lazy loading - Page 282

Windows for IoT, continued

- by Valter Minute

Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products. *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

Read the article

Saving child collections with NHibernate

- by Ben

Hi, I am in the process or learning NHibernate so bare with me. I have an Order class and a Transaction class. Order has a one to many association with transaction. The transaction table in my database has a not null constraint on the OrderId foreign key. Order class: public class Order { public virtual Guid Id { get; set; } public virtual DateTime CreatedOn { get; set; } public virtual decimal Total { get; set; } public virtual ICollection<Transaction> Transactions { get; set; } public Order() { Transactions = new HashSet<Transaction>(); } } Order Mapping: <class name="Order" table="Orders"> <cache usage="read-write"/> <id name="Id"> <generator class="guid"/> </id> <property name="CreatedOn" type="datetime"/> <property name="Total" type="decimal"/> <set name="Transactions" table="Transactions" lazy="false" inverse="true"> <key column="OrderId"/> <one-to-many class="Transaction"/> </set> Transaction Class: public class Transaction { public virtual Guid Id { get; set; } public virtual DateTime ExecutedOn { get; set; } public virtual bool Success { get; set; } public virtual Order Order { get; set; } } Transaction Mapping: <class name="Transaction" table="Transactions"> <cache usage="read-write"/> <id name="Id" column="Id" type="Guid"> <generator class="guid"/> </id> <property name="ExecutedOn" type="datetime"/> <property name="Success" type="bool"/> <many-to-one name="Order" class="Order" column="OrderId" not-null="true"/> Really I don't want a bidirectional association. There is no need for my transaction objects to reference their order object directly (I just need to access the transactions of an order). However, I had to add this so that Order.Transactions is persisted to the database: Repository: public void Update(Order entity) { using (ISession session = NHibernateHelper.OpenSession()) { using (ITransaction transaction = session.BeginTransaction()) { session.Update(entity); foreach (var tx in entity.Transactions) { tx.Order = entity; session.SaveOrUpdate(tx); } transaction.Commit(); } } } My problem is that this will then issue an update for every transaction on the order collection (regardless of whether it has changed or not). What I was trying to get around was having to explicitly save the transaction before saving the order and instead just add the transactions to the order and then save the order: public void Can_add_transaction_to_existing_order() { var orderRepo = new OrderRepository(); var order = orderRepo.GetById(new Guid("aa3b5d04-c5c8-4ad9-9b3e-9ce73e488a9f")); Transaction tx = new Transaction(); tx.ExecutedOn = DateTime.Now; tx.Success = true; order.Transactions.Add(tx); orderRepo.Update(order); } Although I have found quite a few articles covering the set up of a one-to-many association, most of these discuss retrieving of data and not persisting back. Many thanks, Ben

Read the article

jqGrid - dynamically load different drop down values for different rows depending on another column value

- by Renso

Goal: As we all know the jqGrid examples in the demo and the Wiki always refer to static values for drop down boxes. This of course is a personal preference but in dynamic design these values should be populated from the database/xml file, etc, ideally JSON formatted. Can you do this in jqGrid, yes, but with some custom coding which we will briefly show below (refer to some of my other blog entries for a more detailed discussion on this topic). What you CANNOT do in jqGrid, referrign here up and to version 3.8.x, is to load different drop down values for different rows in the jqGrid. Well, not without some trickery, which is what this discussion is about. Issue: Of course the issue is that jqGrid has been designed for high performance and thus I have no issue with them loading a reference to a single drop down values list for every column. This way if you have 500 rows or one, each row only refers to a single list for that particuolar column. Nice! SO how easy would it be to simply traverse the grid once loaded on gridComplete or loadComplete and simply load the select tag's options from scratch, via ajax, from memory variable, hard coded etc? Impossible! Since their is no embedded SELECT tag within each cell containing the drop down values (remeber it only has a reference to that list in memory), all you will see when you inspect the cell prior to clicking on it, or even before and on beforeEditCell, is an empty <TD></TD>. When trying to load that list via a click event on that cell will temporarily load the list but jqGrid's last internal callback event will remove it and replace it with the old one, and you are back to square one. Solution: Yes, after spending a few hours on this found a solution to the problem that does not require any updates to jqGrid source code, thank GOD! Before we get into the coding details, the solution here can of course be customized to suite your specific needs, this one loads the entire drop down list that would be needed across all rows once into global variable. I then parse this object that contains all the properties I need to filter the rows depending on which ones I want the user to see based off of another cell value in that row. This only happens when clicking the cell, so no performance penalty. You may of course to load it via ajax when the user clicks the cell, but I found it more effecient to load the entire list as part of jqGrid's normal editoptions: { multiple: false, value: listingStatus } colModel options which again keeps only a reference to the sinlge list, no duplciation. Lets get into the meat and potatoes of it. var acctId = $('#Id').val(); var data = $.ajax({ url: $('#ajaxGetAllMaterialsTrackingLookupDataUrl').val(), data: { accountId: acctId }, dataType: 'json', async: false, success: function(data, result) { if (!result) alert('Failure to retrieve the Alert related lookup data.'); } }).responseText; var lookupData = eval('(' + data + ')'); var listingCategory = lookupData.ListingCategory; var listingStatus = lookupData.ListingStatus; var catList = '{'; $(lookupData.ListingCategory).each(function() { catList += this.Id + ':"' + this.Name + '",'; }); catList += '}'; var lastsel; var ignoreAlert = true; $(item) .jqGrid({ url: listURL, postData: '', datatype: "local", colNames: ['Id', 'Name', 'Commission<br />Rep', 'Business<br />Group', 'Order<br />Date', 'Edit', 'TBD', 'Month', 'Year', 'Week', 'Product', 'Product<br />Type', 'Online/<br />Magazine', 'Materials', 'Special<br />Placement', 'Logo', 'Image', 'Text', 'Contact<br />Info', 'Everthing<br />In', 'Category', 'Status'], colModel: [ { name: 'Id', index: 'Id', hidden: true, hidedlg: true }, { name: 'AccountName', index: 'AccountName', align: "left", resizable: true, search: true, width: 100 }, { name: 'OnlineName', index: 'OnlineName', align: 'left', sortable: false, width: 80 }, { name: 'ListingCategoryName', index: 'ListingCategoryName', width: 85, editable: true, hidden: false, edittype: "select", editoptions: { multiple: false, value: eval('(' + catList + ')') }, editrules: { required: false }, formatoptions: { disabled: false} } ], jsonReader: { root: "List", page: "CurrentPage", total: "TotalPages", records: "TotalRecords", userdata: "Errors", repeatitems: false, id: "0" }, rowNum: $rows, rowList: [10, 20, 50, 200, 500, 1000, 2000], imgpath: jQueryImageRoot, pager: $(item + 'Pager'), shrinkToFit: true, width: 1455, recordtext: 'Traffic lines', sortname: 'OrderDate', viewrecords: true, sortorder: "asc", altRows: true, cellEdit: true, cellsubmit: "remote", cellurl: editURL + '?rows=' + $rows + '&page=1', loadComplete: function() { }, gridComplete: function() { }, loadError: function(xhr, st, err) { }, afterEditCell: function(rowid, cellname, value, iRow, iCol) { var select = $(item).find('td.edit-cell select'); $(item).find('td.edit-cell select option').each(function() { var option = $(this); var optionId = $(this).val(); $(lookupData.ListingCategory).each(function() { if (this.Id == optionId) { if (this.OnlineName != $(item).getCell(rowid, 'OnlineName')) { option.remove(); return false; } } }); }); }, search: true, searchdata: {}, caption: "List of all Traffic lines", editurl: editURL + '?rows=' + $rows + '&page=1', hiddengrid: hideGrid Here is the JSON data returned via the ajax call during the jqGrid function call above (NOTE it must be { async: false}: {"ListingCategory":[{"Id":29,"Name":"Document Imaging & Management","OnlineName":"RF Globalnet"} ,{"Id":1,"Name":"Ancillary Department Hardware","OnlineName":"Healthcare Technology Online"} ,{"Id":2,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":3,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":4,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":5,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":6,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":7,"Name":"EMR/EHR Software","OnlineName":"Healthcare Technology Online"}]} I only need the Id and Name for the drop down list, but the third column in the JSON object is important, it is the only that I match up with the OnlineName in the jqGrid column, and then in the loop during afterEditCell simply remove the ones I don't want the user to see. That's it!

Read the article

ROracle support for TimesTen In-Memory Database

- by Sherry LaMonica

Today's guest post comes from Jason Feldhaus, a Consulting Member of Technical Staff in the TimesTen Database organization at Oracle. He shares with us a sample session using ROracle with the TimesTen In-Memory database. Beginning in version 1.1-4, ROracle includes support for the Oracle Times Ten In-Memory Database, version 11.2.2. TimesTen is a relational database providing very fast and high throughput through its memory-centric architecture. TimesTen is designed for low latency, high-volume data, and event and transaction management. A TimesTen database resides entirely in memory, so no disk I/O is required for transactions and query operations. TimesTen is used in applications requiring very fast and predictable response time, such as real-time financial services trading applications and large web applications. TimesTen can be used as the database of record or as a relational cache database to Oracle Database. ROracle provides an interface between R and the database, providing the rich functionality of the R statistical programming environment using the SQL query language. ROracle uses the OCI libraries to handle database connections, providing much better performance than standard ODBC.The latest ROracle enhancements include: Support for Oracle TimesTen In-Memory Database Support for Date-Time using R's POSIXct/POSIXlt data types RAW, BLOB and BFILE data type support Option to specify number of rows per fetch operation Option to prefetch LOB data Break support using Ctrl-C Statement caching support Times Ten 11.2.2 contains enhanced support for analytics workloads and complex queries: Analytic functions: AVG, SUM, COUNT, MAX, MIN, DENSE_RANK, RANK, ROW_NUMBER, FIRST_VALUE and LAST_VALUE Analytic clauses: OVER PARTITION BY and OVER ORDER BY Multidimensional grouping operators: Grouping clauses: GROUP BY CUBE, GROUP BY ROLLUP, GROUP BY GROUPING SETS Grouping functions: GROUP, GROUPING_ID, GROUP_ID WITH clause, which allows repeated references to a named subquery block Aggregate expressions over DISTINCT expressions General expressions that return a character string in the source or a pattern within the LIKE predicate Ability to order nulls first or last in a sort result (NULLS FIRST or NULLS LAST in the ORDER BY clause) Note: Some functionality is only available with Oracle Exalytics, refer to the TimesTen product licensing document for details. Connecting to TimesTen is easy with ROracle. Simply install and load the ROracle package and load the driver. > install.packages("ROracle") > library(ROracle) Loading required package: DBI > drv <- dbDriver("Oracle") Once the ROracle package is installed, create a database connection object and connect to a TimesTen direct driver DSN as the OS user. > conn <- dbConnect(drv, username ="", password="", dbname = "localhost/SampleDb_1122:timesten_direct") You have the option to report the server type - Oracle or TimesTen? > print (paste ("Server type =", dbGetInfo (conn)$serverType)) [1] "Server type = TimesTen IMDB" To create tables in the database using R data frame objects, use the function dbWriteTable. In the following example we write the built-in iris data frame to TimesTen. The iris data set is a small example data set containing 150 rows and 5 columns. We include it here not to highlight performance, but so users can easily run this example in their R session. > dbWriteTable (conn, "IRIS", iris, overwrite=TRUE, ora.number=FALSE) [1] TRUE Verify that the newly created IRIS table is available in the database. To list the available tables and table columns in the database, use dbListTables and dbListFields, respectively. > dbListTables (conn) [1] "IRIS" > dbListFields (conn, "IRIS") [1] "SEPAL.LENGTH" "SEPAL.WIDTH" "PETAL.LENGTH" "PETAL.WIDTH" "SPECIES" To retrieve a summary of the data from the database we need to save the results to a local object. The following call saves the results of the query as a local R object, iris.summary. The ROracle function dbGetQuery is used to execute an arbitrary SQL statement against the database. When connected to TimesTen, the SQL statement is processed completely within main memory for the fastest response time. > iris.summary <- dbGetQuery(conn, 'SELECT SPECIES, AVG ("SEPAL.LENGTH") AS AVG_SLENGTH, AVG ("SEPAL.WIDTH") AS AVG_SWIDTH, AVG ("PETAL.LENGTH") AS AVG_PLENGTH, AVG ("PETAL.WIDTH") AS AVG_PWIDTH FROM IRIS GROUP BY ROLLUP (SPECIES)') > iris.summary SPECIES AVG_SLENGTH AVG_SWIDTH AVG_PLENGTH AVG_PWIDTH 1 setosa 5.006000 3.428000 1.462 0.246000 2 versicolor 5.936000 2.770000 4.260 1.326000 3 virginica 6.588000 2.974000 5.552 2.026000 4 <NA> 5.843333 3.057333 3.758 1.199333 Finally, disconnect from the TimesTen Database. > dbCommit (conn) [1] TRUE > dbDisconnect (conn) [1] TRUE We encourage you download Oracle software for evaluation from the Oracle Technology Network. See these links for our software: Times Ten In-Memory Database, ROracle. As always, we welcome comments and questions on the TimesTen and Oracle R technical forums.

Read the article

Soft lockup after upgrade - cannot install from live CD

- by nbm

I dual-boot MacIntel Core 2 duo. nVidia graphics. Ran upgrade from ubuntu 13.10 to 14.04 (64 bit). On restart ran into {numbers} Bug: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] Tried loading earlier kernel: same problem Tried re-installing ubuntu from a liveCD that has worked in the past: version 13.04. Same problem. Tried re-partitioning hard drive using Mac OS X disk utility and then installing ubuntu 14.04LTS from liveCD. Same problem. Not possible to verify liveCD disk (creates same "soft lockup" bug.) Tried installing from the liveCD with version 13.04 that I know works (that's how I got Ubuntu on this machine in the first place.) Same problem. I know this is not a hardware problem as OS X works just fine, I am using it right now on the same machine. I have been using various versions of Ubuntu for 2 years. Things I cannot do: Open a terminal Verify CD image Start ubuntu from CD (same soft lockup problem) This problem is similar to some other questions, none of which have been satisfactorily answered: Ubuntu 14.04 soft lockup on Vostro 3500 Cannot do fresh install of Ubuntu 13.04 while booting from DVD: "soft lockup" bug Live CD stalls when installing Ubuntu 13.10 UPDATE 6/11/14: Following some much-appreciated advice from bain (see below) I burned a 12.04LTS disk and started with kernel parameters: noapic, no1apic, acpi=off, nomodeset, elevator=deadline, and clocksource=jiffies. With all of these parameters I was able to load the 12.04LTS CD ("Try without installing"). It worked fine. However, as soon as I tried to install Ubuntu from the CD, my wired ethernet (eth0) connection would hang. There are already various askubuntu questions and bug reports about this problem, none of which had answers for me. (E.g., dhclient eth0 does nothing, none of the various reset commands does anything, manually setting IP &etc does nothing. I could reliably kill the ethernet connection by clicking "install ubuntu" every single time.) I could go ahead and install 12.04 without an internet connection, but the install would freeze after mostly completing (I tried several times.) There were some relevant error messages in the details of the install output script that, IIRC, had to do with searching for missing files and not being able to access eth0 (internet) to get them. To be honest I gave up at that point and I'm not sure I wrote those down. If I find some notes I will post them. At this point I no longer have Ubuntu on my system. I wiped the partitions and am using exclusively OS X. I am leaving this question in case it helps anyone else with similar problems. I love open source and I love Linux, and the next machine I get I will probably just build from Arch. At the moment I miss repositories and a lot of other things about Ubuntu, but the OS X terminal is 'nix, I can pretty much use all the open source apps I like, and while I am not a fan of the Apple software it gets the job done for me. Unlike Ubuntu, which can't even install. I realize this isn't necessarily a place for a soapbox speech, but when I first installed 12.04 several years ago there were already people in the community complaining that Canonical was going too "commercial". But I loved it. Several years later and all I've seen is Canonical adding more not-so-useful bells and whistles to Ubuntu while continually failing to fix basic problems on upgrades. With a dual-boot (and sometimes triple-boot) system it always took me some tweaking to get an upgrade to work, and to some extent that is okay. But at this point I feel like Canonical ought to just put a price tag on Ubuntu. All I see is more commercialism and advertising and product tie-ins, and ongoing problems do not get fixed. I am a big fan of open-source, not-for profit enterprise. I am also a big fan of for-profit enterprise, which certainly has its place and usefulness. I am not a fan of companies who pretend to be in favor of open source but really are just out to make a buck, and IMNSHO that is what Canonical has become. This is a great community and I wish you all the best, but my next install of Linux will not be Ubuntu.

Read the article

JPA @Version behaviour

- by Albert Kam

Hello, im using JPA2 with Hibernate 3.6.x I have made a simple testing on the @Version. Let's say we have 2 entities, Entity Team has a List of Player Entities, bidirectional relationship, lazy fetchtype, cascade-type All Both entities have @Version And here are the scenarios : Whenever a modification is made to one of the team/player entity, the team/player's version will be increased when flushed/commited (version on the modified record is increased). Adding a new player entity to team's collection using persist, the entity the team's version will be assigned after persist (adding a new entity, that new entity will got it's version). Whenever an addition/modification/removal is made to one of the player entity, the team's version will be increased when flushed/commited. (add/modify/remove child record, parent's version got increased also) I can understand the number 1 and 2, but the number 3, i dont understand, why the team's version got increased ? And that makes me think of other questions : What if i got Parent <- child <- granchildren relation ship. Will an addition or modification on the grandchildren increase the version of child and parent ? In scenario number 2, how can i get the version on the team before it's commited, like perhaps by using flush ? Is it a recommended way to get the parent's version after we do something to the child[s] ? Here's a code sample from my experiment, proving that when ReceivingGoodDetail is the owning side, and the version got increased in the ReceivingGood after flushing. Sorry that this use other entities, but ReceivingGood is like the Team, ReceivingGoodDetail is like the Player. 1 ReceivingGood/Team, many ReceivingGoodDetail/Player. /* Hibernate: select receivingg0_.id as id9_14_, receivingg0_.creationDate as creation2_9_14_, .. too long Hibernate: select product0_.id as id0_4_, product0_.creationDate as creation2_0_4_, .. too long before persisting the new detail, version of header is : 14 persisting the detail 1c9f81e1-8a49-4189-83f5-4484508e71a7 printing the size of the header : Hibernate: select details0_.receivinggood_id as receivi13_9_8_, details0_.id as id8_, details0_.id as id10_7_, .. too long 7 after persisting the new detail, version of header is : 14 Hibernate: insert into ReceivingGoodDetail (creationDate, modificationDate, usercreate_id, usermodify_id, version, buyQuantity, buyUnit, internalQuantity, internalUnit, product_id, receivinggood_id, supplierLotNumber, id) values (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) Hibernate: update ReceivingGood set creationDate=?, modificationDate=?, usercreate_id=?, usermodify_id=?, version=?, purchaseorder_id=?, supplier_id=?, transactionDate=?, transactionNumber=?, transactionType=?, transactionYearMonth=?, warehouse_id=? where id=? and version=? after flushing, version of header is now : 15 */ public void addDetailWithoutTouchingCollection() { String headerId = "3b373f6a-9cd1-4c9c-9d46-240de37f6b0f"; ReceivingGood receivingGood = em.find(ReceivingGood.class, headerId); // create a new detail ReceivingGoodDetail receivingGoodDetailCumi = new ReceivingGoodDetail(); receivingGoodDetailCumi.setBuyUnit("Drum"); receivingGoodDetailCumi.setBuyQuantity(1L); receivingGoodDetailCumi.setInternalUnit("Liter"); receivingGoodDetailCumi.setInternalQuantity(10L); receivingGoodDetailCumi.setProduct(getProduct("b3e83b2c-d27b-4572-bf8d-ac32f6de5eaa")); receivingGoodDetailCumi.setSupplierLotNumber("Supplier Lot 1"); decorateEntity(receivingGoodDetailCumi, getUser("3978fee3-9690-4377-84bd-9fb05928a6fc")); receivingGoodDetailCumi.setReceivingGood(receivingGood); System.out.println("before persisting the new detail, version of header is : " + receivingGood.getVersion()); // persist it System.out.println("persisting the detail " + receivingGoodDetailCumi.getId()); em.persist(receivingGoodDetailCumi); System.out.println("printing the size of the header : "); System.out.println(receivingGood.getDetails().size()); System.out.println("after persisting the new detail, version of header is : " + receivingGood.getVersion()); em.flush(); System.out.println("after flushing, version of header is now : " + receivingGood.getVersion()); }

Read the article

Syntax error, unexpected '}' wordpress error

- by Zach Johnson

Hello I am not a PHP programmer so I have no idea what the problem is here. Basiclly I am trying to use a wordpress theme but I get this error The Parse error: syntax error, unexpected '}' in / home/a5618915/public_html/photo/wp-content/themes/iphoto/functions.php on line 1 I have no Idea what exactly is wrong in the php file. The code for the functions.php is below. If someone could point out whats wrong I would be really grateful. <?php define('THEME_NAME','iphoto'); load_theme_textdomain( THEME_NAME,TEMPLATEPATH .'/languages'); add_custom_background(); add_theme_support( 'automatic-feed-links' ); add_theme_support( 'post-formats', array( 'video')); if ( function_exists('register_nav_menus') ) { register_nav_menus(array('primary' => 'header')); } add_action('wp_ajax_b_ajax_post_action', 'b_ajax_callback'); function b_ajax_callback() { global $wpdb; if(isset($_POST['type']) && $_POST['type'] == 'upload') { $clickedID = $_POST['data']; $filename = $_FILES[$clickedID]; $filename['name'] = preg_replace('/[^a-zA-Z0-9._-]/', '', $filename['name']); $override['test_form'] = false; $override['action'] = 'wp_handle_upload'; $uploaded_file = wp_handle_upload($filename,$override); $upload_tracking[] = $clickedID; update_option($clickedID, $uploaded_file['url'] ); if(!empty($uploaded_file['error'])) {echo 'Upload Error: ' . $uploaded_file['error']; } else { echo $uploaded_file['url']; } } die(); } function post_thumbnail($a){ global $post; $post_img = ''; ob_start(); ob_end_clean(); $output = preg_match_all('/\<img.+?src="(.+?)".*?\/>/is',$post->post_content,$matches ,PREG_SET_ORDER); $cnt = count( $matches ); if($a==1){ if($cnt>0){ if($cnt>1){ if($cnt>3) $cnt=3; for($i=0;$i<$cnt;$i++){ $post_current = $i+1; $post_img_src = $matches[$i][1]; if($i==0){$post_spans .= '<span class="current">'.$post_current.'</span>';}else{ $post_spans .= '<span>'.$post_current.'</span>'; } $post_imgs .='<img src="'.get_bloginfo('template_url').'/timthumb.php?src='.$post_img_src.'&w=285&zc=1" />'; } $post_img = $post_imgs.'<span class="imgNav">'.$post_spans.'</span>'; }else{ $post_img_src = $matches [0][1]; $post_img = '<img src="'.get_bloginfo('template_url').'/timthumb.php?src='.$post_img_src.'&w=285&zc=1" />'; } echo $post_img; } }else{ return $cnt; } } function post_content_thumbnail($c) { if(is_single()){ $c = preg_replace('/\width="*".+?height="*"/i', '', $c); $s = array('/src="(.+?.(jpg|bmp|png|jepg|gif))".+?/i' => 'src="'.get_bloginfo("template_url").'/timthumb.php?src=$1&h=440&zc=1"'); foreach($s as $p => $r){ $c = preg_replace($p,$r,$c); } return $c; } } add_filter( 'the_content', 'post_content_thumbnail' ); function ajax_post(){ if( isset($_GET['action'])&& $_GET['action'] == 'ajax_post'){ if(isset($_GET['cat'])){ $args = array( 'category_name' => $_GET['cat'], 'paged' => $_GET['pag'] ); }else if(isset($_GET['pag'])){ $args = array( 'paged' => $_GET['pag'] ); } query_posts($args); if(have_posts()){while (have_posts()):the_post();?> <?php get_template_part( 'content', get_post_format() ); ?> <?php endwhile;} die(); }else{return;} } add_action('init', 'ajax_post'); function pagenavi( $p = 2 ) { if ( is_singular() ) return; global $wp_query,$paged; $max_page = $wp_query->max_num_pages; if ( $max_page == 1 ){ echo '<span id="post-current">1</span> / <span id="post-count">1</span>'; return; } if ( empty( $paged ) ) $paged = 1; if ( $paged >1 ) echo "<a id='prev' title='Prev' href='",esc_html( get_pagenum_link( $paged -1 ) ),"'><<</a> "; echo '<span id="post-current">'.$paged .'</span> / <span id="post-count">'.$max_page .'</span>'; if ( $paged <$max_page ) echo "<a id='next' title='Next' href='",esc_html( get_pagenum_link( $paged +1) ),"'>>></a> "; } function iphoto_comment($comment,$args,$depth) { $GLOBALS['comment'] = $comment; ;echo ' <li ';comment_class();;echo ' id="li-comment-';comment_ID() ;echo '" > <div id="comment-';comment_ID();;echo '" class="comment-body"> <div class="commentmeta">';echo get_avatar( $comment->comment_author_email,$size = '48');;echo '</div> ';if ($comment->comment_approved == '0') : ;echo ' <em>';_e('Your comment is awaiting moderation.') ;echo '</em><br /> ';endif;;echo ' <div class="commentmetadata"> - ';printf(__('%1$s %2$s'),get_comment_date('Y.n.d'),get_comment_time('G:i'));;echo '</div> <div class="reply">';comment_reply_link(array_merge( $args,array('depth'=>$depth,'max_depth'=>$args['max_depth'],'reply_text'=>__('Reply')))) ;echo '</div> <div class="vcard">';printf(__('%s'),get_comment_author_link()) ;echo '</div> ';comment_text() ;echo ' </div> '; } add_action('admin_init', 'iphoto_init'); function iphoto_init() { if (isset($_GET['page']) && $_GET['page'] == 'functions.php') { $dir = get_bloginfo('template_directory'); wp_enqueue_script('adminjquery', $dir . '/includes/admin.js', false, '1.0.0', false); wp_enqueue_style('admincss', $dir . '/includes/admin.css', false, '1.0.0', 'screen'); } } add_action('admin_menu','iphoto_page'); function iphoto_page (){ if ( count($_POST) >0 &&isset($_POST['iphoto_settings']) ){ $options = array ('keywords','description','analytics','lib','views','noajax','animate','phzoom','copyright'); foreach ( $options as $opt ){ delete_option ( 'iphoto_'.$opt,$_POST[$opt] ); add_option ( 'iphoto_'.$opt,$_POST[$opt] ); } } add_theme_page('iPhoto '.__('Theme Options',THEME_NAME),__('Theme Options',THEME_NAME),'edit_themes',basename(__FILE__),'iphoto_settings'); } function iphoto_settings(){?> <div class="wrap"> <div> <h2><?php _e( 'iPhoto Theme Options<span>Version: ',THEME_NAME);?><?php $theme_data=get_theme_data(TEMPLATEPATH . '/style.css'); echo $theme_data['Version'];?></span></h2> </div> <div class="clear"></div> <form method="post" action=""> <div id="theme-Option"> <div id="theme-menu"> <span class="m1"><?php _e( 'jQuery Effect',THEME_NAME);?></span> <span class="m2"><?php _e( 'Relative Plugins',THEME_NAME);?></span> <span class="m3"><?php _e( 'Website Information',THEME_NAME);?></span> <span class="m4"><?php _e( 'Analytics Code',THEME_NAME);?></span> <span class="m5"><?php _e( 'Footer Copyright',THEME_NAME);?></span> <span class="m6"><?php _e( 'iPhoto Theme Declare',THEME_NAME);?></span> <div class="clear"></div> </div> <div id="theme-content"> <ul> <li> <tr><td> <em><?php _e( 'iPhoto use jquery 1.4.4 which contained in this theme, you can also use the Google one instead.',THEME_NAME);?></em><br/> <label><input name="lib" type="checkbox" id="lib" value="1" <?php if (get_option('iphoto_lib')!='') echo 'checked="checked"' ;?>/><?php _e( 'Load the jQuery Library supported by Google',THEME_NAME);?></label><br/><br/> </td></tr> <tr><td> <em><?php _e( 'Index page infinite loading posts.',THEME_NAME);?></em><br/> <label><input name="noajax" type="checkbox" id="noajax" value="1" <?php if (get_option('iphoto_noajax')!='') echo 'checked="checked"' ;?>/><?php _e( 'Deactivate the Infinite loading posts',THEME_NAME);?></label><br/><br/> </td></tr> <tr><td> <em><?php _e( '<strong>Animation of relayout elements</strong>',THEME_NAME);?></em><br /> <input name="animate" type="checkbox" id="animate" value="1" <?php if (get_option('iphoto_animate')!='') echo 'checked="checked"';?>/><?php _e( 'Deactivate animation effect on index page',THEME_NAME);?> </td></tr> </li> <li> <tr><td> <em><?php _e( 'WP-PostViews, Enables you to display how many times a post/page had been viewed.',THEME_NAME);?></em><br/> <label><input name="views" type="checkbox" id="views" value="1" <?php if (get_option('iphoto_views')!='') echo 'checked="checked"' ?>/><?php _e( 'Activate WP-PostViews',THEME_NAME);?></label><br/><br/> </td></tr> </li> <li> <tr><td> <?php _e( '<em>Keywords, separate by English commas. like MuFeng, Computer, Software</em>',THEME_NAME);?><br/> <textarea name="keywords" id="keywords" rows="1" cols="70" style="font-size:11px;width:100%;"><?php echo get_option('iphoto_keywords');?></textarea><br/> </td></tr> <tr><td> <?php _e( '<em>Description, explain what\'s this site about. like MuFeng, Breathing the wind</em>',THEME_NAME);?><br/> <textarea name="description" id="description" rows="3" cols="70" style="font-size:11px;width:100%;"><?php echo get_option('iphoto_description');?></textarea> </td></tr> </li> <li> <tr><td> <?php _e( 'You can get your Google Analytics code <a target="_blank" href="https://www.google.com/analytics/settings/check_status_profile_handler">here</a>.',THEME_NAME);?></label><br> <textarea name="analytics" id="analytics" rows="5" cols="70" style="font-size:11px;width:100%;"><?php echo stripslashes(get_option('iphoto_analytics'));?></textarea> </td></tr> </li> <li> <tr><td> <textarea name="copyright" id="copyright" rows="5" cols="70" style="font-size:11px;width:100%;"><?php if(stripslashes(get_option('iphoto_copyright'))!=''){echo stripslashes(get_option('iphoto_copyright'));}else{echo 'Copyright © '.date('Y').' '.'<a href="'.home_url( '/').'" title="'.esc_attr( get_bloginfo( 'name') ).'">'.esc_attr( get_bloginfo( 'name') ).'</a> All rights reserved'; };?></textarea> <br/><em><?php _e( '<b>Preview</b>',THEME_NAME);?><span> : </span><span><?php if(stripslashes(get_option('iphoto_copyright'))!=''){echo stripslashes(get_option('iphoto_copyright'));}else{echo 'Copyright © '.date('Y').' '.'<a href="'.home_url( '/').'" title="'.esc_attr( get_bloginfo( 'name') ).'">'.esc_attr( get_bloginfo( 'name') ).'</a> All rights reserved'; };?></span></em> </td></tr> </li> <li> <tr><td> <p><?php _e('iPhoto is created, developed and maintained by <a href="http://mufeng.me/">MuFeng</a>. If you like iPhoto, please donate. It will help in developing new features and versions.',THEME_NAME);?><?php _e('Alipay',THEME_NAME);?>:</strong> <a href="http://www.alipay.com" target="_blank" title="Alipay">[email protected]</a></p> <h3 style="color:#333" id="introduce"><?php _e( 'Introduction',THEME_NAME);?></h3> <p style="text-indent: 2em;margin:10px 0;"><?php _e( 'iPhoto is evolved from one theme of Tumblr and turned it into a photo theme which can be used at wordpress.',THEME_NAME);?></p> <h3 style="color:#333"><?php _e( 'Published Address',THEME_NAME);?></h3> <p id="release" style="text-indent: 2em;margin:10px 0;"><a href="http://mufeng.me/wordpress-theme-iphoto.html" target="_blank">http://mufeng.me/wordpress-theme-iphoto.html</a></p> <h3 style="color:#333"><?php _e( 'Preview Address',THEME_NAME);?></h3> <p id="preview" style="text-indent: 2em;margin:10px 0;"><a href="http://mufeng.me/photo/" target="_blank">http://mufeng.me/photo/</a></p> <h3 style="color:#333" id="bug"><?php _e( 'Report Bugs',THEME_NAME);?></h3> <p style="text-indent: 2em;margin:10px 0;"><?php _e( 'Weibo <a href="http://weibo.com/meapo" target="_blank">@mufeng.me</a> or leave a message at <a href="http://mufeng.me" target="_blank">http://mufeng.me</a>?',THEME_NAME);?></p> </td></tr> </li> </ul> </div> </div> <p class="submit"> <input type="submit" name="Submit" class="button-primary" value="<?php _e( 'Save Options',THEME_NAME);?>" /> <input type="hidden" name="iphoto_settings" value="save" style="display:none;" /> </p> </form> </div> <?php } ?>

Read the article

Problem with NHibernate

- by Bernard Larouche

I am trying to get a list of Products that share the Category. NHibernate returns no product which is wrong. Here is my Criteria API method : public IList<Product> GetProductForCategory(string name) { return _session.CreateCriteria(typeof(Product)) .CreateCriteria("Categories") .Add(Restrictions.Eq("Name", name)) .List<Product>(); } Here is my HQL method : public IList<Product> GetProductForCategory(string name) { return _session.CreateQuery("select from Product p, p.Categories.elements c where c.Name = :name").SetString("name",name).List<Product>(); } Both methods return no product when they should return 2 products. Here is the Mapping for the Product class : <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" assembly="CBL.CoderForTraders.DomainModel" namespace="CBL.CoderForTraders.DomainModel"> <class name="Product" table="Products" > <id name="_persistenceId" column="ProductId" type="Guid" access="field" unsaved-value="00000000-0000-0000-0000-000000000000"> <generator class="assigned" /> </id> <version name="_persistenceVersion" column="RowVersion" access="field" type="int" unsaved-value="0" /> <property name="Name" column="ProductName" type="String" not-null="true"/> <property name="Price" column="BasePrice" type="Decimal" not-null="true" /> <property name="IsTaxable" column="IsTaxable" type="Boolean" not-null="true" /> <property name="DefaultImage" column="DefaultImageFile" type="String"/> <bag name="Descriptors" table="ProductDescriptors"> <key column="ProductId" foreign-key="FK_Product_Descriptors"/> <one-to-many class="Descriptor"/> </bag> <bag name="Categories" table="Categories_Products" > <key column="ProductId" foreign-key="FK_Products_Categories"/> <many-to-many class="Category" column="CategoryId"></many-to-many> </bag> <bag name="Orders" generic="true" table="OrderProduct" > <key column="ProductId" foreign-key="FK_Products_Orders"/> <many-to-many column="OrderId" class="Order" /> </bag> </class> </hibernate-mapping> And finally the mapping for the Category class : <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" assembly="CBL.CoderForTraders.DomainModel" namespace="CBL.CoderForTraders.DomainModel" default-access="field.camelcase-underscore" default-lazy="true"> <class name="Category" table="Categories" > <id name="_persistenceId" column="CategoryId" type="Guid" access="field" unsaved-value="00000000-0000-0000-0000-000000000000"> <generator class="assigned" /> </id> <version name="_persistenceVersion" column="RowVersion" access="field" type="int" unsaved-value="0" /> <property name="Name" column="Name" type="String" not-null="true"/> <property name="IsDefault" column="IsDefault" type="Boolean" not-null="true" /> <property name="Description" column="Description" type="String" not-null="true" /> <many-to-one name="Parent" column="ParentID"></many-to-one> <bag name="SubCategories" inverse="true"> <key column="ParentID" foreign-key="FK_Category_ParentCategory" /> <one-to-many class="Category"/> </bag> <bag name="Products" table="Categories_Products"> <key column="CategoryId" foreign-key="FK_Categories_Products" /> <many-to-many column="ProductId" class="Product"></many-to-many> </bag> </class> </hibernate-mapping> Can you see what could be the problem ?

Read the article

GRUB is not Booting Correctly

- by msknapp

I have a PC with three hard disks. Windows 7 is installed on the first, Ubuntu 14.04 is installed on the third. After I re-booted, it went straight to Windows 7. So I tried explicitly telling my PC to boot using the third hard disk, but that just takes me to the grub rescue prompt. I followed Scott Severence's instructions here to try and recover. Essentially, I updated grub, reinstalled grub, and then updated it again. After re-booting, absolutely nothing had changed. So instead I tried using the boot-repair tool. In the past it had failed for me, saying that I had programs running and it could not unmount drives, when I was running nothing. I never figured out how to solve that problem, but it went away when I bought another hard drive and used that for my Ubuntu installation, I don't know why. In any case, I ran the boot-repair tool and this time it said it was successful. First time for everything right? I re-booted, only to be taken straight to the grub rescue prompt. So I changed my BIOS settings to use the third hard disk for boot start up. That is the same hard drive where I have Ubuntu and grub installed, and the same one that the grub-repair tool told me to use. It still took me straight to the grub rescue prompt. So I went from not being able to boot Ubuntu, to not being able to boot either OS installed on my system. Thanks boot-repair! Boot repair gave me this URL for future troubleshooting: http://paste.ubuntu.com/8131669 When I try to boot from the third hard disk, this is my console: Loading Operating System ... error: attempt to read or write outside of disk 'hd0'. Entering rescue mode... grub rescue> grub rescue> set cmdpath=(hd0) prefix=(hd0,gpt2)/boot/grub root=hd0,gpt2 grub rescue> ls (hd0) (hd0,gpt3) (hd0,gpt2) (hd0,gpt1) (hd1) (hd2) (hd2,gpt2) (hd2,gpt1) (hd3) Those values look correct to me. I have also experimented with changing some of those values, but 'insmod normal' always throws the same error. Somebody please tell me how to fix this. I have tried everything, reinstalling grub, and running boot-repair. =========================== Update: I think the problem might be that the ubuntu installer did not partition my hard disk correctly. I booted from live USB and then launched gparted and looked at how it partitioned things. This is what gparted says: Partition, File System, Size, Used, Unused, Flags /dev/sda1 (!), unknown, 1.00 MiB, ---, ---, bios_grub /dev/sda2, ext4, 2.71 TiB, 47.30 GiB, 2.67 TiB, /dev/sda3, linux-swap, 16.00 GiB, 0.00 B, 16.00 GiB, So that first line looks problematic. It is supposed to be the /boot partition. However, it was given only 1 MiB? I am assuming that MiB is actually supposed to mean megabyte, no idea why that 'i' is there. It also says the file system is unknown. I read the answer by andrew here, and he says he had to do a custom install, explicitly configuring the boot partition. So I think that maybe Ubuntu's installer has a bug in it, where it does not set up the boot partition correctly if you are not installing on the first hard disk in your computer. I am going to try reinstalling with a custom partition scheme. I read elsewhere (askubuntu won't let me post another link) that I don't even need a /boot partition any more. So instead of following Andrew's instructions ver batim, I'm first going to try having just two partitions: one for /, and another for my 16GB swap space. Both as primary partitions. The first will be formatted as ext4. If that doesn't work, I may try again using /boot. ======================== So I did my custom install with no /boot partition, and it did not work. When I rebooted, I had an error message saying that some address did not exist. So for the hundredth time, I booted from the live USB, and ran boot-repair. Now I get this message GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. I feel like I'm running in circles and nobody will help me.

Read the article

Suggestions on how to map from Domain (ORM) objects to Data Transfer Objects (DTO)

- by FryHard

The current system that I am working on makes use of Castle Activerecord to provide ORM (Object Relational Mapping) between the Domain objects and the database. This is all well and good and at most times actually works well! The problem comes about with Castle Activerecords support for asynchronous execution, well, more specifically the SessionScope that manages the session that objects belong to. Long story short, bad stuff happens! We are therefore looking for a way to easily convert (think automagically) from the Domain objects (who know that a DB exists and care) to the DTO object (who know nothing about the DB and care not for sessions, mapping attributes or all thing ORM). Does anyone have suggestions on doing this. For the start I am looking for a basic One to One mapping of object. Domain object Person will be mapped to say PersonDTO. I do not want to do this manually since it is a waste. Obviously reflection comes to mind, but I am hoping with some of the better IT knowledge floating around this site that "cooler" will be suggested. Oh, I am working in C#, the ORM objects as said before a mapped with Castle ActiveRecord. Example code: By @ajmastrean's request I have linked to an example that I have (badly) mocked together. The example has a capture form, capture form controller, domain objects, activerecord repository and an async helper. It is slightly big (3MB) because I included the ActiveRecored dll's needed to get it running. You will need to create a database called ActiveRecordAsync on your local machine or just change the .config file. Basic details of example: The Capture Form The capture form has a reference to the contoller private CompanyCaptureController MyController { get; set; } On initialise of the form it calls MyController.Load() private void InitForm () { MyController = new CompanyCaptureController(this); MyController.Load(); } This will return back to a method called LoadComplete() public void LoadCompleted (Company loadCompany) { _context.Post(delegate { CurrentItem = loadCompany; bindingSource.DataSource = CurrentItem; bindingSource.ResetCurrentItem(); //TOTO: This line will thow the exception since the session scope used to fetch loadCompany is now gone. grdEmployees.DataSource = loadCompany.Employees; }, null); } } this is where the "bad stuff" occurs, since we are using the child list of Company that is set as Lazy load. The Controller The controller has a Load method that was called from the form, it then calls the Asyc helper to asynchronously call the LoadCompany method and then return to the Capture form's LoadComplete method. public void Load () { new AsyncListLoad<Company>().BeginLoad(LoadCompany, Form.LoadCompleted); } The LoadCompany() method simply makes use of the Repository to find a know company. public Company LoadCompany() { return ActiveRecordRepository<Company>.Find(Setup.company.Identifier); } The rest of the example is rather generic, it has two domain classes which inherit from a base class, a setup file to instert some data and the repository to provide the ActiveRecordMediator abilities.

Read the article

Migrating R Scripts from Development to Production

- by Mark Hornick

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 “How do I move my R scripts stored in one database instance to another? I have my development/test system and want to migrate to production.” Users of Oracle R Enterprise Embedded R Execution will often store their R scripts in the R Script Repository in Oracle Database, especially when using the ORE SQL API. From previous blog posts, you may recall that Embedded R Execution enables running R scripts managed by Oracle Database using both R and SQL interfaces. In ORE 1.3.1., the SQL API requires scripts to be stored in the database and referenced by name in SQL queries. The SQL API enables seamless integration with database-based applications and ease of production deployment. Loading R scripts in the repository Before talking about migration, we’ll first introduce how users store R scripts in Oracle Database. Users can add R scripts to the repository in R using the function ore.scriptCreate, or SQL using the function sys.rqScriptCreate. For the sample R script id <- 1:10 plot(1:100,rnorm(100),pch=21,bg="red",cex =2) data.frame(id=id, val=id / 100) users wrap this in a function and store it in the R Script Repository with a name. In R, this looks like ore.scriptCreate("RandomRedDots", function () { line-height: 115%; font-family: "Courier New";"> id <- 1:10 plot(1:100,rnorm(100),pch=21,bg="red",cex =2) data.frame(id=id, val=id / 100)) }) In SQL, this looks like begin sys.rqScriptCreate('RandomRedDots', 'function(){ id <- 1:10 plot(1:100,rnorm(100),pch=21,bg="red",cex =2) data.frame(id=id, val=id / 100) }'); end; / The R function ore.scriptDrop and SQL function sys.rqScriptDrop can be used to drop these scripts as well. Note that the system will give an error if the script name already exists. Accessing R scripts once they’ve been loaded If you’re not using a source code control system, it is possible that your R scripts can be misplaced or files modified, making what is stored in Oracle Database to only or best copy of your R code. If you’ve loaded your R scripts to the database, it is straightforward to access these scripts from the database table SYS.RQ_SCRIPTS. For example, select * from sys.rq_scripts where name='myScriptName'; From R, scripts in the repository can be loaded into the R client engine using a function similar to the following: ore.scriptLoad <- function(name) { query <- paste("select script from sys.rq_scripts where name='",name,"'",sep="") str.f <- OREbase:::.ore.dbGetQuery(query) assign(name,eval(parse(text = str.f)),pos=1) } ore.scriptLoad("myFunctionName") This function is also useful if you want to load an existing R script from the repository into another R script in the repository – think modular coding style. Just include this function in the body of the other function and load the named script. Migrating R scripts from one database instance to another To move a set of functions from one system to another, the following script loads the functions from one R script repository into the client R engine, then connects to the target database and creates the scripts there with the same names. scriptNames <- OREbase:::.ore.dbGetQuery("select name from sys.rq_scripts where name not like 'RQG$%' and name not like 'RQ$%'")$NAME for(s in scriptNames) { cat(s,"\n") ore.scriptLoad(s) } ore.disconnect() ore.connect("rquser","orcl","localhost","rquser") for(s in scriptNames) { cat(s,"\n") ore.scriptDrop(s) ore.scriptCreate(s,get(s)) } Best Practice When naming R scripts, keep in mind that the name can be up to 128 characters. As such, consider organizing scripts in a directory structure manner. For example, if an organization has multiple groups or applications sharing the same database and there are multiple components, use “/” to facilitate the function organization: line-height: 115%;">ore.scriptCreate("/org1/app1/component1/myFuntion1", myFunction1) ore.scriptCreate("/org1/app1/component1/myFuntion2", myFunction2) ore.scriptCreate("/org1/app2/component2/myFuntion2", myFunction2) ore.scriptCreate("/org2/app2/component1/myFuntion3", myFunction3) ore.scriptCreate("/org3/app2/component1/myFuntion4", myFunction4) Users can then query for all functions using the path prefix when looking up functions. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

LINQ to Twitter Maintenance Feedback

- by Joe Mayo

Originally posted on: http://geekswithblogs.net/WinAZ/archive/2013/06/16/linq-to-twitter-maintenance-feedback.aspxIt’s always fun to receive positive feedback on your work. If you receive a sufficient amount of positive feedback, you know you’re doing something right. Sometimes, people provide negative feedback too. There are a couple ways to handle it: come back fighting or engage for clarification. The way you handle the negative feedback depends on what your goals are. Feedback Approaches If you know the feedback is incorrect and you need to promote your idea or product, you might want to come back fighting. The feedback might just be comments by a troll or competitor wanting to spread FUD. However, this could be the totally wrong approach if you misjudge the source and intentions of the feedback. In a lot of cases, feedback is a golden opportunity. Sometimes, a problem exists that you either don’t know about or don’t realize the true impact of the problem. If you decide to come back fighting, you might loose the opportunity to learn something new. However, if you engage the person providing the feedback, looking for clarification, you might learn something very important. Negative feedback and it’s clarification can lead to the collection of useful and actionable data. In my case, something that prompted this blog post, I noticed someone who tweeted a negative comment about LINQ to Twitter. Normally, any less than stellar comments are usually from folks that need help – so I help if I can. This was different. I was like “Don’t use LINQ to Twitter”. This is an open source project, the comment didn’t come from a competing project, and sounded more like an expression of frustration. So I engaged. Not only did the person respond, but I got some decent quality feedback. What’s also interesting is a couple other side conversations sprouted on the subject, which gave me more useful data. LINQ to Twitter Thread Actions Essentially, this particular issue centered around maintenance. There are actually several sub-issues at play here: dependencies, error handling, debugging, and visibility. I’ll describe each one and my interpretation. Dependencies Dependencies are where a library has references to other libraries. This means that when you build your application, you need DLLs for the entire dependency graph for your application. There are several potential problems with this that include more libraries for configuration management, potential versioning mismatches, and lack of cross-platform support. In the early days of LINQ to Twitter, I allowed developers to contribute and add dependencies, but it became very problematic (for reasons stated). It was like a ball and chain that kept me from moving forward. So, I refactored and pulled other open-source into my project to eliminate external dependencies. This lets me fix the code in my project without relying on someone else to upgrade or fix their DLL. The motivation for this was from early negative feedback that translated as important data and acted on it. Today, LINQ to Twitter has zero dependencies. Note: Rejecting good code from community members who worked hard to make your project better is a painful experience in itself. I have to point out that any contribution was not in vain because they had a positive influence on my subsequent refactoring that resulted in a better developer experience. Error Handling Error handling has been a problem in the past. I have this combination of supporting both synchronous and asynchronous (APM) processing that can be complex at times. Within the last 6 months, I did a fair amount of refactoring to detect errors and process them properly. I also refactored TwitterQueryException so it includes important data from Twitter. During this refactoring, I’ve made breaking changes that I felt would improve the development experience (small things like renaming a callback property to Exception, rather than Error). I think the async error handling is much better than it was a year ago. For all the work I’ve done, there is more to do. I think that a combination of more error handling support, e.g. improving semantics, and education through documentation and samples will improve the error handling story. Because of what I’ve done so far, it isn’t bad, but I see opportunities for improvement. Debugging Debugging can be painful. Here’s why: you have multiple layers of technology to navigate and figure out where the real problem is – Twitter API, Security, HTTP, LINQ to Twitter, and application. You can probably add your own nuances to that list, but the point is that debugging in this environment can be complex. I think that my plans for error handling will contribute to making the debugging process easier. However, there’s more I can do in the way of documentation and guidance. Some of the questions to be answered revolve around when something goes wrong, how does the developer figure out that there is a problem, what the problem is, and what to do about it. One example that has gone a long way to helping LINQ to Twitter developers is the 401 FAQ. A 401 Unauthorized is the error that the Twitter API returns when a use isn’t able to authenticate and is one of the most difficult problems faced by LINQ to Twitter developers. What I did was read guidance from Twitter and collect techniques from my own development and actions helping other developers to compile an extensive list of reasons for the 401 and ways to fix the problem. At one time, over half of the questions I answered in the forums were to help solve 401 issues. After publishing the 401 FAQ, I rarely get a 401 question and it’s because the person didn’t know about the FAQ. If the person is too lazy to read the FAQ, that’s not my issue, but the results in support issues have been dramatic. I think debugging can benefit from the education and documentation approach, but I’m always open to suggestions on whatever else I can do. Visibility Visibility is a nuance of the error handling/debugging discussion but is deeply rooted in comfort and control. The questions to ask in this area are what is happening as my code runs and how testable is the code. In support of these areas, LINQ to Twitter does have logging and TwitterContext properties that help see what’s happening on requests. The logging functionality allows any developer to connect a TextWriter to the Log property of TwitterContext to see what’s happening. Further, TwitterContext has a Headers property to see the headers Twitter returns and a RawResults property to show the Json string Twitter returns. From a testing perspective, I’ve been able to write hundreds of unit tests, over 600 when this post is published, and growing. If you write your own library, you have full control over all of these aspects. The tradeoff here is that while you have access to the LINQ to Twitter source code and modify it for all the visibility, LINQ to Twitter *will* change (which is good) and you will have to figure out how to merge that with your changes (which is hard). The fact is that this is a limitation of any 3rd party library, not just LINQ to Twitter. So, it’s a design decision where the tradeoff is between control and productivity. That said, there are things I can do with LINQ to Twitter to make the visibility story more compelling. I think there are opportunities to improve diagnostics. This would be a ton of work because it would need to provide multi-level logging that can be tuned for production and support any logging provider you want to attach. I’ve considered approaches such as how the new Semantic Logging application block connects to Windows Error Reporting as a potential target. Whatever I do would need to be extensible without creating native external dependencies. e.g. how many 3rd party libraries force a dependency on a logging framework that you don’t use. So, this won’t be an easy feat, but I believe it can be part of the roadmap. I think that a lot of developers are unaware of existing visibility features, so the first step would be to provide more documentation and guidance. My thought are that this would lead to more feedback that will help improve this area. Summary Recent feedback highlights some of items that are important to LINQ to Twitter developers, such as dependencies, error handling, debugging, and visibility. I know that there are maintenance issues that have been problems for LINQ to Twitter developers in the past. I’ve done a lot of work in this area, such as improving error handling, adding visibility features, and providing extensive API documentation. That said, there is more to be done to make LINQ to Twitter the best Twitter API experience available for .NET developers and I welcome anyone’s thoughts on what I’ve written here or new improvements. @JoeMayo

Read the article

How to cope with developing against a poor 3rd party API/application?

- by wsanville

I'm a web developer, and my organization has recently started to use a proprietary ASP.NET CMS for our web sites. I was excited to get started using the CMS, thinking it would bring a lot of value to our end users and be fun to work with, since my skills are a good match for the types of projects we're using it for. That was about a year ago. Since then, we've ran into all kinds of issues, from blatant bugs in the product, to nasty edge cases in the APIs, to extremely poor documentation for developers. On about a weekly basis, we are forced to pursue workarounds and rewrite some of the out of the box functionality, and even find some of the basic features unusable. In many cases, since this is a closed source application (and obfuscated of course), there's nothing we can do as developers to solve these issues. So my question is, how does one attempt to develop a good application in such a scenario? The application mostly works when using the the exact out of the box behavior, or using one of the company's starter sites. However, my attempts to use the underlying APIs to implement slightly different, yet reasonable behavior has proved to be extremely time consuming (not to mention just as buggy), given the lack of good information about the APIs. I've given this a lot of thought, and my conflicting viewpoints are the following: Strongly advise against any customization to the CMS, as development time will rise exponentially, or even have an extremely high chance of failing. While this is accurate, I do not want to give the impression that I am not willing to code my own solutions to problems and take the initiative to implement something difficult or complex. I don't want to be perceived as someone who is not motivated, lazy, or not knowledgeable to do anything complex, because this is simply not the case. I love coding my own solutions, trying new/difficult things, I just dislike the vendor app we're using. Continue on the path I'm on now, which is hacking my way past all issues I encounter and try my best to deliver an application that meets the needs and specs exactly. My goals are to make it as seamless and easy to use as possible to the end user, even when integrating the CMS with our other applications internally. The problem I'm finding with this approach is it is very time consuming. I open support cases with the vendor on a regular basis to solve issues and to gain knowledge of their APIs, but this is extremely time consuming, and in some cases it leads to dead ends. I post on the vendors forums on a regular basis but have become frustrated as most of my posts get 0 replies. So, what would you, a reasonable developer, do in this case? How can I make the best of the situation? And just for fun, here are some of the code smells and anti-patterns I've dealt with using the product (aside from their own code blatantly failing): Use of StringBuilder to concatenate a giant string that is hard coded and does not change. They use it to concatenate their Javascript and write it out into the body tags of their pages. Methods that accept object or Microsoft.VisualBasic.Collection as the parameters. In the case of the VB Collection, the data is not a list of any kind, it's used instead of making a class. Methods that return a Hashtable of VB Collections Method names of the form MethodName_v45, MethodName_v20, etc... Multiple classes with the same name in different namespaces with different functionality/behavior. Intellisense that reads "Note: this parameter is non functional" Complete lack of coding standards, API is filled with magic numbers and magic strings. Properties with a getter of type object that accepts totally different things, like enum or strings, and throw exceptions at runtime when you pass in something not supported. And much, much, more...

Read the article

Hibernate: update on parent-child relationship causes duplicate children

- by TimmyJ

I have a parent child relationship in which the parent has a collection of children (a set to be specific). The child collection is setup with cascade="all-delete-orphan". When I initially save the parent element everything works as expected. However, when I update the parent and save again, all the children are re-saved. This behavior leads me to believe that the parent is losing its reference to the collection of children, and therefore when persisting all the children are re-saved. It seems the only way to fix this is to not use the setter method of this child collection, but unfortunately this setter is called implicitly in my application (Spring MVC is used to bind a multi-select form element to this collection, and the setter is called by spring on the form submission). Overwriting this setter to not lose the reference (ie, do a colleciton.clear() and collection.addAll(newCollection) rather than collection = newCollection) is apparently a hibernate no-no, as is pointed out here: https://forum.hibernate.org/viewtopic.php?t=956859 Does anyone know how to circumvent this problem? I've posted some of my code below. The parent hibernate configuration: <hibernate-mapping package="org.fstrf.masterpk.domain"> <class name="ReportCriteriaBean" table="masterPkReportCriteria"> <id name="id" column="id"> <generator class="org.hibernate.id.IncrementGenerator" /> </id> <set name="treatmentArms" table="masterPkTreatmentArms" sort="org.fstrf.masterpk.domain.RxCodeComparator" lazy="false" cascade="all-delete-orphan" inverse="true"> <key column="runid"/> <one-to-many class="TreatmentArm"/> </set> </class> </hibernate-mapping> The parent object: public class ReportCriteriaBean{ private Integer id; private Set<TreatmentArm> treatmentArms; public Integer getId() { return id; } public void setId(Integer id) { this.id = id; } public Set<TreatmentArm> getTreatmentArms() { return treatmentArms; } public void setTreatmentArms(Set<TreatmentArm> treatmentArms) { this.treatmentArms = treatmentArms; if(this.treatmentArms != null){ for(TreatmentArm treatmentArm : this.treatmentArms){ treatmentArm.setReportCriteriaBean(this); } } } The child hibernate configuration: <hibernate-mapping package="org.fstrf.masterpk.domain"> <class name="TreatmentArm" table="masterPkTreatmentArms"> <id name="id" column="id"> <generator class="org.hibernate.id.IncrementGenerator" /> </id> <many-to-one name="reportCriteriaBean" class="ReportCriteriaBean" column="runId" not-null="true" /> <property name="rxCode" column="rxCode" not-null="true"/> </class> </hibernate-mapping> The child object: public class TreatmentArm { private Integer id; private ReportCriteriaBean reportCriteriaBean; private String rxCode; public Integer getId() { return id; } public void setId(Integer id) { this.id = id; } public ReportCriteriaBean getReportCriteriaBean() { return reportCriteriaBean; } public void setReportCriteriaBean(ReportCriteriaBean reportCriteriaBean) { this.reportCriteriaBean = reportCriteriaBean; } public String getRxCode() { return rxCode; } public void setRxCode(String rxCode) { this.rxCode = rxCode; } }

Read the article

@OneToMany association joining on the wrong field

- by april26

I have 2 tables, devices which contains a list of devices and dev_tags, which contains a list of asset tags for these devices. The tables join on dev_serial_num, which is the primary key of neither table. The devices are unique on their ip_address field and they have a primary key identified by dev_id. The devices "age out" after 2 weeks. Therefore, the same piece of hardware can show up more than once in devices. I mention that to explain why there is a OneToMany relationship between dev_tags and devices where it seems that this should be a OneToOne relationship. So I have my 2 entities @Entity @Table(name = "dev_tags") public class DevTags implements Serializable { private Integer tagId; private String devTagId; private String devSerialNum; private List<Devices> devices; @Id @GeneratedValue @Column(name = "tag_id") public Integer getTagId() { return tagId; } public void setTagId(Integer tagId) { this.tagId = tagId; } @Column(name="dev_tag_id") public String getDevTagId() { return devTagId; } public void setDevTagId(String devTagId) { this.devTagId = devTagId; } @Column(name="dev_serial_num") public String getDevSerialNum() { return devSerialNum; } public void setDevSerialNum(String devSerialNum) { this.devSerialNum = devSerialNum; } @OneToMany(mappedBy="devSerialNum") public List<Devices> getDevices() { return devices; } public void setDevices(List<Devices> devices) { this.devices = devices; } } and this one public class Devices implements java.io.Serializable { private Integer devId; private Integer officeId; private String devSerialNum; private String devPlatform; private String devName; private OfficeView officeView; private DevTags devTag; public Devices() { } @Id @GeneratedValue(strategy = IDENTITY) @Column(name = "dev_id", unique = true, nullable = false) public Integer getDevId() { return this.devId; } public void setDevId(Integer devId) { this.devId = devId; } @Column(name = "office_id", nullable = false, insertable=false, updatable=false) public Integer getOfficeId() { return this.officeId; } public void setOfficeId(Integer officeId) { this.officeId = officeId; } @Column(name = "dev_serial_num", nullable = false, length = 64, insertable=false, updatable=false) @NotNull @Length(max = 64) public String getDevSerialNum() { return this.devSerialNum; } public void setDevSerialNum(String devSerialNum) { this.devSerialNum = devSerialNum; } @Column(name = "dev_platform", nullable = false, length = 64) @NotNull @Length(max = 64) public String getDevPlatform() { return this.devPlatform; } public void setDevPlatform(String devPlatform) { this.devPlatform = devPlatform; } @Column(name = "dev_name") public String getDevName() { return devName; } public void setDevName(String devName) { this.devName = devName; } @ManyToOne(fetch = FetchType.LAZY) @JoinColumn(name = "office_id") public OfficeView getOfficeView() { return officeView; } public void setOfficeView(OfficeView officeView) { this.officeView = officeView; } @ManyToOne() @JoinColumn(name="dev_serial_num") public DevTags getDevTag() { return devTag; } public void setDevTag(DevTags devTag) { this.devTag = devTag; } } I messed around a lot with @JoinColumn(name=) and the mappedBy attribute of @OneToMany and I just cannot get this right. I finally got the darn thing to compile, but the query is still trying to join devices.dev_serial_num to dev_tags.tag_id, the @Id for this entity. Here is the transcript from the console: 13:12:16,970 INFO [STDOUT] Hibernate: select devices0_.office_id as office5_2_, devices0_.dev_id as dev1_2_, devices0_.dev_id as dev1_156_1_, devices0_.dev_name as dev2_156_1_, devices0_.dev_platform as dev3_156_1_, devices0_.dev_serial_num as dev4_156_1_, devices0_.office_id as office5_156_1_, devtags1_.tag_id as tag1_157_0_, devtags1_.comment as comment157_0_, devtags1_.dev_serial_num as dev3_157_0_, devtags1_.dev_tag_id as dev4_157_0_ from ond.devices devices0_ left outer join ond.dev_tags devtags1_ on devices0_.dev_serial_num=devtags1_.tag_id where devices0_.office_id=? 13:12:16,970 INFO [IntegerType] could not read column value from result set: dev4_156_1_; Invalid value for getInt() - 'FDO1129Y2U4' 13:12:16,970 WARN [JDBCExceptionReporter] SQL Error: 0, SQLState: S1009 13:12:16,970 ERROR [JDBCExceptionReporter] Invalid value for getInt() - 'FDO1129Y2U4' That value for getInt() 'FD01129Y2U4' is a serial number, definitely not an Int! What am I missing/misunderstanding here? Can I join 2 tables on any fields I want or does at least one have to be a primary key?

Read the article

Exiting a reboot loop

- by user12617035

If you're in a situation where the system is panic'ing during boot, you can use # boot net -s to regain control of your system. In my case, I'd added some diagnostic code to a (PCI) driver (that is used to boot the root filesystem). There was a bug in the driver, and each time during boot, the bug occurred, and so caused the system to panic: ... 000000000180b950 genunix:vfs_mountroot+60 (800, 200, 0, 185d400, 1883000, 18aec00) %l0-3: 0000000000001770 0000000000000640 0000000001814000 00000000000008fc %l4-7: 0000000001833c00 00000000018b1000 0000000000000600 0000000000000200 000000000180ba10 genunix:main+98 (18141a0, 1013800, 18362c0, 18ab800, 180e000, 1814000) %l0-3: 0000000070002000 0000000000000001 000000000180c000 000000000180e000 %l4-7: 0000000000000001 0000000001074800 0000000000000060 0000000000000000 skipping system dump - no dump device configured rebooting... If you're logged in via the console, you can send a BREAK sequence in order to gain control of the firmware's (OBP's) prompt. Enter Ctrl-Shift-[ in order to get the TELNET prompt. Once telnet has control, enter this: telnet> send brk You'll be presented with OBP's prompt: ok You then enter the following in order to boot into single-user mode via the network: ok boot net -s Note that booting from the network under Solaris will implicitly cause the system to be INSTALLED with whatever software had last been configured to be installed. However, we are using boot net -s as a "handle" with which to get at the Solaris prompt. Once at that prompt, we can perform actions as root that will let us back out our buggy driver (ok... MY buggy driver :-)) ...and replace it with the original, non-buggy driver. Entering the boot command caused the following output, as well as left us at the Solaris prompt (in single-user-mode): Sun Blade 1500, No Keyboard Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.16.4, 1024 MB memory installed, Serial #53463393. Ethernet address 0:3:ba:2f:c9:61, Host ID: 832fc961. Rebooting with command: boot net -s Boot device: /pci@1f,700000/network@2 File and args: -s 1000 Mbps FDX Link up Timeout waiting for ARP/RARP packet Timeout waiting for ARP/RARP packet 4000 1000 Mbps FDX Link up Requesting Internet address for 0:3:ba:2f:c9:61 SunOS Release 5.10 Version Generic_118833-17 64-bit Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Booting to milestone "milestone/single-user:default". Configuring devices. Using RPC Bootparams for network configuration information. Attempting to configure interface bge0... Configured interface bge0 Requesting System Maintenance Mode SINGLE USER MODE # Our goal is to now move to the directory containing the buggy driver and replace it with the original driver (that we had saved away before ever loading our buggy driver! :-) However, since we booted from the network, the root filesystem ("/") is NOT mounted on one of our local disks. It is mounted on an NFS filesystem exported by our install server. To verify this, enter the following command: # mount | head -1 / on my-server:/export/install/media/s10u2/solarisdvd.s10s_u2dvd/latest/Solaris_10/Tools/Boot remote/read/write/setuid/devices/dev=4ac0001 on Wed Dec 31 16:00:00 1969 As a result, we have to create a temporary mount point and then mount the local disk onto that mount point: # mkdir /tmp/mnt # mount /dev/dsk/c0t0d0s0 /tmp/mnt Note that your system will not necessarily have had its root filesystem on "c0t0d0s0". This is something that you should also have recorded before you ever loaded your.. er... "my" buggy driver! :-) One can find the local disk mounted under the root filesystem by entering: # df -k / Filesystem kbytes used avail capacity Mounted on /dev/dsk/c0t0d0s0 76703839 4035535 71901266 6% / To continue with our example, we can now move to the directory of buggy-driver in order to replace it with the original driver. Note that /tmp/mnt is prefixed to the path of where we'd "normally" find the driver: # cd /tmp/mnt/platform/sun4u/kernel/drv/sparcv9 # ls -l pci\* -rw-r--r-- 1 root root 288504 Dec 6 15:38 pcisch -rw-r--r-- 1 root root 288504 Dec 6 15:38 pcisch.aar -rwxr-xr-x 1 root sys 211616 Jun 8 2006 pcisch.orig # cp -p pcisch.orig pcisch We can now synchronize any in-memory filesystem data structures with those on disk... and then reboot. The system will then boot correctly... as expected: # sync;sync # reboot syncing file systems... done Sun Blade 1500, No Keyboard Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.16.4, 1024 MB memory installed, Serial #xxxxxxxx. Ethernet address 0:3:ba:2f:c9:61, Host ID: yyyyyyyy. Rebooting with command: boot Boot device: /pci@1e,600000/ide@d/disk@0,0:a File and args: SunOS Release 5.10 Version Generic_118833-17 64-bit Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Hostname: my-host NIS domain name is my-campus.Central.Sun.COM my-host console login: ...so that's how it's done! Of course, the easier way is to never write a buggy-driver... but.. then.. we all "have an eraser on the end of each of our pencils"... don't we ? :-) "...thank you... and good night..."

Read the article

Stumbling Through: Visual Studio 2010 (Part III)

The last post ended with us just getting started on stumbling into text template file customization, a task that required a Visual Studio extension (Tangible T4 Editor) to even have a chance at completing. Despite the benefits of the Tangible T4 Editor, I still had a hard time putting together a solid text template that would be easy to explain. This is mostly due to the way the files allow you to mix code (encapsulated in <# #>) with straight-up text to generate. It is effective to be sure, but not very readable. Nevertheless, I will try and explain what was accomplished in my custom tt file, though the details of which are not really the point of this article (my way of saying dont criticize my crappy code, and certainly dont use it in any somewhat real application. You may become dumber just by looking at this code. You have been warned really the footnote I should put at the end of all of my blog posts). To begin with, there were two basic requirements that I needed the code generator to satisfy: Reading one to many entity framework files, and using the entities that were found to write one to many class files. Thankfully, using the Entity Object Generator as a starting point gave us an example on how to do exactly that by using the MetadataLoader and EntityFrameworkTemplateFileManager you include references to these items and use them like so: // Instantiate an entity framework file reader and file writer MetadataLoader loader = new MetadataLoader(this); EntityFrameworkTemplateFileManager fileManager = EntityFrameworkTemplateFileManager.Create(this); // Load the entity model metadata workspace MetadataWorkspace metadataWorkspace = null; bool allMetadataLoaded =loader.TryLoadAllMetadata("MFL.tt", out metadataWorkspace); EdmItemCollection ItemCollection = (EdmItemCollection)metadataWorkspace.GetItemCollection(DataSpace.CSpace); // Create an IO class to contain the 'get' methods for all entities in the model fileManager.StartNewFile("MFL.IO.gen.cs"); Next, we want to be able to loop through all of the entities found in the model, and then each property for each entity so we can generate classes and methods for each. The code for that is blissfully simple: // Iterate through each entity in the model foreach (EntityType entity in ItemCollection.GetItems<EntityType>().OrderBy(e => e.Name)) { // Iterate through each primitive property of the entity foreach (EdmProperty edmProperty in entity.Properties.Where(p => p.TypeUsage.EdmType is PrimitiveType && p.DeclaringType == entity)) { // TODO: Create properties } // Iterate through each relationship of the entity foreach (NavigationProperty navProperty in entity.NavigationProperties.Where(np => np.DeclaringType == entity)) { // TODO: Create associations } } There really isnt anything more advanced than that going on in the text template the only thing I had to blunder through was realizing that if you want the generator to interpret a line of code (such as our iterations above), you need to enclose the code in <# and #> while if you want the generator to interpret the VALUE of code, such as putting the entity name into the class name, you need to enclose the code in <#= and #> like so: public partial class <#=entity.Name#> To make a long story short, I did a lot of repetition of the above to come up with a text template that generates a class for each entity based on its properties, and a set of IO methods for each entity based on its relationships. The two work together to provide lazy-loading for hierarchical data (such getting Team.Players) so it should be pretty intuitive to use on a front-end. This text template is available here you can tweak the inputFiles array to load one or many different edmx models and generate the basic xml IO and class files, though it will probably only work correctly in the simplest of cases, like our MFL model described in the previous post. Additionally, there is no validation, logging or error handling which is something I want to handle later by stumbling through the enterprise library 5.0. The code that gets generated isnt anything special, though using the LINQ to XML feature was something very new and exciting for me I had only worked with XML in the past using the DOM or XML Reader objects along with XPath, and the LINQ to XML model is just so much more elegant and supposedly efficient (something to test later). For example, the following code was generated to create a Player object for each Player node in the XML: return from element in GetXmlData(_PlayerDataFile).Descendants("Player") select new Player { Id = int.Parse(element.Attribute("Id").Value) ,ParentName = element.Parent.Name.LocalName ,ParentId = long.Parse(element.Parent.Attribute("Id").Value) ,Name = element.Attribute("Name").Value ,PositionId = int.Parse(element.Attribute("PositionId").Value) }; It is all done in one line of code, no looping needed. Even though GetXmlData loads the entire xml file just like the old XML DOM approach would have, it is supposed to be much less resource intensive. I will definitely put that to the test after we develop a user interface for getting at this data. Speaking of the data where IS the data? Weve put together a pretty model and a bunch of code around it, but we dont have any data to speak of. We can certainly drop to our favorite XML editor and crank out some data, but if it doesnt totally match our model, it will not load correctly. To help with this, Ive built in a method to generate xml at any given layer in the hierarchy. So for us to get the closest possible thing to real data, wed need to invoke MFL.IO.GenerateTeamXML and save the results to file. Doing so should get us something that looks like this: <Team Id="0" Name="0"> <Player Id="0" Name="0" PositionId="0"> <Statistic Id="0" PassYards="0" RushYards="0" Year="0" /> </Player> </Team> Sadly, it is missing the Positions node (havent thought of a way to generate lookup xml yet) and the data itself isnt quite realistic (well, as realistic as MFL data can be anyway). Lets manually remedy that for now to give us a decent starter set of data. Note that this is TWO xml files Lookups.xml and Teams.xml: <Lookups Id=0> <Position Id="0" Name="Quarterback"/> <Position Id="1" Name="Runningback"/> </Lookups> <Teams Id=0> <Team Id="0" Name="Chicago"> <Player Id="0" Name="QB Bears" PositionId="0"> <Statistic Id="0" PassYards="4000" RushYards="120" Year="2008" /> <Statistic Id="1" PassYards="4200" RushYards="180" Year="2009" /> </Player> <Player Id="1" Name="RB Bears" PositionId="1"> <Statistic Id="2" PassYards="0" RushYards="800" Year="2007" /> <Statistic Id="3" PassYards="0" RushYards="1200" Year="2008" /> <Statistic Id="4" PassYards="3" RushYards="1450" Year="2009" /> </Player> </Team> </Teams> Ok, so we have some data, we have a way to read/write that data and we have a friendly way of representing that data. Now, what remains is the part that I have been looking forward to the most: present the data to the user and give them the ability to add/update/delete, and doing so in a way that is very intuitive (easy) from a development standpoint.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Projections.count() and Projections.countDistinct() both result in the same query

- by Kim L

EDIT: I've edited this post completely, so that the new description of my problem includes all the details and not only what I previously considered relevant. Maybe this new description will help to solve the problem I'm facing. I have two entity classes, Customer and CustomerGroup. The relation between customer and customer groups is ManyToMany. The customer groups are annotated in the following way in the Customer class. @Entity public class Customer { ... @ManyToMany(mappedBy = "customers", fetch = FetchType.LAZY) public Set<CustomerGroup> getCustomerGroups() { ... } ... public String getUuid() { return uuid; } ... } The customer reference in the customer groups class is annotated in the following way @Entity public class CustomerGroup { ... @ManyToMany public Set<Customer> getCustomers() { ... } ... public String getUuid() { return uuid; } ... } Note that both the CustomerGroup and Customer classes also have an UUID field. The UUID is a unique string (uniqueness is not forced in the datamodel, as you can see, it is handled as any other normal string). What I'm trying to do, is to fetch all customers which do not belong to any customer group OR the customer group is a "valid group". The validity of a customer group is defined with a list of valid UUIDs. I've created the following criteria query Criteria criteria = getSession().createCriteria(Customer.class); criteria.setProjection(Projections.countDistinct("uuid")); criteria = criteria.createCriteria("customerGroups", "groups", Criteria.LEFT_JOIN); List<String> uuids = getValidUUIDs(); Criterion criterion = Restrictions.isNull("groups.uuid"); if (uuids != null && uuids.size() > 0) { criterion = Restrictions.or(criterion, Restrictions.in( "groups.uuid", uuids)); } criteria.add(criterion); When executing the query, it will result in the following SQL query select count(*) as y0_ from Customer this_ left outer join CustomerGroup_Customer customergr3_ on this_.id=customergr3_.customers_id left outer join CustomerGroup groups1_ on customergr3_.customerGroups_id=groups1_.id where groups1_.uuid is null or groups1_.uuid in ( ?, ? ) The query is exactly what I wanted, but with one exception. Since a Customer can belong to multiple CustomerGroups, left joining the CustomerGroup will result in duplicated Customer objects. Hence the count(*) will give a false value, as it only counts how many results there are. I need to get the amount of unique customers and this I expected to achieve by using the Projections.countDistinct("uuid"); -projection. For some reason, as you can see, the projection will still result in a count(*) query instead of the expected count(distinct uuid). Replacing the projection countDistinct with just count("uuid") will result in the exactly same query. Am I doing something wrong or is this a bug? === "Problem" solved. Reason: PEBKAC (Problem Exists Between Keyboard And Chair). I had a branch in my code and didn't realize that the branch was executed. That branch used rowCount() instead of countDistinct().

Read the article

Different fan behaviour in my laptop after upgrade, what to do now?

- by student

After upgrading from lubuntu 13.10 to 14.04 the fan of my laptop seems to run much more often than in 13.10. When it runs, it doesn't run continously but starts and stops every second. fwts fan results in Results generated by fwts: Version V14.03.01 (2014-03-27 02:14:17). Some of this work - Copyright (c) 1999 - 2014, Intel Corp. All rights reserved. Some of this work - Copyright (c) 2010 - 2014, Canonical. This test run on 12/05/14 at 21:40:13 on host Linux einstein 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64. Command: "fwts fan". Running tests: fan. fan: Simple fan tests. -------------------------------------------------------------------------------- Test 1 of 2: Test fan status. Test how many fans there are in the system. Check for the current status of the fan(s). PASSED: Test 1, Fan cooling_device0 of type Processor has max cooling state 10 and current cooling state 0. PASSED: Test 1, Fan cooling_device1 of type Processor has max cooling state 10 and current cooling state 0. PASSED: Test 1, Fan cooling_device2 of type LCD has max cooling state 15 and current cooling state 10. Test 2 of 2: Load system, check CPU fan status. Test how many fans there are in the system. Check for the current status of the fan(s). Loading CPUs for 20 seconds to try and get fan speeds to change. Fan cooling_device0 current state did not change from value 0 while CPUs were busy. Fan cooling_device1 current state did not change from value 0 while CPUs were busy. ADVICE: Did not detect any change in the CPU related thermal cooling device states. It could be that the devices are returning static information back to the driver and/or the fan speed is automatically being controlled by firmware using System Management Mode in which case the kernel interfaces being examined may not work anyway. ================================================================================ 3 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ 3 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. Test Failure Summary ================================================================================ Critical failures: NONE High failures: NONE Medium failures: NONE Low failures: NONE Other failures: NONE Test |Pass |Fail |Abort|Warn |Skip |Info | ---------------+-----+-----+-----+-----+-----+-----+ fan | 3| | | | | | ---------------+-----+-----+-----+-----+-----+-----+ Total: | 3| 0| 0| 0| 0| 0| ---------------+-----+-----+-----+-----+-----+-----+ Here is the output of lsmod lsmod Module Size Used by i8k 14421 0 zram 18478 2 dm_crypt 23177 0 gpio_ich 13476 0 dell_wmi 12761 0 sparse_keymap 13948 1 dell_wmi snd_hda_codec_hdmi 46207 1 snd_hda_codec_idt 54645 1 rfcomm 69160 0 arc4 12608 2 dell_laptop 18168 0 bnep 19624 2 dcdbas 14928 1 dell_laptop bluetooth 395423 10 bnep,rfcomm iwldvm 232285 0 mac80211 626511 1 iwldvm snd_hda_intel 52355 3 snd_hda_codec 192906 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 102099 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30144 1 snd_seq_midi coretemp 13435 0 kvm_intel 143060 0 kvm 451511 1 kvm_intel snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi joydev 17381 0 serio_raw 13462 0 iwlwifi 169932 1 iwldvm pcmcia 62299 0 snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29482 2 snd_pcm,snd_seq lpc_ich 21080 0 cfg80211 484040 3 iwlwifi,mac80211,iwldvm yenta_socket 41027 0 pcmcia_rsrc 18407 1 yenta_socket pcmcia_core 23592 3 pcmcia,pcmcia_rsrc,yenta_socket binfmt_misc 17468 1 snd 69238 17 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi soundcore 12680 1 snd parport_pc 32701 0 mac_hid 13205 0 ppdev 17671 0 lp 17759 0 parport 42348 3 lp,ppdev,parport_pc firewire_ohci 40409 0 psmouse 102222 0 sdhci_pci 23172 0 sdhci 43015 1 sdhci_pci firewire_core 68769 1 firewire_ohci crc_itu_t 12707 1 firewire_core ahci 25819 2 libahci 32168 1 ahci i915 783485 2 wmi 19177 1 dell_wmi i2c_algo_bit 13413 1 i915 drm_kms_helper 52758 1 i915 e1000e 254433 0 drm 302817 3 i915,drm_kms_helper ptp 18933 1 e1000e pps_core 19382 1 ptp video 19476 1 i915 I tried one answer to the similar question: loud fan on Ubuntu 14.04 and created a /etc/i8kmon.conf like the following: # Run as daemon, override with --daemon option set config(daemon) 1 # Automatic fan control, override with --auto option set config(auto) 1 # Status check timeout (seconds), override with --timeout option set config(timeout) 2 # Report status on stdout, override with --verbose option set config(verbose) 1 # Temperature thresholds: {fan_speeds low_ac high_ac low_batt high_batt} set config(0) {{0 0} -1 55 -1 55} set config(1) {{0 1} 50 60 55 65} set config(2) {{1 1} 55 80 60 85} set config(3) {{2 2} 70 128 75 128} With this setup the fan goes on even if the temperature is below 50 degree celsius (I don't see a pattern). However I get the impression that the CPU got's hotter in average than without this file. What changes from 13.10 to 14.04 may be responsible for this? If this is a bug, for which package I should report the bug?

Read the article

If I were in a Silverlight focus group, here is ten things I would say.

- by mbcrump

Silverlight is a great product right off the shelf. I use it, love it and spend a lot of time helping the community understand it. This however, doesn’t mean that I don’t think that it can get better. If I were invited to a Microsoft Focus Group about Silverlight here is 10 things I would say: We need more navigation templates. I’ve found (4) templates that Microsoft has released (Cosmo, Windows 7, Accent and JetPack). This number needs to be around 16. In order to get more people developing for Silverlight, we need to give them a variety of templates to get them off the ground quickly. Silverlight needs to ship with the next version of Windows. At least version 4 needs to be pre-installed on Windows going forward. It’s small, in its own sandbox and I cannot find a reason for it not to be included. Silverlight needs to run on more platforms. iOS and Android are the key here. I think Microsoft should shoot for Android first since I believe Android will take the lead in the mobile market (at least for the short-term). It would also be great to see Microsoft use Silverlight as the focus on their new tablets / “AppleTV”. I would even invest in getting it working with Kinect. When creating a new project in Silverlight, we should have the option to create a Unit Test. Most Silverlight developers are not unit testing. If this is surprising to you then you need to get out and talk to more developers. I partially blame this on Microsoft. When you create a new ASP.NET MVC application, you simply put a check to create a Unit Test project. We need the same thing for Silverlight. We should steer the developer into the right direction. Design patterns such as MVVM need to be easier to implement in Silverlight solutions. I’d go so far as to say that MVVM Light should ship with Visual Studio. With the project / item templates and code snippets, Laurent puts you into the right direction. This is the way that it should have been. Easy for the 9-5 developer to grasp. I believe the majority of developers use code behind because that’s what is in all the demos provided by Microsoft. They are not trying to write sucky code it is that they simply don’t know a better way. The XAP Files should be obfuscated/unused references deleted by default when in “Release” mode. A better Silverlight experience starts with a smaller XAP file. The less that a user has to download is the better, even with the majority of people on broadband. I would also recommend built-in obfuscation by Microsoft. People are paranoid that they can rename the .zip and run it through reflector. Get rid of the boring install experiences. Here is a great write up on what I’m talking about. The default “Install Silverlight” and “Loading screens” suck. They suck bad. We need a choice of templates that a professional designer has created. Silverlight needs to supports more image formats. For example: it would be great to use .gif’s without converting them to .png. Switching between Blend 4 and VS2010 to develop a Silverlight application is a pain. Probably one of the biggest issues that I can’t think of a good solution for. It would be nice if VS2012 had the best of both worlds and you never have to leave VS. We need reporting controls with SSRS included with the Silverlight Toolkit. I can’t think of another control that we need built into the toolkit. It would also be helpful to have export to .xls, .pdf and .doc included with the control. I hope that this post will at least get a few people talking. Who knows, Microsoft could be working on these things right now. Thanks for reading! Subscribe to my feed CodeProject

Read the article

Photo inside the image view should not go cross on dragging

- by TGMCians

I want photo inside the imageview should not go outside on dragging. In my code when i start to drag bitmap inside the imageview its goes out from imageview but i want when it cross the imageview its should come at starting point of imageview. How to achieve this. please help me for this. @Override protected void onDraw(Canvas canvas) { super.onDraw(canvas); canvas.save(); scaleCount=scaleCount+scale; angleCount = addAngle(angleCount, Math.toDegrees(angle)); Log.v("Positions", "X: "+x+" " + "Y: "+y); Log.d("ScaleCount", String.valueOf(scaleCount)); Log.d("Angle", String.valueOf(angleCount)); if (!isInitialized) { int w = getWidth(); int h = getHeight(); position.set(w / 2, h / 2); isInitialized = true; } Paint paint = new Paint(); Log.v("Height and Width", "Height: "+ getHeight() + "Width: "+ getWidth()); transform.reset(); transform.postTranslate(-width / 2.0f, -height / 2.0f); transform.postRotate((float) Math.toDegrees(angle)); transform.postScale(scale, scale); transform.postTranslate(position.getX(), position.getY()); canvas.drawBitmap(bitmap, transform, paint); canvas.restore(); BitmapWidth=BitmapWidth+bitmap.getScaledWidth(canvas); BitmapHeight=BitmapHeight+bitmap.getScaledHeight(canvas); try { /*paint.setColor(0xFF007F00); canvas.drawCircle(vca.getX(), vca.getY(), 30, paint); paint.setColor(0xFF7F0000); canvas.drawCircle(vcb.getX(), vcb.getY(), 30, paint);*/ /*paint.setColor(0xFFFF0000); canvas.drawLine(vpa.getX(), vpa.getY(), vpb.getX(), vpb.getY(), paint); paint.setColor(0xFF00FF00); canvas.drawLine(vca.getX(), vca.getY(), vcb.getX(), vcb.getY(), paint);*/ } catch(NullPointerException e) { // Just being lazy here... } } @Override public boolean onTouch(View v, MotionEvent event) { vca = null; vcb = null; vpa = null; vpb = null; x=event.getX(); y=event.getY(); try { touchManager.update(event); if (touchManager.getPressCount() == 1) { vca = touchManager.getPoint(0); vpa = touchManager.getPreviousPoint(0); position.add(touchManager.moveDelta(0)); } else { if (touchManager.getPressCount() == 2) { vca = touchManager.getPoint(0); vpa = touchManager.getPreviousPoint(0); vcb = touchManager.getPoint(1); vpb = touchManager.getPreviousPoint(1); VMVector2D current = touchManager.getVector(0, 1); VMVector2D previous = touchManager.getPreviousVector(0, 1); float currentDistance = current.getLength(); float previousDistance = previous.getLength(); if (currentDistance-previousDistance != 0) { scale *= currentDistance / previousDistance; } angle -= VMVector2D.getSignedAngleBetween(current, previous); /*angleCount=angleCount+angle;*/ } } invalidate(); } catch(Exception exception) { // Log.d("VM", exception.getMessage()); } return true; }

Read the article

Stumbling Through: Visual Studio 2010 (Part III)

The last post ended with us just getting started on stumbling into text template file customization, a task that required a Visual Studio extension (Tangible T4 Editor) to even have a chance at completing. Despite the benefits of the Tangible T4 Editor, I still had a hard time putting together a solid text template that would be easy to explain. This is mostly due to the way the files allow you to mix code (encapsulated in <# #>) with straight-up text to generate. It is effective to be sure, but not very readable. Nevertheless, I will try and explain what was accomplished in my custom tt file, though the details of which are not really the point of this article (my way of saying dont criticize my crappy code, and certainly dont use it in any somewhat real application. You may become dumber just by looking at this code. You have been warned really the footnote I should put at the end of all of my blog posts). To begin with, there were two basic requirements that I needed the code generator to satisfy: Reading one to many entity framework files, and using the entities that were found to write one to many class files. Thankfully, using the Entity Object Generator as a starting point gave us an example on how to do exactly that by using the MetadataLoader and EntityFrameworkTemplateFileManager you include references to these items and use them like so: // Instantiate an entity framework file reader and file writer MetadataLoader loader = new MetadataLoader(this); EntityFrameworkTemplateFileManager fileManager = EntityFrameworkTemplateFileManager.Create(this); // Load the entity model metadata workspace MetadataWorkspace metadataWorkspace = null; bool allMetadataLoaded =loader.TryLoadAllMetadata("MFL.tt", out metadataWorkspace); EdmItemCollection ItemCollection = (EdmItemCollection)metadataWorkspace.GetItemCollection(DataSpace.CSpace); // Create an IO class to contain the 'get' methods for all entities in the model fileManager.StartNewFile("MFL.IO.gen.cs"); Next, we want to be able to loop through all of the entities found in the model, and then each property for each entity so we can generate classes and methods for each. The code for that is blissfully simple: // Iterate through each entity in the model foreach (EntityType entity in ItemCollection.GetItems<EntityType>().OrderBy(e => e.Name)) { // Iterate through each primitive property of the entity foreach (EdmProperty edmProperty in entity.Properties.Where(p => p.TypeUsage.EdmType is PrimitiveType && p.DeclaringType == entity)) { // TODO: Create properties } // Iterate through each relationship of the entity foreach (NavigationProperty navProperty in entity.NavigationProperties.Where(np => np.DeclaringType == entity)) { // TODO: Create associations } } There really isnt anything more advanced than that going on in the text template the only thing I had to blunder through was realizing that if you want the generator to interpret a line of code (such as our iterations above), you need to enclose the code in <# and #> while if you want the generator to interpret the VALUE of code, such as putting the entity name into the class name, you need to enclose the code in <#= and #> like so: public partial class <#=entity.Name#> To make a long story short, I did a lot of repetition of the above to come up with a text template that generates a class for each entity based on its properties, and a set of IO methods for each entity based on its relationships. The two work together to provide lazy-loading for hierarchical data (such getting Team.Players) so it should be pretty intuitive to use on a front-end. This text template is available here you can tweak the inputFiles array to load one or many different edmx models and generate the basic xml IO and class files, though it will probably only work correctly in the simplest of cases, like our MFL model described in the previous post. Additionally, there is no validation, logging or error handling which is something I want to handle later by stumbling through the enterprise library 5.0. The code that gets generated isnt anything special, though using the LINQ to XML feature was something very new and exciting for me I had only worked with XML in the past using the DOM or XML Reader objects along with XPath, and the LINQ to XML model is just so much more elegant and supposedly efficient (something to test later). For example, the following code was generated to create a Player object for each Player node in the XML: return from element in GetXmlData(_PlayerDataFile).Descendants("Player") select new Player { Id = int.Parse(element.Attribute("Id").Value) ,ParentName = element.Parent.Name.LocalName ,ParentId = long.Parse(element.Parent.Attribute("Id").Value) ,Name = element.Attribute("Name").Value ,PositionId = int.Parse(element.Attribute("PositionId").Value) }; It is all done in one line of code, no looping needed. Even though GetXmlData loads the entire xml file just like the old XML DOM approach would have, it is supposed to be much less resource intensive. I will definitely put that to the test after we develop a user interface for getting at this data. Speaking of the data where IS the data? Weve put together a pretty model and a bunch of code around it, but we dont have any data to speak of. We can certainly drop to our favorite XML editor and crank out some data, but if it doesnt totally match our model, it will not load correctly. To help with this, Ive built in a method to generate xml at any given layer in the hierarchy. So for us to get the closest possible thing to real data, wed need to invoke MFL.IO.GenerateTeamXML and save the results to file. Doing so should get us something that looks like this: <Team Id="0" Name="0"> <Player Id="0" Name="0" PositionId="0"> <Statistic Id="0" PassYards="0" RushYards="0" Year="0" /> </Player> </Team> Sadly, it is missing the Positions node (havent thought of a way to generate lookup xml yet) and the data itself isnt quite realistic (well, as realistic as MFL data can be anyway). Lets manually remedy that for now to give us a decent starter set of data. Note that this is TWO xml files Lookups.xml and Teams.xml: <Lookups Id=0> <Position Id="0" Name="Quarterback"/> <Position Id="1" Name="Runningback"/> </Lookups> <Teams Id=0> <Team Id="0" Name="Chicago"> <Player Id="0" Name="QB Bears" PositionId="0"> <Statistic Id="0" PassYards="4000" RushYards="120" Year="2008" /> <Statistic Id="1" PassYards="4200" RushYards="180" Year="2009" /> </Player> <Player Id="1" Name="RB Bears" PositionId="1"> <Statistic Id="2" PassYards="0" RushYards="800" Year="2007" /> <Statistic Id="3" PassYards="0" RushYards="1200" Year="2008" /> <Statistic Id="4" PassYards="3" RushYards="1450" Year="2009" /> </Player> </Team> </Teams> Ok, so we have some data, we have a way to read/write that data and we have a friendly way of representing that data. Now, what remains is the part that I have been looking forward to the most: present the data to the user and give them the ability to add/update/delete, and doing so in a way that is very intuitive (easy) from a development standpoint.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Is there a FlashBlock plugin written in Javascript?

- by user3709489

Anyone here have one ? I mean a plugin like Click to Play of Firefox and Chrome feature ( https://www.google.com/search?q=click+to+play+firefox&hl=vi&source=lnms&tbm=isch&sa=X&ei=gOKPU5GCJsP_8QXFtYC4Aw&ved=0CAgQ_AUoAQ&biw=1366&bih=717 ) but written in Javascript, work like LazyLoad I found here: https://github.com/kaizau/Lazy-Load-Images-without-jQuery If anyone here have something like that please share me, I also found a click to show function for image: <html> <head> <title></title> </head> <body>  <script type="text/javascript">  </script> <p><img data-src="graphics/one.gif" width="400" height="600" id="Image1" onClick="MM_swapImage('Image1','','http://www.nasa.gov/sites/default/themes/NASAPortal/images/nasa-starfield-header-hr.png',0)"></p>  </body> </html> Many thank!

Read the article

"Mega Menus" for SEO [duplicate]

- by Thought Space Designs

This question already has an answer here: How do I handle having to many links on a webpage because of my menu 4 answers I'm using the term "Mega Menus" loosely here. I'm redesigning my WordPress site (it's going to be responsive), and as part of the redesign, I was debating incorporating some sort of descriptive menu setup. For example, normal navigation drop down menus come in the form of unordered lists of links like so: <nav> <ul> <li> <a href="#">Link1</a> </li> <li> <a href="#">Link2</a> </li> <li> <a href="#">Link3</a> <ul> <li> <a href="#">Sub Link1</a> </li> <li> <a href="#">Sub Link2</a> </li> <li> <a href="#">Sub Link3</a> </li> </ul> </li> <li> <a href="#">Link4</a> </li> </ul> </nav> What I'm looking to do is build my drop down menus with more information than your standard menu. For example, I have a top level link named "Team", and under that link, I want to make a large drop down that contains head shots, headers (in the form of styled p tags) and brief (<100 words) descriptions of each team member (only 2 currently). I want to accompany this with a "Read More" link that takes you to their actual team page. This is just one example, of course, and the other top level links would also have descriptive drop downs in the same fashion. On mobile, I was planning on hiding the "mega menu", and delivering a standard unordered list of links. Here's what I was thinking for overall structure and syntax: <nav> <ul> <li> <a href="#">Home</a> </li> <li> <a href="#">About</a> </li> <li> <a href="#">Team</a> <ul>  <li class="mega-menu row"> <a class="col-sm-6" href="#"> <div class="row"> <div class="col-sm-4"> <img src="#" alt="Team Member 1" /> </div> <div class="col-sm-8"> <p class="header">Team Member 1</p> <p>Short description goes here.</p> </div> </div> </a> <a class="col-sm-6" href="#">  </a> </li>   <li> <a href="#">Team Member 1</a> </li> <li> <a href="#">Team Member 2</a> </li>  </ul> </li> <li> <a href="#">Contact</a> </li> </ul> </nav> Can anybody think of any potential SEO ramifications of doing this? I'm not going to be loading these menus full of links, so it shouldn't hurt page rank, but what are the effects of having a good bit of text and maybe even forms within nav elements? Is there such a thing as overloading nav with HTML? EDIT: Here's an example of what the menu would look like rendered on desktop. I'm currently hovering the "Team" menu, but you can't see because my mouse went away when I took the screenshot. EDIT 2: This question is not a duplicate. I'm not going to have "too many" links in my menus. I'm wondering how having images and text inside of header navigation will affect my menus. Also, I don't just want "yes, this is bad" answers. Please cite your sources and be specific with reasoning.

Read the article

jQuery and Windows Azure

- by Stephen Walther

The goal of this blog entry is to describe how you can host a simple Ajax application created with jQuery in the Windows Azure cloud. In this blog entry, I make no assumptions. I assume that you have never used Windows Azure and I am going to walk through the steps required to host the application in the cloud in agonizing detail. Our application will consist of a single HTML page and a single service. The HTML page will contain jQuery code that invokes the service to retrieve and display set of records. There are five steps that you must complete to host the jQuery application: Sign up for Windows Azure Create a Hosted Service Install the Windows Azure Tools for Visual Studio Create a Windows Azure Cloud Service Deploy the Cloud Service Sign Up for Windows Azure Go to http://www.microsoft.com/windowsazure/ and click the Sign up Now button. Select one of the offers. I selected the Introductory Special offer because it is free and I just wanted to experiment with Windows Azure for the purposes of this blog entry. To sign up, you will need a Windows Live ID and you will need to enter a credit card number. After you finish the sign up process, you will receive an email that explains how to activate your account. Accessing the Developer Portal After you create your account and your account is activated, you can access the Windows Azure developer portal by visiting the following URL: http://windows.azure.com/ When you first visit the developer portal, you will see the one project that you created when you set up your Windows Azure account (In a fit of creativity, I named my project StephenWalther). Creating a New Windows Azure Hosted Service Before you can host an application in the cloud, you must first add a hosted service to your project. Click your project on the summary page and click the New Service link. You are presented with the option of creating either a new Storage Account or a new Hosted Services. Because we have code that we want to run in the cloud – the WCF Service -- we want to select the Hosted Services option. After you select this option, you must provide a name and description for your service. This information is used on the developer portal so you can distinguish your services. When you create a new hosted service, you must enter a unique name for your service (I selected jQueryApp) and you must select a region for this service (I selected Anywhere US). Click the Create button to create the new hosted service. Install the Windows Azure Tools for Visual Studio We’ll use Visual Studio to create our jQuery project. Before you can use Visual Studio with Windows Azure, you must first install the Windows Azure Tools for Visual Studio. Go to http://www.microsoft.com/windowsazure/ and click the Get Tools and SDK button. The Windows Azure Tools for Visual Studio works with both Visual Studio 2008 and Visual Studio 2010. Installation of the Windows Azure Tools for Visual Studio is painless. You just need to check some agreement checkboxes and click the Next button a few times and installation will begin: Creating a Windows Azure Application After you install the Windows Azure Tools for Visual Studio, you can choose to create a Windows Azure Cloud Service by selecting the menu option File, New Project and selecting the Windows Azure Cloud Service project template. I named my new Cloud Service with the name jQueryApp. Next, you need to select the type of Cloud Service project that you want to create from the New Cloud Service Project dialog. I selected the C# ASP.NET Web Role option. Alternatively, I could have picked the ASP.NET MVC 2 Web Role option if I wanted to use jQuery with ASP.NET MVC or even the CGI Web Role option if I wanted to use jQuery with PHP. After you complete these steps, you end up with two projects in your Visual Studio solution. The project named WebRole1 represents your ASP.NET application and we will use this project to create our jQuery application. Creating the jQuery Application in the Cloud We are now ready to create the jQuery application. We’ll create a super simple application that displays a list of records retrieved from a WCF service (hosted in the cloud). Create a new page in the WebRole1 project named Default.htm and add the following code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Products</title> <style type="text/css"> #productContainer div { border:solid 1px black; padding:5px; margin:5px; } </style> </head> <body> <h1>Product Catalog</h1> <div id="productContainer"></div> <script id="productTemplate" type="text/html"> <div> Name: {{= name }} <br /> Price: {{= price }} </div> </script> <script src="Scripts/jquery-1.4.2.js" type="text/javascript"></script> <script src="Scripts/jquery.tmpl.js" type="text/javascript"></script> <script type="text/javascript"> var products = [ {name:"Milk", price:4.55}, {name:"Yogurt", price:2.99}, {name:"Steak", price:23.44} ]; $("#productTemplate").render(products).appendTo("#productContainer"); </script> </body> </html> The jQuery code in this page simply displays a list of products by using a template. I am using a jQuery template to format each product. You can learn more about using jQuery templates by reading the following blog entry by Scott Guthrie: http://weblogs.asp.net/scottgu/archive/2010/05/07/jquery-templates-and-data-linking-and-microsoft-contributing-to-jquery.aspx You can test whether the Default.htm page is working correctly by running your application (hit the F5 key). The first time that you run your application, a database is set up on your local machine to simulate cloud storage. You will see the following dialog: If the Default.htm page works as expected, you should see the list of three products: Adding an Ajax-Enabled WCF Service In the previous section, we created a simple jQuery application that displays an array by using a template. The application is a little too simple because the data is static. In this section, we’ll modify the page so that the data is retrieved from a WCF service instead of an array. First, we need to add a new Ajax-enabled WCF Service to the WebRole1 project. Select the menu option Project, Add New Item and select the Ajax-enabled WCF Service project item. Name the new service ProductService.svc. Modify the service so that it returns a static collection of products. The final code for the ProductService.svc should look like this: using System.Collections.Generic; using System.ServiceModel; using System.ServiceModel.Activation; namespace WebRole1 { public class Product { public string name { get; set; } public decimal price { get; set; } } [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class ProductService { [OperationContract] public IList<Product> SelectProducts() { var products = new List<Product>(); products.Add(new Product {name="Milk", price=4.55m} ); products.Add(new Product { name = "Yogurt", price = 2.99m }); products.Add(new Product { name = "Steak", price = 23.44m }); return products; } } } In real life, you would want to retrieve the list of products from storage instead of a static array. We are being lazy here. Next you need to modify the Default.htm page to use the ProductService.svc. The jQuery script in the following updated Default.htm page makes an Ajax call to the WCF service. The data retrieved from the ProductService.svc is displayed in the client template. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Products</title> <style type="text/css"> #productContainer div { border:solid 1px black; padding:5px; margin:5px; } </style> </head> <body> <h1>Product Catalog</h1> <div id="productContainer"></div> <script id="productTemplate" type="text/html"> <div> Name: {{= name }} <br /> Price: {{= price }} </div> </script> <script src="Scripts/jquery-1.4.2.js" type="text/javascript"></script> <script src="Scripts/jquery.tmpl.js" type="text/javascript"></script> <script type="text/javascript"> $.post("ProductService.svc/SelectProducts", function (results) { var products = results["d"]; $("#productTemplate").render(products).appendTo("#productContainer"); }); </script> </body> </html> Deploying the jQuery Application to the Cloud Now that we have created our jQuery application, we are ready to deploy our application to the cloud so that the whole world can use it. Right-click your jQueryApp project in the Solution Explorer window and select the Publish menu option. When you select publish, your application and your application configuration information is packaged up into two files named jQueryApp.cspkg and ServiceConfiguration.cscfg. Visual Studio opens the directory that contains the two files. In order to deploy these files to the Windows Azure cloud, you must upload these files yourself. Return to the Windows Azure Developers Portal at the following address: http://windows.azure.com/ Select your project and select the jQueryApp service. You will see a mysterious cube. Click the Deploy button to upload your application. Next, you need to browse to the location on your hard drive where the jQueryApp project was published and select both the packaged application and the packaged application configuration file. Supply the deployment with a name and click the Deploy button. While your application is in the process of being deployed, you can view a progress bar. Running the jQuery Application in the Cloud Finally, you can run your jQuery application in the cloud by clicking the Run button. It might take several minutes for your application to initialize (go grab a coffee). After WebRole1 finishes initializing, you can navigate to the following URL to view your live jQuery application in the cloud: http://jqueryapp.cloudapp.net/default.htm The page is hosted on the Windows Azure cloud and the WCF service executes every time that you request the page to retrieve the list of products. Summary Because we started from scratch, we needed to complete several steps to create and deploy our jQuery application to the Windows Azure cloud. We needed to create a Windows Azure account, create a hosted service, install the Windows Azure Tools for Visual Studio, create the jQuery application, and deploy it to the cloud. Now that we have finished this process once, modifying our existing cloud application or creating a new cloud application is easy. jQuery and Windows Azure work nicely together. We can take advantage of jQuery to build applications that run in the browser and we can take advantage of Windows Azure to host the backend services required by our jQuery application. The big benefit of Windows Azure is that it enables us to scale. If, all of the sudden, our jQuery application explodes in popularity, Windows Azure enables us to easily scale up to meet the demand. We can handle anything that the Internet might throw at us.

Search Results

Search found 7801 results on 313 pages for 'lazy loading'.

Page 282/313 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289 | Next Page >

- by Valter Minute

- by Ben

- by Renso

- by Sherry LaMonica

- by nbm

- by Albert Kam

- by Zach Johnson

- by Bernard Larouche

- by msknapp

- by FryHard

- by Mark Hornick

- by Joe Mayo

- by wsanville

- by TimmyJ

- by april26

- by user12617035

- by Kim L

- by student

- by mbcrump

- by TGMCians

- by user3709489

- by Thought Space Designs

- by Stephen Walther

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289 | Next Page >