Search Results

Search found 40420 results on 1617 pages for 'power line networking'.

Page 285/1617 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

• MacMini transmit rate stuck at 11, every other device can connect at full 54Mbit/s?

  - by chum of chance

  I have a MacMini circa 2007 that's getting very low transmit rates via wifi, 8-11. I have other devices that are getting full 54, including a MacBook Air. With everything else off, the MacMini doesn't want to seem to go any faster. Since it has been previously connected to ethernet its entire life, I was wondering if there were some settings I can change to speed up the connection. Option-clicking the network icon gives this read out: PHY Mode: 802.11g Channel: 1 (2.4 Ghz) Security: WPA2 Personal RSSI: -73 Transmit Rate: 11 My new MacBook Air has the following readout: PHY Mode: 802.11n Channel: 1 (2.4 Ghz) Security: WPA2 Personal RSSI: -66 Transmit Rate: 79 Both have full bars and the wireless router is in the same room to eliminate any obstructions from the equation. Could the MacMini be connecting at an older protocol, like 802.11b and be reporting erroneously that it is connected at 802.11g? This would explain why I haven't seen a transmit rate above 11. Any further trouble shooting I can try before buying a new USB 802.11n device? The WiFi router is a DLink DIR-615. I can see other devices, and none, even the other g connected devices, are getting below 30-40 MBit/s. What's going on here?

  Read the article

• Protocol (or service publish/discovery) to detect devices in network

  - by Gobliins

  we connect some embedded devices in a network. What i am looking for now, is a way to find the devices IP and identify them. We work with Windows PC´s and i am about to write a C# tool that should do this. I thought about send a udp broadcast and in the ack i.e. is the device´s ip, which would mean the device needs a daemon runnig to assign an ip itself. Running a service (like a printer) on the device, and on the PC just lookup for the service. I read about some things like apipa, zeroconf, ipv4 local link, bonjour, dns-sd, mdns, bonjour; They can automatically assign ip´s and publish services in a network. My Question is, can someone recommend me what would be good for my task? -The protocol or Service should be low on ressource (memory/cpu usage) use. -Are there some standard protocolls to use? -Is DNS a good idea or would it be to ressource consumpting just for finding a device´s IP? -Should also work when no dhcp servers are around. edit: To clarify a bit: The IP configuration is automatic. The problem to focus is how to tell the PC which IP in the network (or a direct connection in this vase there would only be one) belongs to the device (identity).

  Read the article

• Combine multiple network interfaces to connect to a dedicated server

  - by Dženis Macanovic

  this is an underpaid employee writing, who's apparently responsible for all the IT stuff in a very small (non-IT) company. Today said company got a bunch of PCs/workstations, a switch, a computer that's supposed to be used as a router, two DSL connections (each 16 MBit/s downstream and 1 MBit/s upstream) and a dedicated server which is hosted and managed professionally by a larger local company with some decent connection speed (1 GBit/s both directions if I'm not mistaken). This is what I've set up (note I'm not making use of the second DSL connection at all)... ETH0 ETH1 [ SWITCH ]---[LINUX DEBIAN ROUTER]---[DSL MODEM 1]---[INTERNET] | | | PC1 | | PC2 | ... ... when my boss asked me, if it was somehow possible to get 32 MBit/s downstream and 2 MBit/s upstream. At that time I replied "no" without thinking too much about it. Now I've just had the following idea... ETH1 ETH0 ETH0 ,---[DSL MODEM 1 (NON-STATIC IP)]---, ,---, ETH0 [ SWITCH ]---[LINUX DEBIAN ROUTER] [INTERNET] [LINUX DEBIAN SERVER]---[INTERNET] | | | '---[ DSL MODEM 2 (STATIC IP) ]---' '---' PC1 | | ETH2 ETH0 PC2 | ... ... but I have absolutely no clue how to implement that. Would that even be possible? What would the masquerading rules look like on the router? What about the server? I didn't find anything on the internet, mainly because I couldn't come up with any good keywords to search for to begin with. English obviously isn't my first language. Thanks in advance for your time!

  Read the article

• How can Icheck how much data has been transfered in a particular remote computer in my LAN?

  - by oDx

  I am the system administrator. I am suspecting some unwanted data transfers in some of the computers under my lan. This also effects the overall performance of the network. Is there anyway by which i can check the transfered data over a particular interval. I am not supposed to install any applications on any other computers than mine. I have the router access. I can use tools like ettercap dsniff wireshark etc.

  Read the article

• Network Performance issue

  - by qubemarker

  We have three Ubuntu 10.04 servers. One server is a storage server and the other two servers are configured as clients. The storage server has a good amount of capacity and it is integrated with windows Active directory server for Authentication. I am uploading some video files from both clients to the server and when I am uploading data from any one client alone I get about 26 MB/s data transfer rate. When I upload data from both the clients simultaneously I am only getting about 8 MB/s from each client. I have gigabit ethernet cards in all of the servers and a L2 Managed gigabit switch for connectivity. I don’t know why the data transfer rate is decreasing so much in simultaneous read and write. I have tried all of the TCP stack related settings suggested here. Can any assist with getting better read/write performance out of this setup? Any help is appreciated.

  Read the article

• Driver for wireless card WNC-0301 (Level One) for XP 64 bit

  - by Kamarey

  I looking for drivers for network wireless PCI card WNC-0301 of Level One for Windows XP 64 bit. The one I found on company's site is zipped with password. In short, do somebody know where to find this driver?

  Read the article

• How can I configure a txqueuelen value to persist on reboot?

  - by kdt

  Hi, In CentOS 4.x, I can set the txqueuelen parameter on a network interface with "ifconfig eth0 txqueuelen 1000". However, this is lost when the machine reboots -- which configuration file should I use to set the persistent value of this parameter?

  Read the article

• Can I determine a machine's outward facing IP with PHP without relying on external services?

  - by editor

  I'm working with an API that requires the machine's external IP. As far as I know, the PHP environment I'm using can only get our internal IP. The option on the table is using an external service such as whatismyip.com to tell us: wget -q -O - http://whatismyip.com/automation/n09230945.asp My concern is what happens if that fails. Is there a bulletproof way of determining a machine's IP without relying on external services?

  Read the article

• how to build network across buildings ?

  - by Omie

  Hi ! I need some help in building a network between hundreds of computers spread across multiple buildings of my college. Yes, I'll be doing this as a part of my college project. Please see this image, it will give you enough idea of what I'm trying to achieve. http://i.imgur.com/rOohx.png All the computers in all buildings should be able to connect server. Once network is up, there will be a set of services over intranet and network use will be moderate. well, say there will be an email server and a http server. My point is, I cannot afford much of performance loss. It feels easy to connect computers inside 1 building to each other, however, I'm clueless as to how to connect all of them to server. I mean, just 1 cable won't be enough to connect 1 building to server, right ? How should I go with it ? I am not expecting detailed configuration. Just heads up will do :) Thanks

  Read the article

• Windows 2008 Server network issues

  - by Snowflow

  I have this one server that just doesn't want to be on the internet It's a new server, a twinblade, the other twin works, but not this one. It can connect fine to everythign else in the LAN, but cannot go out on the net It can be reached by ICMP requests over the net (the nagios server can probe it, but not ping it for instance), but not TCP Everything seems fine both in firewall and machine, i get no issues. Anyone care to help me out where i can start looking, i'm seriously confused. edit: it can ping gateway and through the sonicwall site to site VPN, it\s also able to resolve DNS. the only thing it can`t do is reach anything outside of LAN/VPN

  Read the article

• Is this one network or two networks?

  - by colemik

  I have this simple question and really don't know the answer. Does the drawing below show one network or two networks? This is a question about the definition of a network from the OSI / TCP/IP model point of view: From one point of view, those are two L2 networks connected with a bridge. From another point of view, this is one L3 network, that can have a common L3 address space (like 10.1.1.0). PS If this question is too dumb, please move it to Superuser.

  Read the article

• How can I use my Windows 7 computer to share WiFi connection with PCs that don't have wireless?

  - by Tom Auger

  Long story short: modem and wireless router are downstairs and we're having a LAN party where some visitors don't have wireless. There's no way to run the length of cabling required, so looking for options. My Windows 7 Home Premium PC has a wireless-n connection, and I'd like to see if I can use it as a "hub" or switch of sorts, running an ethernet cable out of the back and into a switch, then splitting off to the other PCs. Is this an option? I know with Internet sharing, you can set up your PC as a wireless access point, but I want to do the opposite.

  Read the article

• How to disable wifi usage on Windows 7

  - by Eric

  On a laptop, we currently use LAN(RJ45) connection to access internet. But from time to time, on startup, the laptop "catch" an unsecured wifi hotspot from one of my neighbors, so we would like windows 7 to NOT choose any wifi network : how this can be done ?

  Read the article

• Cannot connect to a shared network drive

  - by dublintech

  I am using windows 7, I cannot connect to a shared network drive on another machine. I can ping the machine. I can remote desktop connect to the machine. The machine is on the same subnet My friend with the exact same laptop as me (and on the same network, same workgroup) can connect to the shared folder. The machine I am trying to connect to and my friends machine can both see shared folders on my machine. I also cannot see shared folders on the friends laptop. When I select diagnose, windows tells me nothing useful. When I select see details on the error pop up, I see: Error code: 0x80004005 (google doesn't help much) I can nbtstat -a the machine who has the shared folder. When I try with my firewall turned off the same happens. I have ensured my windows 7 has all updates. I run security essentials to ensure my laptop is clean. I run ccleaner to clean up my registry. Same error. I have tried with my laptop on both wireless and ethernet. As you can imagine, I am banging my head against the wall on this one.

  Read the article

• Why does my ethernet connection keep re-connecting, only with Windows?

  - by Nick Bolton

  I'm using Windows 7, and I have several computers on my network. For some reason, the network connection keeps disconnecting and immediately re-connecting. Infact, it may just be refreshing the DHCP lease... but I'm not sure. I've tried changing the network card, and ethernet cable, but the issue is still happening. I can only imagine that the issue is with the ethernet switch, but this doesn't happen on my other desktop which uses the same ethernet switch. Any ideas?

  Read the article

• WIndows Hosted Network

  - by Nandakumar V

  I have created a hosted network in my windows7 system. The netsh wlan show hostednetwork command gives the output Hosted network settings ----------------------- Mode : Allowed SSID name : "rambo" Max number of clients : 100 Authentication : WPA2-Personal Cipher : CCMP Hosted network status --------------------- Status : Started BSSID : xx:xx:xx:xx:xx:xx Radio type : 802.11n Channel : 11 Number of clients : 1 xx:xx:xx:xx:xx:xx Authenticated But I have forgot the password for this connection and after some googling I found the command netsh wlan refresh hostednetwork YourNewNetworkPassword. But on executing this command it get the error C:\Users\user>netsh wlan refresh hostednetwork rambo123 Invalid value "rambo123" for command option "data". Usage: refresh hostednetwork [data=]key I have no idea what is wrong with this command.

  Read the article

• /etc/hosts file for a multi-homed, multi-domain machine?

  - by threecheeseopera

  I have a server (debian) with two network interfaces that I would like to host multiple services and domains on; it is not entirely clear to me how the hosts file should be set up. Example: eth0, bound to WAN interface 1.2.3.4: mail.example.com www.example.com eth0:1, bound to WAN interface 1.2.3.5: www.other-domain.com eth1, bound to LAN 192.168.1.123: some-clever-hostname What should my hosts file look like? (including localhost,localhost.localdomain, etc.) Should I use DNS for some of these entries? Which ones? Thanks!

  Read the article

• No wireless adapter in msi u200

  - by Mino Marimat

  I have a MSi u200, and the weird thing was that I was using this normally before, then after a few minutes all of a sudden it couldn't find the wifi signal from my house. I did some troubleshooting and a bit of search in the control panel, and it seems like my hardware is missing. :( I can't even turn on the wireless light using Fn+F8, so my suspicions about the missing hardware strengthened. I tried searching for DIY fixes, but I found out that the wireless card is actually built-in deeper, unlike the RAM cards and the hard drive where you can either replace or add more cards. What do I do?? As of the moment, I can get connected to my wifi here at home using a wireless adapter via usb, and it's working. So my guess about the hardware problem seems correct. HELP!!! Thanks!

  Read the article

• Cisco 861 Router forces one-to-one NAT

  - by Slurpee

  I have a cisco 861 router that only allows one-to-one NATs in order to access the Internet. I would like for computers to get an address via DHCP from this router, and be able to access the Internet without needing to set a static NAT to one of my public IPs. What is wrong with the configuration? I have a basic understanding of the IOS CLI, most of the configuration file (edited for content) was created by my company's long gone Senior Network Engineer.

  Read the article

• Windows 7, network transmit (send) not working

  - by user326287

  My Win 7 works 2 years without problem. But now, I can't transmit (send) big data on LAN/Internet. I can: - Ping anything - Browse Internet, download files at full speed - Send e-mails with very small attachments. - Testing download speed on Speedtest.net, measure stable full speed. I can't: - Testing upload speed on Speedtest.net. Upload stuck.. - Save/send email messages with big (128k) attachment, independent from e-mail provider or e-mail box. THIS IS NOT A HARDWARE/CABLE/CARD OR OTHER NETWORK DEVICES PROBLEM! When I boot from a Linux Live CD, without ANY hardware change, all data sending, testing works correctly, at full speed. I have tried already in Win 7: - Disable Windows/3rd party Firewall completely - Reset IP stack parameters (netsh int ip reset c:\resetlog.txt) - Computer restore - Reinstall LAN driver When I inspect the packets in Wireshark in Windows, I see lot's of (maybe 60% of sent packets) "TCP Retransmission". Sometimes receive "TCP Dup Ack" or "TCP Out-of-Order". Linux don't do this. Thank you for the help.

  Read the article

• Subnetting design for a new building?

  - by Zombie

  A building with 4 floors, each floor is divided as follows; 15 users for accounting, 15 users for finance and 15 users for marketing (i.e 45 user in each floor). Data center is located on the ground floor, with 45 servers to be divided into 15 for all the accounting users in the four floors, another 15 for the finance and the last 15 for the marketing. (i.e each 15 server for each one of the above categories are separated from the other 15 and so on) What is the proper subnetting design for such scenario? Knowing that we are allowed to use anything we want!

  Read the article

• FreeBSD Jail own network stack with vimage

  - by bodokaiser

  I want to throw all services from the host system and put them in jails. Unfortunatly this doesn't work for file sharing (e.g. nfsd) because the jails don't have there own network stack by default. I know read something about vimage which would solve this issue. See more in this thread: http://forums.freebsd.org/showthread.php?t=9006 The use of vimage with raw jails should use moreorless but the use with vimage and ezjail makes it hard. Does anyone have experience about this topic and wants to share it? Regards

  Read the article

• Macbook not connecting to WIFI

  - by Model Reject

  I have been having this problem all week. My Macbook aluminium can't see my wifi network. I have changed the channel to one that isn't being used by neighbours and my iphone picks it up straight away. In other words, the router is fine. It's just the macbook can't see it. This is driving me nuts if anyone can help... My airport card details... Card Type: AirPort Extreme (0x14E4, 0x8D) Firmware Version: Broadcom BCM43xx 1.0 (5.10.131.36.1) Locale: ETSI Supported PHY Modes: 802.11 a/b/g/n Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Wake On Wireless: Supported The funny thing is that is was intermitent on Saturday. I had to keep restarting router and it worked for about 5 minutes, now it doesn't connect or see it at all. Tried using kisMAC and it can't see network either. Thanks, C

  Read the article

• IIS7.5 website (mostly) inaccessible from the outside world

  - by Force Flow

  On the network firewall, I opened up port 80 and forwarded it to the Windows Server 2008 R2 running IIS 7.5. Port 80 is open in the Windows firewall. On the LAN, the website is accessible without any trouble. When accessed from the outside, I can access it only 3 times every few hours before access to it cuts out from the outside. There aren't any access limits in IIS or the network's firewall as far as I can tell. IIS is running PHP 5.3. The default website has been deleted. The bindings for the website's domain are set for mydomain.com *:80 and mydomain.com 192.168.0.3:80

  Read the article

• Potential impact of large broadcast domains

  - by john

  I recently switched jobs. By the time I left my last job our network was three years old and had been planned very well (in my opinion). Our address range was split down into a bunch of VLANs with the largest subnet a /22 range. It was textbook. The company I now work for has built up their network over about 20 years. It's quite large, reaches multiple sites, and has an eclectic mix of devices. This organisation only uses VLANs for very specific things. I only know of one usage of VLANs so far and that is the SAN which also crosses a site boundary. I'm not a network engineer, I'm a support technician. But occasionally I have to do some network traces for debugging problems and I'm astounded by the quantity of broadcast traffic I see. The largest network is a straight Class B network, so it uses a /16 mask. Of course if that were filled with devices the network would likely grind to a halt. I think there are probably 2000+ physical and virtual devices currently using that subnet, but it (mostly) seems to work. This practise seems to go against everything I've been taught. My question is: In your opinion and  From my perspective - What measurement of which metric would tell me that there is too much broadcast traffic bouncing about the network? And what are the tell-tale signs that you are perhaps treading on thin ice? The way I see it, there are more and more devices being added and that can only mean more broadcast traffic, so there must be a threshold. Would things just get slower and slower, or would the effects be more subtle than that?

  Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >