Search Results

Search found 17749 results on 710 pages for 'connection pool'.

Page 275/710 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• How can I measure TCP timeout limit on NAT firewall for setting keepalive interval?

  - by jmanning2k

  A new (NAT) firewall appliance was recently installed at $WORK. Since then, I'm getting many network timeouts and interruptions, especially for operations which would require the server to think for a bit without a response (svn update, rsync, etc.). Inbound SSH sessions over VPN also timeout frequently. That clearly suggests I need to adjust the TCP (and ssh) keepalive time on the servers in question in order to reduce these errors. But what is the appropriate value I should use? Assuming I have machines on both sides of the firewall between which I can make a connection, is there a way to measure what the time limit on TCP connections might be for this firewall? In theory, I would send a packet with gradually increasing intervals until the connection is lost. Any tools that might help (free or open source would be best, but I'm open to other suggestions)? The appliance is not under my control, so I can't just get the value, though I am attempting to ask what it currently is and if I can get it increased.

  Read the article

• L2TP Site to Site VPN issues

  - by Chris Lively

  I have a windows 2008 r2 server that needs to establish a VPN connection to a remote VPN server. We're using the L2TP protocol with a pre-shared key. I initially used the New Demand Dial interface wizard. Then I went into properties on the interface and set the type of VPn to L2TP/IPSec and put the key under the advanced settings. The error I received when attempting to connect is: An error occured during connection of the interface. A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.

  Read the article

• refresh windows network performance counters in command line

  - by michalv82

  I am testing a USB device connected to a windows PC. When the device is connected then windows has another network interface going through the device. I need to get the bytes transffered for that specific interface, basically I need the data shown in the networking tab in the task manager for my interface adapter. I found this question which helped to get this info: ms windows network activity bytes send and receive in command line However I have a problem when I run multiple tests - each time I disconnect and connect the device there's another line for the interface, like below. In the task manager networking tab I only see one record for my interface but I don't know how I can know from command line which is the lastest and current instance (it's not like the first line or last line is always the current interface, I noticed it's not consistent): wmic path Win32_PerfRawData_Tcpip_NetworkInterface Get Name,PacketsReceivedPerSec,PacketsSentPerSec,BytesReceivedPersec,BytesSentPersec BytesReceivedPersec BytesSentPersec Name PacketsReceivedPersec PacketsSentPersec 422666370 6317989292 Intel[R] 82579LM Gigabit Network Connection 2715169 8109643 49150 375973 My USB Device 432 568 0 0 My USB Device _2 0 0 0 0 My USB Device _3 0 0 0 0 My USB Device _6 0 0 0 0 Local Area Connection* 9 0 0

  Read the article

• Spawning HTTPD processes

  - by felix001

  Can any confirm how Apache spawns new children ? As in if I connect to a webserver (HTTP 1.0 / no keep alive) and issue a HTTP /GET I will be spawned a new HTTPD child. If then issue another HTTP /GET then a new TCP connection will be built. However will I use the same child process of would I spawn a new one ? Also if I was using HTTP 1.1 (with keep-alive) and reused the same TCP connection, would the httpd process/spawning be any different to that if I wasnt using keepalive ? Thanks,

  Read the article

• Blocked Chrome by Company's Proxy

  - by gol.d.ace

  Chrome has just suddenly being blocked by my company for accessing internet. Instead, IE still works fine. It blocks the connection, the error says that my Chrome connection is timeout & the server is not responding Error 118 (net::ERR_CONNECTION_TIMED_OUT): The operation timed out). I guess the reason behind this is to standardize all user's browser for only using IE for security reason. I have tried to change the user-agent string (--user-agent="... ") so that the Chrome will pretend to be as IE. and yet, still not working! Could anyone shed my problem here? IE is just not comfortable so-called for surfing the web!

  Read the article

• IIS + PHP + Page with lots of images = Intermittent 403 errors

  - by samJL

  I am using an up-to-date Server 2008 R2 Datacenter, running IIS 7.5 and PHP 5.3.6/FastCGI On PHP pages with lots of images (60+), some of the images fail to load It is not always the same images-- on each page refresh an image that worked previously may not load, while an image that did not now does Looking at the Net tab in Firebug reveals that the failing image requests are 403 errors All of the images are located on the server in question, and the images directory has the correct permissions I believe this problem is the result of a limit on requests All of my attempts at researching this problem point to maxConnections setting in IIS, yet mine is set at the highest/default of 4294967295 (maxBandwidth too) I am also running a ColdFusion site on the same IIS installation, and it does not suffer from 403's on pages with lots of images I am left thinking that there is another connection limit (in PHP or FastCGI?) overriding the IIS connection limit I don't see anything that looks like a request limit in the php.ini, what am I missing? Any help would be appreciated, thank you

  Read the article

• wireless dropping out

  - by Sam

  My wireless network connection is dropping out and its driving me nuts. It is weird because it happens at totally random intervals and other devices work while my computer has been dropped. Both my USB dongle and wifi card randomly disconnect from the router and I am unable to connect for a couple of minutes. It is especially irritating because two different adapters are failing at the same time, sounds like a software problem to me, but where? Both my laptop and iPod remain connected when the connection drops. What on earth is happening? I doubt its the router because the other devices would disconnect as well.

  Read the article

• How to connect MTS MBlaze

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

• How to setup a wired local area network in Windows 7?

  - by user883434

  I am using a Lenovo ThinkPad X200 and want to se tup a wired local area network. How could I achieve this? Actually, my question is very simple. I just want to connect to the internet and I have a cable connection at home. So, I just want to plug the cable line to my notebook (x200) so that I can access the internet via the cable. But I dont know how to setup a local area connection in notebook. Since it automatically appear in my desktop, but not in my notebook. Thanks!

  Read the article

• Why is file sharing over internet still working, despite all firewall exceptions for filesharing being disabled?

  - by Triynko

  Every exception in my windows server firewall that starts with "File and Printer Sharing" is disabled (ordered by name, so that includes domain, public (active), and private profiles). The Network and Sharing Center's options for everything except password protected sharing are off. Why would I still be able to access a network share on that server via an address like "\\my.server.com\" over the internet? The firewall is on for all profiles and blocking incoming connections by default. A "netstat -an" command on the server reveals the share connection is occurring over port 445 (SMB). I restarted the client to ensure it was actually re-establishing a new connection successfully. Is the "Password protected sharing: On" option in Network and Sharing Center bypassing the firewall restrictions, or adding some other exception somewhere that I'm missing? EDIT: "Custom" rules are not the problem. It's the "built-in" rules for Terminal Services that was the problem. Can you believe port 445 (File Sharing Port) has to be wide open to the internet to use Terminal Services Licensing?)

  Read the article

• ssl_error_rx_record_too_long error on IIS - site was working, suddenly stopped

  - by JK01

  I am suddenly getting this error connecting to localhost IIS on my development machine. It has been working fine for ages, and now suddenly has this error in Firefox: Secure Connection Failed An error occurred during a connection to localhost. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) I have googled and found no clear explanation. In IE it says: Internet Explorer cannot display the webpage\ In Chrome it says: Oops! This link appears to be broken.

  Read the article

• Enable/disable wireless interface in a bat file

  - by Herms

  Is there a way to enable/disable a wireless network interface via the command line (so I can put it in a bat file)? When I'm in the office I use a wired connection, but Windows still occasionally bugs me about my wireless connection not being connected (even though I turned off the option for notifying me when there's no connectivity). I'm guessing the only way to stop it from bugging me is to disable the interface, but I'd rather not have to go into the network settings every time I need to do so. I'd like to set up a bat file or a shortcut that I can use to enable/disable the wireless (preferably a single one that toggles the current state), and then just set up a keyboard shortcut for that. I just have no idea how to do so from the command line.

  Read the article

• Linux - Block ssh users from accessing other machines on the network

  - by Sam

  I have set up a virtual machine on my network for uni project development. I have 6 team members and I don't want them to SSH in and start sniffing my network traffic. I already have set the firewall on my W7 pcs to ignore any connection attempts from the Virtual Machine, but would like to go a step further and not allow any network access from the VM to other machines on my network. Team members will be access the VM by SSH. The only external port forwarded is to vm:22. The VM is running in VirtualBox on a bridged network connection. Running latest Debian. If someone could tell me how to do this I would be much obliged.

  Read the article

• Cisco: changing VTP mode server/client to transparent

  - by J. Smith

  I have around 40 L2 switches (2960, 3560, 3500, 3750) running in VTP client mode and one L3 switch (6500) running in VTP server mode, all connected together. I would like to switch everything in VTP transparent mode without any interruption of service. I've already test on a poc version with 3 switches (Catalyst 2950, 3560 and 3750). Using serial and SSH connection, it is seems working but i'm not sure it is enough representative compare to the real network. Knowing that the VTP Pruning is enabled, I am wondering what would be the best procedure to proceed the changement. I've read that we could lost connection by keeping it enabled. Should I change the server or clients first? Is it important to change the VTP domain and VTP Pruning parameters?

  Read the article

• Cannot SSH anymore, what went wrong?

  - by lbwtz2

  I use to ssh to a remote server (no rsa-key, just password). Now the server do not accept the connection any more and throw me this error: ssh_exchange_identification: Connection closed by remote host While I can google a little to find a fix I can't figure out what went wrong since I haven't touched anything on the machine since last login. Can you help me find the cause? EDIT: Inspecting the logs I've found these: /var/auth.log /var/log/auth.log:Dec 26 16:40:32 vps sshd[15567]: error: fork: Cannot allocate memory /var/log/auth.log:Dec 26 16:41:05 vps sshd[15567]: error: fork: Cannot allocate memory /var/log/auth.log:Dec 26 16:43:47 vps sshd[15567]: error: fork: Cannot allocate memory /var/log/auth.log:Dec 27 03:20:06 vps sshd[15567]: error: fork: Cannot allocate memory /var/log/auth.log:Dec 27 16:15:02 vps sshd[15567]: error: fork: Cannot allocate memory And in the same span-time I've also found a lot of these: /var/log/auth.log:Dec 26 13:00:01 vps CRON[1716]: PAM unable to dlopen(/lib/security/pam_unix.so): libcrypt.so.1: cannot map zero-fill pages: Cannot allocate memory /var/log/auth.log:Dec 26 13:00:01 vps CRON[1716]: PAM adding faulty module: /lib/security/pam_unix.so What are these?

  Read the article

• 3 SQL Join Concepts to Help You Choose the Right Join

  What do SQL joins and the "teach a man to fish" Chinese proverb have in common? SQL joins, like regular expressions, are one of those commonplace programming tasks in which true success is entirely dependent upon your ability to conceptualize the outcome. Fail to do so and you'll likely wind up spending a few hours in a frustrating round of trial and error. Like regular expressions, the proliferation of online examples has actually contributed to the frustration, providing the equivalent of a day's worth of fish rather than the proverbial fishing pool. The Future of SQL Server MonitoringMonitor wherever, whenever with Red Gate's SQL Monitor. See it live in action now.

  Read the article

• How to Install Broadcom Wireless Drivers (BCM43xx)

  - by Fer1805

  I'm having serious problems installing the Broadcom drivers for Ubuntu. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in Linux, so I would need clear explanations on make, compile, etc. Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. lspci -vnn | grep Network showed: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] hope above info is enough for your help.

  Read the article

• Scripted SOA Diagnostic Dumps for PS6 (11.1.1.7)

  - by ShawnBailey

  When you upgrade to SOA Suite PS6 (11.1.1.7) you acquire a new set of Diagnostic Dumps in addition to what was available in PS5. With more than a dozen to choose from and not wanting to run them one at a time, this blog post provides a sample script to collect them all quickly and hopefully easily. There are several ways that this collection could be scripted and this is just one example. What is Included: wlst.properties: Ant Properties build.xml soa_diagnostic_script.py: Python Script What is Collected: 5 contextual thread dumps at 5 second intervals Diagnostic log entries from the server WLS Image which includes the domain configuration and WLS runtime data Most of the SOA Diagnostic Dumps including those for BPEL runtime, Adapters and composite information from MDS Instructions: Download the package and extract it to a location of your choosing Update the properties file 'wlst.properties' to match your environment Run 'ant' (must be on the path) Collect the zip package containing the files (by default it will be in the script.output location) Properties Reference: oracle_common.common.bin: Location of oracle_common/common/bin script.home: Location where you extracted the script and supporting files script.output: Location where you want the collections written username: User name for server connection pwd: Password to connect to the server url: T3 URL for server connection, '<host>:<port>' dump_interval: Interval in seconds between thread dumps log_interval: Duration in minutes that you want to go back for diagnostic log information Script Package

  Read the article

• VPN Authentication Credentials (Local/Remote Identifiers) For Remote Access VPN

  - by thatidiotguy

  So I am trying to set up a remote access VPN using the free ShrewSoft vpn client: https://www.shrew.net/software I want to use a PSK as the authentication mechanism combined with XAuth so that a connection requires a valid username/pass combo. Under the authentication tab this particular VPN Client however is asking for a Local Identity and a Remote Identity. The options for Local Identity Type are: Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier The options for Remote Identity are: Any Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier My current thinking is that I can use the Fully Qualifed Domain Name provided by the remote firewall for the Remote Identity, but I do not know what it wants for local identity. Just to stress: I am not trying to set up a site to site VPN. Can anybody shed any light on what I am missing here? A screenshot can be provided if that would be helpful. The current error I am getting during the connection is: IKE Responder: Proposed IKE ID mismatch

  Read the article

• Route a specific user's traffic via VPN but still allow local networking

  - by wbg

  So, I want to route certain traffic via a VPN connection and the rest via my normal Internet connection. I want to run several different programs and most of them don't support binding to a specific network interface (tun0 in my case). I've managed to send a specific user's traffic via the VPN following the answers given here: iptables - Target to route packet to specific interface? But unfortunately, when I run a server that connects to the Internet and has a web interface running on a local IP (127.0.0.1/192.168.0.*), all the Internet traffic correctly goes via tun0, but I'm unable to connect to the web interface from a local IP as a different user. When I log in as the VPN-ified user, I can access services running on local IPs, but other users/machines can't access any servers I start. Can anyone point me in the right direction?

  Read the article

• Windows Server 2008 R2 - Can't connect RDP over the Internet

  - by Jonathan DeMarks

  I have two networks: Domain and Public, Domain is a VPN connection and Public is the local connection to the network. This is not a domain controller or a DNS/DHCP server. I can connect via RDP from the local network (192.168.1.), from the VPN network (10.1.2.), and from the VPN network over the internet. I cannot connect from the internet (anywhere besides where the server is VPN'd) Wireshark indicates that the server is getting packets, and the audit log is indicating that the packets are being dropped. Advanced Firewall has explicit options to allow RDP, and has no deny policies. I have also tried turning Firewall off completely to no avail. I'm really lost on this one.

  Read the article

• Sharing VPN access between two computers on the LAN

  - by Axelle Ziegler

  I have VPN access to several machines in my office from my home machine. I'd like to be able to access those machines from another computer on my LAN, without setuping a second VPN access. Both computers are Windows 7 machines. Is there a way for my "main" computer to share its VPN access to another machine on the LAN? How would one setup this share? I don't think "simple" Internet connection sharing fits my needs because: My LAN already has its own DHCP/Router to access the Internet, and I'd like to keep it this way I can't access the Internet through my VPN connection

  Read the article

• Issues trying to download Windows 8.1 using official downloader

  - by Aviral Singh

  I had been trying to download Windows 8.1 ISO from the last 3-4 days but a silly issue is preventing me to download it.As many posts over the internet explain,I tried to use generic keys to download(as I don't have Windows 8),but the installer always shows "We can't connect right now,please check you internet connection.".Isn't it silly?,I have a working internet connection.No matter whatever key I use it always ends at this message.I've tried every single generic key,and almost every key was accepted by the installer as valid,but then the message. Can anyone please explain why is this happening and any workarounds ?

  Read the article

• Uploading to YouTube makes all browser tabs and devices disconnect

  - by fabsenet

  Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

  Read the article

• How to connect to internet 2 or more pcs with an usb wifi adapter

  - by bhaoahd

  In one pc I have an USB Wifi adapter (Realtek RTL8187L Chipset), from there a 10 meters cable to an outdoor antenna. With that I connect to a public Access Point. Now I want to be able to connect more computers to internet using that same connection that comes from the outdoor antenna, what options do I have to do this? I do have another usb wifi adapter with a small omni antenna, and a router encore ENHWI-G/A. This router can be used as a Wifi AP, but it needs a modem that works with the RJ45 connector. Is there a way I could take internet from the outdoor antenna, and create another AP indoor using that router to "repeat" that wifi that comes from the outdoor antenna? If creating this second AP is not possible, should I use some sort of local network between computers, connect my main PC with the outdoor antenna, and share the connection through the lan? (I would really prefer to have a second AP indoor so I can connect other devices like a Palm, but I am not sure how could this be possible with this router and the usb wifi adapter)

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >