Search Results

Search found 53464 results on 2139 pages for 'find and replace'.

Page 277/2139 | < Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >

• Why PowerConnect and Juniper are so rare ? Why do enterprises stick with Cisco ?

  - by Kedare

  Hello ! I have a little question, I'm actually studing in IT in France, and when looking on alternative on the very [...] very expensive Cisco equipment, I've found Juniper and DELL PowerConnect pretty attractive on features and price, but I rarely see something else than the classics Cisco/LinkSys, HP Procurve and Netgear.. Why it's so rare to find those switch ? They looks really great but... I've never seen any Juniper or Powerconnect... Why do enterprises stick with the expensive Cisco ? I've tried to find how to buy both, it's quite easy with PowerConnect, everything is on the DELL website, but it looks it's very hard to find Juniper equipment in France :( Thank you !

  Read the article

• How to troubleshoot if a zip file is valid or if it is big file size to be unzipped ?

  - by mireille raad

  Hello , I am trying to unzip a file with the size of 2GB I am getting the following error : unzip CLTE_C_08.zip Archive: CLTE_C_08.zip End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. unzip: cannot find zipfile directory in one of CLTE_C_08.zip or CLTE_C_08.zip.zip, and cannot find CLTE_C_08.zip.ZIP, period. After some googling, some people say that this error is because the file is too big, others say because file is corrupt, others say that it could be a not unix archive. So my question , how to find out if file is valid archive file on my Centos and what is the command/trick to uncompress big files ( if any ) Thanks in advance :)

  Read the article

• “yourdomain/start is not the same thing as yourIP/start in Apache”

  - by user1883050

  Let's say you're trying to get a CMS up and going. And say you're supposed to find a Start Page at "www.yourdomain.com/start" But you don't have a domain name yet. You only have an IP address (yourIPaddress). Apache is visibly running at yourIPaddress. So you look in "yourIPaddress/start" And you don't find anything there, just a 404 page. And the person who installed it for you tells you: "In Apache, yourdomain/start is not the same thing as yourIP/start. Please read up on Apache server configuration to figure this out. And that's all the help I can give." My question is: what concepts (re: Apache configuration) should I read up on so that I can find the start page? Thoughts?

  Read the article

• How to enable Sqlite on a Mac OS X Mavericks [migrated]

  - by sehummel

  I upgraded my Mac with OS X Mavericks last week. It appears to have taken away support for Sqlite -- not Sqlite3, but sqlite. I need that for a website I work on. I went to Sqlite's website, but all I could find was older versions of Sqlite3. Where can I find a version of Sqlite? I've been through the php.ini and can only find one reference to sqlite. In short, how do I get Sqlite support on my Mac? I have Sqlite3 enabled and the issue isn't going away. I uncommented pdo_sqlite in the php.ini and I still have the issue.

  Read the article

• Navigate to a virtual member from the member that overrides it

  - by axrwkr

  Using visual studio, in the editor window, I am able to navigate from the usage of a member to the line and file where it is declared by pressing F12 while the cursor is over that member by or right clicking on the member and selecting "Go To Definition". I would like to find a way to navigate from an override member to the base class member that it overrides. For example, if I have the following class with one method public class SomeClass { public virtual void TheMethod() { // do something } } An I override that method somewhere else in the project or solution similar to the following public OtherClass : SomeClass { public override void TheMethod() { // do something else } } I want to navigate from the declaration of TheMethod in OtherClass to the declaration of TheMethod in SomeClass Is there a way to do this? I've found that I can find the definition of the member in the base class by pressing Shift + F12 (Find all References) and then looking through the list occurances, this works fine most of the time, since the list isn't usually that long but it would be much better to have a way to go there directly.

  Read the article

• FTP Logs in IIS 7.5

  - by Jacob84

  I know this is weird, but the thruth is that I can't find the FTP logs in one IIS 7.5 Server. In the IIS Management Console, I've gone to the server, click on FTP Logging that appears inside FTP group (with other options like FTP Messages and FTP Request filtering). Seems that the configured folder for logs is: C:\InetPubFolder\logs\LogFiles If I go there, I can find a lot of folders with the structure W3SVC#, where # it's a number. They all contain logs, but they are HTTP logs, plenty of GET and POST verbs. Am I missing something? The server contains a lot of domains and It's hard to find.

  Read the article

• Get the interface and ip address used to connect to a specific host (ip)

  - by umop

  I'm sure this has been asked and answered before, but I wasn't able to find it, so hopefully this will at least link someone to the right place. I want to find out my local interface and ip address used to reach a certain host. For instance, if I had 3 adapters connected to my box and they all three went to different networks, I'd like to know which of the three (specifically, its ip address) is used to reach my.local.intranet (in this case, it would be a vpn tunnel interface). I suspect this is a job for ifconfig or traceroute, but I haven't been able to find the correct switches. I'm running OSX 10.7 (Darwin) Thanks!

  Read the article

• Syncronization inside the same PC

  - by FGO

  Hi, I work in a company without a server and operating in diferent countries. Because of this we work on a virtual office basis and share files through a virtual server called Drop Box. I'm the controller of this virtual server and find it to be incomplete. We work on levels of permission so I invite access to users for 3 possible levels and find sometimes that I need to have a specific folder inside one mother folder to be inside 2 levels. The only way I can find to make my life easier is to automatically syncronize specific folders between diferent mother folders, but I don't know how to do this in windows 7. Can anyone give me a hint? Thanks

  Read the article

• Navigate to a virtual member from an overriden member in the derived type

  - by axrwkr

  Using visual studio, in the editor window, I am able to navigate from the usage of a member to the line and file where it is declared by pressing F12 while the cursor is over that member by or right clicking on the member and selecting "Go To Definition". I would like to find a way to navigate from an override member to the base class member that it overrides. For example, if I have the following class with one method public class SomeClass { public virtual void TheMethod() { // do something } } An I override that method somewhere else in the project or solution similar to the following public OtherClass : SomeClass { public override void TheMethod() { // do something else } } I want to navigate from the declaration of TheMethod in OtherClass to the declaration of TheMethod in SomeClass Is there a way to do this? I've found that I can find the definition of the member in the base class by pressing Shift + F12 (Find all References) and then looking through the list occurances, this works fine most of the time, since the list isn't usually that long but it would be much better to have a way to go there directly.

  Read the article

• How to troubleshoot if a zip file is valid or if it is big file size to be unzipped ?

  - by mireille raad

  Hello , I am trying to unzip a file with the size of 2GB I am getting the following error : unzip CLTE_C_08.zip Archive: CLTE_C_08.zip End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. unzip: cannot find zipfile directory in one of CLTE_C_08.zip or CLTE_C_08.zip.zip, and cannot find CLTE_C_08.zip.ZIP, period. After some googling, some people say that this error is because the file is too big, others say because file is corrupt, others say that it could be a not unix archive. So my question , how to find out if file is valid archive file on my Centos and what is the command/trick to uncompress big files ( if any ) Thanks in advance :)

  Read the article

• Converting or playing a .264 video file?

  - by Dan

  I recently bought a Chinese brand DVR (to record security cams). The DVR exports the video files with a ".264" extension. This is my first time ever dealing with this video format. Anyhow I've been trying to convert the videos to any other format so it will be easier to watch the videos. The problem is that I could only find one program that can convert and play those files which is Elecard studio something, and even that Elecard studio thing is having trouble with these files, some of them are just making it crash so I can't convert them. I've tried to find some other programs but I couldn't find anything that can actually play those files. How can I play or convert these files to another format?

  Read the article

• How to recover from locked down XP Home computer

  - by Chris

  We've got a Kiosk machine provided to us by a manufacturer. The video card is flaky, so I want to replace it with another card we have on hand, rather than shipping across the country. The problem is that they have policies in place that locks the system down to a point where only the manufacturers demo works on the computer so I can't install drivers for the newer card. I know pretty much nothing about windows policies or the policy editor. Am I fighting a losing battle trying to replace thi scard?

  Read the article

• how to make a small image become really huge

  - by DennyHalim.com

  all webmaster should already know about hotlinking stuffs. and we know how to ban those bad referer too... but i want to get revenge... i want to replace the hotlinked images with one huge image with few megs in size. i have found one good image. yet it less than 100k. i already use it to replace all bad hotlinkers. how can i convert this image to become few megs?

  Read the article

• Help me convert my gaming headset plugs (mic & stereo sound) to a single 2.5mm monaural plug

  - by Flotsam N. Jetsam

  I have a seldom used piece of computer hardware I'd like to connect a gaming headset to. The headset has two 3.5mm plugs (mic and sound) like this: The jack I need to plug into is a 2.5mm monaural (don't ask me why--I know it sounds goofy but it's for someone else who's very picky). I googled a few different ways but I could only find splitters such as this for going from 2 x 3.5mm to 1 3.5mm. If I could find one that could combine it properly to 1 3.5mm, I could then find a 3.5mm to 2.5mm adapter. I know I could probably vivisect and work something out, but I need it to be very clean. Any ideas?

  Read the article

• Not able to output to file in the Windows command line

  - by Sachin

  In the following code, I need to take the path and size of folder and subfolders into a file. But when the loop runs for the second time, path and size are not getting printed to the file. size.txt only contains the path and size of the 1st folder. Please somebody help me. @echo off SETLOCAL EnableDelayedExpansion SET xsummary= SET xsize= for /f "tokens=1,2 delims=C" %%i IN ('"dir /s /-c /a | find "Directory""') do (echo C%%j >> abcd.txt) for /f "tokens=*" %%q IN (abcd.txt) do ( cd "%%q" For /F "tokens=*" %%h IN ('"dir /s /-c /a | find "bytes" | find /v "free""') do Set xsummary=%%h For /f "tokens=1,2 delims=)" %%a in ("!xsummary!") do set xsize=%%b Set xsize=!xsize:bytes=! Set xsize=!xsize: =! echo.%%q >> size.txt echo.!xsize! >> size.txt )

  Read the article

• is there a cheatsheet for linux commands to save your system?

  - by Asaf

  I've recently lost my window options, had to somehow manipulate my way to Xchat and ask some people how do I get it back (it was metacity --replace, and after I decided to stop the command and run it in background the X was completely useless so I had to do killall -u user). And that was after the internet connection stopped working for some reason (might've been the ISP) ..The thing is, after using linux a long time, I still get the feeling that on dire situations, I don't know the good tricks (stuff like metacity --replace) I feel like a really need like a "rescue" cheatsheet for things like "how to save the X no matter what without pressing reset" and "how to reset the system to "normal state"" "how to connect to the internet through the command line" "how to monitor what the X is doing" (using ubuntu linux 10.04 btw)

  Read the article

• Make Google Chrome "Application" Windows Use High-Quality Icons in Windows 7

  - by The How-To Geek

  Whenever I use Google Chrome's "Create Application" shortcut (which I heavily use, and recommend), the icons shown on the Windows 7 taskbar are really blurry, probably the result of the 16x16 favicon being stretched out. I'd like to be able to replace these with another, high-quality icon, but even when I replace the cached file, it doesn't update for some reason. For reference, here's the path to the icon, for Gmail, at least. I'm also using the latest Dev channel version of Chrome. %USERPROFILE%\AppData\Local\Google\Chrome\USERDA~1\Default\PLUGIN~1\GOOGLE~1\mail.google.com\https_443\icons#desktop\

  Read the article

• Does Citrix XenServer have storage Migration

  - by Entity_Razer

  I'm trying to find out. I can't seem to find a defenitive yes / no answers so I thought I'd ask the ServerFault community this simple question: Does XenServer (in any version) support Storage migration such as VMWare's Storage VMotion capability, or Hyper-V's storage migration ? I'm trying to do a comparative study of all platforms but I can't find a website (preff. Citrix supported or any other "legit" source) where it say's a defenitive yes or no. Anyone able to answer this one for me ? Cheers !

  Read the article

• Files and folders disappeared from my desktop

  - by Rob

  Suddenly all files, folders and icons that were on my desktop have disappeared. tried making "show hidden files", no luck. tried using recovery software, but it did not find any of this files, so I assume they were not deletes. c:/Users/<myname>/Desktop does look empty from the Explorer, as well as from cmd. installed MalwareBytes, it did find and remove some malware, but it didn't seem to help. used RogueKiller and it did find some suspicious registry called "HideDesktopIcons". ¤¤¤ Registry Entries : 4 ¤¤¤ [HJ DESK] HKCU\[...]\ClassicStartMenu : {59031A47-3F72-44A7-89C5-5595FE6B30EE} (1) -> REPLACED (0) [HJ DESK] HKCU\[...]\NewStartPanel : {59031A47-3F72-44A7-89C5-5595FE6B30EE} (1) -> REPLACED (0) [HJ DESK] HKCU\[...]\ClassicStartMenu : {20D04FE0-3AEA-1069-A2D8-08002B30309D} (1) -> REPLACED (0) [HJ DESK] HKCU\[...]\NewStartPanel : {20D04FE0-3AEA-1069-A2D8-08002B30309D} (1) -> REPLACED (0) I deleted this registry, rebooted, it only unhid My Computer and User icons, but my desktop stuff is still missing — any ideas what should I do next?

  Read the article

• What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

  - by Tyler

  Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

  Read the article

• Showing name of row instead of excel cell name

  - by Kare

  I am having extremely long formulas over an extremely big sheet. At the moment I am tracking the formulas with the Formula Auditing Tool. However, my idea would be to just replace for example in a formula like this: =IF(AND(ROUND($GX19-SUM(0)/$M$12;2)<=0;$AK$7=1);0;$M$12*$M$22/$K$62 My idea would be to replace the excel cell names with the table row names they are in. Like: =IF(AND(ROUND( "Income" -SUM(0)/ "Debt" ;2)<=0; "Percentage" =1);0; "Investment" * "Debt of house" / "Investment costs" Is there any way to achive sth. like that in excel? I appreciate your inputs!!!

  Read the article

• How to use a D-Link usb network adapter on debian

  - by Barranka

  I have a Debian (squeeze) desktop, and I need to use a D-Link 150 USB Wireless Network Adapter. So far I've done this: $ lsusb ... Bus 001 Device 006: ID 2001:3c18 D-Link Corp. ... After looking for a solution in google, I found that I needed to install the following package: firmware-ralink_0.28+squeeze1_all.deb I've installed it, but Debian doesn't want to find the adapter. When I run lsmod, I can't find what I'm supposed to find: rt2870sta Can you point me in the right direction?

  Read the article

• How to verify if my copy operation is complete in Windows 7?

  - by Tim

  Yesterday, I was leaving some job of copying a directory to run overnight. This morning however, I found the computer had restarted because of Windows Update or something. I was wondering if there is some way to check if the copy is complete? One way I guess would be check the last modified time of the copy, and when the system restarted. But I was wondering where to find the time when the system restarted? I was also wondering if where to find some logging files that have the records. I know Event Viewer, but don't know where to find within it. Other methods are welcome too. I also would like to hear suggestions for other ways to accomplish the copy instead of just simple copy and paste. Thanks and regards!

  Read the article

• Domain controller policies having administrative issues with program installations

  - by russ

  I have an issue with our domain and policies where a user needs administrative rights to install a program and someone provides the credentials for the 'run as admin' or 'run as other user' it will always show an error: Cannot find specified file on the drive. So we cannot install programs for our employees. How I fix it is I add the user to administrators, force a policy update, have them reboot, run as administrator and install it that way. Then remove them after and update the policy. Another way was to right click the install file (.exe/.msi) and add the user and administrator as an owner with full control. Only works when we have the installation file. I have no idea how to fix this and I can't find a relevant thread or QA about this problem. I can only find users having issues on their home computers not on a domain. Any help and threads to read would be great!

  Read the article

• Logitech USB keyboard driver not found on Windows 7 x64

  - by AngCaruso

  I have a Logitech Internet 350 Keyboard which has been working fine on my Lenovo T400 laptop for well over three years. Just within the past week or so, Windows 7 can no longer find the driver for it. There is no custom driver from Logitech for this device -- it uses the generic Windows USB HID driver. The keyboard works just fine from the BIOS (and Linux which I dual boot this machine), but Windows 7 cannot find or load the driver for it. Any ideas? I smell a Windows update problem, but have no idea how to fix it, and I really am not interested in rolling back updates. New Info: I just tested a generic Dell USB keyboard and it worked just find, with Windows immediately recognizing the device and installing the HID keyboard class driver. So, it seems that Windows has decided not to recognize my specific Logitech keyboard device. I still suspect a Windows update issue, but I would love to hear other suggestions.

  Read the article

< Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >