Search Results

Search found 7546 results on 302 pages for 'mail forwarding'.

Page 295/302 | < Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >

• What precautions should you take when a senior employee leaves?

  - by Mahin

  EDIT : I agree one should check the reasons, why a senior level employee is leaving. But I am interested in knowing the official/management/technical/legal steps one should take after its decided that he is leaving, so that the life after him is smooth. What are the steps management should take when a senior programmer/team lead leaves your company. Some of them which I have thought about are : 1) If He used to manage hosting and domains stuff, change passwords of domain control panels and hosting panels. 2) If your published web sites have maintenance account and he is aware of credentials of that account then change this details also. 3) Suspend mail account for some time and forward all eMails of that account to some ex-employee account. After some time close that account. What are the other things one should check. I am expecting the answer to be a general check list one should follow. It should include both technical scenarios and management scenarios. Notable Suggestions so far : Effectively transfer the responsibilities of that employee to another one without causing any potential delay in your work. Protect your source code. If possible Make them to sign something to say that they don't have copies of source code.. You can also consider NDA here. Use the Notice Period to train his replacement. Now any new code to the project will be done by replacement with the help of Guy who is leaving. Ask him to create a document of things he thinks you should know. Make sure he checks everything in now and then any checkout will only be done by the replacement. Emails, copy off his email account to a pst.file (this assumes Outlook), Make this file available to his replacement. the employee should probably be given a chance to scrub the email. if you are going to keep his account open for whatever reason, check that no rules are created that forward incoming emails to an alternate address. Copy the hard drive of his computer to a network location and have someone senior go through and see if there are any files (drafts of performance reviews or other sensitive issues ) on it that someone else might need. Clearance from Accounts,Finance,Security,Library etc departments.Obtain all company property, laptops, keys, etc. If there is no reason not to, you should reward a departing person for their many years of service. Write them letters of recommendation (even if they already have a new job lined up).Say goodbye, and keep the door open. Make sure any outside clients know that the departing employee is not their main contact anymore. Never neglect the exit interview/debriefing. Confirm the last day of employment so that there is no misunderstanding Inform H/R if the employee is on H1B status, there is paperwork required to notify the government when an H1B employee leaves. Depending on how senior / what position, you might spend some time convincing him not to take the rest of the engineering staff with him. Make sure he spends his last days on a good note, because if he is not leaving on a good note, he can easily pollute the mind of his colleagues. Best Regards, Mahin Gupta EDIT : Now offered a bounty on it to get more detailed responses and practical suggestions.

  Read the article

• jQuery dialog box, php form.

  - by tony noriega

  i have a dialog box that opens on pageload for a site. script type="text/javascript"> $(function() { $('#dialog-message').dialog({ modal: 'true', width: '400' }); }); </script> this pulls up an include: <div id="dialog-message" title="Free Jiu Jitsu Session at Alliance"> <!--#include virtual="/includes/guest.php" --> guest.php has a very small form that is processed by the page itself: <?php $dbh=mysql_connect //login stuff here if (isset($_POST['submit'])) { if (!$_POST['name'] | !$_POST['email']) { echo"<div class='error'>Error<br />Please provide your Name and Email Address so we may properly contact you.</div>"; } else { $age = $_POST['age']; $name = $_POST['name']; $gender = $_POST['gender']; $email = $_POST['email']; $phone = $_POST['phone']; $comments = $_POST['comments']; $query = "INSERT INTO table here (age,name,gender,email,phone,comments) VALUES ('$age','$name','$gender','$email','$phone','$comments')"; mysql_query($query); mysql_close(); $yoursite = "my site here"; $youremail = $email; $subject = "Website Guest Contact Us Form"; $message = "message here"; $email2 = "send to email address"; mail($email2, $subject, $message, "From: $email"); echo"<div class='thankyou'>Thank you for contacting us,<br /> we will respond as soon as we can.</div>"; } } ?> <form id="contact_us" class="guest" method="post" action="/guest.php" > <fieldset> <legend>Personal Info</legend> <label for="name" class="guest">Name:</label> <input type="text" name="name" id="name" value="" /><br> <label for="phone" class="guest">Phone:</label> <input type="text" name="phone" id="phone" value="" /><br> <label for="email" class="guest">Email Address:</label> <input type="text" name="email" id="email" value="" /><br> <label for="age" class="guest">Age:</label> <input type="text" name="age" id="age" value="" size="2" /><br> <label for="gender" class="guest">Sex:</label> <input type="radio" name="gender" value="male" /> Male <input type="radio" name="gender" value="female" /> Female<br /> </fieldset> <fieldset> <legend>Comments</legend> <label for="comments" class="guest">Comments / Questions:</label> <textarea id="comments" name="comments" rows="4" cols="22"></textarea><br> <input type="submit" value="Submit" name="submit" /> <input type="Reset" value="Reset" /> </fieldset> </form> Problem is, that the path of the form action does not work, becasue this dialog box is on the index.html page of the site, and if i put the absolute path, it doesnt process... i have this functioning on another contact us page, so i know it works, but wit the dialog box, it seems to have stumped me... what should i do?

  Read the article

• How do I use connect to DB2 with DBI and mod_perl?

  - by Matthew

  I'm having issues with getting DBI's IBM DB2 driver to work with mod_perl. My test script is: #!/usr/bin/perl use strict; use CGI; use Data::Dumper; use DBI; { my $q; my $dsn; my $username; my $password; my $sth; my $dbc; my $row; $q = CGI->new; print $q->header; print $q->start_html(); $dsn = "DBI:DB2:SAMPLE"; $username = "username"; $password = "password"; print "<pre>".$q->escapeHTML(Dumper(\%ENV))."</pre>"; $dbc = DBI->connect($dsn, $username, $password); $sth = $dbc->prepare("SELECT * FROM SOME_TABLE WHERE FIELD='SOMETHING'"); $sth->execute(); $row = $sth->fetchrow_hashref(); print "<pre>".$q->escapeHTML(Dumper($row))."</pre>"; print $q->end_html; } This script works as CGI but not under mod_perl. I get this error in apache's error log: DBD::DB2::dr connect warning: [unixODBC][Driver Manager]Data source name not found, and no default driver specified at /usr/lib/perl5/site_perl/5.8.8/Apache/DBI.pm line 190. DBI connect('SAMPLE','username',...) failed: [unixODBC][Driver Manager]Data source name not found, and no default driver specified at /data/www/perl/test.pl line 15 First of all, why is it using ODBC? The native DB2 driver is installed (hence it works as CGI). Running Apache 2.2.3, mod_perl 2.0.4 under RHEL5. This guy had the same problem as me: http://www.mail-archive.com/[email protected]/msg22909.html But I have no idea how he fixed it. What does mod_php4 have to do with mod_perl? Any help would be greatly appreciated, I'm having no luck with google. Update: As james2vegas pointed out, the problem has something to do with PHP: I disable PHP all together I get the a different error: Total Environment allocation failure! Did you set up your DB2 client environment? I believe this error is to do with environment variables not being set up correctly, namely DB2INSTANCE. However, I'm not able to turn off PHP to resolve this problem (I need it for some legacy applications). So I now have 2 questions: How can I fix the original issue without disabling PHP all together? How can I fix the environment issue? I've set DB2INSTANCE, DB2_PATH and SQLLIB variables correctly using SetEnv and PerlSetEnv in httpd.conf, but with no luck. Note: I've edited the code to determine if the problem was to do with Global Variable Persistence.

  Read the article

• Popping UIView crashes app

  - by Adun

  I'm basically pushing a UIView from a UITableViewController and all it contains is a UIWebView. However when I remove the UIView to return back to the UITableView the app crashes. - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { // Navigation logic may go here. Create and push another view controller. if (indexPath.row == websiteCell) { NSString *urlPath = [NSString stringWithFormat:@"http://%@", exhibitor.website]; WebViewController *webViewController = [[WebViewController alloc] initWithURLString:urlPath]; // Pass the selected object to the new view controller. [self.parentViewController presentModalViewController:webViewController animated:YES]; [webViewController release]; } } If I comment out the [webViewController release] the app doesn't crash, but I know that this would be a leak. Below is the code for the Web Browser: #import "WebViewController.h" @implementation WebViewController @synthesize webBrowserView; @synthesize urlValue; @synthesize toolBar; @synthesize spinner; @synthesize loadUrl; -(id)initWithURLString:(NSString *)urlString { if (self = [super init]) { urlValue = urlString; } return self; } #pragma mark WebView Controls - (void)goBack { [webBrowserView goBack]; } - (void)goForward { [webBrowserView goForward]; } - (void)reload { [webBrowserView reload]; } - (void)closeBrowser { [self.parentViewController dismissModalViewControllerAnimated:YES]; } #pragma end // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; CGRect contentRect = self.view.bounds; //NSLog(@"%f", contentRect.size.height); float webViewHeight = contentRect.size.height - 44.0f; // navBar = 44 float toolBarHeight = contentRect.size.height - webViewHeight; // navigation bar UINavigationBar *navBar = [[[UINavigationBar alloc] initWithFrame:CGRectMake(0, 20, contentRect.size.width, 44)] autorelease]; navBar.delegate = self; UIBarButtonItem *doneButton = [[[UIBarButtonItem alloc] initWithTitle:@"Done" style:UIBarButtonItemStyleDone target:nil action:@selector(closeBrowser)] autorelease]; UINavigationItem *item = [[[UINavigationItem alloc] initWithTitle:@"CEDIA10"] autorelease]; item.leftBarButtonItem = doneButton; [navBar pushNavigationItem:item animated:NO]; [self.view addSubview:navBar]; // web browser webBrowserView = [[UIWebView alloc] initWithFrame:CGRectMake(0, 64, contentRect.size.width, webViewHeight)]; webBrowserView.delegate = self; webBrowserView.autoresizingMask = UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleHeight; webBrowserView.scalesPageToFit = YES; [self.view addSubview:webBrowserView]; // buttons UIBarButtonItem *backButton = [[[UIBarButtonItem alloc] initWithImage:[UIImage imageNamed:@"arrowleft.png"] style:UIBarButtonItemStylePlain target:self action:@selector(goBack)] autorelease]; UIBarButtonItem *fwdButton = [[[UIBarButtonItem alloc] initWithImage:[UIImage imageNamed:@"arrowright.png"] style:UIBarButtonItemStylePlain target:self action:@selector(goForward)] autorelease]; UIBarButtonItem *refreshButton = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemRefresh target:self action:@selector(reload)] autorelease]; UIBarButtonItem *flexSpace = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemFlexibleSpace target:nil action:nil] autorelease]; UIBarButtonItem *fixSpace = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemFixedSpace target:nil action:nil] autorelease]; [fixSpace setWidth: 40.0f]; spinner = [[[UIActivityIndicatorView alloc] initWithActivityIndicatorStyle:UIActivityIndicatorViewStyleWhite] autorelease]; [spinner startAnimating]; UIBarButtonItem *loadingIcon = [[[UIBarButtonItem alloc] initWithCustomView:spinner] autorelease]; NSArray *toolBarButtons = [[NSArray alloc] initWithObjects: fixSpace, backButton, fixSpace, fwdButton, flexSpace, loadingIcon, flexSpace, refreshButton, nil]; // toolbar toolBar = [[UIToolbar alloc] initWithFrame:CGRectMake(0, webViewHeight, contentRect.size.width, toolBarHeight)]; toolBar.autoresizingMask = UIViewAutoresizingFlexibleTopMargin | UIViewAutoresizingFlexibleWidth; toolBar.items = toolBarButtons; [self.view addSubview:toolBar]; // load the request NSURL *requestString = [NSURL URLWithString:urlValue]; [webBrowserView loadRequest:[NSURLRequest requestWithURL: requestString]]; [toolBarButtons release]; } - (void)viewWillDisappear { if ([webBrowserView isLoading]) { [webBrowserView stopLoading]; webBrowserView.delegate = nil; } } #pragma mark UIWebView - (void)webViewDidStartLoad:(UIWebView*)webView { [spinner startAnimating]; } - (void)webViewDidFinishLoad:(UIWebView*)webView { [spinner stopAnimating]; } - (BOOL)webView:(UIWebView *)webView shouldStartLoadWithRequest:(NSURLRequest *)request navigationType:(UIWebViewNavigationType)navigationType { loadUrl = [[request URL] retain]; if ([[loadUrl scheme] isEqualToString: @"mailto"]) { UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"CEDIA10" message:@"Do you want to open Mail and exit AREC10?" delegate:self cancelButtonTitle:@"No" otherButtonTitles:@"Yes",nil]; [alert show]; [alert release]; return NO; } [loadUrl release]; return YES; } - (void)webView:(UIWebView *)webView didFailLoadWithError:(NSError *)error { [spinner stopAnimating]; if (error.code == -1009) { // no internet connection UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"CEDIA10" message:@"You need an active Internet connection." delegate:self cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert show]; [alert release]; } } #pragma mark UIAlertView - (void)alertView:(UIAlertView *)alertView clickedButtonAtIndex:(NSInteger)buttonIndex { if (buttonIndex == 1) { [[UIApplication sharedApplication] openURL:loadUrl]; [loadUrl release]; } } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. [webBrowserView release]; [urlValue release]; [toolBar release]; [spinner release]; [loadUrl release]; webBrowserView = nil; webBrowserView.delegate = nil; urlValue = nil; toolBar = nil; spinner = nil; loadUrl = nil; } - (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [webBrowserView release]; [urlValue release]; [toolBar release]; [spinner release]; [loadUrl release]; webBrowserView.delegate = nil; urlValue = nil; toolBar = nil; spinner = nil; loadUrl = nil; [super dealloc]; } @end Below this is the crash log that I am getting: Date/Time: 2010-05-13 11:58:20.023 +1000 OS Version: iPhone OS 3.1.3 (7E18) Report Version: 104 Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x00000000, 0x00000000 Crashed Thread: 0 Thread 0 Crashed: 0 libSystem.B.dylib 0x00090b2c __kill + 8 1 libSystem.B.dylib 0x00090b1a kill + 4 2 libSystem.B.dylib 0x00090b0e raise + 10 3 libSystem.B.dylib 0x000a7e34 abort + 36 4 libstdc++.6.dylib 0x00066390 __gnu_cxx::__verbose_terminate_handler() + 588 5 libobjc.A.dylib 0x00008898 _objc_terminate + 160 6 libstdc++.6.dylib 0x00063a84 __cxxabiv1::__terminate(void (*)()) + 76 7 libstdc++.6.dylib 0x00063afc std::terminate() + 16 8 libstdc++.6.dylib 0x00063c24 __cxa_throw + 100 9 libobjc.A.dylib 0x00006e54 objc_exception_throw + 104 10 CoreFoundation 0x00095bf6 -[NSObject doesNotRecognizeSelector:] + 106 11 CoreFoundation 0x0001ab12 ___forwarding___ + 474 12 CoreFoundation 0x00011838 _CF_forwarding_prep_0 + 40 13 QuartzCore 0x0000f448 CALayerCopyRenderLayer + 24 14 QuartzCore 0x0000f048 CA::Context::commit_layer(_CALayer*, unsigned int, unsigned int, void*) + 100 15 QuartzCore 0x0000ef34 CALayerCommitIfNeeded + 336 16 QuartzCore 0x0000eedc CALayerCommitIfNeeded + 248 17 QuartzCore 0x00011ee8 CA::Context::commit_root(void*, void*) + 52 18 QuartzCore 0x00011e80 x_hash_table_foreach + 64 19 QuartzCore 0x00011e2c CA::Transaction::foreach_root(void (*)(void*, void*), void*) + 40 20 QuartzCore 0x0000bb68 CA::Context::commit_transaction(CA::Transaction*) + 1068 21 QuartzCore 0x0000b46c CA::Transaction::commit() + 276 22 QuartzCore 0x000135d4 CA::Transaction::observer_callback(__CFRunLoopObserver*, unsigned long, void*) + 84 23 CoreFoundation 0x0000f82a __CFRunLoopDoObservers + 466 24 CoreFoundation 0x00057340 CFRunLoopRunSpecific + 1812 25 CoreFoundation 0x00056c18 CFRunLoopRunInMode + 44 26 GraphicsServices 0x000041c0 GSEventRunModal + 188 27 UIKit 0x00003c28 -[UIApplication _run] + 552 28 UIKit 0x00002228 UIApplicationMain + 960 29 CEDIA10 0x00002e16 main (main.m:14) 30 CEDIA10 0x00002db8 start + 32 Any ideas on why the app is crashing?

  Read the article

• LDAP over SSL with an EFI Fiery printer

  - by austinian

  I've got a printer with a Fiery running 8e Release 2. I can authenticate users against AD using the LDAP configuration, but I can only get it to work if I don't use SSL/TLS, and only if I use SIMPLE authentication. Right now, it's authenticating using a fairly low-impact user, but it's also the only system on our network that's not using LDAPS. I can get AD info fine over LDAPS using ldp.exe from my machine, our firewall, our mail filter, our linux boxes, etc. The only problem child is the Fiery. I've added the LDAP server certificate as a trusted cert to the Fiery, but after I check the box for Secure Communication and change the port to 636, pressing Validate results in a dialog box coming up saying: LDAP Validation Failed Server Name invalid or server is unavailable. I've tried changing the server name to use just the name, the FQDN, and the IP address, and changed it to another server, just to see if it was just this AD server that was fussy with the Fiery. EDIT: removed LDP output, added packet capture analysis from wireshark: The conversation seems pretty normal to me, up to the point where the Fiery terminates the connection after the server sends back a handshake response. Maybe they messed up their TLS implementation? I'm trying support, but it's been fairly useless so far. The cert is a SHA-2 (sha256RSA) 2048-bit certificate. Also, it looks like the Fiery is specifying TLS 1.0. Looking at http://msdn.microsoft.com/en-us/library/windows/desktop/aa374757(v=vs.85).aspx, I'm not seeing SHA256 and TLS 1.0 combination being supported by SChannel. headdesk perhaps that's why, after the DC changes the cipher spec, the connection is terminated by the Fiery? TLS 1.1 and 1.2 are enabled on the DC. Wireshark conversation: DC: 172.17.2.22, Fiery: 172.17.2.42 No. Time Source Source Port Destination Destination Port Protocol Length Info 1 0.000000000 172.17.2.42 48633 172.17.2.22 ldaps TCP 74 48633 > ldaps [SYN] Seq=0 Win=5840 Len=0 MSS=1460 SACK_PERM=1 TSval=3101761 TSecr=0 WS=4 2 0.000182000 Dell_5e:94:e3 Broadcast ARP 60 Who has 172.17.2.42? Tell 172.17.2.22 3 0.000369000 TyanComp_c9:0f:90 Dell_5e:94:e3 ARP 60 172.17.2.42 is at 00:e0:81:c9:0f:90 4 0.000370000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 74 ldaps > 48633 [SYN, ACK] Seq=0 Ack=1 Win=8192 Len=0 MSS=1460 WS=256 SACK_PERM=1 TSval=67970573 TSecr=3101761 5 0.000548000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=1 Ack=1 Win=5840 Len=0 TSval=3101761 TSecr=67970573 6 0.001000000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 147 Client Hello 7 0.001326000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 8 0.001513000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 9 0.001515000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=1449 Win=8736 Len=0 TSval=3101761 TSecr=67970573 10 0.001516000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=2897 Win=11632 Len=0 TSval=3101761 TSecr=67970573 11 0.001732000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 12 0.001737000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 1243 Server Hello, Certificate, Certificate Request, Server Hello Done 13 0.001738000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=4345 Win=14528 Len=0 TSval=3101761 TSecr=67970573 14 0.001739000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=5522 Win=17424 Len=0 TSval=3101761 TSecr=67970573 15 0.002906000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 78 Certificate 16 0.004155000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 333 Client Key Exchange 17 0.004338000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=361 Win=66304 Len=0 TSval=67970573 TSecr=3101762 18 0.004338000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 72 Change Cipher Spec 19 0.005481000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 327 Encrypted Handshake Message 20 0.005645000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=628 Win=66048 Len=0 TSval=67970574 TSecr=3101762 21 0.010247000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 125 Change Cipher Spec, Encrypted Handshake Message 22 0.016451000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [FIN, ACK] Seq=628 Ack=5581 Win=17424 Len=0 TSval=3101765 TSecr=67970574 23 0.016630000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5581 Ack=629 Win=66048 Len=0 TSval=67970575 TSecr=3101765 24 0.016811000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 60 ldaps > 48633 [RST, ACK] Seq=5581 Ack=629 Win=0 Len=0

  Read the article

• ubuntu ssh does not connect

  - by bocca

  SSH won't be able to establish a connection to our server Here's the output of ssh -vvv: ssh -v -v -v 11.11.11.11 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 11.11.11.11 [11.11.11.11] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.1p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-cbc hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 133/256 debug2: bits set: 486/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts debug3: check_host_in_hostfile: match line 1 debug1: Host '11.11.11.11' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:1 debug2: bits set: 497/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/identity ((nil)) debug2: key: /root/.ssh/id_rsa ((nil)) debug2: key: /root/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /root/.ssh/identity debug3: no such identity: /root/.ssh/identity debug1: Trying private key: /root/.ssh/id_rsa debug3: no such identity: /root/.ssh/id_rsa debug1: Trying private key: /root/.ssh/id_dsa debug3: no such identity: /root/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 57 padlen 7 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug3: tty_make_modes: ospeed 38400 debug3: tty_make_modes: ispeed 38400 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env SSH_AGENT_PID debug3: Ignored env SHELL debug3: Ignored env TERM debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GTK_RC_FILES debug3: Ignored env WINDOWID debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env GNOME_KEYRING_SOCKET debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env MAIL debug3: Ignored env PATH debug3: Ignored env DESKTOP_SESSION debug3: Ignored env PWD debug3: Ignored env GDM_KEYBOARD_LAYOUT debug3: Ignored env GNOME_KEYRING_PID debug1: Sending env LANG = en_CA.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env GDM_LANG debug3: Ignored env GDMSESSION debug3: Ignored env HISTCONTROL debug3: Ignored env SPEECHD_PORT debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env XDG_DATA_DIRS debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env DISPLAY debug3: Ignored env LESSCLOSE debug3: Ignored env XAUTHORITY debug3: Ignored env COLORTERM debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_confirm: type 99 id 0 debug2: shell request accepted on channel 0

  Read the article

• Unusually high memory usage on a CentOS VPS with 512 guaranteed RAM

  - by Andrei Bârsan

  I'm working on a medium-sized web application written in PHP that's running on a VPS with 512mb ram. The webapp hasn't been officially launched yet, so there isn't too much traffic going on, just me and a few other people working on it. There is another slightly smaller webapp also hosted on this machine, among 4-5 other small static sites. We are running Centos 5 32-bit & cPanel/WHM. This is the result of running ps aux and, as you can see, it's not using 100% of the RAM. However, on the hypanel overview, it's always shown as using aroun 500MB ram, just for running apache, mysql, and the lowest-memory-footprint versions of the mail server, ftp server etc. -bash-3.2# ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 2156 664 ? Ss 12:08 0:00 init [3] root 1123 0.0 0.0 2260 548 ? S<s 12:08 0:00 /sbin/udevd -d root 1462 0.0 0.0 1812 568 ? Ss 12:08 0:00 syslogd -m 0 named 1496 0.0 0.0 3808 820 ? Ss 12:08 0:00 nsd named 1497 0.0 0.0 10672 756 ? S 12:08 0:00 nsd named 1499 0.0 0.0 3880 584 ? S 12:08 0:00 nsd root 1514 0.0 0.1 7240 1064 ? Ss 12:08 0:00 /usr/sbin/sshd root 1522 0.0 0.0 2832 832 ? Ss 12:08 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid root 1534 0.0 0.1 3712 1328 ? S 12:08 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql - mysql 1667 0.0 2.9 225680 30884 ? Sl 12:08 0:00 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql - mailnull 1766 0.0 0.1 9352 1100 ? Ss 12:08 0:00 /usr/sbin/exim -bd -q60m root 1797 0.0 0.0 2156 708 ? Ss 12:08 0:00 /usr/sbin/dovecot root 1798 0.0 0.0 2632 1012 ? S 12:08 0:00 dovecot-auth root 1816 0.0 3.0 38580 32456 ? Ss 12:08 0:01 /usr/local/bin/spamd -d --allowed-ips=127.0.0.1 --pidfi root 1839 0.0 1.6 63200 17496 ? Ss 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 1846 0.0 0.1 5416 1468 ? Ss 12:08 0:00 pure-ftpd (SERVER) root 1848 0.0 0.1 6212 1244 ? S 12:08 0:00 /usr/sbin/pure-authd -s /var/run/ftpd.sock -r /usr/sbin root 1856 0.0 0.1 4492 1112 ? Ss 12:08 0:00 crond root 1864 0.0 0.0 2356 428 ? Ss 12:08 0:00 /usr/sbin/atd dovecot 1927 0.0 0.1 5196 1952 ? S 12:08 0:00 pop3-login dovecot 1928 0.0 0.1 5196 1948 ? S 12:08 0:00 pop3-login dovecot 1929 0.0 0.1 5316 2012 ? S 12:08 0:00 imap-login dovecot 1930 0.0 0.2 5416 2228 ? S 12:08 0:00 imap-login root 1939 0.0 0.1 3936 1964 ? S 12:08 0:00 cPhulkd - processor root 1963 0.0 0.8 15876 8564 ? S 12:08 0:00 cpsrvd (SSL) - waiting for connections root 1966 0.0 0.7 15172 7748 ? S 12:08 0:00 cpdavd - accepting connections on 2077 and 2078 root 1990 0.0 0.2 5008 3136 ? S 12:08 0:00 queueprocd - wait to process a task root 2017 0.0 2.9 38580 31020 ? S 12:08 0:00 spamd child root 2018 0.0 0.5 8904 5636 ? S 12:08 0:00 /usr/bin/perl /usr/local/cpanel/bin/leechprotect nobody 2021 0.0 3.2 66512 33724 ? S 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 2022 0.0 3.1 67812 33024 ? S 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 2024 0.0 1.9 64364 20680 ? S 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 2027 0.0 0.4 9000 4540 ? S 12:08 0:00 tailwatchd root 2032 0.0 0.1 4176 1836 ? SN 12:08 0:00 cpanellogd - sleeping for logs nobody 3096 0.0 1.9 64572 20264 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3097 0.0 2.8 66008 30136 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3098 0.0 2.8 65704 29752 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3099 0.0 3.1 67260 32816 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL andrei 3448 0.0 0.1 3204 1632 ? S 12:50 0:00 imap nobody 3537 0.0 1.9 64308 20108 ? S 13:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3614 0.0 1.9 64576 20628 ? S 13:10 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3615 0.0 1.3 63200 14672 ? S 13:10 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 3626 0.0 0.2 10232 2964 ? Rs 13:14 0:00 sshd: root@pts/0 root 3648 0.0 0.1 3844 1600 pts/0 Ss 13:14 0:00 -bash root 3826 0.0 0.0 2532 908 pts/0 R+ 13:21 0:00 ps aux Lately, without any significant changes to the configuration, the memory usage started peaking and going over 512, causing the virtual server to kill apache, basically murdering our site in the process. Do you have any idea if this is normal and more resources should be acquired? I don't think... since there isn't too much data or traffic online yet.

  Read the article

• Why Java servlet can't get Paypal IPN messages everytime ?

  - by Frank

  I have a Java servlet running on my notebook with Windows Vista, I set up a static IP, did port forwarding and registered for a free DDNS service, now my servlet is running, I gave the url to Paypal to send me IPN messages, I went on to it's sandbox site got to the test tools page, tried to send test messages by clicking the "Send IPN" button, most of the time it would fail, the error is : "IPN delivery failed. Unable to connect to the specified URL. Please verify the URL and try again." But maybe 1 in 10 times, it might be successful and my servlet would get the message, and I looked at the messages I got, they are in correct format. So I called Paypal asking why, he said I shouldn't run the servlet on my notebook, in stead I should run it on the web server, but I told him my ISP doesn't support Java on their server, and since I did all the above steps, shouldn't it be the same to run the servlet on my notebook ? He said his test showed he couldn't get to my servlet, but I asked why maybe 1 in 10 times it could get through ? If there is something wrong with running it on my notebook, then 100% times it should fail, am I correct on this point ? But anyway he said that's all he could do, and I should troubleshoot it myself. The servlet looks like this : import java.io.*; import java.net.*; import javax.servlet.*; import javax.servlet.http.*; import java.util.*; public class PayPal_Servlet extends HttpServlet { static boolean Debug=true; static String PayPal_Url="https://www.paypal.com/cgi-bin/webscr",Sandbox_Url="https://www.sandbox.paypal.com/cgi-bin/webscr", Dir_License_Messages="C:/Dir_License_Messages/"; static TransparencyExample Transparency_Example; static PayPal_Message_To_License_File_Worker PayPal_message_to_license_file_worker; // Initializes the servlet. public void init(ServletConfig config) throws ServletException { super.init(config); if (!new File(Dir_License_Messages).exists()) new File(Dir_License_Messages).mkdirs(); System.gc(); } /** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods. * @param request servlet request * @param response servlet response */ protected void processRequest(HttpServletRequest request,HttpServletResponse response) throws ServletException,IOException { // Read post from PayPal system and add 'cmd' Enumeration en=request.getParameterNames(); String str="cmd=_notify-validate"; while (en.hasMoreElements()) { String paramName=(String)en.nextElement(); String paramValue=request.getParameter(paramName); str=str+"&"+paramName+"="+URLEncoder.encode(paramValue); } // Post back to PayPal system to validate // NOTE: change http: to https: in the following URL to verify using SSL (for increased security). // using HTTPS requires either Java 1.4 or greater, or Java Secure Socket Extension (JSSE) and configured for older versions. URL u=new URL(Debug?Sandbox_Url:PayPal_Url); URLConnection uc=u.openConnection(); uc.setDoOutput(true); uc.setRequestProperty("Content-Type","application/x-www-form-urlencoded"); PrintWriter pw=new PrintWriter(uc.getOutputStream()); pw.println(str); pw.close(); BufferedReader in=new BufferedReader(new InputStreamReader(uc.getInputStream())); String res=in.readLine(); in.close(); // Assign posted variables to local variables String itemName=request.getParameter("item_name"); String itemNumber=request.getParameter("item_number"); String paymentStatus=request.getParameter("payment_status"); String paymentAmount=request.getParameter("mc_gross"); String paymentCurrency=request.getParameter("mc_currency"); String txnId=request.getParameter("txn_id"); String receiverEmail=request.getParameter("receiver_email"); String payerEmail=request.getParameter("payer_email"); if (res.equals("VERIFIED")) // Check notification validation { // check that paymentStatus=Completed // check that txnId has not been previously processed // check that receiverEmail is your Primary PayPal email // check that paymentAmount/paymentCurrency are correct // process payment } else if (res.equals("INVALID")) // Log for investigation { } else // Log for error { } // =========================================================================== if (txnId!=null) { Write_File_Safe_Fast(Dir_License_Messages+txnId+".txt",new StringBuffer(str.replace("&","\n")),false); } // =========================================================================== String Message_File_List[]=Tool_Lib.Get_File_List_From_Dir(Dir_License_Messages); response.setContentType("text/html"); PrintWriter out=response.getWriter(); String title="Reading All Request Parameters",Name="",Value; out.println("<Html><Head><Title>"+title+"</Title></Head>\n<Body Bgcolor=\"#FDF5E6\">\n<H1 Align=Center>"+title+"</H1>\n"+ "<Table Border=1 Align=Center>\n"+"<Tr Bgcolor=\"#FFAD00\"><Th>Parameter Name</Th><Th>Parameter Value(s) Messages = "+Message_File_List.length+"</Th></Tr>"); Enumeration paramNames=request.getParameterNames(); while(paramNames.hasMoreElements()) { String paramName=(String)paramNames.nextElement(); out.print("<Tr><Td>"+paramName+"</Td><Td>"); String[] paramValues=request.getParameterValues(paramName); if (paramValues.length == 1) { String paramValue=paramValues[0]; if (paramValue.length() == 0) out.print("<I>No Value</I>"); else { out.println(paramValue+"</Td></Tr>"); // Out("paramName = "+paramName+" paramValue = "+paramValue); // if (paramName.startsWith("Name")) Name=paramValue; // else if (paramName.startsWith("Value")) Write_File_Safe_Fast("C:/Dir_Data/"+Name,new StringBuffer(paramValue),false); } } else { out.println("<Ul>"); for (int i=0;i<paramValues.length;i++) out.println("<Li>"+paramValues[i]); out.println("</Ul></Td</Tr>"); } } out.println("</Table>\n</Body></Html>"); } /** Handles the HTTP <code>GET</code> method. * @param request servlet request * @param response servlet response */ protected void doGet(HttpServletRequest request,HttpServletResponse response) throws ServletException,IOException { processRequest(request,response); } /** Handles the HTTP <code>POST</code> method. * @param request servlet request * @param response servlet response */ protected void doPost(HttpServletRequest request,HttpServletResponse response) throws ServletException,IOException { processRequest(request,response); } // Returns a short description of the servlet. public String getServletInfo() { return "Short description"; } // Destroys the servlet. public void destroy() { System.gc(); } public static void Write_File_Safe_Fast(String File_Path,StringBuffer Str_Buf,boolean Append) { FileOutputStream fos=null; BufferedOutputStream bos=null; try { fos=new FileOutputStream(File_Path,Append); bos=new BufferedOutputStream(fos); for (int j=0;j<Str_Buf.length();j++) bos.write(Str_Buf.charAt(j)); } catch (Exception e) { e.printStackTrace(); } finally { try { if (bos!=null) { bos.close(); bos=null; } if (fos!=null) { fos.close(); fos=null; } } catch (Exception ex) { ex.printStackTrace(); } } System.gc(); } } I use Netbean6.7 to develop the servlet, and the code was from Paypal's JSP sample code, what can I do to debug the problem ?

  Read the article

• vsftpd not allowing uploads. 550 response.

  - by Josh

  I've set vsftpd up on a centos box. I keep trying to upload files but I keep getting "550 Failed to change directory" and "550 Could not get file size." Here's my vsftpd.conf # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES anon_other_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=NO # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES log_ftp_protocol=YES banner_file=/etc/vsftpd/issue local_root=/var/www guest_enable=YES guest_username=ftpusr ftp_username=nobody

  Read the article

• OSX Server 3, Mac clients binding to OD and Profile Manager failing

  - by dbf

  I've made a setup containing a Mac Mini with OSX Server 3 (Mavericks 10.9.2) using Open Directory and Profile Manager (Mail, etc all set up and working). Now the thing is, internally on the local network, everything works great. Clients can bind to the OD and the users are able to login. I can install trust and settings profiles (either custom or group profiles) and all services in the profiles mentioned are being configured correctly. I can log in and out, hump around and do it a 100 times on different macs with different users, it works. My goal is to make this service publicly. The domain is with a FQDN which I own, for simplicity let's say server.domain.com. Now the only way for me to bind the clients to the OD is using LDAP mapping RCF2307 (without SSL) and a DN suffix of dc=server,dc=domain,dc=com using the Directory Utility. The options from server, or open directory will throw several errors like Connection failed to node '/LDAPv3/server.domain.com (2100). First of all I don't really understand the problem why clients can't bind to the OD like it does locally, with and without SSL (all ports are open, literally all ports are open, not just 389,636 and 1640, wasn't sure if I was missing any). When the clients are using LDAP mapping RFC2307 to bind (without SSL only), clients are able to authenticate, login and even load the Trust profile. But every Settings profile will fail with a Debug Message: Unable to find GUID in user record OD or fail to install saying missing user identification. Is there any way to get this to work without RFC2307? Because there is quite some stuff missing when using RFC2307 and not pull the mapping from the server or use open directory. Is this setup even possible? Or should I use VPN to authenticate with the OD? The network setup is a Modem/Router (DHCP off) with WAN NATted to an Airport Extreme (Using DHCP+NAT). The AE does notify with a double NAT message but I haven't had any problems with it on any other service. So WAN - 192.168.2.220 (static), AE - 10.0.1.* (dhcp) Output of DIG from the outside using dig server.domain.com ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.domain.com. IN A ;; ANSWER SECTION: server.domain.com. 77 IN A 91.50.*.* (valid WAN IP) ;; SERVER 172.*.*.1#53(172.*.*.1) (iPhone) DIG locally from a client and server (same output) ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.domain.com. IN A ;; ANSWER SECTION: server.domain.com. 10800 IN A 10.0.1.11 ;; AUTHORITY SECTION: server.domain.com. 10800 IN NS domain.com. (used for email send in relay) server.domain.com. 10800 IN NS server.domain.com. ;; SERVER 10.0.1.11#53(10.0.1.11) Are there any things I should check? Only have OSX. -- double NAT issue, plugged in the server directly on the Modem/Router with a static IP and issue remains. Guess that rules out the double NAT thing. -- changeip -checkhostname comes with There is nothing to change, e.g. success. Primary address = 10.0.1.11 Current HostName = server.domain.com DNS HostName = server.domain.com For now, I've made a workaround by using an admin account that forces a permanent VPN connection on boot. That means before it comes to the login, a connection is already made or underway. I will continue this post when I have more time, also locating all the necessary .log files of each application involved. I have some suspicions but have to debug a bit more when I have more time on my hands .. Unless, of course, I get sidetracked with having a life. Which is arguably not very likely. krypted.com

  Read the article

• FreeBSD 8.1 unstable network connection

  - by frankcheong

  I have three FreeBSD 8.1 running on three different hardware and therefore consist of different network adapter as well (bce, bge and igb). I found that the network connection is kind of unstable which I have tried to scp some 10MB file and found that I cannot always get the files completed successfully. I have further checked with my network admin and he claim that the problem is being caused by the network driver which cannot support the load whereby he tried to ping using huge packet size (around 15k) and my server will drop packet consistently at a regular interval. I found that this statement may not be valid since the three server is using three different network drive and it would be quite impossible that the same problem is being caused by three different network adapter and thus different network driver. Since then I have tried to tune up the performance by playing around with the /etc/sysctl.conf figures with no luck. kern.ipc.somaxconn=1024 kern.ipc.shmall=3276800 kern.ipc.shmmax=1638400000 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Required by pf net.inet.ip.forwarding=1 #Network Performance Tuning kern.ipc.maxsockbuf=16777216 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.recvbuf_max=16777216 # Setting specifically for 1 or even 10Gbps network net.local.stream.sendspace=262144 net.local.stream.recvspace=262144 net.inet.tcp.local_slowstart_flightsize=10 net.inet.tcp.nolocaltimewait=1 net.inet.tcp.mssdflt=1460 net.inet.tcp.sendbuf_auto=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.sendspace=262144 net.inet.tcp.recvspace=262144 net.inet.udp.recvspace=262144 kern.ipc.maxsockbuf=16777216 kern.ipc.nmbclusters=32768 net.inet.tcp.delayed_ack=1 net.inet.tcp.delacktime=100 net.inet.tcp.slowstart_flightsize=179 net.inet.tcp.inflight.enable=1 net.inet.tcp.inflight.min=6144 # Reduce the cache size of slow start connection net.inet.tcp.hostcache.expire=1 Our network admin also claim that they see quite a lot of network up and down from their cisco switch log while I cannot find any up down message inside the dmesg. Have further checked the netstat -s but dont have concrete idea. tcp: 133695291 packets sent 39408539 data packets (3358837321 bytes) 61868 data packets (89472844 bytes) retransmitted 24 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 50756141 ack-only packets (2148 delayed) 0 URG only packets 0 window probe packets 4372385 window update packets 39781869 control packets 134898031 packets received 72339403 acks (for 3357601899 bytes) 190712 duplicate acks 0 acks for unsent data 59339201 packets (3647021974 bytes) received in-sequence 114 completely duplicate packets (135202 bytes) 27 old duplicate packets 0 packets with some dup. data (0 bytes duped) 42090 out-of-order packets (60817889 bytes) 0 packets (0 bytes) of data after window 0 window probes 3953896 window update packets 64181 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 45192 discarded due to memory problems 19945391 connection requests 1323420 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 21133581 connections established (including accepts) 21268724 connections closed (including 32737 drops) 207874 connections updated cached RTT on close 207874 connections updated cached RTT variance on close 132439 connections updated cached ssthresh on close 42392 embryonic connections dropped 72339338 segments updated rtt (of 69477829 attempts) 390871 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 13990 keepalive timeouts 2 keepalive probes sent 13988 connections dropped by keepalive 173044 correct ACK header predictions 36947371 correct data packet header predictions 1323420 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 1323420 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 1323420 cookies sent 0 cookies received 1864 SACK recovery episodes 18005 segment rexmits in SACK recovery episodes 26066896 byte rexmits in SACK recovery episodes 147327 SACK options (SACK blocks) received 87473 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 5141258 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 1 with no checksum 0 dropped due to no socket 129616 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 5011642 delivered 5016050 datagrams output 0 times multicast source filter matched sctp: 0 input packets 0 datagrams 0 packets that had data 0 input SACK chunks 0 input DATA chunks 0 duplicate DATA chunks 0 input HB chunks 0 HB-ACK chunks 0 input ECNE chunks 0 input AUTH chunks 0 chunks missing AUTH 0 invalid HMAC ids received 0 invalid secret ids received 0 auth failed 0 fast path receives all one chunk 0 fast path multi-part data 0 output packets 0 output SACKs 0 output DATA chunks 0 retransmitted DATA chunks 0 fast retransmitted DATA chunks 0 FR's that happened more than once to same chunk 0 intput HB chunks 0 output ECNE chunks 0 output AUTH chunks 0 ip_output error counter Packet drop statistics: 0 from middle box 0 from end host 0 with data 0 non-data, non-endhost 0 non-endhost, bandwidth rep only 0 not enough for chunk header 0 not enough data to confirm 0 where process_chunk_drop said break 0 failed to find TSN 0 attempt reverse TSN lookup 0 e-host confirms zero-rwnd 0 midbox confirms no space 0 data did not match TSN 0 TSN's marked for Fast Retran Timeouts: 0 iterator timers fired 0 T3 data time outs 0 window probe (T3) timers fired 0 INIT timers fired 0 sack timers fired 0 shutdown timers fired 0 heartbeat timers fired 0 a cookie timeout fired 0 an endpoint changed its cookiesecret 0 PMTU timers fired 0 shutdown ack timers fired 0 shutdown guard timers fired 0 stream reset timers fired 0 early FR timers fired 0 an asconf timer fired 0 auto close timer fired 0 asoc free timers expired 0 inp free timers expired 0 packet shorter than header 0 checksum error 0 no endpoint for port 0 bad v-tag 0 bad SID 0 no memory 0 number of multiple FR in a RTT window 0 RFC813 allowed sending 0 RFC813 does not allow sending 0 times max burst prohibited sending 0 look ahead tells us no memory in interface 0 numbers of window probes sent 0 times an output error to clamp down on next user send 0 times sctp_senderrors were caused from a user 0 number of in data drops due to chunk limit reached 0 number of in data drops due to rwnd limit reached 0 times a ECN reduced the cwnd 0 used express lookup via vtag 0 collision in express lookup 0 times the sender ran dry of user data on primary 0 same for above 0 sacks the slow way 0 window update only sacks sent 0 sends with sinfo_flags !=0 0 unordered sends 0 sends with EOF flag set 0 sends with ABORT flag set 0 times protocol drain called 0 times we did a protocol drain 0 times recv was called with peek 0 cached chunks used 0 cached stream oq's used 0 unread messages abandonded by close 0 send burst avoidance, already max burst inflight to net 0 send cwnd full avoidance, already max burst inflight to net 0 number of map array over-runs via fwd-tsn's ip: 137814085 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 1200 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 300 packets reassembled ok 137813009 packets for this host 530 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 61 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 137234598 packets sent from this host 0 packets sent with fabricated ip header 685307 output packets dropped due to no bufs, etc. 52 output packets discarded due to no route 300 output datagrams fragmented 1200 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message Output histogram: echo reply: 305 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored Input histogram: destination unreachable: 530 echo: 305 305 message responses generated 0 invalid return addresses 0 no return routes ICMP address mask responses are disabled igmp: 0 messages received 0 messages received with too few bytes 0 messages received with wrong TTL 0 messages received with bad checksum 0 V1/V2 membership queries received 0 V3 membership queries received 0 membership queries received with invalid field(s) 0 general queries received 0 group queries received 0 group-source queries received 0 group-source queries dropped 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 V3 reports received without Router Alert 0 membership reports sent arp: 376748 ARP requests sent 3207 ARP replies sent 245245 ARP requests received 80845 ARP replies received 326090 ARP packets received 267712 total packets dropped due to no ARP entry 108876 ARP entrys timed out 0 Duplicate IPs seen ip6: 2226633 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 2226633 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 2226633 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 8 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Input histogram: UDP: 2226633 Mbuf statistics: 962679 one mbuf 1263954 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not continuous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 0 failures of source address selection Source addresses selection rule applied: icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output netstat -m 516/5124/5640 mbufs in use (current/cache/total) 512/1634/2146/32768 mbuf clusters in use (current/cache/total/max) 512/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1303/1303/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1153K/9761K/10914K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/8/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 0 requests for I/O initiated by sendfile 0 calls to protocol drain routines Anyone got an idea what might be the possible cause?

  Read the article

• Ruby Gem LoadError mysql2/mysql2 required

  - by Kalli Dalli

  Im trying to setup my rails server on OSX 10.8 but I can't get my rails server to run. - Currently Im using a Zend Server with mysql 5.1. - I also have istalled brew and brew mysql. - And I used: gem install mysql2 -- --srcdir=/usr/local/mysql/include --with-opt-include=/usr/local/mysql/include the server worked already but now, I always get this loadError below. This is what my Gemfile says: ralphs-macbook-pro:admin-mockup zero$ bundle install Using rake (10.0.2) Using i18n (0.6.1) Using multi_json (1.3.7) Using activesupport (3.2.7) Using builder (3.0.4) Using activemodel (3.2.7) Using erubis (2.7.0) Using journey (1.0.4) Using rack (1.4.1) Using rack-cache (1.2) Using rack-test (0.6.2) Using hike (1.2.1) Using tilt (1.3.3) Using sprockets (2.1.3) Using actionpack (3.2.7) Using mime-types (1.19) Using polyglot (0.3.3) Using treetop (1.4.12) Using mail (2.4.4) Using actionmailer (3.2.7) Using arel (3.0.2) Using tzinfo (0.3.35) Using activerecord (3.2.7) Using activeresource (3.2.7) Using annotate (2.5.0) Using coffee-script-source (1.4.0) Using execjs (1.4.0) Using coffee-script (2.2.0) Using rack-ssl (1.3.2) Using json (1.7.5) Using rdoc (3.12) Using thor (0.16.0) Using railties (3.2.7) Using coffee-rails (3.2.2) Using columnize (0.3.6) Using debugger-ruby_core_source (1.1.5) Using debugger-linecache (1.1.2) Using debugger (1.2.2) Using formtastic (2.2.1) Using haml (3.1.7) Using haml-rails (0.3.5) Using hirb (0.7.0) Using hpricot (0.8.6) Using jquery-rails (2.1.4) Using kgio (2.7.4) Using mysql2 (0.3.11) Using php_serialize (1.2) Using polyamorous (0.5.0) Using rabl (0.7.8) Using railroady (1.1.0) Using bundler (1.2.3) Using rails (3.2.7) Using raindrops (0.10.0) Using randumb (0.3.0) Using sass (3.2.3) Using sass-rails (3.2.5) Using squeel (1.0.13) Using uglifier (1.3.0) Using unicorn (4.4.0) Your bundle is complete! Use `bundle show [gemname]` to see where a bundled gem is installed. And after starting rails s /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/mysql2-0.3.11/lib/mysql2.rb:9:in `require': cannot load such file -- mysql2/mysql2 (LoadError) from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/mysql2-0.3.11/lib/mysql2.rb:9:in `<top (required)>' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:68:in `require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:68:in `block (2 levels) in require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:66:in `each' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:66:in `block in require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:55:in `each' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:55:in `require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler.rb:128:in `require' from /Users/zero/GitHub/admin-mockup/config/application.rb:7:in `<top (required)>' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/railties-3.2.7/lib/rails/commands.rb:53:in `require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/railties-3.2.7/lib/rails/commands.rb:53:in `block in <top (required)>' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/railties-3.2.7/lib/rails/commands.rb:50:in `tap' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/railties-3.2.7/lib/rails/commands.rb:50:in `<top (required)>' from script/rails:6:in `require' from script/rails:6:in `<main>' Thx for any help!

  Read the article

• How to restart RoR services after server has been rebooted

  - by Alan DeLonga

  Update I have been searching around to see what services would possibly need to be restarted in my project after reboot. One of them was thinking sphinx, which I finally got to the point where it logs: [Fri Nov 16 19:34:29.820 2012] [29623] accepting connections But I still cant run searchd or searchd --stop because there was no generated sphinx.conf file in the etc/sphinxsearch for more info refer to this open thread on thinking_sphinx after reboot I then turned to looking into restarting unicorn or thin based on some insight I got. The issue is when I check my gems I see one for thin AND unicorn. But when I try to start either one of them they have no file residing in etc/init.d/ where the nginx and sphinxsearch files reside... Would rebooting totally erase the files for an app server like thin or unicorn? We are hosted on Rackspace running ruby 1.9.2p290 rails (3.2.8, 3.2.7, 3.2.0) nginx/1.1.19 notice that there are gems for unicorn and thin but there is no unicorn.rb or thin.rb in my config folder for my app... I am still super lost if any one can give me some insight on some steps to take to figure this out I would really appreciate it. Anything would help, thanks for reading. thin 1.4.1 unicorn 4.3.1 When I run unicorn I get the same issue as referenced here : > /usr/local/bin/unicorn start /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/configurator.rb:610:in `parse_rackup_file': rackup file (start) not readable (ArgumentError) from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/configurator.rb:76:in `reload' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/configurator.rb:67:in `initialize' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/http_server.rb:104:in `new' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/http_server.rb:104:in `initialize' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/bin/unicorn:121:in `new' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/bin/unicorn:121:in `<top (required)>' from /usr/local/bin/unicorn:19:in `load' from /usr/local/bin/unicorn:19:in `<main>' When I run thin it just opens a command line prompt... /usr/local/bin/thin start >> Using rack adapter Other gems: * LOCAL GEMS * actionmailer (3.2.8, 3.2.7, 3.2.0) actionpack (3.2.8, 3.2.7, 3.2.0) activemodel (3.2.8, 3.2.7, 3.2.0) activerecord (3.2.8, 3.2.7, 3.2.0) activeresource (3.2.8, 3.2.7, 3.2.0) activesupport (3.2.8, 3.2.7, 3.2.0) arel (3.0.2) builder (3.0.0) bundler (1.1.5) carmen (1.0.0.beta2) carmen-rails (1.0.0.beta3) cocaine (0.2.1) coffee-rails (3.2.2) coffee-script (2.2.0) coffee-script-source (1.3.3) daemons (1.1.9) erubis (2.7.0) eventmachine (0.12.10) execjs (1.4.0) faraday (0.8.4) faraday_middleware (0.8.8) foursquare2 (1.8.2) geokit (1.6.5) hashie (1.2.0) hike (1.2.1) httparty (0.8.3) httpauth (0.1) i18n (0.6.0) journey (1.0.4) jquery-rails (2.0.2) json (1.7.4, 1.7.3) jwt (0.1.5) kgio (2.7.4) lastfm (1.8.0) libv8 (3.3.10.4 x86_64-linux) mail (2.4.4) mime-types (1.19, 1.18) minitest (1.6.0) multi_json (1.3.6) multi_xml (0.5.1) multipart-post (1.1.5) mysql2 (0.3.11) oauth2 (0.8.0) paperclip (3.1.1) polyglot (0.3.3) rack (1.4.1) rack-cache (1.2) rack-ssl (1.3.2) rack-test (0.6.1) rails (3.2.8, 3.2.7, 3.2.0) railties (3.2.8, 3.2.7, 3.2.0) raindrops (0.10.0, 0.9.0) rake (0.9.2.2, 0.8.7) rdoc (3.12, 2.5.8) riddle (1.5.3) sass (3.2.0, 3.1.19) sass-rails (3.2.5) sprockets (2.1.3) sqlite3 (1.3.6) sqlite3-ruby (1.3.3) therubyracer (0.10.2, 0.10.1) thin (1.4.1) thinking-sphinx (2.0.10) thor (0.16.0, 0.15.4, 0.14.6) tilt (1.3.3) treetop (1.4.10) tzinfo (0.3.33) uglifier (1.2.7, 1.2.4) unicorn (4.3.1) xml-simple (1.1.1) I am working on a project that was built by another group. I made some modifications to a constants file in the config folder (changing some values for arrays that populated some drop down fields), but the app had to be rebooted before those changes would be recognized. The hosting is through Rackspace, we rebooted through the option on their site. I contacted them and checked the status of our server, the port is open and operational. The problem is the app is not running when you go to the address for the site. Then when I put in the ip address of the server it just says "Welcome to Nginx". But in a log files I see: [Thu Nov 15 02:34:37.945 2012] [15916] caught SIGTERM, shutting down [Thu Nov 15 02:34:37.996 2012] [15916] shutdown complete I am not very versed in server side set up. I have also never worked on a Rails project that had to have specific services started before the application will start. Any insight as to how to figure out what services need to be restarted and how to go about restarting them would be greatly appreciated. I feel kind of dead in the water at this point... Thanks, Alan

  Read the article

• Screen Scraping HTML with C#

  - by WildBill

  I have been given the task at work of screen scraping one of our legacy web apps to extract certain data from the code. The data is formatted and "should" be displayed exactly the same every time. I am just not sure how to go about doing this. It's a full html file with header and footer navigations but in the middle of all this is the data I need. I need to extract the Company Name value, Contact Name, Telephone, email address, etc. Here is an example of what the code looks like: ...html above here <br /><br /> <table cellpadding="0" cellspacing="12" border="0"> <tr> <td valign="top" align="center"> <!-- Company Info --> <table cellpadding="0" cellspacing="0" border="0"> <tr> <td class="black"> <table cellspacing="1" cellpadding="0" border="0" width="370"> <tr> <th>ABC INDUSTRIES</th> </tr> <tr> <td class="search"> <table cellpadding="5" cellspacing="0" border="0" width="100%"> <tr> <td> <table cellpadding="1" cellspacing="0" border="0" width="100%"> <tr> <td align="center" colspan="2"><hr></td> </tr> <tr> <td align="right" nowrap><b><font color="FF0000">Contact Person&nbsp;<img src="/images/icon_contact.gif" align="absmiddle">&nbsp;:</font></b></td> <td align="left" width="100%">&nbsp;Joe Smith</td> </tr> <tr> <td align="right" nowrap><b><font color="FF0000">Phone Number&nbsp;<img src="/images/icon_phone.gif" align="absmiddle">&nbsp;:</font></b></td> <td align="left" width="100%">&nbsp;555-555-5555</td> </tr> <tr> <td align="right" nowrap><b><font color="FF0000">E-mail Address&nbsp;<img src="/images/icon_email.gif" align="absmiddle">&nbsp;:</font></b></td> <td align="left" width="100%">&nbsp;<a HREF="mailto:[email protected]">[email protected]</a></td> </tr> more... There is more code on the screen in a different table structure that I also need to pull.

  Read the article

• Bypass cache for mobile user agents, VARNISH+NGINX+W3CACHE

  - by Mike McGhee

  Right now I'm running Wordpress w/ W3 Cache on nginx with varnish front end. I'm trying to use the WP Touch Pro plugin for wordpress to display mobile sites, but it is not working. Shows the desktop theme still. I've put the mobile user agents in the rejected user agents box in w3 cache. Here is the nginx config w3 cache spit out: BEGIN W3TC Page Cache cache location ~ /wp-content/w3tc/pgcache.*html$ { expires modified 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; add_header Vary "Accept-Encoding, Cookie"; } location ~ /wp-content/w3tc/pgcache.*gzip$ { gzip off; types {} default_type text/html; expires modified 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; add_header Vary "Accept-Encoding, Cookie"; add_header Content-Encoding gzip; } # END W3TC Page Cache cache # BEGIN W3TC Browser Cache gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon; location ~ \.(css|js|htc)$ { expires 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } location ~ \.(html|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml)$ { expires 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } location ~ \.(asf|asx|wax|wmv|wmx|avi|bmp|class|divx|doc|docx|eot|exe|gif|gz|gzip|ico|jpg|jpeg|jpe|mdb|mid|midi|mov|qt|mp3|m4a|mp4|m4v|mpeg|mpg|mpe|mpp|otf|odb|odc|odf|odg|odp|ods|odt|ogg|pdf|png|pot|pps|ppt|pptx|ra|ram|svg|svgz|swf|tar|tif|tiff|ttf|ttc|wav|wma|wri|xla|xls|xlsx|xlt|xlw|zip)$ { expires 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } # END W3TC Browser Cache # BEGIN W3TC Minify core rewrite ^/wp-content/w3tc/min/w3tc_rewrite_test$ /wp-content/w3tc/min/index.php?w3tc_rewrite_test=1 last; rewrite ^/wp-content/w3tc/min/(.+\.(css|js))$ /wp-content/w3tc/min/index.php?file=$1 last; # END W3TC Minify core # BEGIN W3TC Page Cache core rewrite ^(.*\/)?w3tc_rewrite_test$ $1?w3tc_rewrite_test=1 last; set $w3tc_rewrite 1; if ($request_method = POST) { set $w3tc_rewrite 0; } if ($query_string != "") { set $w3tc_rewrite 0; } if ($http_host != "mysite.com") { set $w3tc_rewrite 0; } set $w3tc_rewrite2 1; if ($request_uri !~ \/$) { set $w3tc_rewrite2 0; } if ($request_uri ~* "(sitemap(_index)?\.xml(\.gz)?|[a-z0-9_\-]+-sitemap([0-9]+)?\.xml(\.gz)?)") { set $w3tc_rewrite2 1; } if ($w3tc_rewrite2 != 1) { set $w3tc_rewrite 0; } set $w3tc_rewrite3 1; if ($request_uri ~* "(\/wp-admin\/|\/xmlrpc.php|\/wp-(app|cron|login|register|mail)\.php|\/feed\/|wp-.*\.php|index\.php)") { set $w3tc_rewrite3 0; } if ($request_uri ~* "(wp\-comments\-popup\.php|wp\-links\-opml\.php|wp\-locations\.php)") { set $w3tc_rewrite3 1; } if ($w3tc_rewrite3 != 1) { set $w3tc_rewrite 0; } if ($http_cookie ~* "(comment_author|wp\-postpass|wordpress_\[a\-f0\-9\]\+|wordpress_logged_in)") { set $w3tc_rewrite 0; } if ($http_user_agent ~* "(W3\ Total\ Cache/0\.9\.2\.4|iphone|ipod|ipad|aspen|incognito|webmate|android|dream|cupcake|froyo|blackberry9500|blackberry9520|blackberry9530|blackberry9550|blackberry\ 9800|blackberry\ 9780|webos|s8000|bada)") { set $w3tc_rewrite 0; } set $w3tc_ua ""; if ($http_user_agent ~* "(acer\ s100|android|archos5|blackberry9500|blackberry9530|blackberry9550|blackberry\ 9800|cupcake|docomo\ ht\-03a|dream|htc\ hero|htc\ magic|htc_dream|htc_magic|incognito|ipad|iphone|ipod|kindle|lg\-gw620|liquid\ build|maemo|mot\-mb200|mot\-mb300|nexus\ one|opera\ mini|samsung\-s8000|series60.*webkit|series60/5\.0|sonyericssone10|sonyericssonu20|sonyericssonx10|t\-mobile\ mytouch\ 3g|t\-mobile\ opal|tattoo|webmate|webos)") { set $w3tc_ua _high; } set $w3tc_ref ""; set $w3tc_ssl ""; set $w3tc_enc ""; if ($http_accept_encoding ~ gzip) { set $w3tc_enc _gzip; } set $w3tc_ext ""; if (-f "$document_root/wp-content/w3tc/pgcache/$request_uri/_index$w3tc_ua$w3tc_ref$w3tc_ssl.html$w3tc_enc") { set $w3tc_ext .html; } if ($w3tc_ext = "") { set $w3tc_rewrite 0; } if ($w3tc_rewrite = 1) { rewrite .* "/wp- content/w3tc/pgcache/$request_uri/_index$w3tc_ua$w3tc_ref$w3tc_ssl$w3tc_ext$w3tc_enc" last; } # END W3TC Page Cache core And here is what I have in my varnish vcl.. sub vcl_recv { # Add a unique header containing the client address remove req.http.X-Forwarded-For; set req.http.X-Forwarded-For = client.ip; # Device detection set req.http.X-Device = "desktop"; if ( req.http.User-Agent ~ "iP(hone|od|ad)" || req.http.User-Agent ~ "Android" ) { set req.http.X-Device = "smart"; } elseif ( req.http.User-Agent ~ "(SymbianOS|BlackBerry|SonyEricsson|Nokia|SAMSUNG|^LG)" ) { set req.http.X-Device = "cell"; } Any help is greatly appreciated, I've been banging my head against this for 2 days..

  Read the article

• XSLT Select all nodes containing a specific substing

  - by Mike

  I'm trying to write an XPath that will select certain nodes that contain a specific word. In this case the word is, "Lockwood". The correct answer is 3. Both of these paths give me 3. count(//*[contains(./*,'Lockwood')]) count(BusinessLetter/*[contains(../*,'Lockwood')]) But when I try to output the text of each specific node //*[contains(./*,'Lockwood')][1] //*[contains(./*,'Lockwood')][2] //*[contains(./*,'Lockwood')][3] Node 1 ends up containing all the text and nodes 2 and 3 are blank. Can some one please tell me what's happening or what I'm doing wrong. Thanks. <?xml version="1.0" encoding="UTF-8"?> <?xml-stylesheet type="text/xsl" href="XPathFunctions.xsl"?> <BusinessLetter> <Head> <SendDate>November 29, 2005</SendDate> <Recipient> <Name Title="Mr."> <FirstName>Joshua</FirstName> <LastName>Lockwood</LastName> </Name> <Company>Lockwood &amp; Lockwood</Company> <Address> <Street>291 Broadway Ave.</Street> <City>New York</City> <State>NY</State> <Zip>10007</Zip> <Country>United States</Country> </Address> </Recipient> </Head> <Body> <List> <Heading>Along with this letter, I have enclosed the following items:</Heading> <ListItem>two original, execution copies of the Webucator Master Services Agreement</ListItem> <ListItem>two original, execution copies of the Webucator Premier Support for Developers Services Description between Lockwood &amp; Lockwood and Webucator, Inc.</ListItem> </List> <Para>Please sign and return all four original, execution copies to me at your earliest convenience. Upon receipt of the executed copies, we will immediately return a fully executed, original copy of both agreements to you.</Para> <Para>Please send all four original, execution copies to my attention as follows: <Person> <Name> <FirstName>Bill</FirstName> <LastName>Smith</LastName> </Name> <Address> <Company>Webucator, Inc.</Company> <Street>4933 Jamesville Rd.</Street> <City>Jamesville</City> <State>NY</State> <Zip>13078</Zip> <Country>USA</Country> </Address> </Person> </Para> <Para>If you have any questions, feel free to call me at <Phone>800-555-1000 x123</Phone> or e-mail me at <Email>[email protected]</Email>.</Para> </Body> <Foot> <Closing> <Name> <FirstName>Bill</FirstName> <LastName>Smith</LastName> </Name> <JobTitle>VP of Operations</JobTitle> </Closing> </Foot> </BusinessLetter>

  Read the article

• Need help identiying a nasty rootkit in Windows

  - by goofrider

  I have a nasty rootkit that not tools seem to be able to idenity. I know for sure it's a rootkit, but I can figure out which rootkit it is. Here's what I gathered so far: It creates multiple copies of itself in %HOME%\Local Settings\Temp with names like Q.EXE, IAJARZ.exe, etc., and install them as hidden services. These EXE have SysInternals identifiers in them so they're definitely rootkits. It hooked very deep in the system, including file read/write, security policies, registry read/write, and possibly WinSock/TCP/IP. When going to Sophos.com to download their software, the rootkit inject something called Microsoft Ajax Tootkit into the page, which injects code into the email submission form in order to redirect it. (EDIT: I might have panicked. Looks like Sophos does use an AJAZ email form, their form is just broken on Chrome so it looked like a mail form injection attack, the link is http://www.sophos.com/en-us/products/free-tools/virus-removal-tool/download.aspx ) Super-Antispyware found a lot of spyware cookies, in the name of .kaspersky.2o7.net, etc. (just chedk 2o7.net, looks like it's a legit ad company) I tried comparing DNS lookup from the infected systems and from system in other physical locations, no DNS redirections it seems. I used dd to copy the MBR and compared it with the MBR provided by ms-sys package, no differences so it's not infecting MBR. No antivirus or rootkit scanner be able to identify it. Most of them can't even find it. I tried scanning, in-situ (normal mode), in safe mode, and boot to linux live CD. Scanners used: Avast, Sophos anti rootkit, Kasersky TDSSKiller, GMER, RootkitRevealer, and many others. Kaspersky reported some unsigned system files that ought to be signed (e.g. tcpip.sys), and reported a number of MD5 mismatches. But otherwise couldn't identify anything based on signature. When running Sysinternal RootkitRevealer and Sophos AntiRootkit, CPU usage goes up to 100% and gets stucked. The Rootkit is blocking them. When trying running/installing HiJackThis, RootkitRevealer and some other scanners, it tells me system security policy prevent running/installing it. The list of malicious acitivities go on and on. here's a sample of logs from all my scans. In particular, aswSnx.SYS, apnenfno.sys and PROCMON20.SYS has a huge number of hooks. It's hard to tell if the rootkit replaced legit program files like aswSnx.SYS (from Avast) and PROCMON20.SYS (from Sysinternal Process Monitor). I can't find whether apnenfno.sys is from a legit program. Help to identify it is appreciated. Trend Micro RootkitBuster ------ [HIDDEN_REGISTRY][Hidden Reg Value]: KeyPath : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\sptd\Cfg Root : 586bfc0 SubKey : Cfg ValueName : g0 Data : 38 23 E8 D0 BF F2 2D 6F ... ValueType : 3 AccessType: 0 FullLength: 61 DataSize : 32 [HOOKED_SERVICE_API]: Service API : ZwCreateMutant Image Path : C:\WINDOWS\System32\Drivers\aswSnx.SYS OriginalHandler : 0x8061758e CurrentHandler : 0xaa66cce8 ServiceNumber : 0x2b ModuleName : aswSnx.SYS SDTType : 0x0 [HOOKED_SERVICE_API]: Service API : ZwCreateThread Image Path : c:\windows\system32\drivers\apnenfno.sys OriginalHandler : 0x805d1038 CurrentHandler : 0xaa5f118c ServiceNumber : 0x35 ModuleName : apnenfno.sys SDTType : 0x0 [HOOKED_SERVICE_API]: Service API : ZwDeleteKey Image Path : C:\WINDOWS\system32\Drivers\PROCMON20.SYS OriginalHandler : 0x80624472 CurrentHandler : 0xa709b0f8 ServiceNumber : 0x3f ModuleName : PROCMON20.SYS SDTType : 0x0 HiJackThis ------ O23 - Service: JWAHQAGZ - Sysinternals - www.sysinternals.com - C:\DOCUME~1\jeff\LOCALS~1\Temp\JWAHQAGZ.exe O23 - Service: LHIJ - Sysinternals - www.sysinternals.com - C:\DOCUME~1\jeff\LOCALS~1\Temp\LHIJ.exe Kaspersky TDSSKiller ------ 21:05:58.0375 3936 C:\WINDOWS\system32\ati2sgag.exe - copied to quarantine 21:05:59.0217 3936 ATI Smart ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:05:59.0342 3936 C:\WINDOWS\system32\BUFADPT.SYS - copied to quarantine 21:05:59.0856 3936 BUFADPT ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:05:59.0965 3936 C:\Program Files\CrashPlan\CrashPlanService.exe - copied to quarantine 21:06:00.0152 3936 CrashPlanService ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0246 3936 C:\WINDOWS\system32\epmntdrv.sys - copied to quarantine 21:06:00.0433 3936 epmntdrv ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0464 3936 C:\WINDOWS\system32\EuGdiDrv.sys - copied to quarantine 21:06:00.0526 3936 EuGdiDrv ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0604 3936 C:\Program Files\Common Files\Macrovision Shared\FLEXnet Publisher\FNPLicensingService.exe - copied to quarantine 21:06:01.0181 3936 FLEXnet Licensing Service ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0321 3936 C:\Program Files\AddinForUNCFAT\UNCFATDMS.exe - copied to quarantine 21:06:01.0430 3936 OTFSDMS ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0492 3936 C:\WINDOWS\system32\DRIVERS\tcpip.sys - copied to quarantine 21:06:01.0539 3936 Tcpip ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0601 3936 C:\DOCUME~1\jeff\LOCALS~1\Temp\TULPUWOX.exe - copied to quarantine 21:06:01.0664 3936 HKLM\SYSTEM\ControlSet003\services\TULPUWOX - will be deleted on reboot 21:06:01.0664 3936 C:\DOCUME~1\jeff\LOCALS~1\Temp\TULPUWOX.exe - will be deleted on reboot 21:06:01.0664 3936 TULPUWOX ( UnsignedFile.Multi.Generic ) - User select action: Delete 21:06:01.0757 3936 C:\WINDOWS\system32\Drivers\usbaapl.sys - copied to quarantine 21:06:01.0866 3936 USBAAPL ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0913 3936 C:\Program Files\VMware\VMware Player\vmware-authd.exe - copied to quarantine 21:06:02.0443 3936 VMAuthdService ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:02.0443 3936 vmount2 ( UnsignedFile.Multi.Generic ) - skipped by user 21:06:02.0443 3936 vmount2 ( UnsignedFile.Multi.Generic ) - User select action: Skip 21:06:02.0459 3936 vstor2 ( UnsignedFile.Multi.Generic ) - skipped by user 21:06:02.0459 3936 vstor2 ( UnsignedFile.Multi.Generic ) - User select action: Skip

  Read the article

• ERROR: Failed to build gem native extension (mysql2 on rails 3.2.3)

  - by Ryan Arneson

  I'm trying to install the mysql2 gem with Rails 3.2.3 and it's failing: ? bundle install Fetching gem metadata from https://rubygems.org/......... Using rake (0.9.2.2) Using i18n (0.6.0) Using multi_json (1.2.0) Using activesupport (3.2.3) Using builder (3.0.0) Using activemodel (3.2.3) Using erubis (2.7.0) Using journey (1.0.3) Using rack (1.4.1) Using rack-cache (1.2) Using rack-test (0.6.1) Using hike (1.2.1) Using tilt (1.3.3) Using sprockets (2.1.2) Using actionpack (3.2.3) Using mime-types (1.18) Using polyglot (0.3.3) Using treetop (1.4.10) Using mail (2.4.4) Using actionmailer (3.2.3) Using arel (3.0.2) Using tzinfo (0.3.32) Using activerecord (3.2.3) Using activeresource (3.2.3) Using bundler (1.1.3) Using coffee-script-source (1.2.0) Using execjs (1.3.0) Using coffee-script (2.2.0) Using rack-ssl (1.3.2) Using json (1.6.6) Using rdoc (3.12) Using thor (0.14.6) Using railties (3.2.3) Using coffee-rails (3.2.2) Using jquery-rails (2.0.2) Installing mysql2 (0.3.11) with native extensions Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension. /Users/rarneson/.rvm/rubies/ruby-1.9.3-p125/bin/ruby extconf.rb checking for rb_thread_blocking_region()... yes checking for rb_wait_for_single_fd()... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lm... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lz... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lsocket... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lnsl... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lmygcc... no checking for mysql_query() in -lmysqlclient... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/Users/rarneson/.rvm/rubies/ruby-1.9.3-p125/bin/ruby --with-mysql-config --without-mysql-config --with-mysql-dir --without-mysql-dir --with-mysql-include --without-mysql-include=${mysql-dir}/include --with-mysql-lib --without-mysql-lib=${mysql-dir}/lib --with-mysqlclientlib --without-mysqlclientlib --with-mlib --without-mlib --with-mysqlclientlib --without-mysqlclientlib --with-zlib --without-zlib --with-mysqlclientlib --without-mysqlclientlib --with-socketlib --without-socketlib --with-mysqlclientlib --without-mysqlclientlib --with-nsllib --without-nsllib --with-mysqlclientlib --without-mysqlclientlib --with-mygcclib --without-mygcclib --with-mysqlclientlib --without-mysqlclientlib Gem files will remain installed in /Users/rarneson/.rvm/gems/ruby-1.9.3-p125/gems/mysql2-0.3.11 for inspection. Results logged to /Users/rarneson/.rvm/gems/ruby-1.9.3-p125/gems/mysql2-0.3.11/ext/mysql2/gem_make.out An error occured while installing mysql2 (0.3.11), and Bundler cannot continue. Make sure that `gem install mysql2 -v '0.3.11'` succeeds before bundling. I'm running bundle install and this is in my Gemfile: gem 'mysql2', '~> 0.3.11' I've currently got MySQL running through MAMP. I'm not sure if this is a bad idea and I should run a vanilla MySQl but it seems my current problem is just getting the gem installed. I've seen quite a few of these problems here on stackoverflow but all seem a bit different or have really complicated solutions. Is there something I'm missing? Something simple? Something stupid? I can provide additional info from the out file if necessary. I've read that some people use SQLite for dev and test then MySQL in prod but that sounds like a pretty horrible idea.

  Read the article

• local user cannot access vsftpd server

  - by Zloy Smiertniy

  I'm currently running a vsftpd server and I added the necessary configurations in vsftpd.conf so that local users can use clients like FileZilla to manage their homes in a server. I found out that only users in the sudoers list access without a problem only they can't download the files, but users that are not sudoers cannot even access their homes from a client but they can access by a web browser using the FTP protocol and they can only access their home directories (as intented) Im running a fedora 14 on my server and my vsftpd.conf looks like this: # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. ascii_upload_enable=YES ascii_download_enable=YES # # You may fully customise the login banner string: ftpd_banner=Welcome to GAMBITA FTP service # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). chroot_local_user=YES chroot_list_enable=YES # (default follows) chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES use_localtime=YES Anyone has an idea of what might be happening? Nothing concerning vsftpd is written in any log

  Read the article

• xen domUs crashes or unavailability

  - by Rush

  I've xen server with 8 domU. Server is Xeon E31270 with 16gb ram. I think it is enough for 8 machines. Sometimes domU's crashes and i can't figure out the reason. After crash i can connect to console and there is somthing like this: Oct 8 22:20:49 server kernel: [30892.320780] lowmem_reserve[]: 0 0 0 0 Oct 8 22:20:49 server kernel: [30892.320790] Node 0 DMA: 10*4kB 3*8kB 13*16kB 10*32kB 7*64kB 3*128kB 2*256kB 2*512kB 1*1024kB 2*2048kB 0*4096kB = 8080kB Oct 8 22:20:49 server kernel: [30892.320817] Node 0 DMA32: 648*4kB 2*8kB 1*16kB 0*32kB 1*64kB 0*128kB 0*256kB 0*512kB 1*1024kB 1*2048kB 0*4096kB = 5760kB Oct 8 22:20:49 server kernel: [30892.320842] 1491 total pagecache pages Oct 8 22:20:49 server kernel: [30892.320847] 0 pages in swap cache Oct 8 22:20:49 server kernel: [30892.320852] Swap cache stats: add 0, delete 0, find 0/0 Oct 8 22:20:49 server kernel: [30892.320858] Free swap = 0kB Oct 8 22:20:49 server kernel: [30892.320862] Total swap = 0kB Oct 8 22:20:49 server kernel: [30892.324024] 524288 pages RAM Oct 8 22:20:49 server kernel: [30892.324024] 11010 pages reserved Oct 8 22:20:49 server kernel: [30892.324024] 424467 pages shared Oct 8 22:20:49 server kernel: [30892.324024] 503538 pages non-shared Oct 8 22:20:49 server kernel: [30892.330308] apache2 invoked oom-killer: gfp_mask=0x200da, order=0, oom_adj=0 Oct 8 22:20:49 server kernel: [30892.330322] apache2 cpuset=/ mems_allowed=0 Oct 8 22:20:49 server kernel: [30892.330330] Pid: 23938, comm: apache2 Not tainted 2.6.32-5-xen-amd64 #1 Oct 8 22:20:49 server kernel: [30892.330337] Call Trace: Oct 8 22:20:49 server kernel: [30892.330349] [<ffffffff810b7180>] ? oom_kill_process+0x7f/0x23f Oct 8 22:20:49 server kernel: [30892.330358] [<ffffffff810b76a4>] ? __out_of_memory+0x12a/0x141 Oct 8 22:20:49 server kernel: [30892.330367] [<ffffffff810b77fb>] ? out_of_memory+0x140/0x172 Oct 8 22:20:49 server kernel: [30892.330376] [<ffffffff810bb59c>] ? __alloc_pages_nodemask+0x4e5/0x5f5 Oct 8 22:20:49 server kernel: [30892.330385] [<ffffffff810cc224>] ? do_wp_page+0x386/0x707 Oct 8 22:20:49 server kernel: [30892.330395] [<ffffffff8100c3a5>] ? __raw_callee_save_xen_pud_val+0x11/0x1e Oct 8 22:20:49 server kernel: [30892.330404] [<ffffffff8100c369>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e Oct 8 22:20:49 server kernel: [30892.330412] [<ffffffff810cdfc7>] ? handle_mm_fault+0x7aa/0x80f Oct 8 22:20:49 server kernel: [30892.330422] [<ffffffff8130f906>] ? do_page_fault+0x2e0/0x2fc Oct 8 22:20:49 server kernel: [30892.330433] [<ffffffff8130d7a5>] ? page_fault+0x25/0x30 Oct 8 22:20:49 server kernel: [30892.330439] Mem-Info: Oct 8 22:20:49 server kernel: [30892.330443] Node 0 DMA per-cpu: Oct 8 22:20:49 server kernel: [30892.330450] CPU 0: hi: 0, btch: 1 usd: 0 Oct 8 22:20:49 server kernel: [30892.330463] CPU 1: hi: 0, btch: 1 usd: 0 Oct 8 22:20:49 server kernel: [30892.330466] Node 0 DMA32 per-cpu: Oct 8 22:20:49 server kernel: [30892.330469] CPU 0: hi: 186, btch: 31 usd: 0 Oct 8 22:20:49 server kernel: [30892.330472] CPU 1: hi: 186, btch: 31 usd: 60 Oct 8 22:20:49 server kernel: [30892.330476] active_anon:342076 inactive_anon:115398 isolated_anon:0 Oct 8 22:20:49 server kernel: [30892.330477] active_file:268 inactive_file:481 isolated_file:0 Oct 8 22:20:49 server kernel: [30892.330477] unevictable:1125 dirty:2 writeback:13 unstable:0 Oct 8 22:20:49 server kernel: [30892.330478] free:3410 slab_reclaimable:1718 slab_unreclaimable:6946 Oct 8 22:20:49 server kernel: [30892.330478] mapped:899 shmem:113 pagetables:35697 bounce:0 Oct 8 22:20:49 server kernel: [30892.330502] Node 0 DMA free:8036kB min:32kB low:40kB high:48kB active_anon:1144kB inactive_anon:1268kB active_file:8kB inactive_file:8kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:11792kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:224kB kernel_stack:16kB pagetables:1228kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Oct 8 22:20:49 server kernel: [30892.330518] lowmem_reserve[]: 0 2004 2004 2004 Oct 8 22:20:49 server kernel: [30892.330523] Node 0 DMA32 free:5604kB min:5708kB low:7132kB high:8560kB active_anon:1367160kB inactive_anon:460324kB active_file:1064kB inactive_file:1916kB unevictable:4500kB isolated(anon):0kB isolated(file):0kB present:2052320kB mlocked:4500kB dirty:8kB writeback:52kB mapped:3600kB shmem:452kB slab_reclaimable:6872kB slab_unreclaimable:27560kB kernel_stack:3528kB pagetables:141560kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:992 all_unreclaimable? no Oct 8 22:20:49 server kernel: [30892.330539] lowmem_reserve[]: 0 0 0 0 Oct 8 22:20:49 server kernel: [30892.330544] Node 0 DMA: 1*4kB 2*8kB 13*16kB 10*32kB 7*64kB 3*128kB 2*256kB 2*512kB 1*1024kB 2*2048kB 0*4096kB = 8036kB Oct 8 22:20:49 server kernel: [30892.330579] Node 0 DMA32: 609*4kB 2*8kB 1*16kB 0*32kB 1*64kB 0*128kB 0*256kB 0*512kB 1*1024kB 1*2048kB 0*4096kB = 5604kB Oct 8 22:20:49 server kernel: [30892.330605] 1522 total pagecache pages Oct 8 22:20:49 server kernel: [30892.330610] 0 pages in swap cache Oct 8 22:20:49 server kernel: [30892.330615] Swap cache stats: add 0, delete 0, find 0/0 Oct 8 22:20:49 server kernel: [30892.330621] Free swap = 0kB Oct 8 22:20:49 server kernel: [30892.330625] Total swap = 0kB Oct 8 22:20:49 server kernel: [30892.333018] 524288 pages RAM Oct 8 22:20:49 server kernel: [30892.333018] 11010 pages reserved Oct 8 22:20:49 server kernel: [30892.333018] 424367 pages shared Oct 8 22:20:49 server kernel: [30892.333018] 503658 pages non-shared Seems like there isn't enough memory for this domU. But there is no any memory problems reported in munin monitoring: As you see system uses around 0.2G and 1G is available. So my question is: Is it xen specific problem, that real memory usage and memory usage that shows munin are different (I've never seen such problems oh real hardware machines)? Or maybe it is just monitoring problem, that can't catch moment when there is unusual high load and domU go down? And how I can to defeat this problem? it is really annoying to catch messages in e-mail that domU went down. Btw, such situation was when domU had 2G memory.

  Read the article

• CSC folder data access AND roaming profiles issues (Vista with Server 2003, then 2008)

  - by Alex Jones

  I'm a junior sysadmin for an IT contractor that helps small, local government agencies, like little towns and the like. One of our clients, a public library with ~ 50 staff users, was recently migrated from Server 2003 Standard to Server 2008 R2 Standard in a very short timeframe; our senior employee, the only network engineer, had suddenly put in his two weeks notice, so management pushed him to do this project before quitting. A bit hasty on management's part? Perhaps. Could we do anything about that? Nope. Do I have to fix this all by myself? Pretty much. The network is set up like this: a) 50ish staff workstations, all running Vista Business SP2. All staff use MS Outlook, which uses RPC-over-HTTPS ("Outlook Anywhere") for cached Exchange access to an offsite location. b) One new (virtualized) Server 2008 R2 Standard instance, running atop a Server 2008 R2 host via Hyper-V. The VM is the domain's DC, and also the site's one and only file server. Let's call that VM "NEWBOX". c) One old physical Server 2003 Standard server, running the same roles. Let's call it "OLDBOX". It's still on the network and accessible, but it's been demoted, and its shares have been disabled. No data has been deleted. c) Gigabit Ethernet everywhere. The organization's only has one domain, and it did not change during the migration. d) Most users were set up for a combo of redirected folders + offline files, but some older employees who had been with the organization a long time are still on roaming profiles. To sum up: the servers in question handle user accounts and files, nothing else (eg, no TS, no mail, no IIS, etc.) I have two major problems I'm hoping you can help me with: 1) Even though all domain users have had their redirected folders moved to the new server, and loggin in to their workstations and testing confirms that the Documents/Music/Whatever folders point to the new paths, it appears some users (not laptops or anything either!) had been working offline from OLDBOX for a long time, and nobody realized it. Here's the ugly implication: a bunch of their data now lives only in their CSC folders, because they can't access the share on OLDBOX and sync with it finally. How do I get this data out of those CSC folders, and onto NEWBOX? 2) What's the best way to migrate roaming profile users to non-roaming ones, without losing vital data like documents, any lingering PSTs, etc? Things I've thought about trying: For problem 1: a) Reenable the documents share on OLDBOX, force an Offline Files sync for ALL domain users, then copy OLDBOX's share's data to the equivalent share on NEWBOX. Reinitialize the Offline Files cache for every user. With this: How do I safely force a domain-wide Offline Files sync? Could I lose data by reenabling the share on OLDBOX and forcing the sync? Afterwards, how can I reinitialize the Offline Files cache for every user, without doing it manually, workstation by workstation? b) Determine which users have unsynced changes to OLDBOX (again, how?), search each user's CSC folder domain-wide via workstation admin shares, and grab the unsynched data. Reinitialize the Offline Files cache for every user. With this: How can I detect which users have unsynched changes with a script? How can I search each user's CSC folder, when the ownership and permissions set for CSC folders are so restrictive? Again, afterwards, how can I reinitialize the Offline Files cache for every user, without doing it manually, workstation by workstation? c) Manually visit each workstation, copy the contents of the CSC folder, and manually copy that data onto NEWBOX. Reinitialize the Offline Files cache for every user. With this: Again, how do I 'break into' the CSC folder and get to its data? As an experiment, I took one workstation's HD offsite, imaged it for safety, and then tried the following with one of our shop PCs, after attaching the drive: grant myself full control of the folder (failed), grant myself ownership of the folder (failed), run chkdsk on the whole drive to make sure nothing's messed up (all OK), try to take full control of the entire drive (failed), try to take ownership of the entire drive (failed) MS KB articles and Googling around suggests there's a utility called CSCCMD that's meant for this exact scenario...but it looks like it's available for XP, not Vista, no? Again, afterwards, how can I reinitialize the Offline Files cache for every user, without doing it manually, workstation by workstation? For problem 2: a) Figure out which users are on roaming profiles, and where their profiles 'live' on the server. Create new folders for them in the redirected folders repository, migrate existing data, and disable the roaming. With this: Finding out who's roaming isn't hard. But what's the best way to disable the roaming itself? In AD Users and Computers, or on each user's workstation? Doing it centrally on the server seems more efficient; that said, all of the KB research I've done turns up articles on how to go from local to roaming, not the other way around, so I don't have good documentation on this. In closing: we have good backups of NEWBOX and OLDBOX, but not of the workstations themselves, so anything drastic on the client side would need imaging and testing for safety. Thanks for reading along this far! Hopefully you can help me dig us out of this mess.

  Read the article

• firefox, opera 'The connection was reset' on few POST method calls on Windows and Ubuntu

  - by Gopalakrishnan Subramani

  my website works well with GET method, also few POST methods. Some pages with POST method doesn't work. Some pages with POST work. For example, login page uses POST that works fine. When I post the data on webpage, firefox says "Connecting..." and finally report connection timed out error. The same behavior happens with Opera as well. However Google Chrome works fine. At the server side, I use nginx 1.2.4 with HTTPS and uwsgi for python (flask framework) app. I use geotrust certificate. The same behavior happens with Windows 7 and Ubuntu 12.04 on firefox. I tried firefox in safemode, but no luck. Set auto-detect proxy settings. no luck. Cleared all cookies. no luck Anyone help me to fix this issue? I am posting ngix config. shame on me. I use root, I know which is not advised. need to fix soon. user root; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; server { listen 80; server_name www.example.com; rewrite ^(.*) https://example.com$1 permanent; } server { listen 80; server_name example.com; rewrite ^ https://$server_name$request_uri? permanent; } server { listen 443; server_name example.com; keepalive_timeout 70; ssl on; ssl_certificate /root/cc.cert; ssl_certificate_key /root/cc.key; ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; #ssl_ciphers HIGH:!aNULL:!MD5; ssl_ciphers RC4:HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; location / { try_files $uri @app; } location @app { include uwsgi_params; uwsgi_pass unix:/tmp/uwsgi.sock; } } } #mail { # # See sample authentication script at: # # http://wiki.nginx.org/ImapAuthenticateWithApachePhpScript # # # auth_http localhost/auth.php; # # pop3_capabilities "TOP" "USER"; # # imap_capabilities "IMAP4rev1" "UIDPLUS"; # # server { # listen localhost:110; # protocol pop3; # proxy on; # } # # server { # listen localhost:143; # protocol imap; # proxy on; # } #}

  Read the article

• Create / build / generate a web form that can be on my server and has modern looks and could be impl

  - by Luay

  I have a small web site and would like to add a 'contact us' form and a 'feedback' form. i would like the forms to satisfy the following: 1- be modern looking (with beautiful css effects) 2- the form fields are validated properly and 'inline'. What I mean is once a user skips a required field or enters an email address incorrectly some kind of tooltip or icon is displayed to ask him to cerrect the error (as opposed to a message box that appears after the user clicks 'submit') 3- once the submit button is clicked the form contents are emailed to me. 4- the whole thing can be setup by a noob like myself. 5- no ads on the form I have been searching for at least 5 days for a solution but I can't seem to find anything the would satisfy the above 5 conditions. I don't mind paying for a solution as long as it is hosted on my site and it is a one off payment and not a monthly payment. So far my search has lead me to the following: 1 wufoo. The good: the generated forms seem to look okay but not the best there is. The bad: the free service is limited to 100 submissions. ads on the form. it is not hosted on my server. Paid service requires monthly payments 2- emailmeform: almost same as above except the generated form looks old. They do have an offer where you pay only $4 to get the form and set it up on your own site but that doesn't solve the fact that the forms look old. 3- formAssembly: same as above with minor variations (the generated form looks better) 4- formchamp, formthis, kontaktr,... And other similar online services: the same problem. either the form generated looks outdated or require monthly payments or they put ads...they don't satisfy my conditions. 5- coffeecup form builder. a desktop software. The problem is the generated forms look too old and use flash. 6- simfatic. Another software. Much better than coffeecup. almost satisfies my conditions but the forms not as good as I like. 7- many, many php scripts or html templates that look so outdated or fail when tested (probably because they are too old). Seriously guys, how hard is this. At least 90%+ of website contain at least a 'contact us' form. Why aren't there better solutions? if there is I can't seem to find them. In terms of looks I want something similar to this: http://web-kreation.com/articles/lightform-free-ajaxphp-contact-form/ It is called lightform. And this is a perfect example of what I mean by 'inline' validation. the only problem: there is no script to handle sending the mail. Even if I find one, I don't know how to modify it for my needs. So could you please help me out. I really can't search anymore. I reached rock bottom with this issue. I need a complete solution. If nothing exists then at least a: 1- form template (html) that looks nice and can easily be modified 2- a validation script that does 'inline' validation like the example above (or similar to it) and can be easily implemented by a noob like me to work with the html form. 3- a php script that will handle sending the email and can be easily implemented (all three working in harmony). I hope there is a complete solution but am I asking for too much? Pretty please...help...

  Read the article

• HTML form isn't emailing

  - by Anonmattymous

  I have this as my form <div class="contactInputs"> <p>Send us a message</p> <form class="messageForm" autocomplete="on" name="contactform" method="post" action="/freequote.php"> <input type="text" name="name" placeholder="Name*" required> <input type="text" name="companyname" placeholder="Company Name"> <input type="email" name="email" placeholder="Email*" required> <input type="tel" name="phone" placeholder="Phone"> <input class="contact-submit" type="submit"> </form> <textarea type="textarea" name="message" placeholder="Your Messages*" required></textarea> </div> And this is the PHP used to do send the Email. <?php if(isset($_POST['email'])) { $email_to = "[email protected]"; $email_subject = "Your email subject line"; function died($error) { echo "We are very sorry, but there were error(s) found with the form you submitted. "; echo "These errors appear below.<br /><br />"; echo $error."<br /><br />"; echo "Please go back and fix these errors.<br /><br />"; die(); } if(!isset($_POST['name']) || !isset($_POST['companyname']) || !isset($_POST['email']) || !isset($_POST['phone']) || !isset($_POST['comments'])) { died('We are sorry, but there appears to be a problem with the form you submitted.'); } $name = $_POST['name']; $companyname = $_POST['companyname']; $email_from = $_POST['email']; $phone = $_POST['phone']; $message = $_POST['comments']; $error_message = ""; $email_exp = '/^[A-Za-z0-9._%-]+@[A-Za-z0-9.-]+\.[A-Za-z]{2,4}$/'; if(!preg_match($email_exp,$email_from)) { $error_message .= 'The Email Address you entered does not appear to be valid.<br />'; } $string_exp = "/^[A-Za-z .'-]+$/"; if(!preg_match($string_exp,$name)) { $error_message .= 'The First Name you entered does not appear to be valid.<br />'; } if(!preg_match($string_exp,$companyname)) { $error_message .= 'The Last Name you entered does not appear to be valid.<br />'; } if(strlen($message) < 2) { $error_message .= 'The Comments you entered do not appear to be valid.<br />'; } if(strlen($error_message) > 0) { died($error_message); } $email_message = "Form details below.\n\n"; function clean_string($string) { $bad = array("content-type","bcc:","to:","cc:","href"); return str_replace($bad,"",$string); } $email_message .= "First Name: ".clean_string($name)."\n"; $email_message .= "Last Name: ".clean_string($companyname)."\n"; $email_message .= "Email: ".clean_string($email_from)."\n"; $email_message .= "phone: ".clean_string($phone)."\n"; $email_message .= "Comments: ".clean_string($message)."\n"; $headers = 'From: '.$email_from."\r\n". 'Reply-To: '.$email_from."\r\n" . 'X-Mailer: PHP/' . phpversion(); @mail($email_to, $email_subject, $email_message, $headers); ?> Thank you for contacting us. We will be in touch with you very soon. <?php } ?> But whenever i try to submit it, i get the errors We are very sorry, but there were error(s) found with the form you submitted. These errors appear below. We are sorry, but there appears to be a problem with the form you submitted. Please go back and fix these errors. Does anyone see whats wrong

  Read the article

• php form doesnt submit one of the fields

  - by steve

  i have bought a template that have built in contact form problem is that it submits every thing except "company" name i have spent few hours messing around with it but cant get to work it. if you can point me to some solution i would be greatful thanks in advance this is contact form <form action="php/contact.php" method="post" id="contactform"> <ol> <li> <label for="name">your name <span class="red">*</span></label> <input id="name" name="name" class="text" /> </li> <li> <label for="email">Your email <span class="red">*</span></label> <input id="email" name="email" class="text" /> </li> <li> <label for="company">Company Name</label> <input id="company" name="company" class="text" /> </li> <li> <label for="subject">Subject</label> <input id="subject" name="subject" class="text" /> </li> <li> <label for="message">Message <span class="red">*</span></label> <textarea id="message" name="message" rows="6" cols="50"></textarea> </li> <li class="buttons"> <input type="image" name="imageField" id="imageField" src="images/button.jpg" /> </li> </ol> </form> this is java script <script type="text/javascript"> // <![CDATA[ jQuery(document).ready(function(){ $('#contactform').submit(function(){ var action = $(this).attr('action'); $.post(action, { name: $('#name').val(), email: $('#email').val(), company: $('#company').val(), subject: $('#subject').val(), message: $('#message').val() }, function(data){ $('#contactform #submit').attr('disabled',''); $('.response').remove(); $('#contactform').before('<p class="response">'+data+'</p>'); $('.response').slideDown(); if(data=='Thanks for your message, will contact you soon.') $('#contactform').slideUp(); } ); return false; }); }); // ]]> </script> this is php script if(!$_POST) exit; $email = $_POST['email']; //$error[] = preg_match('/\b[A-Z0-9._%-]+@[A-Z0-9.-]+.[A-Z]{2,4}\b/i', $POST['email']) ? '' : 'INVALID EMAIL ADDRESS'; if(!eregi("^[a-z0-9]+([\.-][a-z0-9]+)" ."@"."([a-z0-9]+([.-][a-z0-9]+))+"."\.[a-z]{2,}"."$",$email )){ $error.="Invalid email address entered"; $errors=1; } if($errors==1) echo $error; else{ $values = array ('name','email','message'); $required = array('name','email','message'); $your_email = "[email protected]"; $email_subject = "New Message: ".$_POST['subject']; $email_content = "new message:\n"; foreach($values as $key => $value){ if(in_array($value,$required)){ if ($key != 'subject' && $key != 'company') { if( empty($_POST[$value]) ) { echo 'Please fill in all required fields, marked with *'; exit; } } $email_content .= $value.': '.$_POST[$value]."\n"; } } if(@mail($your_email,$email_subject,$email_content)) { echo 'Thanks for your message, will contact you soon.'; } else { echo 'ERROR!'; } }

  Read the article

< Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >