Search Results

Search found 12281 results on 492 pages for 'ip blocking'.

Page 280/492 | < Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >

  • DNS NS and domain clarification

    - by thejartender
    I am really trying to get my home web server up and I don't seem to be succeeding. My web server withing my host system is running my web application and is viewable at the current isp ip 88.89.190.171 over WAN indicating that the webapp is fine and that router ports are forwarded. I have set up a DNS on this system with a single name server in the network and I manage to ping it with ping ns.thejarbar.org I have registered this private name server at my current hosting provider. My domain (thejarbar.org) is obviously registered and I have pointed it to my name server. My question here is if it is simply a matter of waiting on propagation for me to be able to ping my domain? Another way of asking this is if the fact that my name server is discoverable indicates that I have set it up correctly to be used? I have tested with dig and dig -x on my host and have A records for the name server. The server is not the Authorative server so I am concerned that this may be the reason why my site is not discoverable. Is there anything else I may need to so still? I only have one ns. currently, but should this succeed I will be purchasing a more stable secondary system to host my development applications. This is my best chance at getting work (freelance development) due to illness) and this I feel is the last step I need to succeed. Please note that this is temporarily a home server and I will most likely be using it as part of a professional setup very soon I will likely have to repeat this question therefore in a prefessional context in a few weeks as nothing will be different other than the fact that I am going to have a server running elsewhere. I am using bind9 and Ubuntu 12.10 and my records are: $TTL 3D @ IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); thejarbar.org. IN A 10.0.0.42 @ IN NS ns.thejarbar,org. yuccalaptop IN A 10.0.0.19 ns IN A 10.0.0.42 gw IN A 10.0.0.138 www IN CNAME thejarbar.org. $TTL 3D 0.0.10.in-addr.arpa. IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); 0.0.10.in-addr.arpa. IN NS ns.thejarbar.org. 42 IN PTR thejarbar.org. 19 IN PTR yuccalaptop.thejarbar.org. 138 IN PTR gw.thejarbar.org. My localhost IP is 10.0.0.42 I wish for this to be my host and name server.

    Read the article

  • NFS access from multiple networks

    - by Luke
    On my NFS server (Ubuntu) I have in /etc/exports the following: /share 192.168.89.1/24(rw,no_root_squash,async) However, I have a new machine which is not in 192.168.89.* IP range, it's in 192.168.92.* instead. How can I make this machine access my NFS server?

    Read the article

  • assign public domain on linux

    - by juanefren
    I have all my domains parked with Godaddy registrar, and now I have aquired a small dedicated server to migrate all my sites. How do I park my domains in the new site? The server is a Red Hat Enterprise Linux Box with Apache and Nginx running. The only way to access the server right now it's via IP address.

    Read the article

  • openvpn restriction

    - by zubin71
    hi, ive set up an openvpn server at my place and handed out a certificate to a client who has an openvpn client at his place. however i require that he should be able to connect to the vpn server only from one ip(his current one). how can i do this?

    Read the article

  • HTTPS request to a specific load-balanced virtual host (using Shibboleth for SSO)?

    - by Gary S. Weaver
    In one environment, we have three servers load balanced that have a single Tomcat instance on each, fronted by two different Apache virtual hosts. Each of those two virtual hosts (served by all three servers) has its own different load balancer. Internally, the first host (we'll call it barfoo) is served by port 443 (HTTPS) with its cert and the second host (we'll call it foobar) is served by port 1443 (HTTPS). When you hit foobar, it goes to the load balancer which is using IP affinity for that host, so you can easily test login/HTTPS on one of the servers serving foobar, but not the others (because you keep getting that server for the lifetime of the LB session, iirc). In addition, each of the servers are using Shibboleth v2 for authN/SSO, using mod_shib (iirc). So, a normal request to foobar hits the LB, is directed to the 3rd server (and will do that from then on for as long as the LB session lasts), then Apache, then to the Shibboleth SP which looks at the request, makes you login via negotiation with the Shibboleth IdP, then you hit Apache again which in turn hits Tomcat, renders, and returns the response. (I'm leaving out some steps there.) We'd like to hit one of the individual servers (foobar-03.acme.org which we'll say has IP 1.2.3.4) via HTTPS (skipping the load balancer), so we at first try putting this in /etc/hosts: 1.2.3.4 foobar.acme.org But since foobar.acme.org is a secondary virtual host running on 1443, it attempts to get barfoo.acme.org rather than foobar.acme.org at port 1443 and see that the cert for barfoo.acme.org is invalid for this case since it doesn't match the request's host, foobar.acme.org. I thought an ssh tunnel might be easy enough, so I tried: ssh -L 7777:foobar-03.acme.org:1443 [email protected] I tried just hitting https://localhost:7777/webappname in a browser, but when the Shibboleth login is over, it again tries to redirect to barfoo.acme.org, which is the default host for 443, and we get into an infinite redirect loop. I then tried setting up an SSH tunnel with privileged port 443 locally going to 443 of foobar-03.acme.org as the hostname for that virtual host: sudo ssh -L 443:foobar-03.acme.org:1443 [email protected] I also edited /etc/hosts to add: 127.0.0.1 foobar.acme.org This finally worked and I was able to get the browser to hit the individual HTTPS host at https://foobar.acme.org/webappname, bypassing the load balancer. This was a bit of a pain and wouldn't work for everyone, due to the requirement to use the local 443 port and ssh to the server. Is there an easier way to browse to and log into an individual host in this case?

    Read the article

  • Default Critique branch office setup: VPNTunnel->HQ, subnets for VOIP/PC, + several Q's

    - by CHickenTaragon
    We're setting up a new branch office. * ~10 users. * Each user has a VOIP phone provided by a hosted solution. * Users need access to resources on HQ (located in another state), so setting up VPN tunnel * HQ only supports certain Cisco/Juniper devices. VOIP provider only supports SonicWall, so current plan is to have two routers w/ separate subnets for VOIP vs. PC traffic. * PC's will plug into pass-thru Ethernet jacks on the VOIP phones, but the phones vs. PC's will point to different subnets. * Cable Modem is 50Mbps / 5Mbps DOCSIS 3.0 business line w/ 5 static IP's. * Each of the 2 subnets will map to one of the 5 public IP's. * May or may not also need to support a VPN tunnel with a second branch office because of a file server they have there that some in the new office use. I'm pushing to have them move the files to a server on the HQ's network so we don't have to worry about setting up an additional tunnel. Questions: Do you foresee any issues with the below set-up? Router recommendations by HQ IT staff: Cisco Router 2811, or Juniper SSG5 or SSG20. Any recommendations about these routers? We need Wi-Fi too – looks like the above routers have models that support this, any reason not to use this? Users need to be able to work from home. If so, how is authentication handled? Right now we use AD credentials for the HQ's domain, but we currently don't plan to have an AD system in the new location since it's only 10 users. We can't tie the authentication system from the new location's router to the AD system of the HQ. All the PC's that will be in the new location are currently in the existing office that is closing down, and are already joined to the domain of the HQ. Please confirm: this + the VPN tunnel will be sufficient for them to connect to authenticated resources on the HQ's network from the new location, correct? Mainly SQL servers and file servers, and a few remote desktop sessions. I'm sure I'll have some more questions, but can't think of them right now.

    Read the article

  • How do I force my Graphite Airport to distribute 192.168.x addresses instead of 10.x.x addresses?

    - by William
    I'm sharing a single IP address but there's no way to change what network it uses for distributing the private addresses via DHCP. My problem is that my VPN to work already uses the 10.x.x network, so I'd like my home to use 192.168.x. I've tried messing with the Network tab within the Airport Admin Utility for Graphite and Snow but nothing works. I'm hoping there's some way to hack the configuration file.

    Read the article

  • Local Apache Web server works only when connected to the net

    - by Jean
    Hello, I installed Ubunut and got the LAMP stack installed too. Now the problem is I have to be connected to the internet for the local apache webserver to work, else it does not. I changed the IP address on the dnshost, in the apache2.conf file, got the servername in the httpd.conf, which was empty. Any ideas guys. Thanks Jean

    Read the article

  • Symantec Gateway Security 320 VPN/Port Forwarding trouble

    - by Owl
    How do I check to see if port forward is enabled with one of my dynamic tunnels on this device? I'm having trouble using a feature in our software that requires a vpn to be used. My firewalls shows it as connected but I'm unable to ping the subnet ip. Our software vendor told me that port forwarding might be causing this problem, but I didn't set up this network I'm on and I don't fully know symantec hardware.

    Read the article

  • Transient network dropout for Xen DomU's

    - by Stephen C
    We've got a CentOS server running a cluster of virtuals. Occasionally the cluster's internal network drops out for a minute or so ... and then comes back. The problem is somehow related to the actual network traffic, but it is not a simple load issue. (The system is generally lightly loaded, and the problem occurs irrespective of actual load.) The setup: CentOS 5.6 on Dom0, various CentOS on the DomU's Hardware - a Dell R710 with a BroadCom NextXpress 2 NIC (sigh) using the latest drivers for the NIC from BroadCom Xen configured to use network-bridge and vif-bridge Some iptable tweaks to route an unrelated port to one of the virtuals. The system has one externally visible IP address, and Dom0 runs an Apache httpd configured with a number of virtual hosts each of which reverse proxies to web servers running on the virtuals. (The virtuals have to be NAT'ed, primarily because we don't have enough allocated public IP addresses.) The symptoms: Works fine most of the time. When someone tries to UPLOAD a large file to one virtuals, the internal network drops out ... for all virtuals: The Dom0 httpd sees a network timeout talking to the backend server on the virtual and reports a 502. A previously established ssh connection from Dom0 to any of the DomU's freezes. Our monitoring shows ping failures for traffic between virtuals. The Xen consoles to the DomU's do not freeze. No log messages in any log files that I can see, on either Dom0 or the DomU's ... apart from the Dom0 httpd logs. After a minute or so, the problem clears by itself. This is 100% reproducible. What we've tried: Downloading, building and installing the latest BNX2 driver on Dom0 Turning off MSI on the NIC - adding "options bnx2 disable_msi=1" to /etc/modprobe.conf Turning off tcp segmentation offload - "ethtool -K eth0 tso off". Sacrificing a black rooster at midnight. I've exhausted all my options apart from switching to KVM ... or slaughtering more roosters. Any suggestions?

    Read the article

  • Bittorrent surveillance/monitoring

    - by Flamewires
    Is there any tool to sniff bittorrent traffic and reassemble data about the torrent? Im looking for file names, peers, tracker address, local IP, etc. This is purely for academic interest in which all parties would be willing participants and therefore please dont upvote responses that talk merely about legal issues with using this kind of approach on a production network. I also am assuming that the torrent connections are unencrypted. Thanks

    Read the article

  • Manage computer from active directory manager

    - by Ripeed
    Within dsa.mac when I right-click on a computer and choose "Manage", it displays the following error message: Can't find path to computer \\computer.domain.tld. If I try ping computer.domain.tld, DNS translates it to an IP but the computer does not answer. It is right that ping does not answer? Pinging a computer that is not joined to the domain replies as expected. How can I correct this issue?

    Read the article

  • Apache / Postfix / Cyrus question

    - by Lerikun
    Apache: I have multiple domains on one hosting. I have a web-management software listening to port 3000 and one phpmyadmin. Can I restrict access to a certain domain? I mean that example.com:3000 will work and notexample.com:3000 not? (same for phpmyadmin) UPD: I have 3 IP's pointing to that host. Postfix/Cyrus: What is the right config to reject emails to mailboxes which do not even exist? (LDAP) Thanks

    Read the article

  • Sharing folder in a Virtual Private Windows Server 2008 R2 ?

    - by Triztian
    See Edit 2: Hello all, seems my involvement with computers has grown and I've found my self in the need to access a shared folder on a server. I've read some documentation and managed to set up the folder as a share, for this I created a local group and for now just one local user that has access to the share, the folder is in the public user folder and it's permissions should be (and I believe they are) read/write. The problem is that I can't connect from a remote machine I mean I don't know how the way it should be accessed, the server has a public IP and we use it also as a host to our website I don't know if that affects it though, the folder will be used as the "keeper" for the QuickBooks company files and has the database server manager installed. I've tried setting up a VPN Connection to the but no success. The server has a domain name a "http://www.example.com" that redirects to our website, I am unsure if it could be accessed that way, also the share has a location displayed when I right-click properties Heres what I've tried Setting up a VPN Connection (Windows Vista and 7) Got to the point where I got asked for credential and entered the user I created (which is not an admin) but I got a "Connection fail error 800" I suppose this is because in the domain field I entered the servers workgroup. right-click add network connection (Windows 7) Went through the wizard until I reached the point of entering the location, tried many things, the name in the share's properties(\\SOMETHING\Share), the http://www.example.com , the IP address I'm quite unfamiliar with this, so I have my guesses: Since the group and user are local they do not have access to the folder. The firewall in the server is blocking my connection. Anyways, any help and guidence is truly appreciated. EDIT 1: As @tony roth pointed out it may be a security fail, an I commented it out to management and said that that is not an issue, so please bare with me. EDIT 2: I've found out that the real question could be streamlined to "Sharing folder in a Virtual Private Server?", as thats what we have, a virtual private windows server 2008 R2, and I would like to know how to make it show like a normal folder in the client computer. Thanks again for all of your support.

    Read the article

  • Elastic Beanstalk and IIS logs

    - by user195744
    I have an ELB app and when logging into an instance and looking at the IIS logs I see something like the following: 2013-10-18 17:14:25 10.240.27.2 GET /FSViewer/Img.aspx trcid=451847431&vhtid=391833142 80 - 10.210.107.159 Mozilla/5.0+(compatible;+MSIE+10.0;+Windows+NT+6.1;+WOW64;+Trident/6.0) 200 0 0 140 The 10.240.27.2 address always repeated, which is the load balancer? So how do I find out the IP addresses that are hitting my server?

    Read the article

  • Postfix as mail relay for web servers?

    - by Ben Carleton
    Hi all, I want to set up Postfix to relay mail from a group of webservers. I would like to limit senders by IP so I can restrict the box to only my webservers, so I don't have an open relay and don't have to worry about authentication. So, what I guess I need is to limit inbound access but allow mail to be sent to any outbound address. I've looked through the docs and don't even know where to start, so any tips would be appreciated. Thanks!

    Read the article

  • Problem with vsftpd

    - by Mirage
    I have installed vsftpd on ubuntu 10.04 When i login using ip , username and passowrd then i straight go to home directory of user. is there any way that i can 1)Make separate user for only ftp 2)WHen they login via ftp, they should see the mounted drive i,e /media/shared_drive only not their home directory 3)They have all read and write access 4)Thanks

    Read the article

  • Routing all data through an VPN tunnel with ppp

    - by Oliver
    I'm trying to create a VPN tunnel that forwards all data from the local machine to the VPN server. I'm using ppp-2.4.5 for this with the following configuration: pty "pptp <VPNServer> --nolaunchpppd" name <my login name> remotename PPTP usepeerdns require-mppe-128 file /etc/ppp/options.pptp persist maxfail 0 holdoff 5 I have a script in if-up.d with the following content: route del default eth0 route add default dev ppp0 Before starting the VPN tunnel my routing looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 2 0 0 eth0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 After starting the tunnel (via pon) it looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 12.34.56.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 Now the problem is, that the VPN tunnel seems to be looped into itself. If I run ifconfig after a few seconds without any traffic: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.10 netmask 255.255.0.0 broadcast 192.168.255.255 ether 00:01:2e:2f:ff:35 txqueuelen 1000 (Ethernet) RX packets 39931 bytes 6784614 (6.4 MiB) RX errors 0 dropped 90 overruns 0 frame 0 TX packets 34980 bytes 7633181 (7.2 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 20 memory 0xfbdc0000-fbde0000 ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1496 inet 12.34.56.78 netmask 255.255.255.255 destination 12.34.56.1 ppp txqueuelen 3 (Point-to-Point Protocol) RX packets 7 bytes 94 (94.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 782863 bytes 349257986 (333.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 It states that already over 300 MiB have been send, ppp0 is only online since a few seconds and the connection isn't working anyway. Can someone please help me to fix the routing table, so that the traffic from ppp0 is not send again through ppp0 but instead goes to the remote server?

    Read the article

  • Unmanaged Network Switch vs Managed Network Switch

    - by David
    Currently I have an unmanaged POE switch connected to a Linksys router. I am thinking of upgrading my POE switch to a gigabit POE switch, the only problem is that the switch that I want to get is a managed switch. So here's my question: with a managed switch, can I still connect all of my devices to it and have the devices request IP addresses from the DHCP server within the Linksys router or will the devices request IPs from the managed switch since I believe the switch has its own DHCP server as well?

    Read the article

  • Watching Netflix through a VPN

    - by Sergio
    Recently I bought a VPS from DigitalOcean. I setup a PPTP VPN so I could watch us Netflix content from outside the US. Now that I have it setup and all my traffic is going through the VPN, Netflix is still showing my home country content. Pandora is working, and when I search my IP it shows im in NY, so I guess traffic is being routed correctly. I have also tried to delete flash settings and cookies from browser. Any ideas on what could be happening?

    Read the article

< Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >