Search Results

Search found 11930 results on 478 pages for 'shared machines'.

Page 277/478 | < Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >

• ISA bus on newer computers

  - by Kevin Ivarsen

  Are there companies that sell new computers that support old ISA bus expansion cards? We have an aging computer running DOS that operates some machinery via an ISA interface board. Updated versions of this board (e.g. PCI, USB) are not available, and I am concerned about the long-term reliability of the 8+ year old computers we currently keep around as backups. If these newer ISA-capable machines exist, are there any general gotchas to be aware of in terms of compatibility with older expansion boards, ability to run DOS, etc.?

  Read the article

• TS connection lost but not local

  - by Owl

  I have an office that is connected to a shared db server and terminal services server, that other offices use as well, through a vpn tunnel. For some reason all workstations in the office will lose connectivity to the remote address but will remain connected to their local internet. I have checked both firewalls to ensure all settings match accordingly. They seem to go down at routine times every day and it doesn't last longer than a minute or two. Any ideas of what this may be? OS: Windows Server 2003R2 Terminal Services 5.2 Symantec Gateway 320 & Symantec Firewall/VPN 100

  Read the article

• Windows Network copy and access denied randomly

  - by The King

  I have a windows 2008 R2 server and I now installed a new bigger HDD into it. I wanted to copy big AVI files to the new server hdd what is shared on the local network. I have write access to the servers hdd and I can successfully copy smaller files to it. But when I copy bigger files more than 500MB randomly on the copy I get Access Deny message. If I use RDP I can copy files through RDP client. I checked error messages at the server but I didn't found any error about this access deny. Because of RDP copy works I don't think that this could be hardware error. I think this is some kind of software setting error. Someone has faced this kind of error? Or somebody has idea what could cause or how to find the root of the problem?

  Read the article

• git-receive-pack : command not found.

  - by Philippe Mongeau

  I made a git repo on a local machine with "git init --bare" and added it as the remote origin on the project on my main computer with ssh: git add remote origin [email protected]:repoName.git I was able to make a commit and push from my main computer to the other computer the day I created the repo, but today i tried and it didn't work. When I did "git push origin" it returned this error: bash: line 1: git-receive-pack: command not found fatal: The remote end hung up unexpectedly The two machines are mac the main one running Leopard and the server one running Tiger. I think it may be realted to the $PATH of git on the server but I'm not sure. i used theses instrution to create my git server: http://blog.commonthread.com/2008/4/14/setting-up-a-git-server

  Read the article

• Multiple .bkf files created in Backupexec 12.5 or 2010 related to heavy I/O?

  - by syuusuke

  Hey everyone, I was wondering if anyone who has used backupexec 12.5 or 2010 have ever experienced multiple .bkf files created for a single job. To describe what I mean by multiple files, the .bkf are being created with random file sizes under 2GB even though I've assigned the setting to chop the file after 10GB size. Some jobs will create 20x .bkf files in 1 job with file chunks ranging from 50MB to 800MB sizes. Is this is a sign of heavy I/O issues? Bandwidth limitations? I'm not sure, I'm here to seek some advices and suggestions. I've setup another backup server with the same exact settings and they seem to create a new .bkf file when 10GB limit has been reached. Although I am backing up different machines but I know my settings are an exact match to the problematic or atleast I think it's a problem.

  Read the article

• Realtime file-level mirroring from local NTFS to network drive

  - by hurfdurf

  We have some data collection machines running WinXP. After a new file is written, we would like to immediately copy the new file to network storage (a NetApp CIFS share) automagically. We need realtime or near realtime copies generated (copy upon filehandle close would be fine -- these are not long-running system logs). Two commercial applications I've found so far are MirrorFile and IBM's Tivoli CDP. Are there any reliable open source programs or simple ways to get Shadow Copy to do something similar? Bonus points if it runs as a service.

  Read the article

• Adobe software does not save to network share

  - by Bart van Heukelom

  I'm running Windows 7 inside virtualbox on a linux host. I have shared my linux filesystem so it's accesible in Windows under \vboxsvr\sharename. I've mounted this share on S:. For most software, it works fine. Adobe software like Photoshop has problems with it though. I can read from S: just fine, but if I try to save something it gives me the message "There are no more files". How can I make it able to write to the share?

  Read the article

• VM: Windows 7 host, Linux guest, VT-d?

  - by chx

  I am sick of the driver issues of Linux. So I am planning to switch to Windows 7 as a host and virtualize my Linux into it. My laptop has integrated Intel graphics and supports VT-d. For speed reasons I would like to assign that card to Linux. Now, Parallels could do it but this page says Note: If you have only one PCIe video adapter, its name will be grayed out in the PCI Devices list and you will not be able to allocate it to your virtual machines. I would be perfectly fine with a headless Windows 7 (I can remotely admin from other computers or just the Linux guest) -- is there any VM software that doesn't have this restriction?

  Read the article

• SSH disconnects active session after 20 minutes

  - by Paramaeleon

  I’ve just set up a new Linux box (OpenSuSE 12.3 on VmWare). Now I stated that my SSH shell sessions are disconnected exactly after 20 minutes, clearly with activity. (Putty: “Network error: Software caused connection abort”) I already set Putty to send keep alives every 64 sec. In sshd_config, I set ClientAliveInterval 50 ClientAliveCountMax 2 and did a deamon reload. Didn’t help. About two minutes after the link breakdown, ssh reports to /var/log/messages: … … sshd[…]: Timeout, client not responding. … … sshd[…]: pam_unix(sshd:session): session closed for user root I don’t encounter this behaviour when connecting to other virtual machines, so I guess the problem isn’t in the network. Any help is appreciated.

  Read the article

• High Load average threshold in linux

  - by user2481010

  My one of friend said that his server load average sometime goes above 500-1000, for me it is strange value because I never saw load average more than 10. I asked him give me some snapshot of top and memory usages, he gave following details: TOP USAGES top - 06:06:03 up 117 days, 23:02, 2 users, load average: 147.37, 44.57, 15.95 Tasks: 116 total, 2 running, 113 sleeping, 0 stopped, 1 zombie Cpu(s): 16.6%us, 6.9%sy, 0.0%ni, 9.2%id, 66.5%wa, 0.0%hi, 0.8%si, 0.0%st Mem: 8161648k total, 7779528k used, 382120k free, 3296k buffers Swap: 5242872k total, 1293072k used, 3949800k free, 168660k cached Free $ free -gt total used free shared buffers cached Mem: 7 6 1 0 0 4 -/+ buffers/cache: 1 5 Swap: 4 0 4 Total: 12 6 6 Total cpu $ nproc 8 my question is it possible load average more than 100 on 8 core,12 GB mem Server? because I read many tutorial,article on load average, it said that thumb rule is "number of cores = max load" according to thumb rule here is max load average 16 then how his server running with 147.37 load server? he said that it is least value (147.37) some time goes more than 500.

  Read the article

• Windows 2008 Server on VMWare (hardware)

  - by Bill

  I want to setup a single server to run a few virtual servers for our datacenter. I do not have a lot of money to spend so I am trying to gain bang for the buck. My budget is around $2,000. So I was thinking about building the following as the VMWare physical server: Intel iCore 7 950 (LGA1366, 4 cores,8 threads) Gigabyte GA-X58-USB3 LGA 1366 X58 ATX Intel Motherboard 24 GB of Viper II Series, Sector 7 Edition, Extreme Performance DDR3-1600 (PC3-12800) CL9 Triple Channel Memory VelociRaptor 300GB 10,000 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive I am planning on running the newest version of VMWare ESXi (64-bit). On these I am planning on running a few various servers: Windows 2008 Server R2 w/ IIS (several custom built ASP.NET Apps) Windows 2008 Server R2 w/ MS SQL 2008 Database Server Linux Web Server w/ Several WordPress Blogs (XAMPP?) Windows 2008 Server R2 w/ IIS (DEV ENVIRONMENT) Windows 2008 Server R2 w/ MS SQL 2008 Database Server (DEV ENVIRONMENT) In your opinion, will this hardware be sufficient to run the above load with room for possible 2-3 more virtual machines (probably lightweight web servers)?

  Read the article

• Computer Invisible On Domain

  - by Giawa

  Good afternoon, I'm sorry that this isn't a programming question specifically, but stackoverflow has been great at answering questions in the past, so I thought I'd give it a shot. One of our Linux users attempted to install Cygwin on our Windows Server 2008 Domain Controller. Now it is no longer possible to browse the domain and see all of the computers. For example, \\my_domain_name will just bring up a username/password dialog box (that will not accept any username or password, even the domain administrator) and no computers will ever be listed. However, I can still connect to computers based on their name or IP address. So \\eridanus or \\192.168.1.85 still work to connect to the shared directories of computers on our network. Does anyone know where I can find these settings? and how I can fix this problem? Thanks, Giawa

  Read the article

• Getting Started with windows server 2008/2012

  - by hbrock

  First let me say, I am a programmer(not a super star) but I want to get more into the system/network administration side of things. This because there are more jobs for system/network administrators in the area I live. Right now I am using virtual machines to learn how windows 2008/2012 works and to build labs with. But how would I prove to an employer what my skill set is with windows 2008/2012? As a programmer I would point to my past projects, code samples, and so on. Thanks for any help.

  Read the article

• How do I install yum on Redhat Enterprise 4?

  - by Bob Cross

  For historical reasons, one of the machines that I manage has a Redhat Enterprise 4 boot disk (among others). Every now and then, we have to boot into RHEL4 to bring up some of the legacy software that we support and connect to. Since it's a fringe system, the Redhat support has long since lapsed and I can't convince myself that it would be worth paying just to get RPMs that I can go and get for myself. That said, the default RHEL tools are heavily biased against letting you do exactly that. I would like to install yum and use that as my package discovery and installation. So, is there an installation guide to integrating yum with an older RHEL 4 system?

  Read the article

• Why using swap file over a SMB/NFS mounted filesystem is not possible in Linux?

  - by Avio

  I'd like to use another machine's unused RAM as swapspace for my primary Linux installation. I was just curious about performance of network ramdisks compared to local (slow) mechanical hard disks. The swapfile is on a tmpfs mountpoint and is shared through samba. However, every time I try to issue: swapon /mnt/ramswap/swapfile I get: swapon: /mnt/ramswap/swapfile: swapon failed: Invalid argument and in dmesg I read: [ 9569.806483] swapon: swapfile has holes I've tried to allocate the swapfile with dd if=/dev/zero of=swapfile bs=1024 (but also =4096 and =1048576) and with truncate -s 2G (both followed by mkswap swapfile) but the result is always the same. In this post (dated back to 2002) someone says that using a swapfile over NFS/SMB is not possible in Linux. Is this statement still valid? And if yes, what is the reason of this choice and is there any workaround to have this working?

  Read the article

• flash h264 mp4 playback pixelation

  - by ndmweb

  Working with converting/playing h264 mp4 videos in flash. I'm converting the video from various source file formats (mostly .mov & .mp4), to h264 mp4 using ffmpeg server side. All seems to be working just fine, except I'm getting a few reports of pixelation of the video when being viewed on windows machines. I've testing just about every browser I can think of on (XP/Vista/7) and could not reproduce. Here's a screenshot: http://i.imgur.com/IK5RV.jpg (sorry for the resolution, was in an email from the client, as I'm unable to reproduce.) Anyone else ever run into this issue? At this point it could be anything in my mind. It seems like an odd bug, and probably a codec issue, or somehow a 32/64-bit issue?

  Read the article

• How do I know when my on-board ethernet is dead? (Realtek 8112L LAN controller w/ AI NET2 )

  - by Usagi

  So I have an ASUS P7P55D-E Pro motherboard. It has an on-board Realtek 8112L LAN controller w/ AI NET2. I suspect that my LAN controller is dead but I don't really know for sure. This is what I know thus far: Everything was working, I have a triple booted system and ethernet was functional under Linux, Win7, and OSX. My ethernet is no longer functional under all three of the operating systems. I was experiencing random momentary internet outages before everything finally went dark. I don't know much about the AI NET BIOS tool but I believe it just checks for ethernet problems before you boot into an operating system. In any case, it doesn't find a connection upon boot. I've checked the connection on a couple of other machines and everything worked fine. I think I already know the answer to my question, but are there any other possible explanations, or is it dead?

  Read the article

• Setting up virtual network in VMware workstation

  - by Saif Bechan

  I am playing around with VMware workstation and am trying to set up a small virtual network. I am having a little trouble with this I hope somebody can help me out. I want to have all the different virtual machines to have different internal IP adresses so I can ping them SSH etc, from within my windows machine. I am directly connected to the internet without a router, so using a bridged connection does not seem to work. The other options NAT and host-only do not seem to work also. I think i need to create a new adapter. I am testing this out with a virtual image of linux debain 5.0 lenny. I have WMware Workstation 7 with virtual network editor. Can anyone guide me in the right direction.

  Read the article

• Good speedtest results, but web pages don't load

  - by dmt0

  I have strange connection problems. Ping and download times are good - speedtest.net showed ping 65ms and download 2.17Mbps. Torrent is working well, giving me up to 300MBps. Webpages are loading very poorly though. They are timing out each time - I'd have to refresh 4-5 times to get any simple page to load. It has been happening consistently for the last few days. Same with different browsers on different machines (same network), Windows and Linux. There is no proxy in the browser. Is there any setting in Windows or in a browser that I can change to help this? Some background: I live on this island in Thailand, where internet connection is through radio to another island and than to mainland - it's very weather dependent, but generally OK. As I mentioned, ping is good. Any input is very appreciated.

  Read the article

• Creating New WebSphere cluster

  - by user154561

  I need to improve WAS perfomance and want to make cluster. I have two separate machines with WebSpphere 7 on it. As I see to do this, I need to add node from my second (remote) WAS to the first one. I try to use "Add node" from console, but without success. It can't find host when I try to execute it. WAS help says about host: Specifies the host name or IP address of the node to add to the cell. A WebSphere Application Server instance must be running on this machine. Does that mean that I cannot add node from a remote machine with "add node?"

  Read the article

• Windows Internet Connection sharing with Mobile Broadband

  - by PaoloFCantoni

  Due to circumstances, I have only got mobile broadband where I am living. I have a small network with a ADSL Router (but which isn't connected to the Internet. I want to use ICS to allow one machine (with the MBB modem) to act as the Internet interface and allow other machines connected to the ADSL router (including a new Android tablet by WiFi) to use the single mobile broadband connection. I've a feeling that my configuration is not valid - as it stands, but I'm not sure. Can some kind soul lead me "by the nose" to getting this working? FWIW The mahcines are all running Windows 7 TIA, Paolo

  Read the article

• How can I unobstrusively backup a few client's email?

  - by tladuke

  This is a small office. Our web/email server is a shared host. In the office we have a windows 2008 box up all the time that runs our NAS and a couple other services. I don't have access to the ISP admin stuff, but I assume it has cpanel or something like that. I can get access if I ask. I want to get email backed up from the server to our NAS without the users having to do anything. I suppose I could set up Outlook on that server with everyone's account, but that's a terrible idea, maybe (would sent mail. The boss uses outlook, but we have Apple Mail and Thunderbird clients too. I guess the important thing is that outlook look at the backups, so boss is happy. Then again, maybe it should be stored in whatever is the most portable format (that will work on NTFS) This is for about 10 users.

  Read the article

• Soft links between samba profile and profile.V2

  - by Alex Rose

  I am currently using a samba server to host windows sessions. For the moment, every machine runs windows XP, but in an upcoming hardware upgrade, I will have new Windows 7 machines installed. The problem is that the user directory changed from XP to 7 (for instance 'My Documents' became 'Documents'). To solve that, samba created a folder called profile.V2, which contains files and folders for Windows 7. Now I would like to link the two profiles folders ('profile' from windows XP, 'profile.V2' from windows 7) so that a user can logon from a XP or 7 machine and still have access to the same files. I tried to create softlinks between folder pairs ('Documents' -­­ 'My documents') and it seems to work. My question is : is it likely to create issues in the future?

  Read the article

• Creating a portable PHP install?

  - by Xeoncross

  I would like to create a folder with a couple versions of PHP that I can start in cgi mode as needed. I use different windows machines for development and I would like to be able to move around computers without needing to install PHP on each one. Something like below F:/PHP /5.3.2 /5.2.8 /5.1.0 Then I could just start each up as needed with something like F:\php\5.3.2\php-cgi.exe -b 127.0.0.1:9000 Which would allow nginx or apache to use the PHP service. This would really help to make my development environment decoupled. Does anyone know how to create a portable PHP install?

  Read the article

• What does the red x icon mean next to a user in folder permissions (Windows 7)

  - by Scott Szretter

  In trying to debug various strange issues on a machine, I found something strange - when I go to C:\Users\administrator and get properties, security tab, it lists the users (the local admin account, system, and 'administrator' which is the domain administrator account). It all looks fine in terms of permissions (full control, etc.) compared to other machines. The one difference is there is a small red circle with an X to the left of the user icon/name. Additionally, there are various folders where it says access denied under there - for example, my documents! Even logged in as the local machine administrator account (which is not named administrator), I am unable to change the permissions - it says access denied. Any ideas what this means and how to fix it? I even tried re-joining the machine to the domain.

  Read the article

< Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >