Search Results

Search found 17856 results on 715 pages for 'setup py'.

Page 278/715 | < Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >

• Windows XP installation problems

  - by Samurai Waffle

  I recently asked a question on here, and thought I had it working... Here is a link to it. Windows XP Installation problems So basically I'm having trouble getting XP installed. To sum it up, a computer I have had a boot sector virus, and I used Darik's Nuke and Boot to wipe the hard drive clean. So the hard drive has nothing on it. I had to try and install Windows through a DOS prompt, because for some reason it won't read it off the DVD. The UBCD is able to look at the files located on the DVD I have in, but I can't boot from it for some reason. So I extracted it to a USB drive, booted to DOS and started the setup process. Here's the weird thing with DOS... It can only find the C: drive. The C: drive in DOS is the flash drive that I have in, running DOS. I can't find the hard drive anywhere! So anyways, after starting the setup process, it copied the files over to the "hard drive" (which took 16 hours because the version of DOS I ran couldn't run smartdrv.exe), and it said the computer had to reboot. So I let it reboot, and it stopped and said there is no boot device. So I popped in UBCD that I have installed on a flash drive, and I discovered that it had copied the Windows files over to the flash drive and not the hard drive. It never asked where it should extract the files... So I toyed around with UBCD, ran a memory test on the hard drive to make sure it was fine, and it came out clean. So I'm stuck now. How can I get this installed? Writing this, I came up with an idea. If I copy the DOS startup files over to the hard drive, would I be able to start DOS from it? If so, I believe that could fix my problems. Any help is greatly appreciated, because I am running out of ideas and am at my wits end with this computer.

  Read the article

• Custom DHCP Server on home network

  - by DanSpd

  Hello I have a computer network at my house which consists of two computers and one server. I have a software on dedicated server which requires direct connection to internet (port forwarding doesn't work for this). So I plan to setup network in following way. link text Please let me know if this will work. How good or bad could this be? Internet Connection: Verizon Fios 25/25

  Read the article

• Custom DHCP Server on home network

  - by DanSpd

  Hello I have a computer network at my house which consists of two computers and one server. I have a software on dedicated server which requires direct connection to internet (port forwarding doesn't work for this). So I plan to setup network in following way. link text Please let me know if this will work. How good or bad could this be? Internet Connection: Verizon Fios 25/25

  Read the article

• sharepoint cannot export all fields to spreadsheet

  - by Colin Dekker

  I am trying to make an export of a list in SharePoint to an Excel spreadsheet. I have added all needed fields to my default view of the list, (like Publishing Start Date / End date) but some fields (like Publishing Start Date / End date) don't show up in Excel. Any idea? EDIT: My setup is a MOSS standard edition, the needed fields (Publishing Start Date / End date) are standard SharePoint publishing fields. The versions of Excel I tried it with are 2003 and 2007

  Read the article

• Blade servers for vm?

  - by jason clark

  We're using VMware on a normal rack mounted server and considering getting another. I see these days I can pick blade enclosures and servers up for relatively low cost and see the term blade and vm mentioned quite a lot. So my question - how would a blade setup work with wmware - is the whole enclosure seen as one big machine and yhr more blades you add the more computing power/resources you get in VMware - or are the just x number of seperate servers? J

  Read the article

• Tomcat experts, /proxy/http/1.2.3.4/index.html to proxy http://1.2.3.4/index.html - possible?

  - by Ben Fletcher

  How to setup tomcat proxy so that, e.g., /proxy/http/1.2.3.4/index.html causes Tomcat to proxy http://1.2.3.4/index.html?

  Read the article

• Monitor and copy file changes on Windows Server 2003 over NFS or CIFS to *nix

  - by davenolan

  Machine A, Windows Server 2003. Machine B, Ubuntu 9.04. Aim is to copy new and updated files as fast as possible from A to B. B can mount A either as CIFS or NFS (Services for Unix NFS server running on A). This is an absolutely time critical operation. What is the best way of achieving this? Note: benchmarked NFS vs CIFS and CIFS was faster and there was less variance in the speed (haven't tuned the NFS setup at all)

  Read the article

• Exchange backup size larger then file size

  - by bladefist

  My backupexec is setup to integrate with exchange, to backup the information store, versus just backing up the data file path. My exchange mdbdata folder is 17 gigs. But my backup exec is backing up 40 gigs worth of data. I have gone through it a million times, and it's strictly backing up exchange information store. I deleted all my backups and started over, to clear the incremental backup old data. Where is all this extra data coming from?

  Read the article

• Noob proftpd questions

  - by Camran

  I have setup my VPS pretty much now, and want to upload some basic files to the server. How is this done in Ubuntu 9.10? I have PuTTY and use the terminal there... Is there any ftp program, like in regular managed hostings, to just upload files with? I was thinking about proftpd, but don't have a clue how to get it to work. I am using my home-laptop with windows xp to command the VPS. Thanks

  Read the article

• Noob proftpd questions

  - by Camran

  I have setup my VPS pretty much now, and want to upload some basic files to the server. How is this done in Ubuntu 9.10? I have PuTTY and use the terminal there... Is there any ftp program, like in regular managed hostings, to just upload files with? I was thinking about proftpd, but don't have a clue how to get it to work. I am using my home-laptop with windows xp to command the VPS. Thanks

  Read the article

• Does the DisplayPort on the Dell UltraSharp U2311H Monitor work with a MacBook Pro?

  - by GeneQ

  I'm thinking of getting the Dell UltraSharp U2311H monitor which apparently comes with a DisplayPort. (I used the word "apparently" because I find DisplayPort support a little bit too good to be true, coming from Dell. But great news nonetheless if it's really true) I plan to connect it to a Mac Book Pro (2010) via a mini DisplayPort to DisplayPort cable. Has anyone tried this setup? Does it work? Thanks.

  Read the article

• Snow Leopard can see Windows shares in Finder but can't connect

  - by Randy Miller

  I have an iMac with the latest version of Snow Leopard on it. I have a NAS drive and a Windows machine that both show up in the Finder's 'Shared' section. However, if I click on them, Finder says "Connection Failed". Clicking on 'Connect As...' gives an error dialog that says "The server 'blah' may not exist or it is unavailable at this time." Points of interest: All machines are receiving their IP/DNS info from the router using DHCP. I have a Mac Mini on the same network that connects to the NAS drive and windows machine perfectly with no config (i.e. worked out of the box). Both Macs are on the same version of Snow Leopard. There is no password required to access the NAS share. I've never setup a WINS server on any machines and all machines are using 'workgroup' by default. I've tried putting "workgroup" in the Mac's workgroup entry and have tried leaving it blank, neither solves the problem. Here are some things I have tried: Finder-Connect To Server: smb:///share. This works, but by name does not. Terminal-mount_smbfs //@/share share. This also works by ip, but not be name, resulting in "mount_smbfs: server connection failed: No route to host". If I put the IP address of the NAS in the WINS server entry in the Mac's network setup, I can connect by name. It obviously seems to be a name resolution error, but I can't figure out why. The only thing that has changed since it used to work is that I got a new router that now gives out DHCP (all machines are dhcp clients) addresses of 192.168.x.x, but used to be 10.0.x.x. I've grep'd through everything that might have saved that old address, but can't find anything. It's also worth noting that the second Mac (the one that connects successfully) was added to the network after the router change. Please let me know if there are additional points of information needed to troubleshoot this further. Thanks, Randy

  Read the article

• SharePoint domain authentication

  - by JL

  I have a local domain controller setup, which is MYDOMAIN.com, and on a seperate local server I have a MOSS site running. the DNS is all working fine but when I try to connect to the MOSS site using domain credentials I can't use syntax: MYDOMAIN/MyAccount it is expecting [email protected] What can I do to fix this issue, so I have normal domain login capabilities like every other sharepoint site out there?

  Read the article

• How to ping ip dslam which is in other subnet

  - by vito

  I want to ping ip dslam, which is in another subnet The connection is like this: MyPc-----Rj45----------Adsl2+ Modem---------Rj11-------Dslam 192.168.1.4----192.168.1.1---172.80.1.3-------------172.80.1.2 -----------------LanSide-----------WanSide--------------------- The modem is set to Static Ip Address Encapsulation. How can I ping ip dslam with this setup, or what do I need to change about the architecture?

  Read the article

• Tomcat and IIS 7 both on different ip's and different ports

  - by n00b

  I have Tomcat and IIS 7 installed together on a Windows 2008 server. The machine has two IPs (134.133.1.1 and 134.133.2.2). I want Tomcat to handle 134.133.1.1, on port 80, and IIS to handle both 134.133.2.2, on port 80 AND 134.133.1.1, on port 443, but can't seem to get the last two together (I can get one or the other by themselves on IIS, along with the first IP address on Tomcat). I have configured Tomcat to successfully listen to ip 134.133.1.1, on port 80 with this configuration; <Connector port="80" protocol="HTTP/1.1" address="134.133.1.1" connectionTimeout="20000" redirectPort="8443" /> I also have a site configured in IIS bound to ip 134.133.1.1, on port 443 (SSL). When I turn on IIS, after Tomcat, I can reach both 134.133.1.1:80 (Tomcat) and 134.133.1.1:443 (IIS) successfully (as desired). The problem now comes when I want to introduce a new site via IIS, at the new ip address. In IIS I have setup a new site at IP 134.133.2.2, port 80. I can not start the site. The event log shows this error; Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine. The data field contains the error number. I think this is because IIS 7 tries to listen to port 80 on all IPs, and it cant because Tomcat is taking port 80 for 134.133.1.1. From reading, the resolution is to specify the IP address you want IIS to bind on port 80. The problem is, when I add 134.133.2.2 to the iplisten list, then I get a 404 when I try navigating to 134.133.1.1:443. I assume this is because IIS is no longer listening to ANY port on 134.133.1.1. How do I resolve this such that IIS will return both sites? EDIT: Per request my IIS binding for site A is 134.133.2.2 on port 80 (http) and 134.133.2.2 on port 443. For site B in IIS, the binding is 134.133.1.1 on port 443 (https). Note the IPs in this example are just for example purposes, but consistent with my setup.

  Read the article

• How do I uninstall mysql on snow leopard osx?

  - by Abhic

  Hello I had installed mysql from the command line when I setup a local web server with custom modules on my snow leopard box. I recently discovered MAMP and its just easier to work with it than with the personal web server Apple has and via command like utils. I uninstall ports completely but still see 'mysqld' in my Activity Monitor. I would like to uninstall this cleanly. Any tips? Thank you.

  Read the article

• Why does Ubuntu 9.10 hang during boot at "Booting processor 1 APIC 0x1 ip 0x6000"?

  - by BraeburnDev

  I recently installed a new copy of Ubuntu 9.10 (Kernel 2.6.31-14) on to my Hp Pavilion dv6t, so I can setup a Linux development environment. The install went flawlessly and I proceeded with Ubuntu's udate manager's long list of updates (292 in all). I also setup a swap file and activated a Nvidia 185 driver for the Nvidia 260m GPU on the machine. After all this was done I restarted the computer and booted into Ubuntu this time with a newer 2.6.31-19 Kernel which was installed from the update manager. During booth the computer hung at this point: Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013136] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013141] ... version: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013142] ... bit width: 48 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013144] ... generic counters: 4 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013146] ... value mask: 0000ffffffffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013147] ... max period: 000000007fffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013149] ... fixed-purpose counters: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013151] ... counter mask: 000000070000000f Feb 24 14:23:12 braeburn-laptop kernel: [ 0.015539] ACPI: Core revision 20090521 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052264] Setting APIC routing to flat Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052639] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.152580] CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.270845] Booting processor 1 APIC 0x1 ip 0x6000 I can post a full kern.log of this boot process if requested. Hopefully this is enough information to go on. I should add that I'm still new to configuring and running a Linux OS although I know enough basic command line usage to do software development. This is my attempt to become more familiar with Linux and manage my own system. I'd like to get some insight on the nature of this system hang, what the problem is and how to resolve it. At this point I can scrap the install if I broke something, but my intuition says this is an issue with the kernel recognizing the correct hardware configuration for my system, or perhaps this is an issue with the APIC drivers managing Nehalem's new power management capabilities? Thanks for looking at this issue and providing feed back.

  Read the article

• File audit in Linux: how to watch directory tree for deletions?

  - by FractalizeR

  Hello. I have a forum script running on server and somehow small number of attachments begin to get lost. I want to find out what is deleting them and at what time. How can I setup Linux auditd (auditctl) to watch directory tree (attachments are stored inside multi-level directory tree) to watch for file deletions there? May be I should use some other tool for this?

  Read the article

• "tshark: There are no interfaces on which a capture can be done" in Amazon Linux AMI

  - by user1264304

  My goal is to capture packets with tshark in Amazon Linux AMI. While typing tshark in the command line there's an error: "tshark: There are no interfaces on which a capture can be done" How to implement the solution from Wireshark setup Linux for nonroot user $ sudo apt-get install wireshark $ sudo dpkg-reconfigure wireshark-common $ sudo usermod -a -G wireshark $USER $ gnome-session-quit --logout --no-prompt in Amazon Linux AMI (it's not Ubuntu)? Thanks.

  Read the article

• Required software for remote Linux installation

  - by Kartoch

  I'm managing Linux servers for my team. For each new instance, I install the following softwares: etckeeper which keeps tracks of every changes in /etc shorewall to have a simple setup for firewall rsnapshot which keep incremental backup of important directories cron-apt takes charge of update of the system (or, in my case, send me an email to warn me about new updates) But I was wondering if you administrators have any other wonderful tools for daily management. I'm not talking about remote management (like cfengine) but little tools which help to manage a small number of Linux servers.

  Read the article

• What is lighttpd's version of "mod_substitute"?

  - by Dennis

  Recently I read that Apache 2.2 has a new mod to patch outputs on the fly. mod_substitute provides a mechanism to perform both regular expression and fixed string substitutions on response bodies. The feature is useful when I setup testing/development environment. I can replace hostname without touching the content/code. How can I do similar configuration in lighttpd?

  Read the article

• FreeBSD jail with IPFW with loopback - unable to connect loopback interface

  - by khinester

  I am trying to configure a one IP jail with loopback interface, but I am unsure how to configure the IPFW rules to allow traffic to pass between the jail and the network card on the server. I have followed http://blog.burghardt.pl/2009/01/multiple-freebsd-jails-sharing-one-ip-address/ and https://forums.freebsd.org/viewtopic.php?&t=30063 but without success, here is what i have in my ipfw.rules # vim /usr/local/etc/ipfw.rules ext_if="igb0" jail_if="lo666" IP_PUB="192.168.0.2" IP_JAIL_WWW="10.6.6.6" NET_JAIL="10.6.6.0/24" IPF="ipfw -q add" ipfw -q -f flush #loopback $IPF 10 allow all from any to any via lo0 $IPF 20 deny all from any to 127.0.0.0/8 $IPF 30 deny all from 127.0.0.0/8 to any $IPF 40 deny tcp from any to any frag # statefull $IPF 50 check-state $IPF 60 allow tcp from any to any established $IPF 70 allow all from any to any out keep-state $IPF 80 allow icmp from any to any # open port ftp (20,21), ssh (22), mail (25) # ssh (22), , dns (53) etc $IPF 120 allow tcp from any to any 21 out $IPF 130 allow tcp from any to any 22 in $IPF 140 allow tcp from any to any 22 out $IPF 150 allow tcp from any to any 25 in $IPF 160 allow tcp from any to any 25 out $IPF 170 allow udp from any to any 53 in $IPF 175 allow tcp from any to any 53 in $IPF 180 allow udp from any to any 53 out $IPF 185 allow tcp from any to any 53 out # HTTP $IPF 300 skipto 63000 tcp from any to me http,https setup keep-state $IPF 300 skipto 63000 tcp from any to me http,https setup keep-state # deny and log everything $IPF 500 deny log all from any to any # NAT $IPF 63000 divert natd ip from any to any via $jail_if out $IPF 63000 divert natd ip from any to any via $jail_if in but when i create a jail as: # ezjail-admin create -f continental -c zfs node 10.6.6.7 /usr/jails/node/. /usr/jails/node/./etc /usr/jails/node/./etc/resolv.conf /usr/jails/node/./etc/ezjail.flavour.continental /usr/jails/node/./etc/rc.d /usr/jails/node/./etc/rc.conf 4 blocks find: /usr/jails/node/pkg/: No such file or directory Warning: IP 10.6.6.7 not configured on a local interface. Warning: Some services already seem to be listening on all IP, (including 10.6.6.7) This may cause some confusion, here they are: root syslogd 1203 6 udp6 *:514 *:* root syslogd 1203 7 udp4 *:514 *:* i get these warning and then when i go into the jail environment, i am unable to install any ports. any advice much appreciated.

  Read the article

• Is this a HPC or HA mySQL cluster?

  - by Louise Hoffman

  Can someone tell me if this is a High Performance Compute or High Available mySQL cluster? There is a picture of the setup. This is part of the config.ini they talk about [ndbd default] NoOfReplicas=2 # Number of replicas Is it correct understood that NoOfReplicas determines if I have a HPC or a HA cluster?

  Read the article

• httpd 2.4 missing directives

  - by CraigH

  I just setup httpd 2.4 on an Amazone AMI and I noticed in the httpd.conf file there are alot of directives missing compared to a 2.2 conf file. For example: ServerTokens, Timeout, Server Signature, LoadModule are all not present. My question is, if they arent explicitly set in the httpd.conf file are they being set somewhere else? If not, what are their default values and why arent they in the conf file. Should I manually be setting these directives?

  Read the article

• User Account Password forgotten

  - by user3558

  I setup a image box of Vista Business to ghost a couple of weeks ago. I turned it on today and I seem to have forgotten the password. I've tried using OPH-Crack to crack it but with no luck. Does anybody have software that they use to crack user account passwords or know of a work-around for Vista?

  Read the article

< Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >