Search Results

Search found 12829 results on 514 pages for 'hard'.

Page 290/514 | < Previous Page | 286 287 288 289 290 291 292 293 294 295 296 297  | Next Page >

• Command line, determine 64 or 32 bit?

  - by svnpenn

  I need to reinstall Windows on a laptop. I have the product key (its on the laptop), and I know it is Windows 7 Home Premium. I need a way to determine if 64-bit or 32-bit Windows is installed, so that I can download the correct one from Microsoft. The computer is messed up so I do not have access to Windows to check it with systeminfo. I took out the hard drive and hooked it to another computer, but when I run systeminfo it just gives information for the host computer, I did not see a way to change this.

  Read the article

• Dell Precision 670 no booting

  - by fristson

  Our dell running xp did not boot one day and was making a beep code I had a hard time finding on the internet. It was one of the RAM sticks so i replaced it. Before that i removed the motherboard battery to see if there was a problem with the battery. Now at start up it tells me that No Logical Drives Found and then BIOS not installed!. I have read over alot of post here and other places but everyone is talking about installation of the OS. I just want it to start with what it had. Please help.

  Read the article

• Can I install fresh Linux accross partitions (LUKS & LVM) and preserve/use existing home user?

  - by xtian

  With an existing LUKS encrypted logical volume partitioned hard disk dual boot to Windoz and Linux (Fedora 15), is it necessary to "start over" with the LUKS setup when upgrading the system? I recall some note about dividing the Linux installation over different partitions would help to preserve the home data in future update (I can't find this now) Before I try it, is this possible and intended use case for partitioning a Linux installation? # lsblk -fa NAME FSTYPE LABEL MOUNTPOINT sda [80G] +-sda1 [system W95 FAT 32] vfat +-sda2 ext4 /boot +-sda3 [52.4G] crypto_LUKS +-luks-de25ac97-6a32-4b79-a6a0-296a39376b3b (dm-0) LVM2_member +-cryptVG-root (dm-1) [21.5G] ext4 / +-cryptVG-swap (dm-2) [5.4MB] swap [SWAP] +-cryptVG-data (dm-3) [25.6G] ext4 /home

  Read the article

• Unable to read USB External HD after aborted back up

  - by Stjepan

  I have two PC laptops. On one of the two PC's (Win 7) I Aborted a back up and ejected the drive. Now that same pc wants to format the drive. I plugged the drive into the other pc (Win XP) and that one reads the drive and all data stored. Why does one want to format the drive and the other does not? .... My apologies for not being clearer with my original question and thanks for the responses, so; The drive is not a flash stick, its an external WD Hard drive plugged in via the USB. The two tips provided did not resolve the issue. Strangely, the pc with win XP can read the drive but the pc that the HD was plugged into when the backup was aborted still wants to format the drive. Stjep

  Read the article

• Trying to build a history of popular laptop models

  - by John

  A requirement on a software project is it should run on typical business laptops up to X years old. However while given a specific model number I can normally find out when it was sold, I can't find data to do the reverse... for a given year I want to see what model numbers were released/discontinued. We're talking big-name, popular models like Dell Latitude/Precision/Vostro, Thinkpads, HP, etc. The data for any model is out there but getting a timeline is proving hard. Sites like Dell are (unsurprisingly) geared around current products, and even Wikipedia isn't proving very reliable. You'd think this data must have been collated by manufacturers or enthusiasts, surely?

  Read the article

• xen virtual machines get to many porcentages of cpus

  - by ki0

  Hi everyone, This is my question. I have one Xen server with 8 CPU's and 6 virtual machine running, each virtual hard disk are running in diferent physical hardisk. Everything worked fine but sometimes one virtual machine get almost whole CPU, if the Domain-0 is 90% that is normal, the virtual machine is 500% usage of CPU. I have improved that it is not depends who are working with the VM even when nobody are working with the server this still happens. I dont know what happen. Anyone have any idea?¿ or anyone have happened the same?¿

  Read the article

• Transfer disk image to larger/smaller disk

  - by forthrin

  I need to switch the hard drive on a 2006 iMac to a new SSD. I don't have the original installation CDs. I know I can order CDs from Apple, but this costs money. Someone told me it's possible to rip the image of the old drive and transfer to the new drive. If so, does the size of the new drive have to be exactly the same as the old? If not, my questions are: Is it possible to "stretch" the image from 120 MB disk to a 256 MB disk (numbers are examples)? If so, what is the command line for this? Likewise, is it possible to "shrink" an image from a larger disk (eg. 256 MB) to a smaller disk (eg. 120 MB), provided that the actual space used on the disk does not exceed 120 MB? How do you do this on the command line?

  Read the article

• How to take backup mirror copies of C: drive?

  - by metal gear solid

  I've installed everything on my C: Drive . Whatever i need Windows 7, updated drivers and utilities and software etc i need. I now i want to take a backup mirror of everything in a DVD or i can keep backup in another USB HDD. so in case if i face any windows or hard-drive failure in future then i can restore everything as it is as all are today. I don't want to reinstall everything again Windows, Drivers all utilities and all needed soft-wares. My C: Drive's total capacity is 108 GB but data on c: drive is only 12 GB. What Should i do ? What is the best solution for me? I need free solution.

  Read the article

• Why can't I open programs after watching youtube videos for a while?

  - by manjivsanotsu

  I have recently built a new PC, and it worked fine for a while (1-2 months of no problems whatsoever). However in the recent weeks I noticed that after I watched some youtube videos and closed everything, I can no longer do anything except move the mouse and expand the Startup Menu. If I click on any of the programs on the Start Menu or type a program on the Run text box, it won't open anything. I can't open taskmgr, or windows explorer, or even shut down the PC. I don't have anything else running when I'm watching videos except ZoneAlarm and Avast. The only workaround I can do when this happens is a forced shutdown (holding the power button of my PC), and restart if I wanted to do anything more. But this happens a lot - about 4-5 times a week so I'm worried it would fry up my hardware if I keep on doing this. OS: Windows 7 Other Installed Software: Open Office, Tropico 4 game, Adobe Photoshop Browser used: Google Chrome Hardware: CPU: i7 2600K RAM: 16 GB Motherboard: Asus P8Z68-V GEN3 Hard Drive: 120GB Corsair Force GT SSD Graphics: 2047MB GeForce GTX 560 Ti

  Read the article

• IPv6 feature in Network Adaptor is Slowing Internet

  - by Teknophilia

  The past few days, my internet browsing has become very poor. It's not a matter of speed, as a speed test will give at least 15Mbps. It seems as if my laptop has a hard time actually connecting to the sites. I've found a possible culprit, but don't know why it would affect anything: Going to adapter settings and disabling ipv6, but leaving ipv4, my browsing is back to normal. Re-enabling ipv6 brings back the issue. This is strange though, because I have always had ipv6 enabled. Moreover, using sites to test ipv6 compatibility, I fail with ipv6 enabled on my adapter, and pass when it's disabled. Ideas about why this is happening, and how to fix it?

  Read the article

• In Linux, is it possible to get a listing of drives' disk space usage that also shows volume labels?

  - by DavidH

  I know about df, of course, but df does not output volume labels. I have 5 USB hard drives plugged into my NAS box, and would love to know which is which. Current df output: Filesystem Size Used Avail Use% Mounted on /dev/sda1 27G 2.2G 24G 9% / none 56M 476K 55M 1% /dev none 60M 0 60M 0% /dev/shm none 60M 332K 59M 1% /var/run none 60M 0 60M 0% /var/lock none 60M 0 60M 0% /lib/init/rw /dev/sde1 150G 102G 48G 68% /media/usb0 /dev/sdb1 299G 196G 103G 66% /media/usb1 /dev/sdc1 233G 183G 51G 79% /media/usb2 /dev/sdd1 233G 209G 25G 90% /media/usb3 /dev/sdf1 150G 101G 49G 68% /media/usb4

  Read the article

• Turning a running Linux system into a KVM instance on another machine

  - by Charles

  I have two physical machines that I wish to virtualize. I can not (physically) plug the hard drives from either machine into the new machine that will act as their VM host, so I think that copying the entire structure of the system over using dd is out of the question. How can I best go about migrating these machines from their hardware to the KVM environment? I've set up empty, unformatted LVM logical volumes to host their filesystems, with the understanding that giving the VMs a real partition to work with achieves higher performance than sticking an image on the filesystem. Would I be better off creating new OS installs and rsyncing the differences over? FWIW, the two machines to be VM'd are running CentOS 5, and the host machine is running Ubuntu Server 10.04 for no particularly important reason. I doubt this matters too much, as it's still going to be KVM and libvert that matter.

  Read the article

• Procedure for dual booting (2 copies of Win-7) off 2 partitions on same disk

  - by Sam Holder

  What procedure should I follow to set a dual boot (both Win-7 x64) on a machine where (ideally): Both operating systems will be installed on the same physical disk in different partitions When booting into either operating system the contents of the other OS partition disk will not be seen (this just seems safer) Other hard drives in the system will be visible by both OS's 1 copy of Win7 is already installed. Is it as simple as shrinking the existing volume and creating the partition, then sticking the CD in and booting off it and formatting the new partition and then installing another copy of windows onto the new partition? Or will that not work? Or are there gotchas?

  Read the article

• Unix like console for Windows (GIT)

  - by olo

  Currently I am using windows version git software for git, I found it is really hard to copy and paste in the console, and the mouse middle key is not supported. I used to putty SSH way to linux box then do things in putty, but at the moment I only have windows. so does anyone know some tools enable end-users have UNIX console ? Mouse middle key and highlight supported is essential. Thanks in advance for any advices. Update: Downloaded virtualbox then install a copy of Linux..then samba... seems making things complicated but handy.

  Read the article

• Store and Encrypt data over the internet.

  - by sotsec

  I am trying to build a system where I will be able to access my files remotely. I want to setup an external hard drive or a NAS that I will access over the internet, and I want every file that is stored on that system to be encrypted. Could you please suggest me what is the best way of doing that? Or if you have any knowledge, what is the best way to access your files remotely with maximum safety? but the same time the space that the files are allocated is protected against theft(encryption) etc. thank you

  Read the article

• Best ways to move a server room and 80 desktops to a new building

  - by Marko

  Need to plan the best way to physically move a server room (12 IBM x3400 towers) and all associated networking equipment to a new building. Everything is going, comms (80 strong call centre operation), desktops(80-90) the whole lot and has to be done efficiently over a weekend. What I cant seem to find are the best ways to move equipment, i.e is it best to remove hard drives and pack them separetely, do I pack the chassis' with foam and/or surround them in bubble wrap? Are there specific products designed to move computer equipment and where would I find these. The internet has failed me so far, please help

  Read the article

• Increase Volume of an MKV Video from Linux Terminal

  - by The How-To Geek

  I've got a large amount of .MKV video files which seem to all play at a very low volume - I end up having to turn the TV up all the way to hear them, which is really irritating when I switch to another channel and wake the dead because it's so loud. What I'm looking for is a command-line method to increase the volume (so I can run it on all of them quickly) that would hopefully work regardless of the audio codec in use in the particular file. (I don't mind hard-coding the output audio though). For reference, I'm using Ubuntu 9.04 on my server, and the files are being played back with Boxee on a Mac Mini, but the volume problem is the same on Windows too.

  Read the article

• Outlook 2013 Win 7 64 bit

  - by Rob P

  I am using Outlook 2013, and on some messages I can see the Other actions > View Source, but other messages I don't see it, I suspect somehow it has been disabled. Any suggestions as to how to see the source? I Tried adding a shortcut to this option to the Quick Bar list, on the messages in question, the shorcut disappears. I have also tried to alter registry, but I don't wnat to. I used to be able to right clight in the message to see the source, why is everything so hard now?

  Read the article

• ASUS N550 laptop not charging on ubuntu after updating kernel

  - by OBY Trance

  I'm using Ubuntu 13.10 on a pretty new ASUS N550jv laptop. When I was using kernel linux-image-3.11.0-11 everything was quite well (kinda..), however, when I updated the kernel using the automatic update, the kernels which were released afterwards (12+) were faulty on my machine, and caused the battery not to be charged and only stay at their current charging level (even when the machine was off!) The only fix I had was to roll-back to the '..11' version (on boot screen - advanced options), and hard-reboot (AC cord disconnected and reconnected) but now version 14 was released and "pushed away" the good old version 11. How can I fix that?? Please help me...

  Read the article

• Add custom command line to extended context menu in Windows 7

  - by 280Z28

  I have an application pinned to the task bar. 90% of the time, I run it with no additional command line options, so I can either click it (if not already open), or right click the icon and click the application name to open a new instance. I want to make it where when I right click it, there are 2 options listed: the first is the program with no command line options and the second is the one with a custom command line (that I hard code). If this is impossible, it would be tolerable to add it to the extended context menu (shift + right click the icon), but I prefer the former.

  Read the article

• HTTPS load balancing based on some component of the URL

  - by user38118

  We have an existing application that we wish to split across multiple servers (for example: 1000 users total, 100 users split across 10 servers). Ideally, we'd like to be able relay the HTTPS requests to a particular server based on some component of the URL. For example: Users 1 through 100 go to http://server1.domain.com/ Users 2 through 200 go to http://server2.domain.com/ etc. etc. etc. Where the incoming requests look like this: https://secure.domain.com/user/{integer user # goes here}/path/to/file Does anyone know of an easy way to do this? Pound looks promising... but it doesn't look like it supports routing based on URL like this. Even better would be if it didn't need to be hard-coded- The load balancer could make a separate HTTP request to another server to ask "Hey, what server should I relay to for a request to URL {the URL that was requested goes here}?" and relay to the hostname returned in the HTTP response.

  Read the article

• Override some DNS records and delegate others to another nameserver

  - by Addev

  I'm starting playing with nameservers. Currently I have: A domain: mydomain.com Access for writing the whois ns records. Access for writing DNS records at the domain hosting provider. nsX.foo.com A shared (hostC) hosting which cPanel writes in the nameserver of nsX.bar.com Basically I want the following structure: hostA.mydomain.com -> hostA hostB.mydomain.com -> hostB hostC.mydomain.com -> hostC mydomain.com -> hostC *.mydomain.com -> hostC Whats the correct way of configuring this? By the way I have configured the following records hostA.mydomain.com IN A [IP_OF_hostA] (at foo.com nameservers) hostB.mydomain.com IN A [IP_OF_hostB] (at foo.com nameserver) But now I dont know how to specify that @.mydomain.com and *.mydomain.com are resolved by the ns1.bar.com and ns2.bar.com, and it is hard to try with the delays after editing the records.

  Read the article

• Windows XP crashes by GT610 driver (nv4_disp)

  - by undone

  I have a PC which was working fine but one day screen went dark and nothing was shown. I thought the problem is graphic card, so I replaced it with new one. I bought a new graphic card (GeForce 610) and installed it on my system. I formatted my hard-drive and installed a fresh Windows XpSp3 and its drivers. Everything was fine but after installing graphic card's driver, I got an error saying windows got stuck in an infinite loop and it couldn't get out (in nv4_disp). I uninstalled it and downloaded its last version and installed it. Unfortunately, I got the same error and windows restated! Here's my system: Pascal Motherboard PT880PRO Intel CPU Windows XPSp3 I searched this issue on the internet and I found bunch of suggestions (from cleaning hardware to installing latest version of its driver) but nothing help! Any help would be appreciated! Thanks.

  Read the article

• Multi-machine backup solutions

  - by Paul

  I have a growing number of PCs and laptops in my home that need a backup solution. My question is 2 fold: Most commercial backup vendors appear to license by the machine, are there any products that give a license that can be used on all your machines, without a per machine cost? An alternative is to have a centrally controlled back up strategy controlled from a single PC with an attached hard drive that can back up other machines on the network. What backup software is suitable for this approach? Will this software be windows/Linux interoperable? I've searched for duplicate questions but don't see anything that addresses the multi machine/cost issue. OSs in network will be Windows (XP, Vista, 7) and Linux variants. Not pattern to when machines will be switched on.

  Read the article

• VMware snapshost issue

  - by Calcgod

  I am using VMware Fusion 2.0 on a Macbook Pro. I have allocated 20GB to a windows partition within VMware, and now wish to expand that. When I go to the settings for the hard drive it tells me: "These settings cannot be changed while the virtual machine has a snapshot. To make changes, first delete all snapshots." When I go to the snapshots settings nothing appears there besides the current state thumbnail. Is there a way to remove these "invicible" snapshots??

  Read the article

< Previous Page | 286 287 288 289 290 291 292 293 294 295 296 297  | Next Page >