Search Results

Search found 14816 results on 593 pages for 'logical model'.

Page 294/593 | < Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >

• I have 2 identical windows 2008 r2 servers with 32G RAM, one shows "Installed Memory(Ram): 32.0GB" a

  - by c0m4

  the server model: HP Poliant DL160 G5, both servers have identical product ID. for some reason one of the servers have 4GB ram reserved. it shows in the memory tab on the Resource monitor as "Hardware Reserved". I've googled it a bit and found some post related to msconfig boot parameters (but mine are properly set) and some post related to memory remap option in the bios but it is not available in my servers bios so in a bit lost... help?

  Read the article

• What desktop boards support VT-D or IOMMU?

  - by Jeff Shattock

  I'm looking for a desktop board that supports either VT-D (Intel) or IOMMU (AMD) technology. This is the IO virtualization technology, not VT-x for CPU virtualization. I've found a list of chipsets that are purported to have this, but every board I look at, the vendor has decided to not support that feature. I would really prefer a desktop board over a server board for this. Does anyone have a specific model that is known to support this technology?

  Read the article

• I am building a computer, will these components work? [closed]

  - by david

  Case: Coolermaster HAF 912 Graphic card: Sapphire RADEON HD 6850 Optical Drive: SONY SATA DVD-ROM PSU: Corsair CX500 RAM: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBXL Motherboard: MSI Z77A-G43 Processor: Intel core i3 2120 Still don't know which harddrive to use, neither if i should buy a cpu cooler fan... so if you can help me, please

  Read the article

• Why does HDTune report better performing drives 2 months after installing them?

  - by Rolnik

  OK, so this is really weird. I ran HDTune on a newly set-up home-built computer and got the following readings from my drives in mid-November. SSD 154 MB/s RAID1 87 RAID0 198 (software installs) RAID0 98 Swap drive Today, in January, I run HDTune (same version) and get these results, in MB/s: SSD 186 RAID1 98 RAID0 241 RAID0 98 (Swap drive) Here are more details that HDTune reports on the SSD drive: HD Tune: OCZ-VERTEX Benchmark Blockquote Transfer Rate Minimum : 135.4 MB/sec Transfer Rate Maximum : 219.4 MB/sec Transfer Rate Average : 185.7 MB/sec Access Time : 0.1 ms Burst Rate : 187.3 MB/sec CPU Usage : -1.0% To get to my question: Why are my hard drives improving in performance? Most of my logical drives are in some form of RAID, except for the SSD. Will this performance ever deteriorate? Note, none of my drives are a hybrid drive that uses some form of SSD to enhance the write/reads on actual platters.

  Read the article

• Some Memory Slots Not Working on MSI FM2-A85XA-G65 Motherboard

  - by Mike Ciaraldi

  Short version of question: Does anyone have an MSI FM2-A85XA-G65 motherboard, who can confirm that all four memory slots work? Long version: Several months ago I bought an MSI FM2-A85XA-G65 motherboard at Newegg. At that point I installed an AMD A8-5500 processor and two sticks of Corsair Vengeance 8 GB DDR3-1866 memory, and put it into my file server. I installed the RAM in slots 1 and 3, as directed in the manual, to enable dual-channel memory access. It seemed to work fine, so I bought a second identical mobo (which arrived dead, but was quickly replaced by Newegg) and set of RAM, installed an A10-5800K, and put that into my production Linux machine. Again, it seemed to work well. Eventually I happened to notice that on the server only 8 GB of RAM appeared in the BIOS. I tried each of the slots and memory modules individually and in various combinations. I even swapped processors with the production machine. The result was that putting memory in slots 1 and 2 worked (showing a total of 16 GB), but any memory in slots 3 or 4 was not recognized. However, all four memory slots in the production machine worked, and I confirmed this with both processors. I contacted MSI and arranged to ship the defective mobo back to them for replacement under warranty. I did not want my file server to be down in the interim, and I had another machine I wanted to upgrade, so I bought a third identical mobo to use. That one had the same problem -- only memory slots 1 and 2 worked. I tested it thoroughly with multiple processors and memory sticks. I sent the defective mobo back to MSI and they sent me a new one. This has the same memory slot problem. So I sent it back. The replacement arrived the other day and shows the same problem. I contacted MSI yet again and they said that nobody else has reported memory slot problems on this board and it must be my processor. So my score so far is, out of six boards of this model, I have: One where all four slots work. One which was dead on arrival. Four where only memory slots 1 and 2 work. Before I tear my other machines apart and start swapping processors again I thought I would ask if anyone else has this exact model motherboard and could confirm that all four memory slots either do or do not work. According to MSI you should be able to just plug a single memory module into any of the slots and it will work (and it does on the one mobo I have which works correctly). If you have not yet used all four slots, this is a good time to test them so you know if you can expand your memory in the future. Thanks in advance to anyone who can help.

  Read the article

• How do you expand a raid disk array in a dell 2850?

  - by johnny

  Hi, I have a Dell 2850 and I want to install Windows 2008 Server. Problem is that my C drive only has 16GB of space. The requirements say I need at least 20. I have an open bay for a drive. If I put in another drive, how can I add that to the array and them make it only for the C drive? what do I do? Thank you. edit: I don't want to remove any drives. I just want to add a new one to the existing array. Can I do that and make sure that new drive is for the logical C drive?

  Read the article

• vista issue with shift key

  - by Mr New

  for some reason when i press the shift key on my laptop keyboard is mapped to 'ctrl+v' which does a paste. i thought it was the keyboard but then i replaced it with a wireless one,it still gives me the same issue. can someone help me. i cant just turn off the shift key all together because i do need it at times. model 8510w; vista operating system

  Read the article

• centos freezes with this error kernel: ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x0

  - by lakshman

  0 down vote favorite share [fb] share [tw] I am using centOs 5.5 version with raid 1 configuration the server freezes and goes to non response . the only thing i found on messages file is kernel: ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x0 The server is built recently Please let us know what is the problem the hard disk details are Model Number: ST500NM0011 Serial Number: Z1M02LT7 Firmware Revision: SN02

  Read the article

• How can I make photo CDs from iPhoto

  - by Jody M

  I have a new Macbook, don't know the OS, but just got it--it's the cheaper model. I saved a lot of photos on iPhoto and can't figure out how to burn a CD. Tried the "share" function and when I choose a location to save the photos and hit burn, get an error message that says can't create in that location. Needs to be run on a pc or photo processing place.

  Read the article

• Can I back-up to partition to restore my computer to factory settings?

  - by leaf68

  I have a VAIO model VPC-F11JFX/B. I want to restore it to factory settings (instead of formatting it so I can keep the programs it comes with like VAIO Care). I have like 20 GB of data so I can't copy it into my flash drive and it would take up like 7 of my CD's so I can't do that either. So can I make a new partition (called D) and move the files to D from C. Because I don't know if restoring to factory settings is going to wipe the entire drive or just the partition.

  Read the article

• Is Lenovo T410 capable of supporting two external monitors at 1080x1920?

  - by Bo Tian

  I'm interested in the model with nVidia NVS3100M graphics, and I'd like to connect to two external monitors, one via VGA and another via DisplayPort. Will it be able to support 1080x1920 (both rotated 90 degrees) on both monitors? Also, if I decide to add a third monitor, will it be able to support three through a dock? Thanks.

  Read the article

• win 2008 core create a partition with an offset to allow other partition expand

  - by Rqomey

  We are running a win 2008 core host in a HyperV role. We have expanded the logical drive on a RAID 1+0 array belonging to the server, as we needed more space. We have two data partitions D: and E: I want to expand them both so they use all space, and are equally sized. There is data on all partitions, although E is not in live use (so files can be moved and copied from it. Current: What I want- temporary Partition (F:) at end of drive: I am going to create a temporary partition F: so I can move the files from E: onto it, then delete E:, expand D: to the desired size, then rename F: to E: To do this I need to create F: from the end of the drive, ie. have unused space between E: and F: tl;dr How do I create a partition with a large offset in Windows server?

  Read the article

• How to benchmark kernel (-Os vs -O2)

  - by NightwishFan

  It seems logical to me that on a 64-bit kernel compiling it to optimize for size might help overall. (My distro of choice uses -O2) It has the benefits of more registers and memory and perhaps less cache contention than normal optimized code. I have a kernel compiled like this and it seems excellent. However my question is how can I prove this? I like using Phoronix for "real world" sort of benchmarks so I would prefer to test cases like that. What should I pick to test? Does anyone else have any alternatives? Thank you very much in advance.

  Read the article

• ext4 loopback device, Buffer I/O Error on reboot

  - by cvb

  I am trying to mount a loopback device on my ext4 formatted ssd drive. I get these errors when I reboot on Linux kernel 2.6.38.8 Buffer I/O error on device loop1, logical block 0 Here is what I do: dd if=/dev/zero of=/mnt/s/lodev bs=4096 count=250000 mkfs.ext4 /mnt/s/lodev mount -n -o loop,rw /mnt/s/lodev /mnt/test The loopback mount is successful, but on reboot I get errors as mentioned above. Even mouting with 'sync','data=writeback' does not help. I tried to losetup a device, but see the same behavior. I also reformatted the base device and created the loopback device and mounted as above, I still see these errors. I do not see them when I format them as vfat. Appreciate any suggestions on this problem.

  Read the article

• How can I know if a VM is used or not?

  - by Saariko

  I am running eSXI 4.1. In my main datastore I have plenty of folders, some of them has logical names, while the others don't, they hold BASE configurations/images of clients that I duplicate and activate. I only have a fraction of the actual clients loaded and running on the server. How can I know, but looking in the datastore folder, if the VM is in the inventory or not? If I right click on the vmx file, I can add it to the inventory - EVEN if the same client/folder is already active.

  Read the article

• What's the most durable netbook

  - by Keyslinger

  I'm about to spend more than two years in Latin America and I know from experience that not all computer equipment can handle the shifts temperature, air moisture, and other atmospheric variables as well as the generally greater number of shocks and jostles presented by developing-world transportation and unstable infrastructure/power grid. Is there any particular manufacturer, brand, or model of netbook or notebook that stands above the rest in terms of durability and ability to survive in harsh environments?

  Read the article

• My computer won't go into standby or hibernate

  - by Thomas B.

  Hi. I have a problem that I first noticed yesterday. Whenever I would press the half moon standby button on my keyboard, my computer would go to sleep. I also have a shortcut on my desktop configured to put my computer into hibernate. But now whenever I try to put my pc in sleep or hibernate mode, my monitor goes black for a few seconds but then comes back on at the login screen. I haven't installed or changed anything other than create a couple logical partitions in the hfs+ filesystem. (still in the process of trying to triple-boot) Any help would be great, but for now I'm going to bed. Will check back in the morning.

  Read the article

• Refurbished vs. Used monitors

  - by Timur Sadykov

  I am looking for additional monitor, I'm trying to save some money by looking on used and refurbished ones. Used monitors are usually noticeably cheaper, but it is quite difficult to find something close to the desired model. Their condition also vary significantly. Refurbished ones eliminate these problems for some additional money. Is there anything to look out for with refurbished monitors? Do many of the have lots of broken pixels etc?

  Read the article

• How to install Windows 8 boot manager in a different partition?

  - by arnab321

  the last time i installed Windows 7, the boot manager automatically got installed in a small hidden partition, and the main os into another partition. So, formatting the c: won't affect the boot manager. yesterday i wiped and repartitioned my hdd like this: 50mb primary ntfs (meant for boot manager) 100gb primary ntfs (for win 8) 50gb primary ntfs (for win 7) some logical partitions to install ubuntu and other os i installed win 7 and then win 8, and now there is no os choosing menu. system directly boots win 8 and the 50 mb partition is empty. There is a way to boot Windows 7 and even Ubuntu directly from the Windows boot manager with EasyBCD. But How do i put the boot manager in the 50mb partition ?

  Read the article

• question about a sata read/write speed

  - by Joe

  I'm contemplating biting the bullet for an ssd drive in a server, obviously I know it will be MUCH faster than a regular 7200rpm sata2 3gbps drive. The nice thing about ssd's is often they post the read/write speed but that info isn't available for sata's so I'm just curious to know what a typical read/write speed would be for a seagate 120gb 7200rpm drive. I know it fluctuates from manufacturer and model series but I'm just looking for a guestimate.

  Read the article

• HP Proliant G7 hardware RAID configuration automation with ribcl

  - by karthik

  I have been trying to automate hardware RAID configuration of HP proliant machines before OS installation (So I can not use hpacucli) ssh into iLO3 doesn't have option for RAID configuration I use ribcl but there is no command for RAID config, however I see this under the command GET_EMBEDDED_HEALTH. <STORAGE> <CONTROLLER> <LABEL VALUE="Controller on System Board"/> <STATUS VALUE="OK"/> <CONTROLLER_STATUS VALUE="OK"/> <SERIAL_NUMBER VALUE="50014380215F0070"/> <MODEL VALUE="HP Smart Array P420i Controller"/> <FW_VERSION VALUE="3.41"/> <DRIVE_ENCLOSURE> <LABEL VALUE="Port 1I Box 1"/> <STATUS VALUE="OK"/> <DRIVE_BAY VALUE="04"/> </DRIVE_ENCLOSURE> <DRIVE_ENCLOSURE> <LABEL VALUE="Port 2I Box 0"/> <STATUS VALUE="OK"/> <DRIVE_BAY VALUE="01"/> </DRIVE_ENCLOSURE> <LOGICAL_DRIVE> <LABEL VALUE="01"/> <STATUS VALUE="OK"/> <CAPACITY VALUE="68 GB"/> <FAULT_TOLERANCE VALUE="RAID 0"/> <PHYSICAL_DRIVE> <LABEL VALUE="Port 1I Box 1 Bay 3"/> <STATUS VALUE="OK"/> <SERIAL_NUMBER VALUE="6TA0N3SZ0000B231CYDT"/> <MODEL VALUE="EH0072FAWJA"/> <CAPACITY VALUE="68 GB"/> <LOCATION VALUE="Port 1I Box 1 Bay 3"/> <FW_VERSION VALUE="HPDH"/> <DRIVE_CONFIGURATION VALUE="Configured"/> </PHYSICAL_DRIVE> </LOGICAL_DRIVE> </CONTROLLER> </STORAGE> My question is, is there a way I modify/create this xml piece (say I have 2 Logical drive with one spare) and reboot the server it takes effect ? If this approach is not correct are there any other ways to automate hardware raid config ?

  Read the article

• Wired USB mouse left button stops working

  - by InNeedOfHelp

  My wired USB mouse's left button stops working properly after being plugged into the computer for about five minutes. The mouse button will become sticky and not allow me to select things or the left button is completely unresponsive. The mouse driver is up to date. I am running Windows Vista Home Premium with the Service Pack 2 on a Sony Viao laptop (Model number (VGN-NW125J). If anybody knows how to fix this your help would be greatly appreciated.

  Read the article

• Wireless internet became extremely slow on my 27" IMac

  - by Tam

  The wireless internet on my Mac became extremely slow recently on my 27" IMac. I don't recall doing anything different other than doing the Apple Software updates which I let it pop up and install automatically. On my Mac Book internet is still fine so I don't think it's the model or the router. I'm not sure where to start digging the cause of this or how to solve it. Looking into the System Preferences on my IMac, it's pretty identical to my MacBook!

  Read the article

• How can I mount an image from an external HDD to a partition within the host system?

  - by HardwareMuch

  I'm currently using Acronis True Image Home 2010 and I have created an image of my Windows 7 OS. I copied it to my external HDD and I repartitioned my other PC's HDD. The primary partition houses the Windows Xp system which also has Acronis installed. The new partition is logical. Whenever I try to go through the steps on "Clone Disk" the program would not let me select a destination drive if I choose the external HDD as the source. I also did not know that it you can only select disks instead of partitions as a source or destination. Any suggestions would be greatly appreciated. Thanks.

  Read the article

• Is email forwarding to the sender's address usually blocked in Mail servers / MTA?

  - by codecowboy

  I've noticed that email forwarding to an address seems not to work if I send an email from the address to which I am forwarding email. This happens for GMail and Fasthosts mail servers. e.g I send an email to [email protected] from [email protected] , [email protected] is set to forward to [email protected] and the email never arrives. I realise this seems logical but it is a potential cause of confusion when testing email functionality in a web application (for me, anyway ;-). I would just like to know if this is standard for all MTA software so I can avoid confusing myself.

  Read the article

< Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >