Search Results

Search found 35892 results on 1436 pages for 'a different ben'.

Page 293/1436 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >

• Is it dangerous to add/remove a hard-drive to a Windows machine which is in stand by?

  - by Adal

  Can I add a SATA drive to a Windows 7 machine which is in standby mode? The hardware supports hot-plug. Could pulling the drive out while in standby corrupt the data on the drive (unflushed caches, ...)? Does Windows flush before standing by? How about swapping a drive with another drive of different kind (SSD - mechanical disk) and size, also while in stand-by. Could the OS when waking up believe that the old drive is still there, and write to it and thus corrupt it, since the new one has different partitions and data?

  Read the article

• Using a Dell PowerConnect to set up load balancing/redundancy, 1 switch 2 routres 2 private wan link

  - by MarianoC

  Hi, We have different locations connected by two different WAN providers. Each site has a dell powerConnect 6224 and two cisco routers with the WAN connections (we don’t have access to router admin). The 6224 connects to each cisco LAN port and to our LAN backbone. We would like the 6224 provide the ip gateway address and load balance and support redundancy, if one of the routes fail. Is this possible?. We can't find any samples on doing this and we have tried with no success. Any help or link to documentation regarding this, will be greatly appreciated. Thanks, MarianoC

  Read the article

• How two use 2 subnets on one network

  - by BGuy2010

  I have some servers at a colocation. They've given us an IP range,subnet,and gateway. Now we have run out of IP's and they've given us a new range of IP's but with a different subnet and gateway. We have a Juniper NetScreen firewall and a load balancer, and I am not sure how to proceed in order to be able to use these new IPS that are on a different subnet. Do I need to setup a new VLAN? on our firewall? I tried adding one of the new IP's on one of our servers, with the new subnet and gateway. I could ping the alternate gateway, but could not ping the assigned IP from outside or from inside.

  Read the article

• Multiple public keys for one user

  - by Russell

  This question is similar to SSH public key authentication - can one public key be used for multiple users? but it's the other way around. I'm experimenting on using ssh so any ssh server would work for your answers. Can I have multiple public keys link to the same user? What are the benefits of doing so? Also, can different home directories be set for different keys used (all of which link to the same user)? Please let me know if I'm unclear. Thanks.

  Read the article

• Forwarding Gmail

  - by diep

  Can I forward a particular incoming Gmail to 2 different alternate accounts? How?

  Read the article

• What can impact the throughput rate at tcp or Os level?

  - by Jimm

  I am facing a problem, where running the same application on different servers, yields unexpected performance results. For example, running the application on a particular faster server (faster cpu, more memory), with no load, yields slower performance than running on a less powerful server on the same network. I am suspecting that either OS or TCP is causing the slowness on the faster server. I cannot use IPerf , unless i modify it, because the "performance" in my application is defined as Component A sends a message to Component B. Component B sends an ACK to component A and ONLY then Component A would send the next message. So it is different from what IPerf does, which to my knowledge, simply tries to push as many messages as possible. Is there a tool that can look at OS and TCP configuration and suggest the cause of slowness?

  Read the article

• MS-Outlook add-on to move a new message to the same folder as the rest of the thread

  - by Guss

  I'm forced to use MS-Outlook in my job, while I very much like the feature that shows all the messages of a discussion thread (that are stored in different folders) in the inbox when a new message is received for that thread, if the previous messages are in a different data file (which I'm forced to have as the MS-Exchange server quota is very very small) then the message list only shows the name of the data file and not the name of the folder where the messages are stored. As a result, because I file my message by context (i.e. all the emails for project A go into a "Project A" folder, etc), and its important for me to have all the messages in a single thread in the same folder, it is sometimes hard to figure out into which folder should I file the new message. It would be great help if there was some add-on or VBA script that I could add to my setup that will offer a shortcut key or a button to "file this message to the same folder as the previous messages in the conversation thread".

  Read the article

• How can I fix a date that changes by 4 years and 1 day when pasted between Excel workbooks

  - by lcbrevard

  In Excel dates are represented internally by a floating point number where the integer part is the number of days since "some date" and the fractional part is how far into that day (hence the time). You can see this if you change the format of a date - like 4/10/2009 to a number 39905. But when pasting a date between two different workbooks the date shifts by 4 years and one day!!! In other words "some date" is different between the two workbooks. In one workbook the number 0.0 represents 1/0/1900 and in the other 0.0 represents 1/1/1904. Where is this set and is it controllable? Or does this represent a corrupted file? These workbooks where originally from Excel 2000 but have been worked on now in Excel 2007 and Excel 2003. I can demonstrate the problem between the two workbook files in both 2003 and 2010. The exact history of when they were created or what versions of Excel have been used on each is unknown.

  Read the article

• What applications is NTFS preferable for? [closed]

  - by javano

  When building a new server I prefer to deploy Linux as my OS of choice. This gives me the luxury of being able to choose from various file systems (amongst other aspects), and I will choose a different FS for different servers, depending on what they will be used for. With Windows OS variants you can only use NTFS. Have any benchmarks or tests been performed that have shown NTFS to be a preferable choice for a given scenario or application (apart from just "running Windows" because it has to be on NTFS). To clarify what I mean; I might use filesystem X for large transactional storage volumes, but filesystem Y for front end web app servers. If I had a multi-platform application to deploy that (let's pretend) was available on Mac/Win/Lin, is there any type of application or scenario that would benefit from being on NTFS?

  Read the article

• Setting up virtual network in VMware workstation

  - by Saif Bechan

  I am playing around with VMware workstation and am trying to set up a small virtual network. I am having a little trouble with this I hope somebody can help me out. I want to have all the different virtual machines to have different internal IP adresses so I can ping them SSH etc, from within my windows machine. I am directly connected to the internet without a router, so using a bridged connection does not seem to work. The other options NAT and host-only do not seem to work also. I think i need to create a new adapter. I am testing this out with a virtual image of linux debain 5.0 lenny. I have WMware Workstation 7 with virtual network editor. Can anyone guide me in the right direction.

  Read the article

• Several border firewalls in the same network

  - by nimai

  I'm currently analyzing the consequences of multipath connections for the firewalls. In that context, I'm wondering if it's really uncommon to have several firewalls at the borders of a network to protect it. The typical case I'd imagine would be a multihomed network, for which the administrator would have different policies for links from different (or not) ISPs. Or maybe even in an ISP's network. What would be the practical (dis)advantages of such a configuration? Could you provide an example of an existing topology using several border firewalls?

  Read the article

• Export policy configuration from eTrust ITM 8.1

  - by grub

  Hi everyone. Currently we are using the Enterprise AV Solution eTrust ITM 8.1. The licenses are running out in october and we are going to replace eTrust with another AV solution. The eTrust Server is running on Windows Server 2003 SP2 with an MS SQL 2000 Standard Edition. The problem is that we've got many different policy - sets which we have to redefine in the new AV solution. Is there any way with eTrust ITM 8.1 to export the different policies as csv, pdf ... whatever? I really dont want to do that manually (that would mean one print screen after the other ;-) ) Thank you very much. grub

  Read the article

• Virtual box host-only adapter configuration

  - by Xoundboy

  I have VirtualBox 4 running on Win 7 with a Centos 6 guest VM set up for hosting my dev server. When I'm connected to my home network the guest can be accessed via a static IP address that I configured (192.168.56.2), but not when I'm in the office. I'm guessing that the DHCP server in the office doesn't have a gateway configured for the 192.168.56.x IP range. I read something about the VB host-only adapter that should allow me to set this guest VM up in such a way that I don't need to be on any network to be able to access the guest from the host using a static IP. I've not been able to find out exactly how to configure this though. Can anyone give me an example configuration, thanks. UPDATE: Thanks for your responses. I've now set up a single virtual network adapter in VirtualBox and set it to host-only: C:\Users\Ben>vboxmanage list hostonlyifs Name: VirtualBox Host-Only Ethernet Adapter GUID: d419ef62-3c46-4525-ad2d-be506c90459a Dhcp: Disabled IPAddress: 192.168.56.2 NetworkMask: 255.255.255.0 IPV6Address: fe80:0000:0000:0000:78e3:b200:5af3:2a57 IPV6NetworkMaskPrefixLength: 64 HardwareAddress: 08:00:27:00:94:e8 MediumType: Ethernet Status: Up VBoxNetworkName: HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter On the guest I've set up eth0 to use the same IP address as the host-only adapter (192.168.56.2) but when I try to log in using Putty I still get "Network Error : connection refused". VirtualBox DHCP servier is enabled but I can't ping the gateway (192.168.56.1) from either host nor guest. There's no firewall running on either OS. What next?

  Read the article

• Odd FTP ASCII/BINARY transfer behavior after migrating to a new server

  - by Incognita Mundi

  I recently got a dedicated server and after migration to the new machine I started noticing problems with file transfers. My FTP client, despite being set to auto, keeps uploading php files in binary mode and the content of those files is messed up. Since I mostly upload files of different kinds it would be annoying to change from binary to ASCII every single time, beside, I never had such problems. What could be the cause of this behavior? My dedicated server runs CENTOS 6.4 and the ftp server is Pure-FTPd. I tried different FTP clients and they all have the same problem so I assume is soem misconfiguration on the server side. Thanks

  Read the article

• When RDP as a Domain User, Smart Card Requested

  - by Paul

  My W8 machine is connected to domain zen. If I rdp to the W8 machine, I can log in as a local user without problems. If I try to log in as a domain user, I am prompted for a smart card instead of a password. Any ideas why? Note that Interactive login: require smart card is disabled in group policy: And here is the output from rsop.msc: Some additional information on this one. If my connecting machine is on the same domain/network as the W8 machine, then I am prompted for a password as usual. If the machine is remote, on a different domain, then I am prompted for a smart card. In addition, the machine I am connecting from that gets the smartcard prompt is an XP box. I haven't isolated exactly which of these factors triggers the different response.

  Read the article

• What is the best file system to use for a second hard drive when dual booting between WinXP and Win7

  - by Corey

  I am dual booting for legacy reasons, and I have a 2nd internal drive that I would like to use from both XP and 7. Should I go with the standard NTFS? (will the secuirty features be an issue, with different SIDs from the different users) Should I go with FAT32? Should I try out the new exFAT? Also, I curently have two of my 3 drives as "dynamic disks" and 1 spaned volume created on them. (i did this from XP) Win7 can see them/it fine. Is this an ok thing to do?

  Read the article

• What is the best file system to use for a second hard drive when dual booting between WinXP and Win7

  - by Corey

  What is the best file system to use for a second hard drive when dual booting between WinXP and Win7? I am dual booting for legacy reasons, and I have a 2nd internal drive that I would like to use from both XP and 7. Should I go with the standard NTFS? (will the secuirty features be an issue, with different SIDs from the different users) Should I go with FAT32? Should I try out the new exFAT? Also, I curently have two of my 3 drives as "dynamic disks" and 1 spaned volume created on them. (i did this from XP) Win7 can see them/it fine. Is this an ok thing to do?

  Read the article

• nginx caching per user agent

  - by Tuinslak

  I'm currently using nginx as reverse proxy with caching enabled. However, the main site has two different layouts, depending on the user-agent (mobile or not). I've tried something similar to this: # mobile users if ($http_user_agent ~* '(iPhone|iPod|mobile|Android|2.0\ MMP|240x320|AvantGo|BlackBerry|Blazer|Cellphone|Danger|DoCoMo|Elaine/3.0|EudoraWeb|hiptop|IEMobile)') { set $iphone_request '1'; } if ($iphone_request = '1') { proxy_cache mobile; } if ($iphone_request = '') { proxy_cache site; } proxy_cache_key "$scheme://$host$request_uri"; proxy_pass http://real-site.tld; However, nginx gives an error, stating proxy_cache can't be used in an if-structure. Any other way to serve from a different cache depending on the browser? Thanks, Tuinslak

  Read the article

• COUNTIFS over multiple worksheets

  - by Alison

  I am trying to make COUNTIFS go across two worksheets in the same excel file (Final Driver Forecast Model), just on different tabs. I need it to count if a driver returns between a certain time, then to put a 1 in that time slot. For example if a driver returns at 2:30 p.m. on the 27th, then the formula will put in a 1 in the July 27th slot from 2:00 p.m.-4:00 p.m. I have tried two different formulas the first is =COUNTIF3D(Bid Sheet '[1]Bid Sheet 1'!O4:O110,">="&B76,O4:O110,"<="&C76) This is looking at the worksheet called Bid Sheet 1 and the column O4 through O110 and deciding if the time fits in the time slot of B76 00:00 (12 a.m.) and C 76 2:00 a.m. The second formula I tried to do the exact same thing =COUNTIF3D(O4:O110,">="B76,O4:O110,"<="&C76,"FinalDriverForecastModel',Bid Sheet 1") Neither is working and they both give me #NAME? when I hit enter......What am I doing wrong?

  Read the article

• Alien: .rpm -> .deb | Compability / Built per system?

  - by MaddinXx

  At the moment I'm playing a bit with alien (for OpenVZ packages on Debian) and was wondering myself about one question for which I was not able to find an answer anywhere. Therefor I thought it might be smart to ask here :) The question is... If I convert a .rpm to .deb on a system, how compatible is this .deb package? What do I mean? Will the .deb be working on other systems as well or is it per-system, e.g. that on every system the .deb package will be little different? That i386 and x86_64 are different is clear, so this doesn't need to be answered :) Examples that would be nice to know are for example: .deb built on Debian 6 64-bit - Ubuntu 12.04 64-bit (compatible?) .deb built on Debian 6 64-bit - Debian 5 64-bit (compatible?) etc. Thanks anyone reading this / helping me! Regards, Michel

  Read the article

• More than one XP Mode virtual machines okay under Win 7?

  - by kousen

  I really like the Windows XP Mode virtual machine that comes with Windows 7 (once you download the integration components). I teach technical training classes, and having a machine configured for the classroom is very helpful. My question is, can I configure more than one? The documentation suggests you can make multiple virtual machines, but I can't tell if I can have multiple "Windows XP Mode" VMs. It can't be as simple as configuring one, then just making a copy of the primary disk file, could it? I only plan to run one at a time, but I'd like to configure multiple different VMs for different classes, all running XP if possible. Thanks for any help!

  Read the article

• How can I add metadata to NTFS files/folders?

  - by Pwdr

  I want to tag different file types (i.e. .pdf, .epub, .iso, .bin, folders,..) using the same descriptive fields. For example i would like a metadata field "type" which would be "eBook" on pdf- and epub-files, "CD-Image" on iso- and bin-files. I read about Alternate Data Streams (ADS) to make this possible. Does anyone know a good program for Windows 7 to tag different files and search for them? It is important for me, that the metadata is NOT stored in a separate database. I move the files a lot and need to stay flexible (ADSs 'stick' to the files). Any ideas?

  Read the article

• How to specify multiple HostName/Port combinations in .ssh/config

  - by leoluk

  I have multiple notebooks and workstations which pull and push from multiple Mercurial repositories on a central server. I usually use .ssh/config to set an alias: Host repo-server HostName server.somedomain User user143 IdentityOnly yes IdentityFile ~/hgkey Port 156 ... and some more options, you get the idea. I can then simply do a hg push ssh://repo-server//hgroot/someproject on every local repository, and I can change the server address and port in one place. For workstations, this works fine, but the notebooks can access the server either from inside the network or from outside, using a different address and a different port. Is there any way I can specify multiple HostName/Port combinations so that SSH automatically tries them in order? This way, the users could push and pull without having to care about the correct address. (of course, using a VPN would be the most correct solution)

  Read the article

• Is it possible to dump the names of all the open files in notepad++ to a file?

  - by mark

  So, I dragged and dropped multiple files onto notepad++. The files came from different directories and were selected using different criteria. So, I have many files open in Notepad++. Now I need to have a list of all the open files in another file. Right now, my only option is to script the decisions used to guide me in selecting the files in the first place. Which is probably the best in the long term, but I wonder if there is a quicky one in Notepad++. Some plugin magic or whatever. Suggesting another free editor which has this function is a good option too (not that I am going to ditch notepad++, God forbid)

  Read the article

• How to rename multiple files in multiple folders with 1 command

  - by Charles

  We want to rename our *.html files to *.php but (sadly enough) have not enough knowledge to do it with a dos batchfile and/or cmd prompt command. The problem is that each file is in seperat folder and yes talking about 1500+ different folder names. Using wildcards for the files I know is the '*' but using also a wildcard for folders is unknown to me. We probably need to use the (MSDOS) 'FOR' command but there I am stucked. Folder structure we use is: parent-folder/child-folder/grandchild-folder/file.html sample: games/A/game_name/file.html, games/B/game_name/file.html, games/C/game_name/file.html and so on. The parent folder is for all files the same, the child & grandchild folders are different for most files. After renaming these files to .php I assume following in the .htaccess will make a permanent redirect. RedirectMatch 301 (.).html$ http://oursite.com$1.php Looking forward to suggestions/answers, thnx in advance.

  Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >