Search Results

Search found 8876 results on 356 pages for 'hardware raid'.

Page 273/356 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

• How to start a high school Java/Android development club for 13-17 year olds

  - by PaulHurleyuk

  My wife is a high school maths teacher, and is considering starting a programming club for 13-17 years olds who show an interest. Their interest seems to be around Apps and Android which I have little experience of. The kids would be (presumably) interested in programming, and have a fairly high level of computing knowledge. We would provide them with resources and some knowledge, but hopefully a lot would be self guided. I'm hoping stack overflow'ers can provide some tips or starting points. Specific things I think I'll need are; A development Environment; Currently I'm looking towards Java and Android, developed in Eclipse, probably installed on donated older hardware Some initial direction; There seem to be a plethora or 'start android' tutorials, so some recommendations for good ones are valuable, as are recommended paper books A Target; Some final project they should be shooting for A Route; This is where I'm most stuck, how to lead them through the required Java concepts and learning they would need Some related questions already out there Language+IDE for teaching high school students? Teaching "web design/development" to high-school home-school group. Good sources? How can I bootstrap a software development community at my school?

  Read the article

• System in low-graphics mode

  - by Artem Moskalev

  I am totally new to Linux, and Ubuntu. I bought ASUS X53E Notebook, erased Windows and installed Ubuntu. First it worked ok. Then when I started working with it, i opened the terminal, entered sudo chmod 666 usr and then all the icons from the main panel disappeared + the whole system stopped responding. I decided to restart the system. When restarted, a message appears: the system is running in low graphics mode and below it: Your screen, graphics card and input device setting could not be detected correctly. You will need to configure it yourself. But the "OK" button is disabled and if I press any buttons nothing happens. If I enter Ctrl-Alt-F2 it opens the bash terminal. But there commands sudo or apt-get are not found and it says that permission denied if i try to enter any folder like cd /usr If I enter the su command it asks for the password I don't know. When encountering this problem first, I reinstalled the whole Ubuntu. but today it happened again just the same. What shall I do? maybe there is something wrong with the hardware? If I need to install another distribution of Linux could you recommend one? but I'd rather stick to Debian releases like Ubuntu. so how do I fix the problem? PS: Please give answers in simple terms because am a newbie so i don't know what goes where yet.

  Read the article

• Visual Studio 2010 editor painfully slow

  - by Daniel Gehriger

  I'm running out of patience with MS VisualStudio 2010: I'm working on a solution containing ~50 C++ projects. When using the editor, I experience a lag of 1 - 2 seconds whenever I move the cursor to a different line, or when I move to a different window, or generally when the editor losses and gains focus. I went through a whole series of optimizations, to no avail: installed all hotfixes for VS2010 disabled all add-ins and extensions disabled Intellisense deleted all temporary files created by VS2010 disabled hardware acceleration unloaded all but 15 projects disabled tracking changes closed all but one window and so on. This is on a Dual Core machine with SSD harddrive (verified throughput 100MB/s), enough free space on HD, Windows 7 Pro 32-bit with 3GB of RAM and most of it still free. Whenever I type a letter, CPU usage of devenv.exe goes to 50 - 90% in process monitor for 1 - 2 seconds before returning to 5%. I used Process Explorer to analyze registry and file system access, and I only notice frequent accesses to the .sln file (which is quiet small), and a few registry reads, but nothing that would raise a red flag. I don't have this problem with solutions containing less projects, so I'm inclined to think that it's related to the number of projects. For your information, the entire solution has been migrated over the years from VS2005 to VS2008 to now VS2010. Does anyone have any ideas what else I could do to resume work on this project, other than returning to VS2008?

  Read the article

• Copying photos from camera stalls - how to track down issue?

  - by Hamish Downer

  When I copy files from my camera (connected via USB) to the SSD in my laptop a few files get copied and then the copy stalls. I'm not sure why, any ideas or things to investigate appreciated, or bug reports to go and look at. I have read this answer - the camera (Canon 40D in case that matters) mounts fine using gvfs. I can see the photos in Nautilus, or in the terminal (in /run/user/username/gvfs/... ) and I can copy a few photos, but not many. Using the terminal or Nautilus the process hangs until the camera goes to sleep. Digikam fails to copy any at all, as does Rapid Photo Downloader. Shotwell did manage it in the end, but that is very much a work around for me. I have disabled thumbnail generation by nautilus. Load average stays about 1 while this is happening, while CPU usage is half idle, half wait (and a little user/sys for other programs). None of the programs at the top of the cpu list in top are related to copying photos. There is not much in the logs - from /var/log/syslog Dec 2 16:20:52 mishtop dbus[945]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper) Dec 2 16:20:52 mishtop dbus[945]: [system] Successfully activated service 'org.freedesktop.UDisks' Dec 2 16:21:24 mishtop kernel: [ 2297.180130] usb 2-2: new high-speed USB device number 4 using ehci_hcd Dec 2 16:21:24 mishtop kernel: [ 2297.314272] usb 2-2: New USB device found, idVendor=04a9, idProduct=3146 Dec 2 16:21:24 mishtop kernel: [ 2297.314278] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Dec 2 16:21:24 mishtop kernel: [ 2297.314283] usb 2-2: Product: Canon Digital Camera Dec 2 16:21:24 mishtop kernel: [ 2297.314287] usb 2-2: Manufacturer: Canon Inc. Dec 2 16:21:24 mishtop mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" Dec 2 16:21:24 mishtop mtp-probe: bus: 2, device: 4 was not an MTP device This problem has only started recently and I've had all the hardware for ages. I have also recently upgraded to 12.10, though I'm not sure if the problem started when I upgraded or after the upgrade. I also note this similar question but it is currently unanswered and I'm providing more detail

  Read the article

• Metaphor for task synchronization [closed]

  - by nkint

  I'm looking for a metaphor. A friend of mine taught me to use metaphors from nature, everyday life, math, and use them to design my projects. They can help in creating a better design or better understanding or the problem, and they are cool. Now I'm working on a project with hardware and micro-controllers in C. For convenience, I have decided to use multiple micro-controllers as co-processor units for real-time (the slaves) and a master. This has saved me a lot of headache: I can code the main logic in the master without paying too much attention to super optimizing everything; I don't care if I need some blocking-call; I don't worry about serial communication with the computer. I just send messages to the slaves and they are super fast super in real time. I like my design and it seems to work well. So here are the important concepts that I'm trying capture in the metaphor: hierarchy of processing Not using one big brain but rather several small, distributed brain units using distributed power or resources I'm looking for a good metaphor for this concept of having one unit synchronize the work of all the others. Preferably, the metaphor would come from nature, biology, or zoology.

  Read the article

• New Book: Oracle Exalogic Elastic Cloud Handbook

  - by user12608550

  Oracle Exalogic Elastic Cloud Handbook, by Tom Plunkett, TJ Palazzolo, and Tejas Joshi, Oracle Press. The well-known characteristics and tiers of cloud computing have spawned myriad implementations by a host of vendors and system integrators. One of these, Oracle's Exalogic Elastic Cloud, part of Oracle's family of Engineered Systems, is a key component of Oracle's public and private cloud computing solutions, providing critical PaaS (Platform as a Service) features for cloud developers. These developers need guidance to take advantage of Exalogic's extensive capabilities, and the Oracle Exalogic Elastic Cloud Handbook, written by three highly experienced Oracle technologists, provides that guidance. Part One of the book covers Exalogic's hardware and software components, and includes a very useful chapter on deployment examples, describing best practices for scalabiity, availability, backup and recovery, and multi-tenant security, including integration with other Oracle Engineered Systems and products such as Exadata and storage subsystems. Part Two is a thorough guide to Exalogic installation features, configuration and monitoring, packaged application software management, and scalable application development. The book also provides an extensive list of online resources, including pointers to Web sites, whitepapers, instructional videos, and other Oracle documentation. So, if you're planning to implement Exalogic as part of your cloud infrastructure, or are considering such, you'll find lots of sage advice and best practices in this handbook.

  Read the article

• 12.04 LTS boot hangs at "SP5100 TCO timer: mmio address 0xfec000f0 already in use", didn't yesterday

  - by DarkIron112

  Dual-booting Windows 7 and Ubuntu 12.04 LTS. I went to reboot from Win to Ubu, and found a few interesting things. My POST screen is covered in blocks of epileptic colors until I hit GRUB, which continues when I try to boot into Ubuntu. These color blocks don't appear when I use my on-board VGA, so I'll just attribute to that. Grub dimensions are swapped (card vs onboard, probably), but, when interfacing with onboard VGA, the Grub Timeout Counter works and when using my card, it does not (see "[!!!]" below for more information) Booting into Ubuntu directly causes the error: SP5100 TCO timer: mmio address 0xfec000f0 already in use Booting into recovery mode, meanwhile, and then "resuming normal boot" gets me to the desktop without native 1440x900 resolution and graphic drivers can't tell the monitor it's looking at (I assume this is because it's not a full graphic boot, and as it says, some drivers won't run?) [!!!] When I reboot after going into recovery mode, the countdown timer works ONCE, puts me back into default ubuntu boot, and then does not work again until after another recovery-mode boot. Windows 7 can boot perfectly with no issues whatsoever from epilepsy color blocks or driver detection. This makes me wonder /why/ the POST screen can't handle my video card anymore. Amidst all the diagnostics, I opened my case and re-seated the videocard securely, ensuring it wasn't a loose connection-- But this did nothing to help me. Hardware I am running an NVidia GeForce GTX 8800 video card in a PCI slot. I have 4.8GiB memory, an AMD Athlon II Quad-core 640 Processor, on an MSI K9N6GM Series Mobo. Onboard video is an NVidia GeForce MCP61(V/S/P) card. Note: I did not have any of these problems yesterday, and I have been using Ubuntu intensively for a week, though it's been working flawlessly for months. I've recently been using it to mod my Android phone, perhaps I messed something up in the file system?

  Read the article

• Great Example of a Simple Cost-Benefit Analysis

  - by BuckWoody

  I saw a post the other day that you should definitely go check out. It’s a cost/benefit decision, and although the author gives it a quick treatment and doesn’t take all points in the decision into account, you should focus on the process he follows. It’s a quick and simple example of the kind of thought process we should have as data professionals when we pick a server, a process, or application and even platform software. The key is to include more than just the price of a piece of software or hardware. You need to think about the “other” costs in the decision, and then make the right one. Sometimes the cheapest option is the cheapest, and other times, well, it isn’t. I’ve seen this played out not only in the decision to go with a certain selection, but in the options or editions it comes in. You have to put all of the decision points in the analysis to come up with the right answer, and you have to be able to explain your logic to your team and your company. This is the way you become a data professional, not just a DBA. You can check out the post here – it deals with Azure, but the point is the process, not Azure itself: http://blogs.msdn.com/eugeniop/archive/2010/03/19/windows-azure-guidance-a-simplistic-economic-analysis-of-a-expense-migration.aspx Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Oracle Database Appliance and Remarketers - A Whole New Opportunity

  - by Martin Morganti

  We have recently had another exciting announcement for the remarketer initiative. The Oracle Database Appliance is now available for resale through your authorized Value Added Distributor. This means that with no fees, no barriers and no upfront commitments, a remarketer can identify and close transactions for the Oracle Database Appliance without having to sign an Oracle contract. In addition, the remarketer is now authorized to sell the Oracle Database Appliance with Oracle Database 11G Enterprise Edition, RAC or RAC One Node software included in the transaction. The availability of the Oracle Database Appliance for remarketers means that a broad base of customers through remarketers can now start engaging with Oracle by taking advantage of this engineered system technology; basically Oracle Hardware and Software Engineered to Work Together to drive incremental revenue. The Oracle Database Appliance is a simple, reliable and affordable way to rapidly deploy a database cluster by plugging in the power; the network and pushing the one button install for the Appliance Manager software. Find out more about the Oracle Database Appliance, including a webinar by Oracle President Mark Hurd, as well as other material to help you better understand the opportunity available to you as remarketers. If you want Oracle to keep you informed about developments in Remarketer complete the free registration, or talk to your local Oracle Remarketer Authorized value added distributors. (Complete list available on the Oracle Remarketer page).

  Read the article

• Yoga Pro 2 Wi-Fi not working

  - by user293004

  I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

  Read the article

• JavaOne India Early Bird Discount Ends April 2nd

  - by Tori Wieldt

  JavaOne India3-4 May, 2012Hyderabad International Convention Centre Register Now and Save – For A Limited Time!If you register by 2 April, you'll save INR 1080 on this premier Java technology conference. JavaOne will return for the second straight year to India May 3, 4 at the Hyderabad Convention Center. This year's line up will once again bring some of the leading experts in from all over the world as well as local Indian content. Sharat Chander (Director - Java Technology Outreach) said, "JavaOne is the premier Java technology conference in the world, for developers by developers.  Every year we keep increasing community participation in both the content selection and content delivery, and this year we expect even more."The JavaOne India tracks are:Client-Side Technologies and Rich User ExperiencesLearn about developments in Java for the desktop and practices for building rich, immersive, and powerful user experiences across multiple hardware platforms and form factors. Core Java PlatformDiscover the latest innovations in Java virtual machines. Get deep technical explanations in security and networking and enhancements that allow dynamic programming languages to drive Java platform adoption. Java EE Web Profile, Platform Technologies, Web Services, and the Cloud Update your knowledge on topics such as Web application development, persistence, security, and transactions. This track will also address modularity, enterprise caching, Web sockets, and internet identity. Mobile, Java Card, Embedded, and DevicesThis track is devoted to Java technology as the ultimate platform for mobile computing. It also covers embedded and device usages of Java technologies, including Java SE, Java ME, Java Card, and JavaFX. Share this event: #javaoneIndia

  Read the article

• 12.04 wired network doesn't work RTL8111/8168B

  - by laket

  its a fresh 12.04 install 64bits. wifi works fine, wired stays off with cable connected and network-manager shows as if cable is disconnected. Turning off networking lights up my network-cards leds, turning networking on shuts off the leds and no communication is possible. I already tried, turning off the network-manager (sudo service network-manager stop) and setting up my eth0 manually, as soon as I switch off the network-manager my leds light up, but after setting up manually eth0 (sudo ifconfig eth0 10.2.10.114 netmask 255.255.0.0 up) the leds turn off again. I am still dual booting with 10.04 where I have no issues at all, leaving the cable connected all time to my notebook and a switch. Here is some hardware info: lshw: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 03 serial: c8:0a:a9:d7:05:97 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168d-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff memory:f0010000-f001ffff lspci: 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ifconfig eth0: eth0 Link encap:Ethernet HWaddr c8:0a:a9:d7:05:97 inet addr:10.2.10.114 Bcast:10.2.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0xc000 cat /etc/network/interfaces: (already tried here with and w/o eth0) auto lo eth0 iface lo inet loopback cat /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false Any help is welcome ;) Laket

  Read the article

• XNA 4.0, Combining model draw calls

  - by MayContainNuts

  I have the following problem: The levels in my game are made up of a Large Quantity of small Models and because of that I am experiencing frame rate problems. I already did some research and came to the conclusion that the amount of draw calls I am making must be the root of my problems. I've looked around for a while now and couldn't quite find a satisfying solution. I can't cull any of those models, in a worst case scenario there could be 1000 of them visible at the same time. I also looked at Hardware geometry Instancing, but I don't think that's quite what I'm looking for, because the level consists of a lot of different parts. So, what I'd like to do is combining 100 or 200 of these Models into a single large one and draw it as a whole 'chunk'. The whole geometry is static so it wouldn't have to be changed after combining, but different parts of it would have to use different textures (I think I can accomplish that with a texture atlas). But I have no idea how to to that, so does anybody have any suggestions?

  Read the article

• Oracle VM 3.1.1 build 365 released

  - by wcoekaer

  A few days ago we released a patch update for Oracle VM 3.1.1 (build 365). Oracle VM Manager 3.1.1 Build 365 is now available from My Oracle Support patch ID 14227416 Oracle VM Server 3.1.1 errata updates are, as usual, released on ULN in the ovm3_3.1.1_x86_64_patch channel. Just a reminder, when we publish errata for Oracle VM, the notifications are sent through the oraclevm-errata maillist. You can sign up here. Some of the bugfixes in 3.1.1 : 14054162 - Removes unnecessary locks when creating VNICs in a multi-threaded operation. 14111234 - Fixes the issue when discovering a virtual machine that has disks in a un-discovered repository or has un-discovered physical disks. 14054133 - Fixes a bug of object not found where vdisks are left stale in certain multi-thread operations. 14176607 - Fixes the issue where Oracle VM Manager would hang after a restart due to various tasks running jobs in the global context. 14136410 - Fixes the stale lock issue on multithreaded server where object not found error happens in some rare situations. 14186058 - Fixes the issue where Oracle VM Manager fails to discover the server or start the server after the server hardware configuration (i.e. BIOS) was modified. 14198734 - Fixes the issue where HTTP cannot be disabled. 14065401 - Fixes Oracle VM Manager UI time-out issue where the default value was not long enough for storage repository creation. 14163755 - Fixes the issue when migrating a virtual machine the list of target servers (and "other servers") was not ordered by name. 14163762 - Fixes the size of the "Edit Vlan Group" window to display all information correctly. 14197783 - Fixes the issue that navigation tree (servers) was not ordered by name. I strongly suggest everyone to use this latest build and also update the server to the latest version. have at it.

  Read the article

• Can't use nvidia card/driver on optimus notebook

  - by Mr. Pixel

  I installed (once again) the latest official nvidia driver for my GT540m on Ubuntu 11.10. Even though everything seems OK with my xorg.conf file (I've manually added BusID "PCI:1:0:0", since lspci shows 01:00.0 for my GPU). The problem is, when I use the xorg.conf file generated by Xorg -configure, Xorg automatically loads the Intel GPU. So I removed everything that was not related to my nvidia card, basically leaving my xorg.conf with one screen and one device (with the nvidia driver and the above-mentioned BusID), and Xorg fails to start. The log says something like "Devices on GT540m [newline] none" And a few lines later, something like "NVIDIA(0) found a screen, but have no device for it". When I don't set the BusID, it doesn't seem to detect my card either. Thank you for any suggestion. PS: If possible, I'd like to avoid bumblebee or any similar "hybrid graphics" solution, last time I tried I ended up reinstalling Ubuntu. Edit: Allow me to clarify the problem. I have a notebook with a GT540m graphics card, and an integrated intel gpu. I want to use the graphics card with full hardware acceleration and its official driver, as I do under windows.

  Read the article

• Building a Redundant / Distributed Application

  - by MattW

  This is more of a "point me in the right direction" question. My team of three and I have built a hosted web app that queues and routes customer chat requests to available customer service agents (It does other things as well, but this is enough background to illustrate the issue). The basic dev architecture today is: a single page ajax web UI (ASP.NET MVC) with floating chat windows (think Gmail) a backend Windows service to queue and route the chat requests this service also logs the chats, calculates service levels, etc a Comet server product that routes data between the web frontend and the backend Windows service this also helps us detect which Agents are still connected (online) And our hardware architecture today is: 2 servers to host the web UI portion of the application a load balancer to route requests to the 2 different web app servers a third server to host the SQL Server DB and the backend Windows service responsible for queuing / delivering chats So as it stands today, one of the web app servers could go down and we would be ok. However, if something would happen to the SQL Server / Windows Service server we would be boned. My question - how can I make this backend Windows service logic be able to be spread across multiple machines (distributed)? The Windows service is written to accept requests from the Comet server, check for available Agents, and route the chat to those agents. How can I make this more distributed? How can I make it so that I can distribute the work of the backend Windows service can be spread across multiple machines for redundancy and uptime purposes? Will I need to re-write it with distributed computing in mind? I should also note that I am hosting all of this on Rackspace Cloud instances - so maybe it is something I should be less concerned about? Thanks in advance for any help!

  Read the article

• Venez nous voir au Forum Oracle Big Data le 5 avril !

  - by Kinoa

  Le Big Data vient de plus en plus souvent au devant de la scène et vous souhaitez en apprendre davantage ? Générés à partir des réseaux sociaux, de capteurs numériques et autres équipements mobiles, les Big Data - autrement dits, d'énormes volumes de données - constituent une mine d'informations précieuses sur vos activités et les comportements de vos clients. Votre challenge aujourd’hui consiste à gérer l’acquisition, l’organisation et la compréhension de ces volumes de données non structurées, et à les intégrer dans votre système d’information. Vous avez des questions ? Ca vous parait complexe ? Alors le Forum Oracle Bid Data organisé par Oracle et Intel est fait pour vous !   Nous aborderons plusieurs points : Accélération du déploiement de Big Data par l'approche intégrée du hardware et du software Mise à disposition de tous les outils nécessaires au processus complet, de l'acquisition des données à la restitution Intégration de Big Data dans votre système d'information pour fournir aux utilisateurs la quintessence de l'information Nous vous avons concocté un programme des plus alléchant pour cette journée du 5 avril : 9h00 Accueil et remise des badges 9h30 Big Data : The Industry View. Are you ready ?Johan Hendrickx, Core Technology Director, Oracle EMEA Keynote : Big Data – Are you ready ? George Lumpkin, Vice President of DW Product Management, Oracle Corporation Acquisition des données dans votre Big Dataavec Hadoop et Oracle NoSQL Pause Organisez et structurez l'information au sein de votre Big Data avec Big Data Connectors et Oracle Data Integrator Tirez parti des analyses des données de votre Big Dataavec Oracle Endeca et Oracle Business Intelligence 13h00 Cocktail déjeunatoire Le nombre de places est limité, pensez à vous inscrire dès maintenant. Lieu :  Maison de la Chimie28 B, rue Saint Dominique 75007 Paris

  Read the article

• How can I set my resolution to 1280x1024 on an Acer Aspire Revo 3700?

  - by torbengb

  I've just set up a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. Almost everything works OK, but the graphics are not OK: the recommended Nvidia driver is activated but the monitor is not detected, so the resolution is wrong. How can I make Ubuntu detect my monitor? How can I get the proper resolution (1280x1024) in Ubuntu? I know that my monitor is not a CRT but an LCD: it's a BenQ, model T905, with 1280x1024 resolution at 60Hz, connected via a normal VGA cable. DVI or HDMI is not an option. When I go to SystemPrefsMonitors, I get: It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead? YES NO If I say NO then I get a window: or for YES I get this: In both cases I don't see that I can fix this problem. The main reason for getting this new computer was that I was sick of having graphics problems on the old one with a very ugly solution that didn't give me hardware support - but at least I got the resultion. Why is this so difficult... sigh!

  Read the article

• USB device not accepting address

  - by Mike Williamson

  I have a series of machines that I am building for work that have usb card readers. When I boot them I get a long series of messages: ... [ 2347.768419] hub 1-6:1.0: unable to enumerate USB device on port 6 [ 2347.968178] usb 1-6.6: new full-speed USB device number 10 using ehci_hcd [ 2352.552020] usb 1-6.6: device not accepting address 10, error -32 [ 2352.568421] hub 1-6:1.0: unable to enumerate USB device on port 6 [ 2352.768179] usb 1-6.6: new full-speed USB device number 12 using ehci_hcd [ 2357.352033] usb 1-6.6: device not accepting address 12, error -32 ... On some older machines this only takes a few attempts before the card reader finally accepts an address, while on newer machines it can take many minutes. Changing hardware is not an option and plugging the usb card reader into a different port is only an option for the older manchines. This was a problem under 11.04 and I am now running the 12.04 beta and its still happening. Is there something I can do in the software (a udev rule perhaps?) that would fix this? Any advice appreciated. I'm happy to provide more details if you need them.

  Read the article

• Unity 3D does not work on Dell system with a AMD Radeon HD 6470M

  - by VeeKay

  I am running 64 bit Ubuntu on Dell with 1GB graphic card. I login with "Ubuntu" hoping to see Unity 3d but it doesn't. Unity 2D runs instead. when I type in echo "$DESKTOP_SESSION" it confirms the Unity-2D. I've checked the System info that shows like : The graphics row shows itself as empty. SO I've presumed that the graphic drivers aren't detected and hence I went to Unity- Additional Drivers and installed the fglrx driver that the UI has suggested. Even after installing so, the graphics part in System info details shows nothing and still Unity 2D runs in spite of all the effort. Please help! How can I get my Unity 3D back? Hardware Info Video Card : AMD Radeon™ HD 6470M - 1GB (For ICC) RAM : 6GB (1 X 2GB + 1 X 4GB) 2 DIMM DDR3 1333Mhz OS : 64 bit Ubuntu 11.10 Edit : Output for /usr/lib/nux/unity_support_test -p X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 155 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 21 Current serial number in output stream: 21

  Read the article

• Impossible to enable bluetooth under Ubuntu

  - by PCh

  I just installed Ubuntu 12.04 (dual boot, kept Windows just in case) on my new Acer Aspire One 756-877. As soon as I installed it I also installed the Broadcom driver, since wifi wasn't working, and that solved it right away. But when I tried Bluetooth, I had a problem that I see is quite recurring: -The hardware is on (and working fine under Windows) -The icon shows up on the menu, giving me the options of turning Bluetooth on or off, and then just "Bluetooth preferences". -I can apparently turn it on that way, which only lights up the icon but makes no difference at all (and doesn't give any other options in the Bluetooth menu) -When I open "Bluetooth preferences" (whether Bluetooth is apparently on or off, it makes no difference), it says it's disabled and will not let me slide the button to enable it. I've rebooted, but nothing happens. -The material is Broadcom and the port (if it's relevant at all) is Port_#0001.Hub_#0003 I tried the following commands suggested in other similar questions, with no result at all: sudo dmesg | grep blue and sudo service bluetooth start and sudo /etc/init.d/bluetooth start Any other clues on what I can do? Thanks for your time!

  Read the article

• Channel-Chat mit Silvia Kaske

  - by A&C Redaktion

  Die Channel-Expertin spricht im Interview mit der IT-Business über Engineered Systems, neue Wege im Partner-Geschäft und die Konsolidierung der IT-Branche Das Produktspektrum von Oracle wird, vor allem seit der massiven Ausweitung in Richtung Hardware, immer breiter. Umso notwendiger werden Spezialisierungen für die Partner. Im Exklusivinteriew mit der IT-Business beantwortet Silvia Kaske, Senior Director Channel Sales & Alliances North bei Oracle, unter anderem die Frage „Wie man im Oracle Universum Geld verdient“. Neben unserem Blog-Kernthema, den Spezialisierungen, spricht Kaske auch darüber, wie die neue Projektdatenbank hilft, im Channel Konflikte zu vermeiden. Das lesenswerte Interview finden Sie als Titelstory in der IT-Business Nr. 17/2012 und auf IT-Business.de. Hier ein Abstract, was Sie dort erwartet: Zu den Engineered Systems, einem zentralen Thema für Oracle, äußert sich Kaske gleich zu Beginn. Sie betont, dass Oracle zwar optimal abgestimmte Gesamtpakete wie die Oracle SOA Suite anbietet, jedoch keine Entwicklung hin zu in sich abgeschlossenen Systemen möchte. Oracle Lösungen bleiben offen für die Kombination mit Produkten anderer Anbieter. Optimized Solutions seien vor allem dafür da, „die interne Komplexität in Unternehmen zu minimieren, um damit Kosten für den Betrieb der bestehenden Systeme zu senken.“ Das ausgefeilte System der Spezialisierungen hat ein klares Ziel: „Wir wollen Partner, die genau wissen, was sie tun, und die Endkunden bestmöglich beraten und betreuen“, sagt Kaske. Das erfordert ein hohes Wissen in einer oder mehreren Branchen oder Produktsegmenten – niemand erwartet schließlich von einem Partner, Experte für alle 9.000 Einzelprodukte zu sein. Dafür stehen derzeit über 100 zertifizierte Spezialisierungen zur Wahl. Das Programm OPN Specialised steht seit nunmehr zwei Jahren für die Entwicklung hin zu höheren Zertifizierungsanforderungen und damit zu noch kompetenteren Partnern. Zudem fördert Oracle die Kooperation verschieden spezialisierter Partner untereinander, Stichwort „Enablement 2.0“. Für einen reibungslosen Ablauf von Partnerprojekten sorgt deren Registrierung im Open Market Modell (OMM).

  Read the article

• Channel-Chat mit Silvia Kaske

  - by A&C Redaktion

  Die Channel-Expertin spricht im Interview mit der IT-Business über Engineered Systems, neue Wege im Partner-Geschäft und die Konsolidierung der IT-Branche Das Produktspektrum von Oracle wird, vor allem seit der massiven Ausweitung in Richtung Hardware, immer breiter. Umso notwendiger werden Spezialisierungen für die Partner. Im Exklusivinteriew mit der IT-Business beantwortet Silvia Kaske, Senior Director Channel Sales & Alliances North bei Oracle, unter anderem die Frage „Wie man im Oracle Universum Geld verdient“. Neben unserem Blog-Kernthema, den Spezialisierungen, spricht Kaske auch darüber, wie die neue Projektdatenbank hilft, im Channel Konflikte zu vermeiden. Das lesenswerte Interview finden Sie als Titelstory in der IT-Business Nr. 17/2012 und auf IT-Business.de. Hier ein Abstract, was Sie dort erwartet: Zu den Engineered Systems, einem zentralen Thema für Oracle, äußert sich Kaske gleich zu Beginn. Sie betont, dass Oracle zwar optimal abgestimmte Gesamtpakete wie die Oracle SOA Suite anbietet, jedoch keine Entwicklung hin zu in sich abgeschlossenen Systemen möchte. Oracle Lösungen bleiben offen für die Kombination mit Produkten anderer Anbieter. Optimized Solutions seien vor allem dafür da, „die interne Komplexität in Unternehmen zu minimieren, um damit Kosten für den Betrieb der bestehenden Systeme zu senken.“ Das ausgefeilte System der Spezialisierungen hat ein klares Ziel: „Wir wollen Partner, die genau wissen, was sie tun, und die Endkunden bestmöglich beraten und betreuen“, sagt Kaske. Das erfordert ein hohes Wissen in einer oder mehreren Branchen oder Produktsegmenten – niemand erwartet schließlich von einem Partner, Experte für alle 9.000 Einzelprodukte zu sein. Dafür stehen derzeit über 100 zertifizierte Spezialisierungen zur Wahl. Das Programm OPN Specialised steht seit nunmehr zwei Jahren für die Entwicklung hin zu höheren Zertifizierungsanforderungen und damit zu noch kompetenteren Partnern. Zudem fördert Oracle die Kooperation verschieden spezialisierter Partner untereinander, Stichwort „Enablement 2.0“. Für einen reibungslosen Ablauf von Partnerprojekten sorgt deren Registrierung im Open Market Modell (OMM).

  Read the article

• How do I stop sound coming from my speakers with a faulty headphone socket?

  - by Andy

  On my laptop, I have a faulty headphone socket, so when I insert headphones into it, the speakers do not mute. I can confirm that this problem is caused by faulty hardware and not software as when I twist the headphone jack, the speakers come on and off according to the movements. On previous versions of Ubuntu, I worked around this problem by going into alsamixer and disabling "Auto-Mute Mode", and then going into the sound settings and choosing "Analog Headphones". However, on 12.04, no such option exists, rendering my headphones unusable with no way to work around the problem. I momentarily thought I had this problem fixed when I installed PulseAudio Volume Control from the Software Centre. I selected the Output Devices tab, and under "Built-in Audio Analogue Stereo" I selected "Headphones" for the port. However, this almost randomly seems to change back to "Speakers", despite me setting "Auto-Mute Mode" as disabled. Basically, I would like a way to permanently mute the speakers so only the headphones will play sound, without it losing my settings. It is ridiculous that such a simple setting has been taken away to "simplify" the user interface.

  Read the article

• How do you get better working conditions? [closed]

  - by 0A0D

  I work at a business who has a software side and manufacturing side. The software we write is sold as a package along with other hardware that our customers purchase. I basically work in a warehouse. There is one door that seperates the engineers from the warehouse noise. I have asked for noise cancelling walls to be put in. I have asked multiple times over 6 months to be moved up front to one of two vacant sales offices, but they seem reluctant to let an Engineer move into a sales office. In fact, sales are the only ones with windows and they get commission though they make mistakes or overpromise to the customer. So, my question is how can I get better working conditions without necessarily having to leave my current job? It is very hard to work and concentrate. UPDATE I think I can finally close this chapter in my life. I have moved on to a large corporation which follows CMMI religiously and has even started using Agile in many of its projects. Nevertheless, there is organization, respect, and genuine care for the engineers and scientists that work for them. Pierre was right - quitting was the right answer. My life does not nearly have the amount of stress it used to have because I now work for a place that is organized and knows what it wants its engineers to do along with treating them like they should be treated.

  Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >