Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 289/750 | < Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >

• Windows XP installation problems

  - by Samurai Waffle

  I recently asked a question on here, and thought I had it working... Here is a link to it. Windows XP Installation problems So basically I'm having trouble getting XP installed. To sum it up, a computer I have had a boot sector virus, and I used Darik's Nuke and Boot to wipe the hard drive clean. So the hard drive has nothing on it. I had to try and install Windows through a DOS prompt, because for some reason it won't read it off the DVD. The UBCD is able to look at the files located on the DVD I have in, but I can't boot from it for some reason. So I extracted it to a USB drive, booted to DOS and started the setup process. Here's the weird thing with DOS... It can only find the C: drive. The C: drive in DOS is the flash drive that I have in, running DOS. I can't find the hard drive anywhere! So anyways, after starting the setup process, it copied the files over to the "hard drive" (which took 16 hours because the version of DOS I ran couldn't run smartdrv.exe), and it said the computer had to reboot. So I let it reboot, and it stopped and said there is no boot device. So I popped in UBCD that I have installed on a flash drive, and I discovered that it had copied the Windows files over to the flash drive and not the hard drive. It never asked where it should extract the files... So I toyed around with UBCD, ran a memory test on the hard drive to make sure it was fine, and it came out clean. So I'm stuck now. How can I get this installed? Writing this, I came up with an idea. If I copy the DOS startup files over to the hard drive, would I be able to start DOS from it? If so, I believe that could fix my problems. Any help is greatly appreciated, because I am running out of ideas and am at my wits end with this computer.

  Read the article

• BEAST (Browser Exploit Against SSL/TLS) Vulnerability on Port 25 for Postfix

  - by Abdul Haseeb

  I am failing a PCI Compliant scan. I have successfully used RC4 ciphers for Apache setup but my Postfix configuration is still not fixed. What TLS configuration should i use in my main.cf file. my current configuration is as follows # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes tls_preempt_cipherlist = yes smtpd_tls_protocols = !SSLv2 smtpd_tls_mandatory_protocols = !SSLv2, SSLv3 smtpd_tls_cipherlist = RC4-SHA:+TLSv1:!SSLv2:+SSLv3:!aNULL:!NULL smtp_tls_cipherlist = RC4-SHA:+TLSv1:!SSLv2:+SSLv3:!aNULL:!NULL smtpd_tls_security_level = encrypt

  Read the article

• What part of a computer can you "skimp" on?

  - by Paolo Bergantino

  So I'm thinking about building myself a new rig. I want to go for value more than anything, but I also want to get myself a nice enough setup that I can play the latest games considerably well. Last time I built a computer I skimped on the power supply and it bit me big time later on. I know the ideal answer is "don't skimp on anything", but are there are any parts of a computer you can do relatively well without having a particularly "good" component?

  Read the article

• LDAP NTLM interop [closed]

  - by pihentagy

  Hi! Our company uses NTLM to authenticate users. But there are a bunch of softwares with LDAP authentication support. So, is there a way to setup an LDAP server (preferably under WinNT), which can authenticate users via NTLM?

  Read the article

• How to set public SSH key for root user on server?

  - by amrnt

  I'm trying to follow Slicehost Document to setup my server. I reached SSH section. I made it as written, but when i logged out from root, i cant access root@IP_ADDRESS -p 30000 again! but i can access user@IP_ADDRESS -p 30000. So, the question is, how to set a public SSH key for root user? Thanks in advance!

  Read the article

• Tor in virtual machine - 502 bad gateway

  - by Kon

  I'm trying to run Tor in virtual machine. It used to work, but now when I try to access sites I get "502 bad gateway" error from Privoxy instead of requested site. I tried fixing time to correct one with date command but I still get 502 error. I use Virtualbox, Linux guest, and Tor+Privoxy setup.

  Read the article

• Custom DHCP Server on home network

  - by DanSpd

  Hello I have a computer network at my house which consists of two computers and one server. I have a software on dedicated server which requires direct connection to internet (port forwarding doesn't work for this). So I plan to setup network in following way. link text Please let me know if this will work. How good or bad could this be? Internet Connection: Verizon Fios 25/25

  Read the article

• Custom DHCP Server on home network

  - by DanSpd

  Hello I have a computer network at my house which consists of two computers and one server. I have a software on dedicated server which requires direct connection to internet (port forwarding doesn't work for this). So I plan to setup network in following way. link text Please let me know if this will work. How good or bad could this be? Internet Connection: Verizon Fios 25/25

  Read the article

• Snow Leopard can see Windows shares in Finder but can't connect

  - by Randy Miller

  I have an iMac with the latest version of Snow Leopard on it. I have a NAS drive and a Windows machine that both show up in the Finder's 'Shared' section. However, if I click on them, Finder says "Connection Failed". Clicking on 'Connect As...' gives an error dialog that says "The server 'blah' may not exist or it is unavailable at this time." Points of interest: All machines are receiving their IP/DNS info from the router using DHCP. I have a Mac Mini on the same network that connects to the NAS drive and windows machine perfectly with no config (i.e. worked out of the box). Both Macs are on the same version of Snow Leopard. There is no password required to access the NAS share. I've never setup a WINS server on any machines and all machines are using 'workgroup' by default. I've tried putting "workgroup" in the Mac's workgroup entry and have tried leaving it blank, neither solves the problem. Here are some things I have tried: Finder-Connect To Server: smb:///share. This works, but by name does not. Terminal-mount_smbfs //@/share share. This also works by ip, but not be name, resulting in "mount_smbfs: server connection failed: No route to host". If I put the IP address of the NAS in the WINS server entry in the Mac's network setup, I can connect by name. It obviously seems to be a name resolution error, but I can't figure out why. The only thing that has changed since it used to work is that I got a new router that now gives out DHCP (all machines are dhcp clients) addresses of 192.168.x.x, but used to be 10.0.x.x. I've grep'd through everything that might have saved that old address, but can't find anything. It's also worth noting that the second Mac (the one that connects successfully) was added to the network after the router change. Please let me know if there are additional points of information needed to troubleshoot this further. Thanks, Randy

  Read the article

• TOR hidden service - PHP or CGI - what is safely?

  - by Tai Chi Girl

  I want to setup TOR Onion hidden service with non-static pages. What should I use: Php or CGI? What is more safely? I don't want to reveal IP of machine - I live in China and I afraid goverment. I use linux, thttpd as webserver (thttpd, because someone told me, that Apache generate many IP informations in for example 404 sites).

  Read the article

• "tshark: There are no interfaces on which a capture can be done" in Amazon Linux AMI

  - by user1264304

  My goal is to capture packets with tshark in Amazon Linux AMI. While typing tshark in the command line there's an error: "tshark: There are no interfaces on which a capture can be done" How to implement the solution from Wireshark setup Linux for nonroot user $ sudo apt-get install wireshark $ sudo dpkg-reconfigure wireshark-common $ sudo usermod -a -G wireshark $USER $ gnome-session-quit --logout --no-prompt in Amazon Linux AMI (it's not Ubuntu)? Thanks.

  Read the article

• Can I make a BAT file that plays the next track (like multimedia keys)?

  - by Saebin

  I would also like to be able to play the previous track and play/pause. The problem is my keyboard doesn't have multimedia keys, so I want to setup hotkeys to do the same thing.

  Read the article

• Is it possible to use a laptop as an external monitor?

  - by Jephir

  I need to create a multi-monitor setup for my desktop computer but I have no additional monitors with me right now, aside from my laptop. Is it possible to use my laptop screen as an external monitor? Note that I am not trying to connect a monitor to my laptop, rather, I am trying to connect my laptop screen to a desktop video card (if this is possible).

  Read the article

• Does the DisplayPort on the Dell UltraSharp U2311H Monitor work with a MacBook Pro?

  - by GeneQ

  I'm thinking of getting the Dell UltraSharp U2311H monitor which apparently comes with a DisplayPort. (I used the word "apparently" because I find DisplayPort support a little bit too good to be true, coming from Dell. But great news nonetheless if it's really true) I plan to connect it to a Mac Book Pro (2010) via a mini DisplayPort to DisplayPort cable. Has anyone tried this setup? Does it work? Thanks.

  Read the article

• Monitor all and any internet traffic from my home PC - what should I use?

  - by Paul

  I would like to monitor all and any internet traffic from my home PC to see what programs installed on my home machine are accessing the internet. I thought I could use Fiddler for this but I noticed Firefox traffic doesn't show up by default, you need to do some setup. What should I use that will monitor all traffic?

  Read the article

• httpd 2.4 missing directives

  - by CraigH

  I just setup httpd 2.4 on an Amazone AMI and I noticed in the httpd.conf file there are alot of directives missing compared to a 2.2 conf file. For example: ServerTokens, Timeout, Server Signature, LoadModule are all not present. My question is, if they arent explicitly set in the httpd.conf file are they being set somewhere else? If not, what are their default values and why arent they in the conf file. Should I manually be setting these directives?

  Read the article

• How to ping ip dslam which is in other subnet

  - by vito

  I want to ping ip dslam, which is in another subnet The connection is like this: MyPc-----Rj45----------Adsl2+ Modem---------Rj11-------Dslam 192.168.1.4----192.168.1.1---172.80.1.3-------------172.80.1.2 -----------------LanSide-----------WanSide--------------------- The modem is set to Static Ip Address Encapsulation. How can I ping ip dslam with this setup, or what do I need to change about the architecture?

  Read the article

• Configure LAN Router To Prevent Illegal Torrenting?!

  - by Goober

  Scenario I have a typical broadband setup at home (It's a flatshare I have no control over who uses the house) and I want to prevent anyone using it from illegally downloading via torrents etc. Question Is there a way in which I can configure the router to block all forms of illegal downloads?

  Read the article

• How to use nginx to proxy to a host requiring authentication?

  - by bwizzy

  How can I setup an nginx proxy_pass directive that will also include HTTP Basic authentication information sent to the proxy host? This is an example of the URL I need to proxy to: http://username:[email protected]/export?uuid=1234567890 The end goal is to allow 1 server present files from another server (the one we're proxying to) without exposing the URI of the proxy server. I have this working 90% correct now from following the Nginx config found here: http://kovyrin.net/2010/07/24/nginx-fu-x-accel-redirect-remote/ I just need to add in the HTTP Basic authentication to send to the proxy server

  Read the article

• Problem installing SQL Server client tools

  - by Shiraz Bhaiji

  We are tring to install SQL Server 2005 Standard on Windows 2008 Standard both 64 bit. Have done this before with no problems. This time we get an error during the installation of client tools: There was an unexpected failure during the setup wizard Link Id 20476, message ID 50000 There are no errors in the event log. Anybody have any ideas what could be wrong?

  Read the article

• How to configure Transparent IP Address Sharing (TAS) on a Mediatrix 4102 with DGW 2.0 firmware?

  - by Pascal Bourque

  I am making the switch to VoIP. I chose voip.ms as my service provider and Mediatrix 4102 as my ATA. One reason why I chose the Mediatrix over other popular consumer ATAs is that it's supposed to be easy to place it in front of the router, so it can give priority to its own upstream traffic over the home network's upstream traffic. This is supposed to work transparently, with the ATA and router sharing the same public IP address (the one obtained from the modem). They call this feaure Transparent IP Address Sharing, or TAS. Their promotional brochure describes it like this: The Mediatrix 4102 also uses its innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow the PC (or router) connected to the second Ethernet port to have the same public IP address, eliminating the need for private IP addresses or address translations. I am interested by this feature because my router, an Apple Time Capsule, doesn't support QoS and cannot give priority to the voice packets if the ATA is behind the router. However, after hours of searching the web, reading the documentation, and good ol' trial and error, I haven't been able to configure the Mediatrix to run in this mode. Then I found a version of the manual that looks like it was for a previous version of the firmware (SIP), where there is an entire section dedicated to configuring TAS (starting at page 209). But my Mediatrix comes with the DGW 2.0 firmware, whose documentation does not mention TAS at all. So I tried to follow the TAS setup instructions from the SIP documentation and apply them to my DGW firmware, using the Variable Mapping Between SIP v5.0 and DGW v2.0 document as a reference, but no success. Some required SIP variables don't have an equivalent in DGW. So it looks like the DGW firmware does not support TAS at all, or if it does they are not doing anything to help us set it up. So right now, the Mediatrix is behind the router and VoIP works perfectly except when my upstream bandwidth is saturated. My questions are: Is downgrading to SIP firmware the only way to have my Mediatrix 4102 run in TAS mode? If not, anybody knows how to setup TAS on the DGW firmware? Is TAS mode the only way to give priority to the voice packets if I want to keep my current router (Apple Time Capsule)? Thanks!

  Read the article

• Noob proftpd questions

  - by Camran

  I have setup my VPS pretty much now, and want to upload some basic files to the server. How is this done in Ubuntu 9.10? I have PuTTY and use the terminal there... Is there any ftp program, like in regular managed hostings, to just upload files with? I was thinking about proftpd, but don't have a clue how to get it to work. I am using my home-laptop with windows xp to command the VPS. Thanks

  Read the article

• Noob proftpd questions

  - by Camran

  I have setup my VPS pretty much now, and want to upload some basic files to the server. How is this done in Ubuntu 9.10? I have PuTTY and use the terminal there... Is there any ftp program, like in regular managed hostings, to just upload files with? I was thinking about proftpd, but don't have a clue how to get it to work. I am using my home-laptop with windows xp to command the VPS. Thanks

  Read the article

• SharePoint domain authentication

  - by JL

  I have a local domain controller setup, which is MYDOMAIN.com, and on a seperate local server I have a MOSS site running. the DNS is all working fine but when I try to connect to the MOSS site using domain credentials I can't use syntax: MYDOMAIN/MyAccount it is expecting [email protected] What can I do to fix this issue, so I have normal domain login capabilities like every other sharepoint site out there?

  Read the article

• Why does Ubuntu 9.10 hang during boot at "Booting processor 1 APIC 0x1 ip 0x6000"?

  - by BraeburnDev

  I recently installed a new copy of Ubuntu 9.10 (Kernel 2.6.31-14) on to my Hp Pavilion dv6t, so I can setup a Linux development environment. The install went flawlessly and I proceeded with Ubuntu's udate manager's long list of updates (292 in all). I also setup a swap file and activated a Nvidia 185 driver for the Nvidia 260m GPU on the machine. After all this was done I restarted the computer and booted into Ubuntu this time with a newer 2.6.31-19 Kernel which was installed from the update manager. During booth the computer hung at this point: Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013136] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013141] ... version: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013142] ... bit width: 48 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013144] ... generic counters: 4 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013146] ... value mask: 0000ffffffffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013147] ... max period: 000000007fffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013149] ... fixed-purpose counters: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013151] ... counter mask: 000000070000000f Feb 24 14:23:12 braeburn-laptop kernel: [ 0.015539] ACPI: Core revision 20090521 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052264] Setting APIC routing to flat Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052639] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.152580] CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.270845] Booting processor 1 APIC 0x1 ip 0x6000 I can post a full kern.log of this boot process if requested. Hopefully this is enough information to go on. I should add that I'm still new to configuring and running a Linux OS although I know enough basic command line usage to do software development. This is my attempt to become more familiar with Linux and manage my own system. I'd like to get some insight on the nature of this system hang, what the problem is and how to resolve it. At this point I can scrap the install if I broke something, but my intuition says this is an issue with the kernel recognizing the correct hardware configuration for my system, or perhaps this is an issue with the APIC drivers managing Nehalem's new power management capabilities? Thanks for looking at this issue and providing feed back.

  Read the article

< Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >