Search Results

Search found 17870 results on 715 pages for 'screen resolution'.

Page 272/715 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

• Microsoft mouse screws up my power settings

  - by Patriot

  Running a new computer with Windows 7 and 64-bit OS. Had a wireless Logitech mouse that worked perfectly with this set up. The mouse was old, and the buttons were sticking and causing double clicks, so I bought a new Microsoft Mobile Wireless 3000 mouse to replace it. The new mouse works perfectly, but now my screen saver is disabled and my computer won't go into sleep mode after 15 minutes as per my power setting. If I hook the Logitech mouse back up, screen saver works fine and computer goes to sleep as it should. Am I missing something, or is Microsoft's mouse just junk. Got no software with the new mouse, so no drivers seem available.

  Read the article

• Ubuntu thinks I have two displays

  - by ResidentBiscuit

  When I first installed Ubuntu I noticed that my mouse would flicker a lot, which caused me to investigate. I remembered back when I ran Fedora I had an issue where it thought I had two displays (hp-dv7 4285dx laptop). In Fedora, this didn't cause any issues. In Ubuntu, it causes the mouse the flicker a lot. The fix I've been using is to just go into settings displays and disable the display that doesn't actually exist. The only problem is that this is not permanent. Each time I start up Ubuntu, I have to go back in and disable this display. They're each just titled "Built-in Display", and have the same resolution. My laptop does have two graphics cards: one on-board and one dedicated. I'm not sure if maybe that is causing is an issue? Any guidance towards this would be great. Thanks!

  Read the article

• Radon HD 6870 compatibility with Ubuntu 11.10

  - by mhost

  Does anyone have experience with the XFX Radeon HD 6870 on Ubuntu 11.10? I've googled and the best I could find was someone getting the card to 'work' on linux. Nothing specific about ubuntu and this card. Specifically, I want to be able to use the full 1900x1200 resolution and watch 1080p movies. If yes, was it very complicated to get working? Note: I do not have the card yet, I am debating buying it, but would like to know beforehand because there is a restocking fee if I have to return it. Thanks.

  Read the article

• Unable to start after 13.04 > 13.10 udate

  - by romainl

  At the end of the update process, clicking on the Restart button had no visible effect whatsoever. After waiting 5 to 10 minutes, I decided to reboot the computer manually. Since then, I rebooted a good dozen times (not with the hope that it would work but with the hope of reading the messages) with the same non-result and the same symptoms: I get the ASCII text-on-purple Ubuntu 13.10 . . . . splash screen with these messages: * Restoring resolver state... [OK] * Starting crash report submission daemon [OK] * Starting CUPS printing spooler/server [OK] Everything disappears. The whole process hangs at a purple screen with the mouse cursor right in the middle. At this point, I'm unable to use the mouse and the keyboard. Booting from a 12.04 CD works perfectly, Disk Utility says that all my disks are OK and I can mount my main partition without problems. Something obviously went wrong at the end of the upgrade but I have no idea what. I'd appreciate any pointer. This is the kind of moment where you really think "Next time, I'll separate my /home partition for sure". My machine is an aging but working Dell Inspiron 530 with an Intel Core Duo E2160 processor, 2 GHz of RAM and an ATI Radeon HD3650 video card. Thanks.

  Read the article

• A Duplicate name exists on the network

  - by Adam

  Recently we changed out office IT structure from having a dedicated server to be the DC, a dedicated server for the exchange etc... (Each running Windows Server 2003 R2) Now we have a single server running Windows SBS 2008 and created a new domain (with a different domain name) We then changed every PC so it connected to the new domain and renamed every PC with a new naming structure. After I had done this, we were getting several PCs that would get the following message just before the login screen (Alt+Ctrl+Del Screen) A Duplicate name exists on the network I have checked the ADUC and have removed the trouble PCs from the list and renamed each PC and changed the SID before connecting back onto the domain but still getting this message. I have tried everything that i can think of but still getting the problem. Any help would be greatly appreticated.

  Read the article

• Do you do custom tests/work for a potential employer before the interview?

  - by Chuck Stephanski

  Every shop I've worked at we have followed what I thought was a standard hiring sequence: 1. solicit resumes 2. phone screen applicants we are interested in 3. in person interview 4. in some shops 2nd in person interview (just w/ CEO for example) Most places I apply to follow something along these lines. But some shops want to give me a test or ask me to build something after I send in my resume. They usually say "congratulations, you've made it to stage 2 of our hiring process!" But for all I know they are asking every applicant they get a resume from to do the same thing. This annoys me because it doesn't scale. If I'm applying for a lot of positions I can't spend all my time doing work that potentially can only land me one job. Plus there's no shared dedication to the process. If we do a 45 minute phone screen, that's 45 minutes the company commits to me and 45 minutes I commit to the company in hopes of a potential match. Do you guys have a policy regarding these sorts of things?

  Read the article

• Will search engines ever change to allow longer title and description tags? [closed]

  - by guisasso

  I was just wondering: The standard title length is 64 characters, while meta description tags are 150-160. I was thinking, that it was probably done like that originally because of screen resolutions back in the day, that could not really fit a lot of content. Google still displays search results in a incredible small resolution fixed to the left side of the browser, and it's simplicity is probably what makes it so popular. With websites such as bing, displaying a richer more vivid search experience, in your opinion, will search engines ever change to accept better and longer meta description tags and titles? (I'm asking because we work to accommodate their standards, but what if they change?)

  Read the article

• Resized Ubuntu 14.04 partition will not boot

  - by user292577

  First, a little background info: I intended to install Ubuntu alongside OS X, but I accidentally erased my entire hard drive and was left with Ubuntu alone. Yesterday, I finally tried to create a desperate partition and OS X. I successfully shrank my Ubuntu partition and created ~40 GB of free space. I used gparted to do this. At first I tried to use Internet Recovery to install OS X on the unallocated space I had created, but discovered I couldn't. I went back to gparted and created a FAT partition with that space. I'm pretty sure I actually did this using my Ubuntu partition on my hard drive (the one I had just shrunken), rather than the USB live boot I had used to shrink it. Therefore, at this point, I think my Ubuntu partition was still functioning properly. I went back to internet recovery and used disk utility to turn the FAT partition into a Mac OS Extended (Journaled) [HFS/HFS+] partition. I believe this is probably where the problem occurred. I successfully reinstalled OS X and found it to be fully functioning. However, when I tried to boot back into the Ubuntu partition all I got was a black screen with a little white cursor (it looks similar to a terminal screen/the Mac DFU mode, but I can't type anything into it. Is there anything I can do to repair my Ubuntu partition? If not, can I at least recover the data from it? Thank you for any help.

  Read the article

• RDP windows key jamming

  - by VBwhatnow

  There is a known bug in RDP; if you lock the screen while connected to a computer the computer you are connected to will have its windows key jammed. There are a few work arounds that involve hammering the windows key and re-locking the screen but this isn't a bug I want to put up with anymore. Microsoft has said they wont fix this bug because it's XP specific and they are only working on security bugs now because XP is at end of life. Is there any way I can fix this or am I just going to have to find an alternative remote desktop software.

  Read the article

• Should Starting a Quick Game via Google Game Services be Iterated?

  - by user46727

  I have been following this tutorial for Google Play Game Services. I am a little unclear as to if the room matching algorithm should be looped or not. Can I just initialize this process once and let it time out? Or by iterating through it is it somehow rechecking it? If anyone had the approximate timeout that would be great as well. The problem stems from the fact that even when both phones are signing into the Game Services (at virtually the same time, my friend and I logged in), the room is not registering multiple people. One time my friend's phone even entered the game map, showing that he somehow was able to progress from the room initialization process. Relevant screen update methods which I am starting this matchmaking process: @Override public void update(float deltaTime) { game.options.updateTiles(); if(!isInitiated) { startQuickGame(); } } private void startQuickGame() { // auto-match criteria to invite one random automatch opponent. // You can also specify more opponents (up to 3). if(game.mGoogleClient.isConnected() && !isInitiated) { Bundle am = RoomConfig.createAutoMatchCriteria(1, 3, 0); // build the room config: RoomConfig.Builder roomConfigBuilder = RoomConfig.builder(Network.getInstance()); roomConfigBuilder.setMessageReceivedListener(Network.getInstance()); roomConfigBuilder.setRoomStatusUpdateListener(Network.getInstance()); roomConfigBuilder.setAutoMatchCriteria(am); RoomConfig roomConfig = roomConfigBuilder.build(); // create room: Games.RealTimeMultiplayer.create(game.mGoogleClient, roomConfig); // go to game screen this.mRoom = Network.getInstance().getRoom(); if(this.mRoom != null && this.mRoom.getParticipants().size() >= 2) { game.setScreen(new MultiGameScreen(game, this.mRoom)); isInitiated = true; } } else { game.mGoogleClient.connect(); } }

  Read the article

• Why are prefab customizations being applied to only a single character? [on hold]

  - by m0rgul

  I've built my (networked) game to the point where I have a room, some characters and a character customization screen. In the character customization screen I get to chose gender, chose from three different wardrobe options and assign custom colors to these wardrobe items. Then I use a custom object to store these options, serialize them and store them in PlayerPrefs, then load the next scene and apply them to my chosen character in this scene. Then I go and spawn some more characters, customize them, etc. The problem is that my character is always customized, but all other characters in the scene are default copies of the prefab. The prefabs themselves are a generic male and a generic female, both with three different wardrobes to chose from (they are included in the prefab). When I spawn my character, I go to the saved options in PlayerPrefs, destroy the two discarded wardrobes, apply color to my chosen wardrobe and then spawn the character. How would it be possible to make the other characters also show up in their customized form rather than just the generic prefab (which shows all three wardrobes at the same time)?

  Read the article

• Moved VM doesnt work correctly on my Ubuntu machine

  - by tinny

  Hi I have a Windows 7 VM that I have moved onto my Ubuntu 64bit host machine that is running VMware player 3.1.0. I think the VM was created on a Windows host. The problem I have is that when I login to this VM the screen goes blank and stays that way. The login screen is fine, but the desktop never correctly appears and sort of shows some strange pixelation that is all distorted. Seems like a virtual video card issue? If I boot into safe mode the desktop appears fine. Any ideas? Thanks

  Read the article

• How to revert to "last known good configuration"

  - by Ripley

  Hi Guys. I failed to install ubuntu 10.04 with WUBI, for some reason it's showing me the root partion is not defined. I'm bored to fight with it so I just removed ubuntu in windows. However this installation made my original Windows XP cripple, a normal boot will end up with a blue screen, error code 7E, I'm still able to boot with the 'last known good configuration' tho. My understanding is booting like this will recover things and I'm supposed to be good when reboot, while this is not the case for me, I have to choose the 'boot from last known good configuration' each and every time to work around the blue screen. Could you suggest how could I resolve this? I feel it's foolish having to waste 10 more seconds each time starting the OS.

  Read the article

• How to disable VGA

  - by Bitmap

  If i run lspci | grep VGA I get below output which tells me below VGA cards are present on my computer. 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 08:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) The ES1000 is an onboard card which came with my machine. Do anyone know how to disable this VGA on my machine. The reason for this request is because if I run xrandr I get the output as shown below: xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 50.0* 800x600 51.0 52.0 53.0 680x384 54.0 55.0 640x480 56.0 512x384 57.0 400x300 58.0 320x240 59.0 Which means I am not able to configure nVidia to accept smaller resolution. Thank you.

  Read the article

• Installing nVidia drivers for Quadro FX 880M on 10.10 caused shutdown/startup issues.

  - by Chantz

  So I was facing weird graphics drivers issues due to the default nouveau drivers that came installed with Ubuntu 10.10 hence I installed the latest nVidia graphics drivers & I the weird graphics issues stopped happening. So far so good, but when I tried to shut down the laptop it got stuck at the window with text 15, shutting down... modem-manager: Caught signal 15, shutting down... init: Disconnected from system us init: dbus main process (1107) killed by TERM signal And this happens .everytime.without.fail. I tried updating the kernel and any/all drivers through update manager but it stil happens. Not only this even the startup screen is totally screwed up. It just displays Ubuntu 10.10 in text with 3 dots. But that is acceptable. To power cycle down the laptop each and everytime for shutdown is not cool. Same goes for when I try to restart. Interesting thing is if I try to shutdown the laptop when I am on the login screen it does so without any problems. I googled & many people seem to face the same issue but I couldn't find any silver bullet hoping to find one here.

  Read the article

• Hardware question re Hauppauge WinTV-HVR 900 HD video/tv capture unit used with laptop with HDMI output laptop HDMI connection

  - by Bill

  I've ordered a Hauppauge WinTV-HVR 900 HD video/tv capture unit. It is mainly for use with my HP desktop running Windows 7 Professional, but I will want to use it occasionally with my partner's HP laptop running Vista Home Premium. The latter has an HDMI output which works perfectly with my LG 42" LCD TV, enabling display of BBC iPlayer and other catchup services. Will the live or recorded HD signal from the WinTV-HVR 900 HD connected to the laptop's USB input be output on the laptop's HDMI socket as HD? Come to that, will SD content be output? The reason I ask is that I had a problem with a Pinnacle unit which displayed OK on the laptop's screen but not on the TV screen (which did display all the normal Windows material). I've tried the Hauppage website, but it doesn't even acknowledge the existence of the WinTV-HVR 900 HD!

  Read the article

• Windows 7 - all usb devices go to sleep im idle mode

  - by dvdx

  A strange thing happened after a few updates to the system: Intel rapid storage SSD firmware update Intel Ethernet adapter update GPU Intel update When the computer turns off the screen (after 5 min), an unknown time later, all the USB devices stop working. Sound card Mouse Keybord etc. I can't turn them back on, so I can't wake up the screen or do anything except turn the computer off and back on. I checked my power save profile and all is OK there. I changed in the Device Manager, the Allow USB to sleep in all the hubs. How can I fix this??

  Read the article

• How to disable screens turn off Windows 8.1

  - by Warpzit

  So recently my computer started turning my screen monitors off after a while without activity, if I move the mouse or hit the keyboard they turn back on. I just want them to stay on. My System is windows 8.1 64 bit, I have 2 screens with mini display port and 1 television with hdmi which often is in regular television mode when this issue happens. Now before you jump to conclusions this is what I've tryed: Disabled screen saver Power saving settings to high with following set: Turn of the display: Never Put the computer to sleep: Never Turn off hard disk after: Settings: Never Sleep: Sleep after: Settings: Never Display: Turn off display after: Settings: Never Display: Enable adaptive brightness: Settings: Off Multimedia settings: When sharing media: Settings: Prevent idling to sleep. Any pointers that get me in the right direction will be greatly appreciated.

  Read the article

• Windows always open top left

  - by BobTodd

  I find this a highly annoying "feature" on a wide screen monitor that my mostly used apps - terminal and gedit always open directly under the top-left corner of my screen and I have to drag them to my eye position each and every-time. I have tried installing the CompizConfig Settings Manager and using the feature to position windows centre, but this has had no effect - the force feature here isn't working for me either. I can use e.g. gnome-terminal --geometry=140x50+50+50 for the terminal but this doesn't work for gedit. Any ideas? Thanks

  Read the article

• Dual Monitor in Ubuntu 11.10 is resetting the theme

  - by Mengu

  i'm experiencing a strange problem with dual monitors. when i set the dual monitor via "nvidia settings" and save the setting to xorg.conf, the default unity theme and icons are turning back to gtk default. i also get an error telling me "could not apply the stored configuration for monitors" here is my xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 280.13 (buildd@yellow) Fri Aug 5 12:31:28 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Chi Mei Optoelectronics corp." HorizSync 30.0 - 75.0 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 540M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP: nvidia-auto-select +0+0, CRT: 1680x1050 +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection here is an example of what i'm talking about: http://i.stack.imgur.com/vrlW1.png how can i fix this? thanks in advance.

  Read the article

• Ram not working in dual dynamic paging mode

  - by Robin Agrahari

  My motherboard is Intel D865GVHZ I m using 512 mb ram and recently i purchased a 512 mb ram of same company same speed(333) and same manufacturer. but my pc is not booting in dual dynamic paging mode . It is not at all booting and the screen freezes on windows logo screen at start up. i checked installing individual rams one by one and the pc is working with either of the ram installed individually. But wen i install both the pc is not working. One more point i found is my one ram has 8 chips on both sides while the other ram has 4 chips on both sides. Is that the root of the problem ?? plz help sir. in hope robin

  Read the article

• Nvidia drivers with GeForce 680M problem [closed]

  - by biofermin

  Possible Duplicate: There's an issue with an Alpha/Beta Release of Ubuntu, what should I do? I have a new Alienware M17x which I have installed 64-bit Ubuntu 12.10 (dual boot). I have tried various ways to install the Nvidia drivers for the GeForce GTX 680M (which they claim they are compatible with): from Ubuntu Software Centre (though Additional Drivers fails to detect the card.) using sudo apt-get install nvidia-current downloading the drivers from nvidia and manually installing them (ctrl + alt + F6, sudo service lightdm stop, sudo ./NVIDIA*, sudo reboot) (each with a clean install of Ubuntu) but in all cases, when I reboot after installing nvidia-setings claims that I am not using the driver and should sudo nvidia-xconfig from the terminal, which I do but this has no effect and I am stuck in crappy resolution until I rm /etc/X11/xorg.conf and reboot. The xorg.conf that nvidia-xconfig generates is: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• HDMI & Display Port stopped work on 11.10

  - by dizzy

  After upgraded two laptops to 11.10, HDMI and Display ports stopped to work. Symptoms on each (btw. it used to work with 11.04 on both): laptop Dell Inspiron 1525 (HDMI, Intel GMX 3100): after HDMI cable is plugged in, screen is corrupted (no panel, no icons), system is unresponsive, TV set receives some signal, but only blue screen and some regular ticks can be heard. Unplugging the cable system recovers. No logs were checked. Thinkpad W510 (DisplayPort, NVidia). Simple "Screens" utility does not recognizes TV set, but this is something to do with the differences between Nvidia driver API and the one expected from the utility, as far I could spot on the net. However, using Nvidia-settings, TV is recognized, but cannot be enabled and used. Beside that, touch pad freezes after HDMI2DisplayPort connector is plugged in the laptop (not immediately, but after few seconds - probably after some handshake with the TV set crashes). It is strange that no such bug reports can be found on the net. So, I guess it is something wrong on our laptops only, but would appreciate some hints (i.e. any known changes recently related to HDMI, Display Port, X-Windows, kernel... wherever I should take a look and fix the issue).

  Read the article

• How to recover lost files after an install

  - by Gentry McColm

  I'm a newbie learning along the way. I recently installed a 2nd hdd into my ubuntu box. Have one of about 160g which runs ubuntu 12.04. And the new hdd was 1 tb, used for holding videos. I had set up 2nd drive as ext3 I believe. And set up folders on it to hold the videos. Worked great. Also thought I had set it up for auto mount. I was able to read and write on it. Etc. Computer froze, so had to reboot it. When I did, system would not reboot: hung on the Ubuntu screen with 5 dots. I hit a few buttons and the command screen showed up, indicating that my 2nd hdd would not mount. Stopped up whole system. Tried rebooting, no go. Had to reinstall ubuntu on the 1st hdd. Did not apparently touch the 2nd one. Well, when I got it up and running, my 2nd hdd mounted automatically (yeah!), but now I cannot find my videos I already had on it. I had not put any more than about 30g of videos on it, but now when I read its Properties, it says I'm using about 50g. So, I'm wondering if somewhere in that, buried, are my 17 videos. Any help in recovering this? Thanks!

  Read the article

• Re: # 47209 How to copy an Existing HD to a new one and have it be bootable?

  - by user281151

  Help please! My backup method of choice is to clone my "working" drive to another identical drive. I have 2 windows drives and I clone my working one to the other one once per month. No problem - each will boot if I select it. Now with the lack of future support for XP, I am getting familiar with Ubuntu 14.04 LTS. I have it on one drive and I have a second identical drive that I want to be able to clone it to once/month. Not as necessary to do this with Ubuntu as with windows, I know, but I'm anal. So I have followed #47209 MestreLion's procedure with just the two Ubuntu drives "on line". I.e., boot my "working" drive with Live CD, use Gparted to be sure I know what's what, open terminal and enter and execute the dd command, Go to bed till the clone is done, shut down the computer, disconnect the input/source drive, boot up using BIOS to select the remaining output drive. The drive starts fine but all is not OK. It puts up a screen that says I'm on a Guest Session and asks for a password. Well, for one thing I have my Ubuntu set up to start without a password being entered. I have one, of course, I put it in but it isn't accepted. I can't get by this Guest Session screen. I am fine, of course. I can disconnect this drive, hook up my "main" ubuntu drive and all the rest, and go on with my business. But I don't have the desired "emergency backup" drive working where I could jump on and use it immediately if I needed it. Can someone give me some guidance here?? What (else) do I need to do. Love Ubuntu but learning. Thanks, Wes.

  Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >