Search Results

Search found 8536 results on 342 pages for 'transport bar'.

Page 282/342 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

• Setting up VPN client: L2TP with IPsec

  - by zachar

  I've got to connect to vpn server. It works on Windows, but in Ubuntu 10.04 not. Number of options is confusing for me. There is the input that I have: IP Address of VPN Pre-shared key to authenticate Information that MS-CHAPv2 is used Login and Password to VPN I was trying to achive that with network manager and with L2TP IPsec VPN Manager 1.0.9 but at failed. There is some logged information from L2TP IPsec VPN Manager 1.0.9: Nov 09 15:21:46.854 ipsec_setup: Stopping Openswan IPsec... Nov 09 15:21:48.088 Stopping xl2tpd: xl2tpd. Nov 09 15:21:48.132 ipsec_setup: Starting Openswan IPsec U2.6.23/K2.6.32-49-generic... Nov 09 15:21:48.308 ipsec__plutorun: Starting Pluto subsystem... Nov 09 15:21:48.318 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Nov 09 15:21:48.338 ipsec__plutorun: 002 added connection description "my_vpn_name" Nov 09 15:21:48.348 ipsec__plutorun: 003 NAT-Traversal: Trying new style NAT-T Nov 09 15:21:48.348 ipsec__plutorun: 003 NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Nov 09 15:21:48.349 ipsec__plutorun: 003 NAT-Traversal: Trying old style NAT-T Nov 09 15:21:48.994 104 "my_vpn_name" #1: STATE_MAIN_I1: initiate Nov 09 15:21:48.994 003 "my_vpn_name" #1: received Vendor ID payload [RFC 3947] method set to=109 Nov 09 15:21:48.994 003 "my_vpn_name" #1: received Vendor ID payload [Dead Peer Detection] Nov 09 15:21:48.994 106 "my_vpn_name" #1: STATE_MAIN_I2: sent MI2, expecting MR2 Nov 09 15:21:48.994 003 "my_vpn_name" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed Nov 09 15:21:48.994 108 "my_vpn_name" #1: STATE_MAIN_I3: sent MI3, expecting MR3 Nov 09 15:21:48.994 004 "my_vpn_name" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024} Nov 09 15:21:48.995 117 "my_vpn_name" #2: STATE_QUICK_I1: initiate Nov 09 15:21:48.995 004 "my_vpn_name" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x0c96795d <0x483e1a42 xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} Nov 09 15:21:49.996 [ERROR 210] Failed to open l2tp control file 'c my_vpn_name' and from syslog: Nov 9 15:21:46 o99 L2tpIPsecVpnControlDaemon: Opening client connection Nov 9 15:21:46 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec setup stop Nov 9 15:21:46 o99 ipsec_setup: Stopping Openswan IPsec... Nov 9 15:21:48 o99 kernel: [ 4350.245171] NET: Unregistered protocol family 15 Nov 9 15:21:48 o99 ipsec_setup: ...Openswan IPsec stopped Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec setup stop finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command invoke-rc.d xl2tpd stop Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command invoke-rc.d xl2tpd stop finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Opening client connection Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Closing client connection Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec setup start Nov 9 15:21:48 o99 kernel: [ 4350.312483] NET: Registered protocol family 15 Nov 9 15:21:48 o99 ipsec_setup: Starting Openswan IPsec U2.6.23/K2.6.32-49-generic... Nov 9 15:21:48 o99 ipsec_setup: Using NETKEY(XFRM) stack Nov 9 15:21:48 o99 kernel: [ 4350.410774] Initializing XFRM netlink socket Nov 9 15:21:48 o99 kernel: [ 4350.413601] padlock: VIA PadLock not detected. Nov 9 15:21:48 o99 kernel: [ 4350.427311] padlock: VIA PadLock Hash Engine not detected. Nov 9 15:21:48 o99 kernel: [ 4350.441533] padlock: VIA PadLock not detected. Nov 9 15:21:48 o99 ipsec_setup: ...Openswan IPsec started Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec setup start finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command invoke-rc.d xl2tpd start Nov 9 15:21:48 o99 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Nov 9 15:21:48 o99 pluto: adjusting ipsec.d to /etc/ipsec.d Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command invoke-rc.d xl2tpd start finished with exit code 0 Nov 9 15:21:48 o99 ipsec__plutorun: 002 added connection description "my_vpn_name" Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec auto --ready Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: Trying new style NAT-T Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: Trying old style NAT-T Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec auto --ready finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec auto --up my_vpn_name Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec auto --up my_vpn_name finished with exit code 0 Nov 9 15:21:49 o99 L2tpIPsecVpnControlDaemon: Closing client connection Can anyone tell me something more about that? Where is the mistake?

  Read the article

• How I Work: Staying Productive Whilst Traveling

  - by BuckWoody

  I travel a lot. Not like some folks that are gone every week, mind you, although in the last month I’ve been to: Cambridge, UK; Anchorage, AK; San Jose, CA; Copenhagen, DK, Boston, MA; and I’m currently en-route to Anaheim, CA.  While this many places in a month is a bit unusual for me, I would say I travel frequently. I’ve travelled most of my 28+ years in IT, and at one time was a consultant traveling weekly.   With that much time away from my primary work location, I have to find ways to stay productive. Some might say “just rest – take a nap!” – but I’m not able to do that. For one thing, I’m a very light sleeper and I’ve never slept on a plane - even a 30+ hour trip to New Zealand in Business Class - so that just isn’t option. I also am not always in the plane, of course. There’s the hotel, the taxi/bus/train, the airport and then all that over again when I arrive. Since my regular jobs have many demands, I have to get work done.   Note: No, I’m not always focused on work. I need downtime just like everyone else. Sometimes I just think, watch a movie or listen to tunes – and I give myself permission to do that anytime – sometimes the whole trip. I have too fewheartbeats left in life to only focus on work – it’s just not that important, and neither am I. Some of these tasks are letters to friends and family, or other personal things. What I’m talking about here is a plan, not some task list I have to follow. When I get to the location I’m traveling to, I always build in as much time as I can to ensure I enjoy those sights and the people I’m with. I would find traveling to be a waste if not for that.   The Unrealistic Expectation As I would evaluate the trip I was taking – say a 6-8 hour flight – I would expect to get 10-12 hours of work done. After all, there’s the time at the airport, the taxi and so on, and then of course the time in the air with all of the room, power, internet and everything else I needed to get my work done. I would pile up tasks at home, pack my bags, and head happily to the magical land of the TSA.   Right. On return from the trip, I had accomplished little, had more e-mails and other work that had piled up, and I was tired, hungry, and unorganized. This had to change. So, I decided to do three things: Segment my work Set realistic expectations Plan accordingly  Segmenting By Available Resources The first task was to decide what kind of work I could do in each location – if any. I found that I was dependent on a few things to get work done, such as power, the Internet, and a place to sit down. Before I fly, I take some time at home to get all of the work I’d like to accomplish while away segmented into these areas, and print that out on paper, which goes in my suit-coat pocket along with a mechanical pencil. I print my tickets, and I’m all set for the adventure ahead. Then I simply do each kind of work whenever I’m in that situation. No power There are certain times when I don’t have power available. But not only that, I might not even be able to use most of my electronics. So I now schedule as many phone calls as I can for the taxi/bus/train ride and the airports as I can. I have a paper notebook (Moleskine, of course) and a pencil and I print out any notes or numbers I need prior to the trip. Once I’m airborne or at the airport, I work on my laptop. I check and respond to e-mails, create slides, write code, do architecture, whatever I can.  If I can’t use any electronics, or once the power runs out, I schedule time for reading. I can read at the airport or anywhere, actually, even in-flight or any other transport. I “read with a pencil”, meaning I take a lot of notes, which I liketo put in OneNote, but since in most cases I don’t have power, I use the Moleskine to do that. Speaking of which, sometimes as I’m thinking I come up with new topics, ideas, blog posts, or things to teach in my classes. Once again I take out the notebook and write it down. All of these notes get a check-mark when I get back to the office and transfer the writing to OneNote. I’ve tried those “smart pens” and so on to automate this, but it just never works out. Pencil and paper are just fine. As I mentioned, sometime I just need to think. I’ll do nothing, and let my mind wander, thinking of nothing in particular, or some math problem or science question I’m interested in. My only issue with this is that I communicate tothink, and I don’t want to drive people crazy by being that guy that won’t shut up, so I think in a different way. Power, but no Internet or Phone If I have power but no Internet or phone, I focus on the laptop and the tablet as before, and I also recharge my other gadgets. Power, Internet, Phone and a Place to Work At first I thought that when I arrived at the hotel or event I could get the same amount of work done that I do at the office. Not so. There’s simply too many distractions, things you need, or other issues that allow this. Of course, Ican work on any device, read, think, write or whatever, but I am simply not as productive as I am in my home office. So I plan for about 25-50% as much work getting done in this environment as I think I could really do. I’ve done some measurements, and this holds out to be true almost every time. The key is that I re-set my expectations (and my co-worker’s expectations as well) that this is the case. I use the Out-Of-Office notices to let people know that I’m just not going to be 100% at this time – it’s hard for everyone, but it’s more honest and realistic, and I’d rather they know that – and that I realize that – than to let them think I’m totally available. Because I’m not – I’m traveling. I don’t tend to put too much detail, because after all I don’t necessarily want to let people know when I’m not home :) but I do think it’s important to let people that depend on my know that I’ll get back with them later. I hope this helps you think through your own methodology of staying productive when you travel. Or perhaps you just go offline, and don’t worry about any of this – good for you! That’s completely valid as well.   (Oh, and yes, I wrote this at 35K feet, on Alaska Airlines on a trip. :)  Practice what you preach, Buck.)

  Read the article

• Need help with a complex 3d scene (using Ogre and bullet)

  - by Matthias

  In my setup there is a box with a hole on one side, and a freely movable "stick" (or bar, tube). This stick can be inserted/moved through the hole into the box. This hole is exactly as wide as the diameter of the stick. In reality, when you would now hold the end of the stick in your hand and move the hand left/right or up/down, the other end of the stick, which is inside the box, would move into the opposite direction of your hand movement (because the stick is affixed at the pivot point where it is entering the box through the hole). (I hope you understand what I mean so far.) Now I need to simulate such a setup in a 3d program. I have already successfully developed an Ogre3d framework for this application, including bullet. But what I don't know is how I can implement in my program what I have described above. This application must include two more features: The scene camera is attached to the end of the stick that is inserted into the box. So when the user would move the mouse (to control "his" end of the stick outside the box), then the camera attached to the stick would move in the opposite direction, as described above. The stick has some length, and the user can push it further into the box, or pull it closer to him again. That means of course that the max. radius on which the end of the stick inside the box can move depends on how far the stick is pushed into the box. Thus, the more the stick is pushed into the box, the larger the max. radius of this end of the stick with the camera will be. I understand this is maybe quite a complex thing, so I don't expect any real source code here. I already have the Ogre and bullet part as said up and running, as well as a camera attached to the stick. This works fine. What I don't know though is how I can simulate the setup described above. Especially the requirement that the stick is affixed at the position of the hole on the box, where it is inserted into the box. Any ideas how I could approach to implement the described setup?

  Read the article

• New computer hangs on shutdown/reboot, how to troubleshoot?

  - by torbengb

  Summary: My machine hangs on shutdown/restart: all windows and the menu bar disappear but the desktop wallpaper remains, and it stays like that without disk activity forever (hours). It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown text. How can I troubleshoot this? Details: I've just received a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. The machine boots okay and works OK including WLAN and audio, but the graphics are not OK. Ubuntu offered to install&activate the current recommended Nvidia driver, but the machine hangs on shutdown/restart which prevents the installation of the proper Nvidia driver. I have to cycle the power to reboot. I ran the Update Manager in the hope that the updates would fix the hang-up. At the end of the update-installation it asked to reboot - and got stuck just like before. I see no obvious cause of the freeze and I don't know if it's caused by graphics problems or anything else. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing restart right after login). How can I determine what is causing the freeze? How can I fix this? I'm frankly rather disappointed because I bought this new machine in the hopes of getting the graphics to work, which failed miserably on my old machine, even though Ubuntu is supposed to be good with Nvidia. Being a fresh convert from Windows, I was hoping for a happier experience this time, so I'm very much looking forward to your suggestions! ... After posting this question, I see related questions in the right sidebar: this, this, and this. Don't know why these didn't show up while I composed by question. Those questions suggest some ACPI settings but I am not experienced enough to find/change those settings. I'll try the sudo shutdown -h now command when I get home and see if that works, then update this question. I did check the system BIOS but didn't see anything out of the ordinary.

  Read the article

• How to get ISA 2006 Web Proxy to work with the Single Network Adapter template

  - by tronda

  I need to test an issue with running our application behind a proxy server with different type of configurations, so I installed ISA 2006 Enterprise on a desktop computer. Since this computer only has a single network card and I want to start out easy, I chose the "Single Network Adapter" template. We have a internal NAT'ed network which is in the 10 range. I have defined the internal network on the ISA server to be 10.XXX.YY.1 - 10.XXX.YY.255 I also have the Default rule which denies all traffic, but I've added the following Rule: Policy - Protocols - From - To Accept HTTP Internal External HTTPS Local Host Internal HTTS Server Localhost Then I configured Internet Explorer on a virutal machine running XP within virtualbox with Brigded network (gets same network address range as regular computers on our network) similar to this Instead of the server name I used the IP address. When I try to access a web page, this doesn't go through and I get the following log messages on the proxy server: Original Client IP Client Agent Authenticated Client Service Referring Server Destination Host Name Transport HTTP Method MIME Type Object Source Source Proxy Destination Proxy Bidirectional Client Host Name Filter Information Network Interface Raw IP Header Raw Payload GMT Log Time Source Port Processing Time Bytes Sent Bytes Received Cache Information Error Information Authentication Server Log Time Client IP Destination IP Destination Port Protocol Action Rule Result Code HTTP Status Code Client Username Source Network Destination Network URL Server Name Log Record Type 10.XXX.YY.174 - TCP - - - 24.08.2010 13:25:24 1080 0 0 0 0x0 0x0 - 24.08.2010 06:25:24 10.XXX.YY.174 10.XXX.YY.175 80 HTTP Initiated Connection MyHTTPAccess 0x0 ERROR_SUCCESS Internal Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:24 2275 0 0 0 0x0 0x0 - 24.08.2010 06:25:24 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Initiated Connection 0x0 ERROR_SUCCESS Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:25 2275 0 0 0 0x0 0x0 - 24.08.2010 06:25:25 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Closed Connection 0x80074e20 FWX_E_GRACEFUL_SHUTDOWN Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:25 2276 0 0 0 0x0 0x0 - 24.08.2010 06:25:25 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Initiated Connection 0x0 ERROR_SUCCESS Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:26 2276 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Closed Connection 0x80074e20 FWX_E_GRACEFUL_SHUTDOWN Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:26 2277 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Initiated Connection 0x0 ERROR_SUCCESS Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.159 - UDP - - - 24.08.2010 13:25:26 68 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.159 255.255.255.255 67 DHCP (request) Denied Connection [Enterprise] Default rule 0xc004000d FWX_E_POLICY_RULES_DENIED Internal Local Host - PROXYTEST Firewall 10.XXX.YY.166 - UDP - - - 24.08.2010 13:25:26 68 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.166 255.255.255.255 67 DHCP (request) Denied Connection [Enterprise] Default rule 0xc004000d FWX_E_POLICY_RULES_DENIED Internal Local Host - PROXYTEST Firewall 0.0.0.0 Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Yes Proxy 10.XXX.YY.175 TCP GET Internet - - - Req ID: 096c76ae; Compression: client=No, server=No, compress rate=0% decompress rate=0% - - - 24.08.2010 13:25:27 0 2945 2581 446 0x0 0x40 24.08.2010 06:25:27 10.XXX.YY.174 10.XXX.YY.175 80 http Failed Connection Attempt MyHTTPAccess 10061 anonymous Internal Local Host http://www.vg.no/ PROXYTEST Web Proxy Filter 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:27 2277 0 0 0 0x0 0x0 - 24.08.2010 06:25:27 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Closed Connection 0x80074e20 FWX_E_GRACEFUL_SHUTDOWN Local Host Local Host - PROXYTEST Firewall

  Read the article

• Single Responsibility Principle Implementation

  - by Mike S

  In my spare time, I've been designing a CMS in order to learn more about actual software design and architecture, etc. Going through the SOLID principles, I already notice that ideas like "MVC", "DRY", and "KISS", pretty much fall right into place. That said, I'm still having problems deciding if one of two implementations is the best choice when it comes to the Single Responsibility Principle. Implementation #1: class User getName getPassword getEmail // etc... class UserManager create read update delete class Session start stop class Login main class Logout main class Register main The idea behind this implementation is that all user-based actions are separated out into different classes (creating a possible case of the aptly-named Ravioli Code), but following the SRP to a "tee", almost literally. But then I thought that it was a bit much, and came up with this next implementation class UserView extends View getLogin //Returns the html for the login screen getShortLogin //Returns the html for an inline login bar getLogout //Returns the html for a logout button getRegister //Returns the html for a register page // etc... as needed class UserModel extends DataModel implements IDataModel // Implements no new methods yet, outside of the interface methods // Haven't figured out anything special to go here at the moment // All CRUD operations are handled by DataModel // through methods implemented by the interface class UserControl extends Control implements IControl login logout register startSession stopSession class User extends DataObject getName getPassword getEmail // etc... This is obviously still very organized, and still very "single responsibility". The User class is a data object that I can manipulate data on and then pass to the UserModel to save it to the database. All the user data rendering (what the user will see) is handled by UserView and it's methods, and all the user actions are in one space in UserControl (plus some automated stuff required by the CMS to keep a user logged in or to ensure that they stay out.) I personally can't think of anything wrong with this implementation either. In my personal feelings I feel that both are effectively correct, but I can't decide which one would be easier to maintain and extend as life goes on (despite leaning towards Implementation #1.) So what about you guys? What are your opinions on this? Which one is better? What basics (or otherwise, nuances) of that principle have I missed in either design?

  Read the article

• Learn programming backwards, or "so I failed the FizzBuzz test. Now what?"

  - by moraleida

  A Little Background I'm 28 today, and I've never had any formal training in software development, but I do have two higher education degrees equivalent to a B.A in Public Relations and an Executive MBA focused on Project Management. I've worked on those fields for about 6 years total an then, 2,5 years ago I quit/lost my job and decided to shift directions. After a month thinking things through I decided to start freelancing developing small websites in WordPress. I self-learned my way into it and today I can say I run a humble but successful career developing themes and plugins from scratch for my clients - mostly agencies outsourcing some of their dev work for medium/large websites. But sometimes I just feel that not having studied enough math, or not having a formal understanding of things really holds me behind when I have to compete or work with more experienced developers. I'm constantly looking for ways to learn more but I seem to lack the basics. Unfortunately, spending 4 more years in Computer Science is not an option right now, so I'm trying to learn all I can from books and online resources. This method is never going to have NASA employ me but I really don't care right now. My goal is to first pass the bar and to be able to call myself a real programmer. I'm currently spending my spare time studying Java For Programmers (to get a hold on a language everyone says is difficult/demanding), reading excerpts of Code Complete (to get hold of best practices) and also Code: The Hidden Language of Computer Hardware and Software (to grasp the inner workings of computers). TL;DR So, my current situation is this: I'm basically capable of writing any complete system in PHP (with the help of Google and a few books), integrating Ajax, SQL and whatnot, and maybe a little slower than an experienced dev would expect due to all the research involved. But I was stranded yesterday trying to figure out (not Google) a solution for the FizzBuzz test because I didn't have the if($n1 % $n2 == 0) method modulus operator memorized. What would you suggest as a good way to solve this dilemma? What subjects/books should I study that would get me solving problems faster and maybe more "in a programmers way"? EDIT - Seems that there was some confusion about what did I not know to solve FizzBuzz. Maybe I didn't express myself right: I knew the steps needed to solve the problem. What I didn't memorize was the modulus operator. The problem was in transposing basic math to the program, not in knowing basic math. I took the test for fun, after reading about it on Coding Horror. I just decided it was a good base-comparison line between me and formally-trained devs. I just used this as an example of how not having dealt with math in a computer environment before makes me lose time looking up basic things like modulus operators to be able to solve simple problems.

  Read the article

• Computer Networks UNISA - Chap 10 &ndash; In Depth TCP/IP Networking

  - by MarkPearl

  After reading this section you should be able to Understand methods of network design unique to TCP/IP networks, including subnetting, CIDR, and address translation Explain the differences between public and private TCP/IP networks Describe protocols used between mail clients and mail servers, including SMTP, POP3, and IMAP4 Employ multiple TCP/IP utilities for network discovery and troubleshooting Designing TCP/IP-Based Networks The following sections explain how network and host information in an IPv4 address can be manipulated to subdivide networks into smaller segments. Subnetting Subnetting separates a network into multiple logically defined segments, or subnets. Networks are commonly subnetted according to geographic locations, departmental boundaries, or technology types. A network administrator might separate traffic to accomplish the following… Enhance security Improve performance Simplify troubleshooting The challenges of Classful Addressing in IPv4 (No subnetting) The simplest type of IPv4 is known as classful addressing (which was the Class A, Class B & Class C network addresses). Classful addressing has the following limitations. Restriction in the number of usable IPv4 addresses (class C would be limited to 254 addresses) Difficult to separate traffic from various parts of a network Because of the above reasons, subnetting was introduced. IPv4 Subnet Masks Subnetting depends on the use of subnet masks to identify how a network is subdivided. A subnet mask indicates where network information is located in an IPv4 address. The 1 in a subnet mask indicates that corresponding bits in the IPv4 address contain network information (likewise 0 indicates the opposite) Each network class is associated with a default subnet mask… Class A = 255.0.0.0 Class B = 255.255.0.0 Class C = 255.255.255.0 An example of calculating  the network ID for a particular device with a subnet mask is shown below.. IP Address = 199.34.89.127 Subnet Mask = 255.255.255.0 Resultant Network ID = 199.34.89.0 IPv4 Subnetting Techniques Subnetting breaks the rules of classful IPv4 addressing. Read page 490 for a detailed explanation Calculating IPv4 Subnets Read page 491 – 494 for an explanation Important… Subnetting only applies to the devices internal to your network. Everything external looks at the class of the IP address instead of the subnet network ID. This way, traffic directed to your network externally still knows where to go, and once it has entered your internal network it can then be prioritized and segmented. CIDR (classless Interdomain Routing) CIDR is also known as classless routing or supernetting. In CIDR conventional network class distinctions do not exist, a subnet boundary can move to the left, therefore generating more usable IP addresses on your network. A subnet created by moving the subnet boundary to the left is known as a supernet. With CIDR also came new shorthand for denoting the position of subnet boundaries known as CIDR notation or slash notation. CIDR notation takes the form of the network ID followed by a forward slash (/) followed by the number of bits that are used for the extended network prefix. To take advantage of classless routing, your networks routers must be able to interpret IP addresses that don;t adhere to conventional network class parameters. Routers that rely on older routing protocols (i.e. RIP) are not capable of interpreting classless IP addresses. Internet Gateways Gateways are a combination of software and hardware that enable two different network segments to exchange data. A gateway facilitates communication between different networks or subnets. Because on device cannot send data directly to a device on another subnet, a gateway must intercede and hand off the information. Every device on a TCP/IP based network has a default gateway (a gateway that first interprets its outbound requests to other subnets, and then interprets its inbound requests from other subnets). The internet contains a vast number of routers and gateways. If each gateway had to track addressing information for every other gateway on the Internet, it would be overtaxed. Instead, each handles only a relatively small amount of addressing information, which it uses to forward data to another gateway that knows more about the data’s destination. The gateways that make up the internet backbone are called core gateways. Address Translation An organizations default gateway can also be used to “hide” the organizations internal IP addresses and keep them from being recognized on a public network. A public network is one that any user may access with little or no restrictions. On private networks, hiding IP addresses allows network managers more flexibility in assigning addresses. Clients behind a gateway may use any IP addressing scheme, regardless of whether it is recognized as legitimate by the Internet authorities but as soon as those devices need to go on the internet, they must have legitimate IP addresses to exchange data. When a clients transmission reaches the default gateway, the gateway opens the IP datagram and replaces the client’s private IP address with an Internet recognized IP address. This process is known as NAT (Network Address Translation). TCP/IP Mail Services All Internet mail services rely on the same principles of mail delivery, storage, and pickup, though they may use different types of software to accomplish these functions. Email servers and clients communicate through special TCP/IP application layer protocols. These protocols, all of which operate on a variety of operating systems are discussed below… SMTP (Simple Mail transfer Protocol) The protocol responsible for moving messages from one mail server to another over TCP/IP based networks. SMTP belongs to the application layer of the ODI model and relies on TCP as its transport protocol. Operates from port 25 on the SMTP server Simple sub-protocol, incapable of doing anything more than transporting mail or holding it in a queue MIME (Multipurpose Internet Mail Extensions) The standard message format specified by SMTP allows for lines that contain no more than 1000 ascii characters meaning if you relied solely on SMTP you would have very short messages and nothing like pictures included in an email. MIME us a standard for encoding and interpreting binary files, images, video, and non-ascii character sets within an email message. MIME identifies each element of a mail message according to content type. MIME does not replace SMTP but works in conjunction with it. Most modern email clients and servers support MIME POP (Post Office Protocol) POP is an application layer protocol used to retrieve messages from a mail server POP3 relies on TCP and operates over port 110 With POP3 mail is delivered and stored on a mail server until it is downloaded by a user Disadvantage of POP3 is that it typically does not allow users to save their messages on the server because of this IMAP is sometimes used IMAP (Internet Message Access Protocol) IMAP is a retrieval protocol that was developed as a more sophisticated alternative to POP3 The single biggest advantage IMAP4 has over POP3 is that users can store messages on the mail server, rather than having to continually download them Users can retrieve all or only a portion of any mail message Users can review their messages and delete them while the messages remain on the server Users can create sophisticated methods of organizing messages on the server Users can share a mailbox in a central location Disadvantages of IMAP are typically related to the fact that it requires more storage space on the server. Additional TCP/IP Utilities Nearly all TCP/IP utilities can be accessed from the command prompt on any type of server or client running TCP/IP. The syntaxt may differ depending on the OS of the client. Below is a list of additional TCP/IP utilities – research their use on your own! Ipconfig (Windows) & Ifconfig (Linux) Netstat Nbtstat Hostname, Host & Nslookup Dig (Linux) Whois (Linux) Traceroute (Tracert) Mtr (my traceroute) Route

  Read the article

• Send an E-mail Quickly with the GmailThis! Bookmarklet

  - by Asian Angel

  Sometimes you need to send out a quick e-mail for a project that you are working on, something really important that you just remembered, or perhaps just a note to yourself. If you use Gmail and like keeping things simple then join us as we look at the GmailThis! Bookmarklet. GmailThis! in Action To get set up all that you need to do is visit the webpage (link provided below) and drag the bookmarklet to your “Bookmarks Toolbar”. For our example we decided to go with the “personal note” approach. As you can see here we selected/highlighted a portion of the text and then clicked on our new bookmarklet. The bookmarklet will automatically copy and paste the name of the webpage, the URL, and any text that you selected/highlighted into the new e-mail. A nice feature that we liked was that it opened in a new temporary window to help focus on composing our letter. This is what you will see when you have finished your letter and clicked “Send”. The window will automatically close itself after a few seconds so that you do not even have to worry with it afterwards. Looking at our “Inbox” there is our new e-mail looking oh so nice. Conclusion If you need to send out a quick e-mail using your Gmail account then this bookmarklet makes it as quick and simple as possible. This is definitely one to add to your bookmarklets collection. Links Get the GmailThis! Bookmarklet for your browser Similar Articles Productive Geek Tips How to Send and Receive Hotmail from Your Gmail AccountShare Your Favorite Webpages with the AddThis BookmarkletPower Up and Manage Your Windows Send To Menu with Send To ToysTurn off New Mail Notification for PocoMail Junk Mail FolderCreate an Email Template in Outlook 2003 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online

  Read the article

• Parallel MSBuild FTW - Build faster in parallel

  - by deadlydog

  Hey everyone, I just discovered this great post yesterday that shows how to have msbuild build projects in parallel Basically all you need to do is pass the switches “/m:[NumOfCPUsToUse] /p:BuildInParallel=true” into MSBuild. Example to use 4 cores/processes (If you just pass in “/m” it will use all CPU cores): MSBuild /m:4 /p:BuildInParallel=true "C:\dev\Client.sln" Obviously this trick will only be useful on PCs with multi-core CPUs (which we should all have by now) and solutions with multiple projects; So there’s no point using it for solutions that only contain one project.  Also, testing shows that using multiple processes does not speed up Team Foundation Database deployments either in case you’re curious Also, I found that if I didn’t explicitly use “/p:BuildInParallel=true” I would get many build errors (even though the MSDN documentation says that it is true by default). The poster boasts compile time improvements up to 59%, but the performance boost you see will vary depending on the solution and its project dependencies.  I tested with building a solution at my office, and here are my results (runs are in seconds): # of Processes 1st Run 2nd Run 3rd Run Avg Performance 1 192 195 200 195.67 100% 2 155 156 156 155.67 79.56% 4 146 149 146 147.00 75.13% 8 136 136 138 136.67 69.85%   So I updated all of our build scripts to build using 2 cores (~20% speed boost), since that gives us the biggest bang for our buck on our solution without bogging down a machine, and developers may sometimes compile more than 1 solution at a time.  I’ve put the any-PC-safe batch script code at the bottom of this post. The poster also has a follow-up post showing how to add a button and keyboard shortcut to the Visual Studio IDE to have VS build in parallel as well (so you don’t have to use a build script); if you do this make sure you use the .Net 4.0 MSBuild, not the 3.5 one that he shows in the screenshot.  While this did work for me, I found it left an MSBuild.exe process always hanging around afterwards for some reason, so watch out (batch file doesn’t have this problem though).  Also, you do get build output, but it may not be the same that you’re used to, and it doesn’t say “Build succeeded” in the status bar when completed, so I chose to not make this my default Visual Studio build option, but you may still want to. Happy building! ------------------------------------------------------------------------------------- :: Calculate how many Processes to use to do the build. SET NumberOfProcessesToUseForBuild=1  SET BuildInParallel=false if %NUMBER_OF_PROCESSORS% GTR 2 (                 SET NumberOfProcessesToUseForBuild=2                 SET BuildInParallel=true ) MSBuild /maxcpucount:%NumberOfProcessesToUseForBuild% /p:BuildInParallel=%BuildInParallel% "C:\dev\Client.sln"

  Read the article

• ASA 5505 stops local internet when connected to VPN

  - by g18c

  Hi I have a Cisco ASA router running firmware 8.2(5) which hosts an internal LAN on 192.168.30.0/24. I have used the VPN Wizard to setup L2TP access and I can connect in fine from a Windows box and can ping hosts behind the VPN router. However, when connected to the VPN I can no longer ping out to my internet or browse web pages. I would like to be able to access the VPN, and also browse the internet at the same time - I understand this is called split tunneling (have ticked the setting in the wizard but to no effect) and if so how do I do this? Alternatively, if split tunneling is a pain to setup, then making the connected VPN client have internet access from the ASA WAN IP would be OK. Thanks, Chris names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.30.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 208.74.158.58 255.255.255.252 ! ftp mode passive access-list inside_nat0_outbound extended permit ip any 10.10.10.0 255.255.255.128 access-list inside_nat0_outbound extended permit ip 192.168.30.0 255.255.255.0 192.168.30.192 255.255.255.192 access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.30.0 255.255.255.0 access-list DefaultRAGroup_splitTunnelAcl_1 standard permit 192.168.30.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool LANVPNPOOL 192.168.30.220-192.168.30.249 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 192.168.30.0 255.255.255.0 route outside 0.0.0.0 0.0.0.0 208.74.158.57 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.30.0 255.255.255.0 inside snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.30.3 vpn-tunnel-protocol l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl_1 username user password Cj7W5X7wERleAewO8ENYtg== nt-encrypted privilege 0 tunnel-group DefaultRAGroup general-attributes address-pool LANVPNPOOL default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context : end

  Read the article

• CPU/JVM/JBoss 7 slows down over time

  - by lukas

  I'm experiencing performance slow down on JBoss 7.1.1 Final. I wrote simple program that demostrates this behavior. I generate an array of 100,000 of random integers and run bubble sort on it. @Model public class PerformanceTest { public void proceed() { long now = System.currentTimeMillis(); int[] arr = new int[100000]; for(int i = 0; i < arr.length; i++) { arr[i] = (int) (Math.random() * 200000); } long now2 = System.currentTimeMillis(); System.out.println((now2 - now) + "ms took to generate array"); now = System.currentTimeMillis(); bubbleSort(arr); now2 = System.currentTimeMillis(); System.out.println((now2 - now) + "ms took to bubblesort array"); } public void bubbleSort(int[] arr) { boolean swapped = true; int j = 0; int tmp; while (swapped) { swapped = false; j++; for (int i = 0; i < arr.length - j; i++) { if (arr[i] > arr[i + 1]) { tmp = arr[i]; arr[i] = arr[i + 1]; arr[i + 1] = tmp; swapped = true; } } } } } Just after I start the server, it takes approximately 22 seconds to run this code. After few days of JBoss 7.1.1. running, it takes 330 sec to run this code. In both cases, I launch the code when the CPU utilization is very low (say, 1%). Any ideas why? I run the server with following arguments: -Xms1280m -Xmx2048m -XX:MaxPermSize=2048m -Djava.net.preferIPv4Stack=true -Dorg.jboss.resolver.warning=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djboss.modules.system.pkgs=org.jboss.byteman -Djava.awt.headless=true -Duser.timezone=UTC -Djboss.server.default.config=standalone-full.xml -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n I'm running it on Linux 2.6.32-279.11.1.el6.x86_64 with java version "1.7.0_07". It's within J2EE applicaiton. I use CDI so I have a button on JSF page that will call method "proceed" on @RequestScoped component PerformanceTest. I deploy this as separate war file and even if I undeploy other applications, it doesn't change the performance. It's a virtual machine that is sharing CPUs with another machine but that one doesn't consume anything. Here's yet another observation: when the server is after fresh start and I run the bubble sort, It utilizes 100% of one processor core. It never switches to another core or drops utilization below 95%. However after some time the server is running and I'm experiencing the performance problems, the method above is utilizing CPU core usually 100%, however I just found out from htop that this task is being switched very often to other cores. That is, at the beginning it's running on core #1, after say 2 seconds it's running on #5 then after say 2 seconds #8 etc. Furthermore, the utilization is not kept at 100% at the core but sometimes drops to 80% or even lower. For the server after fresh start, even though If I simulate a load, it never switches the task to another core.

  Read the article

• How to switch off wifi on startup or from the console

  - by mit

  I have installed ubuntu 10.04 on a laptop. Wifi is switched on by default on startup. I can disable it rightclicking the network manager icon in the gnome bar. How can I set it to have wifi switched off as default? Alternatively, how can I switch off wifi on the console? I tried already the rfkill command but it does not list any devices and it does not switch off wifi, I tried different parameters. This is a standard install of the Ubuntu 10.04 i386 Desktop Live CD on an IBM T40 Laptop. EDIT A: This is the output of some rfkill commands on my system, and it does not affect the wifi of the laptop: $ rfkill --help Usage: rfkill [options] command Options: --version show version (0.4) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm $ rfkill list $ rfkill list wifi $ rfkill list all $ rfkill list wlan $ sudo rfkill list all $ sudo rfkill block all $ sudo rfkill block wlan $ sudo rfkill block wifi $ EDIT B: Now I found out that sudo ifconfig eth1 down turns it off. And I can turn it on through the gnome network applet again. But the applet does not reflect the change from the commandline, it stills believes wifi is switched on. I have to switch it off and on again on the applet to switch it on again, when I switched it off from the console. Is there a better way? This is what the syslog looks like when I switch wireless off and on again from the network manager: NetworkManager: <info> (eth1): device state change: 3 -> 2 (reason 0) NetworkManager: <info> (eth1): deactivating device (reason: 0). NetworkManager: <info> Policy set '24' (eth0) as default for routing and DNS. NetworkManager: <info> (eth1): taking down device. avahi-daemon[660]: Withdrawing address record for fe80::202:8aff:feba:d798 on eth1. kernel: [ 971.472116] airo(eth1): cmd:3 status:7f03 rsp0:0 rsp1:0 rsp2:0 NetworkManager: <info> (eth1): bringing up device. NetworkManager: <info> (eth1): supplicant interface state: starting -> ready NetworkManager: <info> (eth1): device state change: 2 -> 3 (reason 42) avahi-daemon[660]: Registering new address record for fe80::202:8aff:feba:d798 on eth1.*. kernel: [ 965.512048] eth1: no IPv6 routers present

  Read the article

• Some More New ADF Features in JDeveloper 11.1.2

  - by Steven Davelaar

  The official list of new features in JDeveloper 11.1.2 is documented here. While playing with JDeveloper 11.1.2 and scanning the web user interface developer's guide for 11.1.2, I noticed some additional new features in ADF Faces, small but might come in handy:  You can use the af:formatString and af:formatNamed constructs in EL expressions to use substituation variables. For example: <af:outputText value="#{af:formatString('The current user is: {0}',someBean.currentUser)}"/> See section 3.5.2 in web user interface guide for more info. A new ADF Faces Client Behavior tag: af:checkUncommittedDataBehavior. See section 20.3 in web user interface guide for more info. For this tag to work, you also need to set the  uncommittedDataWarning  property on the af:document tag. And this property has quite some issues as you can read here. I did a quick test, the alert is shown for a button that is on the same page, however, if you have a menu in a shell page with dynamic regions, then clicking on another menu item does not raise the alert if you have pending changes in the currently displayed region. For now, the JHeadstart implementation of pending changes still seems the best choice (will blog about that soon). New properties on the af:document tag: smallIconSource creates a so-called favicon that is displayed in front of the URL in the browser address bar. The largeIconSource property specifies the icon used by a mobile device when bookmarking the page to the home page. See section 9.2.5 in web user interface guide for more info. Also notice the failedConnectionText property which I didn't know but was already available in JDeveloper 11.1.1.4. The af:showDetail tag has a new property handleDisclosure which you can set to client for faster rendering. In JDeveloper 11.1.1.x, an expression like #{bindings.JobId.inputValue} would return the internal list index number when JobId was a list binding. To get the actual JobId attribute value, you needed to use #{bindings.JobId.attributeValue}. In JDeveloper 11.1.2 this is no longer needed, the #{bindings.JobId.inputValue} expression will return the attribute value corresponding with the selected index in the choice list. Did you discover other "hidden" new features? Please add them as comment to this blog post so everybody can benefit. 

  Read the article

• Black screen on latest Nvidia Cards when starting LightDM/Ubuntu

  - by Luis Alvarado

  Today I installed an Nvidia GT440 on my computer, changing the one that existed there, an Nvidia 9500GT. After changing it I started getting a problem where the screen just went black when loading the lightdm login screen (Where I punt my user and password). The thing is, if I disconnect the VGA cable and connect it again I get to see the lightdm greeter and everything works perfect. The problem is that I have to connect/disconnect every time I reboot the PC. I tried installing the 285.xx drivers. Same problem. I removed the Nvidia drivers installed with Jockey, rebooted, same problem. I install the current 280.xx again, same problem. After all that I installed a fresh install of Ubuntu, selected to install the Nvidia drivers while installing it from the livecd. After booting the same problem appeared. Dmesg does not say anything wrong about it. Same goes for the log from Jockey. What else should I check or what to do to solve it. Just to clarify, this does not happen BEFORE the lightdm greeter appears. Am guessing before the actual use of the video card with X starts with all the 2D/3D stuff that is used in ligthdm and unity. I can use any tty and even see the Ubuntu logo when starting. UPDATE: When I open a game in fullscreen the problem appears again. I have to unplug the monitor cable and plug it back in to see the game. Then when I quit the game I have to do it again to see the desktop. UPDATE 2: Today I bought a HDMI cable, connected the video card to the TV am testing it with and it actually did log in correctly without any black screen but it shows the resolution a little over the actual size of the screen. So I see only half of the launcher since the left side of it is hidden outside of the real resolution and the top bar is beyond the resolution. So the black screen is related to the VGA connection.

  Read the article

• Office 2010 Professional Plus (Top 10 reasons to upgrade)

  - by mbcrump

  Being a huge nerd, I decided that I would go ahead and upgrade to the latest and greatest office. That being, Office 2010 Professional Plus. The biggest concern that I had was loosing all my mail settings from Outlook 2007. Thankfully, it upgrade gracefully and worked like a charm. So lets start this top 10 list. 1) You can upgrade without fear of loosing all your stuff! As you can tell by the screenshot below, you can select what you want to do. I selected to remove all previous versions.    2) Outlook conversations: Just like GMail, you can now group emails by conversations. This is simply awesome and a must have. 3) The ability to ignore conversations. If you are on a email thread that has nothing to do with you. Simply “ignore” the conversation and all emails go into the deleted folder. 4) Quick Steps, do you send an email to the same team member or group constantly. With quick steps, its just one click away. 5) Spell check in the Subject line! 6)  Easier Screenshots, built in just click the button. No more ALT-Printscreen for those that are not aware of the awesome SnagIT 10 that's out. 7) Open in protected view. When you open a document from an email attachment, it lets you know the file may be unsafe. You can click a button to enable editing. This is great for preventing macros.       8) Excel has always had a variety of charts and graphs available to visually depict data and trends. With Excel 2010, though, Microsoft has added a new feature called Sparklines, which allows you to place a mini-graph or trend line in a single cell. The Sparklines are a cool way to quickly and simply add a visual element without having to go through the effort of inserting a graph or chart that overwhelms the worksheet. 9) Contact actions. If you hover over a name in the form or fields on an email, you get a popup giving you several actions you can perform on the person such as adding them to your Outlook contacts, scheduling a meeting, viewing their stored contact information if they are already in your contacts, sending an instant message or even starting a telephone call. 10) Windows 7 Task Bar Context Menu – I love the jumplist. I don’t know how much that I would actually use it but it just rocks.

  Read the article

• Editing /.config/dconf/user

  - by user86322

  I am having a problem with Gnome3 (actually, I have it set to fallback mode, or Gnome 2). I have two displays and I need an X screen (I used nvidia-xconfig and nvidia-settings to do this) for each screen. However, every time I either restart X or log in, Gnome seems to be adding the objects values under /gnome/gnome-panel/layouts (ex. first time I set the two separate X screens I had clock, then log out/in, there was clock and clock1 under objects, and then log out/in there were three, clock, clock1, clock2,.......log out/in, ............30 times....clock, clock1, clock2, ......clock 42.....!! The same thing goes for top-panels, menu-bars, etc.) After a while, I found out I could remove all those using the dconf-editor, going to /gnome/gnome-panel/layouts, removing all the repetitions under fields objects-id-list and top-id-list and leaving one value of each object. This is not a solution but at least allow me to keep using Linux without so much problem. However, the problem persists every time I restart X or log in. I now finally learned about "dconf" and where the user profile settings are located (~/.config/dconf/user) and one can use "dconf" to see the keys. In my case, I need to change/remove many keys (all those clocksX, workspace-X, menu-bar-X, etc., where goes from 1 to 42 and still counting) so it's really tedious and boring to be changing one by one using "dconf write". So I found "dconf dump", which actually allow me to dump everything into a .txt file and edit the file really quick (i.e, "dconf dump / >> dump_user.txt"). The problems? Two of them: How do I "load" back "dump_user.txt" I edited into the user profile? (I read somewhere there was a "dconf reload" but reload doesn't exist as a command under "dconf") How do I stop Gnome from keep adding more objects to my desktop environment every time I log in/restart X? NOTE: The problem doesn't occur when I set the displays to use TwinView feature (i.e., the desktop is extended/shared by both displays). However, for my case I need two separate X's. Any help/suggestion would be greatly appreciated. Thanks

  Read the article

• Why can't a blendShader sample anything but the current coordinate of the background image?

  - by Triynko

  In Flash, you can set a DisplayObject's blendShader property to a pixel shader (flash.shaders.Shader class). The mechanism is nice, because Flash automatically provides your Shader with two input images, including the background surface and the foreground display object's bitmap. The problem is that at runtime, the shader doesn't allow you to sample the background anywhere but under the current output coordinate. If you try to sample other coordinates, it just returns the color of the current coordinate instead, ignoring the coordinates you specified. This seems to occur only at runtime, because it works properly in the Pixel Bender toolkit. This limitation makes it impossible to simulate, for example, the Aero Glass effect in Windows Vista/7, because you cannot sample the background properly for blurring. I must mention that it is possible to create the effect in Flash through manual composition techniques, but it's hard to determine when it actually needs updated, because Flash does not provide information about when a particular area of the screen or a particular display object needs re-rendered. For example, you may have a fixed glass surface with objects moving underneath it that don't dispatch events when they move. The only alternative is to re-render the glass bar every frame, which is inefficient, which is why I am trying to do it through a blendShader so Flash determines when it needs rendered automatically. Is there a technical reason for this limitation, or is it an oversight of some sort? Does anyone know of a workaround, or a way I could provide my manual composition implementation with information about when it needs re-rendered? The limitation is mentioned with no explanation in the last note in this page: http://help.adobe.com/en_US/as3/dev/WSB19E965E-CCD2-4174-8077-8E5D0141A4A8.html It says: "Note: When a Pixel Bender shader program is run as a blend in Flash Player or AIR, the sampling and outCoord() functions behave differently than in other contexts.In a blend, a sampling function will always return the current pixel being evaluated by the shader. You cannot, for example, use add an offset to outCoord() in order to sample a neighboring pixel. Likewise, if you use the outCoord() function outside a sampling function, its coordinates always evaluate to 0. You cannot, for example, use the position of a pixel to influence how the blended images are combined."

  Read the article

• obtaining nimbuzz server certificate for nmdecrypt expert in NetMon

  - by lurscher

  I'm using Network Monitor 3.4 with the nmdecrypt expert. I'm opening a nimbuzz conversation node in the conversation window and i click Expert- nmDecrpt - run Expert that shows up a window where i have to add the server certificate. I am not sure how to retrieve the server certificate for nimbuzz XMPP chat service. Any idea how to do this? this question is a follow up question of this one. Edit for some background so it might be that this is encrypted with the server pubkey and i cannot retrieve the message, unless i debug the native binary and try to intercept the encryption code. I have a test client (using agsXMPP) that is able to connect with nimbuzz with no problems. the only thing that is not working is adding invisible mode. It seems this is some packet sent from the official client during login which i want to obtain. any suggestions to try to grab this info would be greatly appreciated. Maybe i should get myself (and learn) IDA pro? This is what i get inspecting the TLS frames on Network Monitor: Frame: Number = 81, Captured Frame Length = 769, MediaType = ETHERNET + Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[...],SourceAddress:[....] + Ipv4: Src = ..., Dest = 192.168.2.101, Next Protocol = TCP, Packet ID = 9939, Total IP Length = 755 - Tcp: Flags=...AP..., SrcPort=5222, DstPort=3578, PayloadLen=715, Seq=4101074854 - 4101075569, Ack=1127356300, Win=4050 (scale factor 0x0) = 4050 SrcPort: 5222 DstPort: 3578 SequenceNumber: 4101074854 (0xF4716FA6) AcknowledgementNumber: 1127356300 (0x4332178C) + DataOffset: 80 (0x50) + Flags: ...AP... Window: 4050 (scale factor 0x0) = 4050 Checksum: 0x8841, Good UrgentPointer: 0 (0x0) TCPPayload: SourcePort = 5222, DestinationPort = 3578 TLSSSLData: Transport Layer Security (TLS) Payload Data - TLS: TLS Rec Layer-1 HandShake: Server Hello.; TLS Rec Layer-2 HandShake: Certificate.; TLS Rec Layer-3 HandShake: Server Hello Done. - TlsRecordLayer: TLS Rec Layer-1 HandShake: ContentType: HandShake: - Version: TLS 1.0 Major: 3 (0x3) Minor: 1 (0x1) Length: 42 (0x2A) - SSLHandshake: SSL HandShake ServerHello(0x02) HandShakeType: ServerHello(0x02) Length: 38 (0x26) - ServerHello: 0x1 + Version: TLS 1.0 + RandomBytes: SessionIDLength: 0 (0x0) TLSCipherSuite: TLS_RSA_WITH_AES_256_CBC_SHA { 0x00, 0x35 } CompressionMethod: 0 (0x0) - TlsRecordLayer: TLS Rec Layer-2 HandShake: ContentType: HandShake: - Version: TLS 1.0 Major: 3 (0x3) Minor: 1 (0x1) Length: 654 (0x28E) - SSLHandshake: SSL HandShake Certificate(0x0B) HandShakeType: Certificate(0x0B) Length: 650 (0x28A) - Cert: 0x1 CertLength: 647 (0x287) - Certificates: CertificateLength: 644 (0x284) - X509Cert: Issuer: nimbuzz.com,Nimbuzz,NL, Subject: nimbuzz.com,Nimbuzz,NL + SequenceHeader: - TbsCertificate: Issuer: nimbuzz.com,Nimbuzz,NL, Subject: nimbuzz.com,Nimbuzz,NL + SequenceHeader: + Tag0: + Version: (2) + SerialNumber: -1018418383 + Signature: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - Issuer: nimbuzz.com,Nimbuzz,NL - RdnSequence: nimbuzz.com,Nimbuzz,NL + SequenceOfHeader: 0x1 + Name: NL + Name: Nimbuzz + Name: nimbuzz.com + Validity: From: 02/22/10 20:22:32 UTC To: 02/20/20 20:22:32 UTC + Subject: nimbuzz.com,Nimbuzz,NL - SubjectPublicKeyInfo: RsaEncryption (1.2.840.113549.1.1.1) + SequenceHeader: + Algorithm: RsaEncryption (1.2.840.113549.1.1.1) - SubjectPublicKey: - AsnBitStringHeader: - AsnId: BitString type (Universal 3) - LowTag: Class: (00......) Universal (0) Type: (..0.....) Primitive TagValue: (...00011) 3 - AsnLen: Length = 141, LengthOfLength = 1 LengthType: LengthOfLength = 1 Length: 141 bytes BitString: + Tag3: + Extensions: - SignatureAlgorithm: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - SequenceHeader: - AsnId: Sequence and SequenceOf types (Universal 16) + LowTag: - AsnLen: Length = 13, LengthOfLength = 0 Length: 13 bytes, LengthOfLength = 0 + Algorithm: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - Parameters: Null Value - Sha1WithRSAEncryption: Null Value + AsnNullHeader: - Signature: - AsnBitStringHeader: - AsnId: BitString type (Universal 3) - LowTag: Class: (00......) Universal (0) Type: (..0.....) Primitive TagValue: (...00011) 3 - AsnLen: Length = 129, LengthOfLength = 1 LengthType: LengthOfLength = 1 Length: 129 bytes BitString: + TlsRecordLayer: TLS Rec Layer-3 HandShake:

  Read the article

• Problem with OpenGL or Unity, need Gnome fallback mode

  - by William Wind

  This question is in two parts, and I have been searching the web for days to find answers. With no luck I thought I'd drop by and ask for your help. Here goes: 1.) I'm running Ubuntu 13.04 and one day last week Unity suddenly wound't work. After the login screen, I was either faced with an all black and non-responsive screen, or sometimes it booted and I could see my desktop wallpaper (and add and remove icons/folders from the desktop). But there was no menu in the left hand side and no top bar :-( However I could still enter the terminal. I borrowed my dad's laptop and looked for a solution online. About two days later I gave up (I'm still kind of a n00b at Linux) and found a way to install Gnome Fallback, via the terminal. When I used it, I had the same problem. [clue #1] Missing menues. But if I rebooted into Gnome Fallback mode with no effects. It worked. Great! I have used that for some days now, while still trying to fix the original problem with either Unity or OpenGl or whatever went wrong in the first place. With no luck. After giving up on my search for a fix (I know that came out wrong) -- I decided to reinstall Ubuntu 13.04 from a CD. But! After that I was left where I began. When booting into my account, it only shows the desktop wallpaper and the icons. I can click and enter the folders, but not go into the menues. Last time I fixed it with Gnome Fallback mode, because I could enter the terminal and the PC was automatically online, via wireless network. But not this time, I can't get online. So: 1.) How do I via the LiveCD Ubuntu version (the one I'm using right now) install Gnome Fallback unto the harddrive based system? 2.) If impossible. How can I access the wireless Internet via the terminal, so I can install Gnome Fallback, from the "broken" Unity session. 3.) Is there any other things that I should try? Please help me, PS: My GFX-card is an ATI Radeon something and I have install and used the "Redwood" drive (I think its called) for many weeks prior to the shutdown.

  Read the article

• Our Favorite Highlights from OpenWorld 2012

  - by Kathy.Miedema

  By Kathy Miedema and Misha Vaughan, Oracle Applications User Experience The Oracle Applications User Experience (UX) team’s activities around OpenWorld expand every year, but this year we certainly raised the bar.   Members of our team helped deliver three, separate, all-day training events in the week prior to OpenWorld. Our Fusion User Experience Advocates (FXA) and Applications UX Sales Ambassadors (SAMBA) have all-new material around the Oracle user experience to deliver at conferences in the coming year - Fusion Applications design patterns, mobile design patterns, and the new face of Fusion. We also delivered a hands-on workshop sharing user experience tools for our customers that is designed to answer this question: "If I have no UX staff, what do I do?" We also spent the weeks just before OpenWorld preparing to talk about the new face of Fusion Applications, a greatly simplified entry experience into Fusion Applications for self-service users, CRM users, and IT managers who want to change the look and feel quickly. Special thanks to Oracle ACE Director Floyd Teter for the first mention of our project.Jeremy Ashley, VP, Oracle Applications User Experience Customers may have seen one of the many OpenWorld session demos of the new face of Fusion, which will be available with Fusion Applications soon. It was shown in sessions by Oracle's Chris Leone, Anthony Lye, and our own Vice President, Jeremy Ashley, among others.   Leone reinforced the importance of user experience as one of three main design principles for Fusion Applications, emphasizing that Fusion was designed from the beginning to be intelligent, social, and mobile. User experience highlights of the new face of Fusion, he said, included the need for "zero training," and he called the experience "easy to use." He added that deploying it for HCM self-service would be effortless.  Customers take part in a usability lab tour during OpenWorld 2012. Customers also may have seen the new face of Fusion on the demogrounds or during one of our teams' chartered lab tours at the end of the week. We tested other new designs at our on-site lab in the Intercontinental Hotel, next to Moscone West. Applications User Experience team members show eye-tracking and mobile demos at OOW. We were also excited to kick off new branches of the Oracle Usability Advisory Board, which now has groups in Latin America and the Middle East, in addition to North America and EMEA.   And we were pleasantly surprised by the interest in one of our latest research projects, Oracle Voice, which is designed to enable faster data input for on-the-go users. We offer a big thank-you to the Nuance demopod for sharing the demo with OpenWorld attendees.  For more information on our program and products like the new face of Fusion, please comment below. 

  Read the article

• Combining Shared Secret and Certificates

  - by Michael Stephenson

  As discussed in the introduction article this walkthrough will explain how you can implement WCF security with the Windows Azure Service Bus to ensure that you can protect your endpoint in the cloud with a shared secret but also combine this with certificates so that you can identify the sender of the message.   Prerequisites As in the previous article before going into the walk through I want to explain a few assumptions about the scenario we are implementing but to keep the article shorter I am not going to walk through all of the steps in how to setup some of this. In the solution we have a simple console application which will represent the client application. There is also the services WCF application which contains the WCF service we will expose via the Windows Azure Service Bus. The WCF Service application in this example was hosted in IIS 7 on Windows 2008 R2 with AppFabric Server installed and configured to auto-start the WCF listening services. I am not going to go through significant detail around the IIS setup because it should not matter in relation to this article however if you want to understand more about how to configure WCF and IIS for such a scenario please refer to the following paper which goes into a lot of detail about how to configure this. The link is: http://tinyurl.com/8s5nwrz   Setting up the Certificates To keep the post and sample simple I am going to use the local computer store for all certificates but this bit is really just the same as setting up certificates for an example where you are using WCF without using Windows Azure Service Bus. In the sample I have included two batch files which you can use to create the sample certificates or remove them. Basically you will end up with: A certificate called PocServerCert in the personal store for the local computer which will be used by the WCF Service component A certificate called PocClientCert in the personal store for the local computer which will be used by the client application A root certificate in the Root store called PocRootCA with its associated revocation list which is the root from which the client and server certificates were created   For the sample Im just using development certificates like you would normally, and you can see exactly how these are configured and placed in the stores from the batch files in the solution using makecert and certmgr.   The Service Component To begin with let's look at the service component and how it can be configured to listen to the service bus using a shared secret but to also accept a username token from the client. In the sample the service component is called Acme.Azure.ServiceBus.Poc.Cert.Services. It has a single service which is the Visual Studio template for a WCF service when you add a new WCF Service Application so we have a service called Service1 with its Echo method. Nothing special so far!.... The next step is to look at the web.config file to see how we have configured the WCF service. In the services section of the WCF configuration you can see I have created my service and I have created a local endpoint which I simply used to do a little bit of diagnostics and to check it was working, but more importantly there is the Windows Azure endpoint which is using the ws2007HttpRelayBinding (note that this should also work just the same if your using netTcpRelayBinding). The key points to note on the above picture are the service behavior called MyServiceBehaviour and the service bus endpoints behavior called MyEndpointBehaviour. We will go into these in more detail later.   The Relay Binding The relay binding for the service has been configured to use the TransportWithMessageCredential security mode. This is the important bit where the transport security really relates to the interaction between the service and listening to the Azure Service Bus and the message credential is where we will use our certificate like we have specified in the message/clientCrentialType attribute. Note also that we have left the relayClientAuthenticationType set to RelayAccessToken. This means that authentication will be made against ACS for accessing the service bus and messages will not be accepted from any sender who has not been authenticated by ACS.   The Endpoint Behaviour In the below picture you can see the endpoint behavior which is configured to use the shared secret client credential for accessing the service bus and also for diagnostic purposes I have included the service registry element.     Hopefully if you are familiar with using Windows Azure Service Bus relay feature the above is very familiar to you and this is a very common setup for this section. There is nothing specific to the username token implementation here. The Service Behaviour Now we come to the bit with most of the certificate stuff in it. When you configure the service behavior I have included the serviceCredentials element and then setup to use the clientCertificate check and also specifying the serviceCertificate with information on how to find the servers certificate in the store.     I have also added a serviceAuthorization section where I will implement my own authorization component to perform additional security checks after the service has validated that the message was signed with a good certificate. I also have the same serviceSecurityAudit configuration to log access to my service. My Authorization Manager The below picture shows you implementation of my authorization manager. WCF will eventually hand off the message to my authorization component before it calls the service code. This is where I can perform some logic to check if the identity is allowed to access resources. In this case I am simple rejecting messages from anyone except the PocClientCertificate.     The Client Now let's take a look at the client side of this solution and how we can configure the client to authenticate against ACS but also send a certificate over to the service component so it can implement additional security checks on-premise. I have a console application and in the program class I want to use the proxy generated with Add Service Reference to send a message via the Azure Service Bus. You can see in my WCF client configuration below I have setup my details for the azure service bus url and am using the ws2007HttpRelayBinding.   Next is my configuration for the relay binding. You can see below I have configured security to use TransportWithMessageCredential so we will flow the token from a certificate with the message and also the RelayAccessToken relayClientAuthenticationType which means the component will validate against ACS before being allowed to access the relay endpoint to send a message.     After the binding we need to configure the endpoint behavior like in the below picture. This contains the normal transportClientEndpointBehaviour to setup the ACS shared secret configuration but we have also configured the clientCertificate to look for the PocClientCert.     Finally below we have the code of the client in the console application which will call the service bus. You can see that we have created our proxy and then made a normal call to a WCF in exactly the normal way but the configuration will jump in and ensure that a token is passed representing the client certificate.     Conclusion As you can see from the above walkthrough it is not too difficult to configure a service to use both a shared secret and certificate based token at the same time. This gives you the power and protection offered by the access control service in the cloud but also the ability to flow additional tokens to the on-premise component for additional security features to be implemented. Sample The sample used in this post is available at the following location: https://s3.amazonaws.com/CSCBlogSamples/Acme.Azure.ServiceBus.Poc.Cert.zip

  Read the article

• Should a server "be lenient" in what it accepts and "discard faulty input silently"?

  - by romkyns

  I was under the impression that by now everyone agrees this maxim was a mistake. But I recently saw this answer which has a "be lenient" comment upvoted 137 times (as of today). In my opinion, the leniency in what browsers accept was the direct cause of the utter mess that HTML and some other web standards were a few years ago, and have only recently begun to properly crystallize out of that mess. The way I see it, being lenient in what you accept will lead to this. The second part of the maxim is "discard faulty input silently, without returning an error message unless this is required by the specification", and this feels borderline offensive. Any programmer who has banged their head on the wall when something fails silently will know what I mean. So, am I completely wrong about this? Should my program be lenient in what it accepts and swallow errors silently? Or am I mis-interpreting what this is supposed to mean? The original question said "program", and I take everyone's point about that. It can make sense for programs to be lenient. What I really meant, however, is APIs: interfaces exposed to other programs, rather than people. HTTP is an example. The protocol is an interface that only other programs use. People never directly provide the dates that go into headers like "If-Modified-Since". So, the question is: should the server implementing a standard be lenient and allow dates in several other formats, in addition to the one that's actually required by the standard? I believe the "be lenient" is supposed to apply to this situation, rather than human interfaces. If the server is lenient, it might seem like an overall improvement, but I think in practice it only leads to client implementations that end up relying on the leniency and thus failing to work with another server that's lenient in slightly different ways. So, should a server exposing some API be lenient or is that a very bad idea? Now onto lenient handling of user input. Consider YouTrack (a bug tracking software). It uses a language for text entry that is reminiscent of Markdown. Except that it's "lenient". For example, writing - foo - bar - baz is not a documented way of creating a bulleted list, and yet it worked. Consequently, it ended up being used a lot throughout our internal bugtracker. Next version comes out, and this lenient feature starts working slightly differently, breaking a bunch of lists that (mis)used this (non)feature. The documented way to create bulleted lists still works, of course. So, should my software be lenient in what user inputs it accepts?

  Read the article

• What economic books would you suggest for learning about economic valuation of goods and simulations thereof?

  - by Rushyo

  I'm looking to create an economic model for a game based on goods created procedurally. Every natural resource and produced good would be procedurally generated, with certain goods being assigned certain uses. Fakesium might be used for the production of Weapon A and produced from Fakesium factories which use Dilithium and Widgets as reagents, where Widgets are also the product of Foo and Bar The problem is not creating the resources and their various production utlities - but getting the game's AI empires and merchants to (Addendum: somewhat) correctly value the goods according to their scarcity, utility and production costs. I need to create a simulation of goods which allows the various game factions to assign a common value denominator (credits) to each resource, depending on how much its worth to that empire. I see the simulation being something like: "I have a high requirement for Weapon A. Since I don't have much of Fakesium, which is needed for Weapon A - I must have a high demand for Fakesium. If I can acquire Fakesium, devalue it. If not, increase its value - and also increase demand for Dilithium and Widgets too." This is very naive - because it may be much much cheaper for the empire to simply purchase Dilithium and Widgets directly rather than purchasing Fakesium, for example. Another example is two resources might allow the creation of Weapon A (Fakesium and Lieron), so we'd need to consider that. I've been scratching my head over the problem and it keeps growing. By the time the player joins the world, I'd expect enough iterations of this process to have occurred that prices would have largely normalised - and would then only trigger rarely to compensate for major changes (eg. if the player blows up the world's only Foo mine!) Could anyone suggest resources (books, largely) which outline this style of modelling, preferably in the context of simulations? Since this problem would never occur outside fantasy worlds, I figured this is probably the most likely place to find people who have encountered similar problems and I'm sure there's people who know of good places for Games Developers to start looking at less specific economic theory too. Additionally, does anyone know of any developers with blogs whose games or research applications perform similar modelling? EDIT: I think I should underline that I'm not looking for optimal solutions. I'm looking to make the actors impulsive - making rudimentary decisions based on fuzzy inputs about what they care about or don't. I'm aiming to understand the problem area better not derive answers. All the textbooks I've found seem to be about real-world economics or how to solve complex theoretical problems, neither of which are terribly relevant to the actor's decision making.

  Read the article

• How to Add a Business Card Image to a Signature in Outlook 2013 Without the vCard (.vcf) File

  - by Lori Kaufman

  When you add a business card to a signature, an image of the business card is inserted into the signature and the vCard (.vcf) file is attached. If you don’t want to attach the vCard file, you can insert the image only into your signature. To insert only the image of your business card without the .vcf file, click People on the Navigation Bar at the bottom of the Outlook window. To get a business card image we can use, we must view the contacts in any form other than People, so we can open the full contact editing window. To do this, click on a different view in the Current View section of the Home tab. We chose to view our contacts in the Business Card format. Double-click on your contact in the current view. The full contact editing window displays with an image of the business card on the right. Right-click on the business card image and select Copy Image from the popup menu. To close the contact editing window, click the File tab and click Close in the menu list on the left. NOTE: You can also click the X in the upper, right corner of the contact editing window to close it. To open the signature editor, click the File tab. Click Options in the menu list on the left side of the Account Information screen. On the Outlook Options dialog box, click Mail in the list of options on the left side of the dialog box. On the Mail screen, click Signatures in the Compose messages section. NOTE: You can also access the Signatures and Stationery dialog box from the Message window for new emails and drafts. Click New Email on the Home tab or double-click an email in the Drafts folder to access the Message window. For more information, see our article about assigning a default signature. In the signature editor, right-click and select Paste from the popup menu. The image is inserted into the signature. You can also use this method to copy a business card image for use in other documents and programs. It’s also possible to insert the vCard (.vcf) file into a signature without the image. We’ll cover that topic tomorrow.     

  Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >