Search Results

Search found 14745 results on 590 pages for 'setting'.

Page 284/590 | < Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >

  • PHP 5.4 Support: Minor Features

    - by Ondrej Brejla
    Hi all! This weak is another PHP weak. Asking why? PHP migrates to Git and GitHub! Isn't that cool? And this week is also NetBeans for PHP week, because we have some new NetBeans 7.2 features for you. Note: All PHP 5.4 features are available in your projects after setting Project Properties -> Sources -> PHP Version to PHP 5.4 value, or after choosing the same value during a PHP Project creation (in New Project Wizard). Callable type hint Let's start with a new PHP 5.4 type hint - callable. It's now in code completion and you can use it in your function declarations! Binary notation for integers The next feature is about recognizing of a new binary notation for integers, so you can use it without any problem - no syntax error will occur. Class::{expr}() And the last feature is about using of Class::{expr}() invocation. It's supported by our parser too, so no syntax errors will occur either. That's all for today and as usual, please test it and if you find something strange, don't hesitate to file a new issue (component php, subcomponent Editor). Thanks.

    Read the article

  • Hidden files in Nautilus after extracting ISO

    - by Luis Alvarado
    I need to first point to the image below to explain a bit about what I find weird here: I extracted the informacion from an ISO I from Nautilus I could only see two folders but from the terminal I can see the rest of the files and folders. This folders do not have the . character in from of them to hide them from plain sight. When I try to "Show hidden files" in Nautilus, Nautilus closes itself. It does not show the hidden folders or files. Somehow they are hidden without using the normal dot in the beginning of the name. The have my user permission but no way of seeing them from Nautilus. I can interact with them but the fact that they appear hidden when I can see them inside the ISO and after extracting them they disappear is what confuses me. What permission or setting makes this folders appear hidden and does not let Nautilus show them and like I said before, trying to show them with the "Show hidden files" option crashes Nautilus and exits it. Forcing me to have to open Nautilus again from the Launcher.

    Read the article

  • What am I doing wrong in my config for MySql?

    - by Knight Hawk3
    When I load my my.conf with the config at the bottom Mysql fails to start and prints no errors. I am running Arch Linux (Updated) with the latest MySQL (5.5) and the latest nginx (Well latest in the repository, Not sure how to check. Only installed it today) I will give you any info you ask for. Thanks for helping! # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /var/run/mysqld/mysqld.sock # Here follows entries for some specific programs # The MySQL server [mysqld] port = 3306 socket = /var/run/mysqld/mysqld.sock skip-locking key_buffer = 16K max_allowed_packet = 1M table_cache = 4 sort_buffer_size = 64K read_buffer_size = 256K read_rnd_buffer_size = 256K net_buffer_length = 2K thread_stack = 64K # Don’t listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (using the “enable-named-pipe” option) will render mysqld useless! # #skip-networking server-id = 1 # Uncomment the following if you want to log updates #log-bin=mysql-bin # Uncomment the following if you are NOT using BDB tables skip-bdb # Uncomment the following if you are using InnoDB tables #innodb_data_home_dir = /var/lib/mysql/ #innodb_data_file_path = ibdata1:10M:autoextend #innodb_log_group_home_dir = /var/lib/mysql/ #innodb_log_arch_dir = /var/lib/mysql/ # You can set .._buffer_pool_size up to 50 – 80 % # of RAM but beware of setting memory usage too high #innodb_buffer_pool_size = 16M #innodb_additional_mem_pool_size = 2M # Set .._log_file_size to 25 % of buffer pool size #innodb_log_file_size = 5M #innodb_log_buffer_size = 8M #innodb_flush_log_at_trx_commit = 1 #innodb_lock_wait_timeout = 50 skip-innodb [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [isamchk] key_buffer = 1M sort_buffer_size = 1M [myisamchk] key_buffer = 1M sort_buffer_size = 1M [mysqlhotcopy] interactive-timeout So what is my silly error?

    Read the article

  • Localhost working fine with executing php code except mail function.

    - by Radheshyam Nayak
    i tried executing the mail() and got the following error "Warning: mail() [function.mail]: Failed to connect to mailserver at "localhost" port 25, verify your "SMTP" and "smtp_port" setting in php.ini or use ini_set() " but SMTP and smtp_port are both set in php.ini more ever other codes are working fine with localhost. disabled or/and added exception to firewell no result.... tried telnet localhost 25 error:could not connect to localhost port 25:connection failed..... Thunderbird my mail client says:could not connect to server localhost the connection was refused.... php.ini [mail function] ; For Win32 only. ; http://php.net/smtp SMTP = localhost smtp_port = 25 running mercury mail server in xampp... previously working fine but now not working..

    Read the article

  • Why is testing MVC Views frowned upon?

    - by Peter Bernier
    I'm currently setting the groundwork for an ASP.Net MVC application and I'm looking into what sort of unit-tests I should be prepared to write. I've seen in multiple places people essentially saying 'don't bother testing your views, there's no logic and it's trivial and will be covered by an integration test'. I don't understand how this has become the accepted wisdom. Integration tests serve an entirely different purpose than unit tests. If I break something, I don't want to know a half-hour later when my integration tests break, I want to know immediately. Sample Scenario : Lets say we're dealing with a standard CRUD app with a Customer entity. The customer has a name and an address. At each level of testing, I want to verify that the Customer retrieval logic gets both the name and the address properly. To unit-test the repository, I write an integration test to hit the database. To unit-test the business rules, I mock out the repository, feed the business rules appropriate data, and verify my expected results are returned. What I'd like to do : To unit-test the UI, I mock out the business rules, setup my expected customer instance, render the view, and verify that the view contains the appropriate values for the instance I specified. What I'm stuck doing : To unit-test the repository, I write an integration test, setup an appropriate login, create the required data in the database, open a browser, navigate to the customer, and verify the resulting page contains the appropriate values for the instance I specified. I realize that there is overlap between the two scenarios discussed above, but the key difference it time and effort required to setup and execute the tests. If I (or another dev) removes the address field from the view, I don't want to wait for the integration test to discover this. I want is discovered and flagged in a unit-test that gets multiple times daily. I get the feeling that I'm just not grasping some key concept. Can someone explain why wanting immediate test feedback on the validity of an MVC view is a bad thing? (or if not bad, then not the expected way to get said feedback)

    Read the article

  • Windows 7, file properties, date modified, how do you show seconds?

    - by Jordan Weinstein
    Anyone know a way to immediately show the seconds of a file's date modified property in the GUI? So if you create a file, any file in any directory, right-click and choose Properties, the date modified (if it's recent) will say something like "dd/mm/yyy hh:mm, one minute ago" - reminder this is in Windows 7. Windows XP did it normally. Then they changed something. If you wait a while, eventually you'll see the seconds, I'm not sure how long a while is, but this is incredibly annoying if you want to troubleshoot something that relies on the seconds of timestamps... is there a setting? registry key I can change perhaps? I'm literally using Chrome, pasting in the path of the directory to be able to see the seconds quickly (as a workaround) but would be nice to be able to use Win7.

    Read the article

  • Fault tolerance with a pair of tightly coupled services

    - by cogitor
    I have two tightly coupled services that can run on completely different nodes (e.g. ServiceA and ServiceB). If I start up another replicated copy of both these services for backup purposes (ServiceA-2 and ServiceB-2), what would be the best way of setting up a fault tolerant distributed system such that on a fault in any of the tightly coupled services ServiceA or ServiceB the whole communication should go through backup ServiceA-2 and ServiceB-2? Overall, all the communication should go either through both services or their backup replicas. |---- Service A | | Service B | | (backup branch - used only on fault in Service A or B) ---- Service A-2 | Service B-2 Note that in case that Service A goes down, data from Service B would be incorrect (and vice versa). Load balancing between the primary and backup branch is also not feasible.

    Read the article

  • Get LDAP Information For University Email. For Thunderbird

    - by Dhruvenkumar Shah
    I am a Student at Northeastern University. They use G-Apps for email ids, so whenever I need to email someone, using university Id which ends with husky.neu.edu. I have to go Gmails compose mail, They have some LDAP Setting by which I get all the email ids using AJAX in "To" as soon as I start typing. I want to configure same in Thunderbird, I contacted university but they are not able to help me. Is it possible that on my G-Apps Gmail Settings those LDAP Parameter needed for configuration are presents? Can anyone help me? I want to configure a directory reference in my email client thunderbird, I dont know the parameters to use, it is possible I can get it somehow?

    Read the article

  • How to pass a filename to a shortcut in Windows

    - by Kendall Frey
    I have a program program.exe and a document document.txt, and to open the document, I can drag document.txt onto program.exe. So far so good. Now I want to call it with a command-line parameter -param so that the full command line is program.exe -param document.txt Unfortunately, I can't do this with drag and drop, so I need to fire up cmd and type in the command manually. This takes too long, and I need an easier way. How can I create a shortcut that I can drop the file onto, and have it call the program with the command-line parameter? I tried setting the shortcut to program.exe -param "%1", but that didn't work, because it appeared to pass only the file name, and not the path, and since the current directory was the one with the program and not the one with the document, it couldn't find the document.

    Read the article

  • Where are task scheduler event files stored on Windows Server 2008?

    - by MacGyver
    I tried setting up triggers in Task Scheduler Windows Server 2008, but Microsoft needs to fix a bug that I documented on Stack Overflow. So I can't use triggers until they fix this bug. Basically the Task Scheduler doesn't trigger an event that has a Result Code of 2147942402. http://stackoverflow.com/questions/10933033/windows-server-2008-task-scheduler-trigger-xml-syntax-for-email-notification-ta In the mean time, I'd like to write a task that runs .NET code that queries the log/event files programmatically every 15 minutes and sends success/failure emails based on the events that occured for the given tasks in task scheduler. Here's where the XPath is stored for the Task Trigger XML tab (that I can't rely on): C:\Windows\System32\Tasks\ I cannot find where the events (or log files containing the event ids) of each task are stored. Does anyone know where to find these log files? The log name is "Microsoft-Windows-TaskScheduler/Operational".

    Read the article

  • Change desktop background at school

    - by Nano8Blazex
    On school computers, I can log in with a user account stored on the school network (something like that, I have no experience in networking and this sort of stuff). Everything is fine and dandy and totally works as it should, but there is one thing that I find annoying. Apparently for some reason I can't change my background to anything more than a couple of different solid colors with our school's logo still stuck in the middle. (the original background is a white logo on black background. If I change it to a different color, the central 6x6 inch black/white logo still remains, only the surrounding color is changed.) It may have been set by school administrators or something, I don't really know. I find this really ugly. Is there any way to change a setting so that I can set the background to any picture I wish? (like on a home pc...) Thanks.

    Read the article

  • PowerShell & SQL Compare

    - by Grant Fritchey
    Just a quick blog post to share a couple of scripts for using PowerShell to call SQL Compare. This is an example from my session at SQL in the City on setting up a sandbox development process. This just runs a compare between a set of scripts and a database and deploys it. set-Location “c:\Program Files (x86)\Red Gate\SQL Compare 10\”; ./sqlcompare /s2:DOJO /db2:MovieManagement_Sandbox /sourcecontrol1 /vu1:grant /vp1:12345 /r1:HEAD /sfx:scripts.xml /sync /mfx:migrations.xml /verbose; I would not recommend using the /verbose output for real automation, but I’m showing off how the tool works. This particular script does a compare straight from source control to a database on my server. You can use variables where I’ve hard coded. That’s it. Works great. Just wanted to share it out there. I have others that I’ll track down and put up here.  

    Read the article

  • What is the difference between /sbin/nologin and /bin/false?

    - by Michael Hampton
    I have often heard it recommended that a user account should be disabled by setting its shell to /bin/false. But, on my existing Linux systems, I see that a great number of existing accounts (all of them service accounts) have a shell of /sbin/nologin instead. I see from the man page that /sbin/nologin prints a message to the user saying the account is disabled, and then exits. Presumably /bin/false would not print anything. I also see that /sbin/nologin is listed in /etc/shells, while /bin/false is not. The man page says that FTP will disable access for users with a shell not listed in /etc/shells and implies that other programs may do the same. Does that mean that somebody could FTP in with an account that has /sbin/nologin as its shell? What is the difference here? Which one of these should I use to disable a user account, and in what circumstances? What other effects does a listing in /etc/shells have?

    Read the article

  • Configuration of Sonicwall Load Balancing

    - by jacke672
    We installed a Sonicwall NSA 240 appliance and have configured it up for our SSL VPN connection and for load balancing with 2 ADSL lines. Over the past week, I have been testing the load balancing options to optimize the connection speeds for our users - but I've run into the following: Round Robin load balancing is the ideal load balancing setting and it's roughly doubling our throughput- but, when it's active users are unable to access any SSL enabled websites such as banking, web-mail, etc. For this reason, I have been using percentage based balancing as it allows me to enable source and destination IP binding, which doesn't 'break' any secure connections but were left with the slow connection speeds we had before adding the second line. I'm looking for a method in which we can take advantage of the round robin connection speeds while allowing users to access sites with SSL certificates, all while still allowing our remote (vpn) users to connect. Any help would be appreciated. Thanks

    Read the article

  • nginx 1.2.3 installed but remains at 1.1.19

    - by Nyxynyxx
    I've installed nginx 1.2.3 by adding a new ppa sudo add-apt-repository ppa:nginx/stable sudo apt-get update sudo apt-get install nginx However, nginx -v still gives me 1.1.19. What happened? Output The following packages will be upgraded: nginx 1 upgraded, 0 newly installed, 0 to remove and 46 not upgraded. Need to get 61.8 kB of archives. After this operation, 3,072 B of additional disk space will be used. Get:1 http://ppa.launchpad.net/nginx/stable/ubuntu/ precise/main nginx all 1.2.3-0ubuntu0ppa3~precise [61.8 kB] Fetched 61.8 kB in 0s (89.7 kB/s) (Reading database ... 79914 files and directories currently installed.) Preparing to replace nginx 1.1.19-1 (using .../nginx_1.2.3-0ubuntu0ppa3~precise_all.deb) ... Unpacking replacement nginx ... Setting up nginx (1.2.3-0ubuntu0ppa3~precise) ... root@precise64:/var/www/apadment# nginx -v nginx version: nginx/1.1.19

    Read the article

  • How to open Total Commander with specific group of tabs open?

    - by Glen S. Dalton
    In TotalCommander I have saved the open tabs on the left and on the right windows in a *.tab file. But I want to put the *.tab file on my desktop and doubleklick it and TC (which is not already running) should open with just those tabs. And I could have different *.tc files on my desktop then. I remember this worked before? If so how can I fix it or change a setting? (I know I can open them again from inside TotalCommander as seen in the picture but that's not what I am asking for here.)

    Read the article

  • Sql Server Prevent Saving Changes That Require Table to be Re-created

    When working with SQL Server Management studio, if you use the Design view of a table and attempt to make a change that will require the table to be dropped and re-added, you may receive an error message like this one: Saving changes is not permitted.  The changes you have made require the following tables to be dropped and re-created.  You have either made changes to a table that cant be re-created or enabled the option Prevent saving changes that require the table to be re-created. In truth, its quite likely that you didnt enable such an option, despite the error dialogs accusations, as it is enabled by default when you install SQL Management Studio.  You can learn more about the issue in the KB article, Error message when you try to save a table in SQL Server 2008: Saving changes is not permitted. Warning: As the above article states, it is not recommended that you turn off this option (at least not permanently), as it will ensure that you do not accidentally change the schema of a table such that data is lost.  Do so at your peril. The simplest way to bypass this error is to go into Option Designers and uncheck the option Prevent saving changes that require table re-creation.  See the screenshot below. The main reason why you will see this error is if you attempted to do any of the following to the table whose design you are saving: Change the Allow Nulls setting for a column Reorder columns Change any columns data type Add a new column The recommended workaround is to script out the changes to a SQL file and execute them by hand, or to simply write out your own T-SQL to make the changes. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • How can I make sftp accounts that can only access their home directory?

    - by LonnieBest
    I'm using Ubuntu Server 9.10. I need to setup 6 accounts for users that will exclusively need sftp. When the user logs in, I need them to only have access to their home directory. I don't want them to be able to navigate to any other places in the file system. I need their ability to type commands to be limited to only the commands needed to view and transfer files back and forth to their home directory. Can anyone offer some guidance on setting thing up this way?

    Read the article

  • Recording custom variables to identify individual users with Google Analytics

    - by mrtsherman
    I have been asked by our marketing department to add Google Analytics custom variable tracking to my company's website. As the website uses server side includes, modifications to the tracking tag roll out globally - maintenance is therefore a headache! So, if I add the following code (keeping in mind SSI so every page has the same code): // visitor level tracking, id = 12345 // Record a unique id for each visitor. When they return also track this id _gaq.push(['_setCustomVar', 1, 'id', '12345', 1]); // page level tracking // If the user signs up for our newsletter we set newsletter to true // Each page they subsequently visit should also mark this as true _gaq.push(['_setCustomVar', 1, 'newsletter', 'true', 1]); I don't use GA and the marketing people don't use custom variables, so we don't actually know how or if this will work. Therefore my questions are:- Do I want Page, Session or Visitor level tracking? What happens when the same code is used on every page? Can GA 'overwrite' a setting. For example, if I set newsletter to true on page X and then user navigates to page Y, will the variable also be marked there?

    Read the article

  • MaaS minimum requirements with juju-jitsu?

    - by Christopher Shen Mu Long
    I've browsed through so many different sites and found so much contradictory information. As I am getting tired of this and do belive this question affects many other users, so I would like to collect the "once and for all times" answer. Unfortunately, the documentation on MaaS and Juju is ... well, not the best, sorry to say that. What are the minimum system requirements for setting up a MaaS cluster, which is going to be orchestrated with juju-jitsu? Do they need to have the exact system specifications or can I just combine different hardware? What are the minimum requirements for the master machine? E.g. "You need at least 8GB of RAM, a dual core CPU with at least 3.0 GHz." How many machines to I need to deploy MaaS on? I've read six machines, nine machines, and so on. I clearly want to know: "You need one for the Master and e.g. five nodes." Do I need to attach as many NICs (network interface cards) to my master machine as there are nodes, or can I simply attach two NICs and a switch? One NIC for connecting to the internet, one for handling the MaaS tasks, connected to a switch, which connects my nodes to the master? Is Juju now ready for local deployment? The last time I experimented with juju and had to reboot my machine, the services orchestrated by juju were gone. This was an issue I also found on the official juju site. Unfortunately, as mentioned above, the documentation is not the best, so I could not find the necessary info on that again. So: Can I use juju on a local environment or will a reboot break my setup?

    Read the article

  • When using TCP load balancing with HAProxy, does all outbound traffic flow through the LB?

    - by user122875
    I am setting up an app to be hosted using VMs(probably amazon, but that is not set in stone) which will require both HTTP load balancing and load balancing a large number(50k or so if possible) of persistant TCP connections. The amount of data is not all that high, but updates are frequent. Right now I am evaluating load balancers and am a bit confused about the architecture of HAProxy. If I use HAProxy to balance the TCP connections, will all the resulting traffic have to flow through the load balancer? If so, would another solution(such as LVS or even nginx_tcp_proxy_module) be a better fit?

    Read the article

  • Netcat I/O enhancements

    - by user13277689
    When Netcat integrated into OpenSolaris it was already clear that there will be couple of enhancements needed. The biggest set of the changes made after Solaris 11 Express was released brings various I/O enhancements to netcat shipped with Solaris 11. Also, since Solaris 11, the netcat package is installed by default in all distribution forms (live CD, text install, ...). Now, let's take a look at the new functionality: /usr/bin/netcat alternative program name (symlink) -b bufsize I/O buffer size -E use exclusive bind for the listening socket -e program program to execute -F no network close upon EOF on stdin -i timeout extension of timeout specification -L timeout linger on close timeout -l -p port addr previously not allowed usage -m byte_count Quit after receiving byte_count bytes -N file pattern for UDP scanning -I bufsize size of input socket buffer -O bufsize size of output socket buffer -R redir_spec port redirection addr/port[/{tcp,udp}] syntax of redir_spec -Z bypass zone boundaries -q timeout timeout after EOF on stdin Obviously, the Swiss army knife of networking tools just got a bit thicker. While by themselves the options are pretty self explanatory, their combination together with other options, context of use or boundary values of option arguments make it possible to construct small but powerful tools. For example: the port redirector allows to convert TCP stream to UDP datagrams. the buffer size specification makes it possible to send one byte TCP segments or to produce IP fragments easily. the socket linger option can be used to produce TCP RST segments by setting the timeout to 0 execute option makes it possible to simulate TCP/UDP servers or clients with shell/python/Perl/whatever script etc. If you find some other helpful ways use please share via comments. Manual page nc(1) contains more details, along with examples on how to use some of these new options.

    Read the article

  • EC2-like virtualisation platform with non-RDP access

    - by code'
    I'm looking into setting up a few small VMs. The trouble is the software I intend to install on them (Cisco VPN Client) blocks out networking (other than to the target VPN destination...) with no workaround. This means that Remote Desktop or other methods of connecting to VMs that go via the Internet (e.g. GoToMyPC, LogMeIn) are a non-starter. What I'm really looking for is an EC2-like platform but which gives direct access to the VM through (for example) Hyper-V Manager. Sadly the only way they all seem to offer to remote control the VMs is direct access via Remote Desktop, whereas I need to be one layer above that (if that makes sense). A viable alternative would be to run virtualisation software within a Windows EC2 instance; obviously hardware virtualisation is impossible but I wonder if there are any software virtualisation platforms that could be run and that would work. Does anyone know if something like this exists/is possible? Thanks! C

    Read the article

  • Encoding movie files into h264

    - by Shiki
    Found some topics about archiving into h264, but those were about the generic questions (does it worth it, which codec to use.) I want to use h264 (with CUDA (if possible)). So far I only found Avidemux a usable encoder with x264 but it makes an unwatchable video file after the encoding (using the best profile, all setting maxed out), really blurry. Please write down detailed what to use, where to get it (if its free, doesnt matter), what to set, etc. Thanks in advance. (OS: Windows 7 ulti x64, VGA is VP2 capable with CUDA GTX260 XFX) Of course, if there is an up to date duplicate, just comment with the link and I'll remove the question ASAP.

    Read the article

  • Dlink DWA-643 ExpressCard / Atheros AR5008 can't connect to wifi networks

    - by Justin Kelly
    I've just purchased a D-Link DWA-643 Xtreme N ExpressCard Notebook Adapter - but it can't connect to my wireless network The card is listed on the FSF website and - refer links below: http://www.fsf.org/resources/hw/index_html/net/wireless/index_html/cards.html http://www.dlink.com.au/products/?pid=550 Ubuntu see the card as using the Atheros AR5008 chipset - refer image below The card lights up and I can see that available wifi networks using this card - so it seems to 'just work' on ubuntu 12.04 but when i try and connect to my networks - it fails I've tried setting the network to all the different options (WEP, WPA2, no encryption, etc.. b/g/n ) but ubuntu sill cant connect to it I've also installed wicd but still couldn't connect Has anyone got a DWA-643 to work in Ubuntu? Or does anyone have any suggestion on how to get it to connect?? Any help would be greatly appreciated Note: the laptop has built in wifi but its broadcom, works but with dialup speed connection - and i've had nothign but trouble using the boardcom drivers so purchased the FSF recommended PCI expresscard as i hoped it would 'just work' on the latest Ubuntu i've have tried to disable the built in wifi - broadcom - but even with the broadcom uninstall and unavailable it didnt help the dlink to connect previously I had MAC address filtering on the router - i've added the dlinks MAC - and also disabled MAC address filtering - still no luck lspci output below: 18:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: D-Link System Inc Device 3a6f Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at e4000000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath9k Kernel modules: ath9k

    Read the article

< Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >