Search Results

Search found 725 results on 29 pages for 'rdp'.

Page 28/29 | < Previous Page | 24 25 26 27 28 29  | Next Page >

  • L2TP iptables port forward

    - by The_cobra666
    Hi all, I'm setting up port forwarding for an L2TP VPN connection to the local Windows 2003 VPN server. The router is a simpel Debian machine with iptables. The VPN server works perfect. But I cannot log in from the WAN. I'm missing something. The VPN server is using a pre-shared key (L2TP) and give's out an IP in the range: 192.168.3.0. Local network range is 192.168.2.0/24 I added the route: with route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13 (the vpn server) iptables -t nat -A PREROUTING -p udp --dport 1701 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 1701 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 500 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 4500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 4500 -j ACCEPT iptables -t nat -A PREROUTING -p 50 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 50 -j ACCEPT iptables -t nat -A PREROUTING -p 51 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 51 -j ACCEPT The whole iptables script is (without the line's from above): echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/ipv4/tcp_syncookies #Flush table's iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -t nat -F #Drop traffic iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT #verkeer naar buiten toe laten en nat aanzetten iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE #RDP forward voor windows servers iptables -t nat -A PREROUTING -p tcp --dport 3389 -i eth0 -j DNAT --to 192.168.2.10:3389 iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 3340 -i eth0 -j DNAT --to 192.168.2.12:3340 iptables -A FORWARD -p tcp --dport 3340 -j ACCEPT #toestaan SSH verkeer iptables -t nat -A PREROUTING -p tcp --dport 22 -i eth0 -j DNAT --to-destination 192.168.2.1 iptables -A INPUT -p tcp --dport 22 -j ACCEPT #toestaan verkeer loopback iptables -A INPUT -i lo -j ACCEPT #toestaan lokaal netwerk iptables -A INPUT -i eth1 -j ACCEPT #accepteren established traffic iptables -A INPUT -i eth0 --match state --state RELATED,ESTABLISHED -j ACCEPT #droppen ICMP boodschappen iptables -A INPUT -p icmp -i eth0 -m limit --limit 10/minute -j ACCEPT iptables -A INPUT -p icmp -i eth0 -j REJECT ifconfig eth1 192.168.2.1/24 ifconfig eth0 XXXXXXXXXXXXX/30 ifconfig eth0 up ifconfig eth1 up route add default gw XXXXXXXXXXXXXXXXXXX route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13

    Read the article

  • Using WSUS Admin Console from outside domain

    - by Nick
    Environment: I have a workstation on our primary domain. We have a primary WSUS Server that is the upstream server of 8 different testing domains. The Primary WSUS server is not part of any domain. Routing is configured between my workstation and the Primary WSUS server. I can RDP to the Primary WSUS sever without any problem. The router is configured to forward any any between my workstation and the Primary WSUS server. This WSUS server cannot be part of a domain due to external requirements (I can't change them) on the lab I work in. The version of WSUS is WSUS 3.0 SP 2 What I want to do: I need to connect to the WSUS server with the WSUS Admin console from my local workstation. The end goal is to connect via Powershell and manage with that. I also need to take what I do here and port it to the 8 test domains so I can manage those WSUS servers. The routing is all in place so I can talk to the servers, it's just connecting to the WSUS console that is causing problems. The problem: I cannot get my workstation to connect to the WSUS Console. I get one of the following errors depending on the setup. 1st error: Cannot connect to 'WSUS'. You do not have the permissions required to access this WSUS server. To connect to the server you must be a member of the WSUS Administrators or WSUS Reporters security groups I also get the warning 7012 from the event log that says the same thing. 2nd error: Cannot connect to 'WSUS'. The server may be using another port or different Secure Sockets Layer setting. What I have tried: So far I have configured IIS for Anonymous Authentication on both the WSUS Administration and ApiRemoting30 using an account will call WSUS_User. With this in place, I get the 1st error. When I do this though, the local WSUS Console cannot be used either. Reverting back to only Windows Authentication allows the local console to work, but the remote console now give the 2nd error. I have confirmed the port, and that there is no SSL in use (which is a policy that is pushed from above, that I cannot effect). I have placed WSUS_User in the groups mentioned above, but it still does not connect. I made sure WSUS_User has full access on C:\Program Files\Update Services and C:\Program Files\Update Services\WebServices I am not very familiar with the workings of WSUS or IIS, and have gone as far as I can figure out on my own. Googling these errors all take me to the same steps about Anonymous Authentication and configuring permissions on folders. Note: I have cross-posted this to StackOverflow as well.

    Read the article

  • Forms authentication failed between web server and sql server

    - by Matt Bear
    I've actually found the solution, but I'm trying to understand why it failed, and why my solution fixed the problem. We have an application that uses forms authentication between a web server and sql server, web server runs server 2008, sql server runs 2008 r2, and sql server 2008. In august the sql server was patched with .net 3.5.1, the web server was untouched, and the forms authentication continued to work. 1 week ago we virtualized the web server onto our vSphere server because of failing hardware. Afterwards the form authentication failed with event code 4005, detail code 50201, The ticket supplied was invalid (on the sql server). In fact the sql server started generating Schannel errors and began blue screening 3-4 times a day. At this point I touched the sql server for the first time(ever), the errors were non specific, any reference to them I could find had to do with either zone alarm(which we don't run), or memory errors. So I applied service pack 1, which stopped the blue screening, but did not fix the forms authentication. At this point we had a work around, so we put it on the back burner while we completed another project, and I was able to get back on it last night. First thing was to adjust some code in the webconfig file on the sql server, nothing, next was regenerate and change out the machine key, still no change. Update the DNS servers, no change. Finally I went through and installed all windows updates, two reboots, (over RDP installed a network card driver which failed, and did not have my server room key, that was fun). After that, forms authentication was working again. And the sql server stopped generating as many errors, I've gotten two schannel errors since then. In short, forms authentication began failing when the web server was cloned onto a virtual machine, which caused the sql server to blue sceen? and forms authentication to fail. And could only be fixed by applying patches to the sql server?(I'm wishing I had patched the servers one at a time so I could know for sure which patch on which server fixed it). My question is why did it fail, and why did patching fix it? I hate fixing something without fully understanding the why and how.

    Read the article

  • Remote installing an msi on citrix servers using WMI

    - by capn
    OK, I'm a C# programmer that is trying to streamline the deployment of a custom windows form app I inherited and built an installer for with WiX (this app will need to be reinstalled regularly as I'm making changes to it). I'm not really used to admin type things (or vbs, or WMI, or terminal servers, or Citrix, and even WiX and MSI are not things I usually deal with) but so far I put together some vbs and have an end goal in mind. The msi does work, and I've installed it from the mapped O: drive on my dev machine and while RDP'd to a citrix machine. End Goal: Deploy code written on my dev machine and compiled into an MSI (that I can improve upon within the confines of WiX and whatever the Windows Installer Engine allows) to the cluster of Citrix machines my users have access to. What am I missing in my script to get the MSI to execute on the remote machines? Layout: Machine A is my dev machine, and has the vbs script and the msi file (XP SP3) Machines C1 - C6 are the Citrix Servers that need the application installed them via the msi (Server 2003 R2 SP2) There is also optionally a shared network resource that all the machines can access. Script: 'Set WMI Constants Const wbemImpersonationLevelImpersonate = 3 Const wbemAuthenticationLevelPktPrivacy = 6 'Set whether this is installing to the debug Citrix Servers Const isDebug = true 'Set MSI location 'Network location yields error 1619 (This installation package could not be opened.) msiLocation = "\\255.255.255.255\odrive\Citrix Deployment\Setup.msi" 'Directory on machine A yields error 3 (file not found) 'msiLocation = "C:\Temp\Deploy\Setup.msi" 'Mapped network drive (on both machines) yield error 3 (file not found) 'msiLocation = "O:\Citrix Deployment\Setup.msi" 'Set login information strDomain = "MyDomain" Wscript.StdOut.Write "user name:" strUser = Wscript.StdIn.ReadLine Set objPassword = CreateObject("ScriptPW.Password") Wscript.StdOut.Write "password:" strPassword = objPassword.GetPassword() 'Names of Citrix Servers Dim citrixServerArray If isDebug Then citrixServerArray = array("C4") Else 'citrixServerArray = array("C1","C2","C3","C5","C6") End If 'Loop through each Citrix Server For Each citrixServer in citrixServerArray 'Login to remote computer Set objLocator = CreateObject("WbemScripting.SWbemLocator") Set objWMIService = objLocator.ConnectServer(citrixServer, _ "root\cimv2", _ strUser, _ strPassword, _ "MS_409", _ "ntlmdomain:" + strDomain) 'Set Remote Impersonation level objWMIService.Security_.ImpersonationLevel = wbemImpersonationLevelImpersonate objWMIService.Security_.AuthenticationLevel = wbemAuthenticationLevelPktPrivacy 'Reference to a process on the machine Dim objProcess : Set objProcess = objWMIService.Get("Win32_Process") 'Change user to install for terminal services errReturn = objProcess.Create _ ("cmd.exe /c change user /install", Null, Null, intProcessID) WScript.Echo errReturn 'Install MSI here 'Reference to a product on the machine Set objSoftware = objWMIService.Get("Win32_Product") 'All users set in option parameter, I'm led to believe that the third parameter is actually ignored 'http://www.webmasterkb.com/Uwe/Forum.aspx/vbscript/2433/Installing-programs-with-VbScript errReturn = objSoftware.Install(msiLocation,"ALLUSERS=2 REBOOT=ReallySuppress",True) Wscript.Echo errReturn 'Change user back to execute errReturn = objProcess.Create _ ("cmd.exe /c change user /execute", Null, Null, intProcessID) WScript.Echo errReturn Next I also tried using this to install, it doesn't return an error code, but doesn't install the msi either, and it makes me wonder if the change user /install command is even really working. errReturn = objProcess.Create _ ("cmd.exe /c msiexec /i ""O:\Citrix Deployment\Setup.msi"" /quiet") Wscript.Echo errReturn

    Read the article

  • Windows Server 2003 W3SVC Failing, Brute Force attack possibly the cause

    - by Roaders
    This week my website has disappeared twice for no apparent reason. I logged onto my server (Windows Server 2003 Service Pack 2) and restarted the World Web Publishing service, website still down. I tried restarting a few other services like DNS and Cold Fusion and the website was still down. In the end I restarted the server and the website reappeared. Last night the website went down again. This time I logged on and looked at the event log. SCARY STUFF! There were hundreds of these: Event Type: Information Event Source: TermService Event Category: None Event ID: 1012 Date: 30/01/2012 Time: 15:25:12 User: N/A Computer: SERVER51338 Description: Remote session from client name a exceeded the maximum allowed failed logon attempts. The session was forcibly terminated. At a frequency of around 3 -5 a minute. At about the time my website died there was one of these: Event Type: Information Event Source: W3SVC Event Category: None Event ID: 1074 Date: 30/01/2012 Time: 19:36:14 User: N/A Computer: SERVER51338 Description: A worker process with process id of '6308' serving application pool 'DefaultAppPool' has requested a recycle because the worker process reached its allowed processing time limit. Which is obviously what killed the web service. There were then a few of these: Event Type: Error Event Source: TermDD Event Category: None Event ID: 50 Date: 30/01/2012 Time: 20:32:51 User: N/A Computer: SERVER51338 Description: The RDP protocol component "DATA ENCRYPTION" detected an error in the protocol stream and has disconnected the client. Data: 0000: 00 00 04 00 02 00 52 00 ......R. 0008: 00 00 00 00 32 00 0a c0 ....2..À 0010: 00 00 00 00 32 00 0a c0 ....2..À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ 0028: 92 01 00 00 ... With no more of the first error type. I am concerned that someone is trying to brute force their way into my server. I have disabled all the accounts apart from the IIS ones and Administrator (which I have renamed). I have also changed the password to an even more secure one. I don't know why this brute force attack caused the webservice to stop and I don't know why restarting the service didn't fix the problem. What should I do to make sure my server is secure and what should I do to make sure the webserver doesn't go down any more? Thanks.

    Read the article

  • Why can't I connect to remote Microsoft SQL Server through SSH tunnel?

    - by Alexander
    I have at home a D-Link DIR-615 C1 router with DD-WRT. I set up the SSH server on the router, and log on through an SSH2-RSA passphrase-protected key. That router is the gateway between the local network and the internet. One of the computers on that network has Microsoft SQL Server 2008 installed, with TCP/IP protocol enabled through port 1433. I've set up port forwarding on the router, so that remote connections are possible and are, in fact, working (some developers log on remotely without problems). I am part of another network, that has internet access through a proxy server, which only has ports 80 and 443 opened. I can't connect to that MSSQL server on that remote server because 1433 port is closed on this network. I connected (using Putty) through 443 port to my router's SSH server, and set up 2 tunnels. One is for RDP (3389), and it's working. The other is for 1433 port, to connect to the server. I can't connect through the SSH tunnel to the MS SQL Server, neither through telnet, or through GUI clients. Am I missing something? Additional details: on connect, I get this error from SQL Server Management Studio: TITLE: Connect to Server Cannot connect to localhost:14330. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 3) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=3&LinkId=20476 BUTTONS: OK The tunnel is configured like this: L14330 192.168.0.103:1433 192.168.0.103 is the permanent address of the SQL Server on the LAN. I also successfully forwarded TCP traffic of 3389 port to that IP, so tunneling is working to that IP address. When connecting without tunnel, through Microsoft SQL Server Management Studio, using the same method the connection establishes. Too bad my proxy doesn't allow 1433 port traffic, I wouldn't have this headache.

    Read the article

  • Cannot Send Item error in Outlook - permissions to registry?

    - by Tim Alexander
    The issue I am trying to solve is to do with users getting a Cannot Send Item error in Outlook 2007 connecting to Exchange 2007. Basically if there is an image in the email (either one they have pasted in or one from another email in the chain) they get a "Cannot Send Item" error. Initially thought it was a citrix issue but users get it when they RDP to a server as well. Changing the message to Rich Text works 80% of the time but I do not think this is a solution but more of a temporary workaround. After some troubleshooting we found that the error can be fixed by adding the user as a member of the local power users group. of course this is not really a fix. My thoughts were that the ability of a power user to add/remove software may give them more access to the registry which might allow them to get round a restriction that is in place for a normal user. I have tried going through a procmon but the wealth of information is confusing. It initially looked like it may be an Outlook 2007 email security setting but this does not change between power user and normal user (set to 1 in the registry, "Use the security setting from Outlook Security Settings Public Folders"). I am struggling to fine tune my troubleshooting to work out exactly what is blocking it. Has anyone had an experience with an error similar to this? Or are there any tips for trying to track down issues via procmon as I must admit my approach seems somewhat lacking :) EDIT: So I have trawled through the two logs we have from process monitor (one as a power user and one a normal user). annoyingly I can find no obvious difference where something is denied access. There are more access denied events in the normal user log but these are quickly followed by sucessful entries to the same path fractions of a second later. The only thing that does stand out is an access denied to HKCR.html. This does not even appear in the power user version of the log. From what I understand this helps determine the default browser which ties in nicely with the fact that 9 out of 10 times you can send the message as Rich Text. EDIT: Looks like KB2509470 was causing the issue. Not really sure why but when I can work out what it does and why it causes the problem will post here unless anyone beats me to it!

    Read the article

  • How do I (robustly) remotely execute tasks on Windows workstations in a domain?

    - by Zac B
    I'm not even sure if "robustly" is a word. Anyway. Context: We have a few hundred Windows 7 workstations on a LAN. We use AD/GPO management pretty heavily, but there are a lot of periodic and/or manual maintenance tasks we need to do that can't be done via GPO/scheduled task. For example, say I want to execute program X (which runs silently, in the background, and doesn't bother the user) on workstation Y, or say I want to execute task A on a workstation group B either on a schedule or on demand. Kicking the users off of their computers to do this (i.e. using RDP) is a no-no, and doesn't work on groups anyway. Question: What's the best way to do this that is robust enough that, after setup, I could give it to beginner support people (read: people who are phobic of the command line, and get confused with GUI interfaces more complicated than Firefox)? I'm a competent programmer, and, if there is a robust set of tools or framework out there for this type of task, I'd consider hacking something together myself if it didn't take too long. If there's some combination of tools or techniques that others use to make remote-workstation-administration doable by beginners, I have yet to find it. For those who care about the "why": I'm midlevel IT, and was told to implement a remote management solution that allows arbitrary/scheduled remote execution, with confirmation that programs actually ran remotely, and the ability to view what they returned. "Why?" I asked, "Can't I just use PsExec and the task scheduler on a dispatcher machine?" "No," I was told, "'Joe' the second-week tech is going to be in charge of this one, and he needs something simple with a GUI." What I've tried: I've played with making a bunch of one-clickable "transfer files to remote computer and run them with PsExec" batch/VB scrips, but those tend to break down and don't easily support running on customizable groups. I've played a little bit with the Windows version of Puppet, but it doesn't support arbitrary-time remote execution (it's ability to group computers into a tree/node structure is really nice though). I've used an older version of Altiris, and, while it does a lot of what I want, it's interface is awful, it's slow, crashes a lot, and is probably too expensive for management. SwiftWater's DMS solution does some of what I want, but it's very underdeveloped, closed-source (not a deal breaker but not ideal), and I get the impression that support and reliability are lacking.

    Read the article

  • Why can't I connect to remote Microsoft SQL Server through SSH tunnel?

    - by Alexander
    I have at home a D-Link DIR-615 C1 router with DD-WRT. I set up the SSH server on the router, and log on through an SSH2-RSA passphrase-protected key. That router is the gateway between the local network and the internet. One of the computers on that network has Microsoft SQL Server 2008 installed, with TCP/IP protocol enabled through port 1433. I've set up port forwarding on the router, so that remote connections are possible and are, in fact, working (some developers log on remotely without problems). I am part of another network, that has internet access through a proxy server, which only has ports 80 and 443 opened. I can't connect to that MSSQL server on that remote server because 1433 port is closed on this network. I connected (using Putty) through 443 port to my router's SSH server, and set up 2 tunnels. One is for RDP (3389), and it's working. The other is for 1433 port, to connect to the server. I can't connect through the SSH tunnel to the MS SQL Server, neither through telnet, or through GUI clients. Am I missing something? Additional details: on connect, I get this error from SQL Server Management Studio: TITLE: Connect to Server Cannot connect to localhost:14330. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 3) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=3&LinkId=20476 BUTTONS: OK The tunnel is configured like this: L14330 192.168.0.103:1433 192.168.0.103 is the permanent address of the SQL Server on the LAN. I also successfully forwarded TCP traffic of 3389 port to that IP, so tunneling is working to that IP address. When connecting without tunnel, through Microsoft SQL Server Management Studio, using the same method the connection establishes. Too bad my proxy doesn't allow 1433 port traffic, I wouldn't have this headache.

    Read the article

  • routing through multiple subinterfaces in debian

    - by Kstro21
    my question is as simple as the title, i have a debian 6 , 2 NICs, 3 different subnets in a single interface, just like this: auto eth0 iface eth0 inet static address 192.168.106.254 netmask 255.255.255.0 auto eth0:0 iface eth0:0 inet static address 172.19.221.81 netmask 255.255.255.248 auto eth0:1 iface eth0:1 inet static address 192.168.254.1 netmask 255.255.255.248 auto eth1 iface eth1 inet static address 172.19.216.3 netmask 255.255.255.0 gateway 172.19.216.13 eth0 is conected to a swith with 3 differents vlans, eth1 is conected to a router. No iptables DROP, so, all traffic is allowed. Now, passing the traffic through eth0 is OK, passing the traffic through eth0:0 is OK, but, passing the traffic through eth0:1 is not working, i can ping the ip address of that sub interface from a pc where this ip is the default gateway, but can't get to servers in the subnet of the eth1 interface, the traffic is not passing, even when i set the iptables to log all the traffic in the FORWARD chain and i can see the traffic there, but, the traffic is not really passing. And the funny is i can do any the other way around, i mean, passing from eth1 to eth0:1, RDP, telnet, ping, etc, doing some work with the iptable, i manage to pass some traffic from eth0:1 to eth1, the iptables look like this: iptables -t nat PREROUTING -d 192.168.254.1/32 -p tcp -m multiport --dports 25,110,5269 -j DNAT --to-destination 172.19.216.1 iptables -t nat PREROUTING -d 192.168.254.1/32 -p udp -m udp --dport 53 -j DNAT --to-destination 172.19.216.9 iptables -t nat PREROUTING -d 192.168.254.1/32 -p tcp -m tcp --dport 21 -j DNAT --to-destination 172.19.216.11 iptables -t nat POSTROUTING -s 172.19.216.0/24 -d 172.19.221.80/29 -j SNAT --to-source 172.19.221.81 iptables -t nat POSTROUTING -s 172.19.216.0/24 -d 192.168.254.0/29 -j SNAT --to-source 192.168.254.1 iptables -t nat POSTROUTING -s 172.19.216.0/24 -o eth0 -j SNAT --to-source 192.168.106.254 dong this is working, but,it is really a headache have to map each port with the server, imagine if i move the service from server, so, now i have doubts: can debian route through multiple subinterfaces?? exist a limit for this?? if not, what i'm doing wrong when i have the same setup with other subnets and it is working ok?? without the iptables rules in the nat, it doesn't work thanks and i hope good comments/answers

    Read the article

  • Can't find windows 2000 domain after PDC Change

    - by Mark A Kruger
    This is a windows 2000 domain issue. I had an old win2000 PDC that was beginning to fail. So, trying to be pre-emptive, I installed a new BDC, then "demoted" the old PDC and took it off the network. Now it appears that no member server can "find" the domain anymore. No logins work (for services or a RDP or anything). What I've tried (based on googling): Verified sysvol is shared on all servers. Used nslookup to verify that DC's are being found. netdiag /fix meta data cleanup routines. verified no firewall issues (port 389 etc) seizing all roles to new PDC (I did that as part of the original promotion). LMHOST file and Netbios settings. At the moment it seems like I can get the DC's returned but cannot contact them. I'm at a loss. My latest attempt was to remove a member server from the domain and try to "re-add" it. When I do that I get this message: The query was for the SRV record for _ldap._tcp.dc._msdcs.cfwebtools.com The following domain controllers were identified by the query: db-dev1.cfwebtools.com file-prod1.cfwebtools.com cfwt-pdc2.cfwebtools.com However no domain controllers could be contacted. It then goes on to ask if I've checked my A record and made sure they are running. Is there a way to force this domain to be seen? I also shared sysvol (or double checked it) and restarted the dfsr service. More information. I got looking at sysvol and found it was not shared on 2 of these servers. Only one of them (db-dev1) has a "good" or at least "populated" sys vol store. So I tried doing a "d2" recovery of my PDC against that good sysvol. But it never synchs - or at least it does not seem to synch. I'm guessing if I could get sysvol and netlogin to kick in and replicate that would fix my issue. I think these DC's aren't responding because they are waiting for replication which is broken somehow. Would taking down all the DC's except for db-dev1 fix the issue - at least temporarily? I know I can't just copy the sysvol stuff over to the other 2 can I?

    Read the article

  • A Rose by Any Other Name..

    - by Geoff N. Hiten
    It is always a good start when you can steal a title line from one of the best writers in the English language.  Let’s hope I can make the rest of this post live up to the opening.  One recurring problem with SQL server is moving databases to new servers.  Client applications use a variety of ways to resolve SQL Server names, some of which are not changed easily <cough SharePoint /cough>.  If you happen to be using default instances on both the source and target SQL Server, then the solution is pretty simple.  You create (or bug the network admin until she creates) two DNS “A” records. One points the old name to the new IP address.  The other creates a new alias for the old server, since the original system name is now redirected.  Note this will redirect ALL traffic from the old server to the new server, including RDP and file share connection attempts.    Figure 1 – Microsoft DNS MMC Snap-In   Figure 2 – DNS New Host Dialog Box Both records are necessary so you can still access the old server via an alternate name. Server Role IP Address Name Alias Source 10.97.230.60 SQL01 SQL01_Old Target 10.97.230.80 SQL02 SQL01 Table 1 – Alias List If you or somebody set up connections via IP address, you deserve to have to go to each app and fix it by hand.  That is the only way to fix that particular foul-up. If have to deal with Named Instances either as a source or a target, then it gets more complicated.  The standard fix is to use the SQL Server Configuration Manager (or one of its earlier incarnations) to create a SQL client alias to redirect the connection.  This can be a pain installing and configuring the app on multiple client servers.  The good news is that SQL Server Configuration Manager AND all of its earlier versions simply write a few registry keys.  Extracting the keys into a .reg file makes centralized automated deployment a snap. If the client is a 32-bit system, you have to extract the native key.  If it is a 64-bit, you have to extract the native key and the WoW (32 bit on 64 bit host) key. First, pick a development system to create the actual registry key.  If you do this repeatedly, you can simply edit an existing registry file.  Create the entry using the SQL Configuration Manager.  You must use a 64-bit system to create the WoW key.  The following example redirects from a named instance “SQL01\SQLUtiluty” to a default instance on “SQL02”.   Figure 3 – SQL Server Configuration Manager - Native Figure 3 shows the native key listing. Figure 4 – SQL Server Configuration Manager – WoW If you think you don’t need the WoW key because your app is 64 it, think again.  SQL Server Management Server is a 32-bit app, as are most SQL test utilities.  Always create both keys for 64-bit target systems. Now that the keys exist, we can extract them into a .reg file. Fire up REGEDIT and browse to the following location:  HKLM\Software\Microsoft\MSSQLServer\Client\ConnectTo.  You can also search the registry for the string value of one of the server names (old or new). Right click on the “ConnectTo” label and choose “Export”.  Save with an appropriate name and location.  The resulting file should look something like this: Figure 5 – SQL01_Alias.reg Repeat the process with the location: HKLM\Software\Wow6432Node\Microsoft\MSSQLServer\Client\ConnectTo Note that if you have multiple alias entries, ALL of the entries will be exported.  In that case, you can edit the file and remove the extra aliases. You can edit the files together into a single file.  Just leave a blank line between new keys like this: Figure 6 – SQL01_Alias_All.reg Of course if you have an automatic way to deploy, it makes sense to have an automatic way to Un-deploy.  To delete a registry key, simply edit the .reg file and replace the target with a “-“ sign like so. Figure 7 – SQL01_Alias_UNDO.reg Now we have the ability to move any database to any server without having to install or change any applications on any client server.  The whole process should be transparent to the applications, which makes planning and coordinating database moves a far simpler task.

    Read the article

  • Disaster Recovery Discovery

    - by Rodney Landrum
    Last weekend I joined several of my IT staff on a mission to perform a DR test in our remote CoLo center in a large South East city of the US. Can I be more obtuse? The goal was simple for me as the sole DBA in a throng of Windows, Storage, Network and SAN admins – restore the databases and make them work. There were 4 applications that back ended to 7 SQL Server databases on 4 different SQL Server instances. We would maintain the original server names, but beyond that it was fair game. We had time to prepare so I was able to script out or otherwise automate the recovery process. I used sp_help_revlogin for three of the servers, a bit of a cheat actually because restoring the Master database on the target DR servers was the specified course of action according to the DR procedures ( the caveat “IF REQUIRED” left it open to interpretation. I really wanted to avoid the step of restoring Master for a number of reasons but mainly because I did not want to deal with issues starting SQL Services afterward. Having to account for the location of TempDB and the version conflicts of the resource DBs were just two of the battles I chose not to fight. Not to mention other system database location problems that might arise and prevent SQL from starting.  I was going to have to restore all of the user databases anyway, so I would not really gain any benefit, outside of logins, for taking the time to restore the source Master database over the newly installed one on the fresh server. What I wanted was the ability to restore the Master database as a user database, call it Master_Mine, from a backup on the source system and then use that restored database to script the SQL Logins and passwords on the DR systems. While I did not attempt this on the trip, the thought stuck in my mind and this past week I succeeded at scripting user accounts and passwords using only a restored copy of the Master database. Granted there were several challenges to overcome.  Also, as is usual for any work like this the usual disclaimers apply:  This is not something that I would imagine Microsoft would condone or support and this was really only an experiment for me to learn if it was even possible. While I have tested the process with success, I do not know that I would use this technique in a documented procedure because future updates for SQL Server will render this technique non-functional. I thought at first, incorrectly of course, that I could use sp_help_revlogin on a restored copy of the master database I named Master_Mine.   Since sp_help_revlogin uses system schema objects, sys.syslogins and sys.server_principals, this was not going to work because all results would come from the main Master database. To test this I added a SQL login via SSMS, backed up Master, restored  it as Master_Mine, and then deleted the login.  Even though the test account I created should presumably still be in the Master_Mine database, I should be able to get to it and script out its creation with its password hash so that I would not need to know the password, but any applications that stored that password would not have to be altered in the DR scenario. They would just work as expected. Once I realized that would not work I began looking deeper.  Knowing that sys.syslogins and sys.server_principals are system views, their underlying code should be available with sp_helptext, right? They were. And this led me to discover the two tables sys.sysxlgns and sys.sysprivs, where the data I needed was stored. These tables existed in both the real Master and the restored copy, Master_Mine.  I used this information to tweak the sp_help_revlogin stored procedure to use these tables instead to create the logins cursor used in sp_help_revlogin. For the password hash,  sp_help_revlogin uses the function LoginProperty() which takes a user name and option ‘passwordhash’ to return the hash for the user. Unfortunately, it requires the login to exist in the Master database. This would not work. So another slight modification I had to make was to pull the password hash itself (pwdhash from sys.sysxlgns) into the logins cursor and comment out the section of sp_help_revlogin that uses LoginProperty. Instead, I pass the pwdhash value as the variable @PWD_varbinary to the sp_hexadecimal stored procedure which is also created by and used within the code provided by Microsoft in the link above for sp_help_revlogin. The final challenge: sys.sysxlgns and sys.server_principals are visible only within a Dedicated Administrator Connection (DAC) query window in SSMS or within SQLCDMD.  To open a DAC connection you have to be logged in on the SQL Server itself, via RDP in my case,  and you preface the server name in the query connection with ADMIN:, so that the server connection looks like ADMIN:ServerName. From there you can create the modified stored procedure in the restored copy of a Master database from a source system as whatever name you like, and then run the modified stored procedure. I named my new stored procedure usp_help_revlogin_MyMaster. Upon execution I was happy to see the logins and password hashes that I needed to apply from the source Master database without having to restore over the new Master system database and without the need to access the original server (assuming it was down due to whatever disaster put it in that state). You will note that I am not providing full code samples here of the modifications. I will say that it was a slight bit of work and anyone who needed to do this for whatever reason, could fairly easily roll their own solution with the information provided herein.  My goal, as I said was to prove that this could be done and provide another option if required to ease the burden of getting SQL Servers up and available in an emergency situation where alternatives may be more challenging or otherwise unavailable.  

    Read the article

  • Synergy - easy share of keyboard and mouse between multiple computers

    Did you ever have the urge to share one set of keyboard and mouse between multiple machines? If so, please read on... Using multiple machines Honestly, as a software craftsman it is my daily business to run multiple machines - either physical or virtual - to be able to solve my customers' requirements. Recent hardware equipment allows this very easily. For laptops it's a no-brainer to attach a second or even a third screen in order to extend your native display. This works quite handy and in my case I used to attached two additional screens - one via HD15 connector, the other via HDMI. But... as it's a laptop and therefore a mobile unit there are slight restrictions. Detaching and re-attaching all cables when changing locations is one of them but hardware limitations, too. After all, it's a laptop and not a workstation. I guess, that anyone working in IT (or ICT) has more than one machine at their workplace or their home office and at least I find it quite annoying to have multiple sets of keyboard and mouse conquering my remaining space on my desk. Despite the ugly looks of all those cables and whatsoever 'chaos of distraction' I prefer a more clean solution and working environment. This allows me to actually focus on my work and tasks to do rather than to worry about choosing the right combination of keyboard/mouse. My current workplace is a patch work of various pieces of hardware (approx. 2-3 years): DIY desktop on Ubuntu 12.04 64-bit, Core2 Duo (E7400, 2.8GHz), 4GB RAM, 2x 250GB HDD, nVidia GPU 512MB Dell Inspiron 1525 on Windows 8 64-bit, 4GB RAM, 200GB HDD HP Compaq 6720s on Windows Vista 32-bit, Core2 Duo (T5670, 1.8GHz), 2GB RAM, 160GB HDD Mac mini on Mac OS X 10.7, Core i5 (2.3 GHz), 2GB RAM, 500GB HDD I know... Not the latest and greatest but a decent combination to work with. New system(s) is/are already on the shopping list but I live in the 'wrong' country to buy computer hardware. So, the next trip abroad will provide me with some new stuff. Using multiple operating systems The list of hardware above already names different operating systems, and actually I have only one preference: Linux. But still my job as a software craftsman for Visual FoxPro and .NET development requires other OSes, too. Not a big deal, it's just like this. Additionally to those physical machines, there are a bunch of virtual machines around. Most of them running either Windows XP or Windows 7. Since years I have the practice that each development for one customer is isolated into its own virtual machine and environment. This keeps it clean and version-safe. But as you can easily imagine with that setup there are a couple of constraints referring to keyboard and mouse. Usually, those systems require their own pieces of hardware attached. As stated, I don't like clutter on my desk's surface, so a cross-platform solution has to come in here. In the past, I tried it with various applications, hardware or network protocols like X11, RDP, NX, TeamViewer, RAdmin, KVM switch, etc. but the problem in this case is that they either allow you to remotely connect to the other system or exclusively 'bind' your peripherals to the active system. Not optimal after all. Synergy to the rescue Quote from their website: "Synergy lets you easily share your mouse and keyboard between multiple computers on your desk, and it's Free and Open Source. Just move your mouse off the edge of one computer's screen on to another. You can even share all of your clipboards. All you need is a network connection. Synergy is cross-platform (works on Windows, Mac OS X and Linux)." Yep, that's it! All I need for my setup here... Actually, I couldn't believe it myself that I didn't stumble over synergy earlier but 'Get over it' and there we go. And despite the fact that it is Open Source, no, it's also for free. Donations for the developers are very welcome and recently they introduced Synergy Premium. A possibility to buy so-called premium votes that can be used to put more weight / importance on specific issues or bugs that you would like the developers to look into. Installation and configuration Simply download the installation packages for your systems of choice, run the installer and enter some minor information about your network setup. I chose my desktop machine for the role of the Synergy server and configured my screen setup as follows: The screen setup allows you currently to build or connect up to 15 machines. The number of screens can be higher as those machine might have multiple screens physically attached. Synergy takes this into the overall calculations and simply works as expected. I tried it for fun with a second monitor each connected to both laptops to have a total number of 6 active screens. No flaws after all - stunning! All the other machines are configured as clients like so: Side note: The screenshot was taken on Windows 8 and pasted via clipboard into Gimp running on Ubuntu. Resume Synergy is now definitely in my box of tools for my daily work, and amongst the first pieces of software I install after the operating system. It just simplifies my life and cleans my desk. Never again without Synergy!Now, only waiting for an Android version to integrate my Galaxy Tab 10.1, too. ;-) Please, check out that superb product and enjoy sharing one keyboard, one mouse and one clipboard between your various machines and operating systems.

    Read the article

  • SQL 2008 R2 login/network issue

    - by martinjd
    I have a Windows Server 2008 R2 new clean install , not a VM, that I have added to a Windows Server 2003 based domain using my account which has domain admin rights. The domain functional level is 2003. I performed a clean install of SQL Server 2008 R2 using my account which has domain admin rights. The installation completed without any errors. I logged into SSMS locally and attempted to add another domain account by clicking Search, Advanced and finding the user in the domain. When I return to the "Dialog - New" window and click OK I receive the following error: Create failed for Login 'Domain\User'. (Microsoft.SqlServer.Smo) An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) Windows NT user or group 'Domain\User' not found. Check the name again. (Microsoft SQL Server, Error: 15401) I have verified that the firewall is off, tried adding a different domain user, tried using SA to add a user, installed the hotfix for KB 976494 and verified that the Local Security Policy for Domain Member: Digitally encrypt or sign secure channel Domain Member: Digitally encrypt secure channel Domain Member: Digitally sign secure channel are disabled none of which have made a difference. I can RDP to a Server 2003 server running SQL 2008 and add the same domain user without issue. Also if I try to connect with SSMS to the sql server from another system on the domain using my account I get the following error: Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. (Microsoft SQL Server, Error: 18452) and on the database server I see the following in the security event log: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: myUserName Account Domain: MYDOMAIN Failure Information: Failure Reason: An Error occured during Logon. Status: 0xc000018d Sub Status: 0x0 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: MYWKS Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I am sure that the "NULL SID" has some significant meaning but have no idea at this point what the issue could be.

    Read the article

  • VB6 app not executing as scheduled task unless user is logged on

    - by Tedd Hansen
    Hi Would greatly apprechiate some help on this one! It may be a tricky one. :) Problem I have an VB6 application which is set up as scheduled task. It starts every time, but when executing CreateObject it fails if user is not logged on to computer. I am looking for information on what could cause this. Primary suspicion is that some Windows API fails. Key points Behaviour confirmed on Windows 2000, 2003, 2008 and Vista. The application executes as user X at scheduled time, executed by Windows Task Scheduler. It executes every time. Application does start! -- If user X is logged on via RDP it runs perfectly. (Note that user doesn't need to be connected, only logged on) -- If user X is not logged on to computer the application fails. Failure point Application fails when using CreateObject() to instansiate a DCOM object which is also part of the application. The DCOM objects declare .dll-references at startup (globally/on top of .bas-file) and run a small startup function. Failure must be during startup, possibly in one of the .dll-declarations. Thoughts After some Googling my initial suspicion was directed at MAPI. From what I could see MAPI required user to be logged on. The application has MAPI references. But even with all MAPI references removed it still does not work. What is the difference if an user is logged on? Registry mapping? Environment? explorer.exe is running. Isn't the user logged on when application executes as the user? What info would help? A definitive answer would be truly great. Any information regarding any VB6 feature/Windows API that could act differently depending on wether user is logged on or not would definitively help. Similar experiences may lead me in the right direction. Tips on debuggin this. Thanks! :)

    Read the article

  • Cisco VPN Client dropping connection

    - by IT Team
    Using Windows XP and Cisco VPN client version 5.0.4.xxx to connect to a remote customer site. We are able to establish the connection and start an RDP session, but within 1-2 minutes the connection drops and the VPN connection disconnects. The PC making the connection is on a DMZ which is NATed to a public IP address. If we move the PC directly onto the internet without being on the DMZ the connection works and we don't encounter any disconnects. We use a PIX 515E running 7.2.4 and don't have any problems with similar setups connecting to other customer sites from the DMZ. The VPN setup on the client side is pretty basic, using IPSec over TCP port 10000. Not sure what device they are using on the peer, but my guess would be an ASA. Any idea as to what the problem would be? Below is the logs from the VPN client when the problem occurs. The real IP address has been changed to: RemotePeerIP. 4 14:39:30.593 09/23/09 Sev=Info/4 CM/0x63100024 Attempt connection with server "RemotePeerIP" 5 14:39:30.593 09/23/09 Sev=Info/6 CM/0x6310002F Allocated local TCP port 1942 for TCP connection. 6 14:39:30.796 09/23/09 Sev=Info/4 IPSEC/0x63700008 IPSec driver successfully started 7 14:39:30.796 09/23/09 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 8 14:39:30.796 09/23/09 Sev=Info/6 IPSEC/0x6370002C Sent 256 packets, 0 were fragmented. 9 14:39:30.796 09/23/09 Sev=Info/6 IPSEC/0x63700020 TCP SYN sent to RemotePeerIP, src port 1942, dst port 10000 10 14:39:30.796 09/23/09 Sev=Info/6 IPSEC/0x6370001C TCP SYN-ACK received from RemotePeerIP, src port 10000, dst port 1942 11 14:39:30.796 09/23/09 Sev=Info/6 IPSEC/0x63700021 TCP ACK sent to RemotePeerIP, src port 1942, dst port 10000 12 14:39:30.796 09/23/09 Sev=Warning/3 IPSEC/0xA370001C Bad cTCP trailer, Rsvd 26984, Magic# 63697672h, trailer len 101, MajorVer 13, MinorVer 10 13 14:39:30.796 09/23/09 Sev=Info/4 CM/0x63100029 TCP connection established on port 10000 with server "RemotePeerIP" 14 14:39:31.296 09/23/09 Sev=Info/4 CM/0x63100024 Attempt connection with server "RemotePeerIP" 15 14:39:31.296 09/23/09 Sev=Info/6 IKE/0x6300003B Attempting to establish a connection with RemotePeerIP. 16 14:39:31.296 09/23/09 Sev=Info/4 IKE/0x63000013 SENDING ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Unity)) to RemotePeerIP 17 14:39:36.296 09/23/09 Sev=Info/4 IKE/0x63000021 Retransmitting last packet! 18 14:39:36.296 09/23/09 Sev=Info/4 IKE/0x63000013 SENDING ISAKMP OAK AG (Retransmission) to RemotePeerIP 19 14:39:41.296 09/23/09 Sev=Info/4 IKE/0x63000021 Retransmitting last packet! 20 14:39:41.296 09/23/09 Sev=Info/4 IKE/0x63000013 SENDING ISAKMP OAK AG (Retransmission) to RemotePeerIP 21 14:39:46.296 09/23/09 Sev=Info/4 IKE/0x63000021 Retransmitting last packet! 22 14:39:46.296 09/23/09 Sev=Info/4 IKE/0x63000013 SENDING ISAKMP OAK AG (Retransmission) to RemotePeerIP 23 14:39:51.328 09/23/09 Sev=Info/4 IKE/0x63000017 Marking IKE SA for deletion (I_Cookie=AEFC3FFF0405BBD6 R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING 24 14:39:51.828 09/23/09 Sev=Info/4 IKE/0x6300004B Discarding IKE SA negotiation (I_Cookie=AEFC3FFF0405BBD6 R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING 25 14:39:51.828 09/23/09 Sev=Info/4 CM/0x63100014 Unable to establish Phase 1 SA with server "RemotePeerIP" because of "DEL_REASON_PEER_NOT_RESPONDING" 26 14:39:51.828 09/23/09 Sev=Info/5 CM/0x63100025 Initializing CVPNDrv 27 14:39:51.828 09/23/09 Sev=Info/4 CM/0x6310002D Resetting TCP connection on port 10000 28 14:39:51.828 09/23/09 Sev=Info/6 CM/0x63100030 Removed local TCP port 1942 for TCP connection. 29 14:39:51.828 09/23/09 Sev=Info/6 CM/0x63100046 Set tunnel established flag in registry to 0. 30 14:39:51.828 09/23/09 Sev=Info/4 IKE/0x63000001 IKE received signal to terminate VPN connection 31 14:39:52.328 09/23/09 Sev=Info/6 IPSEC/0x63700023 TCP RST sent to RemotePeerIP, src port 1942, dst port 10000 32 14:39:52.328 09/23/09 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 33 14:39:52.328 09/23/09 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 34 14:39:52.328 09/23/09 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 35 14:39:52.328 09/23/09 Sev=Info/4 IPSEC/0x6370000A IPSec driver successfully stopped Thank you for any help you can provide.

    Read the article

  • ufw portforwarding to virtualbox guest

    - by user85116
    My goal is to be able to connect using remote desktop on my desktop machine, to windows xp running in virtualbox on my linux server. My setup: server = debian squeeze, 64 bit, with a public IP address (host) virtualbox-ose 3.2.10 (from debian repo) windows xp running inside VBox as a guest; bridged networking mode in VBox, ip = 192.168.1.100 ufw as the firewall on debian, 3 ports are opened: 22 / ssh, 80 / apache, and 3389 for remote desktop My problem: If I try to use remote desktop on my home computer, I am unable to connect to the windows guest. If I first "ssh -X -C" into the debian server, then run "rdesktop 192.168.1.100", I am able to connect without issue. The windows firewall was configured to allow remote desktop connections, and I've even turned it off (as it is redundant here) to see if that was the problem but it made no difference. Since I am able to connect from inside the local subnet, I suspect that I have not setup my debian firewall correctly to handle connections from outside the LAN. Here is what I've done... First my ufw status: ufw status Status: active To Action From -- ------ ---- 22 ALLOW Anywhere 80 ALLOW Anywhere 3389 ALLOW Anywhere I edited /etc/ufw/sysctl.conf and added: net/ipv4/ip_forward=1 Edited /etc/default/ufw and added: DEFAULT_FORWARD_POLICY="ACCEPT" Edited /etc/ufw/before.rules and added: # setup port forwarding to forward rdp to windows VM *nat :PREROUTING - [0:0] -A PREROUTING -i eth0 -p tcp --dport 3389 -j DNAT --to-destination 192.168.1.100 -A PREROUTING -i eth0 -p udp --dport 3389 -j DNAT --to-destination 192.168.1.100 COMMIT # Don't delete these required lines, otherwise there will be errors *filter <snip> Restarted the firewall etc., but no connection. My log files on the debian host show this (my public ip address was removed for this posting but it is correct in the actual log): Feb 6 11:11:21 localhost kernel: [171991.856941] [UFW AUDIT] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27518 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:21 localhost kernel: [171991.856963] [UFW ALLOW] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27518 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:24 localhost kernel: [171994.856701] [UFW AUDIT] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27519 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:24 localhost kernel: [171994.856723] [UFW ALLOW] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27519 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:30 localhost kernel: [172000.856656] [UFW AUDIT] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27520 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:30 localhost kernel: [172000.856678] [UFW ALLOW] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27520 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Although this is the current setup / configuration, I've also tried several variations of this; I thought maybe the ISP would be blocking 3389 for some reason and tried using different ports, but again there was no connection. Any ideas...? Did I forget to modify some file somewhere?

    Read the article

  • NTFS Permissions - Access Denied even though Explicit Allow and no Deny

    - by chris613
    I'm hoping someone can help me with this NTFS permissions problem. The short version is that I can't write a new file in F:\SomeDir even though I seem to be granted full permissions via both the "Domain Admins" group and a second unprivileged group. The "Effective Permissions" tab in the explorer permissions UI shows that I have full control, and there are no "Deny"s anywhere in the ACL or anything else that looks unusual. I am logged into the machine over RDP and accessing the disk directly, not through a share. F:\SomeDir>set U USERDNSDOMAIN=THEOFFICE.LOCAL USERDOMAIN=THEOFFICE USERNAME=thisisme USERPROFILE=C:\Users\thisisme F:\SomeDir>icacls . . BUILTIN\Administrators:(I)(F) CREATOR OWNER:(I)(OI)(CI)(IO)(F) THEOFFICE\Domain Admins:(I)(OI)(CI)(F) NT AUTHORITY\SYSTEM:(I)(OI)(CI)(F) BUILTIN\Administrators:(I)(OI)(CI)(IO)(F) BUILTIN\Users:(I)(OI)(CI)(RX) Successfully processed 1 files; Failed processing 0 files F:\SomeDir>net group /domain "Domain Admins" The request will be processed at a domain controller for domain THEOFFICE.local. Group name Domain Admins Comment Designated administrators of the domain Members ------------------------------------------------------------------------------- Administrator thatguy thisisme The command completed successfully. F:\SomeDir>echo "whyUNoCreateFile?" > whyUNoCreateFile.txt Access is denied. I searched for answers and came across similar problems that lead to UAC (ex. Why does removing the EVERYONE group prevent domain admins from accessing a drive? ). I can't turn off UAC at the moment, so I try a "regular" group that I'm also part of. This group has no special rights assignments and is not part of any administrative groups. Still no dice: [***** This one command executed in an elevated shell *****] F:\SomeDir>icacls . /grant THEOFFICE\iteveryone:(OI)(CI)F processed file: . Successfully processed 1 files; Failed processing 0 files F:\SomeDir>net group /domain "iteveryone" The request will be processed at a domain controller for domain THEOFFICE.local. Group name ITeveryone Comment Members ------------------------------------------------------------------------------- Administrator thatguy thisisme otherguy someitguy The command completed successfully. F:\ScanningVMsForIBM>echo y > u Access is denied. As you can see, using a "regular" group didn't help. I have logged out and back in to the server to ensure my login token is up to date, and at any rate I belonged to these groups before the server was created. If I grant explicit permission to myself, it does allow me to write files: [***** This one command executed in an elevated shell *****] F:\SomeDir>icacls . /grant THEOFFICE\thisisme:(OI)(CI)F processed file: . Successfully processed 1 files; Failed processing 0 files F:\SomeDir>echo y > u F:\SomeDir>type u y My requirement is for the "Domain Admins" group to have Full Control, or if that's not possible without disabling UAC, then a second group will do, but I can't get either to work. I'm really stumped. Can someone please point out what I could be overlooking?

    Read the article

  • Remote Desktop failed logon event 4625 not logging correctly on 2008 Terminal Services server

    - by Zone12
    When I use the new remote desktop with ssl and try to log on with bad credentials it logs a 4625 event as expected. The problem is, it doesn't log the ip address, so I can't block malicious logons in our firewall. The event looks like this: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{00000000-0000-0000-0000-000000000000}" /> <EventID>4625</EventID> <Version>0</Version> <Level>0</Level> <Task>12544</Task> <Opcode>0</Opcode> <Keywords>0x8010000000000000</Keywords> <TimeCreated SystemTime="2012-04-13T06:52:36.499113600Z" /> <EventRecordID>467553</EventRecordID> <Correlation /> <Execution ProcessID="544" ThreadID="596" /> <Channel>Security</Channel> <Computer>ontheinternet</Computer> <Security /> </System> <EventData> <Data Name="SubjectUserSid">S-1-0-0</Data> <Data Name="SubjectUserName">-</Data> <Data Name="SubjectDomainName">-</Data> <Data Name="SubjectLogonId">0x0</Data> <Data Name="TargetUserSid">S-1-0-0</Data> <Data Name="TargetUserName">notauser</Data> <Data Name="TargetDomainName">MYSERVER-PC</Data> <Data Name="Status">0xc000006d</Data> <Data Name="FailureReason">%%2313</Data> <Data Name="SubStatus">0xc0000064</Data> <Data Name="LogonType">3</Data> <Data Name="LogonProcessName">NtLmSsp</Data> <Data Name="AuthenticationPackageName">NTLM</Data> <Data Name="WorkstationName">MYSERVER-PC</Data> <Data Name="TransmittedServices">-</Data> <Data Name="LmPackageName">-</Data> <Data Name="KeyLength">0</Data> <Data Name="ProcessId">0x0</Data> <Data Name="ProcessName">-</Data> <Data Name="IpAddress">-</Data> <Data Name="IpPort">-</Data> </EventData> </Event> It seems because the logon type is 3 and not 10 like the old rdp sessions, the ip address and other information is not stored. The machine I am trying to connect from is on the internet and not on the same network as the server. Does anyone know where this information is stored (and what other events are generated with a failed logon)? Any help will be much appreciated.

    Read the article

  • How to prevent delays associated with IPv6 AAAA records?

    - by Nic
    Our Windows servers are registering IPv6 AAAA records with our Windows DNS servers. However, we don't have IPv6 routing enabled on our network, so this frequently causes stall behaviours. Microsoft RDP is the worst offender. When connecting to a server that has a AAAA record in DNS, the remote desktop client will try IPv6 first, and won't fall back to IPv4 until the connection times out. Power users can work around this by connecting to the IP address directly. Resolving the IPv4 address with ping -4 hostname.foo always works instantly. What can I do to avoid this delay? Disable IPv6 on client? Nope, Microsoft says IPv6 is a mandatory part of the Windows operating system. Too many clients to ensure this is set everywhere consistently. Will cause more problems later when we finally implement IPv6. Disable IPv6 on the server? Nope, Microsoft says IPv6 is a mandatory part of the Windows operating system. Requires an inconvenient registry hack to disable the entire IPv6 stack. Ensuring this is correctly set on all servers is inconvenient. Will cause more problems later when we finally implement IPv6. Mask IPv6 records on the user-facnig DNS recursor? Nope, we're using NLNet Unbound and it doesn't support that. Prevent registration of IPv6 AAAA records on the Microsoft DNS server? I don't think that's even possible. At this point, I'm considering writing a script that purges all AAAA records from our DNS zones. Please, help me find a better way. UPDATE: DNS resolution is not the problem. As @joeqwerty points out in his answer, the DNS records are returned instantly. Both A and AAAA records are immediately available. The problem is that some clients (mstsc.exe) will preferentially attempt a connection over IPv6, and take a while to fall back to IPv4. This seems like a routing problem. The ping command produces a "General failure" error message because the destination address is unroutable. C:\Windows\system32>ping myhost.mydomain Pinging myhost.mydomain [2002:1234:1234::1234:1234] with 32 bytes of data: General failure. General failure. General failure. General failure. Ping statistics for 2002:1234:1234::1234:1234: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), I can't get a packet capture of this behaviour. Running this (failing) ping command does not produce any packets in Microsoft Network Monitor. Similarly, attempting a connection with mstsc.exe to a host with an AAAA record produces no traffic until it does a fallback to IPv4. UPDATE: Our hosts are all using publicly-routable IPv4 addresses. I think this problem might come down to a broken 6to4 configuration. 6to4 behaves differently on hosts with public IP addresses vs RFC1918 addresses. UPDATE: There is definitely something fishy with 6to4 on my network. When I disable 6to4 on the Windows client, connections resolve instantly. netsh int ipv6 6to4 set state disabled But as @joeqwerty says, this only masks the problem. I'm still trying to find out why IPv6 communication on our network is completely non-working.

    Read the article

  • What would cause an .exe to vanish without a trace?

    - by Peter pete
    I have a few computers. One computer, at home, one day suddenly had its pgbouncer.exe vanish. The antivirus didn't have it in its virus chest [avast]. I couldn't find the bgbouncer anywhere. All the other pgbouncer files remained where they used to be, except the exe had vanished. I hadn't uninstalled it, nor had anyone else used the machine. I hadn't installed any new software since the previous time I had used it either. Just now, however, my TV computer was running out of disk space, which was weird because I had python setup to do transcoding and archiving. I logged in and voila! python.exe had vanished !! Once again, Avast.exe didn't have it in its virus chest, and dunno! I do this time, with the TV computer, know exactly the date that python vanished. Sat the 18th my python scripts ran fine. Sat the 19th python was gone. I'm going to do some hunting in the event log to see what happened that day. But if anyone has experienced vanishings before and has a clue what happened, I would like to know. FYI: Both computers (bgbouncer vanish and python vanish) were running Win7 with the RDP hack and both on SSDs and both with Avast. Both computers had all windows updates set to manual(to prevent random stuff changing!) and neither had recently had any windows updates manually applied. FYI2: Tv computer had since the beginning of October dropbox running all the time trying to download two files. Sadly, a temporary download of each of these two files by dropbox resulted in Avast freaking out and virus-chesting them, and then dropbox downloading them partially again, before being dropboxed. Now, these two files were binaries from a program I had personally written and were clean on other machines. Since the python vanishing I have deleted these two binaries from dropbox (using the website) and dropbox exe on the tv computer is now at peace. I don't think this should cause python.exe to vanish though :/ New edit: On the 18/10/2013, at 0742 my python script ended with an error: "file still in use" which was unexpected but I shrugged it off since sometimes media portal doesn't release the recording. But on second thoughts is weird since the show in use would have been finished recording the day before. On the 18/10/2013 at 0807 the windows event log complains that several drivers required for CutePDF, send to onenote 2010, send to onenote 2013, microsoft xps document writer aren't installed. I just checked now and indeed those printers have vanished! New update! I found my python.exe that had been removed. It was still in the C:\Python33\ directory except it had been renamed to a random string charater.tmp (ie, it was made into a temp file) with a creation date of 19/10/2013 at 0600:02 am. Now, the computer normally wakes at 6am to do transcoding. What could have moved my python file into a tmp file?

    Read the article

  • Remote Desktop to Your Azure Virtual Machine

    - by Shaun
    The Windows Azure Team had just published their new development portal this week and the SDK 1.3. Within this new release there are a lot of cool feature available. The one I’m looking forward to is Remote Desktop Access to your running Windows Azure Virtual Machine.   Configuration Remote Desktop Access It would be very simple to make the azure service enable the remote desktop access. First of all let’s create a new windows azure project from the Visual Studio. In this example I just created a normal MVC 2 web role without any modifications. Then we right-click the azure project node in the solution explorer window and select “Publish”. Then let’s select the “Deploy your Windows Azure project to Windows Azure” on the top radio button. And then select the credential, deployment service/slot, storage and label as susal. You must have the Management API Certificates uploaded to your Windows Azure account, and install the certification on you machine before in order to use this one-click deployment feature. If you are familiar with this dialog you will notice that there’s a linkage named “Configure Remote Desktop connections”. Here is where you need to make this service enable the remote desktop feature. After clicked this link we will set the configuration of the remote desktop access authorization information. There are 4 steps we need to do to configure our access. Certificates: We need either create or select a certificate file in order to encypt the access cerdenticals. In this example I will use the certificate file for my Management API. Username: The remote desktop user name to access the virtual machine. Password: The password for the access. Expiration: The access cerdentals would be expired after 1 month by default but we can amend here. After that we clicked the OK button to back to the publish dialog.   The next step is to back to the new windows azure portal and navigate to the hosted services list. I created a new hosted service and upload the certificate file onto this service. The user name and password access to the azure machine must be encrypted from the local machine, and then send to the windows azure platform, then decrypted on the azure side by the same file. This is why we need to upload the certificate file onto azure. We navigated to the “Hosted Services, Storage Accounts & CDN"” from the left panel and created a new hosted service named “SDK13” and selected the “Certificates” node. Then we clicked the “Add Certificates” button. Then we select the local certificate file and the password to install it into this azure service.   The final step would be back to our Visual Studio and in the pulish dialog just click the OK button. The Visual Studio will upload our package and the configuration into our service with the remote desktop settings.   Remote Desktop Access to Azure Virtual Machine All things had been done, let’s have a look back on the Windows Azure Development Portal. If I selected the web role that I had just published we can see on the toolbar there’s a section named “Remote Access”. In this section the Enable checkbox had been checked which means this role has the Remote Desktop Access feature enabled. If we want to modify the access cerdentals we can simply click the Configure button. Then we can update the user name, password, certificates and the expiration date.   Let’s select the instance node under the web role. In this case I just created one instance for demo. We can see that when we selected the instance node, the Connect button turned enabled. After clicked this button there will be a RDP file downloaded. This is a Remote Desctop configuration file that we can use to access to our azure virtual machine. Let’s download it to our local machine and execute. We input the user name and password we specified when we published our application to azure and then click OK. There might be some certificates warning dislog appeared. This is because the certificates we use to encryption is not signed by a trusted provider. Just select OK in these cases as we know the certificate is safty to us. Finally, the virtual machine of Windows Azure appeared.   A Quick Look into the Azure Virtual Machine Let’s just have a very quick look into our virtual machine. There are 3 disks available for us: C, D and E. Disk C: Store the local resource, diagnosis information, etc. Disk D: System disk which contains the OS, IIS, .NET Frameworks, etc. Disk E: Sotre our application code. The IIS which hosting our webiste on Azure. The IP configuration of the azure virtual machine.   Summary In this post I covered one of the new feature of the Azure SDK 1.3 – Remote Desktop Access. We can set the access per service and all of the instances of this service could be accessed through the remote desktop tool. With this feature we can deep into the virtual machines of our instances to see the inner information such as the system event, IIS log, system information, etc. But we should pay attention to modify the system settings. 2 reasons from what I know for now: 1. If we have more than one instances against our service we should ensure that all system settings we modifed are applied to all instances/virtual machines. Otherwise, as the machines are under the azure load balance proxy our application process may doesn’t work due to the defferent settings between the instances. 2. When the virtual machine encounted some problem and need to be translated to another physical machine all settings we made would be disappeared.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • CodePlex Daily Summary for Monday, July 01, 2013

    CodePlex Daily Summary for Monday, July 01, 2013Popular ReleasesQuickMon: Version 2.10.3: Mainly just a service release - no major changes. Toolbar buttons on main and config window can now be re-arrange (using ALT key) Added property to disable corrective scriptsDotNetNuke® IFrame: IFrame 04.05.00: New DNN6/7 Manifest file and Azure Compatibility.VidCoder: 1.5.2 Beta: Fixed crash on presets with an invalid bitrate.Roadkill - .NET Wiki engine: Roadkill v1.7: New features in 1.7: New file manager: Multiple file uploads Drag and drop uploads Delete folders (admins only) Delete files (admins only) (Experimental) Syntaxhighlighting custom variable (using https://github.com/alexgorbatchev/SyntaxHighlighter) - use [[[code lang=c#|your code here]]] (Experimental) MathJax custom variable - use [[[Mathjax]]] and $$your tex$$ on the page. Improved black bar theme Site speed improvements for Javascript/CSS files - now just two files files ea...Download Sharepoint Solution package: Release 4: version updated for SP2013WinRT XAML Toolkit: WinRT XAML Toolkit - 1.5: WinRT XAML Toolkit based on the Windows 8.0 and 8.1 Preview SDKs. Do not download the source code from here if you are looking for latest updates! You can download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Composition library for visual tree rende...Gardens Point LEX: Gardens Point LEX version 1.2.1: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.2.1 has new facilities for defining and manipulating character classes. These changes make the construction of large Unicode character classes more convenient. The runtime code for performing automaton backup has been re-implemented, and is now faster for scanners that need backup. Source CodeThe distribution contains a complete VS2010 project for the appli...ZXMAK2: Version 2.7.5.7: - fix TZX emulation (Bruce Lee, Zynaps) - fix ATM 16 colors for border - add memory module PROFI 512K; add PROFI V03 rom image; fix PROFI 3.XX configTwitter image Downloader: Twitter Image Downloader 2 with Installer: Application file with Install shield and Dot Net 4.0 redistributableUltimate Music Tagger: Ultimate Music Tagger 1.0.0.0: First release of Ultimate Music TaggerBlackJumboDog: Ver5.9.2: 2013.06.28 Ver5.9.2 (1) ??????????(????SMTP?????)?????????? (2) HTTPS???????????Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.95: update parser to allow for CSS3 calc( function to nest. add recognition of -pponly (Preprocess-Only) switch in AjaxMinManifestTask build task. Fix crashing bug in EXE when processing a manifest file using the -xml switch and an error message needs to be displayed (like a missing input file). Create separate Clean and Bundle build tasks for working with manifest files (AjaxMinManifestCleanTask and AjaxMinBundleTask). Removed the IsCleanOperation from AjaxMinManifestTask -- use AjaxMinMan...VG-Ripper & PG-Ripper: VG-Ripper 2.9.44: changes NEW: Added Support for "ImgChili.net" links FIXED: Auto UpdaterDocument.Editor: 2013.25: What's new for Document.Editor 2013.25: Improved Spell Check support Improved User Interface Minor Bug Fix's, improvements and speed upsNew ProjectsAerCloud.net Client - Java, Linux & Windows: This project source code provides a step by step guide for using AerCloud.net Framework as a Service API. For more information please visit http://www.aercloudAmiClient – Asterisk Manager Interface (AMI) client based on the Rx Framework: Asterisk Manager Interface (AMI) client based on the Rx Frameworkbaidupan: cdcddddC#??????: C#??????ImageHelper: imagehelperIP switcher: IP switcher is a simple tool for switching settings, and store presets, on networkadapters.MastersProject: A MS project with a goal of creating a fully Code Contracts verified physics engine and a relatively simple game that uses it.Multiplatform card game: Example multipatform project.PhoneTools: A collection of tools designed to help developers create beautiful Windows Phone 8 apps.rodidexter: lllSharePoint 2013 List Item Encryption: This coding exercise project enables you to encrypt/decrypt list item text field in the browser using industry standard algorithms.tvaSoft: simulation, rotor dynamics, Finite Element Analisys, FEM, ODE, torsional vibration, flexural vibrationX3DML Project: X3DML is an xml-based markup language that defines rules for modeling 3D scenes from a tag-based document. It may be usefull in 3D web design and VR.zhuang-tfs: zhuang tfs

    Read the article

  • CodePlex Daily Summary for Tuesday, July 02, 2013

    CodePlex Daily Summary for Tuesday, July 02, 2013Popular ReleasesMastersign.Expressions: Mastersign.Expressions v0.4.2: added support for if(<cond>, <true-part>, <false-part>) fixed multithreading issue with rand() improved demo applicationNB_Store - Free DotNetNuke Ecommerce Catalog Module: NB_Store v2.3.6 Rel0: v2.3.6 Is now DNN6 and DNN7 compatible Important : During update this install with overwrite the menu.xml setting, if you have changed this then make a backup before you upgrade and reapply your changes after the upgrade. Please view the following documentation if you are installing and configuring this module for the first time System Requirements Skill requirements Downloads and documents Step by step guide to a working store Please ask all questions in the Discussions tab. Document.Editor: 2013.26: What's new for Document.Editor 2013.26: New Insert Chart Improved User Interface Minor Bug Fix's, improvements and speed upsWsus Package Publisher: Release V1.2.1307.01: Fix an issue in the UI, approvals are not shown correctly in the 'Report' tabDirectX Tool Kit: July 2013: July 1, 2013 VS 2013 Preview projects added and updates for DirectXMath 3.05 vectorcall Added use of sRGB WIC metadata for JPEG, PNG, and TIFF SaveToWIC functions updated with new optional setCustomProps parameter and error check with optional targetFormatCore Server 2012 Powershell Script Hyper-v Manager: new_root.zip: Verison 1.0JSON Toolkit: JSON Toolkit 4.1.736: Improved strinfigy performance New serializing feature New anonymous type support in constructorsDotNetNuke® IFrame: IFrame 04.05.00: New DNN6/7 Manifest file and Azure Compatibility.VidCoder: 1.5.2 Beta: Fixed crash on presets with an invalid bitrate.Gardens Point LEX: Gardens Point LEX version 1.2.1: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.2.1 has new facilities for defining and manipulating character classes. These changes make the construction of large Unicode character classes more convenient. The runtime code for performing automaton backup has been re-implemented, and is now faster for scanners that need backup. Source CodeThe distribution contains a complete VS2010 project for the appli...ZXMAK2: Version 2.7.5.7: - fix TZX emulation (Bruce Lee, Zynaps) - fix ATM 16 colors for border - add memory module PROFI 512K; add PROFI V03 rom image; fix PROFI 3.XX configTwitter image Downloader: Twitter Image Downloader 2 with Installer: Application file with Install shield and Dot Net 4.0 redistributableUltimate Music Tagger: Ultimate Music Tagger 1.0.0.0: First release of Ultimate Music TaggerBlackJumboDog: Ver5.9.2: 2013.06.28 Ver5.9.2 (1) ??????????(????SMTP?????)?????????? (2) HTTPS???????????Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...New ProjectsALM Rangers DevOps Tooling and Guidance: Practical tooling and guidance that will enable teams to realize a faster deployment based on continuous feedback.Core Server 2012 Powershell Script Hyper-v Manager: Free core Server 2012 powershell scripts and batch files that replace the non-existent hyper-v manager, vmconnect and mstsc.Enhanced Deployment Service (EDS): EDS is a web service based utility designed to extend the deployment capabilities of administrators with the Microsoft Deployment Toolkit.ExtendedDialogBox: Libreria DialogBoxJazdy: This project is here only because we wanted to take advantage of a public git server.Mon Examen: This web interface is meant to make examinationsneet: summaryOrchard Multi-Choice Voting: A multiple choice voting Orchard module.Particle Swarm Optimization Solving Quadratic Assignment Problem: This project is submitted for the solving of QAP using PSO algorithms with addition of some modification Porjects: 23123123PPL Power Pack: PPL Power PackProperty Builder: Visual Studio tool for speeding up process of coding class properties getters and setters.RedRuler for Redline: I tried some on-screen rulers, none of them help me measure the UI element quickly based on the Redline. So I decided to created this handy RedRuler tool. Royale Living: Mahindra Royale Community PortalSearch and booking Hotel or Tours: Ð? án nghiên c?u c?a sinh viên tdt theo mô hình mvc 4SystemBuilder.Show: This tool is a helper after you create your project in visual studio to create the respective objects and interface. TalentDesk: new ptojectTcmplex: The Training Center teaches many different kind of course such as English, French, Computer hardware and computer softwareTFS Reporting Guide: Provides guidance and samples to enable TFS users to generate reports based on WIT data.Umbraco AdaptiveImages: Adaptive Images Package for UmbracoVirtualNet - A ILcode interpreter/emulator written in C++/Assembly: VirtualNet is a interpreter/emulator for running .net code in native without having to install the .Net FrameWorkVisual Blocks: Visual Blocks ????IDE ????? ??????? ????? ????/?? Visual Studio and Cloud Based Mobile Device Testing: Practical guidance enabling field to remove blockers to adoption and to use and extend the Perfecto Mobile Cloud Device testing within the context of VS.Windows 8 Time Picker for Windows Phone: A Windows Phone implementation of the Time Picker control found in the Windows 8.1 Alarms app.???? - SmallBasic?: ?????????

    Read the article

< Previous Page | 24 25 26 27 28 29  | Next Page >