Search Results

Search found 30203 results on 1209 pages for 'public sector'.

Page 283/1209 | < Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >

• Deployment of broadband network

  - by sthustfo

  Hi all, My query is related to broadband network deployment. I have a DSL modem connection provided by my operator. Now the DSL modem has a built-in NAT and DHCP server, hence it allocates IP addresses to any client devices (laptops, PC, mobile) that connect to it. However, the DSL modem also gets a public IP address X that is provisioned by the operator. My question is Whether this IP address X provisioned by operator is an IP address that is directly on the public Internet? Is it likely (practical scenario) that my broadband operator will put in one more NAT+DHCP server and provide IP addresses to all the modems within his broadband network. In this case, the IP addresses allotted to the modem devices will not be directly on the public Internet. Thanks in advance.

  Read the article

• Bridge and OpenVPN with shorewall

  - by Javier Martinez

  I have this scenario and everything it's working OK, but I want to configure my Shorewall and I can't do it. My interfaces are: br0 (bridge of eth0) tun0 (OpenVPN) vnet* (each one of bridged interfaces with public IP's) Public Main IP: 188.165.X.Y OpenVPN IP's: 172.28.0.x Bridge: public ip's So, I have the next configuration for shorewall: /etc/shorewall/zones #ZONE TYPE OPTIONS IN OUT # OPTIONS OPTIONS fw firewall inet ipv4 road ipv4 /etc/shorewall/interfaces #ZONE INTERFACE BROADCAST OPTIONS inet br0 detect routeback road tun+ detect routeback /etc/shorewall/policy #SOURCE DEST POLICY LOG LIMIT: CONNLIMIT: # LEVEL BURST MASK $FW all ACCEPT inet $FW DROP info road all DROP inet road DROP /etc/shorewall/tunnels #TYPE ZONE GATEWAY GATEWAY # ZONE openvpnserver:1194 inet 0.0.0.0/0 The problem is that even with shorewall running I am able to ping or connect to the virtual machines behind the bridge

  Read the article

• What happens when a flash drive wears out?

  - by endolith

  Flash memory has a limited number of read/write cycles, after which it fails. What happens when it fails? Is it like a hard drive, where a failed write is silently moved to another part of the disk and that sector marked as bad and never used again, without data loss? Are there a limited number of replacement sectors? Do operating systems warn the user in some way?

  Read the article

• HDD Producing high pithched beep noise

  - by POTHEN

  Recently I had an upgrade on one of my PC I added a 512Mb Nvidia Graphic card and 500GB seagate 7200Rpm HDD, Now the new HDD is producing a high pitched squeek/beep i cant really tell and on reboot my XP sector 63 gets corrupted, so I get reboot error. I gave the HDD for replacement but the replaced one too makes the noice, yet the HDD does not produce sound on my gaming rig.

  Read the article

• would a dynamic wan disrupt a static lan?

  - by JohnMerlino

  So I found out that the cable company use the DHCP to assign the public ip address dynamically. So a subscriber's public facing ip address can change during the length of their subscription. Now what if you remove DHCP on a particular computer, which you plan to use as a web server, so that the machine has a static, unchanging IP address. If the public ip address was to change, would this confuse the Network Address Translation (NAT) and cause some sort of disruption? Please answer in layman terms, as I'm still grasping concepts here. thanks.

  Read the article

• How do I set zone priority in Microsoft DNS?

  - by Justin

  I have a standard small network setup (20 users) on Active Directory. All Windows machines have a primary DNS server as the AD and a secondary DNS server as Google PDNS. I want to setup a DNS entry that exists in real DNS but set it up on our DC so that local requests would route this public domain to a local development machine on the network. I setup the zone in DNS which results in the clients resolving the public FQDN to our internal IP. However, sometimes it still resolves to the "real" value (I check by pinging it). Is there some way to give the zone definition in my DC DNS higher priority? Or will the client that has secondary public DNS always at sometimes have a competing entry for this zone?

  Read the article

• network user isolation

  - by seaquest

  My question is for a network with a Linux iptables router gateway. How can it be possible to prevent inter-network traffic of those users. Think this case as a public network, IPs are distributed through linux gw and users are authenticated thru the gateway. We want to protect public users from public users. Network is not wireless and I can not use Wireless AP user isolation. Actually I have a simple method. Subnet the network into /30 mask. Give minimum IP of each subnet to the gateay and ditribute those /30 IPs from the subnet. But this is pretty costly for such an aim. I want to ask for other methods Thanks.

  Read the article

• Windows Server 2008 Software Raid 5 - Data integrity issues

  - by Fopedush

  I've got a server running Windows Server 2008 R2, with a (windows native) software raid-5 array. The array consists of 7x 1TB Western Digital RE3 and RE4 drives. I have offline backups of this array. The problem is this: I noticed a few days ago after copying a large file to the disk that there was an integrity issue with that file - it was a ~12GB file that I had downloaded via uTorrent. After moving it to the raid array, I used uTorrent to relocate the download location, and performed a re-check so I could seed it from that location. The recheck found that only 6308/6310 chunks of the copied file were intact. My next step was to write a quick powershell script that would copy files to the array, while performing a SHA1 hash of the original and resultant files and comparing them. Smaller files (100-1000MB) copied over just fine. When I started copying larger data (~15GB), I found that the hash check failed about 2/3rds of the time. The corrupt files had very, very small inconsistencies - less than .01%. I further eliminated the possibility of networking or client issues by placing this large file on the C:\ of the server, and copying it repeatedly from there to the array, seeing similar results. Copying the data via explorer, powershell, or the standard windows command prompt yield the same results. None of the copies fail or report any problems. The raid array itself is listed as healthy in disk management. After a few experiments, I shut down the server and ran memtest overnight. No errors were detected. A basic run of chkdsk found no problems, but I did not use the /R flag, as I was unsure how that might affect a software raid-5 volume. I next ran Crystal Disk Info to check the smart data on the drives - but found that CDI only detected 5 out of 7 of the disks in the array. I have no idea why. Nevertheless, CDI shows the following "caution" flags on a single one of the drives: 05 199 199 140 000000000001 Reallocated Sectors Count C5 200 200 __0 000000000001 Current Pending Sector Count Which is a little bit alarming, but I don't really know what to do with the information. I hardly feel like one reallocated sector could be causing this. At this point, I'm looking for some guidance on what to do next. I need to determine the cause of this issue, but I'm hesitant to run chkdsk /R or any bootable disk health checkers because I'm afraid they might break the array. I've considered triggering a re-sync of the array, but I'm not actually sure how to do that without doing something silly like manually dropping a disk and then restoring it. Any advice that could help me ferret out the precise cause of this issue would be greatly appreciated.

  Read the article

• What kind of SSL Cert do I need and where do I get it?

  - by chacham15

  I want to have subdomains with SSL within my domain. The main difference is that each subdomain is hosted by a different person with a different public key/private key pair. Let me illustrate with an example: User send his public key and requests subdomain from foo.com User is added and assigned subdomain bar (bar.foo.com). Users public key is stored for future validation against bar.foo.com User goes to bar.foo.com and see's a validated SSL connection. From what I gather, this means that I need to create a CA, which is fine. The problem is that from what I recall, a CA needs a special sort of SSL Cert. How do I go about getting this?

  Read the article

• Software Raid 10 corrupted superblock after dual disk failure, how do I recover it?

  - by Shoshomiga

  I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2, even if I assemble manually with all the device names. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris All 6 disks have the same layout, partition #1 is for raid 1 /boot, partition #2 is for raid 10 far plan, partition #3 is swap, but sda did not have swap enabled EDIT2: This is the output of mdadm --detail /dev/md1 Layout : near=1, far=2 Chunk Size : 64k UUID : a0feff55:2018f8ff:e368bf24:bd0fce41 Events : 0.3112126 Number Major Minor RaidDevice State 0 8 34 0 spare rebuilding /dev/sdc2 1 0 0 1 removed 2 8 18 2 active sync /dev/sdb2 3 8 50 3 active sync /dev/sdd2 4 0 0 4 removed 5 8 82 5 active sync /dev/sdf2 6 8 66 - spare /dev/sde2 EDIT3: I ran ddrescue and it has copied everything from sda except a single 4096 byte sector that I suspect is the raid superblock EDIT4: Here is some more info too long to fit here lshw: http://pastebin.com/2eKrh7nF mdadm --detail /dev/sd[abcdef]1 (raid1): http://pastebin.com/cgMQWerS mdadm --detail /dev/sd[abcdef]2 (raid10): http://pastebin.com/V5dtcGPF dumpe2fs of /dev/sda2 (from the ddrescue cloned drive): http://pastebin.com/sp0GYcJG I tried to recreate md1 based on this info with the command mdadm --create /dev/md1 -v --assume-clean --level=10 --raid-devices=6 --chunk=64K --layout=f2 /dev/sda2 missing /dev/sdc2 /dev/sdd2 missing /dev/sdf2 But I can't mount it, I also tried to recreate it based on my initial mdadm --detail /dev/md1 but it still doesn't mount It also warns me that /dev/sda2 is an ext2fs file system but I guess its because of ddrescue

  Read the article

• How to connect two subnet with Windows Server?

  - by 9dan

  Hello, I have some work to do in a small office. This office has two separate Internet connections. One is a kind of DSL line and connected through the Internet sharing router (DHCP). One is a leased line with public IP adresses (No DHCP). This leased line provide only 30 IP addresses and the gateway is provided by the ISP. Some workers use private IP provided by the router, some workers use manually setup public IP. There is a Windows 2008 R2 server with two NICs, connected to each lines. I want to connect/merge(?)/bridge(?) two subnet with this server so that users from the different subnet can access each other. How can I accomplish this? Something like, add gateway function to this server and public IP users change the gateway to point this server.. It it possible ? Sorry for my rambling. Thanks in advance.

  Read the article

• Overriding Apache auth directive

  - by Machine

  Hi! I'm trying to allow public access to a method that generates a WSDL-file for our API. The rest of the site is behind basic auth protection. Can you guys take a look at the following virtual-host configuration and see why the override does not take place? <VirtualHost *:80> ServerName xyz.mydomain.com DocumentRoot /var/www/dev/public <Directory /var/www/dev/public> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all SetEnv APPLICATION_ENV testing </Directory> <Location /> AuthName "XYZ Development Server" AuthType Basic AuthUserFile /etc/apache2/xyz.passwd Require valid-user </Location> <Location /api/soap/wsdl> Satisfy Any allow from all </Location> </VirtualHost>

  Read the article

• Error configuring virtual hosts

  - by user148351

  i Have a problem using my virtual hosts: When i try to connect to my server on direct ip adress, for example http://111.11.11.111/ in apache error log i see following error: script '/var/www/html/mmm/public/index.php' not found or unable to stat File index.php exists!!! and has correct access rights. I have virtual hosts configured <VirtualHost *:80> DocumentRoot /var/www/html/mmm/public ServerName example.com ServerAlias example.com www.example..com <Directory var/www/html/mmm/public> AllowOverride All </Directory> </VirtualHost> Why when I try to connect to ip address - it try to search index.php not in servers root directory, but in root directory of virtual host.

  Read the article

• How a router decides destination of packet?

  - by user58859

  I have basic networking question. Scenario : Two pc's are communicating on a wan. Both the pc's ate behind routers or modems. My question : Both the pc's have public IP of each other. That public IP is most of the time is either of the router or of the modem. There can be more then one pc's behind those routers and modems. Then how the pc's are communicating. I can understand the packets can reach upto those routers or modems. But what after that. In the packet , destination IP is public IP. Then how the router or modem decides where to send the packet? Can anybody explain me this please. Thanks in advance.

  Read the article

• Outlook keeps dropping 'Other Calendars'

  - by David Gard

  We run Exchnage 2010 with Outlook 2007, and we have public calendars that users are able to 'Add to favorites...' - these are then shown under 'Other Calendars' when a user clicks their 'Calendar' tab. The issue we are having is that these calendars drop off every now and again. Looking under 'Public Folders - Favorites', I can see that the calendars are there, but Outlook doesn't seem to know that they are calendars any more. Simply clicking on one of them to open it changes the icon to that of a 'Folder containing calendar items' for each of the favorite items, and closing and reopening Outlook gets them back under 'Other Calendars' My question is this - how can I make Outlook stop forgetting that these public folders are calendars? Thanks.

  Read the article

• How to confirm Hard disk is perfect no problem?

  - by Jitendra vyas

  How to confirm any SATA/PATA Hard disk is perfect no problem? no bad sector on any other problem. I'm purchasing just 2 month used SATA HDD from a friend in less price. How can i confirm hard disk will work perfectly, current condition is healthy.

  Read the article

• How can I port forward over a VPN NAT?

  - by Charlie

  I have a multi-site VPN currently running with pfSense boxes and currently using OpenVPN. However I can change the OS and VPN type if need be. The main router has a 10.13.0.0/16 subnet and a series of public IPs For example, a branch has a 10.12.1.0/24 subnet How can I port forward NAT traffic on a public IP of the main router to a server behind the NAT of the second? So for instance port 95 on a public IP assigned to the main router forwards to 10.12.1.102 on the other router. Is this even possible? Currently my setup works great but only for intertnal traffic

  Read the article

• Establish connection with an IP camera behind a modem-router assigned with a private IP by Internet Service Provider?

  - by silvernightstar

  Most solutions out there require the modem-router to have been assigned a public IP by the ISP. After which, one can access the IP camera via a portforward setting on the router. However, my ISP only provides private IPs internal to their system (they probably have a limited pool of public IPs). So I am unable to view my IP cameras in the way described. I'm wondering if there's a way to work around this problem without having to need a public IP. Since, after all, two users on Yahoo Messenger or Facebook Chat are able to find one another and exchange data despite both sides being within the internal networks of their respective ISPs. Given that I only plan to view my IP cameras via iOS or Android running on a smartphone or tablet, any ready-to-use solutions out there?

  Read the article

• switch OFF syn cookies

  - by Nick

  We have several servers they have public IP's, but work together (one is with Load Balancer, orther with Apache Web server, other with MySQL and so on. Most of the ports are fire-walled, so only "local" servers can be connect there. However ALL servers have some ports that must be publicly open. We have SYN Cookies enabled and from time to time we got: possible SYN flooding on port 8080. Sending cookies. Port 8080 is not public. How we can switch OFF SYN Cookies for some ports (e.g. 8080, 3306 etc) or from some sources (e.g. our servers), but in same time SYN Cookies to be switched ON for all other ports, e.g. port 80. We found this similar problem, except our servers are with public IP's: SYN cookies on internal machines

  Read the article

• Location Directive in a VirtualHost

  - by Yehia A.Salam

  I'm trying to add server-status location directive under one of my virtual host, however i'm getting a 403 Access Forbidden when browsing to www.mywebsite.com/server-status. Is it legal to put the Location Directive under a virtual host? Edit #1: Full vhost config <VirtualHost *:80> # Admin email, Server Name (domain name) and any aliases ServerAdmin [email protected] ServerName aumento.io ServerAlias www.aumento.io # Index file and Document Root (where the public files are located) DirectoryIndex index.html index.php DocumentRoot /home/cairocubicles/web/aumento.io/public <Directory /home/cairocubicles/web/aumento.io/public> Order Allow,Deny Allow from all Options Indexes FollowSymLinks AllowOverride All AcceptPathInfo On </Directory> <Location /server-status> SetHandler server-status Order deny,allow Deny from all Allow from aumento.io </Location> # Custom log file locations LogLevel warn ErrorLog /home/cairocubicles/web/aumento.io/log/error.log </VirtualHost>

  Read the article

• Automate Win8 network and sharing settings

  - by RafaelBarriola

  I am trying to create a unattended DVD installation of Windows 8, but I can't seem to find a solution do this. What I'm looking for are to have the same settings on the Network and Sharing Center, to have the Turn on network discovery "on" for both the private and guest/public within the Control Panel. For private and guest/public, I need to: Turn on network discovery Turn on printer and file sharing Turn off public folder sharing Turn on password protected sharing Use user accounts and passwords to connect to other computers I've been searching for days and have not found a solution yet.

  Read the article

• local wordpress installation not accessible from the outside world

  - by hello

  I have a working installation of wordpress located in /var/www/html/wordpress It is accessible in my local network at [local-machine-ip]/wordpress/ There is also a test page located in /var/www/html/test.html It is also accessible in my local network at [local-machine-ip] I would like the wordpress website to be accessible from the outside world. I know that my ISP blocks incoming requests on port 80, so I set my router to redirect requests from port 8080 to 80. This feature appears to be working correctly since I can access the test.html page using my public ip address as follows: [public-ip]:8080 However, I cannot access [public-ip]:8080/wordpress Here is my Apache config : <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/html ServerName [my.domain.com] <Directory /var/www/html/> Options FollowSymLinks Indexes MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Thanks!

  Read the article

• Excluding four IP's from a /32 static route

  - by Justin

  I have a Cisco ASA routing a /32 of public addresses (non RFC-1812) through a private link. When the device sees the destination address it selects the private route instead of going out over the public network. This works great but I am now trying to exclude 4 IP's from the private route. Traffic to these addresses should go over the public internet instead of being routed over the private network. Can I just add anothe route for these four IP's or do I have to modify the existing route for the /32?

  Read the article

• how do i use ssh to log into my computer?

  - by tim

  In the past I've been using putty to ssh into my schools fedora computers to do HW, but now I recently put fedora on my computer, and I want make it so that I can ssh to my fedora computer from my school too. I looked through a tutorial, and was able to -make the private key and public key -make a passphrase -move to public key to my school's system -chmod 700 the public key now when I try to ssh into my own computer from school it gives me an error that says I cannot resolve my hostname and name or service unknown I don't know what to do from here, the tutorial was no help after this.

  Read the article

• Full Control Over CD/DVD burning

  - by Hypertext

  Suppose I want to burn just the 6000th byte(if thats not possible say the 10th sector) on a CDR without touching anyother region. Sounds possible but is there any tool to accomplish this. Yeah sure, there may be no clear point doing this but is this possible technically?. (Doesnt matter maintaining the CDFS, integrity or whatever standard here. Just the task.) It would be great to know if there are any software regarding this.

  Read the article

< Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >