Search Results

Search found 16333 results on 654 pages for 'exception safe'.

Page 277/654 | < Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >

• Change the location of the System Temp directory on Windows 2003 Server

  - by skylarking

  In order to update an application on a Windows 2003 Server box, the application calls for 2.0 GB of free space in the System's Temp directory. The OS is on C:\ , and there is only 1 GB of free space there.... The server has a RAID configuration for its data on the system's E:\ . There is over 100GB of free space on E:\ . When I did a set tmp I found that the system's TEMP directory is not surprisingly located on C:\ .... TMP = C:\DOCUME~1\ADMINI~1.DES\LOCALS~1\Temp I assume it is possible to change the System Temp directory to the be located on E:\ ? How is this done, where's a good place to stick it, and is it safe to do this ?

  Read the article

• BSOD on windows 7 with SSD during boot after improper shutdown

  - by Bob

  I have a BSOD on windows 7 with SSD during boot after improper shutdown (while windows animation logo is moving). The computer restart imediatly after BSOD, and windows proposes to launch startup repair (if i do it, it takes +-5min and fixes the problem : computer starts normally). However, after any new improper shutdown, i got the same problem. Remarks: If i unplug, re-plug the SSD whyle system is shutdown, i have the same problem. If i reproduce the situation with old HDD, i havn't the problem Previously, i had a different problem: BSOD when waking up after sleep, which was fixed by installing drivers (ethernet, usb, graphic card) I have made ram chech and ssd check and found no problems Starting with safe mode after improper shutdown causes a BSOD at loading of classpnp.sys Configuration: System: HP compaq 8510p SSD: OCZ vertex-2 2.5 Boot options: SATA native mode - Enable, HDD transalation mode - LBA-assisted

  Read the article

• Correct way of bringing network interface down in linux

  - by Karolis T.

  For example: $ ifconfig dummy0 up $ ifconfig dummy0 "192.168.1.190 netmask 255.255.255.0" Calling ifconfig with no parameters shows the interface dummy0 Link encap:Ethernet HWaddr b6:1f:f3:92:6d:20 inet addr:192.168.1.190 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::b41f:f3ff:fe92:6d20/64 Scope:Link UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:1050 (1.0 KiB) How can I bring the interface down so that it doesn't show up in ifconfig ifconfig -a ifconfig dummy0 without rmmod dummy because dummy is used just for example purposes. If there is no way to do that, what "throw-away" IP could I set to it and be safe from any trouble? like $ ifconfig dummy0 down $ ifconfig dummy0 0.0.0.0

  Read the article

• Disable mod_security on Dreamhost, for a single cgi script

  - by Hippyjim

  Hi I've searched around a lot, and tried various tweaks to .htaccess files to try to turn off mod_security for a particular cgi script (uber uploader) but it doesn't seem to have any effect. The most popular one I see rehashed all over the web is: # Turn off mod_security filtering. SecFilterEngine Off # The below probably isn't needed, # but better safe than sorry. SecFilterScanPOST Off Which looks relative simple to me - if "SecFilterEngine" is in some way related to mod_security of course. Shame it has absolutely no effect! Does anyone have a suggested way I can simply disable it for a request to any file in my cgi-bin directory?

  Read the article

• Which versions of C++ redistributables can I remove?

  - by Marnix

  I have a number of Microsoft Visual C++ 2005 and 2008 Redistributable and I would like to know which ones are safe to remove, because there are actually more than 10 installed on my computers. Microsoft Visual C++ 2005 ATL Update kb973923 - x64 8.0.50727.4053 Microsoft Visual C++ 2005 Redistributable Microsoft Visual C++ 2005 (x64) Microsoft Visual C++ 2008 ATL Update kb973924 - x64 9.0.30729.4148 Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17 Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17 Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148 Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4974 Microsoft Visual C++ 2010 x64 Runtime - 10.0.30319 It could be that these versions are all different, but a confirmation of that is fine for me as well. Thanks in advance. PS. I'm using an x64 machine one windows 7.

  Read the article

• reaching 99.9999% uptime

  - by user35204

  I am currently developing a project which is mission-critical. The actual domain name is registered with 1 & 1 and I plan on purchasing DynDNS Custom DNS service (which has 5 different geographical locations for DNS) and then another secondary DNS service to make sure my DNS is as failover safe as possible. Does it matter that the registration is with 1 & 1 - are they a weak link in the chain? All I really use them for is to say that DynDNS is my primary DNS nameserver and then my secondary DNS is my other nameserver. I can transfer the registration to DynDNS - Im just not sure if it really matters or not. Thanks

  Read the article

• Wireless Keyboard/Mouse: Should batteries be removed when not in use?

  - by abel

  I recently bought a Logitech Wireless Keyboard and mouse. I use it almost daily but for a couple of hours only. The keyboard has 2 AAA batteries and the mouse has 1 AA battery. The box mentions that the keyboard has a 24 month battery life and the mouse has a 5 month battery life. Should I keep the batteries in the keyboard/mouse, when they are not in use?Is it safe? Does the battery life mean 24 months of continuous usage or 24 months of average usage?

  Read the article

• Laptop harddisk produces clicking sound

  - by Alfred James

  This happens when I am booting up into windows, shutdown or things in which I access the harddrive excessively. It doesn't happen all the time. I have checked it with "Crystal disk Info" and it displays no problem, and shows HDD to perfectly fine. Should I be worried about my HDD? I have Hitachi HDD in laptop. Some times my harddrive temps reach upto 43C while watching movies or playing games. What are the normal temps, which are safe for HDD to operate and increase the lifetime of HDD. Thanks

  Read the article

• Vista won't boot - just get black screen

  - by DisgruntledGoat

  When I boot into Windows Vista (Ultimate), I just get a black screen (with the mouse visible and working). If I run in safe mode, it seems to pause for a while when loading crcdisk.sys. A lot of research says it could be a problem with the hard drive, but I dual boot Ubuntu and that works fine and I can still see and use the Windows partition absolutely fine from Ubuntu. I tried using the "startup repair" option on the Vista install disk but it didn't detect any problems. I have run chkdsk several times, with this: chkdsk C: /f /r And also drive D (the recycle bin). The first two times it detected and fixed errors on the C drive but now it doesn't detect any errors. Is there anything else that could be causing this problem?

  Read the article

• Mikrotik server networks and Cain & Abel

  - by user269742

  I'm connected to the internet via a mikrotik server network. Recently, I read about that scaring application named Cain & Abel and all the capabilities it offered for malicious users. I don't know if anyone on my network is using or even aware of such application but my questions are: 1- How to protect myself from this program? 2- How to know if someone using such application against me? 3- Is Tor Bundle capable of protecting me from Cain & Abel? 4- If I filled my e-mail password via SSL page, Can Cain & Abel collect it? 5- Is it safe to use SKYPE or Yahoo Messenger voice chat if some one using Cain & Abel on my network?

  Read the article

• Transfer nearly an entire file system to a fresh install as smoothly as possible

  - by Xander

  I've got a friend who needs his computer working in just a few hours. His files are safe, however, he managed to corrupt his main install of Windows 7. My plan is to go in with a Linux disk, copy his C:\ do a backup drive I've got and then reinstall. Restoring many of his files will be pretty simple (such as documents and such), however, things such as applications won't transfer as easily. Is there any easy way to transfer applications such as MS Office (which he needs in the morning) or other commercial software packages without having to go through the hassle of locating the keys and reinstalling them completely? I don't think just moving them over will work just because of the fact that I'm sure much of that is stored in the registry (validation stuff and such). Anyways, quick responses would be super nice! Also, additional help would be great!

  Read the article

• How do I create a calendar appointment from an e-mail in Outlook 2011?

  - by Jeff O

  How do I create a calendar appointment from an e-mail in Outlook 2011 for Mac? In Windows, the e-mail content and attachments are carried over just by dragging and dropping. Dragging and dropping on the Mac doesn't work. Is there any other function to take an e-mail and make it a calendar appointment? I'm trying to avoid emailing it to myself. Edit: Since someone went to the trouble to make email2task, is it safe to assume this feature is not available otherwise?

  Read the article

• Can I configure mod_proxy to use different parameters based on HTTP Method?

  - by Graham Lea

  I'm using mod_proxy as a failover proxy with two balance members. While mod_proxy marks dead nodes as dead, it still routes one request per minute to each dead node and, if it's still dead, will either return 503 to the client (if maxattempts=0) or retry on another node (if it's 0). The backends are serving a REST web service. Currently I have set maxattempts=0 because I don't want to retry POSTs and DELETEs. This means that when one node is dead, each minute a random client will receive a 503. Unfortunately, most of our clients are interpreting codes like 503 as "everything is dead" rather than "that didnt work but please try that again". In order to program some kind of automatic retry for safe requests at the proxy layer, I'd like to configure mod_proxy to use maxattempts=1 for GET and HEAD requests and maxattempts=0 for all other HTTP Methods. Is this possible? (And how? :)

  Read the article

• How to best migrate one Windows 2008 R2 / SharePoint / Exchange / Terminal Services (All-in-one) int

  - by MadBoy

  Hello, My client has one machine with Windows 2008 R2 and everything on it. By everything I mean AD, DNS, SharePoint 2010 Standard, Exchange 2010 Standard, Terminal Services, Office 2010 and a bunch of additional apps. Everything stands on I7 x 2 and 36gb ram for 7 people total. I've decided that we should virtualize it and split things into 4 VM's and keep host only with Hyper-V installed to host all the machines. What problems should I expect? What good advices can you give. My plan is that when i move everything to VM's i will move vm's to safe place and format the host as it has a lot of really bad things happening on it. But this also means that everything will be wiped from current solution so I have to be sure that Exchange etc will work when host gets wiped. MadBoy

  Read the article

• Why times elapsed connecting to a server are different?

  - by user1634619

  I have a small program which connects to a server of my choice and measures the time elapsed to do so. Each time I run it it returns different result. My question is what does this time depend on ? Network congestion for one. If I choose a server that has multiple addresses e.g. google.com the length of physical link may differ from time to time ? Is it safe to assume that it also affects connection time ? Are there any other factors in place ?

  Read the article

• Is there a command line (or autohotkey) way of dismounting a USB drive?

  - by justintime

  I find dismounting a USB drive takes far too many mouse clicks for my liking. Is there are command line way of doing it (XP and Vista)? Addition I have an eye condition that makes hand mouse coordination difficult so any suggestion that there aren't too many clicks will be downvoted as not answering my question. However I use AutoHotkey a lot and one use case would be to call it from an AHK script. So if there is a way to code it in AHK that will do. Added this to the tags. Further question - is it safe to remove a disk when the computer is a. on Standby or b. Hibernated. I recall that W2000 got uspet if you pulled a disk from a hibernated machine. Or is it better to explicitly dismount or sync before you hibernate or standby - prabably in a script.

  Read the article

• UFW: force traffic thru OpenVPN tunnel / do not leak any traffic

  - by hotzen

  I have VPN access using OpenVPN and try to create a safe machine that does not leak traffic over non-VPN interfaces. Using the firewall UFW I try to achieve the following: Allow Access from LAN to the machine's web-interface Otherwise only allow Traffic on tun0 (OpenVPN-Tunnel interface when established) Reject (or forward?) any traffic over other interfaces Currently I am using the following rules (sudo ufw status): To Action From -- ------ ---- 192.168.42.11 9999/tcp ALLOW Anywhere # allow web-interface Anywhere on tun0 ALLOW Anywhere # out only thru tun0 Anywhere ALLOW OUT Anywhere on tun0 # in only thru tun0 My problem is that the machine is initially not able to establish the OpenVPN-connection since only tun0 is allowed, which is not yet established (chicken-egg-problem) How do I allow creating the OpenVPN connection and from this point onward force every single packet to go thru the VPN-tunnel?

  Read the article

• port is not open in torrent client even though it was forwarded

  - by aukxn

  I have a problem with port forwarding with my torrent, port check tool says that it open, the firewall exception as well. But with the test by the client not say so. I don't know why. Can anybody help me fix me this problem, the download and upload speed with torrent is very slow. ![enter image description here][1] I don't have enough reputation to post images so here is the link of the image http://i.stack.imgur.com/tgOdr.png http://i.stack.imgur.com/OgjX4.png

  Read the article

• AWS EC2: How to determine whether my EC2/scalr AMI was hacked? What to do to secure it?

  - by Niro

  I received notification from Amazon that my instance tried to hack another server. there was no additional information besides log dump: Original report: Destination IPs: Destination Ports: Destination URLs: Abuse Time: Sun May 16 10:13:00 UTC 2010 NTP: N Log Extract: External 184.xxx.yyy.zzz, 11.842.000 packets/300s (39.473 packets/s), 5 flows/300s (0 flows/s), 0,320 GByte/300s (8 MBit/s) (184.xxx.yyy.zzz is my instance ip) How can I tell whether someone has penetrated my instance? What are the steps I should take to make sure my instance is clean and safe to use? Is there some intrusion detection techinque or log that I can use? Any information is highly appreciated.

  Read the article

• LGA 1155 or LGA 2011? Which has a brighter future?

  - by Langdon

  I'd basically like to rehash this question, only 22 months later. The last system I built was in 2006, shortly after AMD came out with socket AM2. I was able to upgrade the processor on it 3 times and would love to do the same with my next computer. Since AMD seems to be lagging, I'm going for Intel this time. I've read that Intel changes chip sets all the time, so there's no safe bet. I also read (1 comment on 1 forum) that said LGA 2011 will have 8-core support, but LGA 1155 won't, which leads me to believe that LGA 2011 might be a better choice. Anyone have any good advice for me?

  Read the article

• NTFS Error - file system structure is corrupt and unusable

  - by SomeGuy

  My Windows 7 (64) keeps completely locking up, and I have to hold the power button to shit it down. Event logs are showing EventID 55. I realize that this can be a warning sign of an impending disk failure, but my data on this machine is safely backed up and I don't feel like taking the time to replace the drive right now. When I have seen this problem before, I have been able to delete the offending folder with a Linux Live CD. (When CHKDSK /F didn't work). In this case, the folder is from VSS. I assume this is from Crashplan, my online backup provider. What are the ramifications of deleting this folder from Linux? Is it safe to do? "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolumeShadowCopy26."

  Read the article

• ZFS: RAIDZ versus stripe with ditto blocks

  - by RandomInsano

  I'm going to build a ZFS file server from FreeBSD. I learned recently that I can't expand a RAIDZ udev once it's part of the pool. That's a problem since I'm a home user and will probably add one disk a year tops. But what if I set copies=3 against my entire pool and just throw individual drives into the pool separated? I've read somewheres that the copies will try and distribute across drives if possible. Is there a guarantee there? I really just want protection from bit rot and drive failure on the cheap. Speed's not an issue since it'll go over a 1Gb network and at MOST stream 720p podcasts. Would my data be guaranteed safe from a single drive failure? Are there things I'm not considering? Any and all input is appreciated.

  Read the article

• How to resolve `bootpd` crashing constantly on Mac OS X 10.6.4 Snow Leopard Server?

  - by morgant

  I've got a Mac Pro running Mac OS X 10.6.4 Snow Leopard Server and it's recently started getting numerous 'kNetworkError's in Server Admin.app when viewing services. It's acting as a gateway w/NAT and has been so for quite some time. There is one glaring issue, bootpd crashes all the time with the following errors in `/var/log/system.log/: Aug 12 16:54:59 servername bootpd[3572]: server starting Aug 12 16:54:59 servername bootpd[3572]: server name servername.domain.tld Aug 12 16:54:59 servername bootpd[3572]: interface en0: ip 10.0.1.9 mask 255.255.255.0 Aug 12 16:54:59 servername bootpd[3572]: bsdpd: re-reading configuration Aug 12 16:54:59 servername bootpd[3572]: bsdpd: shadow file size will be set to 48 megabytes Aug 12 16:54:59 servername bootpd[3572]: bsdpd: age time 00:15:00 Aug 12 16:54:59 servername bootpd[3572]: [3572] detected buffer overflow Aug 12 16:54:59 servername com.apple.launchd[1] (com.apple.bootpd[3572]): Job appears to have crashed: Abort trap Aug 12 16:54:59 servername com.apple.ReportCrash.Root[3571]: 2010-08-12 16:54:59.828 ReportCrash[3571:2807] Saved crash report for bootpd[3572] version ??? (???) to /Library/Logs/DiagnosticReports/bootpd_2010-08-12-165459_localhost.crash It is correctly configured to serve DHCP through en1 (not en0), the "LAN" port. This happens even with no hardware (even switches) connected to the "LAN" port. There are no DHCP clients listed. Oddly, the "Overview" shows 1 static map, but nothing is listed under "Static Maps" and there are no "Computers" in Open Directory. /var/db/dhcp_leases is empty. /Library/Logs/DiagnosticReports/bootpd_2010-08-12-165459_localhost.crash is as follows: Process: bootpd [3572] Path: /usr/libexec/bootpd Identifier: bootpd Version: ??? (???) Code Type: X86-64 (Native) Parent Process: launchd [1] Date/Time: 2010-08-12 16:54:59.713 -0400 OS Version: Mac OS X Server 10.6.4 (10F569) Report Version: 6 Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Crashed Thread: 0 Dispatch queue: com.apple.main-thread Application Specific Information: __abort() called Thread 0 Crashed: Dispatch queue: com.apple.main-thread 0 libSystem.B.dylib 0x00007fff803c13d6 __kill + 10 1 libSystem.B.dylib 0x00007fff80461913 __abort + 103 2 libSystem.B.dylib 0x00007fff80456157 mach_msg_receive + 0 3 libSystem.B.dylib 0x00007fff803b92cf __strncpy_chk + 14 4 bootpd 0x0000000100014e5d PLCache_read + 782 5 bootpd 0x0000000100004a3d BSDPClients_init + 68 6 bootpd 0x00000001000053b5 bsdp_init + 2396 7 bootpd 0x000000010000200b S_update_services + 1228 8 bootpd 0x0000000100002344 S_server_loop + 571 9 bootpd 0x0000000100003963 main + 1766 10 bootpd 0x0000000100000984 start + 52 Thread 0 crashed with X86 Thread State (64-bit): rax: 0x0000000000000000 rbx: 0x00007fff5fbfe220 rcx: 0x00007fff5fbfe218 rdx: 0x0000000000000000 rdi: 0x0000000000000df4 rsi: 0x0000000000000006 rbp: 0x00007fff5fbfe240 rsp: 0x00007fff5fbfe218 r8: 0x0000000000000001 r9: 0x0000000100114280 r10: 0x00007fff803bd412 r11: 0xffffff80002e1680 r12: 0xffffffffffffffff r13: 0x00007fff5fbfe330 r14: 0x00007fff5fbfe33b r15: 0x00007fff7009bec0 rip: 0x00007fff803c13d6 rfl: 0x0000000000000202 cr2: 0x000000010004c000 Any thoughts or suggestions as to resolving this?

  Read the article

• Windows xp problems

  - by anca

  I had problems with web virus cake 3.00 and I downloaded Malwarebytes Anti-WALWARE, I got rid of that virus but I did other problems. When I open my PC appears to skype error "exception in module Skype.exe at 0013CE7D.The EOleSysError RPC server is unavailable" and another one "Error in C: \ WINDOWS \ system32 \ Nvcpl.Dll Missing entry: NnStartup" when I install / uninstall a program says "Windows Installer service Could you not be accessed. This CAN occure if you are running Windows in safe mode, or if the Windows Installer is not corectly installes. Contact your support personnel for assistance. I have tried many "solutions" but nothing worked. Please HELP! It windows xp sp 2

  Read the article

• How to back up a network volume to my Time Capsule?

  - by Mike

  I have a Time Capsule that I'm using for my backups. I have a network volume (coincidentally on the same time capsule) that I'd like to back up as well. How can I tell Time Machine to back up network volumes in addition to my main laptop hard drive? PS: yes, I know this setup isn't ideal. It'll incur 2x network overhead when backing up the network volume, plus my data won't be safe in the event of a drive failure since both copies will be on the same disk. However, it will give me some small amount of safety in the event I accidentally delete files on the network volume, among other things.

  Read the article

< Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >