Search Results

Search found 7598 results on 304 pages for 'mouse cursor'.

Page 289/304 | < Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >

• Hard drive write speed - finding a lighter antivirus?

  - by Shingetsu

  I recently have been getting a lot of system lag here (for example, the mouse and the display in general take about 15 seconds to react in the worst cases). After a lot of monitoring the resources, I found that the problem mainly happens when too much Disk I/O is being done. Three culprits have been identified: My browser had the highest write I/O with 35,000,000 I/O Write Bytes. Steam had the highest read I/O (when IDLE!!!) with 106,000,000 I/O Read Bytes. My antivirus (in both cases I will soon mention) was the runner up in both cases with: 30,000,000ish write and 80,000,000ish read. The first AV I had was Avast! which I had liked on my previous system. After noticing it taking so much I/O I switched to Panda (supposing it wouldn't use TOO much during idle phase). However it only used a bit less I/O. Just a lot less memory and cpu and somewhat more network. My browser at the moment is Maxthon 3 (which I like a lot). Before this I was running chrome which had similar data and much higher cpu when running in the background was enabled. I'm not going to be running steam all the time and there aren't many alternatives to it. I like my browser very much, but I AM willing to switch if there's an obvious problem (I'm in programming, however I'm not a very good sysadmin, especially not when it comes to windows). Finally, my system almost stops lagging when I turn off the antivirus (and preferably steam) (some remains but once in every 5-6 hours for a few seconds so it isn't a big problem). My question (has a few parts): Is it possible to configure steam to lower it's I/O usage? (and maybe network while we're at it?) Which antivirus (very preferably free) uses lowest I/O while idle (I leave PC alone during active scans so that isn't a problem). Is there an obvious problem with my current browser and, if so, is there a way to fix it or should I switch and, if so, to what? (P.S. I've been on FFox for some time too). Info on system: Windows 7 (32 bit T_T, I am getting a new one in a few months but I want to keep using system during that time though). Hard Drive (main) is a Raid0. (Also have an external 1TB one which contains steam (and steam alone). As such it doesn't get used by much anything other than steam and isn't a very large problem. However steam still uses some I/O of registry) CPU: Intel(R) Core(TM)2 CPU [email protected] RAM: 6GB (3.25GB usable) (this and CPU have little effect as shown in next section) Additional info: Memory usage during problematic times: 44% CPU usage during problematic times: 35% Page File: main drive: system managed. 1TB drive: none. The current system I'm using is about 6 years old and is mainly a place holder while I await the new one in a few months. Final words: this is my 1st post on Super User (this question wouldn't feel right on Stack Overflow where I usually stay). If it doesn't have it's place here please tell me. If anything is wrong with it, same. Edit Technically I'm looking for a live thread detection program with minimal IO usage. I already have good active scan capability: Kaspersky (the free scanner uses the paid database) and MalwareBytes. Edit 2 Noticed another one, it seems that windows media player has been using stuff even when off! Turning it off and restarting now. If the problem is fixed I'll tell you guys. The reason I didn't notice it before was because I didn't have resource manager in front of me at the MOMENT of the problem. Now I did and it was at the very top of the list!

  Read the article

• EXTJS 3.2.1 EditorGridPanel - ComboBox with jsonstore

  - by Yoong Kim

  Hi, I am using EXTJS with an editorgridpanel and I am trying to to insert a combobox, populated with JsonStore. Here is a snapshot of my code: THE STORE: kmxgz.ordercmpappro.prototype.getCmpapproStore = function(my_url) { var myStore = new Ext.data.Store({ proxy: new Ext.data.HttpProxy({ url: my_url , method: 'POST' }) , reader: new Ext.data.JsonReader({ root: 'rows', totalProperty: 'total', id: 'list_cmpappro_id', fields: [ {name: 'list_cmpappro_id', mapping: 'list_cmpappro_id'} , {name: 'list_cmpappro_name', mapping: 'list_cmpappro_name'} ] }) , autoLoad: true , id: 'cmpapproStore' , listeners: { load: function(store, records, options){ //store is loaded, now you can work with it's records, etc. console.info('store load, arguments:', arguments); console.info('Store count = ', store.getCount()); } } }); return myStore; }; THE COMBO: kmxgz.ordercmpappro.prototype.getCmpapproCombo = function(my_store) { var myCombo = new Ext.form.ComboBox({ typeAhead: true, lazyRender:false, forceSelection: true, allowBlank: true, editable: true, selectOnFocus: true, id: 'cmpapproCombo', triggerAction: 'all', fieldLabel: 'CMP Appro', valueField: 'list_cmpappro_id', displayField: 'list_cmpappro_name', hiddenName: 'cmpappro_id', valueNotFoundText: 'Value not found.', mode: 'local', store: my_store, emptyText: 'Select a CMP Appro', loadingText: 'Veuillez patienter ...', listeners: { // 'change' will be fired when the value has changed and the user exits the ComboBox via tab, click, etc. // The 'newValue' and 'oldValue' params will be from the field specified in the 'valueField' config above. change: function(combo, newValue, oldValue){ console.log("Old Value: " + oldValue); console.log("New Value: " + newValue); }, // 'select' will be fired as soon as an item in the ComboBox is selected with mouse, keyboard. select: function(combo, record, index){ console.log(record.data.name); console.log(index); } } }); return myCombo; }; The combobox is inserted in an editorgridpanel. There's a renderer like this: Ext.util.Format.comboRenderer = function(combo){ return function(value, metadata, record){ alert(combo.store.getCount()); <== always 0!! var record = combo.findRecord(combo.valueField || combo.displayField, value); return record ? record.get(combo.displayField) : combo.valueNotFoundText; } }; When the grid is displayed the first time, instead of have the displayField, I have : "Value not found." And I have the alert : 0 (alert(combo.store.getCount())) from the renderer. But I can see in the console that the data have been correctly loaded! Even if I try to reload the store from the renderer (combo.store.load();), I still have the alert (0)! But when I select the combo to change the value, I can see the data and when I change the value, I can see the displayFiel! I don't understand what's the problem? Since now several days, I already tried all the solutions I found...but still nothing! Any advice is welcome! Yoong

  Read the article

• my asp.net mvc 2.0 application fails with error "No parameterless constructor defined for this objec

  - by loviji

  Hello, i'm new in asp.net mvc 2. I'm trying to list all data from one table(ms sql server table). as ORM I use Entity Framework. now, I'm tried to write something to do this: Model: private uqsEntities _uqsEntity; public permissionRepository(uqsEntities uqsEntity) { _uqsEntity = uqsEntity; } public IEnumerable<userPermissions> getAllData() { return _uqsEntity.userPermissions; } controller: private DataManager _dataManager; public ManagePermissionsController(DataManager datamanager) { _dataManager = datamanager; } public ActionResult Index() { return RedirectToAction("List"); } [AcceptVerbs(HttpVerbs.Get)] public ActionResult List() { return List(null); } [AcceptVerbs(HttpVerbs.Post)] public ActionResult List(int? userID) { return View(_dataManager.Permission.getAllData().ToList()); } Route: routes.MapRoute( "ManagePerm", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "ManagePermissions", action = "Index"}, new string[] { "uqs.Controllers" } // Parameter defaults ); and View automatically generated by Visual Studio(in action mouse right-click). when I run app. , my app. fails. No parameterless constructor defined for this object. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.MissingMethodException: No parameterless constructor defined for this object. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [MissingMethodException: No parameterless constructor defined for this object.] System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck) +0 System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache) +86 System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache) +230 System.Activator.CreateInstance(Type type, Boolean nonPublic) +67 System.Web.Mvc.DefaultControllerFactory.GetControllerInstance(RequestContext requestContext, Type controllerType) +80 [InvalidOperationException: An error occurred when trying to create a controller of type 'uqs.Controllers.ManagePermissionsController'. Make sure that the controller has a parameterless public constructor.] System.Web.Mvc.DefaultControllerFactory.GetControllerInstance(RequestContext requestContext, Type controllerType) +190 System.Web.Mvc.DefaultControllerFactory.CreateController(RequestContext requestContext, String controllerName) +68 System.Web.Mvc.MvcHandler.ProcessRequestInit(HttpContextBase httpContext, IController& controller, IControllerFactory& factory) +118 System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContextBase httpContext, AsyncCallback callback, Object state) +46 System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContext httpContext, AsyncCallback callback, Object state) +63 System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) +13 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8679186 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 please, somebody, help me to catch problem.

  Read the article

• jquery ui draggable elements not 'draggable' outside of scrolling div

  - by Stu

  hello all, i am super stumped. i have many elements (floating href tags) in a div with a set height/width, with scroll set to "overflow: auto" in the css. this is the structure of the divs: <div id="tagFun_div_main"> <div id="tf_div_tagsReturn"> <!-- all the draggable elements go in here, the parent div scolls --> </div> <div id=" tf_div_tagsDrop"> <div id="tf_dropBox"></div> </div></div> the parent div's, 'tf_div_tagsReturn' and 'tf_div_tagsDrop' will ultimately float next to each other. here is the jquery which is run after all of the 'draggable' elements have been created with class name 'tag_cell', : $(function() { $(".tag_cell").draggable({ revert: 'invalid', scroll: false, containment: '#tagFun_div_main' }); $("#tf_dropBox").droppable({ accept: '.tag_cell', hoverClass: 'tf_dropBox_hover', activeClass: 'tf_dropBox_active', drop: function(event, ui) { GLOBAL_ary_tf_tags.push(ui.draggable.html()); tagFun_reload(); } }); }); as i stated above, the draggable elements are draggable within div 'tf_div_tagsReturn', but they do not visually drag outside of that parent div. worthy to note, if i am dragging one of the draggable elements, and move the mouse over the droppable div, with id 'tf_dropBox', then the hoverclass is fired, i just can't see the draggable element any more. thank you very much for any advice on helping me find a solution. this is my first run at using jquery, so hopefully i am just missing something super obvious. i've been reading the documentation and searching forums thus far to no prevail :( thank you for your time. UPDATE: many thanks to Jabes88 for providing the solution which allowed me to achieve the functionality i was looking for, here is what my jquery ended up looking like, feel free to critique it, as i am new to jquery. $(function() { $(".tag_cell").draggable({ revert: 'invalid', scroll: false, containment: '#tagFun_div_main', helper: 'clone', start : function() { this.style.display="none"; }, stop: function() { this.style.display=""; } }); $(".tf_dropBox").droppable({ accept: '.tag_cell', hoverClass: 'tf_dropBox_hover', activeClass: 'tf_dropBox_active', drop: function(event, ui) { GLOBAL_ary_tf_tags.push(ui.draggable.html()); tagFun_reload(); } }); });

  Read the article

• WPF DataContext does not refresh the DataGrid using MVVM model

  - by vikram bhatia

  Project Overview I have a view which binds to a viewmodel containing 2 ObserverableCollection. The viewmodel constructor populates the first ObserverableCollection and the view datacontext is collected to bind to it through a public property called Sites. Later the 2ed ObserverableCollection is populated in the LoadOrders method and the public property LoadFraudResults is updated for binding it with datacontext. I am using WCF to pull the data from the database and its getting pulled very nicely. VIEWMODEL SOURCE class ManageFraudOrderViewModel:ViewModelBase { #region Fields private readonly ICollectionView collectionViewSites; private readonly ICollectionView collectionView; private ObservableCollection<GeneralAdminService.Website> _sites; private ObservableCollection<FraudService.OrderQueue> _LoadFraudResults; #endregion #region Properties public ObservableCollection<GeneralAdminService.Website> Sites { get { return this._sites; } } public ObservableCollection<FraudService.OrderQueue> LoadFraudResults { get { return this._LoadFraudResults;} } #endregion public ManageFraudOrderViewModel() { //Get values from wfc service model GeneralAdminService.GeneralAdminServiceClient generalAdminServiceClient = new GeneralAdminServiceClient(); GeneralAdminService.Website[] websites = generalAdminServiceClient.GetWebsites(); //Get values from wfc service model if (websites.Length > 0) { _sites = new ObservableCollection<Wqn.Administration.UI.GeneralAdminService.Website>(); foreach (GeneralAdminService.Website website in websites) { _sites.Add((Wqn.Administration.UI.GeneralAdminService.Website)website); } this.collectionViewSites= CollectionViewSource.GetDefaultView(this._sites); } generalAdminServiceClient.Close(); } public void LoadOrders(Wqn.Administration.UI.FraudService.Website website) { //Get values from wfc service model FraudServiceClient fraudServiceClient = new FraudServiceClient(); FraudService.OrderQueue[] OrderQueue = fraudServiceClient.GetFraudOrders(website); //Get values from wfc service model if (OrderQueue.Length > 0) { _LoadFraudResults = new ObservableCollection<Wqn.Administration.UI.FraudService.OrderQueue>(); foreach (FraudService.OrderQueue orderQueue in OrderQueue) { _LoadFraudResults.Add(orderQueue); } } this.collectionViewSites= CollectionViewSource.GetDefaultView(this._LoadFraudResults); fraudServiceClient.Close(); } } VIEW SOURCE public partial class OrderQueueControl : UserControl { private ManageFraudOrderViewModel manageFraudOrderViewModel ; private OrderQueue orderQueue; private ButtonAction ButtonAction; private DispatcherTimer dispatcherTimer; public OrderQueueControl() { LoadOrderQueueForm(); } #region LoadOrderQueueForm private void LoadOrderQueueForm() { //for binding the first observablecollection manageFraudOrderViewModel = new ManageFraudOrderViewModel(); this.DataContext = manageFraudOrderViewModel; } #endregion private void cmbWebsite_SelectionChanged(object sender, SelectionChangedEventArgs e) { BindItemsSource(); } #region BindItemsSource private void BindItemsSource() { using (OverrideCursor cursor = new OverrideCursor(Cursors.Wait)) { if (!string.IsNullOrEmpty(Convert.ToString(cmbWebsite.SelectedItem))) { Wqn.Administration.UI.FraudService.Website website = (Wqn.Administration.UI.FraudService.Website)Enum.Parse(typeof(Wqn.Administration.UI.FraudService.Website),cmbWebsite.SelectedItem.ToString()); //for binding the second observablecollection******* manageFraudOrderViewModel.LoadOrders(website); this.DataContext = manageFraudOrderViewModel; //for binding the second observablecollection******* } } } #endregion } XAML ComboBox x:Name="cmbWebsite" ItemsSource="{Binding Sites}" Margin="5" Width="100" Height="25" SelectionChanged="cmbWebsite_SelectionChanged" DataGrid ItemsSource ={Binding Path = LoadFraudResults} PROBLEM AREA: When I call the LoadOrderQueueForm to bind the first observablecollection and later BindItemsSource to bind 2ed observable collection, everything works fine and no problem for the first time binding. But, when I call BindItemsSource again to repopulate the obseravablecollection based on changed selected combo value via cmbWebsite_SelectionChanged, the observalblecollection gets populated with new value and LoadFraudResults property in viewmodule is populated with new values; but when i call the datacontext to rebind the datagrid,the datagrid does not reflect the changed values. In other words the datagrid doesnot get changed when the datacontext is called the 2ed time in BindItemsSource method of the view. manageFraudOrderViewModel.LoadOrders(website); this.DataContext = manageFraudOrderViewModel; manageFraudOrderViewModel values are correct but the datagrid is not relected with changed values. Please help as I am stuck with this thing for past 2 days and the deadline is approaching near. Thanks in advance

  Read the article

• Silverlight animation not smooth

  - by Andrej

  Hi, When trying to animate objects time/frame based in Silverlight (in contrast to using something like DoubleAnimation or Storyboard, which is not suitable e.g. for fast paced games), for example moving a spaceship in a particular direction every frame, the movement is jumpy and not really smooth. The screen even seems to tear. There seems to be no difference between CompositionTarget and DistpatcherTimer. I use the following approach (in pseudocode): Register Handler to Tick-Event of a DispatcherTimer In each Tick: Compute the elapsed time from the last frame in milliseconds Object.X += movementSpeed * ellapsedMilliseconds This should result in a smooth movement, right? But it doesn't. Here is an example (Controls: WASD and Mouse): Silverlight Game. Although the effect I described is not too prevalent in this sample, I can assure you that even moving a single rectangle over a canvas produces a jumpy animation. Does someone have an idea how to minimize this. Are there other approaches to to frame based animation exept using Storyboards/DoubleAnimations which could solve this? Edit: Here a quick and dirty approach, animating a rectangle with minimum code (Controls: A and D) Animation Sample Xaml: <Grid x:Name="LayoutRoot" Background="Black"> <Canvas Width="1000" Height="400" Background="Blue"> <Rectangle x:Name="rect" Width="48" Height="48" Fill="White" Canvas.Top="200" Canvas.Left="0"/> </Canvas> </Grid> C#: private bool isLeft = false; private bool isRight = false; private DispatcherTimer timer = new DispatcherTimer(); private double lastUpdate; public Page() { InitializeComponent(); timer.Interval = TimeSpan.FromMilliseconds(1); timer.Tick += OnTick; lastUpdate = Environment.TickCount; timer.Start(); } private void OnTick(object sender, EventArgs e) { double diff = Environment.TickCount - lastUpdate; double x = Canvas.GetLeft(rect); if (isRight) x += 1 * diff; else if (isLeft) x -= 1 * diff; Canvas.SetLeft(rect, x); lastUpdate = Environment.TickCount; } private void UserControl_KeyDown(object sender, KeyEventArgs e) { if (e.Key == Key.D) isRight = true; if (e.Key == Key.A) isLeft = true; } private void UserControl_KeyUp(object sender, KeyEventArgs e) { if (e.Key == Key.D) isRight = false; if (e.Key == Key.A) isLeft = false; } Thanks! Andrej

  Read the article

• "'0.offsetWidth' is null or not an object" - Coda Slider - Javascript Error Question

  - by bgadoci

  I implemented the Coda Slider tutorial successfully that is located here: http://jqueryfordesigners.com/coda-slider-effect/ The slider works great but I am getting a javascript error that I am not sure how to fix. The error says: '0.offsetWidth' is null or not an object coda-slider.js, line 19 character 3 Not sure how to fix it. Anyone have any ideas? Here is my js and css (don't think I need to upload the HTML but let me know if that helps). JS (coda-slider.js) // when the DOM is ready... $(document).ready(function () { var $panels = $('#slider .scrollContainer > div'); var $container = $('#slider .scrollContainer'); // if false, we'll float all the panels left and fix the width // of the container var horizontal = true; // float the panels left if we're going horizontal if (horizontal) { $panels.css({ 'float' : 'left', 'position' : 'relative' // IE fix to ensure overflow is hidden }); // calculate a new width for the container (so it holds all panels) $container.css('width', $panels[0].offsetWidth * $panels.length); <------line 19 } // collect the scroll object, at the same time apply the hidden overflow // to remove the default scrollbars that will appear var $scroll = $('#slider .scroll').css('overflow', 'hidden'); // apply our left + right buttons $scroll .before('<img class="scrollButtons left" src="/images/layout/navigation/scroll_left.png" />') .after('<img class="scrollButtons right" src="/images/layout/navigation/scroll_right.png" />'); // handle nav selection function selectNav() { $(this) .parents('ul:first') .find('a') .removeClass('selected') .end() .end() .addClass('selected'); } $('#slider .navigation').find('a').click(selectNav); // go find the navigation link that has this target and select the nav function trigger(data) { var el = $('#slider .navigation').find('a[href$="' + data.id + '"]').get(0); selectNav.call(el); } if (window.location.hash) { trigger({ id : window.location.hash.substr(1) }); } else { $('ul.navigation a:first').click(); } // offset is used to move to *exactly* the right place, since I'm using // padding on my example, I need to subtract the amount of padding to // the offset. Try removing this to get a good idea of the effect var offset = parseInt((horizontal ? $container.css('paddingTop') : $container.css('paddingLeft')) || 0) * -1; var scrollOptions = { target: $scroll, // the element that has the overflow // can be a selector which will be relative to the target items: $panels, navigation: '.navigation a', // selectors are NOT relative to document, i.e. make sure they're unique prev: 'img.left', next: 'img.right', // allow the scroll effect to run both directions axis: 'xy', onAfter: trigger, // our final callback offset: offset, // duration of the sliding effect duration: 500, // easing - can be used with the easing plugin: // http://gsgd.co.uk/sandbox/jquery/easing/ easing: 'swing' }; // apply serialScroll to the slider - we chose this plugin because it // supports// the indexed next and previous scroll along with hooking // in to our navigation. $('#slider').serialScroll(scrollOptions); // now apply localScroll to hook any other arbitrary links to trigger // the effect $.localScroll(scrollOptions); // finally, if the URL has a hash, move the slider in to position, // setting the duration to 1 because I don't want it to scroll in the // very first page load. We don't always need this, but it ensures // the positioning is absolutely spot on when the pages loads. scrollOptions.duration = 1; $.localScroll.hash(scrollOptions); }); CSS #slider { margin-left: 35px; position: relative; width: 875px; } .scroll { position: relative; width: 875px; height: 268px; overflow: auto; /* fix for IE to respect overflow */ background: #FFFFFF scroll 0; } .scrollContainer div.panel { position: relative; height: 210px; width: 875px; /* change to 560px if not using JS to remove rh.scroll */ } .scrollButtons { position: absolute; top: 115px; cursor: pointer; } .scrollButtons.left { left: -20px; } .scrollButtons.right { right: -20px; }

  Read the article

• Mac - Flash file not loaded in independent flash player

  - by Mugdha

  Hi, I am working on an independent application to play flash files on Mac. I have already done the same for Linux, and it works flawlessly but on mac for some reason flash is not drawing to my window. It is not throwing any kind of error too. I am using Flash player 10, that would mean that I am using the Core Graphics drawing model. I am able to send mouse events to flash and wrote a sample plugin to check if there was a problem in the context that I was sending, but my sample plugin draws properly to the window. I am getting a call for NPN_InvalidateRect twice and as a response I send an update Event back to flash. I drew a dummy rectangle to check that my context is correct. I have flipped the context to make the origin as top left corner. On doing right click on the debug version of the flash player it shows the following message: "Movie not loaded..." Can anyone give me any idea why is the content not being drawn? I would really appreciate the help, as I have been struggling with it for more than a month now. Here is a small log of the interaction that I have with flash: NPN_UserAgent Called NPN_GetValue Called with variable NPNVWindowNPObject; return NULL NPN_GetValue Called with variable NPNVWindowNPObject; return NULL NPN_GetValue Called with variable NPNVSupportsWindowless; return true NPN_SetValue Called for Variable - NPPVpluginTransparentBool; return true NPN_GetValue Called with variable NPNVsupportsCoreGraphicsBool; return true NPN_SetValue Called for Variable - NPNVpluginDrawingModel NPP_SetWindow (CoreGraphics): 0, window=0xebaa90, context=0xe4c930, window.x:0 window.y:22 window.width:480 window.height:270 NPP_HandleEvent(activateEvent) accepted:0 isActive: 1 NPP_HandleEvent(updateEvt) accepted: 1 NPN_UserAgent Called NPN_GetURLNotify Called with URL - javascript:top.location+"flashplugin_unique" NPN_GetValue Called with variable NPNVWindowNPObject; return NULL NPP_NewStream URL=/Users/mjain/Desktop/clock.swf MIME=application/x-shockwave-flash error=0 NPP_WriteReady responseURL=/Users/mjain/Desktop/clock.swf bytes=268435455 NPN_InvalidateRect Called NPP_Write responseURL=/Users/mjain/Desktop/clock.swf bytes=9925 total-delivered=9925/9925 NPP_WriteReady responseURL=/Users/mjain/Desktop/clock.swf bytes=268435455 NPP_DestroyStream responseURL=/Users/mjain/Desktop/clock.swf error=0 NPP_HandleEvent(updateEvt) accepted: 1 NPN_InvalidateRect Called NPP_HandleEvent(updateEvt) accepted: 1 NPP_NewStream URL=javascript:top.location+"flashplugin_unique" MIME=text/plain error=0 NPP_WriteReady responseURL=javascript:top.location+"flashplugin_unique" bytes=16000 NPN_UserAgent Called NPP_Write responseURL=javascript:top.location+"flashplugin_unique" bytes=52 total-delivered=52/52 NPP_WriteReady responseURL=javascript:top.location+"flashplugin_unique" bytes=16000 NPP_DestroyStream responseURL=javascript:top.location+"flashplugin_unique" error=0 NPP_URLNotify responseURL=javascript:top.location+"flashplugin_unique" reason=0 Thanks Mugdha.

  Read the article

• Custom JComponent not displaying in Custom JPanel

  - by Trizicus

  I've tried the add() method but nothing is displayed when I try to add Test to GraphicsTest. How should I be adding it? Can someone show me? I've included the code I'm using. import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import javax.swing.JComponent; public class Test extends JComponent { Test() { setOpaque(false); setBackground(Color.white); } @Override public void paintComponent(Graphics g) { super.paintComponent(g); Graphics2D g2d = (Graphics2D) g.create(); g2d.setColor(Color.red); g2d.drawString("Hello", 50, 50); g2d.dispose(); } } import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; import java.awt.geom.Rectangle2D; import javax.swing.JPanel; public class GraphicsTest extends JPanel implements MouseListener { private Graphics2D g2d; private String state; private int x, y; GraphicsTest() { add(new Test()); } @Override public void paintComponent(Graphics g) { super.paintComponent(g); g2d = (Graphics2D) g; g2d.setColor(Color.BLACK); g2d.drawString("STATE: " + state, 5, 15); g2d.drawString("Mouse Position: " + x + ", " + y, 5, 30); g2d.setColor(Color.red); Rectangle2D r2d = new Rectangle2D.Double(x, y, 10, 10); g2d.draw(r2d); g2d.dispose(); } public void setState(String state) { this.state = state; } public String getState() { return state; } public void setX(int x) { this.x = x; repaint(); } public void setY(int y) { this.y = y; repaint(); } public void mouseClicked(MouseEvent e) {} public void mousePressed(MouseEvent e) {} public void mouseReleased(MouseEvent e) {} public void mouseEntered(MouseEvent e) {} public void mouseExited(MouseEvent e) {} }

  Read the article

• Using amCharts in Ruby on Rails

  - by Dexter

  I have followed this tutorial in order to use amChart and it worked with no problems , now I am trying to generate a chart with amCharts to show each user and the sign in count but i cant make it work because it not getting the data correctly, what i am missing here ? how can i show user email and sign_in_count ? Users_controller.rb class UsersController < ApplicationController load_and_authorize_resource def index @users = User.all respond_to do |format| format.html # index.html.erb format.json { render :json => @users } end end def show @user = User.find(params[:id]) end def new @user = User.new end def create @user = User.new(params[:user]) if @user.save flash[:notice] = 'A new user created successfully.' redirect_to users_path else flash[:error] = 'An error occurred please try again!' redirect_to users_path end end def edit @user = User.find(params[:id]) end def update @user = User.find(params[:id]) if @user.update_attributes(params[:user]) flash[:notice] = 'Profile updated' redirect_to users_path else render 'edit' end end def destroy @user = User.find(params[:id]) if current_user == (@user) flash[:error] = "Admin suicide warning: Can't delete yourself." else @user.destroy flash[:notice] = 'User deleted' redirect_to users_path end end def checkname if User.where('user_name = ?', params[:user]).count == 0 render :nothing => true, :status => 200 else render :nothing => true, :status => 409 end return end end Users_helper.rb module UsersHelper def convert_to_amcharts_json(data_array) data_array.to_json.gsub(/\"text\"/, "text").html_safe end end index.html.erb <div id="chartdiv" style="width: 100%; height: 400px;"></div> <script type="text/javascript"> var chart; var chartData = <%= convert_to_amcharts_json(@users) %>; AmCharts.ready(function () { // SERIAL CHART chart = new AmCharts.AmSerialChart(); chart.dataProvider = chartData; chart.categoryField = "email"; // the following two lines makes chart 3D chart.depth3D = 20; chart.angle = 30; // AXES // category var categoryAxis = chart.categoryAxis; categoryAxis.labelRotation = 90; categoryAxis.dashLength = 5; categoryAxis.gridPosition = "start"; // value var valueAxis = new AmCharts.ValueAxis(); valueAxis.title = "Most Active users"; valueAxis.dashLength = 5; chart.addValueAxis(valueAxis); // GRAPH var graph = new AmCharts.AmGraph(); graph.valueField = "sign_in_count"; graph.colorField = "color"; graph.balloonText = "<span style='font-size:14px'>[[category]]: <b>[[value]]</b></span>"; graph.type = "column"; graph.lineAlpha = 0; graph.fillAlphas = 1; chart.addGraph(graph); // CURSOR var chartCursor = new AmCharts.ChartCursor(); chartCursor.cursorAlpha = 0; chartCursor.zoomable = false; chartCursor.categoryBalloonEnabled = false; chart.addChartCursor(chartCursor); // WRITE chart.write("chartdiv"); }); </script>

  Read the article

• Right-click context menu for Java JTree?

  - by arcanex

  I'm trying to implement pop-up menus in Java JTree. I've sub-classed DefaultTreeCellRenderer (to change node appearance) and DefaultTreeCellEditor (to create Components to attach event listeners to, since apparently the Components that DefaultTreeCellRenderer.getTreeCellRendererComponent() returns can't do it?). I don't really want to "edit" the nodes, just be able to pop-up a menu when a node gets right-clicked, but this is the only way I can think of doing it right now... Below is the code that I have so far-- I'm just trying to figure out how to capture MouseEvents. It sort of works, but badly. What's a better way to accomplish what I'm trying to do here? private class My_TreeCellRenderer extends DefaultTreeCellRenderer { My_TreeCellRenderer() { super (); } public Component getTreeCellRendererComponent(JTree tree, Object value, boolean selected, boolean expanded, boolean leaf, int row, boolean hasFocus) { super.getTreeCellRendererComponent(tree, value, selected, expanded, leaf, row, hasFocus); // set label text and tool tips setText(((My_Object)value).getTreeLabel()); setToolTipText(((My_Object)value).getTreeToolTip()); return this; } } private class My_TreeCellEditor extends DefaultTreeCellEditor { private MouseAdapter ma; My_TreeCellEditor(JTree tree, DefaultTreeCellRenderer renderer) { super (tree, renderer); ma = new MouseAdapter() { public void mousePressed(MouseEvent e) { if (e.isPopupTrigger()) { System.out.println("My Popup"); } } public void mouseReleased(MouseEvent e) { if (e.isPopupTrigger()) { System.out.println("My Popup"); } } }; } public Component getTreeCellEditorComponent(JTree tree, Object value, boolean selected, boolean expanded, boolean leaf, int row) { String src_filename = null; // return non-editing component Component c = renderer.getTreeCellRendererComponent(tree, value, selected, expanded, leaf, row, true); // add mouse listener if it's not listening already MouseListener mouseListeners[] = c.getMouseListeners(); int i; for (i=0; i < mouseListeners.length && mouseListeners[i] != ma; i++); if (i >= mouseListeners.length) c.addMouseListener(ma); return c; } protected boolean canEditImmediately(EventObject event) { if (event instanceof MouseEvent && ((MouseEvent)event).getClickCount() == 1) return true; else return false; } }

  Read the article

• Android: Custom ListAdapter extending BaseAdapter crashes on application launch.

  - by Danny

  Data being pulled from a local DB, then mapped using a cursor. Custom Adapter displays data similar to a ListView. As items are added/deleted from the DB, the adapter is supposed to refresh. The solution attempted below crashes the application at launch. Any suggestions? Thanks in advance, -D @Override public View getView(int position, View convertView, ViewGroup parent) { View v = convertView; ViewGroup p = parent; if (v == null) { LayoutInflater vi = (LayoutInflater)context.getSystemService(Context.LAYOUT_INFLATER_SERVICE); v = vi.inflate(R.layout.items_row, p); } int size = mAdapter.getCount(); Log.d(TAG, "position " + position + " Size " + size); if(size != 0){ if(position < size) return mAdapter.getView(position, v, p); Log.d(TAG, "-position " + position + " Size " + size); } return null; } Errors: 03-23 00:14:10.392: ERROR/AndroidRuntime(718): java.lang.UnsupportedOperationException: addView(View, LayoutParams) is not supported in AdapterView 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.AdapterView.addView(AdapterView.java:461) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.view.LayoutInflater.inflate(LayoutInflater.java:415) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.view.LayoutInflater.inflate(LayoutInflater.java:320) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.view.LayoutInflater.inflate(LayoutInflater.java:276) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at com.xyz.abc.CustomSeparatedListAdapter.getView(CustomSeparatedListAdapter.java:90) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.AbsListView.obtainView(AbsListView.java:1273) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.ListView.makeAndAddView(ListView.java:1658) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.ListView.fillDown(ListView.java:637) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.ListView.fillFromTop(ListView.java:694) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.ListView.layoutChildren(ListView.java:1516) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.AbsListView.onLayout(AbsListView.java:1112) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.view.View.layout(View.java:6569) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.FrameLayout.onLayout(FrameLayout.java:333) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.view.View.layout(View.java:6569) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.FrameLayout.onLayout(FrameLayout.java:333) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.view.View.layout(View.java:6569) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.FrameLayout.onLayout(FrameLayout.java:333) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.view.View.layout(View.java:6569) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.LinearLayout.setChildFrame(LinearLayout.java:1119) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.LinearLayout.layoutVertical(LinearLayout.java:998) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.LinearLayout.onLayout(LinearLayout.java:918) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.view.View.layout(View.java:6569) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.FrameLayout.onLayout(FrameLayout.java:333) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.view.View.layout(View.java:6569) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.FrameLayout.onLayout(FrameLayout.java:333) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.view.View.layout(View.java:6569) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.widget.FrameLayout.onLayout(FrameLayout.java:333) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.view.View.layout(View.java:6569) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.view.ViewRoot.performTraversals(ViewRoot.java:979) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.view.ViewRoot.handleMessage(ViewRoot.java:1613) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.os.Handler.dispatchMessage(Handler.java:99) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.os.Looper.loop(Looper.java:123) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at android.app.ActivityThread.main(ActivityThread.java:4203) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at java.lang.reflect.Method.invokeNative(Native Method) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at java.lang.reflect.Method.invoke(Method.java:521) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:791) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:549) 03-23 00:14:10.392: ERROR/AndroidRuntime(718): at dalvik.system.NativeStart.main(Native Method)

  Read the article

• For a .NET winforms datagridview I would like a combobox column to have a different set of values for each row.

  - by Seth Spearman

  Hello, I have a DataGridView that I am binding to a POCO. I have the databinding working fine. However, I have added a combobox column that I want to be different for each row. Specifically, I have a grid of purchased items, some of which have sizes (like Adult XL, Adult L) and other items are not sized (like Car Magnet.) So essentially what I want to change is the DATA SOURCE for a combobox column in the data grid. Can that be done? What event can I hook into that would allow me to change properties of certain columns FOR EACH ROW? An acceptable alternative is to change a property when the user clicks or tabs into the row. What event is that? Seth EDIT I need more help with this question. With Triduses help I am SO close but I need a bit more information. First, per the question, is the CellFormatting event really the best/only event for changing the DataSource for a combo box column. I ask because I am doing something rather resource/data intensive, not merely formatting the cell. Second, the cellformatting event is being called just by having the mouse hover over the cell. I tried to set the FormattingApplied property inside my if-block and then I check for it in the if- test but that is returning a weird error message. My ideal situation is that I would apply change the data source for the combo box once for each row and then be done with it. Finally, in order to set the data source of the combobox colunm I have to be able to cast the Cell inside my if block to a type of DataGridViewComboBoxColumn so that I can fill it with rows or set the datasource or something. Here is the code I have right now. Private Sub ProductsDataGrid_CellFormatting(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellFormattingEventArgs) Handles ProductsDataGrid.CellFormatting If e.ColumnIndex = ProductsDataGrid.Columns("SizeDGColumn").Index Then ' AndAlso Not e.FormattingApplied Then Dim product As LeagueOrderProductInfo = DirectCast(ProductsDataGrid.Rows(e.RowIndex).DataBoundItem, LeagueOrderProductInfo) Dim sizes As LeagueOrderProductSizeList = product.ProductSizes sizes.RemoveSizeFromList(_parentOrderDetail.SizeID) 'WHAT DO I DO HERE TO FILL THE COMBOBOX COLUMN WITH THE sizes collection. End If End Sub Please help. I am completely stuck and this task item should have taken an hour and I am 4+ hours in now. BTW, I am also open to resolving this by taking a completely different direction with it (as long as I can be done quickly.) Seth

  Read the article

• Can't interact with children of an itemRenderer in Flex 4 Gumbo

  - by BlueDude

  I thought this would be pretty easy but I'm running into all sorts of problems with this. I have an ItemRenderer with a an image and two labels. I want to assign separate mouse events to the image and two labels. It seems like the item renderer is treated like a single interactive piece and I haven't found a way to override that. I couldn't even disable the default rollover effect so I had to style the rollOverColor to match my background. Can anyone provide a solution? <s:DataGroup id="browserDataGroup" dataProvider="{model.userBoardList}" verticalCenter="0" left="10" rollOverColor="0x424242" itemRenderer="edu.xxxxx.components.board.BrowserItemRenderer"> <!--itemrenderer code below --> <s:ItemRenderer xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/halo" xmlns:ns="library://ns.adobe.com/flex/mx" buttonMode="true" useHandCursor="true" mouseChildren="true"> <s:states> <s:State name="up"/> <s:State name="over"/> </s:states> <s:layout> <s:VerticalLayout gap="2"/> </s:layout> <s:Group> <ns:Image id="image" source="{data.thumbnail}" addedEffect="Fade" completeEffect="Fade" removedEffect="Fade" width="130" height="89" horizontalCenter="0" verticalCenter="0"/> <s:Rect id="imageRect" width="130" height="89"> <s:stroke> <s:SolidColorStroke color="0xFFFFFF" joints="miter" pixelHinting="true"/> </s:stroke> </s:Rect> </s:Group> <s:Label text="{data.title}" color="0xFFFFFF" fontWeight="bold"/> <s:Group> <s:layout> <s:HorizontalLayout gap="3"/> </s:layout> <s:Label text="Edit" color="0xFFFFFF" click="trace('edit');" textDecoration.up="underline" textDecoration.over="none"/> <s:Label text="|" color="0xFFFFFF"/> <s:Label text="Delete" color="0xFFFFFF" click="trace('delete');" textDecoration.up="underline" textDecoration.over="none"/> </s:Group> </s:ItemRenderer>

  Read the article

• Other solution instead of Cursoring

  - by dewacorp.alliances

  Hi there I have the following pivoting table that I manage to do and here's the result and I want to put a bit further. **NTRITCode; NTRIId; Parameter; Usage; Rate** CURRENT; 4; Peak; 100; 0.1 CURRENT; 4; NonPeak; 200; 0.2 PROPOSED; 6; Peak; 100; 0.2 PROPOSED; 6; NonPeak; 200; 0.3 PROPOSED; 8; Peak; 200; 0.3 PROPOSED; 8; NonPeak; 200; 0.5 As you can see there is 2 sets of proposed (ID=6 and 8). I want somehow display like this below so each set has a pair of CURRENT as well as the PROPOSED one as follow: **Sequence; NTRITCode; NTRIId; Parameter; Usage; Rate** 1; CURRENT; 4; Peak; 100; 0.1 1; CURRENT; 4; NonPeak; 200; 0.2 1; PROPOSED; 6; Peak; 100; 0.2 1; PROPOSED; 6; NonPeak; 200; 0.3 2; CURRENT; 4; Peak; 100; 0.1 2; CURRENT; 4; NonPeak; 200; 0.2 2; PROPOSED; 8; Peak; 200; 0.3 2; PROPOSED; 8; NonPeak; 200; 0.5 Again all I can think off is using combination of CURSOR and UNION but is there any TSQL that can do this? Thanks

  Read the article

• Java Copy/Paste org.w3c.dom.Node between two running copies of the same program

  - by Jay

  I have a program that shows a tree representation of an XML file. Using a number of sources online I have Copy/Paste within a single instance of the program working. I am using the system Clipboard. What I need though is to be able to copy a node from one instance of the program and paste to a different instance of the same program. I have tried a number of different options, all resulting in the same behavior. When pasting from within the same application the clipboardContent contains a "transferable" object with the correct data along with an isLocal set to "true". When I perform the copy and then attempt the paste from another instance of the same program running the clipboardContent contains a "flavorsToData" HashMap and "flavors" values, the check for isDataFlavorSupported fails (never hits my custom class that represents the new flavor). I have tried using different values for the requestor object in the getContents() call. Likewise I have tried a few different ClipboardOwners for the setContent() call. Neither seem to change the behavior in any way. I am sorely tempted to convert the node that is being copied back into a textual XML format, and then on the paste convert back to the DOM model, but would rather not if possible. This class is used to define the DataFlavor and transferable object: import java.awt.datatransfer.*; import org.w3c.dom.Node; public class NodeCopyPaste implements Transferable { static public DataFlavor NodeFlavor; private DataFlavor [] supportedFlavors = {NodeFlavor}; public Node aNode; public NodeCopyPaste (Node paraNode) { aNode = paraNode; try { NodeFlavor = new DataFlavor (Class.forName ("org.w3c.dom.Node"), "Node"); } catch (ClassNotFoundException e) { e.printStackTrace (); } } public synchronized DataFlavor [] getTransferDataFlavors () { return (supportedFlavors); } public boolean isDataFlavorSupported (DataFlavor nodeFlavor) { return (nodeFlavor.equals (NodeFlavor)); } public synchronized Object getTransferData (DataFlavor nFlavor) throws UnsupportedFlavorException { if (nFlavor.equals (NodeFlavor)) return (this); else throw new UnsupportedFlavorException (nFlavor); } public void lostOwnership (Clipboard parClipboard, Transferable parTransferable) { } } I define a Clipboard object from the main application screen and then tie in copy and paste handlers for the mouse clicks: During initialization I assign the system clipboard: clippy = Toolkit.getDefaultToolkit().getSystemClipboard(); Copy Handler Node copyNode = ((CLIInfo) node.getUserObject()).DOMNode.cloneNode(true); NodeCopyPaste contents = new NodeCopyPaste(copyNode); clippy.setContents (contents, null); Paste Handler Transferable clipboardContent = clippy.getContents (null); Node clonedNode = null; if ((clipboardContent != null) && (clipboardContent.isDataFlavorSupported (NodeCopyPaste.NodeFlavor))) { try { NodeCopyPaste tempNCP = (NodeCopyPaste) clipboardContent.getTransferData (NodeCopyPaste.NodeFlavor); clonedNode = tempNCP.aNode.cloneNode(true); } catch (Exception e) { e.printStackTrace (); } Thanks!

  Read the article

• Project References DLL version hell

  - by Mr Shoubs

  We're having problems getting visual studio to pick up the latest version of a DLL from one of our projects. We have multiple class library projects (e.g. BusinessLogic, ReportData) and a number of web services, each has a reference to a Connectivity DLL we've written (this ref to the connectivity DLL is the problem). We always point references to the DLL in the bin/debug folder, (which is where we always build to for any given project) and all custom DLL references have CopyLocal = True and SpecificVersion = False ReportData has a reference to business logic (which also has a reference to connectivity - I don't see why this should cause a problem, but thought it is worth mentioning) The weird thing is, when you click "Add Reference" and browse to Connectivity/bin/debug - you hover the mouse over the DLL file, the correct (latest) version is shown (version and file version are always incremented together), but when you click ok, a previous version number is pulled though. Even when I look in the current projects debug folder (where copy local would put the DLL after compiling) that shows the latest version number. - NO WHERE does can I find the previous version of the DLL outside of visual studio, but in that project references it has the old version - even though the path is correct. I'm at a loss as to where it might be getting the old versions from. Or even why it wants that one. This is possibly the most frustraighting problem I have ever come across. Does anyone know how to ensure the latest version is pulled through (preferably automatically or on compile). EDIT: Although not exactly the scenario I'm dealing with I was reading this article and somewhere it mentions about CLR ignoring revision numbers. Understandable (even though this hasn't been a problem before - we're on revision 39), so I thought I would update the build number, still didn't work. In a vain attempt I though I would update the minor version number and see if that made any difference. I'm not saying this is the answer as I have to check quite a few things first, but on the face of it, this seems to have solved my problem... Further edit: In other class libraries this seems to have solved the problem, however in a test windows application it still pulls a previous version through :( If I increment the minor version number again, the same problem come back and I am left with the wrong version being pulled though. Further Edit - I created an entirly new project, added a reference and still had the exact same problem. This suggests the problem is restriced to the project I am referencing. Wish I knew why! Anyone had this problem before and know how to get around it? HELP!

  Read the article

• How to honor/inherit user's language settings in WinForm app

  - by msorens

  I have worked with globalization settings in the past but not within the .NET environment, which is the topic of this question. What I am seeing is most certainly due to knowledge I have yet to learn so I would appreciate illumination on the following. Setup: My default language setting is English (en-us specifically). I added a second language (Danish) on my development system (WinXP) and then opened the language bar so I could select either at will. I selected Danish on the language bar then opened Notepad and found the language reverted to English on the language bar. I understand that the language setting is per application, so it seemed that Notepad set the default back to English. (I found that strange since Windows and thus Notepad is used all over the world.) Closing Notepad returned the setting on the language bar to Danish. I then launched my open custom WinForm application--which I know does not set the language--and it also reverted from English to Danish when opened, then back to Danish when terminated! Question #1A: How do I get my WinForm application upon launch to inherit the current setting of the language bar? My experiment seems to indicate that each application starts with the system default and requires the user to manually change it once the app is running--this would seem to be a major inconvenience for anyone that wants to work with more than one language! Question #1B: If one must, in fact, set the language manually in a multi-language scenario, how do I change my default system language (e.g. to Danish) so I can test my app's launch in another language? I added a display of the current language in my application for this next experiment. Specifically I set a MouseEnter handler on a label that set its tooltip to CultureInfo.CurrentCulture.Name so each time I mouse over I thought I should see the current language setting. Since setting the language before I launch my app did not work, I launched it then set the language to Danish. I found that some things (like typing in a TextBox) did honor this Danish setting. But mousing over the instrumented label still showed en-us! Question #2A: Why does CultureInfo.CurrentCulture.Name not reflect the change from my language bar while other parts of my app seem to recognize the change? (Trying CultureInfo.CurrentUICulture.Name produced the same result.) Question #2B: Is there an event that fires upon changes on the language bar so I could recognize within my app when the language setting changes?

  Read the article

• Rich Tooltip for SelectItem, error when including EL in "for" attribute

  - by pakore

  How to attach a rich:tooltip to the list generated by f:selectItems when using a variable for the attribute for inside the rich:tooltip. This code works fine (the value of #{prefix} is theprefixvalue <ui:composition> <a4j:form id="#{prefix}_form"> <h:selectOneRadio style="text-align:left" id="#{prefix}_rating"> <f:selectItems value="#{test.options}"></f:selectItems> </h:selectOneRadio>&nbsp; <rich:toolTip for="theprefixvalue_form\:theprefixvalue_rating\:0">a</rich:toolTip> </a4j:form> </ui:composition> But this code does not: <ui:composition> <h:outputText value="#{prefix}" /> <a4j:form id="#{prefix}_form"> <h:selectOneRadio style="text-align:left" id="#{prefix}_rating"> <f:selectItems value="#{test.options}"></f:selectItems> </h:selectOneRadio>&nbsp; <rich:toolTip for="#{prefix}_form\:#{prefix}_rating\:0">a</rich:toolTip> </a4j:form> </ui:composition> Throws the following exception: Caused by: java.lang.IllegalArgumentException: theprefixvalue_rating at javax.faces.component.UIComponentBase.findComponent(UIComponentBase.java:612) at org.ajax4jsf.renderkit.RendererUtils.findComponentFor(RendererUtils.java:1037) at org.richfaces.renderkit.html.ToolTipRenderer.getTargetId(ToolTipRenderer.java:234) at org.richfaces.renderkit.html.ToolTipRenderer.constructJSVariable(ToolTipRenderer.java:251) ... TestBean is session scoped and this is the code for getOptions(); public List<SelectItem> getOptions(){ List<SelectItem> options = new ArrayList<SelectItem>(); options.add(new SelectItem("a","a")); options.add(new SelectItem("b","b")); options.add(new SelectItem("c","c")); return options; } Any ideas? The goal is to have a tooltip when the mouse is over the different options. Thanks in advance.

  Read the article

• Xcode/iPhone Development 6 months in - Annoyances

  - by clearbrian

  Hi I've been iPhone programming for 6 months and come from a PC/Java/Eclipse background and still have a few annoyances with Xcode/iPhone programming I wonder are there any shortcuts to. Is there any way to prevent multiple windows opening all the time in XCode? a) When you click on the Errors/Warnings in the bottom right of the status bar build errors are shown in separate window. Any way to get these to show in the main editor? b) Anyway to get debugger to appear in main editor. I have a big screen iMac and it's still window hell on Macs. When you come from Alt-Tab the Mac is a nightmare. 2) Anyway to get a toolbar item on the main editor to: a) Open Console (I know CMD-thingy-R) b) Open Break points (you have to open Debugger first then breakpoints) I know there's keyboard shortcuts but I have only left hand free others on the trackball so any keys on right hand side of keyboard are too far. I know you can add Finder toolbar scripts (just wondering if anyway to extend Xcode). Are there utilities to extend Xcode? Scripts/Automator/Any Services I can setup to help. Can you automate Xcode like you can with Windows/ActiveX/VBA 3) Limit lookups using CMD + double click. If I double click on a variable to find its definition using CMD + double click it shows every occurrence of all variables with that name. (annoying it you name all you maps mapView) Anyway to get it to limit to the current class or at least order so current class is first. 4) Find doesn't seem to loop backwards if result all above cursor position I'm in a class and I hit CMD + F for find. Find box appears. I enter some text hit return. It says I have x matches but only back arrow is highlight in Find But when I hit < it does nothing. I need to scroll to the top and redo the search. If the text is both forwards and backwards then both < are highlighted and it works. is this a bug or a 'feature' Missing Eclipse features I have been looking at the User Script menu but was wondering how powerful they are? 5) any scripts around to generate source from members such as description: @property @synthesize if I add a new member, run a script will generate @property/@syntesize and release in dealloc 7) any good sites for scripts? SCM Im having problems with SCM and Folders on HD under project Classes directory. You get a library e.g. JSON. It usually comes as a folder. You copy it to the /Classes for your project. /Classes/JSON I create a Group for the Library in Xcode under Classes group. Classes JSON I drag the files from the folder into xcode into the JSON Group. I add them to the SCM and icon changes from ? to A but if I try and commit them it say folder /JSON is not under SCM. Can you drag a folder into Xcode so that it AND its files get included in SCM? Anyway to stop Xcode Help from being on top all the time. I keep feeling like punching it and telling it to get out of the way! :) I dont mind it open just not in the way once I've finished. Yes I know I can Ctrl-W Sites: the main site I use to learn Obj-C are : stackoverflow.com Google code Search - tonnes of full apps on here http://www.iphonedevsdk.com/forum/iphone-sdk-development/ Apple Developers Forums (anyway to get RSS feed to these or is that blasphemy :) ) Safari - 100s of IT book though prob too many to keep up :) any others? Any site that gives simple examples for Obj-C/ UIKit The docs just show the methods but actual examples (Google code search has helped a lot here)

  Read the article

• Superfish: How to keep sub menu open after it has been clicked

  - by Roland

  I'm having the following scenario. I have a menu and if one hovers over the menu a sub menu appears and if mouse moves out the sub menu disappears, now I want the following if I click on the on a item in the sub menu, I want the sub-menu to remain open, when the new page has been loaded. I'm using superfish Jquery plugin for this. Is this possible and if how. my code in html <div id="nav"> <div id="nav2"> <ul class="sf-menu sf-navbar "> <li> <a title="HOME" class="sf-with-ul " href="/index.php?r=site/index&amp;sid=1">HOME</a> </li> </ul> <ul class="sf-menu sf-navbar"> <li> <a href="?sid=2" id="gallery" class="sf-with-ul selected_main">GALLERY</a> <ul class="subs" id="sub1"><li class="arrow"><img src="images/arrow.gif" /></li><li><a title="Kitchens" href="/index.php?r=images/sddsd&amp;id=1">Kitchens</a></li><li><a title="Vanities" href="/index.php?r=images/sddsd&amp;id=2">Vanities</a></li></ul> </li> </ul> <ul class="sf-menu sf-navbar "> <li> <a href="?sid=3" class="sf-with-ul " >ACCESSORIES</a> <ul class="subs" id=""><li class="arrow"><img src="images/arrow.gif" /></li><li><a title="Door Handles" href="/index.php?r=images/sddsd&amp;id=2">Door Handles</a></li><li><a title="Spanners" href="/index.php?r=images/sddsd&amp;id=1">Spanners</a></li></ul> </li> </ul> <ul class="sf-menu sf-navbar "> <li> <a title="CONTACT US" class="sf-with-ul " href="/index.php?r=site/contact&amp;sid=4">CONTACT US</a> </li> </ul> </div> </div> and then the superfish code $(function(){ $("ul.sf-menu").superfish({ delay: 0, speed: 'fast', autoArrows: false, dropShadows: false }); }); I've also noticed that the following css code is used to display the item left: 0; top: 2.5em; z-index: 99;

  Read the article

• Panning Image Using Javascript in ASP.Net Page Overflows Div

  - by Bob Mc

  I have an ASP.Net page that contains a <div> with an <img> tag within. The image is large so the <div> is set with a size of 500x500 pixels with overflow set to scroll. I'm attempting to add image panning using a click and drag on the image. However, every time I begin dragging the image escapes the boundary of the element and consumes the entire page. Here is example code that illustrates the problem: <%@ Page Language="VB" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="_Default" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <div id="divInnerDiv" style="overflow:scroll; width:500px; height:500px; cursor:move;"> <img id="imgTheImage" src="Page0001.jpg" border="0" /> </div> <script type="text/javascript"> document.onmousemove = mouseMove; document.onmouseup = mouseUp; var dragObject = null; var mouseOffset = null; function mouseCoords(ev){ if(ev.pageX || ev.pageY){ return {x:ev.pageX, y:ev.pageY}; } return { x:ev.clientX + document.body.scrollLeft - document.body.clientLeft, y:ev.clientY + document.body.scrollTop - document.body.clientTop }; } function getMouseOffset(target, ev){ ev = ev || window.event; var docPos = getPosition(target); var mousePos = mouseCoords(ev); return {x:mousePos.x - docPos.x, y:mousePos.y - docPos.y}; } function getPosition(e){ var left = 0; var top = 0; while (e.offsetParent){ left += e.offsetLeft; top += e.offsetTop; e = e.offsetParent; } left += e.offsetLeft; top += e.offsetTop; return {x:left, y:top}; } function mouseMove(ev) { ev = ev || window.event; var mousePos = mouseCoords(ev); if(dragObject){ dragObject.style.position = 'absolute'; dragObject.style.top = mousePos.y - mouseOffset.y; dragObject.style.left = mousePos.x - mouseOffset.x; return false; } } function mouseUp(){ dragObject = null; } function makeDraggable(item){ if(!item) return; item.onmousedown = function(ev){ dragObject = this; mouseOffset = getMouseOffset(this, ev); return false; } } makeDraggable(document.getElementById("imgTheImage")); </script> </div> </form> </body> </html> Also note that this HTML works fine in a non-ASP.Net page. Is there something in the ASP.Net Javascript that is causing this issue? Does anyone have a suggestion for panning a JPEG within a <div> block that will work in ASP.Net? I have tried using the jQueryUI library but the result is the same.

  Read the article

• draw ellipse in MFC C++ just use OPENGL?

  - by taki

  i trying to draw ellipse in MFC C++ just use OPENGL. it ran for the resulting ellipse but it is not correct mouse coordinates. My code: in class Ellispe.cpp void VeEllispe::putPixel(int x,int y,int xc, int yc) { glBegin(GL_POINTS);// bat dau bang ve diem glVertex2i(xc+x,yc+y); glVertex2i(xc-x,yc-y); glVertex2i(xc+x,yc-y); glVertex2i(xc-x,yc+y); glEnd(); } void VeEllispe::Draw(int a, int b,int xc,int yc) { int x = 0; int y = b; float a2 = (a*a); float b2 = (b*b); float p = b2 - a2*b + 0.25*a2; while(2*b2*x <= 2*y*a2) { putPixel(x,y,xc,yc); if (p < 0) p+= 2*b2*x + 3*b2; else { p+= 2*b2*x + 3*b2 - 2*a2*y + 2*a2; y--; } x++; } x = a; y = 0; p = a2 - b2*a + 0.25*b2; while(2*a2*y <= 2*x*b2) { putPixel(x,y,xc, yc); if (p < 0) p+= 2*a2*y + 3*a2; else { p+= 2*a2*y + 3*a2 - 2*b2*x + 2*b2; x--; } y++; } } in class XYZView.cpp . . VeEllispe e; void Cbaitap1View::OnDraw(CDC* /*pDC*/) { Cbaitap1Doc* pDoc = GetDocument(); ASSERT_VALID(pDoc); if (!pDoc) return; wglMakeCurrent(m_hDC,m_hRC); glClear(GL_COLOR_BUFFER_BIT); glClearColor(1.0,1.0,1.0,0.0); glColor3f(0.0,0.0,1.0); glPointSize(2); if (state==4) e.Draw(X2,Y2,X1,Y1); glFlush(); SwapBuffers(::GetDC(GetSafeHwnd())); wglMakeCurrent(NULL,NULL); } And if possible, can you teach me the document to drawing triangles or parapol use OPENGL?

  Read the article

• Dotted Border turns to solid if object is animated with jQuery.

  - by Serg Chernata

  I have a simple setup: an image and then a paragraph with a bit of info that is hidden and then slides up over the image on mouse hover. If I try to apply a border-top that is dashed or dotted onto the paragraph it simply turns into a solid line. Is this a known issue with a fix? I even tried adding the dotted border through jQuery and it still comes out as a solid line. <div class="wrap"> <img src="images/fillertxt.jpg" alt="image" /> <img src="images/filler.jpg" class="front" alt="image" /> <p class="info"> This is a short description with a bit of text. </p> </div> .wrap .info { width:204px; height:50px; background:url(images/infobg.jpg) repeat-x #8d9c0c; color:#f7f5ef; padding:3px; position:absolute; top:142px; left:0; border-top:3px dotted #8d9c0c; } $(document).ready(function(){ $("p.info").css("border-top","3px dotted #8d9c0c"); $(function(){ bindTypeOne(); $("input[type=radio]").click(function(){ if ($(this).attr("rel") == "type1"){ bindTypeOne(); } else if ($(this).attr("rel") == "type2"){ bindTypeTwo(); } }); }); function bindTypeOne() { $("div.wrap").hover(function(){ $(this).children("p.info").stop(); $(this).children(".front").stop().animate({"top":"141px"}, 400); },function(){ $(this).children("p.info").stop(); $(this).children(".front").stop().animate({"top":"0"}, 700); }); }; function bindTypeTwo() { $("div.wrap").hover(function(){ $(this).children(".front").stop(); $(this).children("p.info").stop().animate({"top":"80px","border-top":"3px dotted #8d9c0c"}, 400); },function(){ $(this).children(".front").stop(); $(this).children("p.info").stop().animate({"top":"142px"}, 700); }); }; });

  Read the article

• Calling "Base-Getter" in Overriding Getter of Property

  - by scherand

  I have a base class "Parent" like this: using System; using System.Collections.Generic; using System.Text; namespace ConsoleApplication1 { class Parent { private int parentVirtualInt = -1; public virtual int VirtualProperty { get { return parentVirtualInt; } set { if(parentVirtualInt != value) { parentVirtualInt = value; } } } } } and a child class like this: using System; using System.Collections.Generic; using System.Text; namespace ConsoleApplication1 { class Child : Parent { public override int VirtualProperty { get { if(base.VirtualProperty > 0) { throw new ApplicationException("Dummy Ex"); } return base.VirtualProperty; } set { if(base.VirtualProperty != value) { base.VirtualProperty = value; } } } } } Note that the getter in Child is calling the getter of Parent (or at least this is what I intend). I now use the "Child" class by instantiating it, assigning a value (let's say 4) to its VirtualProperty and then reading the property again. Child c = new Child(); c.VirtualProperty = 4; Console.Out.WriteLine("Child.VirtualProperty: " + c.VirtualProperty); When I run this, I obviously get an ApplicationException saying "Dummy Ex". But if I set a breakpoint on the line if(base.VirtualProperty > 0) in Child and check the value of base.VirtualProperty (by hovering the mouse over it) before the exception can be thrown (I assume(d)), I already get the Exception. From this I convey that the statement base.VirtualProperty in the "Child-Getter calls itself"; kind of. What I would like to achieve is the same behavior I get when I change the definition of parentVirutalInt (in Parent) to protected and use base.parentVirtualInt in the Getter of Child instead of base.VirtualProperty. And I don't yet see why this is not working. Can anybody shed some light on this? I feel that overridden properties behave differently than overridden methods? By the way: I am doing something very similar with subclassing a class I do not have any control over (this is the main reason why my "workaround" is not an option). Kind regards

  Read the article

< Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >