Search Results

Search found 12019 results on 481 pages for 'stop execution'.

Page 273/481 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

• Can Autodesk Flame run with an nVidia Quadro FX3800 SDI and output to preview through SDI???

  - by cragno

  I am running on Linux RHEL 4.3, DKU 5.0.1. Everything seems to be ok on the xorg.conf and init.cfg, but when I start my projects and Flame enables output to preview I start having preview on my SDI monitor and stop seeing on my main monitor (which is connected to the DisplayPort). Could it be posible that Flame needs Quadro FX4x00/5x00 series with dual DVI to output both monitors?? Cause the FX3800 has only one DVi (which is connected to the SDI card) and 2 DisplayPorts as additional output monitors. Anyone knows a config or workaround this problem?? Thanks ahead!!!

  Read the article

• Not able to safely remove external disk after having mounted and unmounted a VHD on it

  - by Agnel Kurian

  I am using Windows 7 SP 1. I have an external hard disk (Seagate 500GB) which I am able to use without problems most of the time. I am able to plug it in, use it and then safely unmount it via the "Eject USB Mass Storage Device" option in the taskbar tray. However, if I attach a VHD file located on this disk using "Disk Management", then detach the VHD and finally try to safely disconnect the disk via the system tray, I get an error which says: "Problem Ejecting USB Mass Storage Device: Windows can't stop your 'Generic volume' device because a program is still using it. Close any programs that might be using the device, and then try again later." How do I avoid this problem? Which process could still be accessing the device (even after I have closed the "Disk Management" application) ?

  Read the article

• Ending a program on Windows Mobile 6 that refuses to die

  - by Brandon

  I have an application that was installed on a handheld device running Windows Mobile 6.0. The application basically connects to a remote server and sends scanned barcodes to it. The application shut down unexpectedly, and now it refuses to go away. I tried starting it up again and nothing happened. I went to the Running Programs, hit Stop All, and it ended everything but the application. It gives an error saying it's not responding, so I try to End Task, and it does nothing. I even uninstalled and reinstalled the application. Is there any way to kill this thing?

  Read the article

• How to ask Debian not to check last mount time of its file system?

  - by Landy

  I'm using Debian 6.0.5. To test a feature of my product, I need to modify the system date&time back and forth frequently. Once a time I set the system date back to one month ago, then I reboot the system, and it reported the last mount time of the file system is in the future and enter the maintenance mode automatically. I had to run the fsck to make sure the file system is not broken to boot into Debian. Is there any way to ask Debian stop checking the last mount time of its file system when booting? Thanks.

  Read the article

• email archive for multiple users

  - by evanmcd

  Hi, I'm moving a web site from one server to another, and am realizing that I need to move the name servers for the domain as well (they are set to the current host, not to the registrar). So, knowing that email services will stop as soon as I switch the DNS, I'm scrambling to figure out how to archive and make available email data for folks that have mostly been using webmail for the past few years, and may not even have a computer on which to install a client to download the mail to. What does one do in this situation? Thanks for any help offered! Evan

  Read the article

• How to disable Utility Manager (Windows Key + U)

  - by Skizz

  How do I disable the Windows Key+U hotkey in Windows XP? Alternatively, how do I stop the utility manager from being active? The two are related. The utilty manager is currently providing a potential security hole and I need to remove it*. The system I'm developing uses a custom Gina to log in and start a custom shell. This removes most Windows Key hotkeys but the Win+U still pops up the manager app. Update: Things I've tried and don't work: NoWinKeys registry setting - this only affects explorer hotkeys; Renaming utilman.exe - program reappears next login; Third party software - not really an option, these machines are audited by the clients and additional, third party software would be unlikely to be accepted. Also, the proedure needs to be reasonably straightforward - this has to be done by field service engineers to existing machines (machines currently in Russia, Holland, France, Spain, Ireland and USA). * The hole is via the internet options in the help viewer the utility app links to.

  Read the article

• Tuning MySQL to consume less memory

  - by Alex

  I have a VM which has 2GB Ram, (full specs) And I am setting up a site which has one table in particular with over a million records. There's little or no usage of this particular database (perhaps once or twice a day) but simply running mysql grinds the whole server to a halt. I've looked through the top results but nothing is really denting the CPU however the memory seems to be the issue. The site isnt even live of taking requests yet. the memory situation looks like this: # free -m total used free shared buffers cached Mem: 2006 1880 126 0 3 53 -/+ buffers/cache: 1823 183 Swap: 2047 345 1702 Are there any good pointers to tune mysql to stop hogging the system memory? Thanks very much EDIT: (requested by 8bit): http://tny.cz/b41a0b12

  Read the article

• How do I turn off caching in IIS7?

  - by jammus

  Hello. I'm developing an ASP classic site under Windows 7 (form a queue ladies). The problem is IIS seems to be heavily making use of its cache for both static and dynamic content which really conflicts with my 'make a small change, alt-tab, hit ctrl-F5' development style. Changes made to .asp files may take two or three refreshes to show up where as changes to .js files can take 20 times as many. How do I go about turning the caching off on my development machine? Cheers. in b4 stop using asp classic

  Read the article

• Apache conf for high trafic CMS with backend users?

  - by Annan

  I'm in the situation where a website is going to have a high number of web users and a few backend webmasters. Webmasters will upload images (+other high mem tasks) and this bumps up the memory allocation of the httpd child processes to 100-150mb. In order to stop swapping I'm currently setting MaxClients in httpd.conf to 20. However this lowers maximum simultaneous requests. Will this be a problem when the website goes live? What is the best configuration? Info: Drupal 6, PHP 5, Apache 2.2 (Prefork atm) I'm thinking about Worker MPM, two apache instances or low MaxRequestsPerChild.

  Read the article

• Time randomly changing itself, internet randomly dying

  - by Vee

  Operating System MS Windows 8 Enterprise 64-bit CPU Intel Core i7 2700K @ 3.50GHz 45 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 800MHz (8-8-8-24) Motherboard ASRock Z77 Extreme4-M (CPUSocket) 40 °C Graphics SMXL2270HD (1920x1080@60Hz) M2094D-PZ (1680x1050@60Hz) 896MB GeForce GTX 275 (CardExpert Technology) 57 °C Hard Drives 466GB FUJITSU MAXTOR STM3500320AS (SATA) 39 °C Optical Drives ASUS DRW-2014L1T Audio High Definition Audio Device Hello everyone, I installed Windows 8 RTM a few weeks ago. It's not my first time installing it, but it's the first time having two annoying problems: 1) Randomly, the system clock changes time all by itself - to fix it I have to open the time window and sync it with the internet. 2) Randomly, internet connection stops working - to fix I have to run troubleshooting. Windows will find a problem with IP on the "Ethernet" connection and fix it. 3) In rare occasions, my PC freezes and I need to restart it (a BSOD once happened, but after that only freezes) How can I permanently solve these problems? This is what I've already tried: Reset Virus scan Stop/reset the Windows Time service Disable/re-enable Windows Time automatic internet sync Change time from BIOS Change motherboard battery

  Read the article

• Netcat UDP File Transfer Between Two Servers Times Out?

  - by Mark Bowytz

  I'm testing file transfer speeds between two Red Hat servers that are connected to the same switch within the data center and I decided to use netcat to eliminate protocol overhead as much as possible. Testing in TCP mode went well and I was wondering how UDP might fare. On my receiving (client) end, I ran this: nc -u -l 11225 -v > myfile.out And then on the sending (server) end I ran the following: cat myfile.out | nc -u myserver.foo.zzz.com 11225 -v The file I'm testing with is 38 GB but the transfer seems to stop at around 15 GB (one time at 14.9, another at 15.6). I've tested by adding a "-w 5000" just in case it's timing out but no joy. Adding the -v doesn't show anything except acknowledging that the connection occurred. No errors. So - any suggestions as to why would the transfer cease?

  Read the article

• Moving the Windows Workflow database: safe enough?

  - by Chris

  We have a Windows Workflow service that is running in the IIS context and persisting to a database in between hydrates. It has the Tracking Service turned on, as well. We're looking to move the database to another server, and I wanted to make sure there are no gotchas in doing so. My current plan would just be to spin down IIS to stop all activity, back up the database, migrate the database, then flip connection strings in my application to point to the new one. My main concern was if existing workflows somehow need to stay on the same database or not, or if some activity needs to happen for them to work after the move. I wouldn't think so, but just planning ahead.

  Read the article

• MS-DOS application sending screen output to LPT printer

  - by gadget00

  We have a MS-DOS application(coded in FoxPro), and recently had this glitch: the screen menu of the application without reason starts printing in an LPT Panasonic KX-1150 printer. It's a never ending print of all the screens of the application, as if the main output instead of sending it to the monitor, sends it to the printer! It creates a unnamed document with N/D pages and keeps printing forever. We have to turn the printer off and then kill the document in the spool to stop it... The printer is installed with a Generic/Text driver, and has happened to us both in WindowsXP and Win7. What can this be? Thanks in advance

  Read the article

• Looking for a Linux stream ripper that can be scheduled

  - by Anthony D

  I have an MP3 stream I want to schedule a recording of. I can do it using wget to a file, its just a straight mp3 stream. However I'd like to use a command line stream ripper that will do a better job. Any one know of one? Update 1 WGET is grabbing whatever part of the stream it comes in on. This may not really be the start of a frame in the MP3 file. Also, wget is not really schedule ready. I experimented with starting it with a cron job, then killing it later, this produced a file that didn't really start and stop where I wanted.

  Read the article

• Amazon EC2 Elastic Load Balancing - strategy for zero downtime server restart

  - by Yoga

  I have 5 web servers (Apache/mod_perl) behind Amazon EC2 Elastic Load Balancing, when I deploy codes to the web servers, I am doing this.. For each machine, shutdown the Apache Update the code Start over the server and proceed to the next server I think when my server is shutdown, ELB will not distribute request to my server, but how about the request still serving? I think a better approach is Stop accepting new request from ELB Sleep for sometimes, shutdown web server only if all requests are responded Update the codes Start the server again But how to perform (1) and (2) from my local sever? Do I need to use AWS API? or other easy way to do it? Thanks.

  Read the article

• Apache CPU usage stays at 100% even when there are no requests

  - by Leirith

  Hi, I've been running the Apache HTTP server benchmarking tool (ab) on my new Apache server to test performance. I noticed that with a command like the following: ab -n 100000 -c 1000 http://www.mysite.com/ The CPU is used 100% by the apache2 processes during the testing. When the test concludes, usually with the following error just before the last requests are made: apr_poll: The timeout specified has expired (70007) Total of 99960 requests completed the CPU usage remains at 100%, and it's all being consumed by apache. I am using the worker MPM with and running PHP with mod_fcgid. Any advice as to why this is or what can be done to stop it would be appreciated.

  Read the article

• java for freebsd

  - by rawman

  I am trying to install java on freebsd 7.X and i have done following thing so far download the tar file from this link and store the file in cd /usr/ports/distfiles/ after that i run cd /usr/ports/java/diablo-jre16 or cd /usr/ports/java/diablo-jdk16 make config install clean and uncheck all the options in config screen now after doing all this now i am getting following message to indicate for amd version even if my server is using intel Core2Quad Q9550 2.83 GHz mail# make install === Vulnerability check disabled, database not found === License check disabled, port has not defined LICENSE === Found saved configuration for diablo-jdk-1.6.0.07.02_12 Because of licensing restrictions, you must fetch the distribution manually. Please access http://www.FreeBSDFoundation.org/cgi-bin/download?download=diablo-caffe-freebsd7-amd64-1.6.0_07-b02.tar.bz2 with a web browser and "Accept" the End User License Agreement for "Caffe Diablo 1.6.0". Please place the downloaded file(s) in /usr/ports/distfiles. * Error code 1 Stop in /usr/ports/java/diablo-jdk16. mail# (as before i was getting error for tzupdater so i downloaded tzupdater-1_3_29-2010f.zip and put it in a cd /usr/ports/distfiles/ folder)

  Read the article

• Does Apache 2.2 (windows) have any default bandwidth limit?

  - by igino manfre'

  I'm running Apache on a server in cloud (Windows server 2008 R2 on VMware, 1 Gbps of BW, http://95.110.164.61 ). I'm streaming many live DVB MPEG Transport Stream, precompressed in loop, (not flash) generated by VLC on port 640xx and then reverse proxied by Apache on port 80. The server's firewall is open for VLC and Apache on all ports. Above 1.5 Mbps the reproduction is affected by continous stop & go. Please note that if you request a stream generated by VLC directly at http://95.110.164.61:64087/mpg2_6.4 you see a correct stream, while if you request http://95.110.164.61/mpg2_6.4 you do not. I know that Flash streaming Server uses Apache to stream on port 80 (and it works). I'm not an expert with Apache, can anyone tell me if any "special" module is required to increase the bandwidth?

  Read the article

• AuthInfoRequired cups overwrites

  - by mooscape

  My problem is basically identical to the following: http://bbs.archlinux.org/viewtopic.php?id=61826 Put simply, I have a machine in ubuntu trying to connect to another ubuntu machine via a network in order to use the printer attached. There is no problem printing until I restart the guest machine. Immediately it overwrites the printers.conf file (under /etc/cups/printers.conf). It always adds the same line: AuthInfoRequired username,password I stop cups and change it to *#*AuthInfoRequired username,password to comment out the command. Start cups. Works great 'til the next shutdown. Then it gets overwritten again. Googling indicates it may be GTK problem and not CUPS, but I have found no permanent solution to date. Any suggestions appreciated ....

  Read the article

• How can I prevent a Windows laptop from making noise when starting up?

  - by Walkerneo

  I have a Windows 7 laptop here that makes a noise each time it starts up. I know I can disable that noise now that I'm logged on, but how could I have prevented it WHILE logging on? I remember that there was one of the function keys (F8?) that would allow you to boot into safe mode, but is there a key that will stop the startup sound? Imagine, for example, having your laptop in the library when you know the volume is all the way up - how could you log into your computer without disturbing everyone else?

  Read the article

• is there any way to lock few Windows Registry enteries

  - by Moorage

  I have seen that most of virus , spyware etc changes few registry files which are linked to boot process or which starts when window loads user settings. Is there any way to lock those files which are linked to start the system like explorer.exe , userinit.exe so that virus at least should not be able to stop the system to start up. Why did'nt microsoft put those registry file separately so that nothing can touches them Now my userinit.exe file is affected and its not letting me logn on to computer. I get blank desktop but system loads during safe mode. I have run anti virus bootable cd but still have not found solution

  Read the article

• IP issue with Heartbeat & DRBD

  - by adam0345

  I'm in the process of setting up 3-node stacked DRBD, and i'm experiencing a rather bizarre issue. Two nodes are located at the data center, and the 3rd node is located locally. The Primary and Secondary nodes are working as expected, however the 3rd node won't connect to the primary. If I ping the IP provided by heartbeat on the 3rd node it will return 100% packet loss, if I reset networking interfaces, ping will then return a few successful packets, but then stop returning any packets. I can't work out any reason why this would be behaving like this. All nodes are running Debian Squeeze, and the latest version of DRBD.

  Read the article

• Disable log rotation for apache or move file location

  - by vittocia

  I need to change the log retention for apache, currently is seems to be running on the default from logrotate.conf which is weekly. It creates 'access_log.1' 'access_log.2' and so on for each week. The problem is it deletes the last log file every week, 'access_log.5', I need the logs to keep going infinitely instead of the last log being deleted every week. It seems to be running on the default value from logrotate.conf - I don't want to change the default values held in that file, so I assume there is a way to change the retention using the /etc/logrotate.d/httpd file? the contents are as follows: /var/log/httpd/*log { missingok notifempty sharedscripts postrotate /sbin/service httpd reload > /dev/null 2>/dev/null || true endscript } what can I add/change to stop the last log being deleted every week?

  Read the article

• Unable to run Microsoft Office 2010 install file

  - by Len

  This problem began when I noticed that the icons in the Windows 7 task bar for MS Word and Outlook were generic. I rebuilt the icon cache. Still not the right icons, but not the generic "document" icons either, and both are identical (to each other). The two programs seem to be working OK. So then I tried to repair MS Office. I ran the setup file. It extracts the files, I get the splash screen, and then the message, "Setup has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." with a "Close program" button. Microsoft does not notify me about a solution. What I have tried: 1. running two other copies of the setup program; 2. doing an in-place re-install of Windows 7.

  Read the article

• Computer has power but won't boot

  - by John Isaacks

  When I power on my computer it will not boot. It will not even go into bios or anything. It is as if it is not powering on at all, however the decorative casing lights turn on and the PC is making noise (like from the fans). I am reluctant to think it is the power supply since some part are getting power. I do not know what it is though? For the couple days leading up to this, the computer would make a loud noise and the screen would stop displaying anything. I had to reboot to get it to work again. Now nothing happens when I boot, except the case lights come on and it sounds like some fans are coming on. Any ideas?

  Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >