Search Results

Search found 177982 results on 7120 pages for 'device not connected'.

Page 28/7120 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• How to detect device type from device connected to router?

  - by molly

  I have a att router and there is an unknown device connected to my network. I can't seem to kick it off because of how att's router settings are created which is kind of dumb. I am able to see its local ip and mac address. I am on a mac with snow leopard. How can I get more information on the device with the information that I have? I want to see what kind of device it is, I have checked all devices that are connected to the router and none seem to match the local ip that is connected. I have WPA encryption setup with a strong password.

  Read the article

• how to detect device type from connected device to router?

  - by molly

  i have a att router and there is an unknown device connected to my network. i cant seem to kick it off because of how att's router settings are created which is kind of dumb. i am able to see its local ip and mac address. i am on a mac with snow leopard. how can i get more information on the device with the information that i have? i want to see what kind of device it is, i have checked all deviced that are connected to the router and non seem to match the local ip that is connected. i have wpa encryption setup with a strong password.

  Read the article

• How Is A SAN Storage Device Managed? [closed]

  - by slickboy

  Apologies if this is a stupid question but my only previous experience with SAN technology is using a SAN virtualisation tool (StarWind iSCSI SAN Free). This tool comes with a management interface that allows for iSCSI targets to be configured on the simulated SAN that can then be accessed. My question is basically: How is physical SAN device managed? Is an operating system required to be installed on the SAN device and then managed via software? Or can it be managed remotely via an application with no OS on the device? Thanks for any help.

  Read the article

• Itty bitty ITTIA DB for Java Embedded Device Development

  - by hinkmond

  Here's a nice 3rd party itty-bitty database, called ITTIA DB, for Java Embedded and Mobile development See: ITTIA DB for Java Embedded Here's a quote: Java applications on mobile devices and other embedded systems can now leverage the robust shared access and data distribution features of ITTIA DB SQL with a new JDBC (Java Database Connectivity) driver released this week. This driver provides significant value for Java developers targeting embedded platforms such as QNX and Linux. Plus, it can exchange data with an Oracle back-end database. That's good if that's what you have on the back-end. Hinkmond

  Read the article

• dell latitude XT touch screen issue

  - by Jake

  yesterday I installed windows 7 ultimate after I had the enterprise version on this machine for a few months. the installation went smoothly and everything worked fine except for the finger detection of the screen(only the pen worked) and the bottom screen buttons for rotating and so. so I started to install all the missing drivers dell recommends for this model on their site, but once I tried to install N-Trig degitizer driver the installation said it was unsuccessful and since then the touch stopped working completely! I tried system restore but it didn't help so I went on and formatted the harddisk completely once again and installed windows but that didn't work either. I tried to install the N-Trig's driver but it was alarting for a fatal error and said that no device was detected. same story with N-Trig rollback. so I checked the device manager and saw an "unknown device" with VID and PID values set as 0000. I figured the N-Trig driver might have messed with the device firmware or something and now it doesnt know it's ID and munufactor... Is there anything that can be done? like forcing the N-Trig driver to install on this device or something? please help!

  Read the article

• Strange behavior of USB HID device

  - by spyder

  I have a device with ARM that work as USB HID. It working well on Windows XP x32 sp 2 and sp 3 (USB 2.0, many PCs), on Windows 7 x32 Ultimate (USB 2.0, Lenovo and HP laptops) but do not work on Windows 7 x64 Home Premium sp1 — plugged and unplugged frequently in USB 2.0 with baloon with "unknown device" in system tray and works not well in USB 3.0 port (MSI all-in-one PC), not all programs can detect it. What can cause this problem? Update. I connected my device via USB hub and everything works fine with it.

  Read the article

• 8 Character Device names

  - by Lee Harrison

  Is there any reason to still use only 8 characters in a device name? My boss still uses this rule for printers, computers, routers, servers... basicly any device connected to our network. This leads to massive confusion among users, especially when it comes to printer. It also leads to confusion from an administration standpoint because every device is named vaguely, and similarly(its only 8 characters!). I understand the history behind this and compatibility with older systems, but none of our legacy systems will ever make use of PS-printers and Wifi networks. Is there any reason to still do this, and what is everyone else doing when it comes to naming network devices at an enterprise level?

  Read the article

• Windows can't communicate with the device or resource (primary DNS server)

  - by David

  I am using Windows 7 Home Premium and am connecting to the Internet through Homeplug. When I connect and enable the LAN the status shows that I'm connected (the IPv4 shows connected), but after like 20 seconds it changes to No Internet connection. Even when it says I'm connected I can't connect to the Internet. My browser (Firefox) shows Server Not Found. When I run the troubleshooter it says "Windows can't communicate with the device or resource (primary DNS server)." What could be the problem, and how do I fix it?

  Read the article

• Unknown device error installing Lexmark printer in Vista

  - by packotjimmy

  I have been using Lexmark X3650 All-In-One on my Windows Vista Desktop PC for a year without problem. Yesterday, I was prompted to plug in the USB from the printer and after that I got errors: "The USB device has malfunctioned." ,"The unknown device has been installed unsuccessfully.". Then, the printer just stoped responding. I have uninstalled the driver from Device Manager and software (using Lexmark's clean utility), rebooted, reinstalled, same thing, tried different ports/cable. Vista displays these two errors stated above immediately upon plug in. Please help me!

  Read the article

• Usb boot device totally unable to be formatted

  - by fuqda

  I'm really upset by now, I've been trying 2hours straight to format a stupid usb drive (I'm new to ubuntu and I dont know if I will last long at this rate) Basically this was the lubuntu boot usb key I tried to remove files with sudo rm I tried to format disk with disk utility I tried to format disk with gparted (with unmounting beforehand) NOTHING WORKS. I cant delete a file. I cant move a file to the usb key. I cant do anything. This is really infuriating.. I dont know what to do ? here are some gparted errors while trying to format to fat32 after unmounting error fsyncing/closing/dev/sdb: input/output error input/output error during write on /dev/sdb when I try to remove by hand, it says "read-only file"

  Read the article

• NAS device for distributed team

  - by user5959

  We are a distributed team spread across 5 locations. We have a shared drive (1 TB data) at our former location that we are currently accessing via Hamachi VPN. Our shared drive is a network folder on a Windows Server located at one of our locations. The current connection speed is terrible. The upload speed at the current location of the shared drive is very slow. We looking for a NAS device that we can host at another location with better upload speed that all of us can access. I am looking for a NAS device that has these features: Minimal Maintenance as we do not have dedicated IT resources Access data on the device from multiple locations. Ability to create network drive (On Windows Computers Map Network Drive) Upload data from random client computers without having to install software. (Right now, we use LogMeIn Rescue's file manager) Ability handle slow or dropped connections when transferring files (Maximum size 1.5 GB)

  Read the article

• No Webcam Device

  - by Aliyah

  deeva@androliyah-A6200:~$ sudo lshw -C video [sudo] password for deeva: *-display description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:e080(size=8) deeva@androliyah-A6200:~$ How do I get my webcam to work?

  Read the article

• Linux (lsusb) not showing String Descriptors of a USB device

  - by tzippy

  I have an embedded device that when plugged to a linux host, shows up with vid and pid that are not in the usb.ids file (proprietary IDs). However I provide String Descriptors that do show up when plugged into a Windows Host. But not on a Linux Host. lsusb -v shows only iManufacturer 3 iProduct 2 iSerial 1 But on the device side, when processing the setup requests, I see that the Strings are actually requested by the Host. By Windows and also the Linux Host. The USB Device Tree Viewwer under Windows shows this output: iManufacturer : 0x01 Language 0x0409 : "My Manufacturer" iProduct : 0x02 Language 0x0409 : "MyProduct" iSerialNumber : 0x03 Language 0x0409 : "My Serial" I feel that lsusb does not show all of the information. Is there a more informative tool?

  Read the article

• How to Monitor a Device with Nagios

  <b>BeginLinux: </b>"The process illustrated here checking a router is the same process you will use to check servers, switchs, printers, etc. It is always going to be a three step process."

  Read the article

• Dear XM Radio: I can't upgrade my device.

  <b>Attaboy:</b> "I was looking forward to doing the update until I visited the link they provided, where I discovered that I would be required to have Windows XP SP2 with Windows Media Player 11 or higher to flash the radio."

  Read the article

• Unable to connect to cable modem when connected to VPN

  - by Spuas

  the scenario is as follows: First I have a cable modem which gives the internet connection. The network is 192.168.0.0/24 and its IP is 192.168.0.1 Second line, I have a router connected to the cable modem. Its "outside" IP is 192.168.0.12. This router creates network 192.168.123.0/24 and its IP there is 192.168.123.254. My computer is wired to the router with IP 192.168.123.126. At this point I am able to access both devices web interfaces by their IPs on a browser (192.168.123.254 for the router and 192.168.0.1 for the cable modem). The problem I have is when I connect to a VPN from the computer. Then I am connected to a second network 10.0.0.0/24 and I get IP 10.0.0.200 (along with 192.168.123.126). I can connect to the router but then I loose connectivity to the cable modem: I cannot acces it through the browser, neither making a ping to it or a tracert. I have tried to add a new route to the windows routes by typing route ADD 192.168.0.1 MASK 255.255.255.0 192.168.123.254 but I cannot access it anyway... Am I missing something on the route adding? Which is the propper way of doing this? Thanks

  Read the article

• Two parts: linux startup script to connect to bluetooth and cron to keep it connected

  - by D.R.

  I have a mini bluetooth keyboard and a Raspberry Pi running a Debian-based distro. I know the MAC address of the keyboard but for this question, let's just use AA:BB:CC:DD:EE:FF. Right now I have to have a wired keyboard connected as well as my bluetooth dongle for the mini-keyboard and on the wired keyboard, I have to run the following when the device boots up: sudo hidd --connect AA:BB:CC:DD:EE:FF If the device goes idle for too long, then the bluetooth disconnects and I have to pull out my wired keyboard and retype that same command. What I'm looking for it a way to have that command run at startup and a way to sense if it gets disconnected so that it will auto reconnect. The annoying thing is that they keyboard has to be in pairing mode (even though it has already been paired) when I run that command, otherwise it tells me the host is down. So perhaps the script needs to prevent it from disconnecting due to inactivity, otherwise I'll have to put it back in pairing mode to reconnect. So to recap: - A script to connect at startup (I can make sure to put the keyboard into pairing mode before turning it on) - A script to prevent it from disconnecting (maybe some sort of signal to send to it every 60 seconds or something?) Any help with this is greatly appreciated! StackOverflow is always the best place to find answers to weird questions! I've been searching long and hard for an answer, but finally had to resort to coming here! Thanks!

  Read the article

• Using public interfaces on a server connected through a GRE tunnel

  - by Evan

  I'm pretty new to networking so please forgive any terminology mistakes. I have 2 servers connected with a GRE tunnel. Server1 (10.0.0.1) ---- Server2 (10.0.0.2) I want to be able to bind to the public IPs on Server2 using Server1. To do this, I setup virtual interfaces with Server2's public IPs on Server1 and then used routing rules on Server1 to route the packets through the GRE tunnel. On Server1: ip rule add from [Server2's first public IP] table gre ip rule add from [Server2's second public IP] table gre ip route add default via 10.0.0.2 dev gre1 table gre This works great and I can see the packets arriving via GRE on Server2. I can see the packet exiting the tunnel on Server2's gre1 device as shown: From Server1: ping -I [Server2's public ip] google.com tcpdump from Server2's GRE tunnel device: 12:07:17.029160 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) [Server2's public ip] > 74.125.225.38: ICMP echo request, id 6378, seq 50, length 64 This is exactly the packet I want. However, I'm not seeing it go out at all on eth0:0 (where Server2's public IP is bound to). I've tried to use routing rules to get packets coming from Server2's public IP (which would be coming out of dev gre1) to go through dev eth0 on the public default gateway and that doesn't work either. I'm at a loss, thank you to anyone who can help.

  Read the article

• External SATA drive does not work without the optional USB cable *also* connected

  - by Software Monkey

  I have Vantec NST-260SU external eSATA/USB drive enclosure (which came with an optional separate power supply) connected to a relatively new Windows 7 computer. The drive should work as a SATA drive with either the separate power supply or using a USB cable solely for power. I would prefer to use the external power supply because I have used all my rear USB ports. Now, if I connect both the eSATA and USB cable, then: The drive shows in the BIOS list of AHCI drives (and not in the list of attached USB devices). Everything I can see about it in Computer Management seems to show it as a SATA driver (for example, it shows as "Location 0 (Channel 5, Target 0, Lun 0)" like my other SATA drives (and not "on USB Mass Storage Device" like my USB flash-drives). It seems very fast, very much faster than my USB flash drives. However, if I disconnect the USB cable and attach the power adapter instead, the drive does not show in the BIOS list and cannot be seen by Windows. The power LED on the enclosure is lit, and the drive enclosure becomes warm after running for a bit, so I am sure it is receiving power. Does anyone know if this device requires both the USB and eSATA cable, and if so, why? Or is there possibly something I need to do to reset the enclosure to not need the USB - the install instructions are pretty clear that you must connect the SATA cable before connecting the USB cable in order for the drive to function as SATA, which I am sure I did. PS: I have reviewed the small manual which came with it, which has not been of help.

  Read the article

• Windows Server Connected to Domain Without Being Domain Controller

  - by saluce

  Can a Windows Server be connected to an Active Directory domain without being a domain controller? Here's the scenario: I want to use Windows Server 2012 to run several virtual machines for testing our web application in a variety of environments. We have a corporate domain, and I'd like to use the corporate login (or at least a common login) on each of the virtual machines without necessarily having to get IT to set up each virtual machine on the corporate domain. Also, I need the server itself to be able to authenticate domain logins (the app uses domain login information for users to login). However, I absolutely do NOT want it to be a DC on the corporate network. Thus, my questions: Can a Windows Server be connected to an Active Directory domain without being a DC? Can a Windows Server authenticate users on another domain without being a part of that domain? Can a Windows Server be a domain controller in a small network (comprised of just the server and itself) and use the corporate domain's Active Directory for authenticating user logins to the server, the web app, and the virtual machines?

  Read the article

• Discover the public ip of a network without being connected

  - by Martin Trigaux

  Let say, I'm next to a network and can see the traffic (with airodump or similar tool) but can not decipher it (because I am not connected on the network). Is it possible to discover the public ip address of the network ? I know the MAC address of the users connected on the network but do I know the one of the router ? If yes, maybe there is a way to do the matching. I know IP addresses are not forever but some addresses are static and never change. Maybe there is a database of MAC address having recorded that. Google has a database that match MAC address and geographical coordinates so why not with IP addresses ? Other idea, if I know where am I, I can maybe guess the IP range used in the city by the ISP (is it findable ?) and then try to "ping" each IP on the range (if it is a /24, it's possible, even /16 maybe). Will I get some information like the MAC of the box or see some traffic on the network ? These are two ideas I had. I don't know if they are doable, certainly not perfect. Do you think of some others ? By trying several methods, maybe I can get a guess with a bit of luck. Thank you

  Read the article

• How to connect via SSH to a linux mint system that is connected via OpenVPN

  - by Hilyin

  Is there a way to make SSH port not get sent through VPN so when my computer is connected to a VPN, it can still be remoted in via SSH from its non-VPN IP? I am using Mint Linux 13. Thank you for your help! This is the instructions I followed to setup the VPN: Open Terminal Type: sudo apt-get install network-manager-openvpn Press Y to continue. Type: sudo restart network-manager Download BTGuard certificate (CA) by typing: sudo wget -O /etc/openvpn/btguard.ca.crt http://btguard.com/btguard.ca.crt Click on the Network Manager icon, expand VPN Connections, and choose Configure VPN A Network Connections window will appear with the VPN tab open. Click Add. 8. A Choose A VPN Connection Type window will open. Select OpenVPN in the drop-down menu and click Create.. . In the Editing VPN connection window, enter the following: Connection name: BTGuard VPN Gateway: vpn.btguard.com Optional: Manually select your server location by using ca.vpn.btguard.com for Canada or eu.vpn.btguard.com for Germany. Type: select Password User name: username Password: password CA Certificate: browse and select this file: /etc/openvpn/btguard.ca.crt Click Advanced... near the bottom of the window. Under the General tab, check the box next to Use a TCP connection Click OK, then click Apply. Setup complete! How To Connect Click on the Network Manager icon in the panel bar. Click on VPN Connections Select BTGuard VPN The Network Manager icon will begin spinning. You may be prompted to enter a password. If so, this is your system account keychain password, NOT your BTGuard password. Once connected, the Network Manager icon will have a lock next to it indicating you are browsing securely with BTGuard.

  Read the article

• Strange WiFi problem - network is "not connected" but works

  - by GalacticCowboy

  Background I'm using a Windows XP tablet PC connected to my home network. I do broadcast the SSID, but otherwise the wireless network is locked down as tight as I can make it - WPA2 with a strong key, MAC filtering, etc. I've had this computer for about 4 years and the router for about 6 months. Before that, the previous router was set up in the same way, and I've never had any particular problems. Problem This morning - as I type this, as a matter of fact - Windows is reporting that none of my network connections are connected. Yet somehow my Internet connectivity still works! ipconfig reports a valid IP address, domain, etc., even though Windows apparently doesn't know about it. I tried repairing the connection and it had no effect - the repair eventually timed out. I'm pretty sure that I could reboot the computer and/or the router, etc. and it would fix the problem. However, I'm more interested in knowing if any of you have ever seen anything like this, and what might have caused it? Since it works I'm not inclined to mess with it too much. My concern is that it's a precursor to bigger problems.

  Read the article

• Writing Device Drivers for Microcontrollers, where to define IO Port pins?

  - by volting

  I always seem to encounter this dilemma when writing low level code for MCU's. I never know where to declare pin definitions so as to make the code as reusable as possible. In this case Im writing a driver to interface an 8051 to a MCP4922 12bit serial DAC. Im unsure how/where I should declare the pin definitions for The CS(chip select) and LDAC(data latch) for the DAC. At the moment there declared in the header file for the driver. Iv done a lot of research trying to figure out the best approach but havent really found anything. Im basically want to know what the best practices... if there are some books worth reading or online information, examples etc, any recommendations would be welcome. Just a snippet of the driver so you get the idea /** @brief This function is used to write a 16bit data word to DAC B -12 data bit plus 4 configuration bits @param dac_data A 12bit word @param ip_buf_unbuf_select Input Buffered/unbuffered select bit. Buffered = 1; Unbuffered = 0 @param gain_select Output Gain Selection bit. 1 = 1x (VOUT = VREF * D/4096). 0 =2x (VOUT = 2 * VREF * D/4096) */ void MCP4922_DAC_B_TX_word(unsigned short int dac_data, bit ip_buf_unbuf_select, bit gain_select) { unsigned char low_byte=0, high_byte=0; CS = 0; /**Select the chip*/ high_byte |= ((0x01 << 7) | (0x01 << 4)); /**Set bit to select DAC A and Set SHDN bit high for DAC A active operation*/ if(ip_buf_unbuf_select) high_byte |= (0x01 << 6); if(gain_select) high_byte |= (0x01 << 5); high_byte |= ((dac_data >> 8) & 0x0F); low_byte |= dac_data; SPI_master_byte(high_byte); SPI_master_byte(low_byte); CS = 1; LDAC = 0; /**Latch the Data*/ LDAC = 1; }

  Read the article

• Android, how to detect if somebody has touched\moved the device.

  - by systempuntoout

  Is it possible to know if someone has touched the phone (lifting or moving it for example), using some Events? How would you code it?

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >