Search Results

Search found 10651 results on 427 pages for 'modem manager'.

Page 280/427 | < Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >

• Remote Desktop connection breaks the wireless connection

  - by Michal Talaga

  When I connect to my Windows 8 Professional machine via Remote Desktop (RDP) I almost always get my WiFi connection broken. The setup: T61P Lenovo Laptop + W8 at home Wireless Router with NAT forwards connections to that machine Windows 7 laptop at work connecting to the home laptop When I connect, very often I get to login and suddenly connection is lost and I cannot reconnect again. When I get home I find my WiFi connection is still connected to the Access Point but does not function. Can't even ping the router. What is strange is that disabling wireless with the hardware switch and enabling it again doesn't help. The only way to make it works again: - Reboot - Disable wifi with hardware switch AND disable the network card in Device Manager, then enable both I did not have this problem on the very same laptop when it was running Windows 7. Any hint how can I find where the problem is?

  Read the article

• Does PCI bus really occupy 1.8GB

  - by Neil

  I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

  Read the article

• Making Windows 7 default to "All Files" when opening a document?

  - by krebshack

  I'm taking over an old coworkers job and part of that means I'll be working on various IFS tickets without any real ERP experience. I'm working with one user who is trying to check in documents in IFS. Right now, IFS defaults to JPEGs and then she has to select "All Files" in order find PDFs. Example: http://i.imgur.com/xK0iAfF.png As much as I'd like to say "it's one extra step, come on" the user's manager has insisted it interrupts her workflow and asked us to get on it. I've spoken with our IFS experts and they're unaware of any setting that would make the open dialog default to All Files in IFS. I've searched in Google for any setting in Windows 7 that would do that - but those have been unsuccessful - I keep getting results about changing which program opens a specific file type.

  Read the article

• How to get audio driver for compaq c700 ?

  - by Leena

  Hi, Initially i have audio driver and its works fine.But some times speaker was clear.So one of my friend installed some audio driver,after that totally disabled the volume. For that reason, i also tried to get audio driver and installed many times.Now i don't know many drivers .inf in my laptop.from device manager i have deleted the audio driver's,below i have attached the screen shot yours kind reference. Please help me to get audio drivers.First, i need to remove the unwanted drivers .inf files from laptop then i have to install the new audio driver. Experts,please suggest me to get audio driver without reinstall the OS. Details: Compaq c700 (i don't know model number) windows xp sp2 p/n : KT188PA#ACJ I appreciate your help.

  Read the article

• mysqld stopped working..can't restart...need help?

  - by grant tailor

  i was just checking somethings and noticed mysqld is not running in parallels power panel control panel...but my websites on the server were all working fine, which use mysql databases...so really strange So i tried to restart mysqld but got errors and can't restart and now all my websites are all offline now saying error connecting to database. logged in as root and tried /etc/init.d/mysqld start and got this error ERROR! Manager of pid-file quit without updating file What do i do next? What do i do? Please help!

  Read the article

• XPS M1730 Freezing & Crashing unexpectedly

  - by evesirim

  I have a Dell XPS M1730, freshly installed with Windows 7 Professional 32-bit that every so often crashes completely unexpectedly. It need not be running any applications at all for this to happen, never mind anything particularly intensive. It also clearly is not a BSoD issue as no Minidump files are being created in the process. All drivers are up to date and have been both rolled back and then updated and the Device Manager reports no issues. There are very few applications installed on the machine and it has only been online once. It runs a minimal boot of Win7 and yet still after all of this something is making it crash. All of this suggests to me it may be more like a hardware problem but to be honest I really have no idea - so I thought I'd try here. Any thoughts...? Many thanks in advance

  Read the article

• Launch script after SFTP disconnect

  - by Mates

  I'm currently using Caja (basically the same as Nautilus) to connect using SSH to my server and work with files. What I'm looking for is a way to launch a simple script when I disconnect - I can launch a script after disconnecting from the TTY by putting it into ~/.bash_logout file, but that is not executed when disconnecting from a file manager. The only idea I have is to set up a cronjob which would be checking for existing sftp-server or sshd processes periodicaly and launched the script when there's no such process running. Is there any easier way to do this?

  Read the article

• Solaris 11 installed, no updates?

  - by Paul De Niro

  I was messing around with solaris and decided to give Solaris 11 a try so I downloaded it from the Oracle website. After installing the OS, I went into the package manager and did an update. It told me that there were to available updates! I find this hard to believe considering that it's running a vulnerable version of firefox and java, its own in-house software product! Many of the other software products that came with the default install are also out of date and vulnerable. Is this normal for an Oracle install, or did I do something wrong with the upgrade process? I typed "pkg update" at the prompt, and I noticed that it did call out to pkg.oracle.com looking for updates. I find it bizarre that there are no updates available for an OS that was released a couple months ago with vulnerable software...

  Read the article

• Where do I find Nmake for Windows XP

  - by Shrujan

  Regarding BioPerl installation in Windows XP, I have installed Active Perl in Windows XP, and by using Perl Package Manager I have installed the BioPerl Repositories too. But I am not able to run the BioPerl yet. While running the BioPerl program in emacs it is showing the following error: make -k 'make' is not recognized as internal or external command, operable program or batch file I have tried to install Nmake for Windows but this error is showing. No webpage was found for the web address: http://download.microsoft.com/download/vc15/patch/1.52/w95/en-us/nmake15.exe How could this be resolved?

  Read the article

• Can't see CMD.EXE on Windows 7

  - by Andrea

  I have a problem with Windows 7 and cmd.exe with these conditions: Logon as non admin user Launch cmd.exe I can see cmd.exe in task manager but it's invisible in the desktop and I don't know what to do, everything is fine and I can see cmd.exe if I do login with an admin account. I can see it in the "Process" tab but not in the "Application" tab, and if I launch five cmd.exe's, I see five processes, but from that tab I have no "Bring to front" or "Maximise" I can't find any WOW folder under C:\Windows, even with show hidden and system files enabled. I'm running Windows 7 32-bit running on a 64-bit Intel Core 2 Duo E7500

  Read the article

• How do I copy files in Jolicloud from one drive to another

  - by Jason

  I'm running Jolicloud 1.2 from a USB stick. I clicked the "run but don't install option" at the start up menu and then i created an account. It says I am logged in as guest mode. How can I copy files from my original c:\ which is listed in the file manager to my usb stick. There's no button and drag and drop doesn't work is there a way to get into terminal? Is it perhaps restricted because I am a "guest"?

  Read the article

• Windows 7 - all usb devices go to sleep im idle mode

  - by dvdx

  A strange thing happened after a few updates to the system: Intel rapid storage SSD firmware update Intel Ethernet adapter update GPU Intel update When the computer turns off the screen (after 5 min), an unknown time later, all the USB devices stop working. Sound card Mouse Keybord etc. I can't turn them back on, so I can't wake up the screen or do anything except turn the computer off and back on. I checked my power save profile and all is OK there. I changed in the Device Manager, the Allow USB to sleep in all the hubs. How can I fix this??

  Read the article

• DIagnosing another Windows 7 Lockup

  - by MSEoris

  Im running windows 7 on a fairly modern machine (8gb ram, amd fx-6100, gtx 560ti) and I notice that periodically my windows seems to just hang for a little while. Frequently this occurs after a cold boot and i start up five or six small to medium sized programs, but also occasionally it occurs during normal usage. Basically what occurs is the screen locks up, there is no keyboard responsiveness for a period of 30 seconds to a full minute - after a bit of patience, control is returned, but I'm interested in figuring out what is causing such lockups. I checked the event log and dont see any issues, and all i can see in task manager is a spike in cpu and memory usage right after this occurs. Any tips on how to even begin to diagnose this? Thanks.

  Read the article

• Unknown device error installing Lexmark printer in Vista

  - by packotjimmy

  I have been using Lexmark X3650 All-In-One on my Windows Vista Desktop PC for a year without problem. Yesterday, I was prompted to plug in the USB from the printer and after that I got errors: "The USB device has malfunctioned." ,"The unknown device has been installed unsuccessfully.". Then, the printer just stoped responding. I have uninstalled the driver from Device Manager and software (using Lexmark's clean utility), rebooted, reinstalled, same thing, tried different ports/cable. Vista displays these two errors stated above immediately upon plug in. Please help me!

  Read the article

• How to troubleshoot port forwarding on Windows 7 (64 Bit) with ICS enabled?

  - by LearnCocos2D

  I want to forward some ports (1666 for perforce, 8081 for Hudson) on my Internet Gateway machine. This machine is running Windows 7 (64 Bit, legal, user-account) and connected to the Internet via cable modem (it's not a router). The Windows machine is sharing its Internet Connection via ICS and that works fine on all connected computers. I can access the services via the gateway's public IP (95.x.x.x) on the given ports if they are running on the gateway machine itself. I've added the ports and destination IP address (192.168.0.18) in the Internet network adapter's Advanced Settings dialog (Sharing tab). That's the same dialog where you have a list of preconfigured services like HTTP, FTP and other incoming services. When I do that I can't connect to the services anymore. For some reason port forwarding isn't working. I have uninstalled Bitdefender because I wanted to check if the Firewall interferes. I've also disabled the Windows Firewall and Defender to no avail. I tried a freeware tool that helps to setup port forwarding but that didn't work either. The target machine is a Mac OS X computer whose Firewall is disabled. The IP is static. I can successfully connect to the services using the local IP address (192.168.0.18) from two different machines, including the gateway computer. So internally and externally it seems to me that the ports are open and not blocked, and the issue is with port forwarding itself. From what I understand it should be enough to add an entry to the Advanced Settings dialog to enable port forwarding when there are no firewalls interfering. How can I troubleshoot why port forwarding isn't working for me? What steps should I follow to alleviate the issue? PS: I gladly accept command line solutions. Other things I've tried: adding an Inbound Rule to Windows Firewall for the 1666, 8081 ports trying with Windows Firewall enabled and disabled disabling/enabling the network adapter double-checked that the IP addresses are correct mapping a different incoming port to the service's actual port followed or checked the misc tips in this article What I haven't dared trying yet (let me know if it's worth a shot): disable/enable ICS remove all network adapters (via Control Panel), then re-install and re-configure them

  Read the article

• USB drivers stopped working in Windows 8

  - by Maxim V. Pavlov

  I have installed an MSDN version of Windows 8 Professional (x64) RTM. For about 3 restarts everything worked well. But once I've rebooted again - USB drivers (all of them, inluding the USB 3 drivers) stopped working. Device Manager properties said that the USB driver is not compatible with the system. Gigabyte doesn't list Windows 8 drivers for my MB X58A-UD3R. Tried to reinstall windows 7 USB drivers - system said the current driver is fine and didn't want to reinstall. Is this the common Windows 8 problem? How can solve it or debug it even more?

  Read the article

• How can I make my laptop use a phone as a wi-fi adapter?

  - by Dennis Williamson

  I have an HP Pavilion dv6400 series laptop with an NVidea chipset which is the subject of a class action lawsuit. The symptom (PDF) that I'm experiencing is that the system fails to recognize that there is a wireless adapter installed. It doesn't appear in Device Manager. In this question, I ask if there's a way to work around this problem. As an alternative, I'd like to see if there's a way to use an old Windows Mobile 5 phone that does not have cellular service (voice or data) as a Wi-Fi adapter. How can this be accomplished? The system is running Windows Vista Home and has the latest BIOS (F42) and Windows updates and drivers.

  Read the article

• Registry Search & Replace Tool

  - by RHPT

  Can anyone recommend a good (and ideally free) Registry Search & Replace tool? There seems to be a lot of utilities that searches the registry, but not very many that does the replacing. I've found some really old ones (from the late 90s to 2007). I was hoping for newer ones or ones still maintained. I did run across RegReplacer, but that one doesn't seem to work very well (It only found 2 instances of a string where NirSoft's RegScanner caught 449). I also found Registrar Registry Manager via this question here, but it's $44 :-\

  Read the article

• How to remove AegisP.sys

  - by NinjaCat

  When I boot my laptop, I get the following event in the error log... I cannot tell which service is trying to use the aegisp.sys file or generating this event. Can anyone shed some light? Google is not very helpful with this issue ;) Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7000 Date: 8/20/2010 Time: 10:50:03 PM User: N/A Computer: XXX Description: The AEGIS Protocol (IEEE 802.1x) v3.6.0.0 service failed to start due to the following error: The system cannot find the file specified. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Make emacs aware of files externally moved/renamed on Mac os x

  - by Gyom

  I've been using mac os x for several years, and I realize that I've now gotten used to all applications transparently "following" files as I rename or move them (either via mv on the console or within the Finder's GUI), and emacs is pretty much the only program that does not. This is a shame though, because most of my time in front a screen is actually spent in front of emacs :-) Would anyone have any ideas or pointers about what measures I could take to get that behaviour in emacs ? (yes I know this is "impossible" to acheive in general, but when I just rename a simple file, or move it to a directory nearby, it's a shame I have to close/reopen it for emacs to notice. oh and no, I'm not going to use 'dired' as a file manager :-)

  Read the article

• Hyper-v dynamic memory client machines always use maximum memory

  - by Eric P

  When I create a virtual machine in Hyper-V and set it up to use dynamic memory, the virtual machine will always use the maximum memory within the virtualized OS. Hyper-V will show the assigned memory at 514mb, but when I log into the server and pull up task manager, it will show 90% memory used. When I bump the maximum memory up to 4gb, I get the same result: 90% memory usage. Nothing is even running on the virtual machine other than a clean instal of Windows Server 2008 R2. I have also tried it with Windows 7 with the same results. Is this the expected behavior or is something setup wrong

  Read the article

• Xorg fails to start under Ubuntu

  - by den-javamaniac

  I'm running desktop Ubuntu 9.10 on my Dell laptop. Previously it was Ubuntu 9.04. After some period of time (lets say 3-4 months) my X fails to start automatically after some restart calls. If that takes place my network manager applet doesn't start either (after I do startx). Can any one point out what I'm missing/what's the problem? EDDITED I get a perfect server boot meaning there's no Xorg started. Command line interface is all I get starting from login and further.

  Read the article

• Xorg fails to start under Ubuntu

  - by den-javamaniac

  I'm running desktop Ubuntu 9.10 on my Dell laptop. Previously it was Ubuntu 9.04. After some period of time (lets say 3-4 months) my X fails to start automatically after some restart calls. If that takes place my network manager applet doesn't start either (after I do startx). Can any one point out what I'm missing/what's the problem? EDDITED I get a perfect server boot meaning there's no Xorg started. Command line interface is all I get starting from login and further.

  Read the article

• How should oracle vbox look like in terms of Memory, CPU and Performance? [duplicate]

  - by Nicholas DiPiazza

  This question already has an answer here: Can you help me with my capacity planning? 2 answers I've got a need for a ton of VMs to simulate some realistic load testing scenarios. I've got a bunch of different host machines that differ in ram, cpu's, etc. What should my resource manager look like? Is there a standard way to know what the CPU, Memory and Disk Utilization should be given your CPUs + Memory available + Disks available? For example, I have a box: MemTotal: 50 Gb CPUs: 8 CPUs are pretty much 100% all day long. Memory is at about 60%. Swap not getting hit. Little bewildered by why the VMs, while doing the exact same test script, are showing different virtual memory consumption. Huh.

  Read the article

• Start TLS and 389 Directory

  - by Kyle Flavin

  I'm trying to configure Start TLS on 389 Directory server, but I'm having all sorts of issues. I've been following this doc: https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Directory_Server/9.0/html/Administration_Guide/managing-certs.html which specifies that I should create a certificate for both the directory server and admin server. I've imported the CA cert on both servers. I've tried to use the same server certificate for both. It will not allow me to do so. However, the admin and directory servers reside on the same host. If I generate a new certificate it will need to use the same hostname. I'm not sure if that's valid... Has anyone out there set this up before? Any direction would be helpful. I have multmaster replication set up. From an external client, I'm attempting to do an ldapsearch -ZZ -x -h "myhost" -b "dc=example,dc=com" -D "cn=Directory Manager" -W "", and I'm getting a protocol error.

  Read the article

< Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >