Search Results

Search found 16467 results on 659 pages for 'request filtering'.

Page 283/659 | < Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >

• FreeBSD slow transfers - RFC 1323 scaling issue?

  - by Trey

  I think I may be having an issue with window scaling (RFC 1323) and am hoping that someone can enlighten me on what's going on. Server: FreeBSD 9, apache22, serving a static 100MB zip file. 192.168.18.30 Client: Mac OS X 10.6, Firefox 192.168.17.47 Network: Only a switch between them - the subnet is 192.168.16/22 (In this test, I also have dummynet filtering simulating an 80ms ping time on all IP traffic. I've seen nearly identical traces with a "real" setup, with real internet traffic/latency also) Questions: Does this look normal? Is packet #2 specifying a window size of 65535 and a scale of 512? Is packet #5 then shrinking the window size so it can use the 512 scale and still keep the overall calculated window size near 64K? Why is the window scale so high? Here are the first 6 packets from wireshark. For packets 5 and 6 I've included the details showing the window size and scaling factor being used for the data transfer. Code: No. Time Source Destination Protocol Length Info 108 6.699922 192.168.17.47 192.168.18.30 TCP 78 49190 http [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=8 TSval=945617489 TSecr=0 SACK_PERM=1 115 6.781971 192.168.18.30 192.168.17.47 TCP 74 http 49190 [SYN, ACK] Seq=0 Ack=1 Win=65535 Len=0 MSS=1460 WS=512 SACK_PERM=1 TSval=2617517338 TSecr=945617489 116 6.782218 192.168.17.47 192.168.18.30 TCP 66 49190 http [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSval=945617490 TSecr=2617517338 117 6.782220 192.168.17.47 192.168.18.30 HTTP 490 GET /utils/speedtest/large.file.zip HTTP/1.1 118 6.867070 192.168.18.30 192.168.17.47 TCP 375 [TCP segment of a reassembled PDU] Details: Transmission Control Protocol, Src Port: http (80), Dst Port: 49190 (49190), Seq: 1, Ack: 425, Len: 309 Source port: http (80) Destination port: 49190 (49190) [Stream index: 4] Sequence number: 1 (relative sequence number) [Next sequence number: 310 (relative sequence number)] Acknowledgement number: 425 (relative ack number) Header length: 32 bytes Flags: 0x018 (PSH, ACK) Window size value: 130 [Calculated window size: 66560] [Window size scaling factor: 512] Checksum: 0xd182 [validation disabled] Options: (12 bytes) No-Operation (NOP) No-Operation (NOP) Timestamps: TSval 2617517423, TSecr 945617490 [SEQ/ACK analysis] TCP segment data (309 bytes) Note: originally posted http://forums.freebsd.org/showthread.php?t=32552

  Read the article

• Listing group members using ldapsearch

  - by colemanm

  Our corporate LDAP directory is housed on a Snow Leopard Server Open Directory setup. I'm trying to use the ldapsearch tool to export an .ldif file to import into another external LDAP server to authenticate with externally; basically trying to be able to use the same credentials internally and externally. I've got ldapsearch working and giving me the contents and attributes of everything in the "Users" OU, and even filtering down to only the attributes I need: ldapsearch -xLLL -H ldap://server.domain.net / -b "cn=users,dc=server,dc=domain,dc=net" objectClass / uid uidNumber cn userPassword > directorycontents.ldif That gives me a list of users and properties that I can import to my remote OpenLDAP server. dn: uid=username1,cn=users,dc=server,dc=domain,dc=net objectClass: inetOrgPerson objectClass: posixAccount objectClass: organizationalPerson uidNumber: 1000 uid: username1 userPassword:: (hashedpassword) cn: username1 However, when I try the same query on an OD "group" instead of a "container," the results are something like this: dn: cn=groupname,cn=groups,dc=server,dc=domain,dc=net objectClass: posixGroup objectClass: apple-group objectClass: extensibleObject objectClass: top gidNumber: 1032 cn: groupname memberUid: username1 memberUid: username2 memberUid: username3 What I really want is a list of users from the top example filtered based on their group memberships, but it looks like membership is set from the Group side, rather than the user account side. There must be a way to filter this down and only export what I need, right?

  Read the article

• jQuery autocomplete for dynamically created inputs

  - by Jamatu

  Hi all! I'm having an issue using jQuery autocomplete with dynamically created inputs (again created with jQuery). I can't get autocomplete to bind to the new inputs. Autocomplete $("#description").autocomplete({ source: function(request, response) { $.ajax({ url: "../../works_search", dataType: "json", type: "post", data: { maxRows: 15, term: request.term }, success: function(data) { response($.map(data.works, function(item) { return { label: item.description, value: item.description } })) } }) }, minLength: 2, }); New table row with inputs var i = 1; var $table = $("#works"); var $tableBody = $("tbody",$table); $('a#add').click(function() { var newtr = $('<tr class="jobs"><td><input type="text" name="item[' + i + '][quantity]" /></td><td><input type="text" id="description" name="item[' + i + '][works_description]" /></td></tr>'); $tableBody.append(newtr); i++; }); I'm aware that the problem is due to the content being created after the page has been loaded but I can't figure out how to get around it. I've read several related questions and come across the jQuery live method but I'm still in a jam! Any advice?

  Read the article

• Controlling ASP.NET output cache memory usage

  - by Josh Einstein

  I would like to use output caching with WCF Data Services and although there's nothing specifically built in to support caching, there is an OnStartProcessingRequest method that allows me to hook in and set the cacheability of the request using normal ASP.NET mechanisms. But I am worried about the worker process getting recycled due to excessive memory consumption if large responses are cached. Is there a way to specify an upper limit for the ASP.NET output cache so that if this limit is exceeded, items in the cache will be discarded? I've seen the caching configuration settings but I get the impression from the documentation that this is for explicit caching via the Cache object since there is a separate outputCacheSettings which has no memory-related attributes. Here's a code snippet from Scott Hanselman's post that shows how I'm setting the cacheability of the request. protected override void OnStartProcessingRequest(ProcessRequestArgs args) { base.OnStartProcessingRequest(args); //Cache for a minute based on querystring HttpContext context = HttpContext.Current; HttpCachePolicy c = HttpContext.Current.Response.Cache; c.SetCacheability(HttpCacheability.ServerAndPrivate); c.SetExpires(HttpContext.Current.Timestamp.AddSeconds(60)); c.VaryByHeaders["Accept"] = true; c.VaryByHeaders["Accept-Charset"] = true; c.VaryByHeaders["Accept-Encoding"] = true; c.VaryByParams["*"] = true; }

  Read the article

• Implementing the tree with reference to the root for each leaf

  - by AntonAL

  Hi, i implementing a products catalog, that looks, like this: group 1 subgroup 1 subgroup 2 item 1 item 2 ... item n ... subgroup n group 2 subgroup 1 ... subgroup n group 3 ... group n The Models: class CatalogGroup < ActiveRecord::Base has_many: catalog_items has_many :catalog_items_all, :class_name => "CatalogItem", :foreign_key => "catalog_root_group_id" end class CatalogItem < ActiveRecord::Base belongs_to :catalog_group belongs_to :catalog_root_group, :class_name => "CatalogGroup" end Migrations: class CreateCatalogItems < ActiveRecord::Migration def self.up create_table :catalog_items do |t| t.integer :catalog_group_id t.integer :catalog_root_group_id t.string :code t.timestamps end end For convenience, i referenced each CatalogItem to it's top-most CatalogGroup and named this association "catalog_root_group". This will give us the simple implementation of search request, like "show me all items in group 1". We will have a deal only with CatalogModel.catalog_root_group The problem is - this association does't work. I always get "catalog_root_group" equals to nil Also, i have tried to overcome the using of reference to root group ("catalog_root_group"), but i cannot construct appropriate search request in ruby ... Do you know, how to do it ?

  Read the article

• CryptSvc not matched by Windows 7 Firewall rule

  - by theultramage

  I am using Windows Firewall in conjunction with a third-party tool to get notified about new outbound connection attempts (Windows Firewall Notifier or Windows Firewall Control). The way these tools do it is by setting the firewall to deny by default, and to add an auditing policy to log blocked connections into the Security event log. Then they watch the log, and display notification about newly added entries. netsh advfirewall set allprofiles firewallpolicy blockinbound,blockoutbound auditpol /set /subcategory:{0CCE9226-69AE-11D9-BED3-505054503030} /failure:enable With this configuration in place, I now need to craft outbound allow rules for applications and system services. Here is the rule for CryptSvc, the service frequently used for certificate validation and revocation checking: netsh advfirewall firewall add rule name="Windows Cryptographic Services" action=allow enable=yes profile=any program="%SystemRoot%\system32\svchost.exe" service="CryptSvc" dir=out protocol=tcp remoteport=80,443 The problem is, this rule does not work. Unless I change the scope to "all programs and services" (which is really unhealthy), connection denied events like the following will keep appearing in the security log: Event 5157, Microsoft Windows security auditing. The Windows Filtering Platform has blocked a connection. Application Information: Process ID: 1476 (<- svchost.exe with CryptSvc and nothing else) Application Name: \device\harddiskvolume1\windows\system32\svchost.exe Network Information: Direction: Outbound Source Address: 192.168.0.1 Source Port: 49616 Destination Address: 2.16.52.16 Destination Port: 80 Protocol: 6 (<- TCP) To make sure it's CryptSvc, I have let the connection through and reviewed its traffic; I also configured CryptSvc to run in its own svchost instance to make it more obvious: ;sc config CryptSvc type= share sc config CryptSvc type= own So... why is it not matching the firewall rule, and how to fix that?

  Read the article

• HTB.init / tc behind NAT

  - by Ben K.

  I have an Ubuntu 10 box that I'm trying to set up as a bandwidth-shaping router. The machine has one WAN interface, eth0 and two LAN interfaces, eth1 and eth2. NAT is configured using MASQUERADE as described at InternetConnectionSharing. I'm mostly concerned with shaping outbound traffic from the LAN interfaces -- in the end, I'd like to end up with a hard 768Kbps limit per-LAN-interface (rather than a limit on eth0 pooled across all interfaces). I installed HTB.init, and riffing on the examples, tried to set this up on eth1 by putting three files into /etc/sysconfig/htb: /etc/sysconfig/htb/eth1 DEFAULT=30 R2Q=100 /etc/sysconfig/htb/eth1-2.root RATE=768Kbps BURST=15k /etc/sysconfig/htb/eth1-2:30.dfl RATE=768Kbps CEIL=788Kbps BURST=15k LEAF=sfq I can /etc/init.d/htb start and /etc/init.d/htb stats and see information that /seems/ to suggest it's working...but when I try pulling a large file via the WAN interface the shaping clearly isn't in effect. Any suggestions? My guess is it has something to do with where the shaping falls in the NAT chain, but I really have no idea where to begin troubleshooting this. ---- Update: Here's my /etc/init.d/htb list output, it seems to make sense -- the default rate for eth1 is 768Kbps? ### eth0: queueing disciplines qdisc htb 1: root refcnt 2 r2q 100 default 30 direct_packets_stat 0 qdisc sfq 30: parent 1:30 limit 127p quantum 1514b perturb 10sec ### eth0: traffic classes class htb 1:2 root rate 768000bit ceil 768000bit burst 1599b cburst 1599b class htb 1:30 parent 1:2 leaf 30: prio 0 rate 6144Kbit ceil 6144Kbit burst 15Kb cburst 1598b ### eth0: filtering rules filter parent 1: protocol ip pref 100 u32 filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:30 match 00000000/00000000 at 12 match 00000000/00000000 at 16 ### eth1: queueing disciplines qdisc htb 1: root refcnt 2 r2q 100 default 30 direct_packets_stat 0 qdisc sfq 30: parent 1:30 limit 127p quantum 1514b perturb 10sec ### eth1: traffic classes class htb 1:2 root rate 768000bit ceil 768000bit burst 1599b cburst 1599b class htb 1:30 parent 1:2 leaf 30: prio 0 rate 6144Kbit ceil 6144Kbit burst 15Kb cburst 1598b

  Read the article

• Some URLs fail to load on Windows web portal

  - by jpolache

  I’m working in a large data center and have been assigned to troubleshoot and issue with a windows (IIS) web server that acts as a portal for a customer of the data center. This portal server is on a DMZ at the local data center. I don’t have access to the portal desktop and am relying on an off-site administrator to work with me to do testing and report the condition of the portal. He tells me there are no software firewalls or other filtering configured. While most of the remote web pages work fine, several of the URSs the portal is suppose to serve up fail to load. I had wireshark installed on the portal system and had a capture taken of one of the failures. I used IE to access one of the remote web servers at issue. I could see the TCP SYN-ACK coming back from the remote server, but after several HTTP GETs fail to get a response the portal server sends a reset. The webmaster of the remote web server assures me that no sites are being blocked. I had a capture taken outside the local firewall, so there should be no issue there. Another tech set up a laptop and used the IP address of the portal (we took the portal off-line for the test). The laptop loads the URL as expected. I tried having Firefox loaded to make sure that the HTTP GET was not mal-formed. Same failure as with IE. So, it seems it is not the remote web server or the network, because there was no problem with the laptop. At this point, I’m not sure what other questions to ask or tests to do.

  Read the article

• Problem with detecting the value of the drop down list on the server (servlet) side

  - by Harry Pham

  Client code is pretty simple: <form action="DDServlet" method="post"> <input type="text" name="customerText"> <select id="customer"> <option name="customerOption" value="3"> Tom </option> <option name="customerOption" value="2"> Harry </option> </select> <input type="submit" value="send"> </form> Here is the code on the Servlet Enumeration paramNames = request.getParameterNames(); while(paramNames.hasMoreElements()){ String paramName = (String)paramNames.nextElement(); //get the next element System.out.println(paramName); } When I print out, I only see, customerText, but not customerOption. Any idea why guys? What I hope is, if I select Tom in my option, once I submit, on my servlet I should able to do this: String paramValues[] = request.getParameterValues(paramName); and get back value of 3

  Read the article

• SCM8014 to FVS338

  - by Jack

  I have a SMC8014 Router/Modem that Comcast provided me with their business class service. It was not filtering malicious traffic as aggressively as I had hoped, so I purchased a NetGear ProSafe FVS338, and put this behind the SMC8014, and all my machines behind that. After some brief configuration, all machines can see out to the internet. I also have a single web server, and I have not been able to configure things so that incoming requests can reach it. This is where I need help! I would like to have the FVS339 do NAT, so that I can assign a 192.168 address to my webserver. I've tried everything I know of, and I can't get things going. I set the SMC8014 to have a LAN facing IP of 10.0.0.1, and I assigned the FVS339 a WAN facing IP of 10.0.0.2. I would like to be able to tell the SMC8014 to just forward all traffic to 10.0.0.2, but I haven't had any success. In my (unfortunately limited) understanding, what I probably want here is a static route, but I don't know how to cofigure one, or if this is really what I want. The SMC8014 wants a Destination IP, a Subnet Mask and a Gateway IP. Any help would be appreciated.

  Read the article

• Passing JSON object from Controller to View(jsp)

  - by user752233

  I am trying to send JSON object to my view from controller but unable to send it. Please help me out! I am using following code public class SystemController extends AbstractController{ protected ModelAndView handleRequestInternal(HttpServletRequest request, HttpServletResponse response) throws Exception { ModelAndView mav = new ModelAndView("SystemInfo", "System", "S"); response.setContentType("application/json;charset=UTF-8"); response.setHeader("Cache-Control", "no-cache"); JSONObject jsonResult = new JSONObject(); jsonResult.put("JVMVendor", System.getProperty("java.vendor")); jsonResult.put("JVMVersion", System.getProperty("java.version")); jsonResult.put("JVMVendorURL", System.getProperty("java.vendor.url")); jsonResult.put("OSName", System.getProperty("os.name")); jsonResult.put("OSVersion", System.getProperty("os.version")); jsonResult.put("OSArchitectire", System.getProperty("os.arch")); response.getWriter().write(jsonResult.toString()); // response.getWriter().close(); return mav; // return modelandview object } } and in the view side I am using <script type="text/javascript"> Ext.onReady(function(response) { //Ext.MessageBox.alert('Hello', 'The DOM is ready!'); var showExistingScreen = function () { Ext.Ajax.request({ url : 'system.htm', method : 'POST', scope : this, success: function ( response ) { alert('1'); var existingValues = Ext.util.JSON.decode(response.responseText); alert('2'); } }); }; return showExistingScreen(); });

  Read the article

• UnicodeDecodeError on attempt to save file through django default filebased backend

  - by Ivan Kuznetsov

  When i attempt to add a file with russian symbols in name to the model instance through default instance.file_field.save method, i get an UnicodeDecodeError (ascii decoding error, not in range (128) from the storage backend (stacktrace ended on os.exist). If i write this file through default python file open/write all goes right. All filenames in utf-8. I get this error only on testing Gentoo, on my Ubuntu workstation all works fine. class Article(models.Model): file = models.FileField(null=True, blank=True, max_length = 300, upload_to='articles_files/%Y/%m/%d/') Traceback: File "/usr/lib/python2.6/site-packages/django/core/handlers/base.py" in get_response 100. response = callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python2.6/site-packages/django/contrib/auth/decorators.py" in _wrapped_view 24. return view_func(request, *args, **kwargs) File "/var/www/localhost/help/wiki/views.py" in edit_article 338. new_article.file.save(fp, fi, save=True) File "/usr/lib/python2.6/site-packages/django/db/models/fields/files.py" in save 92. self.name = self.storage.save(name, content) File "/usr/lib/python2.6/site-packages/django/core/files/storage.py" in save 47. name = self.get_available_name(name) File "/usr/lib/python2.6/site-packages/django/core/files/storage.py" in get_available_name 73. while self.exists(name): File "/usr/lib/python2.6/site-packages/django/core/files/storage.py" in exists 196. return os.path.exists(self.path(name)) File "/usr/lib/python2.6/genericpath.py" in exists 18. st = os.stat(path) Exception Type: UnicodeEncodeError at /edit/ Exception Value: ('ascii', u'/var/www/localhost/help/i/articles_files/2010/03/17/\u041f\u0440\u0438\u0432\u0435\u0442', 52, 58, 'ordinal not in range(128)')

  Read the article

• PF, load balanced gateways, and Squid

  - by Santa

  Hi, So I have a FreeBSD router running PF and Squid, and it has three network interfaces: two connected to upstream providers (em0 and em1 respectively), and one for LAN (re0) that we serve. There is some load balancing configured with PF. Basically, it routes all traffic to ports 1-1024 through one interface (em0) and everything else through the other (em1). Now, I have a Squid proxy also running on the box that transparently redirects any HTTP request from LAN to port 3128 in 127.0.0.1. Since Squid redirects this request to HTTP outside, it should follow the load balancing rule through em0, no? The problem is, when we tested it out (by browsing from a computer in the LAN to http://whatismyip.com, it reports the external IP of the em1 interface! When we turn Squid off, the external IP of em0 is reported, as expected. How do I make Squid behave with the load balancing rule that we have set up? Here's the related settings in /etc/pf.conf that I have: ext_if1="em1" # DSL ext_if2="em0" # T1 int_if="re0" ext_gw1="x.x.x.1" ext_gw2="y.y.y.1" int_addr="10.0.0.1" int_net="10.0.0.0/16" dsl_ports = "1024:65535" t1_ports = "1:1023" ... squid=3128 rdr on $int_if inet proto tcp from $int_net \ to any port 80 -> 127.0.0.1 port $squid pass in quick on $int_if route-to lo0 inet proto tcp \ from $int_net to 127.0.0.1 port $squid keep state ... # load balancing pass in on $int_if route-to ($ext_if1 $ext_gw1) \ proto tcp from $int_net to any port $dsl_ports keep state pass in on $int_if route-to ($ext_if1 $ext_gw1) \ proto udp from $int_net to any port $dsl_ports pass in on $int_if route-to ($ext_if2 $ext_gw2) \ proto tcp from $int_net to any port $t1_ports keep state pass in on $int_if route-to ($ext_if2 $ext_gw2) \ proto udp from $int_net to any port $t1_ports Thanks!

  Read the article

• ASP.NET Web API returns 404 for PUT only on some servers

  - by Greg Bacchus

  Ok, I have been racking my brain and the internet for a solution to this. I just can't figure it out. I have written a site that uses ASP.NET MVC Web API and all working nicely until I put it on staging server. The site works fine on my local machine and the dev web server. Both dev and staging servers are Win Server 2008 R2. The problem is this: basically the site works, but there are some API calls that use the HTTP PUT method. These fail on staging returning a 404, but work fine elsewhere. The first problem that I came across and fixed was in Request Filtering. But still getting the 404. I have turned on tracing in IIS and get the following problem. 168. -MODULE_SET_RESPONSE_ERROR_STATUS ModuleName IIS Web Core Notification 16 HttpStatus 404 HttpReason Not Found HttpSubStatus 0 ErrorCode 2147942402 ConfigExceptionInfo Notification MAP_REQUEST_HANDLER ErrorCode The system cannot find the file specified. (0x80070002) The configs are the same on dev and staging, matter of fact the whole site is a direct copy. Why would the GETs and POSTs work, but not the PUTs? Thanks Greg

  Read the article

• Is it possible to use OAuth starting from the service provider website?

  - by Brian Armstrong

  I want to let people create apps that use my API and authenticate them with OAuth. Normally this process starts from the consumer service website (say TwitPic) and they request an access token from the service provider (Twitter). The user is then taken to the service provider website where they have to allow/deny access to to the consumer. I'm wondering if it's possible to initiate this process from the service provider website instead. So in this example you would start on Twitter's site, and maybe there is a section marked "do you want to turn on access for TwitPic?". If you click yes, it passes the access token directly to TwitPic which now has access to your account. Basically, fewer steps. I'm looking at the OAuth docs and it looks like the request token is generated on the consumer side and used later to turn it into an access token. So it's not really designed with what I described above in mind, but I thought there might be a way. http://oauth.net/core/1.0/ (Search for "steps") Thanks!

  Read the article

• Destroying nested resources in restful way

  - by Alex

  I'm looking for help destroying a nested resource in Merb. My current method seems near correct, but the controller raise an InternalServerError during the destruction of the nested object. Here comes all the details concerning the request, don't hesitate to ask for more :) Thanks, Alex I'm trying to destroy a nested resources using the following route in router.resources :events, Orga::Events do |event| event.resources :locations, Orga::Locations end Which gives in jQuery request (delete_ method is a implementation of $.ajax with "DELETE"): $.delete_("/events/123/locations/456"); In the Location controller side, I've got: def delete(id) @location = Location.get(id) raise NotFound unless @location if @location.destroy redirect url(:orga_locations) else raise InternalServerError end end And the log: merb : worker (port 4000) ~ Routed to: {"format"=>nil, "event_id"=>"123", "action"=>"destroy", "id"=>"456", "controller"=>"letsmotiv/locations"} merb : worker (port 4000) ~ Params: {"format"=>nil, "event_id"=>"123", "action"=>"destroy", "id"=>"456", "controller"=>"letsmotiv/locations"} ~ (0.000025) SELECT `id`, `class_type`, `name`, `prefix`, `type`, `capacity`, `handicap`, `export_name` FROM `entities` WHERE (`class_type` IN ('Location') AND `id` = 456) ORDER BY `id` LIMIT 1 ~ (0.000014) SELECT `id`, `streetname`, `phone`, `lat`, `lng`, `country_region_city_id`, `location_id`, `organisation_id` FROM `country_region_city_addresses` WHERE `location_id` = 456 ORDER BY `id` LIMIT 1 merb : worker (port 4000) ~ Merb::ControllerExceptions::InternalServerError - (Merb::ControllerExceptions::InternalServerError)

  Read the article

• Connection details & timeouts in a java web service client

  - by f1sh

  Hello fellow Coders, I have to implement a webservice client to a given WSDL file. I used the SDK's 'wsimport' tool to create Java classes from the WSDL as well as a class that wrap's the webservice's only method (enhanceAddress(auth, param, address)) into a simple java method. So far, so good. The webservice is functional and returning results correcty. The code looks like this: try { EnhancedAddressList uniservResponse = getWebservicePort().enhanceAddress(m_auth, m_param, uniservAddress); //Where the Port^ is the HTTP Soap 1.2 Endpoint }catch (Throwable e) { throw new AddressValidationException("Error during uniserv webservice request.", e); } The Problem now: I need to get Information about the connection and any error that might occur in order to populate various JMX values (such as COUNT_READ_TIMEOUT, COUNT_CONNECT_TIMEOUT, ...) Unfortunately, the method does not officially throw any Exceptions, so in order to get details about a ConnectException, i need to use getCause() on the ClientTransportException that will be thrown. Even worse: I tried to test the read timeout value, but there is none. I changed the service's location in the wsdl file to post the request to a php script that simply waits forever and does not return. Guess what: The web service client does not time out but waits forever as well (I killed the app after 30+ minutes of waiting). That is not an option for my application as i eventually run out of tcp connections if some of them get 'stuck'. The enhanceAddress(auth, param, address) method is not implemented but annotated with javax.jws.* Annotations, meaning that i cannot see/change/inspect the code that is actually executed. Do i have any option but to throw the whole wsimport/javax.jsw-stuff away and implement my own soap client?

  Read the article

• Updated MVC 4 to 5.2.0 via Nuget Site compiles but wont run

  - by hjavaher

  I had the bright idea of updating my perfectly working ASP.Net MVC 4 application to the MVC 5 via nuget, Everything compiles just fine but when I try to run the application I get the following yellow screen of death. Has anyone gotten this or know how to solve it? I've searched for it and couldn't find any solutions. Please let me know if there is any farther information that would help you that I can give you. Attempt by security transparent method 'WebMatrix.WebData.PreApplicationStartCode.Start()' to access security critical method 'System.Web.WebPages.Razor.WebPageRazorHost.AddGlobalImport(System.String)' failed. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.MethodAccessException: Attempt by security transparent method 'WebMatrix.WebData.PreApplicationStartCode.Start()' to access security critical method 'System.Web.WebPages.Razor.WebPageRazorHost.AddGlobalImport(System.String)' failed. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [MethodAccessException: Attempt by security transparent method 'WebMatrix.WebData.PreApplicationStartCode.Start()' to access security critical method 'System.Web.WebPages.Razor.WebPageRazorHost.AddGlobalImport(System.String)' failed.] WebMatrix.WebData.PreApplicationStartCode.Start() +112 [InvalidOperationException: The pre-application start initialization method Start on type WebMatrix.WebData.PreApplicationStartCode threw an exception with the following error message: Attempt by security transparent method 'WebMatrix.WebData.PreApplicationStartCode.Start()' to access security critical method 'System.Web.WebPages.Razor.WebPageRazorHost.AddGlobalImport(System.String)' failed..] System.Web.Compilation.BuildManager.InvokePreStartInitMethodsCore(ICollection`1 methods, Func`1 setHostingEnvironmentCultures) +556 System.Web.Compilation.BuildManager.InvokePreStartInitMethods(ICollection`1 methods) +132 System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +102 System.Web.Compilation.BuildManager.ExecutePreAppStart() +153 System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +516 [HttpException (0x80004005): The pre-application start initialization method Start on type WebMatrix.WebData.PreApplicationStartCode threw an exception with the following error message: Attempt by security transparent method 'WebMatrix.WebData.PreApplicationStartCode.Start()' to access security critical method 'System.Web.WebPages.Razor.WebPageRazorHost.AddGlobalImport(System.String)' failed..] System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +9885060 System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +101 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +254

  Read the article

• Passing custom Python objects to nosetests

  - by Rob

  I am attempting to re-organize our test libraries for automation and nose seems really promising. My question is, what is the best strategy for passing Python objects into nose tests? Our tests are organized in a testlib with a bunch of modules that exercise different types of request operations. Something like this: testlib \-testmoda \-testmodb \-testmodc In some cases the test modules (i.e. testmoda) is nothing but test_something(), test_something2() functions while in some cases we have a TestModB class in testmob with the test_anotherthing1(), test_anotherthing2() functions. The cool thing is that nose easily finds both. Most of those test functions are request factory stuff that can easily share a single connection to our server farm. Thus we do a lot of test_something1(cnn), TestModB.test_anotherthing2(cnn), etc. Currently we don't use nose, instead we have a hodge-podge of homegrown driver scripts with hard-coded lists of tests to execute. Each of those driver scripts creates its own connection object. Maintaining those scripts and the connection minutia is painful. I'd like to take free advantage of nose's beautiful discovery functionality, passing in a connection object of my choosing. Thanks in advance! Rob P.S. The connection objects are not pickle-able. :(

  Read the article

• How to remap IPs visible from local machine to IPs visible from a machine I have SSH access to?

  - by gooli

  I'm so far out of my depth I don't even know what to google for. There's a server I can connect to via SSH. Via that server I can access other server on its subnet via SSH. What I want to do is be able to access the machines that server has access to directly. Say the server IP is 192.168.7.7 and is the only one in the 192.168.x.x range I have access to. I'd like to configure things in such a way that when I to access say 192.168.7.100 on my machine, the connection will go through an SSH tunnel I open to 192.168.7.7 and out to 192.168.7.100. I would like this to work for any port if at all possible. I know I can set an HTTP proxy and even a SOCKS proxy, but I'm wondering is there is a way to actually remap some of the IP my machine sees to IP only visible from the remote machine. What would this configuration be called? IS this NAT, VPN, IP2IP or something else? How can I set up this on a Windows client box that connects via SSH to a Linux box? Sounds to me like I need to set up some kind of filtering on the network driver or possibly a virtual NIC, but I'm not sure where to go next.

  Read the article

• ASP.NET MVC and NHibernate coupling

  - by Ben

  I have just started learning NHibernate. Over the past few months I have been using IoC / DI (structuremap) and the repository pattern and it has made my applications much more loosely coupled and easier to test. When switching my persistence layer to NHibernate I decided to stick with my repositories. Currently I am creating a new session on each method call but of course this means that I can not benefit from lazy loading. Therefore I wish to implement session-per-request but in doing so this will make my web project dependent on NHibernate (perhaps this is not such a bad thing?). I was planning to inject ISession into my repositories and create and dispose sessions on beginrequest/endrequest events (see http://ayende.com/Blog/archive/2009/08/05/do-you-need-a-framework.aspx) Is this a good approach? Presumably I cannot use session-per-request without having a reference to NHibernate in my web project? Having the web project dependent on NHibernate prompts my next (few) questions - why even bother with the repository? Since my web app is calling services that talk to the repositories, why not ditch the repositories and just add my NHibernate persistance code inside the services? And finally, is there really any need to split out into so many projects. Is a web project and an infrastructure project sufficient? I realise that I have veered off a bit from my original question but it seems that everyone seems to have their own opinion on these topics. Some people use the repository pattern with NHibernate, some don't. Some people stick their mapping files with the related classes, others have a separate project for this. Many thanks, Ben

  Read the article

• Browser security when calling HTTP assets via a SWF on a HTTPS site

  - by Mark Ursino

  We have a site that runs on HTTPS and needs to pull in various JS assets to run a video player on the page. We get a browser security warning on this page because the JS files we are externally calling are being accessed via HTTP, not HTTPS. E.g. // HTTP reference on a HTTPS site <script src="http://the-cdn.tld/player.js"></script> Simply accessing this one JS assets via HTTP and not HTTPS will cause the browser security warning which we need to get rid of. The provider of the JS file does not support an HTTPS equivalent (like Google Analytics does). We would ideally love to just do the following, but the provider does not have this: // HTTPS reference on a HTTPS site <script src="https://the-cdn.tld/player.js"></script> One option we had was to just download a copy of the JS file and serve it on the HTTPS site, however we have concerns with this as it is not recommended by the provider and will not include updates from them. Assuming we cannot do that, we were thinking a possible other option would be to use a SWF file as a proxy. We were thinking that we could have one of our flash guys create a SWF that loads in the HTTP-served JS file to the page. We were wondering that if this SWF makes the request, would that prevent the browser from showing the security warning or not? I assumed that we would still see the warning since the SWF is still making the request through the browser, but I wanted to see what the hive mind thinks.

  Read the article

• How to accurately parse smtp message status code (DSN)?

  - by Geo

  RFC1893 claims that status codes will come in the format below you can read more here. But our bounce management system is having a hard time parsing error status code from bounce messages. We are able to get the raw message, but depending on the email server the code will come in different places. Is there any rule on how to parse this type of messages to obtain better results. We are not looking for the 100% solution but at least 80%. This document defines a new set of status codes to report mail system conditions. These status codes are intended to be used for media and language independent status reporting. They are not intended for system specific diagnostics. The syntax of the new status codes is defined as: status-code = class "." subject "." detail class = "2"/"4"/"5" subject = 1*3digit detail = 1*3digit White-space characters and comments are NOT allowed within a status- code. Each numeric sub-code within the status-code MUST be expressed without leading zero digits. The quote above from the RFC tells one thing but then the text below from a leading tool on bounce management says something different, where I can get a good source of standard status codes: Return Code Description 0 UNDETERMINED - (ie. Recipient Reply) 10 HARD BOUNCE - (ie. User Unknown) 20 SOFT BOUNCE - General 21 SOFT BOUNCE - Dns Failure 22 SOFT BOUNCE - Mailbox Full 23 SOFT BOUNCE - Message Too Large 30 BOUNCE - NO EMAIL ADDRESS. VERY RARE! 40 GENERAL BOUNCE 50 MAIL BLOCK - General 51 MAIL BLOCK - Known Spammer 52 MAIL BLOCK - Spam Detected 53 MAIL BLOCK - Attachment Detected 54 MAIL BLOCK - Relay Denied 60 AUTO REPLY - (ie. Out Of Office) 70 TRANSIENT BOUNCE 80 SUBSCRIBE Request 90 UNSUBSCRIBE/REMOVE Request 100 CHALLENGE-RESPONSE

  Read the article

• python/django problem with sessions and language

  - by freakish

  Hello everyone! I have the following problem: on the main page I can change language. New language is saved in request.session['django_language']. I also have SESSION_COOKIE_DOMAIN set to my site, so session should be inherited by subdomains. And it is, because after changing language I check request.session['django_language'] in subdomains and it's fine. Then I use django.middleware.locale.LocaleMiddleware to translate my pages. And it works perfectly... only on main site! If I change language and refresh main site - it is ok. However, if I change language and go to a subpage (for example /LogIn), then the page is NOT translated at all. It stays on default language. This is really strange, because if I use {% load i18n %} {% get_current_language as lang %} in this subpage, then lang is good language. There is no mistake. What kind of problem can it be? Some suggestions?

  Read the article

• Status Code from FTPWebRequest GetResponse method

  - by nick

  This is slightly tricky. I am uploading files to FTP asynchronously. After uploading each file I am checking the status of the upload operation for that file. This can be done with StatusCode property of the FtpWebResponse object for that request. The code snippet is as give below. System.IO.FileStream fs = System.IO.File.Open(fileName, System.IO.FileMode.Open); while ((iWork = fs.Read(buf, 0, buf.Length)) > 0) requestStream.Write(buf, 0, iWork); requestStream.Close(); FtpWebResponse wrRet = ((FtpWebResponse)state.Request.GetResponse()); There are about 37 StatusCode values as per msdn. I am unaware as to which of these status code values will assure that the file is uploaded successfully. Some of them I used in my code to check for success are : wrRet.StatusCode == FtpStatusCode.CommandOK wrRet.StatusCode == FtpStatusCode.ClosingData wrRet.StatusCode == FtpStatusCode.ClosingControl wrRet.StatusCode == FtpStatusCode.ConnectionClosed wrRet.StatusCode == FtpStatusCode.FileActionOK wrRet.StatusCode == FtpStatusCode.FileStatus But I am unaware of the rest. I need to be sure about these codes because based on the failure or success of the upload operation I have other dependant operations to be carried out. A wrong condition can affect the remaining code. Another thought that crossed my mind was to simply put the above code into a try..catch and not depend on these status codes. With this I would not be depending on the status codes and assuming that any failure will always be directed to the catch block. Kindly let me know if this is the right way. Thanks in advance.

  Read the article

< Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >