Search Results

Search found 9202 results on 369 pages for 'package structuring'.

Page 289/369 | < Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >

  • SSL timeout on some sites, across all browsers, on Mac OS X Snow Leopard

    - by dansays
    For the past several weeks, I've been receiving "Error 7 (net::ERR_TIMED_OUT): The operation timed out" when I attempt to connect to either Twitter or Paypal via SSL. I get this specific error in Google Chrome, but the same problem occurs in both Safari and Firefox. Other sites work fine, and other computers on my network can access these two sites. I have no firewall settings that would prevent me from accessing these sites over port 443. I notice that both Twitter and Paypal both have "Verisign Class 3 Extended Validation SSL CA" certificates. It is unclear whether this is related to the problem. In an effort to troubleshoot, I attempted to open the test sites referenced on Verisign's root certificate support page, which worked fine. Just to be sure, I downloaded and installed the root package file and installed all included Verisign certificates. No joy. I feel like I've hit a dead end. Any ideas? Update the first: I also cannot connect to FedEx.com, who also has a Verisign Class 3 Extended Validation cert. Update the second: Aaaaaaand it fixed itself. I did nothing. Or, I did something that worked, but in a delayed fashion. Frustrating, but a win is a win. I'll take it.

    Read the article

  • How to install ia32-libs on Wheezy?

    - by javano
    I have seen a couple of questions on ServerFault relating to installing ia32-libs on a 64bit machine but the solutions aren't working for me (I don't think any of these questions where for Wheezy specifically I'm not sure how to proceed); root@server:/home/# apt-get install -f ia32-libs Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-i386 php5 : Depends: libapache2-mod-php5 (>= 5.4.4-14+deb7u2) but it is not going to be installed or libapache2-mod-php5filter (>= 5.4.4-14+deb7u2) but it is not going to be installed or php5-cgi (>= 5.4.4-14+deb7u2) but it is not going to be installed or php5-fpm (>= 5.4.4-14+deb7u2) but it is not going to be installed php5-mysql : Depends: phpapi-20100525 E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. root@server:/home/# sudo apt-get install ia32-libs-i386 Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: ia32-libs-i386:i386 : Depends: freeglut3:i386 (>= 2.6.0-1) but it is not going to be installed Depends: lesstif2:i386 (>= 1:0.95.2-1) but it is not going to be installed Depends: libacl1:i386 (>= 2.2.49-4) but it is not going to be installed Depends: libasyncns0:i386 (>= 0.3-1.1) but it is not going to be installed Depends: libattr1:i386 (>= 1:2.4.44-2) but it is not going to be installed Depends: libaudio2:i386 (>= 1.9.2-4) but it is not going to be installed Depends: libaudiofile1:i386 (>= 0.2.6-8) but it is not going to be installed Depends: libavahi-client3:i386 (>= 0.6.27-2+squeeze1) but it is not going to be installed Depends: libavahi-common3:i386 (>= 0.6.27-2+squeeze1) but it is not going to be installed Depends: libbsd0:i386 (>= 0.2.0-1) but it is not going to be installed Depends: libcap2:i386 (>= 1:2.19-3) but it is not going to be installed Depends: libcomerr2:i386 (>= 1.41.12-4stable1) but it is not going to be installed Depends: libcups2:i386 (>= 1.4.4-7+squeeze1) but it is not going to be installed Depends: libcurl3:i386 (>= 7.21.0-2) but it is not going to be installed Depends: libdbus-1-3:i386 (>= 1.2.24-4+squeeze1) but it is not going to be installed Depends: libdirectfb-1.2-9:i386 (>= 1.2.10.0-4) but it is not going to be installed Depends: libdrm-intel1:i386 (>= 2.4.21-1~squeeze3) but it is not going to be installed Depends: libdrm-radeon1:i386 (>= 2.4.21-1~squeeze3) but it is not going to be installed Depends: libdrm2:i386 (>= 2.4.21-1~squeeze3) but it is not going to be installed Depends: libedit2:i386 (>= 2.11-20080614-2) but it is not going to be installed Depends: libesd0:i386 (>= 0.2.41-8) but it is not going to be installed Depends: libexif12:i386 (>= 0.6.19-1) but it is not going to be installed Depends: libexpat1:i386 (>= 2.0.1-7) but it is not going to be installed Depends: libflac8:i386 (>= 1.2.1-2+b1) but it is not going to be installed Depends: libfltk1.1:i386 (>= 1.1.10-2+b1) but it is not going to be installed Depends: libfontconfig1:i386 (>= 2.8.0-2.1) but it is not going to be installed Depends: libfreetype6:i386 (>= 2.4.2-2.1+squeeze3) but it is not going to be installed Depends: libgcrypt11:i386 (>= 1.4.5-2) but it is not going to be installed Depends: libgdbm3:i386 (>= 1.8.3-9) but it is not going to be installed Depends: libgl1-mesa-dri:i386 (>= 7.7.1-5) but it is not going to be installed Depends: libgl1-mesa-glx:i386 (>= 7.7.1-5) but it is not going to be installed Depends: libglu1-mesa:i386 (>= 7.7.1-5) but it is not going to be installed Depends: libgnutls26:i386 (>= 2.8.6-1) but it is not going to be installed Depends: libgpg-error0:i386 (>= 1.6-1) but it is not going to be installed Depends: libgphoto2-2:i386 (>= 2.4.6-3) but it is not going to be installed Depends: libgphoto2-port0:i386 (>= 2.4.6-3) but it is not going to be installed Depends: libgssapi-krb5-2:i386 (>= 1.8.3+dfsg-4squeeze2) but it is not going to be installed Depends: libice6:i386 (>= 2:1.0.6-2) but it is not going to be installed Depends: libidn11:i386 (>= 1.15-2) but it is not going to be installed Depends: libieee1284-3:i386 (>= 0.2.11-6) but it is not going to be installed Depends: libjack-jackd2-0:i386 (>= 1.9.5~dfsg-14) but it is not going to be installed or libjack0:i386 (>= 1:0.118+svn3796-7) but it is not going to be installed Depends: libjpeg62:i386 (>= 6b1-1) but it is not going to be installed Depends: libjpeg8:i386 (>= 8b-1) but it is not going to be installed Depends: libk5crypto3:i386 (>= 1.8.3+dfsg-4squeeze2) but it is not going to be installed Depends: libkeyutils1:i386 (>= 1.4-1) but it is not going to be installed Depends: libkrb5-3:i386 (>= 1.8.3+dfsg-4squeeze2) but it is not going to be installed Depends: libkrb5support0:i386 (>= 1.8.3+dfsg-4squeeze2) but it is not going to be installed Depends: liblcms1:i386 (>= 1.18.dfsg-1.2+b3) but it is not going to be installed Depends: libltdl7:i386 (>= 2.2.6b-2) but it is not going to be installed Depends: liblzo2-2:i386 (>= 2.03-2) but it is not going to be installed Depends: libmpg123-0:i386 (>= 1.12.1-3) but it is not going to be installed Depends: libnspr4-0d:i386 (>= 4.8.6-1) but it is not going to be installed Depends: libnss3-1d:i386 (>= 3.12.8-1+squeeze4) but it is not going to be installed Depends: libogg0:i386 (>= 1.2.0~dfsg-1) but it is not going to be installed Depends: libopenal1:i386 (>= 1:1.12.854-2) but it is not going to be installed Depends: libpam0g:i386 (>= 1.1.1-6.1+squeeze1) but it is not going to be installed Depends: libpng12-0:i386 (>= 1.2.44-1+squeeze1) but it is not going to be installed Depends: libpopt0:i386 (>= 1.16-1) but it is not going to be installed Depends: libpulse0:i386 (>= 0.9.21-3+squeeze1) but it is not going to be installed Depends: libsamplerate0:i386 (>= 0.1.7-3) but it is not going to be installed Depends: libsane:i386 (>= 1.0.21-9) but it is not going to be installed Depends: libsasl2-2:i386 (>= 2.1.23.dfsg1-7) but it is not going to be installed Depends: libsdl1.2debian:i386 (>= 1.2.15) but it is not going to be installed Depends: libselinux1:i386 (>= 2.0.96-1) but it is not going to be installed Depends: libsigc++-2.0-0c2a:i386 (>= 2.2.4.2-1) but it is not going to be installed Depends: libsm6:i386 (>= 2:1.1.1-1) but it is not going to be installed Depends: libsndfile1:i386 (>= 1.0.21-3+squeeze1) but it is not going to be installed Depends: libsqlite3-0:i386 (>= 3.7.3-1) but it is not going to be installed Depends: libssh2-1:i386 (>= 1.2.6-1) but it is not going to be installed Depends: libssl1.0.0:i386 (>= 1) but it is not going to be installed Depends: libstdc++5:i386 (>= 1:3.3.6-20) but it is not going to be installed Depends: libsvga1:i386 (>= 1:1.4.3-29) but it is not going to be installed Depends: libsysfs2:i386 (>= 2.1.0+repack-1) but it is not going to be installed Depends: libtasn1-3:i386 (>= 2.7-1) but it is not going to be installed Depends: libtdb1:i386 (>= 1.2.1-2+b1) but it is not going to be installed Depends: libtiff4:i386 (>= 3.9.4-5+squeeze3) but it is not going to be installed Depends: libts-0.0-0:i386 (>= 1.0-7) but it is not going to be installed Depends: libusb-0.1-4:i386 (>= 2:0.1.12-16) but it is not going to be installed Depends: libuuid1:i386 (>= 2.17.2-9) but it is not going to be installed Depends: libvorbis0a:i386 (>= 1.3.1-1) but it is not going to be installed Depends: libvorbisenc2:i386 (>= 1.3.1-1) but it is not going to be installed Depends: libvorbisfile3:i386 (>= 1.3.1-1) but it is not going to be installed Depends: libwrap0:i386 (>= 7.6.q-19) but it is not going to be installed Depends: libx11-6:i386 (>= 2:1.3.3-4) but it is not going to be installed Depends: libx86-1:i386 (>= 1.1+ds1-6) but it is not going to be installed Depends: libxau6:i386 (>= 1:1.0.6-1) but it is not going to be installed Depends: libxaw7:i386 (>= 2:1.0.7-1) but it is not going to be installed Depends: libxcb-render-util0:i386 (>= 0.3.6-1) but it is not going to be installed Depends: libxcb-render0:i386 (>= 1.6-1) but it is not going to be installed Depends: libxcb1:i386 (>= 1.6-1) but it is not going to be installed Depends: libxcomposite1:i386 (>= 1:0.4.2-1) but it is not going to be installed Depends: libxcursor1:i386 (>= 1:1.1.10-2) but it is not going to be installed Depends: libxdamage1:i386 (>= 1:1.1.3-1) but it is not going to be installed Depends: libxdmcp6:i386 (>= 1:1.0.3-2) but it is not going to be installed Depends: libxext6:i386 (>= 2:1.1.2-1) but it is not going to be installed Depends: libxfixes3:i386 (>= 1:4.0.5-1) but it is not going to be installed Depends: libxft2:i386 (>= 2.1.14-2) but it is not going to be installed Depends: libxi6:i386 (>= 2:1.3-6) but it is not going to be installed Depends: libxinerama1:i386 (>= 2:1.1-3) but it is not going to be installed Depends: libxml2:i386 (>= 2.7.8.dfsg-2+squeeze1) but it is not going to be installed Depends: libxmu6:i386 (>= 2:1.0.5-2) but it is not going to be installed Depends: libxmuu1:i386 (>= 2:1.0.5-2) but it is not going to be installed Depends: libxp6:i386 (>= 1:1.0.0.xsf1-2) but it is not going to be installed Depends: libxpm4:i386 (>= 1:3.5.8-1) but it is not going to be installed Depends: libxrandr2:i386 (>= 2:1.3.0-3) but it is not going to be installed Depends: libxrender1:i386 (>= 1:0.9.6-1) but it is not going to be installed Depends: libxslt1.1:i386 (>= 1.1.26-6) but it is not going to be installed Depends: libxss1:i386 (>= 1:1.2.0-2) but it is not going to be installed Depends: libxt6:i386 (>= 1:1.0.7-1) but it is not going to be installed Depends: libxtst6:i386 (>= 2:1.1.0-3) but it is not going to be installed Depends: libxv1:i386 (>= 2:1.0.5-1) but it is not going to be installed Depends: libxxf86vm1:i386 (>= 1:1.1.0-2) but it is not going to be installed Depends: odbcinst1debian2:i386 (>= 2.2.14p2-1) but it is not going to be installed Depends: libodbc1:i386 but it is not going to be installed Depends: xaw3dg:i386 (>= 1.5+E-18) but it is not going to be installed php5 : Depends: libapache2-mod-php5 (>= 5.4.4-14+deb7u2) but it is not going to be installed or libapache2-mod-php5filter (>= 5.4.4-14+deb7u2) but it is not going to be installed or php5-cgi (>= 5.4.4-14+deb7u2) but it is not going to be installed or php5-fpm (>= 5.4.4-14+deb7u2) but it is not going to be installed php5-mysql : Depends: phpapi-20100525 E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. root@server:/home/# dpkg --print-architecture amd64 root@server:/home/# dpkg --print-foreign-architectures i386 root@server:/home/# lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.1 (wheezy) Release: 7.1 Codename: wheezy root@server:/home/# uname -a Linux servername 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux root@server:/home/# cat /etc/apt/sources.list deb http://ftp.us.debian.org/debian stable main contrib non-free

    Read the article

  • Affordable combined Ruby/Rails/Redmine + Subversion hosting?

    - by Pekka
    I'm a self employed web developer and after nine years of hard work, I'm looking to become a bit more "vagrant" starting next year, do some much-needed traveling and a bit and work off and on, making use of one of the greatest advantages of a programming job: The ability to work virtually from everywhere. For that, I am looking for a reliable hosting company I can entrust my code to in the form of a number of Subversion repositories, and an installation of the Redmine project management tool. As my financial situation may vary during traveling, I am looking for something I can pay up front for a year or two, and is obviously not too pricey. I don't care where the company is located, as long as it's trustworthy and solid, meaning it's not likely to go out of business next month. Does anybody know good recommendations? Preferably from own, personal, good experience. I have looked at CVSDude / Codesion and while they are certainly great, they don't offer Redmine of course, and seem to be aiming toward bigger organizations mainly. What I would need: 2-5 Gigs of space minimum, freely distributable between SVN, and Redmine attachments Unlimited number of Subversion projects Access control (team members / checkout-only accounts / etc.) I don't mind configuring the svn settings on file basis myself I need the possibility to map a custom domain to the package that is hosted elsewhere Frequent backups and access to those backups through FTP or other means I have been running my own virtual server for this until now, but I don't want the hassle, especially on the security side, while I may not always have the internet connection to fix problems that may come up.

    Read the article

  • ubuntu 10.04 + php + postfix

    - by mononym
    I have a server I am running: Ubuntu 10.04 php 5.3.5 (fpm) Nginx I have installed postfix, and set it to loopback-only (only need to send) The problem is it is not sending. if i issue (at command line): echo "testing local delivery" | mail -s "test email to localhost" [email protected] I get the email no problem, but through PHP it does not arrive. When I send it via PHP, mail.log shows: Mar 28 10:15:04 host postfix/pickup[32102]: 435EF580D7: uid=0 from=<root> Mar 28 10:15:04 host postfix/cleanup[32229]: 435EF580D7: message-id=<20120328091504.435EF580D7@FQDN> Mar 28 10:15:04 host postfix/qmgr[32103]: 435EF580D7: from=<root@FQDN>, size=1127, nrcpt=1 (queue active) Mar 28 10:15:04 host postfix/local[32230]: 435EF580D7: to=<root@FQDN>, orig_to=<root>, relay=local, delay=3.1, delays=3/0.01/0/0.09, dsn=2.0.0, status=sent (delivered to maildir) Mar 28 10:15:04 host postfix/qmgr[32103]: 435EF580D7: removed any help appreciated, my main.cf file: smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = FQDN alias_maps = hash:/etc/aliasesalias_database = hash:/etc/aliases myorigin = /etc/mailname #myorigin = $mydomain mydestination = FQDN, localhost.FQDN, , localhost relayhost = $mydomain mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = loopback-only virtual_alias_maps = hash:/etc/postfix/virtual home_mailbox = mail/

    Read the article

  • dpkg broken while upgrading Debian Etch to Lenny

    - by artvolk
    Good day! While trying to recover a box to lenny it seems I've broken things. It upgrades libc and glib after that dpkg seems to be broken. I can run apt-get, but it gets segmentation fault from dpkg: # apt-get -f install Reading package lists... Done Building dependency tree... Done 0 upgraded, 0 newly installed, 0 to remove and 316 not upgraded. 9 not fully installed or removed. Need to get 0B of archives. After unpacking 0B of additional disk space will be used. /bin/sh: line 1: 4606 Segmentation fault /usr/sbin/dpkg-preconfigure --apt E: Sub-process /usr/bin/dpkg received a segmentation fault. I can login via SSH but even ls is not working: # ls Segmentation fault Is there anything I can do remotelly via SSH? # ldd /bin/ls linux-gate.so.1 => (0xffffe000) librt.so.1 => /lib/tls/i686/cmov/librt.so.1 (0xb7fc8000) libacl.so.1 => /lib/libacl.so.1 (0xb7fc2000) libselinux.so.1 => /lib/libselinux.so.1 (0xb7fac000) libc.so.6 => /lib/i686/cmov/libc.so.6 (0xb7e51000) libpthread.so.0 => /lib/tls/i686/cmov/libpthread.so.0 (0xb7e3f000) /lib/ld-linux.so.2 (0xb7fd8000) libattr.so.1 => /lib/libattr.so.1 (0xb7e3b000) libdl.so.2 => /lib/i686/cmov/libdl.so.2 (0xb7e37000) libsepol.so.1 => /lib/libsepol.so.1 (0xb7df6000) It seems I've temporary fixed it with: # touch /etc/ld.so.nohwcap From here: http://saintaardvarkthecarpeted.com/blog/archive/2005/08/_etc_ld_so_nohwcap.html

    Read the article

  • How to back up a database with thousands of files

    - by Neal
    I am working with a Fedora server that runs a customized software package. The server software is quite old, and its database consists of 1,723 files. The database files are constantly changing - they continually grow and changes are not necessarily appended to the end. So right now, we currently back up every 24 hours at midnight when all users are off of the system and the database is in an internally consistent state. The problem is that we have the potential to lose an entire day's worth of work, which would be unrecoverable. So I'd like to know if there is a way to take some sort of an instantaneous snapshot of these database files that we could back up every 30 minutes or so. I've read about Linux LVM snapshots, and am thinking that I might be able to do accomplish the goal by taking a snapshot, rsync'ing the files to a backup server, then dropping the snapshot. But I've never done this before,so I don't know if this is the "right" fix. Any ideas on this? Any better solutions? Thanks!

    Read the article

  • how to setup a bridge with 2 NICs and few virtual machines

    - by Bond
    Here is my situation. I have a server with 2 NICs. I have installed virtual box and I have created a few Guest Operating Systems on it. I want these Virtual Machines to be using a bridge.NIC2 would be used to setup this bridge and NIC1 would be connected to corporate network.I am not clear with how should I go on doing this. /etc/network/interfaces is the file which I am trying to modify etc. My approach is following 1) Define a configuration file /etc/network/interfaces 2) Create IPTABLES as how NIC1 will forward the packets to Bridge on NIC2 Now comes the problem I do not understand what is the meaning of following lines in the configuration file auto lo iface lo inet loopback # The primary network interface auto eth2 iface eth2 inet manual auto br0 iface br0 inet static address 192.168.1.14 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.10 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.13.2 dns-search myserver.net bridge_ports eth2 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off So any pointers to what should be the entries of /etc/network/interfaces file. So that I understand which parameter is to be used when and where that would help me.

    Read the article

  • How to create a init.d script for openssh-server which was compiled and installed from source using configure + make + make install?

    - by Patrick L
    I have installed openssh-server in my Ubuntu PC using apt-get install openssh-server. The version is 5.9. Now, I would like to compile and install openssh-server version 6.2 from source codes. I have successfully downloaded the source codes, and run the following commands: ./configure make make install I found that the new version of openssh-server was installed into /usr/local/sbin/. The old version of openssh-server is in /usr/sbin/. I found that the service script in /etc/init.d/ssh is still pointing to /usr/sbin/. And the old openssh-server (v5.9) is still running. How can I replace the old openssh-server with the new openssh-server that I have just compiled and installed? How can I create a init.d script to start and stop the new openssh-server that I've compiled from source manually? How to start the new openssh-server on boot? When I install openssh-server using apt-get install, the config files will be installed into /etc/ssh/. If I compile and install it from source, where is the config file? If I compiled openssh-server from source, but I install openssh-client package using apt-get install, will there be any config files conflict? Thanks.

    Read the article

  • Install VirtualBox on Ubuntu 12.04.1 (on [Samsung] Chromebook)

    - by iphonedev7
    I have dual booted Ubuntu Linux 12.04.1 LTS on my Samsung Series 5 ChromeBook, and am trying to run/install Oracle VirtualBox (from the generic .run file downloaded from their website). However, every time I try to run it (as root from the command line), it gives me the following error occurs: Please install the build and header files for your current Linux kernel. The current kernel version is 3.4.0 Problems were found which would prevent VirtualBox from installing. I have tried the version from the Software Center, as well as the command line installation, both of which gave me errors based on my linux-headers/linux-kernel/linux-[kernel]-image. Here's an error I keep getting (on the command line): First Installation: checking all kernels... It is likely that 3.4.0 belongs to a chroot's host Building only for 3.5.0-18-generic Building initial module for 3.5.0-18-generic ERROR (dkms apport): kernel package linux-headers-3.5.0-18-generic is not supported Error! Bad return status for module build on kernel: 3.5.0-18-generic (x86_64) Consult /var/lib/dkms/virtualbox/4.1.12/build/make.log for more information. Setting up virtualbox-qt (4.1.12-dfsg-2ubuntu0.2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ...And one of the more cryptic errors I get when trying to start any Virtual Machine: Result Code: NS_ERROR_FAILURE (0x80004005) Component: Machine Interface: IMachine {5eaa9319-62fc-4b0a-843c-0cb1940f8a91}

    Read the article

  • Massive Memory Leaks?

    - by Mads
    Hi, I seem to have huge memory leaks, which are confusing me. I'm running fusion 3.1 / Windows 7 on Snow Leopard. It's a clean install with all upgrades applied. I've given fusion 8GB on a 14GB machine. I've installed VS2008 & Eclipse in Windows 7. Nothing unusual. Inside Task Manager in Windows 7, my memory footprint stays reasonable, at <2GB. But in OSX, Activity Monitor shows the footprint of vmware-vmx to be much larger. It starts at 2 GB, which seems fine, but whenever I'm actually doing anything in Windows, vmware-vmx's footprint grows at a few MB per second. After 20 mins or so it's using ~10GB and everything grinds to a halt. Throughout this, Task Manager still says I'm only using 2GB. And whatever I do in windows seems to increase vmware-vmx's memory footprint. Even closing down an application seems to make it go up. So is this par for the course in fusion? I was previously using parallels 3 / Vista under Leopard, and it worked fine. I'd assumed my new fusion config would work better, but this makes it completely unusable. (And apparently I can't even ask tech support unless I buy a support package...) Any advice much appreciated. Thanks

    Read the article

  • Patch management on multiple systems

    - by Pierre
    I'm in charge of auditing the security configuration of an important farm of Unix servers. So far, I came up with a way to assess the basic configuration but not the installed updates. The very problem here is that I just can't trust the package management tools on those machine. Indeed some of them did not sync with the repository for a long time (So I can't do a "yum check-updates" on Redhat for example). Some of those servers are not even connected to the internet and use an company repository. Another problem is that I have multiple target systems: AIX, Debian, Centos/Redhat, etc... So the version could be different (AIX) and the tools available will be different. And, last but not least, I can't install anything on the target system. So I need to use a script to retrieve the information and either: process it directly or save the information to be able to process it later on a server (Which may happen to run a different distribution than the one on which the information have been retrieved). The best ideas I could come up with were: either retrieve the list of installed packages on the machine (dpkg -l for example on debian) and process it on a dedicated server (Directly parsing the "Packages" file of debian repositories). Still, the problem remains the same for AIX and Redhat... or use Nessus' scripts to assess vulnerability on the installed packages, but I find this a bit dirty. Does anyone know any better/efficient way of doing this ? P.S: I already took time to review some answers to similar problems. Unfortunately Chef, puppet, ... don't meet the requirements I have to meet. Edit: Long story short. I need to have the list of missing updates on a Unix system just like MBSA on Windows. I'm not authorized to install anything on this system as it's not mine. All I have are scripts languages. Thanks.

    Read the article

  • Firefox cannot render icons from Font Awesome webfont set

    - by ADTC
    In Firefox (Windows 7), icons and glyphs that are called from the Font Awesome package do not render properly. An example of this can be seen on the Khan Academy website. Below the video the icons are shown as boxes with hex codes in them. This means that it isn't getting downloaded by Firefox. How it appears on Chrome (Windows 7), Safari (Mac OS X) and Stainless (Mac OS X): I found this question on Stack Overflow that may explain why this happens -- the CSS does use single quotes to enclose the font's src location. However, I don't have any write access to Khan Academy servers so I can't modify the actual website. I want to know if this can be fixed in Firefox, and how. I can run Greasemonkey scripts if that would help. I've already tried manually downloading the font and adding it to Windows' Fonts folder but this does not help. For reference, the CSS that sets this font up (not processed properly by Firefox) is: @font-face { font-family:'FontAwesome'; src:url('./fontawesome-webfont.eot'); src:url('./fontawesome-webfont.eot?#iefix') format('embedded-opentype'), url('./fontawesome-webfont.woff') format('woff'), url('./fontawesome-webfont.ttf') format('truetype'), url('./fontawesome-webfont.svg#FontAwesome') format('svg'); font-weight:normal; font-style:normal } [class^="icon-"]:before, [class*=" icon-"]:before { font-family:FontAwesome; font-weight:normal; font-style:normal; display:inline-block; text-decoration:inherit }

    Read the article

  • Encrypting peer-to-peer application with iptables and stunnel

    - by Jonathan Oliver
    I'm running legacy applications in which I do not have access to the source code. These components talk to each other using plaintext on a particular port. I would like to be able to secure the communications between the two or more nodes using something like stunnel to facilitate peer-to-peer communication rather than using a more traditional (and centralized) VPN package like OpenVPN, etc. Ideally, the traffic flow would go like this: app@hostA:1234 tries to open a TCP connection to app@hostB:1234. iptables captures and redirects the traffic on port 1234 to stunnel running on hostA at port 5678. stunnel@hostA negotiates and establishes a connection with stunnel@hostB:4567. stunnel@hostB forwards any decrypted traffic to app@hostB:1234. In essence, I'm trying to set this up to where any outbound traffic (generated on the local machine) to port N forwards through stunnel to port N+1, and the receiving side receives on port N+1, decrypts, and forwards to the local application at port N. I'm not particularly concerned about losing the hostA origin IP address/machine identity when stunnel@hostB forwards to app@hostB because the communications payload contains identifying information. The other trick in this is that normally with stunnel you have a client/server architecture. But this application is much more P2P because nodes can come and go dynamically and hard-coding some kind of "connection = hostN:port" in the stunnel configuration won't work.

    Read the article

  • Updating and deleting java (red hat / centos) (new)

    - by JochemTheSchoolKid
    I am a total noob with linux. So please explain clearly if you have a solution for me. I have an VPS and I want to update JAVA. I found a guide on the Java site which says: rpm -e < package_name I searched for the packages: [root@srv1 ~]# rpm -qa | grep java java_cup-0.10k-5.el6.x86_64 java-1.5.0-gcj-1.5.0.0-29.1.el6.x86_64 Than I tried to do the delete command [root@srv1 ~]# rpm -e java-1.5.0-gcj-1.5.0.0-29.1.el6.x86_64 error: Failed dependencies: java-gcj-compat is needed by (installed) java_cup-1:0.10k-5.el6.x86_64 java-gcj-compat >= 1.0.70 is needed by (installed) sinjdoc-0.5-9.1.el6.x86_64 What should I do now? Removing has worked thanks to the answer below Problem two! Now am I installing this package from java [root@srv1 java]# rpm -ivh jre-7u9-linux-i586.rpm Preparing... ########################################### [100%] 1:jre ########################################### [100%] Unpacking JAR files... rt.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/rt.pack jsse.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/jsse.pack charsets.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/charsets.pack localedata.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/ext/localedata.pack plugin.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/plugin.pack javaws.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/javaws.pack deploy.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/deploy.pack Can someone help me again with this?

    Read the article

  • Getting the number of frames from a video in Android

    - by Jay Patel
    I want to get the number of frames from a video. I'm using the following code: package com.vidualtest; import java.io.File; import java.io.FileDescriptor; import android.app.Activity; import android.graphics.Bitmap; import android.media.MediaMetadataRetriever; import android.os.Bundle; import android.os.Environment; import android.widget.ImageView; public class VidualTestActivity extends Activity { /** Called when the activity is first created. */ File file; ImageView img; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); img = (ImageView) findViewById(R.id.img); File sdcard = Environment.getExternalStorageDirectory(); file = new File(sdcard, "myvid.mp4"); MediaMetadataRetriever retriever = new MediaMetadataRetriever(); try { retriever.setDataSource(file.getAbsolutePath()); img.setImageBitmap(retriever.getFrameAtTime(10000,MediaMetadataRetriever.OPTION_CLOSEST)); } catch (IllegalArgumentException ex) { ex.printStackTrace(); } catch (RuntimeException ex) { ex.printStackTrace(); } finally { try { retriever.release(); } catch (RuntimeException ex) { } } } } In getFrameAtTime() I'm passing different static time values like 10000, 20000, etc. in milliseconds, but still I'm getting the same frame from the video. My goal is to get different frames with a different time interval.

    Read the article

  • Syntax error at '{'; expected '}' when using nagios in puppet

    - by jiangchengwu
    It's a big problem to me, because I'm not familiar with puppet. ERROR on the puppetmaster: debug: importing '/etc/puppet/manifests/nodes/group-1.pp' err: Could not parse for environment production: Syntax error at '{'; expected '}' at /etc/puppet/manifests/nodes/group-1.pp:6 ERROR on the puppet client: err: Could not retrieve catalog from remote server: Error 400 on SERVER: Could not parse for environment production: Syntax error at '{'; expected '}' at /etc/puppet/manifests/nodes/group-1.pp:6 in group-1.pp: node 'group1' { include ntp class { 'nagios::host': #this is line 6 nodename => $clientcert, appname => 'test', } } nagios::host in module module/nagios/host.pp code are here: class nagios::host($nodename, $hostgroup) { file { '/usr/lib/nagios/plugins': mode = "755", require = Package["nagios-plugins"], } ... @@nagios_service { "${nodename}_check_ssh": ensure => present, use => 'generic-service', host_name => "${nodename}", notification_interval => 60, flap_detection_enabled => 0, service_description => "SSH", check_command => "check_ssh", target => "/etc/nagios3/services.d/${nodename}.cfg", } } and the file module/nagios/init.pp is blank How could I fix it ?

    Read the article

  • Java: very slow tomcat and too big war file

    - by NaN
    I created some sort of RESTful API backend for a mobile app. It's written completely in Java using Jersey as Framework. At the moment no database is used, it's all in the memory, but this is no problem so far (it's only for prototyping purposes). I ordered the smallest package from digital ocean and installed tomcat7. All in all tomcat works, but I have three major problems: 1) It takes a long time until tomcat deploys the app: I deploy it per tomcat manager and it takes about 2 minutes unit the site works (excl. war upload time). 2) The war files are quite big (16MB): I don't know why they are so big. There are no database dependencies and most logic is written in plain java. Okay, we are using jersey, but 16MB are a lot for the logic of a small webservice. 3) I have to restart tomcat all 3 days or so. It looks like a memory leak or something similar. If the app runs for a few days the response time is quite high and the server seems to be frozen. It works again, if I restart tomcat per ssh. You can find my mvn pom file right here. Do you have some tips? Are there good tomcat alternatives?

    Read the article

  • How to allow users to transfer files to other users on linux

    - by Jon Bringhurst
    We have an environment of a few thousand users running applications on about 40 clusters ranging in size from 20 compute nodes to 98,000 compute nodes. Users on these systems generate massive files (sometimes 1PB) controlled by traditional unix permissions (ACLs usually aren't available or practical due to the specialized nature of the filesystem). We currently have a program called "give", which is a suid-root program that allows a user to "give" a file to another user when group permissions are insufficient. So, a user would type something like the following to give a file to another user: > give username-to-give-to filename-to-give ... The receiving user can then use a command called "take" (part of the give program) to receive the file: > take filename-to-receive The permissions of the file are then effectively transferred over to the receiving user. This program has been around for years and we'd like to revisit things from a security and functional point of view. Our current plan of action is to remove the bit rot in our current implementation of "give" and package it up as an open source app before we redeploy it into production. Does anyone have another method they use to transfer extremely large files between users when only traditional unix permissions are available?

    Read the article

  • Nginx + WordPress + HHVM: Why isn't Batcache working? Would Varnish help even more?

    - by javipas
    I've heard great things about HHVM, so I've setup a copy of WordPress blog (on another domain) with Nginx (with the Pagespeed module) and HHVM. Right now the benefits are obvious: on the same config, load times are between two and three times faster. I'm trying to speed up things a little bit, and I've also installed Memcached and Batcache. I've installed the memcached package, copied object-cache.php (Pastebin) onto the root folder of the WordPress blog, and after that I've installed the Batcache plugin and copied the advanced-cache.php (Pastebin) file onto the wp-content folder. Also, I've included the line define('WP_CACHE', true); in the wp-config.php file. It seems it doesn't work, though. If I quickly reload the page several times Batcache should show the cached page, but it doesn't. It's easy to check that by reloading (Cmd+R on Chrome on OS X) the page several times and then viewing the page's code. Under the <head> section I should see some batcache stats, but they aren't there. I wonder if someone could give me some hint on this. On a side note, I don't know if I could add some other component in order to help the performance be even better. I'm thing about Varnish, but I'm not sure if it's just useless and it's just another way to the same I'm currently doing. Any other component there? (I'll test CDN for images, minifying js, etc and some other tricks as well, but I'm talking from the server perspective).

    Read the article

  • Puppet : How to override / redefine outside child class (usecase and example detailled)

    - by alex8657
    The use case i try to illustrate is when to declare some item (eq mysqld service) with a default configuration that could be included on every node (class stripdown in the example, for basenode), and still be able to override this same item in some specific class (eg mysql::server), to be included by specific nodes (eg myserver.local) I illustrated this use case with the example below, where i want to disable mysql service on all nodes, but activate it on a specific node. But of course, Puppet parsing fails because the Service[mysql] is included twice. And of course, class mysql::server bears no relation to be a child of class stripdown Is there a way to override the Service["mysql"], or mark it as the main one, or whatever ? I was thinking about the virtual items and the realize function, but it only permits apply an item multiple times, not to redefine or override. # In stripdown.pp : class stripdown { service {"mysql": enable => "false", ensure => "stopped" } } # In mysql.pp : class mysql::server { service { mysqld: enable => true, ensure => running, hasrestart => true, hasstatus => true, path => "/etc/init.d/mysql", require => Package["mysql-server"], } } # Then nodes in nodes.pp : node basenode { include stripdown } node myserver.local inherits basenode { include mysql::server` # BOOM, fails here because of Service["mysql"] redefinition }

    Read the article

  • Windows XP / Outlook 2003 error messages

    - by AboutDev
    Can anyone help with this issue? I am trying to help someone and could use some expertise. Error Message #1: Microsoft Office Small Business Edition 2003 With CD icon "The feature you are trying to use is on a CD-ROM or other removable disk that is not available. Insert the 'Microsoft Office Small Business Edition 2003' disk and click OK. Use source: Microsoft Office Small Business Edition 2003" 1st got this message after CD was inserted to recover partial file STDP11N. Recovered STDP11N, however, still receiving pop up window with error message each time outlook opens. Had accidentally cleaned up old programs and suddenly this was missing. Reinstalled Microsoft Office Small Business Edition 2003 using install CD. Outlook worked buit keep getting error message pop up each time I open Outlook. Hit ok. Error Message #2: The path 'Microsoft Office Small Business Edition 2003' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'STDP11N.MSI' in a folder from which you can install the product Microsoft Office Small Business Edition 2003." Hit ok. Back to error message #1 Hit close window Error message #3: Error 1706. Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:\Program Files\Microsoft Office\ OFFICE11\1033\SETUP.CHM Error message #4 I'd created a file under D: drive on an external drive. "The path specified for the file D:...etc.. .pst is not valid. Hit ok. Brings up window to look in My Documents.

    Read the article

  • Windows XP / Outlook 2003 error messages

    - by AboutDev
    Can anyone help with this issue? I am trying to help someone and could use some expertise. Error Message #1: Microsoft Office Small Business Edition 2003 With CD icon "The feature you are trying to use is on a CD-ROM or other removable disk that is not available. Insert the 'Microsoft Office Small Business Edition 2003' disk and click OK. Use source: Microsoft Office Small Business Edition 2003" 1st got this message after CD was inserted to recover partial file STDP11N. Recovered STDP11N, however, still receiving pop up window with error message each time outlook opens. Had accidentally cleaned up old programs and suddenly this was missing. Reinstalled Microsoft Office Small Business Edition 2003 using install CD. Outlook worked buit keep getting error message pop up each time I open Outlook. Hit ok. Error Message #2: The path 'Microsoft Office Small Business Edition 2003' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'STDP11N.MSI' in a folder from which you can install the product Microsoft Office Small Business Edition 2003." Hit ok. Back to error message #1 Hit close window Error message #3: Error 1706. Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:\Program Files\Microsoft Office\ OFFICE11\1033\SETUP.CHM Error message #4 I'd created a file under D: drive on an external drive. "The path specified for the file D:...etc.. .pst is not valid. Hit ok. Brings up window to look in My Documents.

    Read the article

  • How can I prevent Apache from asking for credentials on non SSL site

    - by Scott
    I have a web server with several virtual hosts. Some of those hosts have an associated ssl site. I have a DirectoryMatch directive in my main config file which requires basic authentication to any directory with secured as part of the directory path. On sites that have an SSL site, I have a rewrite rule (located in the non ssl config for that site), that redirects to the SSL site, same uri. The problem is the http (80) site asks for credentials first, and then the https (443) site asks for credentials again. I would like to prevent the http site from asking and thus avoid the potential for someone entering credentials and having them sent in clear text. I know I could move the DirectoryMatch down to the specific site, and just put the auth statement in the SSL config, but that would introduce the possibility of forgetting to protect critical directories when creating new sites. Here are the pertinent declarations: httpd.conf (all sites): <DirectoryMatch "_secured_"> AuthType Basic AuthName "+ + + Restrcted Area on Server + + +" AuthUserFile /home/websvr/.auth/std.auth Require valid-user </DirectoryMatch> site.conf (specific to individual site) <DirectoryMatch "_secured_"> RewriteEngine On RewriteRule .*(_secured_.*) https://site.com/$1 </DirectoryMatch> Is there a way to leave DirectoryMatch in the main config file and prevent the request for authorization from the http site? Running Apache 2 on Ubuntu 10.04 server from the default package. I have AllowOverride set to none - I prefer to handle things in the config files instead of .htaccess.

    Read the article

  • Mount an VHD on Mac OS X

    - by janm
    Is it possible (how) to mount an VHD file created by Windows 7 in OS X? I found some information about how to do this on linux. There is a fuse fs "vdfuse" which uses virtualbox libs to mount filesystems supported by virtualbox. However I was unable to compile the package on osx because nearly all headers are missing and I doubt that it would work anyway... EDIT #2: Okay I got my hands dirty and finally compiled vdfuse (http://forums.virtualbox.org/viewtopic.php?f=26&t=33355&start=0) on osx. As a starting point I used macfuse (http://code.google.com/p/macfuse/) and looked at the example file systems. This led me to the following build script infile=vdfuse.c outfile=vdfuse incdir="your/path/to/vbox/headers" INSTALL_DIR="/Applications/VirtualBox.app/Contents/MacOS" CFLAGS="-pipe" gcc -arch i386 "${infile}" \ "${INSTALL_DIR}"/VBoxDD.dylib \ "${INSTALL_DIR}"/VBoxDDU.dylib \ "${INSTALL_DIR}"/VBoxVMM.dylib \ "${INSTALL_DIR}"/VBoxRT.dylib \ "${INSTALL_DIR}"/VBoxDD2.dylib \ "${INSTALL_DIR}"/VBoxREM.dylib \ -o "${outfile}" \ -I"${incdir}" -I"/usr/local/include/fuse" \ -Wl,-rpath,"${INSTALL_DIR}" \ -lfuse_ino64 \ -Wall ${CFLAGS} You actually don't need to compile VirtualBox on your machine, just install a recent version of VirtualBox. So now I can partially mount vhds. The separate partitions appear as block files Partition1, Partition2, ... on my mount point. However Mac OS X does not include a loopback file system and macfuse's loopback fs does not work with block files, so we need a loopback fs to mount the blockfiles as actual partitions.

    Read the article

  • Why can't I mount an image hosted on a read-only HFS+ partition via Boot Camp?

    - by deceze
    I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Boot Camp driver package includes file system drivers that enable Windows to access the Mac OS HFS+ partition. It's read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

    Read the article

< Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >