Search Results

Search found 45469 results on 1819 pages for 'open source contributions'.

Page 281/1819 | < Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >

• Problem opening password encrypted .docx file on Word 2003

  - by molecule

  Hi all, I am having a problem opening a .docx file on my Word 2003. I have installed the Compatibility pack for 2007 but when i try to open this particular file, I receive the error "Word experienced an error trying to open the file. Try these suggestions. 1. Check the file permissions for the document, 2. Make sure there is sufficient free memory and disk space, 3. Open the file with the Text Recovery converter. I do not think it is any of the errors as I am able to open it on a different PC with Word 2003 as well. I also do not have any issues opening any non-password encrypted .docx files. Has anyone experienced the same issue? Most posts on the internet relate to "open and repair" but as mentioned, I am able to open this file on another PC without any problems. Any advice is greatly appreciated. Thanks, George

  Read the article

• rpmbuild gives seg fault

  - by Deepti Jain

  I am trying to build an rpm using the rpmbuild tool. I have source code which build binaries around 30 GB. This software for which I am making the rpm has dozens of executables. When I copy only the binaries of a single executable (Eg. init) my rpm builds successfully. But when I dump the entire build to the rpm, rpmbuild does everything but gives a seg fault in the end. Here is my spec file: # This is a sample spec file for wget %define _topdir /root/mywget %define name source %define release 1 %define version 1.12 %define _builddir /root/mywget/BUILD/glenlivet %define _buildrootdir /root/mywget/BUILDROOT %define _buildroot /root/mywget/BUILDROOT %define _sourcedir /root/mywget/SOURCES BuildRoot: %{_buildroot} Summary: GNU source License: GPL Name: %{name} Version: %{version} Release: %{release} Source: %{name}-%{version}.tar.gz Prefix: /usr Group: Development/Tools %description The GNU sample program downloads files from the Internet using the command-line. %prep %setup -q -n glenlivet %build cd %{_builddir} make all %install rm -rf %{_buildrootdir} mkdir -p %{_buildrootdir}/bin cp -p -r %{_builddir}/build/obj-x64/* %{_buildrootdir}/bin/ %files %defattr(-,root,root) /bin/* If I only copy some of the binaries (let say one utility and its dependent binaries) it works fine. But when I try to copy the entire build, I get a seg fault. I get the seg fault after rpmbuild has executed these sections: %prep %build %install rpmbuild also processes my source file. Processing files: source-1.12-1 Finding Provides: Finding Requires: Finding Supplements: Provides:...... Requires:...... Checking for unpackaged file(s):/ usr/lib/rpm/check-files /root/mywget/BUILDROOT Checking for unpackaged file(s):/ usr/lib/rpm/check-files /root/mywget/BUILDROOT Segmentation fault Any clue what wrong is going on or where does rpmbuild fails? Thanks in advance

  Read the article

• Error starting modern compiler

  - by saloni

  In my servlet , I m using Tomcat 5.0 and JRE is 1.5.0 but it is giving error when I click on the URL . As when I created a war file of my project and deployed in tomcat than it is working fine . It means that only problem with my eclipse configuration ERROR IS : - Apr 5, 2010 3:20:22 PM org.apache.jasper.compiler.Compiler generateClass SEVERE: Javac exception Error starting modern compiler at org.apache.tools.ant.taskdefs.compilers.Javac13.execute(Javac13.java:69) at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:942) at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:764) at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:382) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:472) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:451) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:439) at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705) at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683) at java.lang.Thread.run(Unknown Source) Caused by: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.apache.tools.ant.taskdefs.compilers.Javac13.execute(Javac13.java:61) ... 35 more Caused by: java.lang.VerifyError: class com.sun.tools.javac.jvm.Target overrides final method . at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(Unknown Source) at java.security.SecureClassLoader.defineClass(Unknown Source) at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1634) at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:860) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1307) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1189) at java.lang.ClassLoader.loadClassInternal(Unknown Source) at com.sun.tools.javac.Main.compile(Main.java:42) ... 40 more --- Nested Exception --- java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.apache.tools.ant.taskdefs.compilers.Javac13.execute(Javac13.java:61) at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:942) at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:764) at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:382) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:472) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:451) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:439) at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705) at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683) at java.lang.Thread.run(Unknown Source) Caused by: java.lang.VerifyError: class com.sun.tools.javac.jvm.Target overrides final method . at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(Unknown Source) at java.security.SecureClassLoader.defineClass(Unknown Source) at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1634) at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:860) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1307) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1189) at java.lang.ClassLoader.loadClassInternal(Unknown Source) at com.sun.tools.javac.Main.compile(Main.java:42) ... 40 more Apr 5, 2010 3:20:22 PM org.apache.jasper.compiler.Compiler generateClass SEVERE: Env: Compile: javaFileName=/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/work/Catalina/localhost/SampleSaloni//org/apache/jsp/page\form_jsp.java classpath=/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/classes/;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/ant-launcher.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/ant.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-collections-3.1.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-dbcp-1.2.1.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-el.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-pool-1.2.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/jasper-compiler.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/jasper-runtime.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/jsp-api.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-common.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-factory.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-java.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-resources.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/tools.jar;D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\work\Catalina\localhost\SampleSaloni;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/classes/;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/ant-launcher.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/ant.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-collections-3.1.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-dbcp-1.2.1.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-el.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-pool-1.2.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/jasper-compiler.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/jasper-runtime.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/jsp-api.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-common.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-factory.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-java.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-resources.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/tools.jar;D:/software setups/jakarta-tomcat-5.0.28/common/classes/;D:/software setups/jakarta-tomcat-5.0.28/common/lib/ant-launcher.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/ant.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/commons-collections-3.1.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/commons-dbcp-1.2.1.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/commons-el.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/commons-pool-1.2.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/jasper-compiler.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/jasper-runtime.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/jsp-api.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/naming-common.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/naming-factory.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/naming-java.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/naming-resources.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/servlet-api.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/tools.jar;/D:/software%20setups/jakarta-tomcat-5.0.28/bin/bootstrap.jar;/C:/Program%20Files/Java/jre1.5.0_09/lib/ext/dnsns.jar;/C:/Program%20Files/Java/jre1.5.0_09/lib/ext/sunjce_provider.jar;/C:/Program%20Files/Java/jre1.5.0_09/lib/ext/sunpkcs11.jar cp=D:\software setups\jakarta-tomcat-5.0.28\bin\bootstrap.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\classes cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\ant-launcher.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\ant.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-collections-3.1.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-dbcp-1.2.1.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-el.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-pool-1.2.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\jasper-compiler.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\jasper-runtime.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\jsp-api.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-common.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-factory.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-java.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-resources.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\tools.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\work\Catalina\localhost\SampleSaloni cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\classes cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\ant-launcher.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\ant.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-collections-3.1.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-dbcp-1.2.1.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-el.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-pool-1.2.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\jasper-compiler.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\jasper-runtime.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\jsp-api.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-common.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-factory.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-java.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-resources.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\tools.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\classes cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\ant-launcher.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\ant.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\commons-collections-3.1.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\commons-dbcp-1.2.1.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\commons-el.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\commons-pool-1.2.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\jasper-compiler.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\jasper-runtime.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\jsp-api.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\naming-common.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\naming-factory.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\naming-java.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\naming-resources.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\servlet-api.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\tools.jar cp=D:\software%20setups\jakarta-tomcat-5.0.28\bin\bootstrap.jar cp=C:\Program%20Files\Java\jre1.5.0_09\lib\ext\dnsns.jar cp=C:\Program%20Files\Java\jre1.5.0_09\lib\ext\sunjce_provider.jar cp=C:\Program%20Files\Java\jre1.5.0_09\lib\ext\sunpkcs11.jar work dir=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\work\Catalina\localhost\SampleSaloni extension dir=C:\Program Files\Java\jre1.5.0_09\lib\ext srcDir=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\work\Catalina\localhost\SampleSaloni include=org/apache/jsp/page/form_jsp.java Apr 5, 2010 3:20:22 PM org.apache.jasper.compiler.Compiler generateClass SEVERE: Error compiling file: /D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/work/Catalina/localhost/SampleSaloni//org/apache/jsp/page\form_jsp.java [javac] Compiling 1 source file

  Read the article

• Desktop icons disappears when Nautilus is launched, until next boot

  - by Santosh

  What happens: When I log in into my Ubuntu everything is normal, I have some icons on my desktop and I can see them at this point of time. As soon as I click on the explorer (nautilus) on the Launcher bar, everything goes (disappers) and never comes. No matter how many time you click on the launcher, you can't open nautilus. I tried opening nautilus from the terminal, get the following: santosh@santosh:~$ nautilus Initializing nautilus-gdu extension ** (nautilus:2158): DEBUG: SyncDaemon already running, initializing SyncdaemonDaemon object Initializing nautilus-open-terminal extension (nautilus:2158): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed (nautilus:2158): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed Segmentation fault I suspect on "Segmentation fault" on the last line, whats that? I was amazed when I run this command in sudo.: santosh@santosh:~$ sudo nautilus Initializing nautilus-gdu extension ** (nautilus:2216): DEBUG: Syncdaemon not running, waiting for it to start in NameOwnerChanged Initializing nautilus-open-terminal extension (nautilus:2216): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed (nautilus:2216): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed Nautilus-Share-Message: Called "net usershare info" but it failed: 'net usershare' returned error 255: net usershare: cannot open usershare directory /var/lib/samba/usershares. Error No such file or directory Please ask your system administrator to enable user sharing. As soon as I type sudo nautilus and hit enter, nautilus starts and the desktop background changes (to the default which ubuntu has). Don't know why but at this point as soon as I click on Desktop (from the left pane) then nautilus closes. Did anyone has same issue? I am corrently working with commandline to do my work and its a big pain. Additional Information: Another thing I have noticed that when I want to open the location of PDF file I am reading in document viewer (by clicking the folder icon). It gives error "Could not open the containing folder" and "Failed to execute child process "nautilus" (Permission denied)". Any idea?                

  Read the article

• Android SDK having trouble with ADB

  - by MowDownJoe

  So, I installed the Android SDK, Eclipse, and the ADT. Upon firing up Eclipse the first time after setting up the ADT, this error popped up: [2012-05-29 12:11:06 - adb] /home/drsmith/Downloads/android-sdk-linux/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-05-29 12:11:06 - adb] 'adb version' failed! /home/drsmith/Downloads/android-sdk-linux/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-05-29 12:11:06 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/drsmith/Downloads/android-sdk-linux/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-05-29 12:11:06 - adb] /home/drsmith/Downloads/android-sdk-linux/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-05-29 12:11:06 - adb] 'adb version' failed! /home/drsmith/Downloads/android-sdk-linux/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-05-29 12:11:06 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/drsmith/Downloads/android-sdk-linux/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory I'm not quite sure how this is. Feels weird that there's a missing library there. I'm using Ubuntu 12.04. No adb is a pretty big blow as an Android developer. How do I fix?

  Read the article

• Cannot FTP without simultaneous SSH connection?

  - by Lucas

  I'm trying to set up an old box as a backup server (running 10.04.4 LTS). I intend to use 3rd party software on my PC to periodically connect to my server via FTP(S) and to mirror certain files. For some reason, all FTP connection attempts fail UNLESS I'm simultaneously connected via SSH. For example, if I use putty to test the connection to port 21, the system hangs and times out. I get: 220 Connected to LeServer USER lucas 331 Please specify the password. PASS [password] <cursor> However, when I'm simultaneously logged in (in another session) everything works: 220 Connected to LeServer USER lucas 331 Please specify the password. PASS [password] 230 Login successful. Basically, this means that my software will never be able to connect on its own, as intended. I know that the correct port is open because it works (sometimes) and nmap gives me: Starting Nmap 5.00 ( http://nmap.org ) at 2012-03-20 16:15 CDT Interesting ports on xx.xxx.xx.x: Not shown: 995 closed ports PORT STATE SERVICE 21/tcp open ftp 22/tcp open ssh 53/tcp open domain 139/tcp open netbios-ssn 445/tcp open microsoft-ds Nmap done: 1 IP address (1 host up) scanned in 0.15 seconds My only hypothesis is that this has something to do with iptables. Maybe it's allowing only established connections? I don't think that's how I set it up, but maybe? Here's my iptables rules for INPUT: lucas@rearden:~$ sudo iptables -L INPUT Chain INPUT (policy DROP) target prot opt source destination fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh ufw-before-logging-input all -- anywhere anywhere ufw-before-input all -- anywhere anywhere ufw-after-input all -- anywhere anywhere ufw-after-logging-input all -- anywhere anywhere ufw-reject-input all -- anywhere anywhere ufw-track-input all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:ftp I'm using vsftpd. Any thoughts/resources on how I could fix this? L

  Read the article

• Looking for some OO design advice

  - by Andrew Stephens

  I'm developing an app that will be used to open and close valves in an industrial environment, and was thinking of something simple like this:- public static void ValveController { public static void OpenValve(string valveName) { // Implementation to open the valve } public static void CloseValve(string valveName) { // Implementation to close the valve } } (The implementation would write a few bytes of data to the serial port to control the valve - an "address" derived from the valve name, and either a "1" or "0" to open or close the valve). Another dev asked whether we should instead create a separate class for each physical valve, of which there are dozens. I agree it would be nicer to write code like PlasmaValve.Open() rather than ValveController.OpenValve("plasma"), but is this overkill? Also, I was wondering how best to tackle the design with a couple of hypothetical future requirements in mind:- We are asked to support a new type of valve requiring different values to open and close it (not 0 and 1). We are asked to support a valve that can be set to any position from 0-100, rather than simply "open" or "closed". Normally I would use inheritance for this kind of thing, but I've recently started to get my head around "composition over inheritance" and wonder if there is a slicker solution to be had using composition?

  Read the article

• can anyone help me through the preparation of Eclipse IDE for android developer in ubuntu 12.04?

  - by csbl

  I'm new to to Linux, in this particular case, to Ubuntu. I have a small android project I have to finnish until this Friday and I'm still stuck with the install and preparing of the development envrironment. The only thing I did was install the Eclipse IDE. I'm still missing the SDK, JAVA and anything else that might be needed. Can someone help me through this? It's only because I'm running out of time to develop, or else I would embarc on a deeper investigation of this OS. I tried the step to install android platforms, through Eclispe-Help-Install New Software, and I got the follwoing error messages, at the end of the process: [2012-06-06 17:35:56 - adb] /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] 'adb version' failed! /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] 'adb version' failed! /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory Can anyone help, please??

  Read the article

• Getting MTP to work with a Galaxy tab 2 7.0?

  - by Wouter

  I'm trying to get MTP with the galaxy tab 2 7.0 working on my ubuntu installation. Such that I can access the files. I tried to do what is described here: http://www.omgubuntu.co.uk/2011/12/how-to-connect-your-android-ice-cream-sandwich-phone-to-ubuntu-for-file-access I however fail at executing one of the following commands mtp-detect | grep idVendor mtp-detect | grep idProduct This fails [20:42|0] $ mtp-detect | grep idVender Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 [20:44|0] $ mtp-detect | grep idProduct Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 Now my guess was was that the idVender is the same as the VID (04e8) and the idProduct is the same as PID (6860) Now I continued to work with those values and completed the tutorial. When finished I tried android-connect This returned fuse: bad mount point `/media/GalaxyTab': Transport endpoint is not connected Does anybody have a clue what to do? Also I want to note that when I connect my GalaxyTab 2 7.0 that I still get a pop-up of ubuntu that a device was connected. I also can still see the mapstructure, the problem however is is that all the folders have 0 bytes and do not have any subfolders. I can only see the folders in the root. ps. I also checked a similar question and tried what is described in this answer http://askubuntu.com/a/88630/27480

  Read the article

• Unable to start VMWare Workstation after upgrade to 13.04

  - by pst007x

  After upgrading to 13.04 I am unable to start VMWorkstation. I get the following message: Before you can run VMware, several modules must be compiled and loaded into the running kernel. Kernel Headers 3.8.0-19-generic Kernel headers for version 3.8.0-19-generic were not found. If you have installed them in a non-default path you can specify the path below. Does anyone have any idea what to do next? Ubuntu 13.04 64bit If I direct the path to: /usr/src/linux-headers-3.8.0-19-generic I get the following message: C header files matching your running kernel were not found. Thanks Additional: As suggested I run this in terminal: cd /lib/modules/$(uname -r)/build/include/linux sudo ln -s ../generated/utsrelease.h sudo ln -s ../generated/autoconf.h sudo ln -s ../generated/uapi/linux/version.h However, now I get the following: Before you can run VMware, several modules must be compiled and loaded into the kernel CANCEL / INSTALL I INSTALL, the window closes and nothing happens.... Any ideas? ADDITIONAL: I installed this: sudo apt-get install open-vm-tools open-vm-tools-dev open-vm-dkms open-vm-toolbox open-vm-tools-dev And it all launched... Many thanks for the suggestions and help... This is what I love about Ubuntu... it has a great helpful community... ! Note: Also found this which may help others too: HERE ADDITIONAL ERROR: Could not open /dev/vmmon: Is a directory. Please make sure that the kernel module `vmmon' is loaded. Failed to initialize monitor device. Monitor settings all greyed out RESOLUTION: Re-installation of Nvidia Drivers

  Read the article

• Launching LibreOffice Files - Unusual Window Behaviour

  - by Mike

  Ubuntu 11.10 Unity. If I launch LibreOffice Files (ODS, ODT, ODP) with a double click in their home folders they launch with the appropriate application (Calc, Writer, Impress) however the application windows do not display the usual Close, Minimize, Restore buttons in the left hand corner. There is just a blank space where they should be. In the Unity launcher on the left there is not the expected white arrow next to the launcher icon and the open app is not seen by the ALT+TAB keystroke when you have multiple windows open. For example: if you have an app open in this way and say Firefox, if you minimize Firefox you are only left with the desktop and you have no way to locate the open LibreOffice app. Clicking the app's icon in the launcher simply opens another instance. A messy workaround is to click [Firefox] to a restored window and the LibreOffice app can be seen behind it allowing a mouse click to bring it forward. If I open the LibreOffice app from the launcher and then Open a file from its menu, it all behaves as expected. I don't find this as convenient; anyone know how to fix the bad behaviour?

  Read the article

• How do I automatically start Clamz with AMZ files for Amazon MP3 downloads?

  - by Takkat

  Chromium can open downloaded files with the default application (e.g. PDF in Evince). In my setup a downloaded .AMZ (for Amazon MP3) always opened with Gedit. However I would like to have all downloaded .amz files to autromatically open with Clamz, a command line tool for downloading that works like a charm. As in Nautilus my .amz files were associated to open with Gedit too I thought it was a good idea to add a clamz.desktop file in ~/.local/share/applications (according to this answer) [Desktop Entry] Encoding=UTF-8 Name=Clamz Comment=Open AMZ files for Amazon MP3 download Exec=/usr/bin/clamz %u Terminal=True Type=Application Icon= Categories=Application; StartupNotify=true MimeType=audio/x-amzxml; NoDisplay=true This lets me choose Clamz as default application in Nautilus. But when opening an .amz file in Nautilus it still does not open with Clamz as expected but is treated as an executable text file instead (note that the executable bit is not set!). Is there any other way to make Chromium or Nautilus always open an .amz file with Clamz? Did I miss to change setting in another place?

  Read the article

• Linux router: ping doesn't route back

  - by El Barto

  I have a Debian box which I'm trying to set up as a router and an Ubuntu box which I'm using as a client. My problem is that when the Ubuntu client tries to ping a server on the Internet, all the packets are lost (though, as you can see below, they seem to go to the server and back without problem). I'm doing this in the Ubuntu Box: # ping -I eth1 my.remote-server.com PING my.remote-server.com (X.X.X.X) from 10.1.1.12 eth1: 56(84) bytes of data. ^C --- my.remote-server.com ping statistics --- 13 packets transmitted, 0 received, 100% packet loss, time 12094ms (I changed the name and IP of the remote server for privacy). From the Debian Router I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 7, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 8, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 8, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 9, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 9, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 10, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 10, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 11, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 11, length 64 ^C 9 packets captured 9 packets received by filter 0 packets dropped by kernel # tcpdump -i eth2 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth2, link-type EN10MB (Ethernet), capture size 65535 bytes IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 213, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 213, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 214, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 214, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 215, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 215, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 216, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 216, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 217, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 217, length 64 ^C 10 packets captured 10 packets received by filter 0 packets dropped by kernel And at the remote server I see this: # tcpdump -i eth0 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 1, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 1, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 2, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 2, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 3, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 3, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 4, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 4, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 5, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 5, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 6, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 6, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 7, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 7, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 8, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 8, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 9, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 9, length 64 18 packets captured 228 packets received by filter 92 packets dropped by kernel Here "X.X.X.X" is my remote server's IP and "Y.Y.Y.Y" is my local network's public IP. So, what I understand is that the ping packets are coming out of the Ubuntu box (10.1.1.12), to the router (10.1.1.1), from there to the next router (192.168.1.1) and reaching the remote server (X.X.X.X). Then they come back all the way to the Debian router, but they never reach the Ubuntu box back. What am I missing? Here's the Debian router setup: # ifconfig eth1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:d98/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:105761 errors:0 dropped:0 overruns:0 frame:0 TX packets:48944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:40298768 (38.4 MiB) TX bytes:44831595 (42.7 MiB) Interrupt:19 Base address:0x6000 eth2 Link encap:Ethernet HWaddr 6c:f0:49:a4:47:38 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fea4:4738/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:38335992 errors:0 dropped:0 overruns:0 frame:0 TX packets:37097705 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:4260680226 (3.9 GiB) TX bytes:3759806551 (3.5 GiB) Interrupt:27 eth3 Link encap:Ethernet HWaddr 94:0c:6d:82:c8:72 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:20 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3408 errors:0 dropped:0 overruns:0 frame:0 TX packets:3408 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:358445 (350.0 KiB) TX bytes:358445 (350.0 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:2767779 errors:0 dropped:0 overruns:0 frame:0 TX packets:1569477 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3609469393 (3.3 GiB) TX bytes:96113978 (91.6 MiB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth2 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth2 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Ubuntu box (on 10.1.1.12 and 192.168.1.12) Address HWtype HWaddress Flags Mask Iface 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.102 ether NN:NN:NN:NN:NN:NN C eth2 10.1.1.12 ether 00:1e:67:15:2b:f0 C eth1 192.168.1.86 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.2 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.40 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.12 ether 00:1e:67:15:2b:f1 C eth2 192.168.1.77 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.41 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.123 ether NN:NN:NN:NN:NN:NN C eth2 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 10.1.1.0/24 !10.1.1.0/24 MASQUERADE all -- !10.1.1.0/24 10.1.1.0/24 Chain OUTPUT (policy ACCEPT) target prot opt source destination And here's the Ubuntu box: # ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f1 inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28785139 errors:0 dropped:0 overruns:0 frame:0 TX packets:19050735 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32068182803 (32.0 GB) TX bytes:6061333280 (6.0 GB) Interrupt:16 Memory:b1a00000-b1a20000 eth1 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f0 inet addr:10.1.1.12 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:285086 errors:0 dropped:0 overruns:0 frame:0 TX packets:12719 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30817249 (30.8 MB) TX bytes:2153228 (2.1 MB) Interrupt:16 Memory:b1900000-b1920000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:86048 errors:0 dropped:0 overruns:0 frame:0 TX packets:86048 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11426538 (11.4 MB) TX bytes:11426538 (11.4 MB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.1.1.1 0.0.0.0 UG 100 0 0 eth1 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.8.0.0 192.168.1.10 255.255.255.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Debian box (on 10.1.1.1 and 192.168.1.10) Address HWtype HWaddress Flags Mask Iface 192.168.1.70 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.97 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.103 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.13 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.120 (incomplete) eth0 192.168.1.111 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.51 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.102 (incomplete) eth0 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.74 (incomplete) eth0 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.121 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.71 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.88 (incomplete) eth0 192.168.1.82 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.98 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.73 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.11 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.85 (incomplete) eth0 192.168.1.112 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.81 ether NN:NN:NN:NN:NN:NN C eth0 10.1.1.1 ether 94:0c:6d:82:0d:98 C eth1 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.10 ether 6c:f0:49:a4:47:38 C eth0 192.168.1.86 (incomplete) eth0 192.168.1.119 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth1 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth0 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination Edit: Following Patrick's suggestion, I did a tcpdump con the Ubuntu box and I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 1, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 1, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 2, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 2, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 3, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 3, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 4, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 4, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 5, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 5, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 6, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 6, length 64 ^C 12 packets captured 12 packets received by filter 0 packets dropped by kernel So the question is: if all packets seem to be coming and going, why does ping report 100% packet loss?

  Read the article

• Hyper-V Ubuntu Networking Problems Copying Large Amounts of Data

  - by Anonymous

  I am trying to copy a large amount (about 50 GB) of data over my network from a Hyper-V-hosted virtual machine running Ubuntu 11.04 (Natty Narwhal) to another (non-virtual) Ubuntu host that I plan to use for testing upgrades to one of our web applications. The problem I am having is with the virtual machine, which I shall refer to in what follows as "source.host". This machine is running 64-bit Ubuntu Server with the 2.6.38-8-server kernel and the Microsoft Linux Integration Components for Hyper-V kernel modules (hv_utils, hv_timesource, hv_netvsc, hv_blkvsc, hv_storvsc, and hv_vmbus) loaded. It uses a Hyper-V "synthetic network adapter" for its networking interface. To do the copy, I log on to the machine with the data and run the following commands (Call the remote machine "destination.host".): $ cd /path/to/data $ tar -cvf - datafolder/ | ssh [email protected] "cat > ~/data.tar" This runs for a while and then suddenly stops after transferring somewhere from 2-6 GB. The terminal on the source.host machine displays a Write failed: broken pipe error. The odd part is this: after this occurs, the "source.host" machine is no longer able to talk to the rest of the network. I cannot ping any other hosts on the network from the "source.host" machine, and I cannot ping the "source.host" machine from any other host on the network. I am equally unable to access the any of the web services hosted on "source.host". Running ifconfig on "source.host" shows the network adapter to be up and running as usual with the correct IP address and everything. I tried restarting the networking service with $ /etc/init.d/networking restart but the problem does not go away. Restarting the machine makes it capable of talking to the network again -- it can ping and be pinged by other hosts, and the web services are also accessible and usable as normal -- but attempting the copy operation again results in the same failure, requiring another restart. As an experiment, I tried replacing the tar -- ssh pipeline above with a straight scp: $ scp -r datafolder/ [email protected]:~ but to no avail Thinking that the issue might have to do with the kernel packet-send buffers filling up, I tried increasing the buffer size to 12 MB (up from the 128 KB default) with # echo 12582911 > /proc/sys/net/core/wmem_max but this also had no effect. I'm guessing at this point that it might be a problem with the Microsoft synthetic network driver, but I don't really know. Does anyone have any suggestions? Thank you very much in advance!

  Read the article

• AutoMapper recursive

  - by fra

  Hi! I would like to make a deep copy of a complex object tree using AutoMapper. The problem is that for each member I would like to construct a new object and then map it, and not simply copying the existing one. Here it is an example: public abstract class Test { public Test() { this.Id = Guid.NewGuid(); } public Guid Id { get; private set; } } public class OuterTest : Test { public InnerTest Inner { get; set; } } public class InnerTest : Test { public int Value { get; set; } } and how to test it: OuterTest outerDest = Mapper.Map<OuterTest, OuterTest>(outerSource); System.Diagnostics.Debug.WriteLine("InnerSource id: " + innerSource.Id); System.Diagnostics.Debug.WriteLine("InnerSource value: " + innerSource.Value); System.Diagnostics.Debug.WriteLine("OuterSource id: " + outerSource.Id); System.Diagnostics.Debug.WriteLine("OuterDest id: " + outerDest.Id); System.Diagnostics.Debug.WriteLine("OuterDest.Inner id: " + outerDest.Inner.Id); System.Diagnostics.Debug.WriteLine("OuterDest.Inner value: " + outerDest.Inner.Value); This is the result from the output window: InnerSource id: a60fda37-206a-40a8-a7f8-db480149c906 InnerSource value: 2119686684 OuterSource id: 7486899e-2da8-4873-9160-d6096b555c73 OuterDest id: 7486899e-2da8-4873-9160-d6096b555c73 OuterDest.Inner id: a60fda37-206a-40a8-a7f8-db480149c906 OuterDest.Inner value: 2119686684 The problem is thet the object innerSource is always the same instance as outerDest.Inner (I verified through MakeObjectId of VS debugger) but I would like them to be two different instances. How could I create a recursive map with this behavior? I tried creating a custom IValueResolver like the following, without success. public class AutoMapperNewObjectResolver : IValueResolver { public ResolutionResult Resolve(ResolutionResult source) { object resolved; if (source.Value != null) { object instance = Activator.CreateInstance(source.MemberType); resolved = Mapper.Map(source.Value, instance, source.MemberType, source.MemberType); } else { resolved = null; } ResolutionResult result = source.New(resolved, source.Context.DestinationType); return result; } } and configured like this: Mapper.CreateMap<OuterTest, OuterTest>() .ForMember(d => d.Inner, o => o.ResolveUsing<AutoMapperNewObjectResolver>().FromMember(src => src.Inner)); Any help appreciated, thank you

  Read the article

• BouncyCastle GCM/CCM Exceprion in JAVA

  - by 4r1y4n

  can anyone give me an example for using GCM and/or CCM modes with AES in BouncyCastle? My code is this: SecretKeySpec key = new SecretKeySpec(keyBytes, "AES"); IvParameterSpec ivSpec = new IvParameterSpec(ivBytes); Cipher cipher = Cipher.getInstance("AES/AEAD/PKCS5Padding", "BC"); byte[] block = new byte[1048576]; int i; long st,et; cipher.init(Cipher.ENCRYPT_MODE, key, ivSpec); BufferedInputStream bIn=new BufferedInputStream(new ProgressMonitorInputStream(null,"Encrypting ...",new FileInputStream("input"))); CipherInputStream cIn = new CipherInputStream(bIn, cipher); BufferedOutputStream bOut=new BufferedOutputStream(new FileOutputStream("output.enc")); int ch; while ((i = cIn.read(block)) != -1) { bOut.write(block, 0, i); } cIn.close(); bOut.close(); Thread.sleep(5000); cipher.init(Cipher.DECRYPT_MODE, key, ivSpec); BufferedInputStream fis=new BufferedInputStream(new ProgressMonitorInputStream(null,"Decrypting ...",new FileInputStream("output.enc"))); //FileInputStream fis=new FileInputStream("output.enc"); //FileOutputStream ro=new FileOutputStream("regen.plain"); BufferedOutputStream ro=new BufferedOutputStream(new FileOutputStream("regen.plain")); CipherInputStream dcIn = new CipherInputStream(fis, cipher); while ((i = dcIn.read(block)) != -1) { ro.write(block, 0, i); } dcIn.close(); ro.close(); but it throws this exception when decrypting in GCM mode (line 70 is bOut.write(block, 0, i);): Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException at java.lang.System.arraycopy(Native Method) at org.bouncycastle.crypto.modes.CCMBlockCipher.processPacket(Unknown Source) at org.bouncycastle.crypto.modes.CCMBlockCipher.doFinal(Unknown Source) at org.bouncycastle.jcajce.provider.symmetric.util.BaseBlockCipher$AEADGenericBlockCipher.doFinal(Unknown Source) at org.bouncycastle.jcajce.provider.symmetric.util.BaseBlockCipher.engineDoFinal(Unknown Source) at javax.crypto.Cipher.doFinal(DashoA13*..) at javax.crypto.CipherInputStream.a(DashoA13*..) at javax.crypto.CipherInputStream.read(DashoA13*..) at javax.crypto.CipherInputStream.read(DashoA13*..) at enctest.Main.main(Main.java:70) And this Exception when encrypting in CCM mode (line 70 is bOut.write(block, 0, i);): Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException at java.lang.System.arraycopy(Native Method) at org.bouncycastle.crypto.modes.CCMBlockCipher.processPacket(Unknown Source) at org.bouncycastle.crypto.modes.CCMBlockCipher.doFinal(Unknown Source) at org.bouncycastle.jcajce.provider.symmetric.util.BaseBlockCipher$AEADGenericBlockCipher.doFinal(Unknown Source) at org.bouncycastle.jcajce.provider.symmetric.util.BaseBlockCipher.engineDoFinal(Unknown Source) at javax.crypto.Cipher.doFinal(DashoA13*..) at javax.crypto.CipherInputStream.a(DashoA13*..) at javax.crypto.CipherInputStream.read(DashoA13*..) at javax.crypto.CipherInputStream.read(DashoA13*..) at enctest.Main.main(Main.java:70)

  Read the article

• Shouldn’t Bind() pass child control’s values to GridView before Page.PreRender?

  - by SourceC

  hello, For controls such as the GridView, DetailsView, and FormView controls, data-binding expressions are resolved automatically during the control's PreRender event But doesn’t data source control perform updates prior to Page.PreRender event? Meaning, shouldn’t Bind() pass child control’s values to GridView ( so they can be passed to data source control as parameters ) before data source control updates the data source, thus before Page.PreRender event? thanx

  Read the article

• F# Add Constructor to a Record?

  - by akaphenom

  Basically I want to have a single construct to deal with serializing to both JSON and formatted xml. Records workd nicley for serializing to/from json. However XmlSerializer requires a parameterless construtor. I don't really want to have to go through the exercise of building class objects for these constructs (principal only). I was hoping there could be some shortcut for getting a parameterless constructor onto a record (perhaps with a wioth statement or something). I can't get it to behave - has anybody in the community had any luck? module JSONExample open System open System.IO open System.Net open System.Text open System.Web open System.Xml open System.Security.Authentication open System.Runtime.Serialization //add assemnbly reference System.Runtime.Serialization System.Xml open System.Xml.Serialization open System.Collections.Generic [<DataContract>] type ChemicalElementRecord = { [<XmlAttribute("name")>] [<field: DataMember(Name="name") >] Name:string [<XmlAttribute("name")>] [<field: DataMember(Name="boiling_point") >] BoilingPoint:string [<XmlAttribute("atomic-mass")>] [<field: DataMember(Name="atomic_mass") >] AtomicMass:string } [<XmlRoot("freebase")>] [<DataContract>] type FreebaseResultRecord = { [<XmlAttribute("code")>] [<field: DataMember(Name="code") >] Code:string [<XmlArrayAttribute("results")>] [<XmlArrayItem(typeof<ChemicalElementRecord>, ElementName = "chemical-element")>] [<field: DataMember(Name="result") >] Result: ChemicalElementRecord array [<XmlElement("message")>] [<field: DataMember(Name="message") >] Message:string } let getJsonFromWeb() = let query = "[{'type':'/chemistry/chemical_element','name':null,'boiling_point':null,'atomic_mass':null}]" let query = query.Replace("'","\"") let queryUrl = sprintf "http://api.freebase.com/api/service/mqlread?query=%s" "{\"query\":"+query+"}" let request : HttpWebRequest = downcast WebRequest.Create(queryUrl) request.Method <- "GET" request.ContentType <- "application/x-www-form-urlencoded" let response = request.GetResponse() let result = try use reader = new StreamReader(response.GetResponseStream()) reader.ReadToEnd(); finally response.Close() let data = Encoding.Unicode.GetBytes(result); let stream = new MemoryStream() stream.Write(data, 0, data.Length); stream.Position <- 0L stream let test = // get some JSON from the web let stream = getJsonFromWeb() // convert the stream of JSON into an F# Record let JsonSerializer = Json.DataContractJsonSerializer(typeof<FreebaseResultRecord>) let result: FreebaseResultRecord = downcast JsonSerializer.ReadObject(stream) // save the Records to disk as JSON use fs = new FileStream(@"C:\temp\freebase.json", FileMode.Create) JsonSerializer.WriteObject(fs,result) fs.Close() // save the Records to disk as System Controlled XML let xmlSerializer = DataContractSerializer(typeof<FreebaseResultRecord>); use fs = new FileStream(@"C:\temp\freebase.xml", FileMode.Create) xmlSerializer.WriteObject(fs,result) fs.Close() use fs = new FileStream(@"C:\temp\freebase-pretty.xml", FileMode.Create) let xmlSerializer = XmlSerializer(typeof<FreebaseResultRecord>) xmlSerializer.Serialize(fs,result) fs.Close() ignore(test)

  Read the article

• Help with chat server

  - by mithun1538

  I am designing a chat server in java. The communication is Http based and not socket based. In the client side I have an applet. In the server side I have a servlet. Applet: I create a new thread to listen for incoming messages(GET method). The main thread is used to send messages(POST messages). The partial code is : public void start() { System.out.println("Creating new thread"); Thread thread = new Thread(this); thread.start(); } private String getNewMessage() { System.out.println("Inside getNewMessage"); String msg = null; try { while(msg == null) { System.out.println("Trying to listen to servlet"); URL servlet = new URL(getCodeBase(), "NewServlet?mode=msg"); URLConnection con = servlet.openConnection(); con.setUseCaches(false); DataInputStream din = new DataInputStream(new BufferedInputStream(con.getInputStream())); msg = din.readUTF(); System.out.println("message read :" + msg); } } catch (Exception e) { e.printStackTrace(); } return msg + "\n"; } public void run() { System.out.println("Inside new thread"); while(true) { System.out.println("inside first while"); String newMsg = getNewMessage(); chatOutput.append(newMsg); System.out.println("Appended!!"); } } private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) { String message = chatInput.getText(); chatInput.setText(""); chatOutput.append(message + "\n"); try { System.out.println("Trying to send msg :" + message); URL url = new URL(getCodeBase(), "NewServlet"); URLConnection servletConnection = url.openConnection(); servletConnection.setDoInput(true); servletConnection.setDoOutput(true); servletConnection.setUseCaches(false); servletConnection.setRequestProperty("Content-Type", "application/octet-stream"); ObjectOutputStream out = new ObjectOutputStream(servletConnection.getOutputStream()); out.writeObject(message); out.flush(); out.close(); System.out.println("Message sent!"); } catch (Exception e) { e.printStackTrace(); } } This next code is from the servlet side. it uses the Observable interface to identify and send messages to clients. public class NewServlet extends HttpServlet { // getNextMessage() returns the next new message. // It blocks until there is one. public String getNextMessage() { // Create a message sink to wait for a new message from the // message source. System.out.println("inside getNextMessage"); return new MessageSink().getNextMessage(source);} @Override protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { System.out.println("Inside Doget"); response.setContentType("text/plain"); PrintWriter out = response.getWriter(); out.println(getNextMessage()); } // broadcastMessage() informs all currently listening clients that there // is a new message. Causes all calls to getNextMessage() to unblock. public void broadcastMessage(String message) { // Send the message to all the HTTP-connected clients by giving the // message to the message source source.sendMessage(message); } @Override protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { System.out.println("Inside DoPost"); try { ObjectInputStream din= new ObjectInputStream(request.getInputStream()); String message = (String)din.readObject(); System.out.println("received msg"); if (message != null) broadcastMessage(message); System.out.println("Called broadcast"); // Set the status code to indicate there will be no response response.setStatus(response.SC_NO_CONTENT); } catch (Exception e) { e.printStackTrace(); } } /** * Returns a short description of the servlet. * @return a String containing servlet description */ @Override public String getServletInfo() { return "Short description"; } MessageSource source = new MessageSource();} class MessageSource extends Observable { public void sendMessage(String message) { System.out.println("inside sendMsg"); setChanged(); notifyObservers(message); } } class MessageSink implements Observer { String message = null; // set by update() and read by getNextMessage() // Called by the message source when it gets a new message synchronized public void update(Observable o, Object arg) { // Get the new message message = (String)arg; // Wake up our waiting thread notify(); } // Gets the next message sent out from the message source synchronized public String getNextMessage(MessageSource source) { // Tell source we want to be told about new messages source.addObserver(this); System.out.println("AddedObserver"); // Wait until our update() method receives a message while (message == null) { try { wait(); } catch (Exception ignored) { } } // Tell source to stop telling us about new messages source.deleteObserver(this); // Now return the message we received // But first set the message instance variable to null // so update() and getNextMessage() can be called again. String messageCopy = message; message = null; System.out.println("Returning msg"); return messageCopy; } } As you can see I have included System.out.println("Some message"); in some places. this was just for debugging purposes. In java console, i get the following output: Creating new thread Inside new thread. inside first while. Inside getNewMessage. Trying to listen to servlet. In the servlet side, i get the following output in the tomcat logs: Inside Doget. inside getNextMessage. AddedObserver. After i type a message in the applet, and send it, I get the foll output in java console: Trying to send msg :you deR?? Message sent! But in servlet side, I dont get anything in the logs. I used the O'Reily Java Servlet Programming as reference(The observer interface comes from there). But I am not getting any chat communication between two clients. As can be understood from the logs, the POST method is not called. Any reason for this?

  Read the article

• deleting eventlog

  - by user311130

  Hey, How can I delete a specific eventlog entry (say id 130 with source: Myprog) or delete all eventlogs from a specific source without deleting the whole eventlogs under "Application" folder? public static void deleteEvent() { string logName; if (EventLog.SourceExists(SOURCE)) { logName = EventLog.LogNameFromSourceName(SOURCE, "."); EventLog.Delete(logName); } } I tried the following code, but it deleted all the eventlogs under "Application". Cheers,

  Read the article

• Junit (3.8.1) testing that an exception is thrown (works in unit test, fails when added to a testSui

  - by Mike Cargal

  I'm trying to test that I'm throwing an exception when appropriate. In my test class I have a method similar to the following: public void testParseException() { try { ClientEntitySingleton.getInstance(); fail("should have thrown exception."); } catch (RuntimeException re) { assertEquals( "<exception message>", re.getMessage()); } } This works fine (green bar) whenever I run that single unitTest class. However, when I add that test to a testSuite, I get a red bar Unit test failure reported on the exception. One more thing... it works in the testSuite, if it's the first test in the suite. Actually, I'm doing two of these tests and just figured out that if I make them the first two tests in the suite, all is good, but I get this failure if a "regular" test precedes it. So I have a work-around, but no real answer. Any ideas? Heres'a stack trace of the "failure" java.lang.RuntimeException: ProcEntity client dn="Xxxxxx/Xxxx/XXX" is defined multiple times. at com.someco.someprod.clientEntityManagement.ClientEntitySingleton.addClientEntity(ClientEntitySingleton.java:247) at com.someco.someprod.clientEntityManagement.ClientEntitySingleton.startElement(ClientEntitySingleton.java:264) at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XMLParser.parse(Unknown Source) at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source) at com.someco.someprod.clientEntityManagement.ClientEntitySingleton.parse(ClientEntitySingleton.java:216) at com.someco.someprod.clientEntityManagement.ClientEntitySingleton.reload(ClientEntitySingleton.java:303) at com.someco.someprod.clientEntityManagement.ClientEntitySingleton.setInputSourceProvider(ClientEntitySingleton.java:88) at com.someco.someprod.clientEntityManagement.test.TestClientBase.setUp(TestClientBase.java:17) at com.someco.someprod.clientEntityManagement.test.TestClientEntityDup.setUp(TestClientEntityDup.java:8) at junit.framework.TestCase.runBare(TestCase.java:125) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:118) at junit.framework.TestSuite.runTest(TestSuite.java:208) at junit.framework.TestSuite.run(TestSuite.java:203) at junit.framework.TestSuite.runTest(TestSuite.java:208) at junit.framework.TestSuite.run(TestSuite.java:203) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:128) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)

  Read the article

• SSIS 2008 - How to read from SQL Server Compact Edition file?

  - by Gustavo Cavalcanti

  I can see "SQL Server Compact Destination" under Data Flow Destinations, but I am looking for its source counterpart. If I choose ADO.Net source and create a new connection, there's no provider for SQL CE. What am I missing? Thanks! Update: I am able to create a "Data Source" (under "Data Sources" folder in my SSIS project") that connects to an existing Sql CE file. But how can I use this Data Source in my data flow?

  Read the article

• RDF-raptor-parser

  - by naveen

  Hi All, I am trying to parse the rdf file but I am getting error while executing following code in ubuntu RDF::Reader.open("http://datagraph.org/jhacker/foaf.rdf") do |reader| reader.each_statement do |statement| puts statement.inspect end end as LoadError: Could not open library 'libraptor': libraptor: cannot open shared object file: No such file or directory. Could not open library 'libraptor.so': libraptor.so: cannot open shared object file: No such file or directory I installed all the required gems: rdf rdf-raptor ffi rdf-json rdf-trix Please help me how to rectify this problem thanks in advance Naveenkumr.R

  Read the article

• Opening a file in c++ by using a string array of adress

  - by muhammad-aslam

  Hello guYz plz help me out in making it possible to open the files by the adress provided in an array of strings......... a way to open file is as given below... ifstream infile; infile.open("d:\aslam.txt"); but how can i open file providing an array of string as an adress of file..... like this infile.open(arr[i]); (but its not working) plz help me.........

  Read the article

• blank to numeric conversion derived column

  - by praveen

  Hi All, I have a source column with blank (not "NULL"), and target as numeric. while converting using the data conversion it is not converting due to balnk source value so I used derived column to replace a blank value with NULL or 0 as (source column == " ") ? "0" : source column but its not giving the value as 0 in the blank place. thanks prav

  Read the article

< Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >