Search Results

Search found 9083 results on 364 pages for 'startup scripts'.

Page 294/364 | < Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >

• How to backup Servers to an SSH-Host with low traffic and access to versions and encryption?

  - by leto

  Hello, I've not run backups for the past dont't remember anymore years for my personal stuff until waking up lately and realising contrary to my prior belief: Actually. I care! :) Now I have a central data server at home where I want to attach an external media to, to which I want to save backups of my most important stuff, like years of self-written scripts, database dumps, you name it. I've tinkered with rsync+ssh over the last two years, also tried tar over ssh, but don't know the simplest and most easy to maintain way to do it yet. Heres my workload: A typical LAMP-Server (<5GB Data) which I'd like to backup fully so lots of small files connected via 10Mbit My personal stuff (<750GB Data) from a Mac connected via GE My passwords in an encrypted container (100Mb) from OpenBSD connected via serial-PPP My E-Mail from the last ten years (<25GB) as Maildir which I need to keep in readable format Some archives (tar.*) which I need to backup only once and keep in readable format (Deleted my ideas, as I'm here for suggestions) What I need: 1. Use an ssh-tunnel for data transfer 2. Be quick with lots of small files 3. Keep revisions 4. Be sure the data I save is not corrupted 5. Intelligent resume functions and be able to deal with network congestion :) 6. Compressed and optionally encrypted storage 7. Be able to extract data from backup easily (filesystem like usage would be nice) How would and with what software would you backup this stuff? Hints to tools that can help solve only part of my problem (like encryption) also greatly appreciated. Greets

  Read the article

• Long running php script hangs/terminates on IIS 7.5

  - by Rich

  I'm a bit of nube when it comes to configuring IIS 7.5 and Php so apologies if this is a silly question but I've been wrestling with this for over half the day and need some fresh input. I have a php application running on IIS 7.5 , php 5.4 running as fastcgi. The application works absolutley fine with the exception that long running php scripts seem to hang; no 500 error they simply seem never complete and return the results to the browser. I've written a simple test script below to eliminate the possibility of programming error in the main app : <?php /* test timeout */ /*set_time_limit(110);*/ echo "Testing time out in seconds\n"; for ($i = 0; $i < 175; $i++) { echo $i." -- "; if(sleep(1)!=0) { echo "sleep failed script terminating"; break; } } ?> If I run the script beyond 175 seconds it hangs. Below that it will return the results to the browser. Here are the time out parameters that I've set for php and fastcgi. I've also played around setting these really low in order to get various time out errors and have succeeded which brings me to the conclusion that there's another setting that I'm missing .. perhaps. fastcgi activity timeout=800 Idle Timeout = 900 request Timeout 800 Php max_execution_time=700 Any solutions or pointers in the right direction would be very ... very welcome. Thanks

  Read the article

• Transfer iptables rules to another server (almost) real time

  - by MrShunz

  I'm running 2 cPanel servers with ConfigServer Security & Firewall plugin. One of the functions of the plugin is to block via iptables (temporarily and/or permanently) IPs which fail various authentications (POP3/IMAP, SMTP, FTP, webmail, mod_security and such). Now, i'd like to push those IP blocks to the border router to drop packets as soon as possible (and doing so protecting the other machines on the network). Keep in mind that after N failed logins IP is blocked for 5 minutes, then re-allowed. If multiple bans occours in an hour IP is blocked permanently and should be unlocked "by hand". So I need a near realtime solution. What I'm looking for is a better way than firing some cronjobs both on cPanels and border router to: dump the rules to file transfer the file to border router (via scp/sftp) load the rules from the file in the border router I'm aware that I will need some scripts to parse and modify the rules as cPanels have one ethernet interface and some aliases while border router has two ehternet interfaces and some loopbacks. All machines involved use Linux. EDIT as per @pjmorse comment. The plugin consists of a bunch of perl and config files. The part I'm intrested in is a process which scans logfiles (lfd) and installs iptables rules (and sends an alert email). Fact is, it upgrades quite often (one or two times a week) and itself is 7000 lines of perl so I'm not comfortable on tampering with it.

  Read the article

• Explain why .bash_logout won't run commands?

  - by Droogans

  So I've been wondering how to run these two lines of code everytime I close an open instance of Terminal: history -c cat /dev/null > ~/.bash_history I export HISTFILE=5 on startup, but still want to flush that out when I'm done. I've tried looking around a bit in a couple of places, and haven't had much luck. I run Linux Mint, and would also note here that I ran into a similar issue with .bash_profile; eventually, I discovered I needed to place all start up code in .bashrc, so maybe that has something to do with it. Here's my .bash_logout file: #!/bin/bash # ~/.bash_logout: executed by bash(1) when login shell exits. # when leaving the console clear the screen to increase privacy if [ "$SHLVL" = 1 ]; then history -c cat /dev/null > ~/.bash_history [ -x /usr/bin/clear_console ] && /usr/bin/clear_console -q fi #this does nothing on exit... echo 'logout'; sleep 2s I've tried re-arranging this script many ways, I'm not sure if I don't understand how bash works, and if any of this is running in the first place. Does the fact that I run Xserver make bash consider Terminal something that isn't a log-out on exit?

  Read the article

• Lost user account for Windows Vista

  - by annelie

  Hello, I'm trying to help a friend who's lost her user account in Vista. I know there's supposed to be a way you can boot the computer from the vista installation disc and create an admin account you can later login with, but her installation disc is in Australia and her laptop in London. Is there any other way to get in? Or would it be better to try and access just the harddrive? She's mainly concerned with getting all her data off it. As for how she lost the account, I'll let her explain in her words. :) My computer basically got some virus and now is up sh*t creek. it told me i had this cryptic thingy majiggy was missing and then this fake virus told me i needed to scan my computer. SO i tried to do malware thing but it kept shutting my computer down. ANYWAY...now its it will only open up with 'launch startup repair' and has got rid of my settings for logging in and wants me to be 'other user' which i have no password or username for'...so basically im stuffed. This is Windows Vista by the way. Thanks, Annelie

  Read the article

• Urgent: how to deny read access to a ExecCGI directory

  - by Malvolio

  First, I can't believe that that isn't the default behavior. Second, yikes! I don't know how long my code's been hanging out there, with all sort of cool secret stuff, just waiting for some hacker who knows Apache better than I do. EDIT (and apology) Well, this is sort of embarrassing. Here's what happened: We had some Python scripts available to the web, at /aux/file.py, which were not surprisingly at /var/www/http/aux . Separately, we were running an app server and Apache proxies through at /servlets/. A contractor had constructed the WAR file by bundling up all the generated files including the Python files (which are in a directory also called aux, not surprisingly), so if you typed in /servlets/aux/file.py, the web-server would ask the app-server for it and the app-server would just supply the file. It was the latter URL that this morning I happened to type in by accident and lo, the source appeared. Until I realized the shear unlikelihood of what I had done, the situation was rating about 8.3 on the sphincter scale. After a tense half-hour or so I realized that it had nothing to do with the CGI (and that serving files that were also executable would be not only foolish but also impossible), and was able to address the real problems. So -- sorry, everybody. Let the scorn-fest commence.

  Read the article

• Audit file removal (auditctl)

  - by user1513039

  For some reason, some script or program is removing a pid file for the service on the linux server (centos5.4 / 2.6.18-308.4.1.el5xen). I suspect a faulty cron script, but manual investigation did not lead me to it. And i still want to track it down. Have been using auditctl rule: auditctl -w /var/run/some_service.pid -p w Which helped me to see something, but not quite exactly what i wanted: type=PATH msg=audit(11/12/2013 09:07:43.199:432577) : item=1 name=/var/run/some_service.pid inode=12419227 dev=fd:00 mode=file,644 ouid=root ogid=root rdev=00:00 type=SYSCALL msg=audit(11/12/2013 09:07:43.199:432577) : arch=x86_64 syscall=unlink success=yes exit=0 a0=7fff7dd46dd0 a1=1 a2=2 a3=127feb90 items=2 ppid=3454 pid=6227 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=pts0 ses=38138 comm=rm exe=/bin/rm key=(null) Problem here is that i see ppid of the script that removed the file, but at the analysis time the (p)pids are already invalid as probably scripts/programs have been shutdown. Imagine a cron script deleting the file. So i need some way to expand/add audit rule(s) to be able to trace the parents of the /bin/rm at the time of removal. I have been thinking to add some rule to monitor all process creation, something like: auditctl -a task,always But this happen to be very resource intensive. So i need help or advice how to combine these rules, or how to expand any of the rules to help track the script/program. Thanks.

  Read the article

• Plesk command working in manual script, not in cronjob

  - by dsaunier

  Hi, In order to install a hosting plan, I use Plesk's commands in SSH as specified in their official guide. When typed directly in SSH (Putty), it works perfectly. The line is as follows with obviously values hard coded when in CLI: /usr/local/psa/bin/domain --create '.$url.' -owner mynamehere -ip '.IP_SERVER_PLESK.' -status enabled -hosting true -hst_type phys -login '.$ftp_user.' -passwd '.$ftp_pw.' -www false -php true -php_safe_mode false -hard_quota 100M I then put that request in a php script that does other things after hosting is installed. Now for the weird part: when calling that script from CLI it also works fine, I do a ./myscript.php and it installs the hosting, then sends emails etc. However after I create a cronjob to have that same script called regularly, then the Plesk command fails. The cronjob is started in Plesk as */15 * * * * /usr/bin/php /home/scripts/myscript.php and it works fine for everything BUT the Plesk hosting install, that returns "Unable to read Control Panel configuration file" and therefore does not install the domain hosting. Still this is the same script that I call manually ! On that server are the PHP used to call a cronjob and the one used in CLI different ? What do I miss, help greatly appreciated ! Regards.

  Read the article

• Why is "start in" needed for Windows scheduled tasks?

  - by GomoX

  We develop a web application that can be deployed on Windows or Linux. The Linux implementation uses cron, and the Windows one uses scheduled tasks to run a single PHP script that processes all scheduled tasks for our system. The task is scheduled using schtasks during the install process, like: This has always worked both under W2003 and W2008. A week ago a customer reported that scheduled tasks were not running. He is running on Windows 2008. We checked over and over and finally solved the issue by entering the folder that contains the .vbs script as the "start in" folder for the scheduled task. This said, there is no way to set up the "start in..." value from schtasks without using an XML definition of the tasks. XML definitions don't work in Windows 2003, so I would have to add windows version detection to the installer, additional testing, etc (I'd like to avoid this if at all possible). The only atypical thing I noticed about the install is that the system is installed in D:\ as opposed to the default C:\Program Files (x86)\, but I don't see how this would matter. All the paths are absolute in all the scripts. Can anyone suggest a reasonable solution for this?

  Read the article

• Removed Old Domain Trust. Now Progress (9.1D) can't open DB File

  - by RLH

  My company has an old server, running Progress 9.1D on a Windows 2000 VM, which was used by our company OS (Vantage 6 by Epicor.) Vantage was our primary OS for a very long time. About 2 years ago, we migrated to a larger, corporate OS and we cancelled our service contract with Epicor. Yesterday, we removed an AD trust between the corporate domain and our old AD domain we used in the days of Vantage. After restarting the virtual server, I have been able to start the ProService for 9.1D Windows service, however, I can not get Vantage to start back up. When I run the application, I get the error in the message listed below. Transcript: ** Could not connect to server for database [progress db file], errno 0. (1432) How can I fix this? FYI, I haven't had to work with Progress in years and even then I wouldn't have considered myself a "novice"-- I'm even less knowledgeable than that title would suggest. Vantage had a lot of internal tools and I recall that Epicor support managed to prevent .pf scripts from being executed. If there was a Progress specific patch that needed to be applied, you had to do it within the Vantage software OR they had to remote into the machine to fix this. I may not be able to run a .pf script but I do know that I can log into the console-based server application. (Yes, I can't even recall which utility that was called. It is sad.) It's been a long time and I never had to digg into Progress that much. Please help and feel free to ask questions. If you need more info, I'll update this post.

  Read the article

• Windows 7, Black screen with cursor, impossible to logon

  - by PJC

  First - I have gone through as many possible solutions I've found here and elsewhere. [Edit - to describe the issue in more detail, the PC appears to boot correctly, but instead of the logon screen, I have been getting a black screen WITH the pointer cursor, and it responds correctly to the mouse. Pressing CTL-ALT-DEL brings up the logon screen's background, but with no logon area nor any other content. This screen was at the full resolution before I uninstalled the graphics driver in safe-mode.] I also just ran a full up-to-date AVG scan from boot media. [Edit - the AVG scan, which was updated to today's virus signatures, found no issues at all.] So - steps I've tried: Safe Boot, Restore from before the issue - done, no help. Uninstall the graphics driver - done, now i have a 1024x768 fallback screen, still no way in. sfc /scannow - only doable from Safe boot obviously, but no change. [Edit - booting from restore media, performing a startup repair and...]Restore further back - restored to 2 days ago, and I'd had many reboots since then with no problem. Enable autologin to try to get beyond the login screen - done, doesn't work. It seems the best advice is complete reinstall, but I really don't want to do that because it'll take 3-4 days to add all the apps I use. Some key points to note - in both states - before and after removing the video driver, I always had a mouse cursor on the screen. CTL-ALT-DEL flashes up the login background, but no login info. I can (and often do) reinstall from scratch, but was at a fairly stable state before this, and would prefer not to. -Paul

  Read the article

• What could cause a dual-monitor PC to suddenly stop using one of the screens?

  - by raldi

  I've got a dual-monitor setup using a GeForce 7900GT that was working fine for over a year... then suddenly, only one of the screens works. It's not OS-related, because even on startup, only one screen displays the BIOS checks. In the past, both screens would show it together. I didn't change anything to trigger this The monitor that gets a signal is random -- sometimes the one on the left goes black, sometimes the one on the right. The monitors and their cables are good -- I can switch both or either, and I get a signal just fine. They're plugged in, too. It's not the video card, either -- I have an identical 7900GT in another machine, and swapping the two didn't fix anything. It's not dust on the motherboard -- I pulled everything out, cleaned it off, checked for obvious damage, put it all back together, and no change. My next two steps are going to be to reset the CMOS info and to try swapping out the motherboard. Before I do that, does anyone have any other ideas?

  Read the article

• My server cant resolve domains?

  - by Nuker

  I am on a VPS that is pretty much unmanaged so it means im on my own. I did my best to configure it so i can host my own site for other people to see it online but seems like i have network problems because in the last days many of my users report they cant enter my site from my domain and seems like Google and Facebook cant either (this never happened before). Its weird because i can enter my site without problems and so many other people as well. But then i tried to make a php include and i get this error: Warning: include(): php_network_getaddresses: getaddrinfo failed: Name or service not known in I was told that seems like my server cant resolve domains. The includes work if i use IPs instead of domains. So it means i have a DNS problem or something? What can i do to fix it? Im on a Linux 2.6.32-431.11.2.el6.x86_64 on x86_64 CentOS Linux 6.5 Thank you. EDIT: i have this on my resolv.conf # Generated by NetworkManager # No nameservers found; try putting DNS servers into your # ifcfg files in /etc/sysconfig/network-scripts like so: # # DNS1=xxx.xxx.xxx.xxx # DNS2=xxx.xxx.xxx.xxx # DOMAIN=lab.foo.com bar.foo.com nameserver 8.8.8.8 nameserver 8.8.4.4

  Read the article

• VMware ESX Linux Guest Customization

  - by andyh_ky

  Hello, I am interested in deploying several RHEL 4 Update 8 virtual machines for creation of a test environment. Here are the steps I am taking: In off hours, P2V/V2V the production machines and convert them to templates Deploy the virtual machines with a customization specification that changes hostname, IP address I am interested in how these processes are done and if there are any options for further customization. Are the machines brought on the network when they are powered on, before they are reconfigured? Is there a potential IP address conflict? Is there an option to run additional scripts which reside on the guest as a part of the reconfiguration? For example, restoring an Oracle Database. This is an option with Windows guests and sysprep, but I have been unable to locate anything showing a RHEL equivalent. I am dealing with a multi tier application. The main issue I am attempting to mitigate is that the application servers reference database servers by hostname and in tnsnames files. I am interested in scripting the reconfiguration of the application in the deployment so that the app/db servers are pointing to the test environment. I am OK with placing the 'cleanup' script on the source and executing it after the machine has been brought up. I am interested in the automation of the script's execution post clone/boot, as well as if there could be an IP address conflict. (cross posted to VMTN's ESX 4 community)

  Read the article

• can't change wallpaper real time regedit commands

  - by itagomo

  i'm a first time 'SuperUser' poster .. what i want is to programatically change Desktop Wallpaper every few hours .. i'm using a batch file (.bat) and don't want to use other languages or programs, just the pre-installed stuffs with Windows XP .. i've already made my script that will modify values in the Registry reg add "HKCU\Control Panel\Desktop" /v Wallpaper /d "C:\Pictures\picture1.jpg" but it's not taking effect real time even with this command: RUNDLL32.EXE USER32.DLL,UpdatePerUserSystemParameters ,1 ,True need to reboot first to take effect. if i'm going to use Display Properties, it'll show at once. what i've noticed is that changes will take effect real time if it's a .bmp file and not for .jpg images. Second option is to convert JPG to 24-bit BMP files (to look exactly the same, but will triple the file size), but i'm hoping a better way .. i've already googled things but no avail.. i hope you (the helpful reader) can post any .bat or even vbs script to change Desktop Wallpaper instantly with JPG pictures .. hoping there's an answer without installing other apps or scripts ..

  Read the article

• How to prevent response to who-has requests on virtual eth interface?

  - by user42881

  Hi, we use small embedded X86 linux servers equipped with a single physical ethernet port as a gateway for an IP video surveillance application. Each downstream IP cam is mapped to a separate virtual IP address like this: real eth0 IP address= 192.168.1.1, camera 1 (eth0:1) =192.168.1.61, camera 2 (eth0:2) =192.168.1.62, etc. etc. all on the same eth0 physical port. This approach works well, except that a specific third-party windows video recording application running on a separate PC on the same LAN, automatically pings the virtual IPs looking for unique who-has responses on system startup and, when it gets back the same eth0 MAC address for each virtual interface, freaks out and won't allow us to subsequently manually enter those addresses. The windows app doesn't mind, tho, if it receives no answer to the who-has ping. My question - how can we either (a) shut off the who-has responses just for the virtual eth0:x interfaces while keeping them for the primary physical eth0 port, or, in the alternative, spoof a valid but different MAC address for each virtual interface? Thanks!

  Read the article

• Multiboot USB (OSX only): How to customize partition name?

  - by wrk2bike

  Trying to deal with all the Mac OSX recovery disks I've got by moving them to bootable USB images. I've got a big USB drive with multiple partitions for each recovery disk, and it's easy to use Disk Utility to "restore" the recovery DVD to a partition. When I boot my target Mac while holding down the Alt key, I can see all my bootable images and they work great. Problem is, they've all got the same name: "Mac OS X Install DVD." I manage Macs of various vintages. If my target Mac needs 10.6.3 for example, my only option seems to be to try each one until I get past the "Mac OSX can't be installed on this computer" message. I originally named my partitions with the OSX revision number, but that name is replaced by the disk image name during Disk Utility restore. Is there any way to customize the name during or after Disk Utility restore? I tried making a new DVD image on disk first and renaming it, but when I restore it to my recovery partition it has the original name. EDIT: After booting to the wrong partition, and getting the "..can't be installed" message, I can open the Startup Disk menu and see the other partitions - and as I select each one, the info at the bottom indicates which OS revision is on that partition. So I know the info is in there! Just want it at the boot screen if possible.

  Read the article

• FTP Scripting Capabilities

  - by lmg

  I am looking for an FTP client that will allow me to do the following Include a GUI for setting up a number of FTP connections Support FTPS Run unattended on Windows Server 2008 Retry failed transactions Support email Support custom scripts I need to pull files from a few different servers and there are certain calculations that need to be done depending on which server the files come from. I've looked at SmartFTP and it looks like pretty much what I need except I can't get it to run as a Windows Scheduled Task (I currently have some support threads open in their forum). I've also looked at a few other FTP clients (Filezilla, RoboFTP, and AutoFTP (you can find the Windows 7 BSOD in this one!)) that haven't had the capabilities I'm looking for. Right now, I'm looking at WS_FTP and its scripting capabilities. It appears I can create a script to run as a scheduled task, but I can't add the script to a file transfer task. Does anyone have suggestions on how I can do post-transfer processing on the files or better yet how to integrate scripting into the file transfer task? I'm also open to other suggestions for FTP clients as well if you have them! If I can't find a suitable FTP client, custom scripting will just have to do the trick.

  Read the article

• Toshiba Satellite C665 Rebooting from Standby

  - by Coodu

  I currently am working on a C665 with a strange issue. When the panel is closed the notebook will put itself to sleep in the usual way, and the power LED changes to the pulse to indicate that the device is asleep. However, when the panel is opened to resume using the notebook, the system will restart itself, instead beginning from the Toshiba logo and proceed to boot back in to W7. I should also note that each time this occurs, the "Windows Startup Recovery" option occurs, indicating that the system was not shut down correctly. Some things I have tried: Updated to latest Toshiba BIOS. Returned BIOS settings to their defaults. Swapped Memory to known good module, tested KGM in both memory slots within system. Confirmed that power settings are set to sleep/wake when power button is pressed. Ran a quick HDD fitness test using a parted magic USB stick. Checked for BSOD logs using BlueScreenView, none found. Ran src, no violations found. Any ideas? I have a good feeling the system is restarting itself, but in the event viewer there is a "Kernel Power" error, but it simply says "The system was not shut down correctly." Perhaps a bad driver? I'm not sure. Any advice would be great.

  Read the article

• running a command line app with sudo and password automatically on start up OS X (Lion)

  - by Designer023

  I need to run an app at startup/login on my mac. I want it to launch in the background and start doing it's work without interrupting me or me having to start it up because I invariably forget and then when I need it, it wasn't running! I have tried using applescript to tell terminal to run it and type my password in, but it ends up opening multiple Terminal windows and not working. Ideally I need a script that I can just add to the user login items and it will run for me. The app has no way of taking a password argument either and it has a password as well as the sudo! I need a solution that can either be done as an applescript (which can be made into an executable) or i need a commandline script but I have no idea about them. This is the manual code I type >sudo serverStatus >password:123456 >password:serverpass Not sure if this is the right stack to ask, but I have no idea now and it's above my head! Thanks :D My applescript: tell application Terminal activate do shell script "sudo serverStatus" delay 5 do shell script "123456" delay 2 do shell script "serverpass" end tell

  Read the article

• .bat file - Nagios v3.2 service check and start if stopped

  - by LbakerIT

  I'm just barely getting into programming so I do apologize for my ignorance. I'm trying to create a .bat file that will check if a service is running on XP Pro. If service is running it will exit 0. If the service is stopped start service wait 10 seconds (via ping i'm guessing) check if service is running if service is running exit 0 if service is stopped start service wait 10 seconds Do this check a total of 3 times. if service does not come up within that time: exit 2 Exit 0 = ok exit 1 = warning exit 3 = critical (and this will alert) I need to do this for 3 different services but i'm expecting that it would be better to create one per service. That way you get notified on the specific service that is not coming back up. The goal is that if the service stops it will start it. If after 30 seconds it is unable to start the service then it will send an alert. The reason I'm trying to do it with a .bat is this is consistent with all other scripts and I did not want to complicate it further by adding different kinds of code. Yay for consistency! Again I do apologize for my ignorance I've been thrown into this project last minute. Thank you for the help and reading my question!

  Read the article

• Different font SIZES in a Text Editor, based on Script(Alphabet) type (ie. per Unicode Code-Block)

  - by fred.bear

  Some non-Latin-based scripts(alphabets) have more detail in their glyphs than do the Latin-based-script equivalents, and typically need a larger font to give the same degree of legibility (resolution-wise). Sometimes, both script types need to be present in the same file. Notepad++ allows different font SIZES (and colour, etc) courtesy of syntax-highlighting. This allows me to display larger-fonted non-Latin-based script in a // BIG-FONT comment. Although this has been quite handy for me in some situations, it is quite limited. A Word Processor can handle this scenario, but I'm not interested in that. I want a nice simple(?) plain(?) Text Editor to do it... on a per script-type basis... eg. mixing Latin-1 and Devanagari (and Mandarin, and ... Such a thing may not exits, but Notepad++ has shown that a simple(?) plain(?) Text Editor is capable of it. Does anyone know of such a Text Editor? ...Q. Why not a Word Processor? ...A. Because GCC and Python don't like that format! but UTF-8 is fine.

  Read the article

• Virtual folder for multiple sites

  - by Cups

  I am creating a very simple flat file CMS for small (multilingual) websites. The little file writing that goes on is handled by 4 scripts in a publicly available folder in each site named /edit. Given that I have 2 websites now working on that simple system: websiteA/index.php (etc) websiteA/edit/ websiteB/index.php (etc) websiteB/edit/ What is the best way of making that /edit folder "virtual" in order that these and each subsequent website owner can login to their view of /edit and yet the code only exists in one place. I do not want the website owners to have to login from a central website, but from their own /edit directory. I have already read about different solutions seemingly using the <Directory> directive in my httpd.conf declaration for each website, and also using straight mod_rewrite but admit to now becoming confused about some of the terminology. Each website has its own config file which contains path settings and so on. What in your opinion is the best way to handle this? EDIT In light of a reply, I suppose that given a virtual host directive such as this: <VirtualHost 00.00.00.00:80> DocumentRoot /var/www/html/websitea.com ServerName www.websitea.com ServerAlias websitea.com DirectoryIndex index.htm index.php CustomLog logs/websitea combined </VirtualHost> Is it possible to create an alias inside that directive for the folder websitea.com/edit ?

  Read the article

• Windows 7 just deleted 4 days of work

  - by Mat

  Hey! I'm just a bit about to freak out. I just finished a project and rebooted my computer. It didn't want to boot anymore so I had to use the Windows 7 system repair option. It ran for a minute and then booted up. Now most of my source code from the last 4 days of work is gone! Background: sometimes (most often after installing new software) my notebook won't boot up anymore. It will just show the little Windows 7 flag, but not read from the hard disk anymore. If I hard-abort and reboot then, it asks me whether to start Windows normally (which won't work) or to run "Windows startup repair". If I run it, it does some stuff for about two or three minutes and then I can boot Windows again. Usually after this, .exe files I added to the computer during previous days are gone - but other files so far were not touched. But now, after this happened, a whole bunch of ".as" (ActionScript source files) from my project are gone! Does anyone know where and whether there's a way to recover them?

  Read the article

• Windows 7 permissions and Samba domain

  - by Nimzo

  I'm the main desktop support in an office of mixed MacOS and WinXp machines, about 60. I'm new to Windows 7. Currently our XP users are admins on their own machines, and my boss is wanting us to get away from that now that we're going to Windows 7 (64bit). My boss is largely absent from my day-to-day work, so I'm here looking for help =) I have numerous unattended .cmd scripts that we run from a server share, unattended software installs. Some run at login, some have to be run manually. With the NetworkAdmin account logged on to the computer, I am able to run the .cmd files and install stuff just fine. With my test account logged on (Power User), I cannot run the .cmd file - I get an Access Denied. When I change my test account to an Admin on the machine, I still get access denied. However, the test account can simply double-click the .exe and install the software just fine, as admin. Power User can't install anything. How do I fix it so that any power user or admin on the machine can run anything as long as it's on our shared software drive?

  Read the article

< Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >