavaScript editors will lose the ability to use various navigation keys like arrows, back and delete keys, which requires closing and reopening the documents at times. This issue seems to be well documented so I suspect this will be addressed soon with a hotfix or within the first service pack. Overall though, the code editors work very well, especially given that they were re-written completely using WPF, which was one of my big worries when I first heard about the complete redesign of the editors. Multi-Targeting Visual Studio now targets all versions of the .NET framework from 2.0 forward. You can use Visual Studio 2010 to work on your ASP.NET 2, 3.0 and 3.5 applications which is a nice way to get your feet wet with the new development environment without having to make changes to existing applications. It’s nice to have one tool to work in for all the different versions. Multi-Monitor Support One cool feature of Visual Studio 2010 is the ability to drag windows out of the Visual Studio environment and out onto the desktop including onto another monitor easily. Since Web development often involves working with a host of designers at the same time - visual designer, HTML markup window, code behind and JavaScript editor - it’s really nice to be able to have a little more screen real estate to work on each of these editors. Microsoft made a welcome change in the environment. IntelliSense Snippets for HTML and JavaScript Editors The HTML and JavaScript editors now finally support IntelliSense scripts to create macro-based template expansions that have been in the core C# and Visual Basic code editors since Visual Studio 2005. Snippets allow you to create short XML-based template definitions that can act as static macros or real templates that can have replaceable values that can be embedded into the expanded text. The XML syntax for these snippets is straight forward and it’s pretty easy to create custom snippets manually. You can easily create snippets using XML and store them in your custom snippets folder (C:\Users\rstrahl\Documents\Visual Studio 2010\Code Snippets\Visual Web Developer\My HTML Snippets and My JScript Snippets), but it helps to use one of the third-party tools that exist to simplify the process for you. I use SnippetEditor, by Bill McCarthy, which makes short work of creating snippets interactively (http://snippeteditor.codeplex.com/). Note: You may have to manually add the Visual Studio 2010 User specific Snippet folders to this tool to see existing ones you’ve created. Code snippets are some of the biggest time savers and HTML editing more than anything deals with lots of repetitive tasks that lend themselves to text expansion. Visual Studio 2010 includes a slew of built-in snippets (that you can also customize!) and you can create your own very easily. If you haven’t done so already, I encourage you to spend a little time examining your coding patterns and find the repetitive code that you write and convert it into snippets. I’ve been using CodeRush for this for years, but now you can do much of the basic expansion natively for HTML and JavaScript snippets. jQuery Integration Is Now Native jQuery is a popular JavaScript library and recently Microsoft has recently stated that it will become the primary client-side scripting technology to drive higher level script functionality in various ASP.NET Web projects that Microsoft provides. In Visual Studio 2010, the default full project template includes jQuery as part of a new project including the support files that provide IntelliSense (-vsdoc files). IntelliSense support for jQuery is now also baked into Visual Studio 2010, so unlike Visual Studio 2008 which required a separate download, no further installs are required for a rich IntelliSense experience with jQuery. Summary ASP.NET 4.0 brings many useful improvements to the platform, but thankfully most of the changes are incremental changes that don’t compromise backwards compatibility and they allow developers to ease into the new features one feature at a time. None of the changes in ASP.NET 4.0 or Visual Studio 2010 are monumental or game changers. The bigger features are language and .NET Framework changes that are also optional. This ASP.NET and tools release feels more like fine tuning and getting some long-standing kinks worked out of the platform. It shows that the ASP.NET team is dedicated to paying attention to community feedback and responding with changes to the platform and development environment based on this feedback. If you haven’t gotten your feet wet with ASP.NET 4.0 and Visual Studio 2010, there’s no reason not to give it a shot now - the ASP.NET 4.0 platform is solid and Visual Studio 2010 works very well for a brand new release. Check it out. © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  

  Read the article

• What's New in ASP.NET 4

  - by Navaneeth

  The .NET Framework version 4 includes enhancements for ASP.NET 4 in targeted areas. Visual Studio 2010 and Microsoft Visual Web Developer Express also include enhancements and new features for improved Web development. This document provides an overview of many of the new features that are included in the upcoming release. This topic contains the following sections: ASP.NET Core Services ASP.NET Web Forms ASP.NET MVC Dynamic Data ASP.NET Chart Control Visual Web Developer Enhancements Web Application Deployment with Visual Studio 2010 Enhancements to ASP.NET Multi-Targeting ASP.NET Core Services ASP.NET 4 introduces many features that improve core ASP.NET services such as output caching and session state storage. Extensible Output Caching Since the time that ASP.NET 1.0 was released, output caching has enabled developers to store the generated output of pages, controls, and HTTP responses in memory. On subsequent Web requests, ASP.NET can serve content more quickly by retrieving the generated output from memory instead of regenerating the output from scratch. However, this approach has a limitation — generated content always has to be stored in memory. On servers that experience heavy traffic, the memory requirements for output caching can compete with memory requirements for other parts of a Web application. ASP.NET 4 adds extensibility to output caching that enables you to configure one or more custom output-cache providers. Output-cache providers can use any storage mechanism to persist HTML content. These storage options can include local or remote disks, cloud storage, and distributed cache engines. Output-cache provider extensibility in ASP.NET 4 lets you design more aggressive and more intelligent output-caching strategies for Web sites. For example, you can create an output-cache provider that caches the "Top 10" pages of a site in memory, while caching pages that get lower traffic on disk. Alternatively, you can cache every vary-by combination for a rendered page, but use a distributed cache so that the memory consumption is offloaded from front-end Web servers. You create a custom output-cache provider as a class that derives from the OutputCacheProvider type. You can then configure the provider in the Web.config file by using the new providers subsection of the outputCache element For more information and for examples that show how to configure the output cache, see outputCache Element for caching (ASP.NET Settings Schema). For more information about the classes that support caching, see the documentation for the OutputCache and OutputCacheProvider classes. By default, in ASP.NET 4, all HTTP responses, rendered pages, and controls use the in-memory output cache. The defaultProvider attribute for ASP.NET is AspNetInternalProvider. You can change the default output-cache provider used for a Web application by specifying a different provider name for defaultProvider attribute. In addition, you can select different output-cache providers for individual control and for individual requests and programmatically specify which provider to use. For more information, see the HttpApplication.GetOutputCacheProviderName(HttpContext) method. The easiest way to choose a different output-cache provider for different Web user controls is to do so declaratively by using the new providerName attribute in a page or control directive, as shown in the following example: <%@ OutputCache Duration="60" VaryByParam="None" providerName="DiskCache" %> Preloading Web Applications Some Web applications must load large amounts of data or must perform expensive initialization processing before serving the first request. In earlier versions of ASP.NET, for these situations you had to devise custom approaches to "wake up" an ASP.NET application and then run initialization code during the Application_Load method in the Global.asax file. To address this scenario, a new application preload manager (autostart feature) is available when ASP.NET 4 runs on IIS 7.5 on Windows Server 2008 R2. The preload feature provides a controlled approach for starting up an application pool, initializing an ASP.NET application, and then accepting HTTP requests. It lets you perform expensive application initialization prior to processing the first HTTP request. For example, you can use the application preload manager to initialize an application and then signal a load-balancer that the application was initialized and ready to accept HTTP traffic. To use the application preload manager, an IIS administrator sets an application pool in IIS 7.5 to be automatically started by using the following configuration in the applicationHost.config file: <applicationPools> <add name="MyApplicationPool" startMode="AlwaysRunning" /> </applicationPools> Because a single application pool can contain multiple applications, you specify individual applications to be automatically started by using the following configuration in the applicationHost.config file: <sites> <site name="MySite" id="1"> <application path="/" serviceAutoStartEnabled="true" serviceAutoStartProvider="PrewarmMyCache" > <!-- Additional content --> </application> </site> </sites> <!-- Additional content --> <serviceAutoStartProviders> <add name="PrewarmMyCache" type="MyNamespace.CustomInitialization, MyLibrary" /> </serviceAutoStartProviders> When an IIS 7.5 server is cold-started or when an individual application pool is recycled, IIS 7.5 uses the information in the applicationHost.config file to determine which Web applications have to be automatically started. For each application that is marked for preload, IIS7.5 sends a request to ASP.NET 4 to start the application in a state during which the application temporarily does not accept HTTP requests. When it is in this state, ASP.NET instantiates the type defined by the serviceAutoStartProvider attribute (as shown in the previous example) and calls into its public entry point. You create a managed preload type that has the required entry point by implementing the IProcessHostPreloadClient interface, as shown in the following example: public class CustomInitialization : System.Web.Hosting.IProcessHostPreloadClient { public void Preload(string[] parameters) { // Perform initialization. } } After your initialization code runs in the Preload method and after the method returns, the ASP.NET application is ready to process requests. Permanently Redirecting a Page Content in Web applications is often moved over the lifetime of the application. This can lead to links to be out of date, such as the links that are returned by search engines. In ASP.NET, developers have traditionally handled requests to old URLs by using the Redirect method to forward a request to the new URL. However, the Redirect method issues an HTTP 302 (Found) response (which is used for a temporary redirect). This results in an extra HTTP round trip. ASP.NET 4 adds a RedirectPermanent helper method that makes it easy to issue HTTP 301 (Moved Permanently) responses, as in the following example: RedirectPermanent("/newpath/foroldcontent.aspx"); Search engines and other user agents that recognize permanent redirects will store the new URL that is associated with the content, which eliminates the unnecessary round trip made by the browser for temporary redirects. Session State Compression By default, ASP.NET provides two options for storing session state across a Web farm. The first option is a session state provider that invokes an out-of-process session state server. The second option is a session state provider that stores data in a Microsoft SQL Server database. Because both options store state information outside a Web application's worker process, session state has to be serialized before it is sent to remote storage. If a large amount of data is saved in session state, the size of the serialized data can become very large. ASP.NET 4 introduces a new compression option for both kinds of out-of-process session state providers. By using this option, applications that have spare CPU cycles on Web servers can achieve substantial reductions in the size of serialized session state data. You can set this option using the new compressionEnabled attribute of the sessionState element in the configuration file. When the compressionEnabled configuration option is set to true, ASP.NET compresses (and decompresses) serialized session state by using the .NET Framework GZipStreamclass. The following example shows how to set this attribute. <sessionState mode="SqlServer" sqlConnectionString="data source=dbserver;Initial Catalog=aspnetstate" allowCustomSqlDatabase="true" compressionEnabled="true" /> ASP.NET Web Forms Web Forms has been a core feature in ASP.NET since the release of ASP.NET 1.0. Many enhancements have been in this area for ASP.NET 4, such as the following: The ability to set meta tags. More control over view state. Support for recently introduced browsers and devices. Easier ways to work with browser capabilities. Support for using ASP.NET routing with Web Forms. More control over generated IDs. The ability to persist selected rows in data controls. More control over rendered HTML in the FormView and ListView controls. Filtering support for data source controls. Enhanced support for Web standards and accessibility Setting Meta Tags with the Page.MetaKeywords and Page.MetaDescription Properties Two properties have been added to the Page class: MetaKeywords and MetaDescription. These two properties represent corresponding meta tags in the HTML rendered for a page, as shown in the following example: <head id="Head1" runat="server"> <title>Untitled Page</title> <meta name="keywords" content="keyword1, keyword2' /> <meta name="description" content="Description of my page" /> </head> These two properties work like the Title property does, and they can be set in the @ Page directive. For more information, see Page.MetaKeywords and Page.MetaDescription. Enabling View State for Individual Controls A new property has been added to the Control class: ViewStateMode. You can use this property to disable view state for all controls on a page except those for which you explicitly enable view state. View state data is included in a page's HTML and increases the amount of time it takes to send a page to the client and post it back. Storing more view state than is necessary can cause significant decrease in performance. In earlier versions of ASP.NET, you could reduce the impact of view state on a page's performance by disabling view state for specific controls. But sometimes it is easier to enable view state for a few controls that need it instead of disabling it for many that do not need it. For more information, see Control.ViewStateMode. Support for Recently Introduced Browsers and Devices ASP.NET includes a feature that is named browser capabilities that lets you determine the capabilities of the browser that a user is using. Browser capabilities are represented by the HttpBrowserCapabilities object which is stored in the HttpRequest.Browser property. Information about a particular browser's capabilities is defined by a browser definition file. In ASP.NET 4, these browser definition files have been updated to contain information about recently introduced browsers and devices such as Google Chrome, Research in Motion BlackBerry smart phones, and Apple iPhone. Existing browser definition files have also been updated. For more information, see How to: Upgrade an ASP.NET Web Application to ASP.NET 4 and ASP.NET Web Server Controls and Browser Capabilities. The browser definition files that are included with ASP.NET 4 are shown in the following list: •blackberry.browser •chrome.browser •Default.browser •firefox.browser •gateway.browser •generic.browser •ie.browser •iemobile.browser •iphone.browser •opera.browser •safari.browser A New Way to Define Browser Capabilities ASP.NET 4 includes a new feature referred to as browser capabilities providers. As the name suggests, this lets you build a provider that in turn lets you write custom code to determine browser capabilities. In ASP.NET version 3.5 Service Pack 1, you define browser capabilities in an XML file. This file resides in a machine-level folder or an application-level folder. Most developers do not need to customize these files, but for those who do, the provider approach can be easier than dealing with complex XML syntax. The provider approach makes it possible to simplify the process by implementing a common browser definition syntax, or a database that contains up-to-date browser definitions, or even a Web service for such a database. For more information about the new browser capabilities provider, see the What's New for ASP.NET 4 White Paper. Routing in ASP.NET 4 ASP.NET 4 adds built-in support for routing with Web Forms. Routing is a feature that was introduced with ASP.NET 3.5 SP1 and lets you configure an application to use URLs that are meaningful to users and to search engines because they do not have to specify physical file names. This can make your site more user-friendly and your site content more discoverable by search engines. For example, the URL for a page that displays product categories in your application might look like the following example: http://website/products.aspx?categoryid=12 By using routing, you can use the following URL to render the same information: http://website/products/software The second URL lets the user know what to expect and can result in significantly improved rankings in search engine results. the new features include the following: The PageRouteHandler class is a simple HTTP handler that you use when you define routes. You no longer have to write a custom route handler. The HttpRequest.RequestContext and Page.RouteData properties make it easier to access information that is passed in URL parameters. The RouteUrl expression provides a simple way to create a routed URL in markup. The RouteValue expression provides a simple way to extract URL parameter values in markup. The RouteParameter class makes it easier to pass URL parameter values to a query for a data source control (similar to FormParameter). You no longer have to change the Web.config file to enable routing. For more information about routing, see the following topics: ASP.NET Routing Walkthrough: Using ASP.NET Routing in a Web Forms Application How to: Define Routes for Web Forms Applications How to: Construct URLs from Routes How to: Access URL Parameters in a Routed Page Setting Client IDs The new ClientIDMode property makes it easier to write client script that references HTML elements rendered for server controls. Increasing use of Microsoft Ajax makes the need to do this more common. For example, you may have a data control that renders a long list of products with prices and you want to use client script to make a Web service call and update individual prices in the list as they change without refreshing the entire page. Typically you get a reference to an HTML element in client script by using the document.GetElementById method. You pass to this method the value of the id attribute of the HTML element you want to reference. In the case of elements that are rendered for ASP.NET server controls earlier versions of ASP.NET could make this difficult or impossible. You were not always able to predict what id values ASP.NET would generate, or ASP.NET could generate very long id values. The problem was especially difficult for data controls that would generate multiple rows for a single instance of the control in your markup. ASP.NET 4 adds two new algorithms for generating id attributes. These algorithms can generate id attributes that are easier to work with in client script because they are more predictable and that are easier to work with because they are simpler. For more information about how to use the new algorithms, see the following topics: ASP.NET Web Server Control Identification Walkthrough: Making Data-Bound Controls Easier to Access from JavaScript Walkthrough: Making Controls Located in Web User Controls Easier to Access from JavaScript How to: Access Controls from JavaScript by ID Persisting Row Selection in Data Controls The GridView and ListView controls enable users to select a row. In previous versions of ASP.NET, row selection was based on the row index on the page. For example, if you select the third item on page 1 and then move to page 2, the third item on page 2 is selected. In most cases, is more desirable not to select any rows on page 2. ASP.NET 4 supports Persisted Selection, a new feature that was initially supported only in Dynamic Data projects in the .NET Framework 3.5 SP1. When this feature is enabled, the selected item is based on the row data key. This means that if you select the third row on page 1 and move to page 2, nothing is selected on page 2. When you move back to page 1, the third row is still selected. This is a much more natural behavior than the behavior in earlier versions of ASP.NET. Persisted selection is now supported for the GridView and ListView controls in all projects. You can enable this feature in the GridView control, for example, by setting the EnablePersistedSelection property, as shown in the following example: <asp:GridView id="GridView2" runat="server" PersistedSelection="true"> </asp:GridView> FormView Control Enhancements The FormView control is enhanced to make it easier to style the content of the control with CSS. In previous versions of ASP.NET, the FormView control rendered it contents using an item template. This made styling more difficult in the markup because unexpected table row and table cell tags were rendered by the control. The FormView control supports RenderOuterTable, a property in ASP.NET 4. When this property is set to false, as show in the following example, the table tags are not rendered. This makes it easier to apply CSS style to the contents of the control. <asp:FormView ID="FormView1" runat="server" RenderTable="false"> For more information, see FormView Web Server Control Overview. ListView Control Enhancements The ListView control, which was introduced in ASP.NET 3.5, has all the functionality of the GridView control while giving you complete control over the output. This control has been made easier to use in ASP.NET 4. The earlier version of the control required that you specify a layout template that contained a server control with a known ID. The following markup shows a typical example of how to use the ListView control in ASP.NET 3.5. <asp:ListView ID="ListView1" runat="server"> <LayoutTemplate> <asp:PlaceHolder ID="ItemPlaceHolder" runat="server"></asp:PlaceHolder> </LayoutTemplate> <ItemTemplate> <% Eval("LastName")%> </ItemTemplate> </asp:ListView> In ASP.NET 4, the ListView control does not require a layout template. The markup shown in the previous example can be replaced with the following markup: <asp:ListView ID="ListView1" runat="server"> <ItemTemplate> <% Eval("LastName")%> </ItemTemplate> </asp:ListView> For more information, see ListView Web Server Control Overview. Filtering Data with the QueryExtender Control A very common task for developers who create data-driven Web pages is to filter data. This traditionally has been performed by building Where clauses in data source controls. This approach can be complicated, and in some cases the Where syntax does not let you take advantage of the full functionality of the underlying database. To make filtering easier, a new QueryExtender control has been added in ASP.NET 4. This control can be added to EntityDataSource or LinqDataSource controls in order to filter the data returned by these controls. Because the QueryExtender control relies on LINQ, but you do not to need to know how to write LINQ queries to use the query extender. The QueryExtender control supports a variety of filter options. The following lists QueryExtender filter options. Term Definition SearchExpression Searches a field or fields for string values and compares them to a specified string value. RangeExpression Searches a field or fields for values in a range specified by a pair of values. PropertyExpression Compares a specified value to a property value in a field. If the expression evaluates to true, the data that is being examined is returned. OrderByExpression Sorts data by a specified column and sort direction. CustomExpression Calls a function that defines custom filter in the page. For more information, see QueryExtenderQueryExtender Web Server Control Overview. Enhanced Support for Web Standards and Accessibility Earlier versions of ASP.NET controls sometimes render markup that does not conform to HTML, XHTML, or accessibility standards. ASP.NET 4 eliminates most of these exceptions. For details about how the HTML that is rendered by each control meets accessibility standards, see ASP.NET Controls and Accessibility. CSS for Controls that Can be Disabled In ASP.NET 3.5, when a control is disabled (see WebControl.Enabled), a disabled attribute is added to the rendered HTML element. For example, the following markup creates a Label control that is disabled: <asp:Label id="Label1" runat="server"   Text="Test" Enabled="false" /> In ASP.NET 3.5, the previous control settings generate the following HTML: <span id="Label1" disabled="disabled">Test</span> In HTML 4.01, the disabled attribute is not considered valid on span elements. It is valid only on input elements because it specifies that they cannot be accessed. On display-only elements such as span elements, browsers typically support rendering for a disabled appearance, but a Web page that relies on this non-standard behavior is not robust according to accessibility standards. For display-only elements, you should use CSS to indicate a disabled visual appearance. Therefore, by default ASP.NET 4 generates the following HTML for the control settings shown previously: <span id="Label1" class="aspNetDisabled">Test</span> You can change the value of the class attribute that is rendered by default when a control is disabled by setting the DisabledCssClass property. CSS for Validation Controls In ASP.NET 3.5, validation controls render a default color of red as an inline style. For example, the following markup creates a RequiredFieldValidator control: <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"   ErrorMessage="Required Field" ControlToValidate="RadioButtonList1" /> ASP.NET 3.5 renders the following HTML for the validator control: <span id="RequiredFieldValidator1"   style="color:Red;visibility:hidden;">RequiredFieldValidator</span> By default, ASP.NET 4 does not render an inline style to set the color to red. An inline style is used only to hide or show the validator, as shown in the following example: <span id="RequiredFieldValidator1"   style"visibility:hidden;">RequiredFieldValidator</span> Therefore, ASP.NET 4 does not automatically show error messages in red. For information about how to use CSS to specify a visual style for a validation control, see Validating User Input in ASP.NET Web Pages. CSS for the Hidden Fields Div Element ASP.NET uses hidden fields to store state information such as view state and control state. These hidden fields are contained by a div element. In ASP.NET 3.5, this div element does not have a class attribute or an id attribute. Therefore, CSS rules that affect all div elements could unintentionally cause this div to be visible. To avoid this problem, ASP.NET 4 renders the div element for hidden fields with a CSS class that you can use to differentiate the hidden fields div from others. The new classvalue is shown in the following example: <div class="aspNetHidden"> CSS for the Table, Image, and ImageButton Controls By default, in ASP.NET 3.5, some controls set the border attribute of rendered HTML to zero (0). The following example shows HTML that is generated by the Table control in ASP.NET 3.5: <table id="Table2" border="0"> The Image control and the ImageButton control also do this. Because this is not necessary and provides visual formatting information that should be provided by using CSS, the attribute is not generated in ASP.NET 4. CSS for the UpdatePanel and UpdateProgress Controls In ASP.NET 3.5, the UpdatePanel and UpdateProgress controls do not support expando attributes. This makes it impossible to set a CSS class on the HTMLelements that they render. In ASP.NET 4 these controls have been changed to accept expando attributes, as shown in the following example: <asp:UpdatePanel runat="server" class="myStyle"> </asp:UpdatePanel> The following HTML is rendered for this markup: <div id="ctl00_MainContent_UpdatePanel1" class="expandoclass"> </div> Eliminating Unnecessary Outer Tables In ASP.NET 3.5, the HTML that is rendered for the following controls is wrapped in a table element whose purpose is to apply inline styles to the entire control: FormView Login PasswordRecovery ChangePassword If you use templates to customize the appearance of these controls, you can specify CSS styles in the markup that you provide in the templates. In that case, no extra outer table is required. In ASP.NET 4, you can prevent the table from being rendered by setting the new RenderOuterTable property to false. Layout Templates for Wizard Controls In ASP.NET 3.5, the Wizard and CreateUserWizard controls generate an HTML table element that is used for visual formatting. In ASP.NET 4 you can use a LayoutTemplate element to specify the layout. If you do this, the HTML table element is not generated. In the template, you create placeholder controls to indicate where items should be dynamically inserted into the control. (This is similar to how the template model for the ListView control works.) For more information, see the Wizard.LayoutTemplate property. New HTML Formatting Options for the CheckBoxList and RadioButtonList Controls ASP.NET 3.5 uses HTML table elements to format the output for the CheckBoxList and RadioButtonList controls. To provide an alternative that does not use tables for visual formatting, ASP.NET 4 adds two new options to the RepeatLayout enumeration: UnorderedList. This option causes the HTML output to be formatted by using ul and li elements instead of a table. OrderedList. This option causes the HTML output to be formatted by using ol and li elements instead of a table. For examples of HTML that is rendered for the new options, see the RepeatLayout enumeration. Header and Footer Elements for the Table Control In ASP.NET 3.5, the Table control can be configured to render thead and tfoot elements by setting the TableSection property of the TableHeaderRow class and the TableFooterRow class. In ASP.NET 4 these properties are set to the appropriate values by default. CSS and ARIA Support for the Menu Control In ASP.NET 3.5, the Menu control uses HTML table elements for visual formatting, and in some configurations it is not keyboard-accessible. ASP.NET 4 addresses these problems and improves accessibility in the following ways: The generated HTML is structured as an unordered list (ul and li elements). CSS is used for visual formatting. The menu behaves in accordance with ARIA standards for keyboard access. You can use arrow keys to navigate menu items. (For information about ARIA, see Accessibility in Visual Studio and ASP.NET.) ARIA role and property attributes are added to the generated HTML. (Attributes are added by using JavaScript instead of included in the HTML, to avoid generating HTML that would cause markup validation errors.) Styles for the Menu control are rendered in a style block at the top of the page, instead of inline with the rendered HTML elements. If you want to use a separate CSS file so that you can modify the menu styles, you can set the Menu control's new IncludeStyleBlock property to false, in which case the style block is not generated. Valid XHTML for the HtmlForm Control In ASP.NET 3.5, the HtmlForm control (which is created implicitly by the <form runat="server"> tag) renders an HTML form element that has both name and id attributes. The name attribute is deprecated in XHTML 1.1. Therefore, this control does not render the name attribute in ASP.NET 4. Maintaining Backward Compatibility in Control Rendering An existing ASP.NET Web site might have code in it that assumes that controls are rendering HTML the way they do in ASP.NET 3.5. To avoid causing backward compatibility problems when you upgrade the site to ASP.NET 4, you can have ASP.NET continue to generate HTML the way it does in ASP.NET 3.5 after you upgrade the site. To do so, you can set the controlRenderingCompatibilityVersion attribute of the pages element to "3.5" in the Web.config file of an ASP.NET 4 Web site, as shown in the following example: <system.web>   <pages controlRenderingCompatibilityVersion="3.5"/> </system.web> If this setting is omitted, the default value is the same as the version of ASP.NET that the Web site targets. (For information about multi-targeting in ASP.NET, see .NET Framework Multi-Targeting for ASP.NET Web Projects.) ASP.NET MVC ASP.NET MVC helps Web developers build compelling standards-based Web sites that are easy to maintain because it decreases the dependency among application layers by using the Model-View-Controller (MVC) pattern. MVC provides complete control over the page markup. It also improves testability by inherently supporting Test Driven Development (TDD). Web sites created using ASP.NET MVC have a modular architecture. This allows members of a team to work independently on the various modules and can be used to improve collaboration. For example, developers can work on the model and controller layers (data and logic), while the designer work on the view (presentation). For tutorials, walkthroughs, conceptual content, code samples, and a complete API reference, see ASP.NET MVC 2. Dynamic Data Dynamic Data was introduced in the .NET Framework 3.5 SP1 release in mid-2008. This feature provides many enhancements for creating data-driven applications, such as the following: A RAD experience for quickly building a data-driven Web site. Automatic validation that is based on constraints defined in the data model. The ability to easily change the markup that is generated for fields in the GridView and DetailsView controls by using field templates that are part of your Dynamic Data project. For ASP.NET 4, Dynamic Data has been enhanced to give developers even more power for quickly building data-driven Web sites. For more information, see ASP.NET Dynamic Data Content Map. Enabling Dynamic Data for Individual Data-Bound Controls in Existing Web Applications You can use Dynamic Data features in existing ASP.NET Web applications that do not use scaffolding by enabling Dynamic Data for individual data-bound controls. Dynamic Data provides the presentation and data layer support for rendering these controls. When you enable Dynamic Data for data-bound controls, you get the following benefits: Setting default values for data fields. Dynamic Data enables you to provide default values at run time for fields in a data control. Interacting with the database without creating and registering a data model. Automatically validating the data that is entered by the user without writing any code. For more information, see Walkthrough: Enabling Dynamic Data in ASP.NET Data-Bound Controls. New Field Templates for URLs and E-mail Addresses ASP.NET 4 introduces two new built-in field templates, EmailAddress.ascx and Url.ascx. These templates are used for fields that are marked as EmailAddress or Url using the DataTypeAttribute attribute. For EmailAddress objects, the field is displayed as a hyperlink that is created by using the mailto: protocol. When users click the link, it opens the user's e-mail client and creates a skeleton message. Objects typed as Url are displayed as ordinary hyperlinks. The following example shows how to mark fields. [DataType(DataType.EmailAddress)] public object HomeEmail { get; set; } [DataType(DataType.Url)] public object Website { get; set; } Creating Links with the DynamicHyperLink Control Dynamic Data uses the new routing feature that was added in the .NET Framework 3.5 SP1 to control the URLs that users see when they access the Web site. The new DynamicHyperLink control makes it easy to build links to pages in a Dynamic Data site. For information, see How to: Create Table Action Links in Dynamic Data Support for Inheritance in the Data Model Both the ADO.NET Entity Framework and LINQ to SQL support inheritance in their data models. An example of this might be a database that has an InsurancePolicy table. It might also contain CarPolicy and HousePolicy tables that have the same fields as InsurancePolicy and then add more fields. Dynamic Data has been modified to understand inherited objects in the data model and to support scaffolding for the inherited tables. For more information, see Walkthrough: Mapping Table-per-Hierarchy Inheritance in Dynamic Data. Support for Many-to-Many Relationships (Entity Framework Only) The Entity Framework has rich support for many-to-many relationships between tables, which is implemented by exposing the relationship as a collection on an Entity object. New field templates (ManyToMany.ascx and ManyToMany_Edit.ascx) have been added to provide support for displaying and editing data that is involved in many-to-many relationships. For more information, see Working with Many-to-Many Data Relationships in Dynamic Data. New Attributes to Control Display and Support Enumerations The DisplayAttribute has been added to give you additional control over how fields are displayed. The DisplayNameAttribute attribute in earlier versions of Dynamic Data enabled you to change the name that is used as a caption for a field. The new DisplayAttribute class lets you specify more options for displaying a field, such as the order in which a field is displayed and whether a field will be used as a filter. The attribute also provides independent control of the name that is used for the labels in a GridView control, the name that is used in a DetailsView control, the help text for the field, and the watermark used for the field (if the field accepts text input). The EnumDataTypeAttribute class has been added to let you map fields to enumerations. When you apply this attribute to a field, you specify an enumeration type. Dynamic Data uses the new Enumeration.ascx field template to create UI for displaying and editing enumeration values. The template maps the values from the database to the names in the enumeration. Enhanced Support for Filters Dynamic Data 1.0 had built-in filters for Boolean columns and foreign-key columns. The filters did not let you specify the order in which they were displayed. The new DisplayAttribute attribute addresses this by giving you control over whether a column appears as a filter and in what order it will be displayed. An additional enhancement is that filtering support has been rewritten to use the new QueryExtender feature of Web Forms. This lets you create filters without requiring knowledge of the data source control that the filters will be used with. Along with these extensions, filters have also been turned into template controls, which lets you add new ones. Finally, the DisplayAttribute class mentioned earlier allows the default filter to be overridden, in the same way that UIHint allows the default field template for a column to be overridden. For more information, see Walkthrough: Filtering Rows in Tables That Have a Parent-Child Relationship and QueryableFilterRepeater. ASP.NET Chart Control The ASP.NET chart server control enables you to create ASP.NET pages applications that have simple, intuitive charts for complex statistical or financial analysis. The chart control supports the following features: Data series, chart areas, axes, legends, labels, titles, and more. Data binding. Data manipulation, such as copying, splitting, merging, alignment, grouping, sorting, searching, and filtering. Statistical formulas and financial formulas. Advanced chart appearance, such as 3-D, anti-aliasing, lighting, and perspective. Events and customizations. Interactivity and Microsoft Ajax. Support for the Ajax Content Delivery Network (CDN), which provides an optimized way for you to add Microsoft Ajax Library and jQuery scripts to your Web applications. For more information, see Chart Web Server Control Overview. Visual Web Developer Enhancements The following sections provide information about enhancements and new features in Visual Studio 2010 and Visual Web Developer Express. The Web page designer in Visual Studio 2010 has been enhanced for better CSS compatibility, includes additional support for HTML and ASP.NET markup snippets, and features a redesigned version of IntelliSense for JScript. Improved CSS Compatibility The Visual Web Developer designer in Visual Studio 2010 has been updated to improve CSS 2.1 standards compliance. The designer better preserves HTML source code and is more robust than in previous versions of Visual Studio. HTML and JScript Snippets In the HTML editor, IntelliSense auto-completes tag names. The IntelliSense Snippets feature auto-completes whole tags and more. In Visual Studio 2010, IntelliSense snippets are supported for JScript, alongside C# and Visual Basic, which were supported in earlier versions of Visual Studio. Visual Studio 2010 includes over 200 snippets that help you auto-complete common ASP.NET and HTML tags, including required attributes (such as runat="server") and common attributes specific to a tag (such as ID, DataSourceID, ControlToValidate, and Text). You can download additional snippets, or you can write your own snippets that encapsulate the blocks of markup that you or your team use for common tasks. For more information on HTML snippets, see Walkthrough: Using HTML Snippets. JScript IntelliSense Enhancements In Visual 2010, JScript IntelliSense has been redesigned to provide an even richer editing experience. IntelliSense now recognizes objects that have been dynamically generated by methods such as registerNamespace and by similar techniques used by other JavaScript frameworks. Performance has been improved to analyze large libraries of script and to display IntelliSense with little or no processing delay. Compatibility has been significantly increased to support almost all third-party libraries and to support diverse coding styles. Documentation comments are now parsed as you type and are immediately leveraged by IntelliSense. Web Application Deployment with Visual Studio 2010 For Web application projects, Visual Studio now provides tools that work with the IIS Web Deployment Tool (Web Deploy) to automate many processes that had to be done manually in earlier versions of ASP.NET. For example, the following tasks can now be automated: Creating an IIS application on the destination computer and configuring IIS settings. Copying files to the destination computer. Changing Web.config settings that must be different in the destination environment. Propagating changes to data or data structures in SQL Server databases that are used by the Web application. For more information about Web application deployment, see ASP.NET Deployment Content Map. Enhancements to ASP.NET Multi-Targeting ASP.NET 4 adds new features to the multi-targeting feature to make it easier to work with projects that target earlier versions of the .NET Framework. Multi-targeting was introduced in ASP.NET 3.5 to enable you to use the latest version of Visual Studio without having to upgrade existing Web sites or Web services to the latest version of the .NET Framework. In Visual Studio 2008, when you work with a project targeted for an earlier version of the .NET Framework, most features of the development environment adapt to the targeted version. However, IntelliSense displays language features that are available in the current version, and property windows display properties available in the current version. In Visual Studio 2010, only language features and properties available in the targeted version of the .NET Framework are shown. For more information about multi-targeting, see the following topics: .NET Framework Multi-Targeting for ASP.NET Web Projects ASP.NET Side-by-Side Execution Overview How to: Host Web Applications That Use Different Versions of the .NET Framework on the Same Server How to: Deploy Web Site Projects Targeted for Earlier Versions of the .NET Framework

  Read the article

• Windows 8 RTM ‘Keyboard Shortcuts’ Super List

  - by Asian Angel

  Now that Windows 8 RTM has been out for a bit you may be wondering about all of the new keyboard shortcuts associated with the system. Yash Tolia from the MSDN blog has put together a super list of all the keyboard shortcuts you could ever want into one awesome post. A quick copy, paste, and save/print using your favorite word processing program will help keep this terrific list on hand for easy reference whenever you need it! List of Windows 8 Shortcuts [Nirmal TV] HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

  Read the article

• Problem with hadoop start-dfs.sh

  - by user288501

  I installed and configured hadoop on my Ubuntu 14.04 server, virtualized inside of hyper-v, however I am getting an issue when i run start-dfs.sh root@sUbuntu01:/var/log# start-dfs.sh 14/06/04 15:27:08 WARN util.NativeCodeLoader: Unable to load native-hadoop library for your platform... using builtin-java classes where applicable Starting namenodes on [OpenJDK 64-Bit Server VM warning: You have loaded library /usr/local/hadoop/lib/native/libhadoop.so.1.0.0 which might have disabled stack guard. The VM will try to fix the stack guard now. It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'. localhost] sed: -e expression #1, char 6: unknown option to `s' -c: Unknown cipher type 'cd' localhost: Ubuntu 14.04 LTS localhost: starting namenode, logging to /usr/local/hadoop/logs/hadoop-root-namenode-sUbuntu01.out noexecstack'.: ssh: Could not resolve hostname noexecstack'.: Name or service not known '-z: ssh: Could not resolve hostname '-z: Name or service not known 'execstack: ssh: Could not resolve hostname 'execstack: Name or service not known disabled: ssh: Could not resolve hostname disabled: Name or service not known with: ssh: Could not resolve hostname with: Name or service not known have: ssh: Could not resolve hostname have: Name or service not known VM: ssh: Could not resolve hostname vm: Name or service not known stack: ssh: Could not resolve hostname stack: Name or service not known guard: ssh: Could not resolve hostname guard: Name or service not known fix: ssh: Could not resolve hostname fix: Name or service not known VM: ssh: Could not resolve hostname vm: Name or service not known the: ssh: Could not resolve hostname the: Name or service not known to: ssh: Could not resolve hostname to: Name or service not known warning:: ssh: Could not resolve hostname warning:: Name or service not known it: ssh: Could not resolve hostname it: Name or service not known now.: ssh: Could not resolve hostname now.: Name or service not known library: ssh: Could not resolve hostname library: Name or service not known will: ssh: Could not resolve hostname will: Name or service not known link: ssh: Could not resolve hostname link: Name or service not known or: ssh: Could not resolve hostname or: Name or service not known It's: ssh: Could not resolve hostname it's: Name or service not known <libfile>',: ssh: Could not resolve hostname <libfile>',: Name or service not known which: ssh: connect to host which port 22: Connection timed out have: ssh: connect to host have port 22: Connection timed out you: ssh: connect to host you port 22: Connection timed out try: ssh: connect to host try port 22: Connection timed out the: ssh: connect to host the port 22: Connection timed out highly: ssh: connect to host highly port 22: Connection timed out might: ssh: connect to host might port 22: Connection timed out loaded: ssh: connect to host loaded port 22: Connection timed out You: ssh: connect to host you port 22: Connection timed out guard.: ssh: connect to host guard. port 22: Connection timed out library: ssh: connect to host library port 22: Connection timed out Server: ssh: connect to host server port 22: Connection timed out fix: ssh: connect to host fix port 22: Connection timed out The: ssh: connect to host the port 22: Connection timed out recommended: ssh: connect to host recommended port 22: Connection timed out that: ssh: connect to host that port 22: Connection timed out stack: ssh: connect to host stack port 22: Connection timed out OpenJDK: ssh: connect to host openjdk port 22: Connection timed out 64-Bit: ssh: connect to host 64-bit port 22: Connection timed out with: ssh: connect to host with port 22: Connection timed out localhost: Ubuntu 14.04 LTS localhost: starting datanode, logging to /usr/local/hadoop/logs/hadoop-root-datanode-sUbuntu01.out localhost: OpenJDK 64-Bit Server VM warning: You have loaded library /usr/local/hadoop/lib/native/libhadoop.so.1.0.0 which might have disabled stack guard. The VM will try to fix the stack guard now. localhost: It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'. Starting secondary namenodes [OpenJDK 64-Bit Server VM warning: You have loaded library /usr/local/hadoop/lib/native/libhadoop.so.1.0.0 which might have disabled stack guard. The VM will try to fix the stack guard now. It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'. 0.0.0.0] sed: -e expression #1, char 6: unknown option to `s' warning:: ssh: Could not resolve hostname warning:: Name or service not known -c: Unknown cipher type 'cd' It's: ssh: Could not resolve hostname it's: Name or service not known 'execstack: ssh: Could not resolve hostname 'execstack: Name or service not known '-z: ssh: Could not resolve hostname '-z: Name or service not known 0.0.0.0: Ubuntu 14.04 LTS 0.0.0.0: starting secondarynamenode, logging to /usr/local/hadoop/logs/hadoop-root-secondarynamenode-sUbuntu01.out 0.0.0.0: OpenJDK 64-Bit Server VM warning: You have loaded library /usr/local/hadoop/lib/native/libhadoop.so.1.0.0 which might have disabled stack guard. The VM will try to fix the stack guard now. 0.0.0.0: It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'. noexecstack'.: ssh: Could not resolve hostname noexecstack'.: Name or service not known <libfile>',: ssh: Could not resolve hostname <libfile>',: Name or service not known link: ssh: Could not resolve hostname link: No address associated with hostname it: ssh: Could not resolve hostname it: No address associated with hostname to: ssh: connect to host to port 22: Connection timed out or: ssh: connect to host or port 22: Connection timed out you: ssh: connect to host you port 22: Connection timed out guard.: ssh: connect to host guard. port 22: Connection timed out VM: ssh: connect to host vm port 22: Connection timed out stack: ssh: connect to host stack port 22: Connection timed out library: ssh: connect to host library port 22: Connection timed out Server: ssh: connect to host server port 22: Connection timed out might: ssh: connect to host might port 22: Connection timed out stack: ssh: connect to host stack port 22: Connection timed out You: ssh: connect to host you port 22: Connection timed out now.: ssh: connect to host now. port 22: Connection timed out disabled: ssh: connect to host disabled port 22: Connection timed out have: ssh: connect to host have port 22: Connection timed out will: ssh: connect to host will port 22: Connection timed out The: ssh: connect to host the port 22: Connection timed out have: ssh: connect to host have port 22: Connection timed out try: ssh: connect to host try port 22: Connection timed out the: ssh: connect to host the port 22: Connection timed out guard: ssh: connect to host guard port 22: Connection timed out the: ssh: connect to host the port 22: Connection timed out recommended: ssh: connect to host recommended port 22: Connection timed out with: ssh: connect to host with port 22: Connection timed out library: ssh: connect to host library port 22: Connection timed out 64-Bit: ssh: connect to host 64-bit port 22: Connection timed out fix: ssh: connect to host fix port 22: Connection timed out which: ssh: connect to host which port 22: Connection timed out VM: ssh: connect to host vm port 22: Connection timed out OpenJDK: ssh: connect to host openjdk port 22: Connection timed out fix: ssh: connect to host fix port 22: Connection timed out highly: ssh: connect to host highly port 22: Connection timed out that: ssh: connect to host that port 22: Connection timed out with: ssh: connect to host with port 22: Connection timed out loaded: ssh: connect to host loaded port 22: Connection timed out 14/06/04 15:36:02 WARN util.NativeCodeLoader: Unable to load native-hadoop library for your platform... using builtin-java classes where applicable Any advice?

  Read the article

• Integrate Nitro PDF Reader with Windows 7

  - by Matthew Guay

  Would you like a lightweight PDF reader that integrates nicely with Office and Windows 7?  Here we look at the new Nitro PDF Reader, a nice PDF viewer that also lets you create and markup PDF files. Adobe Reader is the de-facto PDF viewer, but it only lets you view PDFs and not much else.  Additionally, it doesn’t fully integrate with 64-bit editions of Vista and Windows 7.  There are many alternate PDF readers, but Nitro PDF Reader is a new entry into this field that offers more features than most PDF readers.  From the creators of the popular free PrimoPDF printer, the new Reader lets you create PDFs from a variety of file formats and markup existing PDFs with notes, highlights, stamps, and more in addition to viewing PDFs.  It also integrates great with Windows 7 using the Office 2010 ribbon interface. Getting Started Download the free Nitro PDF Reader (link below) and install as normal.  Nitro PDF Reader has separate versions for 32 & 64-bit editions of Windows, so download the correct one for your computer. Note:  Nitro PDF Reader is still in Beta testing, so only install if you’re comfortable with using beta software. On first run, Nitro PDF Reader will ask if you want to make it the default PDF viewer.  If you don’t want to, make sure to uncheck the box beside Always perform this check to keep it from opening this prompt every time you use it. It will also open an introductory PDF the first time you run it so you can quickly get acquainted with its features. Windows 7 Integration One of the first things you’ll notice is that Nitro PDF Reader integrates great with Windows 7.  The ribbon interface fits right in with native applications such as WordPad and Paint, as well as Office 2010. If you set Nitro PDF Reader as your default PDF viewer, you’ll see thumbnails of your PDFs in Windows Explorer. If you turn on the Preview Pane, you can read full PDFs in Windows Explorer.  Adobe Reader lets you do this in 32 bit versions, but Nitro PDF works in 64 bit versions too. The PDF preview even works in Outlook.  If you receive an email with a PDF attachment, you can select the PDF and view it directly in the Reading Pane.  Click the Preview file button, and you can uncheck the box at the bottom so PDFs will automatically open for preview if you want.   Now you can read your PDF attachments in Outlook without opening them separately.  This works in both Outlook 2007 and 2010. Edit your PDFs Adobe Reader only lets you view PDF files, and you can’t save data you enter in PDF forms.  Nitro PDF Reader, however, gives you several handy markup tools you can use to edit your PDFs.  When you’re done, you can save the final PDF, including information entered into forms. With the ribbon interface, it’s easy to find the tools you want to edit your PDFs. Here we’ve highlighted text in a PDF and added a note to it.  We can now save these changes, and they’ll look the same in any PDF reader, including Adobe Reader. You can also enter new text in PDFs.  This will open a new tab in the ribbon, where you can select basic font settings.  Select the Click To Finish button in the ribbon when you’re finished editing text.   Or, if you want to use the text or pictures from a PDF in another application, you can choose to extract them directly in Nitro PDF Reader.  Create PDFs One of the best features of Nitro PDF Reader is the ability to create PDFs from almost any file.  Nitro adds a new virtual printer to your computer that creates PDF files from anything you can print.  Print your file as normal, but select the Nitro PDF Creator (Reader) printer. Enter a name for your PDF, select if you want to edit the PDF properties, and click Create. If you choose to edit the PDF properties, you can add your name and information to the file, select the initial view, encrypt it, and restrict permissions. Alternately, you can create a PDF from almost any file by simply drag-and-dropping it into Nitro PDF Reader.  It will automatically convert the file to PDF and open it in a new tab in Nitro PDF. Now from the File menu you can send the PDF as an email attachment so anyone can view it. Make sure to save the PDF before closing Nitro, as it does not automatically save the PDF file.   Conclusion Nitro PDF Reader is a nice alternative to Adobe Reader, and offers some features that are only available in the more expensive Adobe Acrobat.  With great Windows 7 integration, including full support for 64-bit editions, Nitro fits in with the Windows and Office experience very nicely.  If you have tried out Nitro PDF Reader leave a comment and let us know what you think. Link Download Nitro PDF Reader Similar Articles Productive Geek Tips Install Adobe PDF Reader on Ubuntu EdgySubscribe to RSS Feeds in Chrome with a Single ClickChange Default Feed Reader in FirefoxFix for Windows Explorer Folder Pane in XP Becomes Grayed OutRemove "Please wait while the document is being prepared for reading" Message in Adobe Reader 8 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 tinysong gives a shortened URL for you to post on Twitter (or anywhere) 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes

  Read the article

• Low graphics performance with Intel HD graphics

  - by neil

  hey, my laptop should be capable of running some games fine but doesn't. Examples are egoboo and tome. http://www.ebuyer.com/product/237739 this is my laptop. I tried the gears test and i only get 60 FPS, on IRC they said thats a big issue and should try the forums. I am using Ubuntu 11.04 and was told I should have the newest drivers. neil@neil-K52F:~$ /usr/lib/nux/unity_support_test --print OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ironlake Mobile GEM 20100330 DEVELOPMENT OpenGL version string: 2.1 Mesa 7.10.2 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity supported: yes

  Read the article

• Security Trimmed Cross Site Collection Navigation

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). This article will serve as documentation of a fully functional codeplex project that I just created. This project will give you a WebPart that will give you security trimmed navigation across site collections. The first question is, why create such a project? In every single SharePoint project you will do, one question you will always be faced with is, what should the boundaries of sites be, and what should the boundaries of site collections be? There is no good or bad answer to this, because it really really depends on your needs. There are some factors in play here. Site Collections will allow you to scale, as a Site collection is the smallest entity you can put inside a content database Site collections will allow you to offer different levels of SLAs, because you put a site collection on a separate content database, and put that database on a separate server. Site collections are a security boundary – and they can be moved around at will without affecting other site collections. Site collections are also a branding boundary. They are also a feature deployment boundary, so you can have two site collections on the same web application with completely different nature of services. But site collections break navigation, i.e. a site collection at “/”, and a site collection at “/sites/mySiteCollection”, are completely independent of each other. If you have access to both, the navigation of / won’t show you a link to /sites/mySiteCollection. Some people refer to this as a huge issue in SharePoint. Luckily, some workarounds exist. A long time ago, I had blogged about “Implementing Consistent Navigation across Site Collections”. That approach was a no-code solution, it worked – it gave you a consistent navigation across site collections. But, it didn’t work in a security trimmed fashion! i.e., if I don’t have access to Site Collection ‘X’, it would still show me a link to ‘X’. Well this project gets around that issue. Simply deploy this project, and it’ll give you a WebPart. You can use that WebPart as either a webpart or as a server control dropped via SharePoint designer, and it will give you Security Trimmed Cross Site Collection Navigation. The code has been written for SP2010, but it will work in SP2007 with the help of http://spwcfsupport.codeplex.com . What do I need to do to make it work? I’m glad you asked! Simple! Deploy the .wsp (which you can download here). This will give you a site collection feature called “Winsmarts Cross Site Collection Navigation” as shown below. Go ahead and activate it, and this will give you a WebPart called “Winsmarts Navigation Web Part” as shown below: Just drop this WebPart on your page, and it will show you all site collections that the currently logged in user has access to. Really it’s that easy! This is shown as below - In the above example, I have two site collections that I created at /sites/SiteCollection1 and /sites/SiteCollection2. The navigation shows the titles. You see some extraneous crap as well, you might want to clean that – I’ll talk about that in a minute. What? You’re running into problems? If the problem you’re running into is that you are prompted to login three times, and then it shows a blank webpart that says “Loading your applications ..” and then craps out!, then most probably you’re using a different authentication scheme. Behind the scenes I use a custom WCF service to perform this job. OOTB, I’ve set it to work with NTLM, but if you need to make it work alternate authentications such as forms based auth, or client side certs, you will need to edit the %14%\ISAPI\Winsmarts.CrossSCNav\web.config file, specifically, this section - 1: <bindings> 2: <webHttpBinding> 3: <binding name="customWebHttpBinding"> 4: <security mode="TransportCredentialOnly"> 5: <transport clientCredentialType="Ntlm"/> 6: </security> 7: </binding> 8: </webHttpBinding> 9: </bindings> For Kerberos, change the “clientCredentialType” to “Windows” For Forms auth, remove that transport line For client certs – well that’s a bit more involved, but it’s just web.config changes – hit a good book on WCF or hire me for a billion trillion $. But fair warning, I might be too busy to help immediately. If you’re running into a different problem, please leave a comment below, but the code is pretty rock solid, so .. hmm .. check what you’re doing! BTW, I don’t  make any guarantee/warranty on this – if this code makes you sterile, unpopular, bad hairstyle, anything else, that is your problem! But, there are some known issues - I wrote this as a concept – you can easily extend it to be more flexible. Example, hierarchical nav, or, horizontal nav, jazzy effects with jquery or silverlight– all those are possible very very easily. This webpart is not smart enough to co-exist with another instance of itself on the same page. I can easily extend it to do so, which I will do in my spare(!?) time! Okay good! But that’s not all! As you can see, just dropping the WebPart may show you many extraneous site collections, or maybe you want to restrict which site collections are shown, or exclude a certain site collection to be shown from the navigation. To support that, I created a property on the WebPart called “UrlMatchPattern”, which is a regex expression you specify to trim the results :). So, just edit the WebPart, and specify a string property of “http://sp2010/sites/” as shown below. Note that you can put in whatever regex expression you want! So go crazy, I don’t care! And this gives you a cleaner look.   w00t! Enjoy! Comment on the article ....

  Read the article

• Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 1

  - by rajbk

  The Open Data Protocol, referred to as OData, is a new data-sharing standard that breaks down silos and fosters an interoperative ecosystem for data consumers (clients) and producers (services) that is far more powerful than currently possible. It enables more applications to make sense of a broader set of data, and helps every data service and client add value to the whole ecosystem. WCF Data Services (previously known as ADO.NET Data Services), then, was the first Microsoft technology to support the Open Data Protocol in Visual Studio 2008 SP1. It provides developers with client libraries for .NET, Silverlight, AJAX, PHP and Java. Microsoft now also supports OData in SQL Server 2008 R2, Windows Azure Storage, Excel 2010 (through PowerPivot), and SharePoint 2010. Many other other applications in the works. * This post walks you through how to create an OData feed, define a shape for the data and pre-filter the data using Visual Studio 2010, WCF Data Services and the Entity Framework. A sample project is attached at the bottom of Part 2 of this post. Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 2 Create the Web Application File –› New –› Project, Select “ASP.NET Empty Web Application” Add the Entity Data Model Right click on the Web Application in the Solution Explorer and select “Add New Item..” Select “ADO.NET Entity Data Model” under "Data”. Name the Model “Northwind” and click “Add”.   In the “Choose Model Contents”, select “Generate Model From Database” and click “Next”   Define a connection to your database containing the Northwind database in the next screen. We are going to expose the Products table through our OData feed. Select “Products” in the “Choose your Database Object” screen.   Click “Finish”. We are done creating our Entity Data Model. Save the Northwind.edmx file created. Add the WCF Data Service Right click on the Web Application in the Solution Explorer and select “Add New Item..” Select “WCF Data Service” from the list and call the service “DataService” (creative, huh?). Click “Add”.   Enable Access to the Data Service Open the DataService.svc.cs class. The class is well commented and instructs us on the next steps. public class DataService : DataService< /* TODO: put your data source class name here */ > { // This method is called only once to initialize service-wide policies. public static void InitializeService(DataServiceConfiguration config) { // TODO: set rules to indicate which entity sets and service operations are visible, updatable, etc. // Examples: // config.SetEntitySetAccessRule("MyEntityset", EntitySetRights.AllRead); // config.SetServiceOperationAccessRule("MyServiceOperation", ServiceOperationRights.All); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } Replace the comment that starts with “/* TODO:” with “NorthwindEntities” (the entity container name of the Model we created earlier).  WCF Data Services is initially locked down by default, FTW! No data is exposed without you explicitly setting it. You have explicitly specify which Entity sets you wish to expose and what rights are allowed by using the SetEntitySetAccessRule. The SetServiceOperationAccessRule on the other hand sets rules for a specified operation. Let us define an access rule to expose the Products Entity we created earlier. We use the EnititySetRights.AllRead since we want to give read only access. Our modified code is shown below. public class DataService : DataService<NorthwindEntities> { public static void InitializeService(DataServiceConfiguration config) { config.SetEntitySetAccessRule("Products", EntitySetRights.AllRead); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } We are done setting up our ODataFeed! Compile your project. Right click on DataService.svc and select “View in Browser” to see the OData feed. To view the feed in IE, you must make sure that "Feed Reading View" is turned off. You set this under Tools -› Internet Options -› Content tab.   If you navigate to “Products”, you should see the Products feed. Note also that URIs are case sensitive. ie. Products work but products doesn’t.   Filtering our data OData has a set of system query operations you can use to perform common operations against data exposed by the model. For example, to see only Products in CategoryID 2, we can use the following request: /DataService.svc/Products?$filter=CategoryID eq 2 At the time of this writing, supported operations are $orderby, $top, $skip, $filter, $expand, $format†, $select, $inlinecount. Pre-filtering our data using Query Interceptors The Product feed currently returns all Products. We want to change that so that it contains only Products that have not been discontinued. WCF introduces the concept of interceptors which allows us to inject custom validation/policy logic into the request/response pipeline of a WCF data service. We will use a QueryInterceptor to pre-filter the data so that it returns only Products that are not discontinued. To create a QueryInterceptor, write a method that returns an Expression<Func<T, bool>> and mark it with the QueryInterceptor attribute as shown below. [QueryInterceptor("Products")] public Expression<Func<Product, bool>> OnReadProducts() { return o => o.Discontinued == false; } Viewing the feed after compilation will only show products that have not been discontinued. We also confirm this by looking at the WHERE clause in the SQL generated by the entity framework. SELECT [Extent1].[ProductID] AS [ProductID], ... ... [Extent1].[Discontinued] AS [Discontinued] FROM [dbo].[Products] AS [Extent1] WHERE 0 = [Extent1].[Discontinued] Other examples of Query/Change interceptors can be seen here including an example to filter data based on the identity of the authenticated user. We are done pre-filtering our data. In the next part of this post, we will see how to shape our data. Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 2 Foot Notes * http://msdn.microsoft.com/en-us/data/aa937697.aspx † $format did not work for me. The way to get a Json response is to include the following in the  request header “Accept: application/json, text/javascript, */*” when making the request. This is easily done with most JavaScript libraries.

  Read the article

• Enhanced REST Support in Oracle Service Bus 11gR1

  - by jeff.x.davies

  In a previous entry on REST and Oracle Service Bus (see http://blogs.oracle.com/jeffdavies/2009/06/restful_services_with_oracle_s_1.html) I encoded the REST query string really as part of the relative URL. For example, consider the following URI: http://localhost:7001/SimpleREST/Products/id=1234 Now, technically there is nothing wrong with this approach. However, it is generally more common to encode the search parameters into the query string. Take a look at the following URI that shows this principle http://localhost:7001/SimpleREST/Products?id=1234 At first blush this appears to be a trivial change. However, this approach is more intuitive, especially if you are passing in multiple parameters. For example: http://localhost:7001/SimpleREST/Products?cat=electronics&subcat=television&mfg=sony The above URI is obviously used to retrieve a list of televisions made by Sony. In prior versions of OSB (before 11gR1PS3), parsing the query string of a URI was more difficult than in the current release. In 11gR1PS3 it is now much easier to parse the query strings, which in turn makes developing REST services in OSB even easier. In this blog entry, we will re-implement the REST-ful Products services using query strings for passing parameter information. Lets begin with the implementation of the Products REST service. This service is implemented in the Products.proxy file of the project. Lets begin with the overall structure of the service, as shown in the following screenshot. This is a common pattern for REST services in the Oracle Service Bus. You implement different flows for each of the HTTP verbs that you want your service to support. Lets take a look at how the GET verb is implemented. This is the path that is taken of you were to point your browser to: http://localhost:7001/SimpleREST/Products/id=1234 There is an Assign action in the request pipeline that shows how to extract a query parameter. Here is the expression that is used to extract the id parameter: $inbound/ctx:transport/ctx:request/http:query-parameters/http:parameter[@name="id"]/@value The Assign action that stores the value into an OSB variable named id. Using this type of XPath statement you can query for any variables by name, without regard to their order in the parameter list. The Log statement is there simply to provided some debugging info in the OSB server console. The response pipeline contains a Replace action that constructs the response document for our rest service. Most of the response data is static, but the ID field that is returned is set based upon the query-parameter that was passed into the REST proxy. Testing the REST service with a browser is very simple. Just point it to the URL I showed you earlier. However, the browser is really only good for testing simple GET services. The OSB Test Console provides a much more robust environment for testing REST services, no matter which HTTP verb is used. Lets see how to use the Test Console to test this GET service. Open the OSB we console (http://localhost:7001/sbconsole) and log in as the administrator. Click on the Test Console icon (the little "bug") next to the Products proxy service in the SimpleREST project. This will bring up the Test Console browser window. Unlike SOAP services, we don't need to do much work in the request document because all of our request information will be encoded into the URI of the service itself. Belore the Request Document section of the Test Console is the Transport section. Expand that section and modify the query-parameters and http-method fields as shown in the next screenshot. By default, the query-parameters field will have the tags already defined. You just need to add a tag for each parameter you want to pass into the service. For out purposes with this particular call, you'd set the quer-parameters field as follows: <tp:parameter name="id" value="1234" /> </tp:query-parameters> Now you are ready to push the Execute button to see the results of the call. That covers the process for parsing query parameters using OSB. However, what if you have an OSB proxy service that needs to consume a REST-ful service? How do you tell OSB to pass the query parameters to the external service? In the sample code you will see a 2nd proxy service called CallREST. It invokes the Products proxy service in exactly the same way it would invoke any REST service. Our CallREST proxy service is defined as a SOAP service. This help to demonstrate OSBs ability to mediate between service consumers and service providers, decreasing the level of coupling between them. If you examine the message flow for the CallREST proxy service, you'll see that it uses an Operational branch to isolate processing logic for each operation that is defined by the SOAP service. We will focus on the getProductDetail branch, that calls the Products REST service using the HTTP GET verb. Expand the getProduct pipeline and the stage node that it contains. There is a single Assign statement that simply extracts the productID from the SOA request and stores it in a local OSB variable. Nothing suprising here. The real work (and the real learning) occurs in the Route node below the pipeline. The first thing to learn is that you need to use a route node when calling REST services, not a Service Callout or a Publish action. That's because only the Routing action has access to the $oubound variable, especially when invoking a business service. The Routing action contains 3 Insert actions. The first Insert action shows how to specify the HTTP verb as a GET. The second insert action simply inserts the XML node into the request. This element does not exist in the request by default, so we need to add it manually. Now that we have the element defined in our outbound request, we can fill it with the parameters that we want to send to the REST service. In the following screenshot you can see how we define the id parameter based on the productID value we extracted earlier from the SOAP request document. That expression will look for the parameter that has the name id and extract its value. That's all there is to it. You now know how to take full advantage of the query parameter parsing capability of the Oracle Service Bus 11gR1PS2. Download the sample source code here: rest2_sbconfig.jar Ubuntu and the OSB Test Console You will get an error when you try to use the Test Console with the Oracle Service Bus, using Ubuntu (or likely a number of other Linux distros also). The error (shown below) will state that the Test Console service is not running. The fix for this problem is quite simple. Open up the WebLogic Server administrator console (usually running at http://localhost:7001/console). In the Domain Structure window on the left side of the console, select the Servers entry under the Environment heading. The select the Admin Server entry in the main window of the console. By default, you should be viewing the Configuration tabe and the General sub tab in the main window. Look for the Listen Address field. By default it is blank, which means it is listening on all interfaces. For some reason Ubuntu doesn't like this. So enter a value like localhost or the specific IP address or DNS name for your server (usually its just localhost in development envirionments). Save your changes and restart the server. Your Test Console will now work correctly.

  Read the article

• This Week in Geek History: NORAD Tracks Santa, First HTTP Test, Babbage’s Birthday

  - by Jason Fitzpatrick

  History trivia shouldn’t be limited to just treaty dates and wars ending, we’re marking off major milestones in geek history—one week at at time. This week in history we’ve got Santa on the Cold War radar, baby HTTP going for a spin, and Babbage’s birth to help usher in the age of computers. Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? An Alternate Star Wars Christmas Special [Video] Sunset in a Tropical Paradise Wallpaper Natural Wood Grain Icons for Your Desktop and App Launcher Docks My Blackberry Is Not Working! The Apple Too?! [Funny Video] Hidden Tracks Your Stolen Mac; Free Until End of January Why the Other Checkout Line Always Moves Faster

  Read the article

• Guest Post: Christian Finn: Is Facebook About to Become a Victim of its Own Success?

  - by Michael Snow

  12.00 Print 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Cambria; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;}  Since we have a number of new members of the WebCenter Evangelist team - I thought it would be appropriate to close the week with the newest hire and leader of the global WebCenter Evangelists, Christian Finn, who has just joined the Red team after many years with the small technology company up in Redmond, WA. He gave an intro to himself in an earlier post this morning but his post below is a great example of how customer engagement takes on a life of its own in our global online connected and social digital ecosystem. Is Facebook About to Become a Victim of its Own Success? What if I told you that your brand could advertise so successfully, you wouldn’t have to pay for the ads? A recent campaign by Ford Motor Company for the Ford Focus featuring Doug the spokespuppet (I am not making this up) did just that—and it raises some interesting issues for marketers and social media alike in the brave new world of customer engagement that is the Social Web. Allow me to elaborate. An article in the Wall Street Journal last week—“Big Brands Like Facebook, But They Don’t Like to Pay” tells the story of Ford’s recently concluded online campaign for the 2012 Ford Focus. (Ford, by the way, under the leadership of people such as Scott Monty, has been a pioneer of effective social campaigns.) The centerpiece of the campaign was the aforementioned Doug, who appeared as a character on Facebook in videos and via chat. (If you are not familiar with Doug, you can see him in action here, and read the WSJ story here.) You may be thinking puppet ads are a sign of Internet Bubble 2.0 and want to stop now, but bear with me. The Journal reported that Ford spent about $95M on its overall Ford Focus campaign, with TV accounting for over $60M of that spend. The Internet buy for the campaign was just over $10M, which included ad buys to drive traffic to Facebook for people to meet and ‘Like’ Doug and some amount on Facebook ads, too, to promote Doug and by extension, the Ford Focus. So far, a fairly straightforward consumer marketing story in the Internet Era. Yet here’s the curious thing: once Doug reached 10,000 fans on Facebook, Ford stopped paying for Facebook ads. Doug had gone viral with people sharing his videos with one another; once critical mass was reached there was no need to buy more ads on Facebook. Doug went on to be Liked by over 43,000 people, and 61% of his fans said they would be more likely to consider buying a Focus. According to the article, Ford says Focus sales are up this year—and increasing sales is every marketer’s goal. And so in effect, Ford found its Facebook campaign so successful that it could stop paying for it, instead letting its target consumers communicate its messages for fun—and for free. Not only did they get a 3X increase in fans beyond their paid campaign, they had thousands of customers sharing their messages in video form for months. Since free advertising is the Holy Grail of marketing both old and new-- and it appears social networks have an advantage in generating that buzz—it seems reasonable to ask: what would happen to brands’ advertising strategies—and the media they use to engage customers, if this success were repeated at scale? It seems logical to conclude that, at least initially, more ad dollars would be spent with social networks like Facebook as brands attempt to replicate Ford’s success. Certainly Facebook ad revenues are on the rise—eMarketer expects Facebook’s ad revenues to quintuple by 2012 compared with 2009 levels, to nearly 2.9B. That’s bad news for TV and the already battered print media and good news for Facebook. But perhaps not so over the longer run. With TV buys, you have to keep paying to generate impressions. If Doug the spokespuppet is any guide, however, that may not be true for social media campaigns. After an initial outlay, if a social campaign takes off, the audience will generate more impressions on its own. Thus a social medium like Facebook could be the victim of its own success when it comes to ad revenue. It may be there is an inherent limiting factor in the ad spend they can capture, as exemplified by Ford’s experience with Dough and the Focus. And brands may spend much less overall on advertising, with as good or better results, than they ever have in the past. How will these trends evolve? Can brands create social campaigns that repeat Ford’s formula for the Focus with effective results? Can social networks find ways to capture more spend and overcome their potential tendency to make further spend unnecessary? And will consumers become tired and insulated from social campaigns, much as they have to traditional advertising channels? These are the questions CMOs and Facebook execs alike will be asking themselves in the brave new world of customer engagement. As always, your thoughts and comments are most welcome.

  Read the article

• New <%: %> Syntax for HTML Encoding Output in ASP.NET 4 (and ASP.NET MVC 2)

  - by ScottGu

  [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] This is the nineteenth in a series of blog posts I’m doing on the upcoming VS 2010 and .NET 4 release. Today’s post covers a small, but very useful, new syntax feature being introduced with ASP.NET 4 – which is the ability to automatically HTML encode output within code nuggets.  This helps protect your applications and sites against cross-site script injection (XSS) and HTML injection attacks, and enables you to do so using a nice concise syntax. HTML Encoding Cross-site script injection (XSS) and HTML encoding attacks are two of the most common security issues that plague web-sites and applications.  They occur when hackers find a way to inject client-side script or HTML markup into web-pages that are then viewed by other visitors to a site.  This can be used to both vandalize a site, as well as enable hackers to run client-script code that steals cookie data and/or exploits a user’s identity on a site to do bad things. One way to help mitigate against cross-site scripting attacks is to make sure that rendered output is HTML encoded within a page.  This helps ensures that any content that might have been input/modified by an end-user cannot be output back onto a page containing tags like <script> or <img> elements.  ASP.NET applications (especially those using ASP.NET MVC) often rely on using <%= %> code-nugget expressions to render output.  Developers today often use the Server.HtmlEncode() or HttpUtility.Encode() helper methods within these expressions to HTML encode the output before it is rendered.  This can be done using code like below: While this works fine, there are two downsides of it: It is a little verbose Developers often forget to call the HtmlEncode method New <%: %> Code Nugget Syntax With ASP.NET 4 we are introducing a new code expression syntax (<%:  %>) that renders output like <%= %> blocks do – but which also automatically HTML encodes it before doing so.  This eliminates the need to explicitly HTML encode content like we did in the example above.  Instead you can just write the more concise code below to accomplish the same thing: We chose the <%: %> syntax so that it would be easy to quickly replace existing instances of <%= %> code blocks.  It also enables you to easily search your code-base for <%= %> elements to find and verify any cases where you are not using HTML encoding within your application to ensure that you have the correct behavior. Avoiding Double Encoding While HTML encoding content is often a good best practice, there are times when the content you are outputting is meant to be HTML or is already encoded – in which case you don’t want to HTML encode it again.  ASP.NET 4 introduces a new IHtmlString interface (along with a concrete implementation: HtmlString) that you can implement on types to indicate that its value is already properly encoded (or otherwise examined) for displaying as HTML, and that therefore the value should not be HTML-encoded again.  The <%: %> code-nugget syntax checks for the presence of the IHtmlString interface and will not HTML encode the output of the code expression if its value implements this interface.  This allows developers to avoid having to decide on a per-case basis whether to use <%= %> or <%: %> code-nuggets.  Instead you can always use <%: %> code nuggets, and then have any properties or data-types that are already HTML encoded implement the IHtmlString interface. Using ASP.NET MVC HTML Helper Methods with <%: %> For a practical example of where this HTML encoding escape mechanism is useful, consider scenarios where you use HTML helper methods with ASP.NET MVC.  These helper methods typically return HTML.  For example: the Html.TextBox() helper method returns markup like <input type=”text”/>.  With ASP.NET MVC 2 these helper methods now by default return HtmlString types – which indicates that the returned string content is safe for rendering and should not be encoded by <%: %> nuggets.  This allows you to use these methods within both <%= %> code nugget blocks: As well as within <%: %> code nugget blocks: In both cases above the HTML content returned from the helper method will be rendered to the client as HTML – and the <%: %> code nugget will avoid double-encoding it. This enables you to default to always using <%: %> code nuggets instead of <%= %> code blocks within your applications.  If you want to be really hardcore you can even create a build rule that searches your application looking for <%= %> usages and flags any cases it finds as an error to enforce that HTML encoding always takes place. Scaffolding ASP.NET MVC 2 Views When you use VS 2010 (or the free Visual Web Developer 2010 Express) you’ll find that the views that are scaffolded using the “Add View” dialog now by default always use <%: %> blocks when outputting any content.  For example, below I’ve scaffolded a simple “Edit” view for an article object.  Note the three usages of <%: %> code nuggets for the label, textbox, and validation message (all output with HTML helper methods): Summary The new <%: %> syntax provides a concise way to automatically HTML encode content and then render it as output.  It allows you to make your code a little less verbose, and to easily check/verify that you are always HTML encoding content throughout your site.  This can help protect your applications against cross-site script injection (XSS) and HTML injection attacks.  Hope this helps, Scott

  Read the article

• The Beginner’s Guide to Pidgin, the Universal Messaging Client

  - by Zainul Franciscus

  If you find chatting with multiple chat clients troublesome, then Pidgin is the tool for you. In today’s article, we’ll show you how to connect to popular chat networks, encrypt your conversations, and render mathematical formula in Pidgin Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Natural Wood Grain Icons for Your Desktop and App Launcher Docks My Blackberry Is Not Working! The Apple Too?! [Funny Video] Hidden Tracks Your Stolen Mac; Free Until End of January Why the Other Checkout Line Always Moves Faster World of Warcraft Theme for Windows 7 Ubuntu Font Family Now Available for Download

  Read the article

• Alien deletes .deb when converting from .rpm

  - by Andre

  I'm trying to convert .rpm to .deb using alien. sudo alien -k libtetra-1.0.0-2.i386.rpm Alien says that: libtetra-1.0.0-2.i386.deb generated But when I check the folder - there is just original .rpm and no .deb. Also - I can see that for a split second there is a .deb file in a folder. so it looks like alien create .deb and deletes it right away. I suspect that it's maybe because I run 64 bit os and package is 32? Can somebody explain why alien deletes .deb automatically? Verbose output: LANG=C rpm -qp --queryformat %{NAME} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{VERSION} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{RELEASE} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{ARCH} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{CHANGELOGTEXT} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{SUMMARY} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{DESCRIPTION} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{PREFIXES} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{POSTIN} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{POSTUN} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{PREUN} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{LICENSE} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{PREIN} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qcp libtetra-1.0.0-2.i386.rpm rpm -qpi libtetra-1.0.0-2.i386.rpm LANG=C rpm -qpl libtetra-1.0.0-2.i386.rpm mkdir libtetra-1.0.0 chmod 755 libtetra-1.0.0 rpm2cpio libtetra-1.0.0-2.i386.rpm | lzma -t -q > /dev/null 2>&1 rpm2cpio libtetra-1.0.0-2.i386.rpm | (cd libtetra-1.0.0; cpio --extract --make-directories --no-absolute-filenames --preserve-modification-time) 2>&1 chmod 755 libtetra-1.0.0/./ chmod 755 libtetra-1.0.0/./usr chmod 755 libtetra-1.0.0/./usr/lib chown 0:0 libtetra-1.0.0//usr/lib/libtetra.so.1.0.0 chmod 755 libtetra-1.0.0//usr/lib/libtetra.so.1.0.0 mkdir libtetra-1.0.0/debian date -R date -R chmod 755 libtetra-1.0.0/debian/rules debian/rules binary 2>&1 libtetra_1.0.0-3_i386.deb generated find libtetra-1.0.0 -type d -exec chmod 755 {} ; rm -rf libtetra-1.0.0 Very Verbose output LANG=C rpm -qp --queryformat %{NAME} libtetra-1.0.0-2.i386.rpm libtetra LANG=C rpm -qp --queryformat %{VERSION} libtetra-1.0.0-2.i386.rpm 1.0.0 LANG=C rpm -qp --queryformat %{RELEASE} libtetra-1.0.0-2.i386.rpm 2 LANG=C rpm -qp --queryformat %{ARCH} libtetra-1.0.0-2.i386.rpm i386 LANG=C rpm -qp --queryformat %{CHANGELOGTEXT} libtetra-1.0.0-2.i386.rpm - First RPM Package LANG=C rpm -qp --queryformat %{SUMMARY} libtetra-1.0.0-2.i386.rpm Panasonic KX-MC6000 series Printer Driver for Linux. LANG=C rpm -qp --queryformat %{DESCRIPTION} libtetra-1.0.0-2.i386.rpm This software is Panasonic KX-MC6000 series Printer Driver for Linux. You can print from applications by using CUPS(Common Unix Printing System) which is the printing system for Linux. Other functions for KX-MC6000 series are not supported by this software. LANG=C rpm -qp --queryformat %{PREFIXES} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qp --queryformat %{POSTIN} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qp --queryformat %{POSTUN} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qp --queryformat %{PREUN} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qp --queryformat %{LICENSE} libtetra-1.0.0-2.i386.rpm GPL and LGPL (Version2) LANG=C rpm -qp --queryformat %{PREIN} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qcp libtetra-1.0.0-2.i386.rpm rpm -qpi libtetra-1.0.0-2.i386.rpm Name : libtetra Relocations: (not relocatable) Version : 1.0.0 Vendor: Panasonic Communications Co., Ltd. Release : 2 Build Date: Tue 27 Apr 2010 05:16:40 AM EDT Install Date: (not installed) Build Host: localhost.localdomain Group : System Environment/Daemons Source RPM: libtetra-1.0.0-2.src.rpm Size : 31808 License: GPL and LGPL (Version2) Signature : (none) URL : http://panasonic.net/pcc/support/fax/world.htm Summary : Panasonic KX-MC6000 series Printer Driver for Linux. Description : This software is Panasonic KX-MC6000 series Printer Driver for Linux. You can print from applications by using CUPS(Common Unix Printing System) which is the printing system for Linux. Other functions for KX-MC6000 series are not supported by this software. LANG=C rpm -qpl libtetra-1.0.0-2.i386.rpm /usr/lib/libtetra.so /usr/lib/libtetra.so.1.0.0 mkdir libtetra-1.0.0 chmod 755 libtetra-1.0.0 rpm2cpio libtetra-1.0.0-2.i386.rpm | lzma -t -q > /dev/null 2>&1 rpm2cpio libtetra-1.0.0-2.i386.rpm | (cd libtetra-1.0.0; cpio --extract --make-directories --no-absolute-filenames --preserve-modification-time) 2>&1 63 blocks chmod 755 libtetra-1.0.0/./ chmod 755 libtetra-1.0.0/./usr chmod 755 libtetra-1.0.0/./usr/lib chown 0:0 libtetra-1.0.0//usr/lib/libtetra.so.1.0.0 chmod 755 libtetra-1.0.0//usr/lib/libtetra.so.1.0.0 mkdir libtetra-1.0.0/debian date -R Mon, 07 Feb 2011 11:03:58 -0500 date -R Mon, 07 Feb 2011 11:03:58 -0500 chmod 755 libtetra-1.0.0/debian/rules debian/rules binary 2>&1 dh_testdir dh_testdir dh_testroot dh_clean -k -d dh_clean: No packages to build. dh_installdirs dh_installdocs dh_installchangelogs find . -maxdepth 1 -mindepth 1 -not -name debian -print0 | \ xargs -0 -r -i cp -a {} debian/ dh_compress dh_makeshlibs dh_installdeb dh_shlibdeps dh_gencontrol dh_md5sums dh_builddeb libtetra_1.0.0-2_i386.deb generated find libtetra-1.0.0 -type d -exec chmod 755 {} ; rm -rf libtetra-1.0.0

  Read the article

• How do I pipe terminal standard output (stdout) to the clipboard?

  - by Insperatus

  For example, Say I want to list the contents of a folder and directly paste them into a chat window for a friend to see. I realize I could do ls > filename.txt to create a file (filename.txt) with those contents; I'd then have to open or print the file and manually select and copy the text block (which can be annoying/tedious.) I clearly could also select and copy the output of ls directly from within the terminal window. It would be much faster/easier to simply pipe standard output to the clipboard. What terminal command allows me to do this?

  Read the article

• How to Search Just the Site You’re Viewing Using Google Search

  - by The Geek

  Have you ever wanted to search the site you’re viewing, but the built-in search box is either hard to find, or doesn’t work very well? Here’s how to add a special keyword bookmark that searches the site you’re viewing using Google’s site: search operator. This technique should work in either Google Chrome or Firefox—in Firefox you’ll want to create a regular bookmark and add the script into the keyword field, and for Google Chrome just follow the steps we’ve provided below Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Simon’s Cat Explores the Christmas Tree! [Video] The Outdoor Lights Scene from National Lampoon’s Christmas Vacation [Video] The Famous Home Alone Pizza Delivery Scene [Classic Video] Chronicles of Narnia: The Voyage of the Dawn Treader Theme for Windows 7 Cardinal and Rabbit Sharing a Tree on a Cold Winter Morning Wallpaper An Alternate Star Wars Christmas Special [Video]

  Read the article

• iPhone Peripherals for Retailers

  - by David Dorf

  I saw RedLaser on the latest "Shopper" iPhone commercial on TV. Works great for consumers, but retailers will be more interested in a true barcode reader from someone like Infinite Peripherals, which also comes with a magstripe reader I previously mentioned the offerings from Square Verifone, and Mophie that allow swiping credit cards with an iPhone as well. So what's next? There's a decent list at WireLust that includes an IR dongle that turns your iPhone into a TV remote, armband monitors for use when exercising, and most recently a NFC/RFID reader. iCarte from Canadian firm Wireless Dynamics looks interesting. This device can be used for NFC payments and for reading RFID tags. The Canon printer I just bought for home has an iPhone app that lets me send iPhone pictures directly to the printer for printing. In that same vein, Seems like retailers could use bluetooth to print receipts on strategically place printers on the floor. I can't wait to see what they come up with for the iPad.

  Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >