Search Results

Search found 9008 results on 361 pages for 'undocumented feature'.

Page 284/361 | < Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >

  • How to resolve virtual disk degraded in Windows Server 2012

    - by harrydev
    I am using the new Storage Spaces feature in Windows Server 2012. I have the following disks: FriendlyName CanPool OperationalStatus HealthStatus Usage Size ------------ ------- ----------------- ------------ ----- ---- PhysicalDisk2 False OK Healthy Auto-Select 2.73 TB PhysicalDisk3 False OK Healthy Auto-Select 2.73 TB PhysicalDisk4 False OK Healthy Auto-Select 2.73 TB PhysicalDisk5 False OK Healthy Auto-Select 2.73 TB There is also a separate OS disk. The above disks are part of a single storage pool: FriendlyName OperationalStatus HealthStatus IsPrimordial IsReadOnly ------------ ----------------- ------------ ------------ ---------- Pool OK Healthy False False Within this storage pool some virtual disks are defined, see below: FriendlyName ResiliencySettingNa OperationalStatus HealthStatus IsManualAttach Size me ------------ ------------------- ----------------- ------------ -------------- ---- Docs Mirror OK Healthy False 500 GB Data Mirror Degraded Warning False 500 GB Work Mirror Degraded Warning False 2 TB Now the virtual disks are all running normal 2-way mirror, but two of the virtual disks are degraded. This is probably because one of the physical disks was offline for a short period of time. However, now the virtual disk cannot be repaired, even though, all physical disks are healthy. There is plenty of available space in the storage pool. This I cannot understand so I was hoping for some help, on how to resolve this? Below I have listed the full output from the Get-VirtualDisk CmdLet for the "Work" disk: ObjectId : {XXXXXXXX} PassThroughClass : PassThroughIds : PassThroughNamespace : PassThroughServer : UniqueId : XXXXXXXX Access : Read/Write AllocatedSize : 412316860416 DetachedReason : None FootprintOnPool : 824633720832 FriendlyName : Work HealthStatus : Warning Interleave : 262144 IsDeduplicationEnabled : False IsEnclosureAware : False IsManualAttach : False IsSnapshot : False LogicalSectorSize : 512 Name : NameFormat : NumberOfAvailableCopies : 0 NumberOfColumns : 2 NumberOfDataCopies : 2 OperationalStatus : Degraded OtherOperationalStatusDescription : OtherUsageDescription : Disk for data being worked on (not backed up) ParityLayout : PhysicalDiskRedundancy : 1 PhysicalSectorSize : 4096 ProvisioningType : Thin RequestNoSinglePointOfFailure : True ResiliencySettingName : Mirror Size : 2199023255552 UniqueIdFormat : Vendor Specific UniqueIdFormatDescription : Usage : Other PSComputerName :

    Read the article

  • What is the difference between disabling hibernation and idling time for a NAS?

    - by Gary M. Mugford
    I have two D-LINK DNS-323 NAS boxes with two Seagate drives in each. The first one is about a year old, the second one about three months. The first two on Monster are each 1.5T drives while the last two on Origami are 2T drives. I have never been overly happy with the Monster drives but, outside of poor throughput on small files, they have been consistently available to all programs after I put a batch file into my startup to do a directly listing of each. I added the two new drives when I added the Origami box. But, watching the dos box that comes up, I rarely see both listed before the box disappears. Other programs, backups, Belarc, even my file browsers, seem to have a dickens of a time seeing O: and P:. Finally, I decided to go into setup and turn off hibernation. Performance HAS been better since and Belarc, for instance, now sees both drives. At the time of poking around, I noticed an Idle Time feature too. What is the difference between the two settings? And for added points, how much trouble am I in for turning off hibernation? The super bonus round ... anything ELSE I should have done? Thanks in advance, GM

    Read the article

  • How do you do a keyword search the Services.msc (mmc) window in Windows 7?

    - by Warren P
    When you want to run a service, you have very limited capabilities, in all current Windows versions, as far as I can tell. I usually start Services by typing "services.msc" into the Start-Run box, on most versions of Windows, this works. I know how to click the "Name" column in the MMC view of Windows Services. If you know what the first few characters of a service name is, you can usually sort by the name, and type the prefix to scroll the list down (find Windows Search for example). This seems pretty weak to me, so I spent some time searching the interwebs for tools that do a better job of managing services. Usually I have a keyword that I know "fooWare" might be the keyword, and I need to find the (usually badly named) service and start it and stop it. This is often WAY too hard. The best I could do is "NET SERVICES" from the command line, and maybe add a grep in there, but that doesn't list every service, only a few of them. And the MMC snap-in in Win7 now has an Export List button, exporting to csv text file feature which I have used from time to time, to export and then search. I have thought of writing my own tool. I'm hoping a better "service manager" utility exists out there that sysadmins use. I'd like a search box at the top right corner, kind of the same way that the Add-Remove-Programs dialog in Win7 and Vista has a search facility. Does such a services utility exist out there?

    Read the article

  • Tool for search, watch and download youtube videos on Ubuntu

    - by Mike
    I am looking for a tool like MacTubes for Ubuntu. MacTubes is a mac app that can search, watch and download youtube videos. The great advantage of this app is that it searches youtube and shows all videos available there and allows you to select all and download everything fast and easy. MacTubes is so awesome that it also converts the video to MP4 and downloads the HD version of a video when available. I use this on my mac, but my sister uses Linux and I am looking for something like that for her. I have tried Miro, but Miro's search feature is bad as hell. I search for something using MacTubes and it shows me 1600 results. The same search under Miro shows me 40 results. Miro never shows more than one page of results. I prefer it to be an application with a GUI, instead of command line, because my sister's proficiency in Linux is not that good. Any suggestions? Thanks.

    Read the article

  • Solid State Drive Occasionally Freezes For A Minute While OS Is "Beach Balling"

    - by Boris_yo
    Almost a month ago I bought Intel 330 128GB solid state drive, migrated my data with Intel branded limited-feature Acronis from old HDD to new SSD, optimized with Intel Toolbox and started using it. Occassionally I get close to 1 minute freezes while seeing operating system "beach balls" and animations still work, I can interact and click on something but nothing responds, nothing loads. Recently a couple of such freezes occurred in shorter amount of time in a row. I have noticed that if I stop interacting with laptop, the freeze lasts less time than if I was interacting with laptop. But the bigger problem is when freeze just does not end and computer keeps being stuck unlil it is more than half hour and I run out of patience to keep waiting and feeling I need to restart the system because I am not getting anywhere. Such freeze happened while laptop was cold booting into Windows 7. This is when freeze hang occurred and I had to restart, only later to be greeted with Windows recovery screen stating something about faiure of boot sector and asking to insert Windows repair CD. But after I restarted, Windows booted successfully and all was well. I have filmed video of freeze hang occurring in cold boot which you can see here (on video page look below for description): http://www.youtube.com/watch?v=8b7MQlcDTUs As I have mentioned in the beginning, the SSD is less than a month old but here is S.M.A.R.T statistics just in case (TRIM is enabled btw according to CrystalDiskInfo): I want to emphasize that this SSD is the only drive I have, yet it is working in RAID mode (it was enabled initially in BIOS by previous laptop's owner) on Intel Rapid Storage drivers. I am contemplating about switching to AHCI mode but want to be sure this won't cause data loss. Additionally, the stock firmware is the only firmware available currently, yet Intel does not respond to my posts in their community board. If anyone here has this SSD model or generally has experience with SSD drives, I would love to know your thoughts.

    Read the article

  • Pin the Dock to the top

    - by Chris Buchholz
    I wonder if it is possible to pin the Mac OS X Dock to the top in Snow Leopard? I see lets of ideas on how to do this when I google for it, and Secrets (the tweaking app) also provide it as an option, but I don't see any of the ways working for me. I guess it must have worked at some point, since people said it did, but I believe this feature might have been removed from Snow Leopard, and therefore does not work for me. Is this so? Is there really no way to pin the Dock to the top of screen? If not, what ways of "getting rid of the dock" can you guys recommend? I have tried with auto-hiding, but my problem is that this will leave a 4px line at the edge of where the Dock is pinned to, that applications wont cover. Thats not ideal for me. As far as I have understood from googling, this line will not appear if the Dock is pinned to the top, hence my question. What other ways do you guys use to get rid of it?

    Read the article

  • How to set up simple VPN for secure Internet connections over unencrypted Wi-Fi on Windows?

    - by Senseful
    I'm looking for a solution similar to the one in this question, except that I don't have a linux computer. I have windows computers that could be set up to accept VPN connections. Preferably I want to set this up on either Windows Server 2003 or Windows XP. I'd like to connect different devices (e.g. iPhone, iPad, laptops, etc.) that are on open unsecure wireless networks (e.g. the one's you see at places like Starbucks) to this VPN to ensure that all my data is secure. I found an article that shows that you can enable VPN connections on Windows XP. After following those steps, though, I'm not sure what to do. Which ports do I open on my firewall? Which VPN settings do I use on my devices such as the iPhone? Do I use L2TP, PPTP, or IPSec? What's the difference between these? Are there any other steps missing in that tutorial? I'm hoping that since Windows has this built in feature, that it will be much simpler to set up rather than having to deal with setting up something such as OpenVPN. If I follow those settings and enable port forwarding on port 1723, and then use the following settings on the iPhone: PPTP (IP Address) RSA SecurID: Off Encryption Level: Auto Send All Traffic: On Proxy: Off It shows "Connecting..." then "Disconnecting..." and the following error message: VPN Configuration A connection could not be established to the PPP server. Try reconnecting. If the problem continues, verify your settings and contact your Administrator. I'm using a user account that I enabled privileges to in the VPN settings on the Windows machine.

    Read the article

  • Search inside of text files

    - by Matt
    So here is the situation. I currently run a mail server for my small non-profit company. My mail server (Merak Mail Server) keeps logs in .log files and mail as .tmp files. Essentially these are just text files that are kept on the server. Problem is that when I put text into the "Containing text" field on Windows Explorer, it always misses the files and tells me no results returned. Then when I search the files one by one (painful at best), I find the files I need. Do I not understand the search feature well enough, or maybe I have it indexing wrong. I really don't care what I need to use to search the files, even a third-party app is fine with me, I just want to type an email address into a box and search all of my log files or email files and find out which one I am looking for. It can be Windows Search or something else, as long as I can find a way to get the job done I will be happy. Pay solutions are fine as well. Thanks everyone in advance.

    Read the article

  • How do I restore a Windows Server 2008 R2 bare metal backup to a Windows Server 2012 R2 Hyper-V instance?

    - by Michael J. Gray
    I have been trying to find a simple way to migrate a physical Windows Server 2008 R2 installation over to a virtual machine hosted on Windows Server 2012 R2 Datacenter Edition /w Hyper-V. I came across the bare metal backup feature on Windows Server 2008 R2 and assumed I would be able to easily back it up and simply restore it into a new virtual machine by booting the installation media and getting into the Windows recovery process. When I attempted this, Hyper-V got into a network based restore process, but I do not have a PXE server or anything like that and I would rather not set it up. I tried mounting the VHD produced in the bare metal backup, just to see if it would somehow work, but it of course did not and failed with an error related to an incorrect boot device. I checked the virtual machine's BIOS settings and everything looked fine. I did not expect this to work anyway, so I stopped working through this method any further. Is there a way to take my bare metal backup and restore it into a virtual machine without a PXE server or SCVMM? I am opening to using proprietary tools but since the last time I did this I used Norton Ghost, which is no longer supported, I figured I would try doing it with what is readily available.

    Read the article

  • free up not used space on a qcow2-image-file on kvm/qemu

    - by bmaeser
    we are using kvm/qemu with qcow2-images for our virtual machines. qcow2 has this nice feature where the image file only allocates the actually needed space by the virtual-machine. but how do i shrink back the image file, if the virtual machine's allocated space gets smaller? example: 1.) i create a new image with qcow2 format, size 100GB 2.) i use this image to install ubuntu. installation needs about 10 gb, the image-file grows up to about 10GB. nothing unexpected so far. 3.) i fill up the image with about 40 GB of additional data. the image-file grows up to 50GB. i am ok with that :-) 4.) this is where it gets strange: i delete all of the 40GB data on the image, but the image-size still eats up 50GB. question: how do i free up that 40GB of data and shrink the image to the only needed 10 GB? thanks in advance, berni

    Read the article

  • All virtualhosts serving Apache default files

    - by tj111
    I'm trying to configure Apache as an in-network webserver, and am using the sites-available/sites-enabled feature as opposed to just static vhost files. I set up a couple VirtualHosts, all with a unique DocumentRoot, however request for all the VirtualHosts just serve up the "It's Working!" default file. I can't for the life of me figure out why it won't serve the content out of the correct directory. Here's the contents of the virtualhost directive files, let me know if I need to post more. default (note that apache renames this to 000-default in sites-enabled, so it's not an ordering issue) NameVirtualHost *:80 ServerName emp <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName emp DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> billmed <VirtualHost *:80> ServerName billmed.emp ServerRoot /home/empression/Projects/billmed/web/httpdocs <Directory "/home/empression/Projects/billmed/web/httpdocs"> Order Allow,Deny Allow from All </Directory> </VirtualHost> Note that I have DNS zones for both emp and billmed.emp, as well as entries in /etc/hosts. My ultimate goal is to set up this machine as an in-house webserver with a custom tld (emp), but progress has been pretty slow.

    Read the article

  • Free antivirus solutions for Windows

    - by kristof
    What free antivirus solutions would you recommend? What are the limitations? What are the dangers of using free versions as opposed to paid solutions? E.g. are they less reliable? As mentioned by Tony, most of the free solutions are limited to personal use so the question will mainly focus on solutions for personal use. See if your antivirus of choice is already listed. Chances are it is. If you spot an answer that mentions one you already use, vote that up if you think it's a good solution. If you know of a feature or drawback not listed, or can include experiences in dealing with it, please edit the answer accordingly. If you know of any that can also be used at work please point this out. This covers all Windows platforms from XP, Vista and Windows 7. If you see an existing entry that needs an update or to add your testimonial, please do.

    Read the article

  • a VPS mail server

    - by microspino
    Hello I'm trying to substitute citadel on my Virtual Private Server with something more simple. I dislike their documentation and the webmail client. I don't need any groupware feature. I need only an MTA with a nice looking web interface, SPAM and VIRUS check. I recently found the lamson project from Zed Shaw. Is that production ready? Do you had any real and good experience with It? On the latest-news page I see that the last release dates december 2009. Sorry for my lack of knowledge, I'm really new to mail servers but I have to find a solution to manage sending and receiving mail on my VPS. I would accept also to build my VPS email server using a linux system like exim, postfix or whatever but I have really small needs and they will not grow in at least a year and i will be the only one user. I'm searching for something that I could build and manage easily, as I'm a novice linux sysadmin. Having also some good documentation or at least a robust step by step guide would be a plus.

    Read the article

  • Too many concurrent connections Exchange 2010. What else is there to check?

    - by hydroparadise
    I thought that I had this under control before. But for some reason during our last email marketing promo, I start receiving from our mass email client (built in house).. The message could not be sent to the SMTP server. The transport error code is 0x800ccc67. The server repsonse was 421 4.3.2 The maximum number of concurrent connections has exceeded a limit, closing transmission channel again. There's several places I've checked to make sure that wouldn't be an issue. First I checked that receive connector was set to receive an adequate number of connections on our relay connector (1000 connections). Then, I would later find out about Throttling Policies. I created one and set all the properties I knew to set in terms of the policy following properties to 1000; EWSMaxConcurrency, OWAMaxConcurrency, CPAMaxConcurrency, and CPAMaxConcurrency. Still, the email client starts receiving the error shortly after 100 has been sent and takes about 15-30 seconds. The process is then repeatable, but still the error gets received at the same spot everytime. Is there a rate setting that I am missing? Was there a windows update that I missed looking at? Should the software have it's own throttling feature?

    Read the article

  • Custom Extensions on Managed Chromebooks

    - by user417669
    I am a developer looking for the best way to set up different schools with their own custom, private extensions (ie School A should be the only one with access to Extension A). Theoretically, I am aware that there are a few ways to get a custom, private extension pushed out on a domain: Host the .crx on a server and click "Specify a Custom App" in the management console. Create a Domain App by uploading a zip to the Chrome Web Store Upload the extension from my developer account to the Chrome Web Store and publish to a single "trusted tester," or make it unlisted Option (1), hosting the .crx, has not been working. I am not sure why, but the extension is simply not pushing out. I link directly to the crx file, which has the right ID and MIME type, still, no dice. If anyone has any tips or suggestions for getting this to work, I would love to hear them! Option (2), having the school create a domain app, seems a bit inefficient because it requires all schools to upload their own zip. So essentially I would have to email a zip file to the school, and have them publish it. All updates to the extension will also require a similar process, so this doesn't seem ideal. I doubt that option (3) would work. If I published to the admin as a "trusted tester", I don't think that the other people in the domain would be able to access it. If it is unlisted, I do not know how an admin could find it in the Chrome Web Store dialog. Also, I would rather avoid security through obscurity. Has anyone had success with hosting the extension and using the Specify a Custom App feature? Any other suggestions for getting a Custom Extension pushed out by the management console? Thanks so much!

    Read the article

  • Is there a free PDF printer / distiller that creates signable documents?

    - by Coderer
    I've used various methods (mentioned elsewhere on this site) to create PDFs, using a printer driver or converting from PostScript, etc. The common problem is that if I open any of the output files in the newer versions of Adobe Reader, there's an option to "Place Signature" but it's greyed out, or gives an error message that the feature has been disabled for this document. As far as I can tell, there's an option set somewhere in the document metadata that tells Reader "allow the user to sign this document", or don't. None of the free/open source tools that have been been linked to in other SU posts have had this listed as an option (though to be fair I haven't actually downloaded and tried all of them). Is there a tool that does this? Can I just poke a bit with a hex editor somewhere to turn on this functionality? I can sometimes get access to Acrobat Professional to turn on this option, but doing it for every desired case would be more work than I care to do. The current workaround for single-page documents is: Print the document to PDF (possibly via postscript) Open a single-page blank PDF with the "signable" bit turned on in Reader create a custom "stamp" using the Reader markup tools, by importing the printed-to document "stamp" an image of the printed document on the blank page, hoping to get it centered about right place a signature over the document-but-not-really you just stamped This obviously does not scale well at all. It would be much better if I could: Print the document to PDF Drag the document to a simple shortcut / tool / whatever Open the document in Reader Place a signature in the document ETA: Sorry, maybe I should have been clearer -- I'm talking about the certificate-based digital signing available in Adobe Reader, not adding a virtual ink signature. Also, any solution really would have to be available offline.

    Read the article

  • Why does Windows Firewall want to block Google Chrome today?

    - by hippietrail
    I've been using the same public Wi-Fi (staying in a guesthouse) for over a week now. But this morning for the first time I got this puzzling warning from Windows Firewall: Why does Windows Firewall want to block one of the world's most popular web browsers today after being fine with it for years, and being fine with it on this connection for a week? Could it hinge on the words, some features? If so could it be something like a rare or new feature of Chrome that uses a different HTTP port? And if so why doesn't the security alert tell me any more about it? Or could it be a known bug in Windows Firewall? Or perhaps a known virus etc attaching itself to Google Chrome? Or is there a chance it's related to "Other browser makers follow Google's lead, revoke rogue certificates"? I haven't restarted Chrome for days and have downloaded but not installed a Windows update from a few days ago. So I'm not sure what may have managed to change on my machine since yesterday.

    Read the article

  • Ubuntu 12.04/12.10 can't detect windows or any other partitions(Asus z77 UEFI BIOS)

    - by user971155
    I've recently completed tinkering my new pc(motherboard ASUS z77 with UEFI BIOS) and unfortunately not everything works quite well. After installing windows 7 ultimate on a single primary partition(SATA drive) I decided to allocate one more logical partition for additional needs. When I tried doing it with the manager - it said that it couldn't allocate requested size even though I certainly asked for much less than it was available. I thought that it might have been a windows issue and proceded to installing Ubuntu 12.10 x64. When the graphical interface loaded it showed me a message stating that it can't find any other operating system on the drive. When I used custom partioning option it showed me none of my current partions(including that with windows). However, when I boot with "Try Ubuntu" feature it does find them ! I find it weird though. Here's what the console present me with: ubuntu@ubuntu:~$ sudo os-prober /dev/sda1:Windows 7 (loader):Windows:chain ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00072b98 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 100020223 49906688 7 HPFS/NTFS/exFAT /dev/sda3 100022270 1250263039 575120385 5 Extended /dev/sda4 566669312 1250263039 341796864 83 Linux I also tried creating partitions from disk utility which results in error: , Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sda, start=51211402240, size=1923000000, type=0x83 Entering MS-DOS parser (offset=0, size=640135028736) MSDOS_MAGIC found looking at part 0 (offset 1048576, size 104857600, type 0x07) new part entry looking at part 1 (offset 105906176, size 51104448512, type 0x07) new part entry looking at part 2 (offset 51211402240, size 588923274240, type 0x05) Entering MS-DOS extended parser (offset=51211402240, size=588923274240) readfrom = 51211402240 MSDOS_MAGIC found Exiting MS-DOS extended parser looking at part 3 (offset 290134687744, size 349999988736, type 0x83) new part entry Exiting MS-DOS parser MSDOS partition table detected containing partition table scheme = 1 got it Error: Can't have overlapping partitions. ped_disk_new() failed Here's what I get when I try to install the system i.stack.imgur.com/pjlb9.png, i.stack.imgur.com/g1lXN.png P.S. It's strange that I even can't create any more partitions neither with disk-utility nor with windows 7 native tools

    Read the article

  • Can two mocha for After Effects X-Spline Layers be merged ?

    - by George Profenza
    Hello, I'm new to mocha for After Effects, but like the auto tracking feature. There are a few markers I'm adding, but there's one which is giving me a bit of a headache. I'm tracking a circle that moves around a larger object, so it moves in front of it initially, then behind, being occluded by the larger object, then in front again. I tried to track the circle in the first part(when it's in front, before being occluded) and in the second part(when it's in front again, coming out on the other side of the large object) using a single X-Spline. The problem is the second part starts in a different location and I don't know how to 'move' the X-Spline to the new position and track from there, without affecting the previous keyframes. As a workaround I use two X-Spline Layers, export the data to .txt files, then manually merge the two files into a new one containing keyframes from both X-Spline Layers. Is there an easier way to do this (either merging two X-Spline Layer, or using a single X-Spline Layer that can move to a new location without affecting previous keyframes) ? Any suggestion would help.

    Read the article

  • mac gets stuck in a blue screen during boot

    - by user10826
    Hi, a macbook pro 2008 unibody, after restart gets stuck in a blue screen. I used the Leopard disk and I verified and repaired permissions, which seem to be a problem, because the assistant found some wrong files. After restart I got the same problem. After googling I reset PRAM and the other (I do not remember the name now). Same problem. I check that I can boot in safe mode, although it is a lot slower. So before anything I try to make a time machine backup, hoping that I can be done from safe mode. First question: If it works, is it possible to do a clean leopard install (I do not like Snow) and migrate all user accounts from the backup, although it was done in safe mode? Second question: I read about the feature "archive and install" from the leopard disc. Is it reliable? Because I am afraid of losing all data ... Third question: I think this boot stuck has to do with the load of some program or service. It would explain why the computer does boot on safe mode and not in the normal one. I would then like to check what the computer loads during boot, but in more detail that with the information provided from /system preferecens/account/start, because there I removed everything. Where can I find more advanced information? And, if I remove programs from the safe mode, will it be effective druing the normal boot? Thanks

    Read the article

  • Are there any disadvantages of having a "free fall sensor" on a hard disk drive?

    - by therobyouknow
    This is a general question that came out of a specific comparison between the Western Digital Scorpio WD3200BEKT and Western Digital Scorpio WD3200BJKT (which is the same as the former but with a free fall sensor.) Note: I'm not asking for a review or appraisal of these specific drives, as the general question does apply on other brands as well. Though your input would help my decision. To break down the general question in order to answer it, I would be looking for comments on things like: if it's necessary to have differing physical dimensions between free fall sensor drives and those without, e.g. does it make it any thicker, and therefore reduce the systems where it can be installed - particularly smaller laptops? does it actually make the system less reliable - because of false alarms whereby the drive thought the laptop was falling but it wasn't? I suppose that the fact that a manufacturer produces both drives with and without free fall sensors says something about possible disadvantages. Or it could be standard marketing techniques where by making drives with and without results in larger sales volume than just those with the feature alone.

    Read the article

  • 802.11g -> wired ethernet bridging not working

    - by Malachi
    Usually people want to go the other direction, but I want to take our relatively fast and stable house 802.11g signal and bridge it to ethernet. I have tried using an Airport Express (the b/g flavor) and my i7 MacBook pro, both to no avail. Word is that the b/g flavor of This flavor of Airport Express maxes at firmware 6.3 which doesn't support this kind of bridging properly. However, I expected my MacBook pro to do the job with its "Internet Sharing" feature. Alas, although my wired PC does sort of see it, it doesn't work out. Strangely, using DHCP the PC receives the same IP address as my MBP uses on the network. Less strangely, but still surprisingly, the wired ethernet port on my mac registers as the IP address of the gateway when queried with IFCONFIG. It sort of makes sense that the mac would "pretend" to be the gateway, but the whole thing just isn't working and seems configured wrong - but all the docs I see say basically "OS X Internet Sharing: click it and go". What do I do? Do i really have to buy more hardware, even though I have plenty of would-be candidates for bridging? Incidentally, the host router originating the 802.11g signal is a belkin 802.11g router, and is documented to support WDS.

    Read the article

  • Any program to help me check whether an ethernet channel can support full-length VLAN packet?

    - by Jimm Chen
    Sometimes, I have to face such a situation that I need to quickly and explicitly know whether a full length VLAN packet can traverse between two RJ45 ports. Yes, I mean 802.1Q ethernet frame with Etype=81 00 (diagram below). What I can do now is: Get two Windows PCs, for each PC, intall Intel Gigabit NIC and Intel specific driver to create a virtual NIC, with VLAN ID=3 assigned. Then connect the two PCs to each of the two RJ45 port. Finally execute ping to generate a full-length ethernet packet. ping -f -l 1472 <dest-IP> This way, I can be sure that the sent packet has the maximum "IP data payload" of 1500 bytes(8 bytes of ICMP header and 1472 bytes of ICMP data). If the ping gets reply, I know that the ethernet channel support full-length VLAN packet. From my experiment, some home switch or broad band routers(e.g. Linksys WRT54G) does not support full-length VLAN packet switching, so only ping -f -l 1468 succeeds. You see, I have to use an expensive Intel NIC to carry on that test, quite inconvenient. You know, for most laptop today, they do not equip an Intel NIC, and, even it is an Intel NIC, Intel VLAN driver, Intel has limitations on the models on which VLAN driver can be installed. So, my question is: Is there a small program that can let me send a full-length VLAN packet without installing a dedicated VLAN driver? Or better, the program has a stock feature that does the very job for my situation. Windows programs preferred, Linux solution welcome. Simpler the program, the better. Thank you.

    Read the article

  • mshtml.dll latest version for Internet Explorer 8, Windows XP Service Pack 3

    - by AllSolutions
    Many applications in my system (Internet Explorer 8, Yahoo Messenger, Skype 10) are crashing and error details shows module name mshtml.dll. I checked the version of mshtml.dll in system32 folder. It is 8.0.6001.19170. My Internet Explorer version is 8.0.6001.18702. I am not concerned about crash of IE, because I generally use Firefox, but how do I solve the crashes in other applications, which are due to mshtml.dll? I have moved to Windows XP Service Pack 3 (32 bit). I have tried to update Internet Explorer 8 (from Tools-Windows Update), but again it crashes. I can not migrate to IE 9, as it requires Vista or Windows 7. I have applied Cumulative Security update for IE8, which has this file name: IE8-WindowsXP-KB2618444-x86-ENU.exe I could not get much info from Microsoft sites or Google. I do not want to use Automatic Updates feature of Windows. Can somebody give the download links for mshtml.dll and any associated files, which I can replace in system32 folder? Thanks.

    Read the article

  • I deployed Flash Player via a Software Installation policy. How to upgrade?

    - by eleven81
    I have a Windows Server 2008 machine as my DC. Earlier this year I created a Software Installation GPO to deploy Adobe Flash Player plugin MSI. I assigned the policy to the computers, about half run Windows XP x86 and the other half Windows 7 x64. That all works like clockwork. When I created the Software Installation Policy, I disabled the Flash Player plugin's automatic update feature by editing the MSI in Orca. I did this because I wanted all of my machines to run the exact same version of the plugin. Now, some time has passed and a newer version of the Flash Player plugin has been released. It is time for me to push out the updated version of the plugin. I already have the new MSI, but I am lost on what to do next. I see the upgrades tab in the Software Installation GPO, but everything there reads like that would be used for add-ons to a larger master program and not for updates that are released over time. I have read that it is best to create a new Software Installation policy with the new MSI, revoke the old GPO, and assign the new GPO. I feel as though, over time, I will wind up with more revoked policies than active ones. I have also read that some people have had success by replacing the old MSI with the new MSI and simply telling the GPO to redeploy. This seems like a backdoor method that will only get me in to trouble. In short, what is the correct, best-practice, or preferred way to roll out the new version via Group Policy?

    Read the article

< Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >