Search Results

Search found 13180 results on 528 pages for 'non interactive'.

Page 279/528 | < Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >

• LVM mirroring VS RAID1

  - by syrenity

  Hi. Having learned a bit about LVM mirroring, I thought about replacing the current RAID-1 scheme I'm using to gain some flexibility. Problem is that according to what I found on the Internet, LVM is: 1) Slower then RAID-1, at least in reading (as only single volume being used for reading). 2) Non-reliable on power interrupts, and requires disk cache disabling for prevention of data loss. http://www.joshbryan.com/blog/2008/01/02/lvm2-mirrors-vs-md-raid-1/ Also it seems, at least to several setup guides I read (http://www.tcpdump.com/kb/os/linux/lvm-mirroring/intro.html), that one actually requires a 3rd disk for storing the LVM log. This makes the setup completely unusable on 2 disks installations, and lowers the amount of used mirror disks on higher amount of disks. Can anyone comment the above facts, and let me know his experience of using LVM mirroring? Thanks.

  Read the article

• vmware workstation - virtual network adapters missing from ipconfig, still show in networking (XP host)

  - by Adam

  Hi Folks - here's a new one for me, and my first time posting here: I installed VMWare workstation 7.1 on a new PC. VMWare properly installs the virtual network adapters under the Network Connections control panel, however for some reason they do not show up under ipconfig, which is very weird. They also don't appear anywhere in "route print". I don't have network connectivity to the VM. My guesses are perhaps some conflict with Symantec AntiVirus or Symantec Client Firewall. Tried the following things: enabling TCP/IP in the virtual network adapters (they often get installed with it disabled for some reason) Restoring defualts in the VMnetcfg gui tool (this causes an uninstall and reinstall of the virtual network adapters on the host) Re-installing vmware workstation Uninstalling checkpoint secureremote and then reinstalling vmware Just to be clear, this problem is totally on the host. In my searching for stuff about (non-vmware) adapters missing from ipconfig, I see some posts about resetting the TCP/IP stack using netsh. Looking into that next... Thanks!

  Read the article

• Plug and Go NAS Storage

  - by graham.reeds

  My wife and I are separating. One of the things we need to extricate is the media we have accumulated over the years. So I am looking for a NAS solution that is a) relatively low-cost, b) reliable and c) easy for a non-geek to use (I don't want to be tech support). All it needs to do is hold our iTunes library, photos, course work and maybe some movies and TV shows that I currently have. She will be connecting via her Netbook. I have seen this thread but the reviews on Amazon aren't particularly favourable. Due to the need for simplicity, WHS and FreeNAS are none-starters. I need redundancy as if a single drive system was to die then she would lose her course work and photos. Is the ReadyNAS the only real solution out there?

  Read the article

• Choosing a Linux distribution

  - by Luke Puplett

  Dangerous territory with this question so please try to be impartial and instead focus on what to look for when choosing a Linux distribution. I'm completely new to Linux. I thought it'd never happen but I need to have a Linux box to play with and I have a spare fanless Atom PC (32-bit only). I'll be using the machine as a non-commercial hobby server, the trouble is, I don't even know how to compare Linux distributions and why people pick one over another. If anything, I want to have an easy install from USB stick. My question is: what do you look for when choosing a (free?) Linux distribution for a server? If you can, please explain what sorts of things actually differ between one and another without saying which you think is better, just the facts. The way I see it, Linux as a server is just an SSH console and I find it hard to imagine what could be different between one and another.

  Read the article

• A design for watching IPTV anywhere in the house?

  - by Carlos

  I'm currently getting TV and internet via IP to my house. The service comes into an ISP-supplied Router (ST585) which is in turn connected to an IPTV box. I need to replace the router, as it's port forwarding seems to be broken, so I was thinking of getting a box with an IGMP proxy. I once mistakenly got a non-IGMP box, with the result that the internet worked, but the IPTV didn't. The trouble is, I have no idea how to set up the IPTV part of the installation. I do have a copy of the ST585 configuration, but it doesn't look anything like the Cisco stuff that I learned about at CCNA. What are the steps necessary to reproduce the IGMP setup? I was thinking of WireSharking the communications on the network, but I suppose I'd need a hub for that? As a bonus, since the packets are coming in with the TV signal, is it possible to mess with the IGMP setup so I can watch TV anywhere in the house?

  Read the article

• How do I set the umask for files and directories created from the GUI in MacOS X Lion (10.7)?

  - by Avry

  I've set my umask in my .bashrc file to 007. Any files created on the command line after loading my bashrc file respects this setting. I want to be able to set the umask to 007 for any files created using non-command line apps. This document talks about setting the umask via launchd. And it kind of works. If I follow these directions I can change the default permissions on a GUI created file from rw-r--r-- to rw-rw---- but the directories still are not group writeable (i.e. I want them to be rwxrwx--- but they are rwxr-x--- instead) The analog on Linux would be /etc/login.defs as the place to set the umask. What do I change in order for the umask to be set properly (i.e. the way I want it)?

  Read the article

• Is there an equivalent to Windows To Go for personal use?

  - by nhinkle

  Windows To Go is one of the most exciting Windows 8 features to me - the ability to pack up your desktop environment and take it with you anywhere is extremely appealing. Unfortunately, it's only included with Windows 8 Enterprise, which you can't buy for individual use. Is there an equivalent that works for Windows 8 Professional? I would be satisfied by either a third-party program that does the same thing, or some workaround to enable Windows To Go for non-Enterprise versions. I'm aware of various WinPE-based live environments, and that's not what I'm looking for. I want the ability to run a full Windows 8 environment off of a flash drive that I can take anywhere.

  Read the article

• I have a server running Windows 2008 R2 Core and it needs to hosts either SVN or GIT

  - by Jason Adams

  The server allocated for our cross platform projects (both Mac & PC) source repository is running Win2008R2 Core. We're really happy with its stability and we aren't interested in moving over to non-core. We need to get either SVN or GIT installed on the aforementioned box in the shortest amount of steps. We know the advantages/disadvantages of both systems. That being said, we don't care which one we use, we're just are looking for the path of least resistance on setting up a repository on a machine running R2 core.

  Read the article

• A design for watching IPTV anywhere in the house?

  - by Carlos

  I'm currently getting TV and internet via IP to my house. The service comes into an ISP-supplied Router (ST585) which is in turn connected to an IPTV box. I need to replace the router, as it's port forwarding seems to be broken, so I was thinking of getting a box with an IGMP proxy. I once mistakenly got a non-IGMP box, with the result that the internet worked, but the IPTV didn't. The trouble is, I have no idea how to set up the IPTV part of the installation. I do have a copy of the ST585 configuration, but it doesn't look anything like the Cisco stuff that I learned about at CCNA. What are the steps necessary to reproduce the IGMP setup? I was thinking of WireSharking the communications on the network, but I suppose I'd need a hub for that? As a bonus, since the packets are coming in with the TV signal, is it possible to mess with the IGMP setup so I can watch TV anywhere in the house?

  Read the article

• Are there any benefits to using a Distributed vSwitch for iSCSI?

  - by dunxd

  I am designing our vSphere farm - we'll be migrating from ESX 3.5 to 4.1. I plan to set up a new farm using ESXi 4.1, and move the Virtual Machines on the 3.5 farm into it by shutdown, then import. In ESX 3.5 there is no distributed networking, so each host has a vSwitch connected to my SAN NICs, and a port group for the vmkernel. In vSphere (ESXi 4.1) I have the extra option to set up a distributed vSwitch and distributed port groups for vmkernel to access iSCSI storage. Is there any benefit to this, or should I stick to non-distributed networking for iSCSI.

  Read the article

• meta.stackoverflow.com has a problem

  - by asker

  Sorry, this is off topic, but fact evolved that meta.stackoverflow does only allow posting with openid despite stating possibility of post per nick/email. Posted here because underlying prob stemmed from serverfault. So here is a copy: Despite stating that submission via nick/email were possible, required fields are not given. Please fix or state that critique be only issued non anonymously. Tags OpenID Login Get an OpenID Oops! Your question couldn't be submitted because: must include one of these tags -- bug feature-request discussion support users with less than 99 reputation can't create new tags. The tag 'limit' is new. Try using an existing tag instead. name and email, or your OpenID, are missing

  Read the article

• How does a winkydink Teradici offer high res, full FPS, 3D rendering on ESXi 5 VDIs for AutoCAD/SolidWorks/1080p YouTube applications?

  - by BlueToast

  How does such a small Teradici card ![enter image description here][1] offer high resolution, full FPS 3D graphics (1:38) http://www.youtube.com/watch?v=eXA4QMmfY5Y&feature=player_detailpage#t=97s for ESXi 5.0/5.1 VDI environments? We're shooting for an AutoCAD/SolidWorks/YouTube 1080p capable environment. I can't see how such a small and low profile card could possibly have the horsepower to handle such GPU computations for a big environment like that. We're going to have up to 64 VDIs per server, and are a 500-1000 employee count sized company. Someone enlighten me please! Determining which route to go (between RemoteFX and VMware View/PCoIP) and the hardware (NVIDIA 4GB non-Quadro/Tesla GPUs vs Teradici card). Servers have three 4x, three 8x, and one 16x PCI-E lane. Two of the 8x lanes will be occupied by SAS RAID cards.

  Read the article

• Command to see all Windows commands

  - by open_sourse

  When I type help in windows command line, it lists a whole bunch of commands. However I find that there is a whole set of commands that do not appear in this list, for e.g. many networking commands such as ping, tracert, arp, netstat, net etc. I am sure that there is also a whole bunch of non-networking command which is also not listed. So my question is this. Why are these additional commands not shown in help? Is there a subset/group of commands only that help shows? Is there any command/method to list all the commands that can be executed in windows? (I am not talking about additional .exes that get added to path when some new software is installed..)

  Read the article

• What version of Ubuntu to use for Desktop with 8Gb RAM?

  - by Alexander

  This may sound as a stupid question, but I am really interested whether Ubuntu Desktop i386 will be able to use all my available RAM. I want to use the latest, non-LTS version, 10.10. It says on the website that it's (i386) the Recommended version. I also recall that Flash Player had issues with 64 bit Linux. Also, the 64 bit version is listed in the Universal USB Installer as amd64. Does this mean that it's using instruction sets specific to AMD CPUs? (I have an Intel) Will it work fine with Intel? So which one to download and install? What to do to be able to use 8Gb of RAM?

  Read the article

• How to create one additional hidden partition in a USB drive

  - by backslash17

  For security purposes I need to locate a additional hidden partition on USB flash drive. The USB drive contains a security application that will check (in code) if the hidden partition exists. If not I will assume that the application is a non valid copy. Any idea about it? Thanks in advance. EDIT: There is already a programmed secure method to check if the USB drive is correct using the WMI Win32_drive class. The idea is to locate the drive info into the hidden partition and to check if it correct for anti-tampering procedures.

  Read the article

• Default audio device gives an error on WINDOWS 7 (x64) when triing to run VLC from CMD (VideoLAN, VL

  - by Ole Jak

  I use WINDOWS 7 (x64) (Russian) I want to stream life audio from my default audio capture device (microphone) When I set up VLM settings using visual enviroment instruments - VLM settings it all works fine. But when I export created settings/configuration *.vlm file and try to inport it into VLM it gives me nothing I opened that .vlm there is some text... so now I try to run VLC with default settings like this: vlc -i dshow:// --dshow-adev= :sout=#transcode{acodec=mp3,ab=128,channels=2,samplerate=44100}:std{access=http,mux=raw,dst=127.0.0.1:8084} but it dies giving me errors...=( So what shall I do to do live MP3 streaming from my default audio input device using VLC in non UI mode?

  Read the article

• Why some recovery tools are still able to find deleted files after I purge Recycle Bin, defrag the disk and zero-fill free space?

  - by Ivan

  As far as I understand, when I delete (without using Recycle Bin) a file, its record is removed from the file system table of contents (FAT/MFT/etc...) but the values of the disk sectors which were occupied by the file remain intact until these sectors are reused to write something else. When I use some sort of erased files recovery tool, it reads those sectors directly and tries to build up the original file. In this case, what I can't understand is why recovery tools are still able to find deleted files (with reduced chance of rebuilding them though) after I defragment the drive and overwrite all the free space with zeros. Can you explain this? I thought zero-overwritten deleted files can be only found by means of some special forensic lab magnetic scan hardware and those complex wiping algorithms (overwriting free space multiple times with random and non-random patterns) only make sense to prevent such a physical scan to succeed, but practically it seems that plain zero-fill is not enough to wipe all the tracks of deleted files. How can this be?

  Read the article

• What's a good tool for checking from my own machine that my server is up?

  - by chico

  I'm looking for a good tool (web site or not) that I can use to do a simple check whether my web server is accessible from outside LAN (it's serving in a non-standard port). To give some context, I've gone through this problem: can't access my ip from outside. Even the tools I've found are not really working. Currently to fetch the html I serve with the online bash tool I do: curl <my ip>:<my port> \ | sed 's/&/\&amp;/g; s/</\&lt;/g; s/>/\&gt;/g; s/"/\&quot;/g; s/'"'"'/\&#39;/g' I'm looking for a simple tool that can display the html properly, or just show raw text without resorting to sed html escaping and curl.

  Read the article

• Cannot resize an ntfs (Windows Server 2k3r2) boot partition booting from gparted

  - by jshin47

  I am trying to use gparted to make my ntfs system/boot partition larger. I expanded the disk in ESX, providing an extra 60 GB or so of free space. I confirmed that this free space is available in gparted: However, when I try to go to "Move/Resize" the boot partition, there is no unallocated space for me to allocate. It will let me resize the "extended" (non-boot) partition, which makes me think the issue is that the partitions are not contiguous. If it's not obvious, I am no expert in partitioning/storage so any help is appreciated.

  Read the article

• windows printer spool gets stuck with file at 64kb from linux and mac

  - by Juan Diego

  Hi I have two printers one on a file server with windows 2003, and other with windows XP. The thing is that when i try to print from my machine, my file stays in queue for ever, it says 64kb out of whatever the file i send. I have seen similar problems with some machines that run on Mac OS X. The windows machines apparently have no problems printing. They are not connect through active directory, just the network. In the past I have seen people install non microsoft windows Printer server on windows, i dont remember the name of any of the programs. I have being googling a lot and have not found anything to replace the microsoft print spooler service, maybe i am mistaken. Everyday I have to restart the print spooler service i even created a bat file for it. I am out of ideas here.

  Read the article

• How to use psexec without admin privileges on target machine?

  - by HighCommander4

  Is it possible to use psexec to execute a command on a remote machine without having admin privileges on the remote machine? I tried running psexec \\<machine> -u <username> -p <password>, where <username> and <password> are non-admin credentials, but I get an "access denied" error I can remote desktop into the remote machine with the same credentials without any problems. My local machine is running Windows 7 Enterprise 64-bit, and the remote machine is running Windows Server 2008 64-bit. I do have admin privileges on the local machine. EDIT: To all the people who are downvoting this question: I am not trying to circumvent any sort of security measure. I can already run the process on the remote machine by remote desktop-ing into the remote machine and running it. I'm simply looking for a command-line way to do something I can already do through a GUI.

  Read the article

• How to authorize standard users to install drivers on Windows XP

  - by Dr I

  I'm currently looking for a way to autorize my non administrators users to perform an installation of drivers. Here is the speech: All my users are standard users, they got a VirtualBox Hypervisor if they need the administrator rights. But if they put an USB device on the local machine and try to redirect the device to the Virtual Machine, Windows ask for some Administrator rights. I've try to set up those GPO: Allow standard users to install drivers. Install WHQL Drivers: Allow Silently. I don't know how to do this.

  Read the article

• disable browser localization

  - by broiyan

  How do I get the websites that I visit to stop localizing the language probably according to my IP location? This is an website specific issue because, for example economist.com and superuser.com do not do it, but Google Checkout and craigslist.org are doing it. Is there a way to setup Ubuntu and Firefox so that English will always be used for all web pages displayed? Edit: Of course many webpages have a link to an English version, but sometimes they don't. For example I believe such links usually appear on the root resource but sometimes I see non-English languages on child resources where such links do not appear. Example: most Blogger.com blogs appear in English but when I go to the blogger's profile ("view my complete profile"), it appears in another language that matches my geographic location.

  Read the article

• Is HDCP working for ATI/AMD cards on windows 8?

  - by Joel Barsotti

  I have an AMD 6950 and am running windows 8 RTM. I've tried the Catalyst 12.8 drivers and the 12.9 beta drivers. With either drive HDCP seems to be non operational. I've got two dell monitors, one a u2410 and the other a 2408wfp. Both were previously identified as supporting HDCP in windows 7 with the same hardware. I've tested the monitors individual on both DVI and display port, and neither one works. I'm using cyberlinks BD-Advisor to test. My end goal is getting the DirecTv2PC app working again, which is by cyberlink for DirecTV, and requires HDCP. Currently it shuts off when you start playing a recording.

  Read the article

• IIS Hangs on SQL Connections when running ASP.net applications

  - by PaulWaldman

  We have a database server running SQL 2000 and two web servers hosting ASP.net applications. All three servers are running Windows Server 2003 SP2. Our issue is repeatable after about 2 weeks, IIS on one web server is no longer able to establish SQL connections. Static content loads fine. Other non-IIS applications are still able to contact the SQL database server. ODBC functionality also still works. While running SQL profiler a connection is never established from IIS when it is in this state. The only way to fix this situation is to restart the web server. There are no firewalls installed on any machines.

  Read the article

< Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >