Search Results

Search found 62172 results on 2487 pages for 'windows networking'.

Page 272/2487 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

• Windows hangs on startup

  - by Mr_Chimp

  I got in to work this week to find four windows xp computers all having the same problem - they are all hanging on the windows loading screen (the one with the logo and the green progress bar). The only thing I could think that would cause this to happen on all of them at the same time are bad windows updates. Can anyone shed some light? Edit: some further details: CAN get to safe mode. System restore DOESN'T help. HDDs are ok. All were working fine last week.

  Read the article

• DSL PPPoE connection not working?

  - by Mussnoon

  I use a wired PPPoE connection to connect to the Internet. What I need to do on Windows to connect to it is put in static IP address, gateway, subnet mask and DNS servers for my LAN card. Next I have to create a dialer for a PPPoE connection, put in my user name, the service name and the password, and "dial" this connection. And it works fine. On Ubuntu 10.04, however, I have tried setting things up in a similar fashion - put in all static addresses for the "automatic" wired connection, then put in user name, service name, password for a "DSL" connection. It worked for a while, then stopped. I have tried putting in all the details within the DSL configuration dialog, same thing happened - it worked for a while, then stopped. I have tried deleting the ethernet connection and only keeping the DSL one with all the numbers put in place, same thing happened - it worked for a while, then stopped. Each of the times, when it connected, it connected randomly, after trying a few times, and either stopped working within a few minutes, or after I had rebooted. I have deleted and remade the connection dozens of times - even with different names, but nothing seems to be working. I have also tried pppoeconf from the terminal, didn't work. I have checked /var/log/kern.log, but nothing changes in the file when I try to connect. I have also checked /sbin/route, but gedit can't even open it (says it can't figure the character encoding...). The "connection established" notification pops up from the top right corner, the same way as when the computer is actually connected to a network. Can anyone figure what's wrong and how it can be solved?

  Read the article

• DSL connection not working in 10.04

  - by Mussnoon

  I use a wired PPPoE connection to connect to the Internet. What I need to do on Windows to connect to it is put in static IP address, gateway, subnet mask and DNS servers for my LAN card. Next I have to create a dialer for a PPPoE connection, put in my user name, the service name and the password, and "dial" this connection. And it works fine. On Ubuntu 10.04, however, I have tried setting things up in a similar fashion - put in all static addresses for the "automatic" wired connection, then put in user name, service name, password for a "DSL" connection. It worked for a while, then stopped. I have tried putting in all the details within the DSL configuration dialog, same thing happened - it worked for a while, then stopped. I have tried deleting the ethernet connection and only keeping the DSL one with all the numbers put in place, same thing happened - it worked for a while, then stopped. Each of the times, when it connected, it connected randomly, after trying a few times, and either stopped working within a few minutes, or after I had rebooted. I have deleted and remade the connection dozens of times - even with different names, but nothing seems to be working. I have also tried pppoeconf from the terminal, didn't work. I have checked /var/log/kern.log, but nothing changes in the file when I try to connect. I have also checked /sbin/route, but gedit can't even open it (says it can't figure the character encoding...). The "connection established" notification pops up from the top right corner, the same way as when the computer is actually connected to a network. Can anyone figure what's wrong and how it can be solved?

  Read the article

• Huawei E3276 LTE uplink slow in the routing Ubuntu, but not with other devices in the LAN

  - by Mytomi

  I have a Huawei E3276 LTE dongle (12d1:14fe - 12d1:1506) and a problem with the upstream speed. The problem is not only present with Ubuntu 14.04 LTS (64 bit workstation, kernel 3.16), but also with Raspbian Jessie for Raspberry PI (kernel 3.14). Upstream seems to be always limited to 5 Mbit/s whenever I check the speed from the Linux computer that I use as a LTE router. The other computers in the LAN always get about 10-15 Mbit/s upstream, even though the traffic is routed through the same Linux computer suffering from seemingly capped uplink. Downstream speed is always fine, 25 Mbit/s. I even installed Windows 7 in the same computer as Ubuntu and the speeds are 25 Mbit/s down, 15 Mbit/s up. So the problem is not with E3276 device itself or in the mobile subscription, but in the Huawei E3276 Linux compatibility. Maybe something in the kernel? I have made sure that the matter is not with iptables rules: the speed does not noticeably increase when iptables is disabled. Turning off IPv4 forwarding does not improve speed either. I'm not sure what settings and logs do help in debugging the situation. Please ask for more details, if you have a clue what might be wrong. Thanks, Mytomi

  Read the article

• Trouble installing Server 12.10 - Dead keyboard, Blank Screen, Network Config

  - by Mikey

  Installing 12.10 server from cd - minimal installation: basic system, ssh server,postgreSQL, manual updates. Hardware is brand new HP server that also runs Win 2003 Server Standard as a DNC excellently - I installed the grub boot manager on the primary partition and it is working fine - can boot to Win or Ubuntu without issue. Everything seemed to go OK on the installation - BUT when I restarted the system after install and booted to Ubuntu, I got the command prompt for Ubuntu, but the keyboard was UNREPSONSIVE - dead. There is nothing wrong with the keyboard - works fine if I boot to Win. With a completely unrepsonsive keyboard I had to hit the power switch - when I restarted and booted to Ubuntu, Ubuntu started but no command prompt came up at all - just black screen. I powered down and rebooted to advanced Ubuntu options - it tried to reinstall/initliaze a long list of packages - when it got to 'waiting for network configuration' it waited, then a message 'waiting 60 seconds for network configuration'... it waited 60 seconds and then I got a 'failed to configure network message' and it continued. Finally it finished, I hit enter and got to a prompt - but again, keyboard UNREPSONSIVE - dead. I went through this several times - tried 'repairing broken installation' option and also reinstalling entirely - always same results. I am flummoxed. The only clue I have is that for the Windows DNC config, the IP address is static - not via DHCP. But I don't think that should impact Ubuntu at all - perhaps I am mistaken. What is wrong?

  Read the article

• How do I get network working on a Dell n5010 - Ubuntu 10.04

  - by cyberroger

  Hey. I just formatted a Dell n5010 and installed Ubuntu 10.04. Now,when i try to access the Internet it doesn't find the available networks. Informations about it: My network is set to broadcast SSID; Already typed lspci, and it doesnt returns my wireless card; Tried installing windows drivers from fabricant cd usind diswrapper, but it says it cant complete the installation because it cant find some "Device" folder; I don't know what else to do, I switch the wireless button on/off and it just can't see any wireless connection, includin mine. Here are the informations about lspci: *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fbc00000-fbc03fff And this: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 12:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01) 13:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Thanks!

  Read the article

• Windows Phone 7 Series &ndash; First Developer Information

  - by Nikita Polyakov

  The official developer story for Windows Phone 7 Series was finally announced at MIX10. You can review the recording of the Keynote at http://live.visitmix.com, also all the sessions will be available within 24hours of their posting. There is extensive list of presentations for Windows Phone listed here. You can start playing with these tools today! Official Silverlight site for Mobile Development: http://silverlight.net/getstarted/devices/windows-phone/  Channel 9 has a training information here: http://channel9.msdn.com/posts/Learn/Windows-Phone-7-Series-Training/ Ok, and for the ones in the hurry, direct link: Windows Phone Developer Tools CTP                      Here is the overview summary of the announcements: End-to-End Mobile Development Platform: By combining Silverlight for rich internet applications and the XNA Framework for game development, developers and designers will be able to build visually stunning and immersive applications and games on the Windows Phone 7 Series. Free Windows Phone Developer Tools: Microsoft has released a free comprehensive tool support package for Silverlight on Windows Phone 7 Series, available for download. Expression Blend for Windows Phone and a preview of Microsoft Visual Studio 2010 Express for Windows Phone will be also included as part of the download. Windows Phone Marketplace: Microsoft made available a new merchandising tool that will enable developers and designers to bring applications and games to market and increase the discoverability of applications with customers while supporting one-time credit card purchases, mobile operator billing and advertising-funded applications.

  Read the article

• Turning laptop into WAP using netgear WNA1100? (stuck at hostapd)

  - by Vivek Sharma

  I have a Netgear WNA1100 usb wifi adapter. I have installed Atheros driver from Forum Details (btw name of the file is ath9k_htc-installer.1.0.1-maverick-fixed.deb). I wish to make a setup like connectify(windows) on ubuntu, so that I can connect my phone wirelessly to my laptop via Netgear WNA1100 (behaving as AP) and eventually use internet via my wired lan. I have installed the above mentioned driver, hostapd and hostap-utils. Following is my hostapd.conf file. ssid=vks interface=wlan1 # The interface name of the card driver=ath9k_htc # The card driver macaddr_acl=0 accept_mac_file=/etc/hostapd.accept deny_mac_file=/etc/hostapd.deny ieee80211x=1 # Use 802.1X authentication auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=88888888 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP When i run sudo hostapd /etc/hostapd/hostapd.conf I get an error invalid/unknown driver 'ath9k_htc # The card driver I think the driver is installed fine, as i can see the blue led blinking on the netgear adapter, which was not blinking earlier. Can someone please guide me how to achieve this setup? I will appreciate an example hostapd.conf file with a simple wpa_psk security setup. Please be detailed and descriptive with commands. How to run and end it. Following is output from lsmod, i have only pasted the entries which had ath and ath related info. Which driver shall i use. Module Size Used by ath9k_htc 42903 0 ath9k_common 2563 1 ath9k_htc ath9k_hw 285176 2 ath9k_htc,ath9k_common ath 13001 2 ath9k_htc,ath9k_hw cfg80211 139811 3 ath9k_htc,mac80211,ath compat 4020 1 cfg80211 led_class 2633 3 ath9k_htc,thinkpad_acpi,sdhci Thanks.

  Read the article

• Ubuntu 12.04 connected to wireless network but internet not working

  - by A.J.

  I can connect to my house's wireless network just fine, but when I'm connected I can't browse the web. Firefox starts connecting to a site and then just poops out. This doesn't happen on my roommates' computers (running Windows) or on our 3DSes, so I know it's just my laptop. I already tried sudo dhclient -r sudo dhclient sudo ifconfig eth0 down sudo ifconfig eth0 up Results of a few commands I was asked to run in comments: ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. ^C --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (173.194.33.38) 56(84) bytes of data. --- google.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1006ms nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 88:AE:1D:6B:4E:E7 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off - Device: wlan0 [JUSTICE] ----------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: connected Default: yes HW Address: 1C:65:9D:65:C6:31 Capabilities: Speed: 1 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) HOME-9B18: Infra, 00:26:F3:53:9B:18, Freq 2412 MHz, Rate 54 Mb/s, Strength 34 WPA WPA2 cougdad48 Network: Infra, 60:33:4B:E4:C4:5D, Freq 2437 MHz, Rate 54 Mb/s, Strength 22 WPA2 cougdad48 Guest Network: Infra, 66:33:4B:E4:C4:5D, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 WPA2 belkin.ade: Infra, 94:44:52:FF:8A:DE, Freq 2457 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 *JUSTICE: Infra, 00:24:01:7B:9F:7E, Freq 2462 MHz, Rate 54 Mb/s, Strength 88 WEP CenturyLink: Infra, B2:B2:DC:8E:E2:58, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA WPA2 IPv4 Settings: Address: 192.168.0.11 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 (JUSTICE is my home's network.) ping -c 2 198.168.0.1 PING 198.168.0.1 (198.168.0.1) 56(84) bytes of data. --- 198.168.0.1 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms

  Read the article

• How to connect Ethernet on Ubuntu (with auto-detection)

  - by user12285

  It's been well over six months but I have the same router SmartAX MT880d with Ethernet, and the exact same problem : no internet, even though I can successfully reach the modem settings page by entering 192.168.1.1 in Firefox. I'm a total beginner with Ubuntu. My internet works great in Windows but does not work in Ubuntu. Sorry if I don't use the right (technical) terminology to explain my issue. English is not my mother tongue. For 2 weeks, I've been doing reading on the web and forums and the ubuntuguide.org to name a few, but to no avail. Now I see no other solution but to ask for help. My problem is that I can't find a way to put the right digits in the right place because I don't know what numbers I need to put in what files. E.g.: do I need to use DHCP? or a static IP address? No clue whatsoever. I'm concerned that I might put figures in the wrong spaces. For example, is the modem/router's IP exactly 192.168.1.1 for Huawei Smart AXMT880d modem? Is the subnet 255.255.255.0? Gateway 192.168.1.1? I'm confused as I can also see a different IP starting with 155131*** (is it an account number?) on my contract with Huawei (a Chinese ISP). Apart from calling 911, what other numbers do I need to put in and where? How do I check that all the numbers have been entered correctly in every appropriate space before trying to connect the Internet?

  Read the article

• multiple godaddy domains to home router then reverse proxy to multiple internal servers [closed]

  - by Dan

  I need someone to steer me correctly... advising on all required components. I have multiple domains with godaddy, say site1.com , site2.com, site3.net I have multiple home LAMP servers... one on say, lampsrv1 = 192.168.0.2:8080 (windows) and lampsrv2 = 192.168.0.3:9080 (linux srv2) I would like to have server1.site1.com point to lampsrv1 and server2.site1.com point to lampsrv2 . I may also want server1.site2.com also point to my lampsrv1 as an option. My thinking is - I have a dedicated linux srv1 with a reverse proxy server behind the router, ie Apache or NGINX or equivalent directing to appropriate LAMP server. It's the godaddy subdomains, cnames or redirections, etc I'm having a challenge with for starters... I have tested apache with virtual servers but can't get proxying to work based on host header info... seems to go to one address making me think its actually the apache reverse proxying that's not quite working. Finally to add to this, my router has a dynamic IP but does lease for quite a while but that would be my final piece. So, I'm sure this might be a popular question but can't seem to piece this together. I need someone who has actually configured this scenario to advise but will take other suggestions.... please indicate if you have successfully configured this.

  Read the article

• wifi not working hp dv4

  - by Blaze

  i get this output for sudo lshw -C network : *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 06 serial: 3c:4a:92:cd:63:98 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network DISABLED description: Wireless interface product: RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip] vendor: Ralink corp. physical id: 0 bus info: pci@0000:0a:00.0 logical name: wlan0 version: 00 serial: 90:00:4e:82:3c:5b width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.0.0-17-generic-pae firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c2500000-c250ffff i cant enable the wifi using the fn+f12 key.. its just stuck. In windows 7 it gets enabled when i press the same keys. but this happens after it gets booted up... i just want to use the wifi in anyway possible. can anybody help?

  Read the article

• Dirt Cheap Bi-Directional Antenna Wirelessly Extends Your LAN

  - by Jason Fitzpatrick

  If you’re looking for an effective way to link remote LANs without the hassle of laying cable, this DIY bi-directional antenna is a quick (and cheap) method for bringing internet access to outbuildings and other locations. Tinker Danilo Larizza needed to share internet access between apartments that are relatively close together but not hardwired–ruling out simply sharing the access via existing LAN infrastructure. His solution combines a simple scrap wire antenna array mounted inside a plastic food bin (seen here with the cover removed to show the antenna) and some coaxial cable to link the antenna to two routers. Our favorite part about his build is that he constructed the pair to establish if the antenna setup would even work in his location and intended to buy commercial antennas if it did; his Tupperware models worked so well, however, they’re now the permanent solution. Hit up the link below for more information about the project. 2.4 Ghz Directive Biquad Antenna [via Hack A Day] How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

  Read the article

• Yoga Pro 2 Wi-Fi not working

  - by user293004

  I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

  Read the article

• Can't connect to or see my wifi ssid

  - by ant

  Today I installed ubuntu 12.04 on my laptop. I am unable to see my home SSID or even connect to it. I've tried to connect as a hidden SSID but I always get prompted for authorization although my key is correct. I'm in in Europe but my laptop is from US. I'm not sure if that is relevant. I've read around this site and saw something that has to do with setting the channel above 11. I'm not sure I did that correctly I did this : How to use Wi-Fi channels above 11? Did't help. I'm able to connect with cable but not via wifi either windows or linux. Other devices in my home can connect without any issues, even the kindle. Here is the screenshot from my router : Here is some additional info : lspci | grep -i network 08:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) lspci -nnk | grep -A2 0280 08:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Hewlett-Packard Company U98Z062.10 802.11bgn Wireless Half-size Mini PCIe Card [103c:303f] Kernel driver in use: ath9k m-tool NetworkManager Tool State: connected (global) Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: disconnected Default: no HW Address: 90:4C:E5:38:79:0D Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes I'm not sure what to do next. Any suggestions?

  Read the article

• Cannot establish Wired connection on Acer Aspire 5930G

  - by drakos46

  I use an Acer Aspire 5930G, dual booted with Windows 7 and Ubuntu 13.10. My problem is that i cannot establish wired connection on my ubuntu. Wireless connection works in both of my OSs but the Wired connection does not, only on the Ubuntu. I have already tried the common fix: echo on | sudo tee /sys/class/net/eth0/device/power/control but without any results. Any ideas? eth0 Link encap:Ethernet HWaddr 00:1d:72:c2:21:a5 inet6 addr: fe80::21d:72ff:fec2:21a5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:945 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:204318 (204.3 KB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:7241 errors:0 dropped:0 overruns:0 frame:0 TX packets:7241 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:645874 (645.8 KB) TX bytes:645874 (645.8 KB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:57:7b:cc inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::216:eaff:fe57:7bcc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:19937 errors:0 dropped:0 overruns:0 frame:0 TX packets:16933 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10877245 (10.8 MB) TX bytes:3131378 (3.1 MB) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8071 PCI-E Gigabit Ethernet Controller (rev 16)

  Read the article

• Windows Store now open to ALL developers

  - by CSharpZealot

  A little late, but it should be announced here too... Today’s an especially great day to be a developer. We’re very excited to announce the last significant milestone in the rollout of the Windows Store before the general availability of Windows 8 on October 26. The Store is now open for app submissions from all developers – individuals and companies – in our supported markets, and we’ve added 82 more app submission markets! Now, developers from 120 markets can publish Windows Store apps. Ted Dworkin, Partner Program Manager for the Store, authored this post. --Antoine Source: http://blogs.msdn.com/b/windowsstore/archive/2012/09/11/windows-store-now-open-to-all-developers.aspx About two weeks ago the Windows Store was opened and with the upcoming general availability of Windows 8 in October, it seems that it was good timing. In addition to the store being opened, Microsoft also announced that the MSDN, BizSpark and DreamSpark will get a 1-year Windows Store developer account. That's a different tact than what we saw for the Windows Phone 7, where we didn't get that subscription included. We're already seeing new apps showing up faster and faster, so with the addition of 86 more markets we're only going to see more apps than ever available. Since i'm now back on a Windows 8 platform (was out for about a month) I'm going to start blogging more content around the Windows 8 developer experience. Next stop for me...get my hands on a Windows 8 surface device as quickly as possible :) Keep coding!

  Read the article

• both IPV4 and IPV6 at the same time over DSL connection?

  - by namiheike

  Let me describe my situation: while I connect computer with the wire, I've got an IPV6 address automatically, there's a "Wired connection" tab in network manager, and I can access an website that support IPV6 (google,facebook,twitter...)with a hosts file, or use the proxy like google.com.sixxs.org But if I want to access the whole internet, I have to create a DSL connection with username and password that ISP gave me. BUT after I change my connection into this DSL connection, I cannot access website over IPV6, even there's the site's ipv6 address in /etc/hosts, then I realize that I lose my IPV6 connection, because the ping6 says connect: Network is unreachable. the problem is, there's no IPV6 tab or options about IPV6 in the configure of DSL connection. It feels like I can only use one connection at the same time, but the DSL doesn't support IPV6 and the wired connection doesn't support IPV4(I mean, there's no way to input the password the ISP gave me) maybe make somebody uncomfortable, but when I work in MS windows, there's no such problem, (maybe just feel like) I can access V4 and V6 at the same time. So how to solve with this? thanks a lot. I'm in 11.10 + gnome3

  Read the article

• Wired connection problem through router

  - by tommypincha

  I'm having trouble to connect my Ubuntu 11.10 to internet through ethernet. I installed a router to get Wi-Fi and now (by a wired connection) I can't have internet with ubuntu (but I can with Windows 7). I see several attempts per minute of the network-manager to get a connection, but after a minute it stops trying. Here are a couple of outputs from key files: cat /etc/network/interfaces auto lo iface lo inet loopback and ifconfig -a eth0 Link encap:Ethernet HWaddr 00:16:76:e4:a6:e8 inet6 addr: fe80::216:76ff:fee4:a6e8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:117 dropped:0 overruns:0 frame:117 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:12221 (12.2 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:582 errors:0 dropped:0 overruns:0 frame:0 TX packets:582 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:46024 (46.0 KB) TX bytes:46024 (46.0 KB) I tried reconnecting the modem and the router and reconnecting the ethernet cable but nothing... I tried other solutions from other posts (this one has a similar issue Wired connection not working) but again nothing. My IP is dynamic. A couple of things I see and did: I see no inet addr, only inet6. I ignored ipv6 from the internet connections, and restarted the network-manager service and nothing. A difference with the post I mentioned is the RX packets with errors I have, is this a clue of the problem? Any help would be appreciated, Thanks!

  Read the article

• Would a typical corporate firewall block a Java applet having the following behaviour

  - by auser

  I'm thinking of developing a proxy-like program to forward ports on a remote PC to a local PC (for example SSH). Assume that both local and remote PCs are running behind typical firewalls (i.e. consumer broadband router firewall, Windows firewall or corporate firewalls). The program will be a Java program which the user will run on both the remote and local PC. The remote client will periodically poll a central server to determine whether there are pending client connections. A session could be initiated as follows: The local client contacts the central server and request the current connection details for a specific remote client. The central server responds with the remote server's last received IP address and port. The next time the remote server polls the central server, the client's IP address and port are returned. The remote server initiates a connection to the local client using the IP address and port returned by the central server and listens for a response on a random port. The remote server will pass the value of the port it's listening on to central server. Goto 1, if client fails to connect to server. Would this work or will a typical firewall block the interactions.

  Read the article

• Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick

  - by user1622959

  A short time after accessing the internet, the browser/download times out. Before the timeout, the internet works OK briefly; afterwards, the wireless is still connected with a strong signal, but every internet access results in a timeout. When I leave the PC for a while, the internet is back just to timeout again as soon as I start using it. The same happens when I reconnect to the router. Also, when I surf the internet, it takes a couple of minutes until the timeout, but when I download something, it times out in a matter of seconds. The wireless adapter works just fine in Windows and internet via ethernet cable works just fine in Ubuntu. Does anyone have the same problem or knows a solution. I use Ubuntu 12.10 x64. The problem occurs since I installed ubuntu (which was a few days ago). Here some stuff that might be usefull: serus@serus-Ubuntu-PC:~$ lsusb Bus 002 Device 002: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170] serus@serus-Ubuntu-PC:~$ lsmod Module Size Used by carl9170 82083 0 serus@serus-Ubuntu-PC:~$ modinfo carl9170 filename: /lib/modules/3.5.0-21- generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko alias: arusb_lnx alias: ar9170usb firmware: carl9170-1.fw description: Atheros AR9170 802.11n USB wireless serus@serus-Ubuntu-PC:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"virginmedia0137463" Mode:Managed Frequency:2.462 GHz Access Point: A0:21:B7:F8:29:B6 Bit Rate=240 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1399 Invalid misc:18 Missed beacon:0 serus@serus-Ubuntu-PC:~$ sudo lshw -C network *-network description: Wireless interface physical id: 1 bus info: usb@2:2 logical name: wlan0 serial: 00:27:19:bb:00:19 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.5.0-21-generic firmware=1.9.4 ip=192.168.0.6 link=yes multicast=yes wireless=IEEE 802.11bgn

  Read the article

• How to get Wifi Working Properly - I am Noob

  - by user287853

  I'm a noob to Ubuntu, but not computers. I installed a full version of Ubuntu version 12 whatever it is. I run it on a machine that has Win7/Win8 on another hard drive. My wireless adapter is some tiny USB stick I got on eBay - it works great in Windows, but I can't get it to work in Ubuntu. More precisely, Ubuntu is providing me a list (sometimes) of wireless networks in the area and when I try to connect to mine it just keeps password prompting me even though the one I use is correct. I looked over all the settings multiple times and don't believe there is anything in error regarding what it takes to connect to my network. So, I thought maybe it is a driver issue and came across NDIS. I thought I should try installing it, but I don't know how when I can't connect the Ubuntu machine to the Internet. I tried some commands to no avail. I have the Ubuntu installation disc and it shows a NDIS common and utils .deb files in there. Can someone out there help me out to get this wireless setup so I can get online?

  Read the article

• My internet connection slows or dies unexpectedly

  - by genesis

  I installed Ubuntu 10.04 once again and I'm having some problems which I had before, but I have no idea how I solved them. On Windows, everything's working fine and I had no problems with this. My problem is that sometimes, when browsing through the internet, webpages just start to load really slow, sometimes it doesn't load anything at all (Error 118 (net::ERR_CONNECTION_TIMED_OUT): The operation timed out.) and it starts to work after few minutes. My IPv4 settings are automatic (DHCP), and IPv6 settings are Ignored/Disabled. I think my previous problems had something to do with IPv6, but I'm not sure. Is there a fix for this? iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Fsite1" Mode:Managed Frequency:2.442 GHz Access Point: C8:3A:35:40:43:68 Bit Rate=0 kb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=43/70 Signal level=-67 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

  Read the article

• Internet slow on one router only [the problem only in Ubuntu] [on hold]

  - by mrSuperEvening

  Internet works perfectly on every other router, but browsing sucks at home (slow browsing and slow loading times). I changed DNS servers to 8.8.0.0, still doesn't help. And funnily, download speed is extremely high on this network (meaning torrents for example), but using browsers and loading websites is extremely slow (only on this network). Do I need to change something in router settings or what can I try? By the way, I use wired connection to router. EDIT: There's no problems when using Windows. EDIT: ifconfig: eth0 Link encap:Ethernet HWaddr f2:4d:a0:c0:3f:4c inet addr:192.168.11.8 Bcast:192.168.11.255 Mask:255.255.255.0 inet6 addr: fe80::f24d:a2ff:fec6:3f4c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:206798 errors:0 dropped:0 overruns:0 frame:0 TX packets:219570 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:76680734 (76.6 MB) TX bytes:21738160 (21.7 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:160 errors:0 dropped:0 overruns:0 frame:0 TX packets:160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11094 (11.0 KB) TX bytes:11094 (11.0 KB)` ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (213.159.32.147) 56(84) bytes of data. 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=1 ttl=61 time=0.936 ms 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=2 ttl=61 time=0.937 ms --- google.com ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 0.936/0.936/0.937/0.030 ms

  Read the article

• How to connect MTS MBlaze on ubuntu 11.04

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >