Search Results

Search found 10789 results on 432 pages for 'cpu upgrade'.

Page 291/432 | < Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >

  • I suspect that my HDD is causing hardlocks, as all other components have been replaced. How can I check this theory and solve the potential cause?

    - by user867814
    I have had this problem over quite a while now, thorough multiple Linux kernel versions and distributions, as well as replacement of all components, aside from my main HDD - RAM, GPU(twice), mother board, CPU, power supply. What happens is, at one point during the operation of the PC, it will hardlock - everything stops working, external HDD is not shut down correctly and continues to spin until I plug it out and in, there are no system/kernel logs of any kind, and no otherwise nothing that would suggest a cause. Another reason for my suspicion is that the failures happen almost exclusively during HDD read/write activity - shutdown(happens nearly 1/3 of the time so far, it's only been few days though), launching programs, and once during operation of apt. I hope the post is descriptive enough, if you need any additional info, ask(and tell me how to prepare/obtain it), and I will provide. If I'm wrong, point me in the right direction. Thanks in advance.

    Read the article

  • Windows 8 Update on Bootcamp

    - by RazorSharp
    I currently have Windows 8 Consumer Preview installed on a Mac Bootcamp Partition. Microsoft recently released the Windows 8 Release Preview, and I'd like to upgrade, but I'm worried that upgrading to the Release Preview (while in the Windows 8 partition) will erase my other partitions (ex. the Mac OS X partition). By upgrading from Consumer to Release (using the installer on Microsoft's website) while IN the Windows 8 partition, will it end up re-formating the whole hard drive / erasing partitions / removing Mac OS X? Are there any 100% positive answers out there? Will this work, and if not then how would you suggest updating? Note: I have a Time Machine backup of my Mac, but it isn't the WHOLE Mac.

    Read the article

  • What VMWare should I choose?

    - by wbad
    I'm new to VMWare stuff. What I need to do is pretty basic: Just to install two different Windows 2008 versions on a server with 2x 4core CPU and 2x 3TB hard disks. I asked my datacenter to install the free version (VMware ESXi 4.1) but apparently it did not recognize 3TB disks. Now I'm wondering whether VMWare 5 can handle 3TB disks, and if so, what variant? There is a huge array of options there and some prices are astonishingly high: http://www.vmware.com/products/datacenter-virtualization/vsphere/pricing.html So I'm really confused and I appreciate your hints.

    Read the article

  • rsync stuck with the --checksum option

    - by billc.cn
    I use back-in-time to backup my Linux installation. It serves as an advanced wrapper for the rsync command. Today I tried to add /var/log to the list of folders to be backed up and it caused some serious performance problems. The job seems to stuck on a particular file and the CPU usage of the rsync parent process reaches 100%. I then used lsof to see which file caused the problem and it seems to be the /var/log directory. I did some googling and some experiments with the different rsync options and found --checksum to be the offender. Without the parameter, an incremental backup finishes properly in minutes. With it, the process will stuck when rsync tries to sync a constantly changing log file. This kind of make sense, but it still seems to be a bug to me. Am I using the option correctly? Is there a workaround for this?

    Read the article

  • Which is the recommended filesystem for VMware Server / ESXi?

    - by elitalon
    We have a couple of servers in office with VMware Server as virtualization solution. We are planning an upgrade of our infrastructure. Some servers will remain with VMware Server, but we want to migrate some others to VMware ESXi. In both cases we are making a fresh install, and I wonder if there any suggestion/guidelines regarding the host filesystem and its partitions. EDIT: We are using local storage instead of SAN/NAS external storage, because we are not sure if it is worth it to use them given our office size/requirements.

    Read the article

  • Mysql showing some high spikes

    - by user111196
    We one mysql server suddenly the access to it becomes slow of out sudden. So I read some place they said maybe due to var size is it? I am not too sure any idea how to check the root cause of it. The cpu is like nearly 150%. Any indication on it. I have tried this so far. du -sh * 4.0K account 67M cache 4.0K cvs 16K db 8.0K empty 4.0K games 4.0K gdm 148G lib 4.0K local 16K lock 624M log 0 mail 4.0K nis 4.0K opt 4.0K preserve 400K run 298M spool 4.0K tmp 359M www 12K yp

    Read the article

  • Few questions about backing up the OS

    - by user23950
    I'm running windows 7 with 2gb memory and 2.50 Ghz dual core cpu. here are my question regarding backing up an entire drive. I plan to use Macrium Reflect because its free. And I can't afford to buy one. If I backup a hard drive would I only be able to backup the partition where the operating system is? If I have installed applications which requires activation keys, and I have already installed an activation key. Does backing the hard drive also backup those application, so that I won't have to re-apply the keys later? If I have a multi-boot system, would the backup also include those other OS that are installed in my hard drive? Can I still boot into them after restoring the image? Do you have any links there that could enlighten me on what drive backup really is. Thanks!

    Read the article

  • mysql wont stop, mysqld_safe appeared in top

    - by power4
    my server (CentOS) contains lots of website, which collect data from lots of sources with cron. the mysql config is the default recently, PHP failed to communicate with mysql. Firstly I just restart the server but after restarted, PHP still failed to communicate with mysql I've tried: ps ax | grep mysql Then run: kill -9 #### (I've also tried killall -9 ####) - this failed, ps ax | grep mysql showing the killed process id is still there service mysqld start (I've also tried /etc/init.d/mysqld start) - I got reply Timeout error occurred trying to start MySQL Daemon. when run top, mysqld_safe is appeared on top with about 50% of CPU usage. I dont know the size of all the database. I really confused

    Read the article

  • How to remove permanent map of a network drive on OS X Lion?

    - by Flijfi
    Some time ago I mapped a network drive on my Snow Leopard Mac, which was upgraded to Lion. The network drive is not active any more and I receive popups all the time with the error: There was a problem connecting to the server XXXX. I have no idea how I configured at the time. I may have included a mount command, in a config file but I don't know any more where I did it. I reviewed the Preferences/Account/Login items and there is no permanent mapping there. OSX is updated as Nov 27,2011 and the issue is not related to the upgrade to Lion itself but to a misconfiguration. Any help will be greatly appreciated. (If you have the opposite problem, here is the link to solve it: Permanently map a network drive on Mac OS X Leopard)

    Read the article

  • Updating a modified Prestashop

    - by Emphram Stavanger
    I don't know if this is the proper forum for this; didn't really seem like a Stack Overflow question, so if I'm in the wrong here, do point me to the correct SE site. Anyway, I have a Prestashop 1.4.7.3 installed on a CentOS 5 machine. Recently, they released the 1.5.0 version, which I'd like to upgrade to. However, during developing a rather customized theme for it, I had to modify the core files (and yes I know how stupid this was, and probably even more stupid that I didn't keep a list of modified files). What's done is done though. So now I'm faced with a problem; I need to update, but I don't want it to overwrite my modifications. Is there a way (preferably in the console) to do a diff between my current installation and 1.4.7.3 vanilla, to get a list of files that are modified (sans the themes folder, perhaps)?

    Read the article

  • A require a server hosting package that would be suitable for several .net managed applications, accessed only by me

    - by user67166
    Hello, I currently run a server at home consisting of SQL Server 2008 .net Framework 2010 VPN Connection ASP.net Web Services running around 5-6 applications supporting a financial trading system that i regularly use. THe only user is me. Recently the requirement to have these applications running in a 24/7 100% uptime (or 99%) environment has become important. No longer can I both meet this requirement and host my server at home on my network - so i am looking to move to a dedicated hosting company. After some research, the only real companies I can find offering such services are geared towards company web-space hosting. I don't need 1TB+ bandwidth, what i need is CPU, Memory and as much control over the environment as possible. Does anyone have any examples of such a service? Thanks in advance.

    Read the article

  • Open source monitoring tool without sending data to "Their Server"

    - by hangu
    I trying to use open source server monitoring tool. I know there are a lot, but I couldn't find what I need.. the basic process of monitoring tool I used to use before was, 1) Install agent in my server which I want to monitor 2) The agent send data to "their server" 3) I can check the health of my server through web browser presented by them. What I need is, avoiding "Step 2". Are there any monitoring tool that I can use? I have Windows 2008 and Linux servers simple feature will be enough like (CPU, Memory, Network..) Thank you

    Read the article

  • Is it possible to extend the Active Directory schema in a Windows 2003 DC (NOT R2) to support DFSR?

    - by JohannesH
    We're in the process of installing a brand new Windows Server 2008 Web cluster and we would like to synchronize some files between the servers. The problem is that the DC in the domain is an old Windows Server 2003 Standard (NOT R2) which apparently doesn't contain some extension to the AD schema. Is it possible to upgrade the schema without upgrading the DC servers to R2? When I try to create a Replication Group on the 2008 Server I get the following message: --------------------------- Error --------------------------- srv.XXXXXX.XX: The Active Directory Domain Services schema on domain controller activedc07.srv.XXXXXX.XX cannot be read. This error might be caused by a schema that has not been extended, or was extended improperly. See Help and Support Center for information about extending the Active Directory Domain Services schema. Schema version 30 is not supported. --------------------------- OK ---------------------------

    Read the article

  • Computer won't start when connecting SATA HDD

    - by vlad
    I just bough a new HDD some time ago and recently i bought another SATA cable to have both HDDs connected at the same time, to transfer all the files from the older one to the newer. When i connected both of them, the computer started working, i tapped F2 to go to bios to make sure it was detected, and then after 5-10 seconds the computer instantly shut down. After this incident, my computer won't start at all when connecting the SATA power supply to the old HDD. If i connect only my new drive, it works without any problem. If i connect only my old drive, or both the old drive and the new one, and then push on the power button, the cpu fan simply rotates about 5 degrees and then stops.. and that's it, the computer doesn't start, and no sound from the pc speaker either. Is there any way to recover my files from the old HDD and transfer them to my new one? I do not want to use the old HDD any more, i only need to save all my files.

    Read the article

  • Why I'm unable to use up/down arrows in my BIOS?

    - by nexus
    My BIOS is loading and when I wanted to change anything, the up/down arrows aren't working. What might be the problem? I want to change boot options, but I'm unable to select the boot from CD option. My BIOS version is f2.3. Do I need to upgrade it? I need my system for 2 more months continuously and I'm afraid if there might be some problem upgrading. But anyway, what might be the cause for this behavior? For you info I have the pavilion dv6 series laptop, BIOS version: f.23 processer: Intel(R) core(TM) i3 CPU M 370 @ 2.40ghz 2.40GHZ 2.40 GHZ

    Read the article

  • Configure Linux server hardware buttons for soft reset or power cycle?

    - by Jakobud
    I have a small modest CentOS server at home. I run it headless because anytime I access it, it's always via SSH. Anyways, tonight it became unresponsive to the network. I could not connect to it to investigate. In this case, I have to hook up a keyboard and monitor to see the problem. I ended up just rebooting it. But after this experience, I was wondering if it's possible to configure the hardware buttons on the CPU case to perform a graceful reboot or graceful power cycle in Linux. Even though the server becomes unresponsive once in a blue moon, it would be nice to simply press a button and have it shutdown all services and gracefully reboot. Anyone know how this could be accomplished?

    Read the article

  • My Computer will not turn on?

    - by user269120
    I recently built a gaming pc. It was working fine before the following events: I installed a graphics card driver update then: in windows it said that the user experience index needed to be refreshed, so i started the test and somewhere in the middle of the test my pc just switched off. No shutting down just stopped. Now it won't turn back on. I have checked its plugged in and the switch on psu is down, i tried a different power cable and i checked all the connections. When i press the power button nothing happens, no fans no lights no post beep. Computer Parts: Motherboard: Gigabyte GA78LMT-USB3 CPU: AMD FX-6350 @ 3.9 Ghz RAM: 2x4gb Crucial Ballistix Sport Power Supply: Tesla 750w psu Graphics card: XFX Radeon 7870 DD Case: CiT Vantage R Gaming Case Hard Drive: 2TB Western Digital Caviar Green Please help me, this computer is only a week old since i built it. All anwsers are appreciated :)

    Read the article

  • Best Linux distro for media server on older box

    - by fauxpride
    I have an older machine with these specs: CPU: AMD Athlon X2 @ 2,8 Ghz, 2MB L2 RAM: 4 GB DDR2@ 800 Mhz GPU: Asus 4890 TOP 1 GB I want to turn the machine into a media server via XBMC (so good video and wireless peripherial driver support would also be a plus), but I also want to use it as an OpenVPN server so I can tunnel RDP to my other Windows machine in the network. I mostly want to use a Debian based distro (for the convenience of apt) and right now my options are: Ubuntu, Xubuntu or Mint. Which one do you think is more fitting? Thanks in advance.

    Read the article

  • tar gzip slowing down server

    - by Josir
    I have a backup script that: compress some files generate md5 copy the compressed file to another server. the other server finishes comparing MD5 (to find copy errors). Here it's the core script: nice -n 15 tar -czvf $BKP $PATH_BKP/*.* \ | xargs -I '{}' sh -c "test -f '{}' && md5sum '{}'" \ | tee $MD5 scp -l 80000 $BKP $SCP_BKP scp $MD5 $SCP_BKP This routine got CPU at 90% at gzip routine, slowing down the production server. I tried to add a nice -n 15 but server still hangs. I've already read 1 but the conversation didn't help me. What is the best approach to solve this issue ? I am open to new architectures/solutions :)

    Read the article

  • Using external monitor and screen resolution?

    - by Johnydep
    it might sound very basic question but i need some help. I have lenovo Ideapad y560p which offers a maximum resolution of 1366px x 768px. Now i am planning to buy an external monitor, and i short listed some FULL HD resolution monitors, but it is my understanding that even with FULL HD, i would only achieve the best resolution my laptop supports. Is it true? And also if this is the case, should i really go for an HD monitor or settle down with a lower resolution version? 2ndly, is there any way to increase resolution with simple upgrade? or it is not possible without voiding the warranty??

    Read the article

  • how to manage a multi user server on linux?

    - by user1175942
    I'm working on a university project, where I have Tomcat as a web server, and I want to create a multi user environment on top of linux, so every user that logs into my website has his own credentials, and he can access only his own data (files and folders...). The main issue is that the purpose of the website is executing code on the server-side, so I must have a good (reasonable) protection against malicious code. (a user destroying his own user is fine by me) I thought that defining a linux-user for every website-user is the best solution - it isolates each user from the other, and I can define each one's permissions. Can I create users in linux using shell commands? Can I configure max quota/memory/cpu for a user? Anyone has another idea for managing that kind of multi-user environment?

    Read the article

  • nagios service check

    - by DRH
    I am new to nagios and we have a small issue I need to ask assistance with. Many of the machines that we monitor can go unresponsive for a bit when some very intensive cpu tasks are run. This makes nagios send warnings and alerts while these hosts are busy reporting things like 'ping timeout' or 'zombie processes' and even swap space warnings, but in actuality there is not a problem. Is there a way to configure nagios to not send such alerts, but check x number of times over a period of time and only then send an alert at the end of that time if the server in question has not recovered?. Looking at the commands.cfg file, I see entries like this: define command{ command_name check_local_swap command_line $USER1$/check_swap -w $ARG1$ -c $ARG2$ } How could I modify this example to accomplish what I want above. Thanks

    Read the article

  • Virtualizing Windows with VT-d to play within it

    - by Bahaïka
    I would like to know if what I want to is possible. First, here is my hardware configuration : MB : Gigabyte H77-DS3H Intel Core i5 3330 (3.00GHz) MSI Nvidia GTX 760 8 Gb RAM 1333 MHz What I want to do is to have a linux (probably ArchLinux) as a main and unique OS on my computer (I don't want a dualboot). And virtualizing Windows under Linux. I've read about VT-d (supported by my CPU) and PCIBackHide. I'd like to know if I can initialize Linux with the Integrated Graphics and Virtualize Windows to use the GTX 760. If I can do it, where do I have to plug my two screens ? On the MainBoard or the GTX 760 ? How do I achive that idea ?

    Read the article

  • Windows 7 100% Memory Usage (without any process listed as using that much memory)

    - by Paul Tarjan
    When I plug my external USB 2TB hard drive into my windows 7 box, my RAM usage climbs up to all 4 Gigs (but in task manager it shows that all process are small) and the hard drive is churning like crazy. My CPU is only about 20% utilized All I can think of is there is a Virus scanner or an indexer running like crazy. I've tried to kill all virus scanners (AVG and Windows Security Essentials) and it still keeps going. My computer is completely unusable as everything is constantly swapping. I've tried leaving it on for 2 days now and it still hasn't finished whatever it was doing. Any ideas?

    Read the article

  • Is it possible to extend the ad schema in a Win2003 DC Server (NOT R2) to support DFSR?

    - by JohannesH
    we're in the process of installing a brand new Windows Server 2008 Web cluster and we would like to synchronize some files between the servers. The problem is that the DC in the domain is an old Windows Server 2003 Standard (NOT R2) which apparently doesn't contain some extension to the AD schema. Is it possible to upgrade the schema without upgrading the DC servers to R2? When I try to create a Replication Group on the 2008 Server I get the following message: --------------------------- Error --------------------------- srv.XXXXXX.XX: The Active Directory Domain Services schema on domain controller activedc07.srv.XXXXXX.XX cannot be read. This error might be caused by a schema that has not been extended, or was extended improperly. See Help and Support Center for information about extending the Active Directory Domain Services schema. Schema version 30 is not supported. --------------------------- OK ---------------------------

    Read the article

< Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >